VT229 Series
LCD Monitor
User Guide
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
•
This device may not cause harmful interference
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
Declaration of Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating
to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive
(2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/
EU).
iii
This product has been tested and found to comply with the harmonized
standards for Information Technology Equipment, these harmonized
standards published under Directives of Official Journal of the European
Union.
Safety information
•
•
•
•
•
Before setting up the monitor, carefully read all the documentation that
came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extention cords. Overloading can
result in fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
•
Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
•
•
Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100-240V AC.
•
If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
iv
•
The wall socket shall be installed near the equipment and shall be
easily accessible.
Remark: Suitable for entertainment purposes at specially controlled
luminous indoor environments, to avoid disturbing reflections from the
screen.
v
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying
to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for
energy efficiency.
vi
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
vii
1.1
Welcome!
Thank you for purchasing the ASUS® VT229 Series LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the VT229 Series brings you!
1.2
Package contents
Check your VT229 Series LCD package for the following items:
LCD monitor
Monitor base
Quick start guide
1 x Power cord
1 x VGA cable
1 x Audio cable (optional)
1 x HDMI cable (optional)
1
x
USB type-B cable (only for touch function)
1 x Warranty card
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LCD Monitor VT229
1-1
1.3
Assembling the monitor base
To assemble the monitor base:
1. Place the display flat on a cloth on the table. Then attach the base
to the arm and fix with the screw to join them tightly. You can easily
tighten the screw by fingers.
2. Adjust the monitor to the angle that is most comfortable for you.
We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
2
1
1.4
Connecting cables
To connect cables:
Connect the cables you need based on chapter 1.5.2, page1-4.
Chapter 1: Product Introduction
1-2
1.5
Monitor introduction
1.5.1
Front of the LCD monitor
1
2
3
4
5
6
7
1.
Shortcut key2
This is a Shortcut key. The default setting is Blue Light Filter.
Shortcut key1
This is a Shortcut key. The default setting is Brightness.
:
•
2.
:
•
3. Input Select:
•
•
•
•
Input Select: Use this hotkey to switch from input signal.
4.
5.
6.
Close Button:
Exit the OSD menu.
MENU Button:
Press this button to enter the OSD menu.
Power Button:
Press this button to turn the monitor on/off.
7. Power Indicator:
The color definition of the power indicator is as the table below.
•
Status
White
Amber
OFF
Description
ON
Standby mode
OFF
ASUS LCD Monitor VT229
1-3
1.5.2
Rear of the LCD monitor
8
7
1
HDMI
VGA
1
2
3
4
5
6
1. AC-IN port
2. HDMI port
3. VGA port
4. Earphone Out port
5. USB type-B port (only for touch function)
6. Control buttons
7. Kensington Lock
8. Screw holes for VESA Wall Mount
Chapter 1: Product Introduction
1-4
2.1
Detaching the base/stand
(for VESA wall mount)
The detachable stand of the LCD monitor is specially designed for VESA
wall mount.
To detach the arm/stand:
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use your finger to loosen the screw located at the bottom of the base,
and remove the base from the stand. And then remove the hinge
cover from monitor body by using your fingers.
3. Use a screwdriver to remove the four screws on the arm, and then
detach the arm/stand from the monitor.
•
We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
•
Hold the stand of the monitor while removing the screws.
2
1
•
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/
load 4.8kg according to the model listed in the specification table
(Screw size: M4 x 10 mm).
ASUS LCD Monitor VT229
2-1
2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
•
Hold the stand to prevent the monitor from falling while changing its
angle.
•
•
You can adjust the monitor’s angle from -5˚ to 20˚.
Do not touch the Touch screen when you change the angle. It may
cause damage or break the Touch screen and LCD screen.
-5 ~ 20
Chapter 2: Setup
2-2
3.1
Touch Operation
•
ASUS VT229 is a touch monitor which uses 10 point touch panel
technology. Please use with latest OS like Windows 10.
•
You can use either single finger touch, or multi-finger touch up to
maximum simultaneous 10 touch points.
10-Point Touch
•
To activate touch functionality, you need to connect the display with the
provided USB type-B cable to your computer.
•
•
You do not need to install any other software.
ASUS VT229 offers you groovy touch gestures like tap, grab, pinch,
rotate, zoom, swipe, etc. The gestures allow you to launch programs
and access the setting of your ASUS VT229 Display. The functions can
be activated by using the hand gestures to ASUS VT229.
Left edge swipe (on Windows 7/8/8.1/10 only)
Swipe from the left edge of the screen to shuffle your running apps.
Right edge swipe (on Windows 7/8/8.1/10 only)
Swipe from the right edge of the screen to launch the Charm bar.
ASUS LCD Monitor VT229
3-1
Finger slide (on Windows 7/8/8.1/10 only)
Slide your finger to scroll up and down and slide your finger to pan the
screen left or right.
Zoom out
Bring together your two fingers on the touch panel.
Zoom in
Spread apart your two fingers on the touch panel.
Chapter 3: Touch operation
3-2
Single Tap/Double tap
Single Tap
Touch the target on the screen with one fingertip for one quick tap, then
release.
Double Tap
Touch the target on the screen with one fingertip for two quick taps, then
release.
Tap an app to launch it (on Windows 7/8/8.1/10 only).
Double-tap an item to launch it.
ASUS LCD Monitor VT229
3-3
Tap and hold
To move an app, tap and hold the app tile and drag it to a new location.
To close an app (on Windows 7/8/8.1/10 only), tap and hold the top side of
the running app and drag it down to the bottom of the screen to close it.
NOTE:• You can access to OS website to get more description
on touch operation.
• Do not touch the screen with sharp objects, it may result in
damage, and void warranty.
• Do not push hard, or rest anything on the glass surface (if
in horizontal position) as it will damage the screen and void
warranty.
• Please keep your hands clean and dry before touching the
screen to ensure fluid touch operation.
• The touch function works only on OS and applications which
support touch functions.
Chapter 3: Touch operation
3-4
4.1
OSD (On-Screen Display) menu
4.1.1
How to reconfigure
ASUS VT229
Standard Mode VGA 1920x1080@60Hz
S
Splendid
Standard Mode
sRGB Mode
Scenery Mode
Theater Mode
Game Mode
Night View Mode
Reading Mode
Darkroom Mode
1. Press the [MENU] button to activate the OSD menu.
2. Press and buttons to toggle between options in the Menu. As
you move from one icon to another, the option name is highlighted.
3. To select the highlighted item on the menu press the
button.
4. Press and buttons to select the desired parameter.
5. Press the
button to enter the slide bar and then use the or
buttons, according to the indicators on the menu, to make your
changes.
6. Press the
menu.
button to return to previous menu or to close OSD
4.1.2
1. Splendid
This function contains eight sub-functions that you can select for
OSD Function Introduction
your preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
Chapter 4: General Instruction
4-1
ASUS VT229
Standard Mode VGA 1920x1080@60Hz
S
Splendid
Standard Mode
sRGB Mode
Scenery Mode
Theater Mode
Game Mode
Night View Mode
Reading Mode
Darkroom Mode
•
•
•
•
•
•
Standard Mode: This is the best choice for document editing
with SPLENDID™ Video Enhancement.
sRGB: This is the best choice for viewing photos and graphics
from PCs.
Scenery Mode: This is the best choice for scenery photo
displaying with SPLENDID™ Video Enhancement.
Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Enhancement.
Game Mode: This is the best choice for game playing with
SPLENDID™ Video Enhancement.
Night View Mode: This is the best choice for playing dark-
scene game or watching movie with SPLENDID™ Video
Enhancement.
•
•
Reading Mode : This is the best choice for book reading.
Darkroom Mode : This is the best choice for a weak ambient
light environmen.
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and
ASCR functions are not user-configurable.
In the sRGB, the Brightness, Contrast, Saturation, Color
Temp., Skin Tone, Sharpness, and ASCR functions are not user-
configurable.
ASUS LCD Monitor VT229
4-2
2. Blue Light Filter
Adjust the energy level of blue light emitted from LED backlight.
ASUS VT229
Standard Mode VGA 1920x1080@60Hz
S
Blue Light Filter
Level 0
Level 1
Level 2
Level 3
Level 4
•
•
Level 0: No change.
Level 1~4: The higher the level,the more blue light will be
reduced.
•
•
•
When Blue Light Filter is activated,the default settings of Standard
Mode will be automatically imported.
Between Level 1 to Level 3, the Brightness function is user-
configurable.
Level 4 is optimized setting. It is compliance with TUV Low Blue
Light Certification. The Brightness function is not user-configurable.
Please refer to the following to alleviate eye strains:
•
Users should take some time away from the display if working for
long hours. It is advised to take short breaks (at least 5 mins) after
around 1 hour of continuous working at the computer. Taking short
and frequent breaks is more effective than a single longer break.
•
•
To minimize eye strain and dryness in your eyes, users should rest
the eye periodically by focusing on objects that are far away.
Eye exercises can help to reduces eye strain. Repeat these
exercises often. If eye strain continues please consult a physician.
Eye exercises: (1) Repeating look up and down (2) Slowly roll your
eyes (3) Move your eyes diagonal.
•
High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter to reduce 70% (max.)
harmful blue light to avoiding CVS (Computer Vision Syndrome).
ASUS LCD Monitor VT229
4-3
3. Color
Select the image color you like from this function.
ASUS VT229
Standard Mode VGA 1920x1080@60Hz
S
Color
Brightness
Contrast
Saturation
Color Temp.
Skin Tone
•
•
•
•
Brightness: The adjusting range is from 0 to 100.
Contrast: The adjusting range is from 0 to 100.
Saturation: The adjusting range is from 0 to 100.
Color Temp.: Contain three preset color modes (Cool, Normal,
Warm) and one User Mode.
•
Skin Tone: Contain three color modes including Reddish,
Natural, and Yellowish.
In the User Mode, colors of R (Red), G (Green), and B (Blue) are
userconfigurable; the adjusting range is from 0 ~ 100.
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel, ASCR, Position, Focus and Auto Adjust from this main
function.
ASUS VT229
Standard Mode VGA 1920x1080@60Hz
S
Image
Sharpness
Trace Free
Aspect Control
VividPixel
ASCR
Position
Focus
Auto Adjust
Chapter 4: General Instruction
4-4
•
Sharpness: Adjust the picture sharpness. The adjusting range
is from 0 to 100. (Only disable for selecting “Standard Mode” and
“sRGB Mode” in Splendid menu.)
•
•
•
Trace Free: Speeds up the response time by Over Drive
technology. The adjusting range is from lower 0 to faster 100.
Aspect Control: Adjust the aspect ratio to “Full”, “4:3”,
“OverScan”.
VividPixel: ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjusting range is from 0 to 100.
•
•
•
•
ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function. (ASCR: ASUS Smart Contrast Ratio. Disabled at
“Standard Mode”, “sRGB Mode” and “Reading Mode.)
Position: Adjust the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100. (Only available for VGA input.)
Focus: Reduce Horizonal-line noise and Vertical-line noise of
the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100. (Only available for VGA input.)
Auto Adjust: Automatically adjust the image to its optimized
position, clock, and phase. (Only available for VGA input.)
4:3 is only available when input source is in 4:3 format.
5. Input Select
Select the input source from VGA, HDMI.
ASUS VT229
Standard Mode VGA 1920x1080@60Hz
S
Input Select
VGA
HDMI
6. System Setup
Adjust the system configuration.
ASUS LCD Monitor VT229
4-5
ASUS VT229
Standard Mode VGA 1920x1080@60Hz
S
System Setup
Splendid Demo Mode
Volume
QuickFit
ECO Mode
OSD Setup
Language
Key Lock
More
ASUS VT229
Standard Mode VGA 1920x1080@60Hz
S
System Setup
Back
Information
Power Indicator
Power Key Lock
All Reset
•
Splendid Demo Mode: Activate the demo mode for the
Splendid function.
•
•
Volume: Adjust the output volume level.
QuickFit: Contains two patterns: (1) Grid (2) Photo size.
1. Grid patterns:The grid patterns facilitate designers and
users to organize content and layout on a page and
achieve a consistent look and feel.
Alignment Grid1
Alignment Grid2
Chapter 4: General Instruction
4-6
2. Photo size:The various real photo sizes displayed in the
QuickFit function provides photographers and other users
to accurately view and edit their photos in real size on the
screen.
2x2
4x6
3x5
•
•
ECO Mode: Activate the ecology mode for power saving.
OSD Setup: Adjusts the OSD Timeout, DDC/CI, and
Transparency of the OSD screen.
•
Language: Select OSD language. The selections are: English,
French, German, Spanish, Italian, Dutch, Russian, Poland,
Czech, Croatia, Hungary, Romania, Portugal, Turkey,
Simplified Chinese, Traditional Chinese, Japanese, Korean,
Persian, Thai and Indonesian.
•
Key Lock: Disable all key functions. Pressing the second button
on the right for more than five seconds to disable key lock
function.
•
•
•
•
•
•
More: Return the next page of System Setup.
Back: Return the previous page of System Setup.
Information:Displays the monitor information.
Power Indicator: Turn the power LED indicator on/off.
Power Key Lock: To disable / enable power key.
All Reset: Selects “Yes” to revert all settings to the factory
default mode.
ASUS LCD Monitor VT229
4-7
7. Shortcut
Selecting this option allows you to set one shortcut key.
ASUS VT229
Standard Mode VGA 1920x1080@60Hz
S
Shortcut
Shortcut 1
Shortcut 2
Blue Light Filter
Splendid
Brightness
Auto Adjust
Contrast
Color Temp.
Volume
•
•
Shortcut 1: User can select from “Blue Light Filter” “Splendid”,
“Brightness”, “Auto Adjust”, “Contrast”, “Color Temp.”, “Volume”,
and set as shortcut key. The default setting is Brightness.
Shortcut 2: User can select from “Blue Light Filter” “Splendid”,
“Brightness”, “Auto Adjust”, “Contrast”, “Color Temp.”, “Volume”,
and set as shortcut key. The default setting is Blue Light Filter.
Chapter 4: General Instruction
4-8
4.2
Specifications
Model
VT229H
21.5”W(54.61 cm)
1920 x 1080
Panel Size
Max. Resolution
Brightness (Typ.)
250cd/m2
Intrisinc Contrast Ratio
(Typ.)
1000:1
Viewing Angle (CR=10)
(Typ.)
≧178°(H) / ≧178°(V)
Display Colors
Response Time(Typ.)
DVI input
16.7 M (6bit+FRC)
5ms
No
HDMI input
Yes
Yes
D-Sub input
USB type-B port(only for
touch function)
Yes
Power ON Consumption
Note
18.56 W
base on EPA7.0
< 0.5 W
Power Saving Mode
Power OFF Mode
Tilt
< 0.5 W
-5° ~ +20°
VESA Wall Mounting
Phys. Dimension (WxHxD)
Box Dimension (WxHxD)
Net Weight (Esti.)
Gross Weight (Esti.)
Voltage Rating
Yes (100mm x 100mm)
491.5 x 367.7 x 204.4mm
558 x 425 x 137mm
3.7Kg
6.0Kg
AC 100~240V(Built-in)
*Specifications subject to change without notice.
ASUS LCD Monitor VT229
4-9
4.3
Troubleshooting (FAQ)
Problem
Possible Solution
button to check if the monitor is in the
Power LED is not ON
•
•
Press the
ON mode.
Check if the power cord is properly connected to the
monitor and the power outlet.
The power LED lights Amber and
there is no screen image
•
•
•
•
Check if the monitor and the computer are in the
ON mode.
Make sure the signal cable is properly connected
the monitor and the computer.
Inspect the signal cable and make sure none of the
pins are bent.
Connect the computer with another available
monitor to check if the computer is properly working.
Screen image is too light or dark
•
Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sized properly
•
•
Press the auto button to automatically adjust the
image.
Adjust the H-Position or V-Position settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
•
•
Make sure the signal cable is properly connected to
the monitor and the computer.
Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
•
Inspect the signal cable and make sure that none of
the pins are bent.
•
•
Perform Reset via OSD.
Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy
No sound or sound is low
•
Press the auto button to automatically adjust the
image (for VGA mode only).
Adjust the Phase and Clock settings via OSD.
•
•
Make sure the earphone cable is properly
connected to the monitor.
•
•
•
Adjust the volume settings of both your monitor and
computer.
Make sure the computer sound card driver is
properly installed and activated.
Make sure the audio source is correct on the OSD.
Chapter 4: General Instruction
4-10
4.4
Supported Timing List
PC Supported Primary Timing
Resolution
640x480
640x480
640x480
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1152x864
1280x960
1280x1024
Refresh Rate
Horizontal Frequency
31.469kHz
37.861kHz
37.5kHz
60Hz
72Hz
75Hz
56Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
35.156kHz
37.879kHz
48.077kHz
46.875kHz
48.363kHz
56.476kHz
60.023kHz
67.5kHz
60kHz
63.981kHz
1280x1024
1440x900
1440x900
1680x1050
1920x1080
75Hz
60Hz
75Hz
60Hz
60Hz
79.976kHz
55.935kHz
70.635kHz
65.29kHz
67.5kHz
IBM Modes, Factory Preset Timing
Resolution
Refresh Rate
Horizontal Frequency
640x350
720x400
70Hz
70Hz
31.469kHz
31.469kHz
MAC Modes, Factory Preset Timing
Resolution
Refresh Rate
Horizontal Frequency
640x480
832x624
67Hz
75Hz
35kHz
49.725kHz
VESA Modes, User Available Timing
Resolution
Refresh Rate
Horizontal Frequency
848x480
1280x720(RB)
1280x720
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
75Hz
60Hz
60Hz
31.02kHz
44.444kHz
44.772kHz
56.456kHz
47.396kHz
49.306kHz
49.702kHz
62.795kHz
47.712kHz
55.469kHz
70.635kHz
64.674kHz
66.587kHz
1280x720
1280x768(RB)
1280x800(RB)
1280x800
1280x800
1366x768
1440x900(RB)
1440x900
1680x1050(RB)
1920x1080
ASUS LCD Monitor VT229
4-11
SD/HD Timings (HDMI input only)
HDMI 1.3,CEA-861B Formats, SD/HD Supported Primary Timings of (HDMI input
only)
Resolution
Refresh Rate
Horizontal Frequency
640x480P
720x480P
720x576P
1280x720P
1280x720P
1920x1080i
1920x1080i
59.94 / 60Hz
59.94 / 60Hz
50Hz
50Hz
59.94 / 60Hz
50Hz
31.469 / 31.5kHz
31.469 / 31.5kHz
31.25kHz
37.5kHz
44.955 /45kHz
28.125kHz
59.94 / 60Hz
33.716 / 33.75kHz
HDMI 1.3,CEA-861B Formats, SD/HD Supported Optional Timings of (HDMI input
only)
Resolution
Refresh Rate
Horizontal Frequency
1440x480P
1440x576P
1920x1080P
1920x1080P
59.94 / 60Hz
50Hz
50Hz
59.94 / 60Hz
31.469 / 31.5kHz
31.25kHz
56.25kHz
67.433 / 67.5kHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
Chapter 4: General Instruction
4-12
|