ASUS VP247HAE User Manual

VP247 Series  
LCD Monitor  
User Guide  
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with manufacturer’s instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
As an Energy Star® Partner, our company has determined  
that this product meets the Energy Star® guidelines for energy  
efficiency.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
Made in China  
iii  
TCO Information  
Congratulations!  
This display is designed for both you and the planet!  
The display you have just purchased carries the TCO Certified  
label. This ensures that your display is designed, manufactured  
and tested according to some of the strictest quality and  
environmental requirements in the world. This makes for a high  
CERTIFIED  
performance product, designed with the user in focus that also  
minimizes the impact on the climate and our natural  
environment.  
TCO Certified is a third party verified program, where every product model is tested by  
an accredited impartial test laboratory. TCO Certified represents one of the toughest  
certifications for displays worldwide.  
Some of the Usability features of the TCO Certified for displays:  
Good visual ergonomics and image quality is tested to ensure top performance and  
reduce sight and strain problems. Important parameters are luminance, contrast,  
resolution, black level, gamma curve, color and luminance uniformity, color rendition and  
image stability.  
Product have been tested according to rigorous safety standards at an impartial  
laboratory.  
Electric and magnetic fields emissions as low as normal household background levels.  
Low acoustic noise emissions.  
Some of the Environmental features of the TCO Certified for displays:  
The brand owner demonstrates corporate social responsibility and has a certified  
environmental management system (EMAS or ISO 14001).  
Very low energy consumption both in on- and standby mode minimize climate impact.  
Restrictions on chlorinated and brominated flame retardants, plasticizers, plastics and  
heavy metals such as cadmium, mercury and lead (RoHS compliance).  
Both product and product packaging is prepared for recycling.  
The brand owner offers take-back options.  
The requirements can be downloaded from our web site. The requirements included in this  
label have been developed by TCO Development in co-operation with scientists, experts,  
users as well as manufacturers all over the world. Since the end of the 1980s TCO has been  
involved in influencing the development of IT equipment in a more user-friendly direction.  
Our labeling system started with displays in 1992 and is now requested by users and IT  
manufacturers all over the world. About 50% of all displays worldwide are TCO certified.  
For displays with glossy bezels the user should consider the placement of the display  
as the bezel may cause disturbing reflections from surrounding light and bright  
surfaces  
For more information, please visit  
(except for VP247HAE)  
iv  
Safety information  
Before setting up the monitor, carefully read all the documentation that  
came with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or  
moisture.  
Never try to open the monitor cabinet. The dangerous high voltages  
inside the monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a  
qualified service technician or your retailer.  
Before using the product, make sure all cables are correctly connected  
and the power cables are not damaged. If you detect any damage,  
contact your dealer immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or  
over a radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supply to  
your home, consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extension cords. Overloading can  
result in fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the  
monitor in any area where it may become wet. Place the monitor on a  
stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a  
long period of time. This will protect the monitor from damage due to  
power surges.  
Never push objects or spill liquid of any kind into the slots on the  
monitor cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked  
between 100 ~ 240V AC.  
The socket-outlet shall be installed near the equipment and shall be  
easily accessible  
If you encounter technical problems with the monitor, contact a  
qualified servic er.  
Provide an earthing connection before the mains plug is connected to  
the mains. And, when disconnecting the earthing connection, be sure  
to disconnect after pulling out the mains plug from the mains.  
v
WARNING  
Usage of other than specified head- or earphones can result in hearing  
loss due to excessive sound pressures.  
vi  
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the  
cables and power cord. Follow the correct lifting techniques when  
positioning the monitor. When lifting or carrying the monitor, grasp the  
edges of the monitor. Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the  
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains  
may be removed with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner  
intended for use with the LCD. Never spray cleaner directly on the  
screen, as it may drip inside the monitor and cause an electric shock.  
The following symptoms are normal with the monitor:  
The screen may flicker during the initial use due to the nature of the  
fluorescent light. Turn off the Power Switch and turn it on again to  
make sure that the flicker disappears.  
You may find slightly uneven brightness on the screen depending on  
the desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the  
previous screen may remain after switching the image. The screen will  
recover slowly or you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore,  
contact your dealer or service center to fix it. Do not repair the screen  
by yourself!  
Conventions used in this guide  
WARNING: Information to prevent injury to yourself when trying to  
complete a task.  
CAUTION: Information to prevent damage to the components  
when trying to complete a task.  
IMPORTANT: Information that you MUST follow to complete a  
task.  
NOTE: Tips and additional information to aid in completing a task.  
vii  
Where to find more information  
Refer to the following sources for additional information and for product  
and software updates.  
1. ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
2. Optional documentation  
Your product package may include optional documentation that may  
have been added by your dealer. These documents are not part of  
the standard package.  
viii  
1.1  
Welcome!  
Thank you for purchasing the ASUS® LCD monitor!  
The latest widescreen LCD monitor from ASUS provides a crisper,  
broader, and brighter display, plus a host of features that enhance your  
viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the monitor brings you!  
1.2  
Package contents  
Check your package for the following items:  
LCD Monitor  
Monitor Base  
Quick Start Guide  
Warranty Card  
1x Power Cord  
1x Audio Cable (option)  
1x HDMI Cable (option)  
1x VGA Cable  
1x DVI Cable (option)  
1x DisplayPort Cable (option)  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
ASUS LCD Monitor VP247 Series  
1-1  
1.3  
Assembling the monitor  
To assemble the monitor:  
1. Place the display flat on a cloth on the table, Then attach the base  
to the arm and fix with the screw to join them tightly. You can easily  
tighten the screw by fingers.  
2. Adjust the monitor to the angle that is most comfortable for you.  
-5 ~ 20  
1
2
1-2  
Chapter 1: Product Introduction  
1.4  
Connect cables  
1.4.1  
Rear of the LCD monitor  
6
HDMI  
DVI  
VGA  
VP247H  
VP247T  
VP247N  
1
1
2
3
4
5
5
DVI  
VGA  
4
3
DVI  
VGA  
4
1
1
3
VGA  
VP247D  
4
HDMI  
VGA  
VP247QG  
7
4
2
HDMI  
VGA  
VP247HAE  
4
2
ASUS LCD Monitor VP247 Series  
1-3  
1. AC-IN Port  
2. HDMI Port  
3. DVI Port  
4. VGA Port  
5. Audio - in Port  
6. Kensington Lock  
7. DisplayPort  
1-4  
Chapter 1: Product Introduction  
1.5  
Monitor introduction  
1.5.1  
Using the Controls button  
Use the control button on the back of the monitor to adjust the image  
settings.  
VP247H/VP247QG/VP247HAE  
1
4
5
2
3
6
7
8
VP247T/VP247N/VP247D  
Auto  
9
1. Power Indicator:  
The color definition of the power indicator is as the below table.  
Status  
White  
Amber  
OFF  
Description  
ON  
Standby mode  
OFF  
2.  
Power Button:  
Press this button to turn the monitor on/off.  
ASUS LCD Monitor VP247 Series  
1-5  
3.  
4.  
MENU Button:  
Press this button to enter the OSD menu.  
Close Button  
Exit the OSD menu.  
5.  
Input Select Button(VP247H/VP247QG/VP247HAE only):  
Use this hotkey to switch from VGA, DVI, HDMI input signal(VP247H).  
Use this hotkey to switch from VGA, HDMI, DisplayPort input  
signal(VP247QG).  
Use this hotkey to switch from VGA, HDMI input signal(VP247HAE).  
6.  
QuickFit Button:  
This is a hotkey to activate the QuickFit function designed for alignment.  
The QuickFit function contains 5 pages of common grid patterns, paper  
sizes, and photo sizes. See page 1-7 for details.  
7.  
8.  
Shortcut key1  
This is a Shortcut key. The default setting is Brightness.  
Shortcut key2  
This is a Shortcut key. The default setting is Blue Light Filter.  
9. Auto Button  
Auto Adjust.: Automatically adjust the image to its optimized position,  
clock, and phase.  
1-6  
Chapter 1: Product Introduction  
1.5.2  
QuickFit Function  
The QuickFit function contains three patterns: (1) Grid (2) Paper size (3)  
Photo size.  
1. Grid pattern: Facilitates designers and users to organize content and  
layout on one page and achieve a consistent look and feel.  
Alignment Grid 1  
Alignment Grid 2  
2. Paper size: Provides users to view their documents in real size on the  
screen.  
B5  
Letter  
B5  
Letter  
EXIT  
EXIT  
3. Photo size: Provides photographers and other users to accurately  
view and edit their photos in real size on the screen.  
2x2  
8x10  
4x6  
3x5  
5x7  
ASUS LCD Monitor VP247 Series  
1-7  
 
2.1  
Detaching the arm/stand (for VESA wall  
mount)  
The detachable stand of this monitor is specially designed for VESA wall  
mount.  
To detach the arm/stand  
1. Disconnect power and signal cables. Carefully put the front of the  
monitor face down on a clean table.  
2. Use your fingers to loosen the screw located at the bottom of the  
base,and remove the base from the stand.And then remove the hinge  
cover from monitor body by using your fingers.  
3. Use a screwdriver to remove the two screw on the arm (Figure 1),and  
then detach the arm/stand from the monitor.  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
Hold the stand of the monitor while removing the screws.  
2
1
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.  
Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg  
(Screw size: M4 x 10 mm).  
ASUS LCD Monitor VP247 Series  
2-1  
2.2  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable  
for you.  
Hold the stand to prevent the monitor from falling when you change its  
angle.  
You can adjust the monitor’s angle from +20˚ to -5˚  
-5 ~ 20  
It is normal that the monitor slightly shakes while you adjust the viewing  
angle.  
2-2  
Chapter 2: Setup  
3.1  
OSD (On-Screen Display) menu  
How to reconfigure  
Splendid  
3.1.1  
ASUS VP247  
Standard Mode VGA 1920x1080@60Hz  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Night View Mode  
sRGB Mode  
Reading Mode  
Darkroom Mode  
1. Press the MENU button to activate the OSD menu.  
2. Press the and buttons to toggle between options in the  
Menu. As you move from one icon to another, the option name is  
highlighted.  
3. To select the highlighted item on the menu press the  
4. Press the and buttons to select the desired parameter.  
5. Press the button to enter the slide bar and then use the or  
button.  
buttons, according to the indicators on the menu, to make your  
changes.  
6. Select the  
to return to previous menu or  
to accept and return to  
previous menu.  
ASUS LCD Monitor VP247 Series  
3-1  
3.1.2  
1. Splendid  
This function contains eight sub-functions that you can select for  
OSD Function Introduction  
your preference. Each mode has the Reset selection, allowing you to  
maintain your setting or return to the preset mode.  
ASUS VP247  
Standard Mode VGA 1920x1080@60Hz  
Splendid  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Night View Mode  
sRGB Mode  
Reading Mode  
Darkroom Mode  
Scenery Mode: This is the best choice for scenery photo displaying with  
SPLENDID™ Video Intelligence Technology.  
Standard Mode: This is the best choice for document editing with  
SPLENDID™ Video Intelligence Technology.  
Theater Mode: This is the best choice for movie watching with  
SPLENDID™ Video Intelligence Technology.  
Game Mode: This is the best choice for game playing with SPLENDID™  
Video Intelligence Technology.  
Night View Mode: This is the best choice for playing dark-scene game  
or watching dark-scene movie with SPLENDID™ Video Intelligence  
Technology.  
sRGB Mode: This is the best choice for viewing photos and graphics  
from PCs.  
Reading Mode : This is the best choice for book reading.  
Darkroom Mode : This is the best choice for a weak ambient light  
environmen.  
In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR  
functions are not user-configurable.  
In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness,  
Contrast and ASCR functions are not user-configurable.  
In the Reading Mode, the Saturation, SkinTone, Sharpness, ASCR, contrast,  
and Color Temp functions are not user-configurable.  
3-2  
Chapter 3: General Instruction  
2. Blue Light Filter  
Adjust the energy level of blue light emitted from LED backlight.  
ASUS VP247  
Standard Mode VGA 1920x1080@60Hz  
Blue Light Filter  
Level 0  
Level 1  
Level 2  
Level 3  
Level 4  
Level 0: No change.  
Level 1~4: The higher the level,the more blue light will be reduced.  
When Blue Light Filter is activated,the default settings of Standard Mode will  
be automatically imported.  
Between Level 1 to Level 3, the Brightness function is user-configurable.  
Level 4 is optimized setting. It is compliance with TUV Low Blue Light  
Certification. The Brightness function is not user-configurable.  
Please refer to the following to alleviate eye strains:  
Users should take some time away from the display if working for long hours.  
It is advised to take short breaks (at least 5 mins) after around 1 hour of  
continuous working at the computer. Taking short and frequent breaks is more  
effective than a single longer break.  
To minimize eye strain and dryness in your eyes, users should rest the eye  
periodically by focusing on objects that are far away.  
Eye exercises can help to reduces eye strain. Repeat these exercises often. If  
eye strain continues please consult a physician. Eye exercises: (1) Repeating  
look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.  
High energy blue light may lead to eye strain and AMD (Age-Related Macular  
Degeneration). Blue light filter to reduce 70% (max.) harmful blue light to  
avoiding CVS (Computer Vision Syndrome).  
ASUS LCD Monitor VP247 Series  
3-3  
3. Color  
Select the image color you like from this function.  
ASUS VP247  
Standard Mode VGA 1920x1080@60Hz  
Color  
Brightness  
Contrast  
Saturation  
Color Temp.  
Skin Tone  
Smart View  
Brightness: The adjusting range is from 0 to 100.  
Contrast: The adjusting range is from 0 to 100.  
Saturation: The adjusting range is from 0 to 100.  
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)  
and User Mode.  
Skin Tone: Contains three color modes including Reddish, Natural, and  
Yellowish.  
Smart View:The versatile viewing positions with Smart View Technology.  
(Only for VP247H/T/N/D/QG)  
In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-  
configurable; the adjusting range is from 0 ~ 100.  
3-4  
Chapter 3: General Instruction  
4. Image  
You can adjust the image Sharpness, Trace Free, Aspect Control,  
VividPixel, ASCR, Adaptive-Sync/Freesync (VP247QG only), Position  
(VGA only), Focus (VGA only), and Auto Adjust (VGA only), from this  
main function.  
ASUS VP247  
Standard Mode VGA 1920x1080@60Hz  
Image  
Sharpness  
Trace Free  
Aspect Control  
VividPixel  
ASCR  
Adaptive-Sync/Freesync  
Position  
Focus  
Auto Adjust  
Sharpness: Adjusts the picture sharpness. The adjusting range is from  
0 to 100.  
Trace Free: Speeds up the response time by Over Drive technology. The  
adjusting range is from lower 0 to faster 100.  
Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”, “Overscan(Only  
For HDMI)”.  
VividPixel: ASUS Exclusive Technology that brings lifelike visuals for  
crystal-clear and detail-oriented enjoyment. The adjusting range is from  
0 to 100.  
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio  
function.  
Adaptive-Sync/FreeSync: It can allow a Adaptive-Sync/FreeSync  
supported graphics source to dynamically adjust display refresh rate  
based on typical content frame rates for power efficient, virtually stutter  
free and low-latency display update.  
Position: Adjusts the horizontal position (H-Position) and the vertical  
position (V-Position) of the image. The adjusting range is from 0 to 100  
(Only available for VGA input).  
Focus: Reduces Horizonal-line noise and Vertical-line noise of the image  
by adjusting (Phase) and (Clock) separately. The adjusting range is from  
0 to 100 (Only available for VGA input).  
Auto Adjust.: Automatically adjust the image to its optimized position,  
clock, and phase. (Only available for VGA input.)  
ASUS LCD Monitor VP247 Series  
3-5  
4:3 is only available when input source is in 4:3 formatOverScan is only  
available for the HDMI input source  
Phase adjusts the phase of the pixel clock signal. With a wrong phase  
adjustment, the screen shows horizontal disturbances.  
Clock (pixel frequency) controls the number of pixels scanned by one  
horizontal sweep. If the frequency is not correct, the screen shows vertical  
stripes and the image is not proportional.  
5. Sound  
Adjust the sound settings to your preference (only for VP247QG).  
ASUS VP247  
Standard Mode VGA 1920x1080@60Hz  
Sound  
Volume  
Mute  
Source  
Volume: Adjusts the output volume level.  
Mute: Mute the output volume.  
Source: Adjusts audio source to “Line In” or “HDMI” (only available for  
HDMI input); Adjusts audio source to “Line In” or “DisplayPort” (only  
available for DisplayPort input).  
3-6  
Chapter 3: General Instruction  
6. Input Select  
Select the input source from VGA, DVI(VP247H/T/N), HDMI(Only For  
VP247H/QG/HAE), DisplayPort(Only for VP247QG) input signal.  
ASUS VP247  
Standard Mode VGA 1920x1080@60Hz  
Input Select  
VGA  
DVI  
HDMI  
DisplayPort  
7. System Setup  
Adjusts the system configuration.  
ASUS VP247  
Standard Mode VGA 1920x1080@60Hz  
System Setup  
Splendid Demo Mode  
Volume  
GamePlus  
DisplayPort Stream  
ECO Mode  
OSD Setup  
Language  
Key Lock  
More  
ASUS LCD Monitor VP247 Series  
3-7  
ASUS VP247  
Standard Mode VGA 1920x1080@60Hz  
System Setup  
Back  
Information  
Power Indicator  
Power Key Lock  
All Reset  
Splendid Demo Mode: Activate the demo mode for the Splendid  
function.  
Volume: Adjusts the output volume level.(Only for VP247H/T)  
GamePlus: The GamePlus Function provides a toolkit and creates a  
better gaming environment for users when playing different types of  
games. Particularly, Aimpoint function is specially designed for new  
gamers or beginners interested in First Person Shooter (FPS) games.  
To active GamePlus:  
Select ON to enter the GamePlus main menu.  
Press and to select between Crosshair and Timer, FPS  
Counter(Only for VP247QG) and Display Alignment(Only for  
VP247QG) function.  
Press  
to confirm the function you choose. Press  
to go back.  
Press to go off, and exit.  
3-8  
Chapter 3: General Instruction  
GamePlus main menu  
GamePlus-Crosshair  
GamePlus  
FPS  
Crosshair  
Timer  
FPS Counter  
Display Alignment  
(Practice Mode)  
GamePlus-Timer  
GamePlus-FPS Counter  
FPS  
Position  
DisplayPort Stream: Compatibility with graphic card. Select DP 1.1 or  
DP 1.2 by graphic card DP version. (Only for VP247QG)  
ECO Mode: Activate the ecology mode for power saving.  
OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of  
the OSD screen.  
Language: Select OSD language. The selections are: English, French,  
German, Spanish, Italian, Dutch, , Russian, Poland, Czech, Croacia,  
Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional  
Chinese, Japanese, Korean, Persian, Thai, Indonesian.  
Key Lock: Disable all key functions. Pressing the second button on the  
right for more than five seconds to disable key lock function.  
More: Return the next page of System Setting.  
Back: Return the previous page of System Setting.  
Information:Displays the monitor information.  
Power Indicator: Turn the power LED indicator on/off.  
Power Key Lock: To disable / enable power key  
All Reset: Selects “Yes” to revert all settings to the factory default mode.  
ASUS LCD Monitor VP247 Series  
3-9  
8. Shortcut  
Selecting this option allows you to set two shortcut keys.  
ASUS VP247  
Standard Mode VGA 1920x1080@60Hz  
Shortcut  
Shortcut 1  
Shortcut 2  
Blue Light Filter  
Brightness  
Splendid  
Auto Adjust  
Contrast  
Color Temp.  
Volume  
GamePlus  
Shortcut 1: User can select from “Blue Light Filter” “Splendid”,  
“Brightness”, “Auto Adjust(Only For VP247H/QG/HAE)”,  
“Contrast”, “Color Temp.”, “Volume(Only for VP247H/T/QG)”,  
“GamePlus”, and set as shortcut key. The default setting is  
Brightness.  
Shortcut 2: User can select from “Blue Light Filter” “Splendid”,  
“Brightness”, “Auto Adjust(Only For VP247H/QG/HAE)”, “Contrast”,  
“Color Temp.”, “Volume(Only for VP247H/T/QG)”, “GamePlus”, and  
set as shortcut key. The default setting is Blue Light Filter.  
3-10  
Chapter 3: General Instruction  
3.2  
Model  
Specifications  
VP247H  
VP247QG  
VP247T  
VP247N  
Panel Size  
23.6”W (59.94 cm)  
Max. Resolution  
Brightness (Typ.)  
1920x1080  
250cd/m2  
Intrinsic Contrast Ratio  
(Typ.)  
1000:1  
Viewing Angle (CR>10)  
Display Colors  
170°(V) /160°(H)  
16.7 M(6bit+FRC)  
1ms (G To G )  
Response Time  
Satellite Speaker  
Sound from HDMI  
HDMI input  
1.5W x 2 stereo  
Yes  
Yes  
No  
No  
No  
No  
DVI input  
Yes  
No  
No  
Yes  
D-Sub input  
Yes  
Yes  
Yes  
<16.8w  
DisplayPort  
No  
Audio Line-in  
Power ON Consumption  
Note  
*Based on Energy Star 7.0 standard  
Chassis Colors  
Power saving mode  
Power off mode  
Tilt  
Black  
< 0.5W  
< 0.5W  
-5° ~ +20°  
VESA Wall Mounting  
Yes (100mm x 100mm)  
Phys. Dimension with  
stand (WxHxD)  
561.1mm x 400.1mm x 199.4mm  
561.1mm x 335.8mm x 51.7mm  
Phys. Dimension without  
stand (WxHxD)  
(For VESA Wall Mount)  
Box Dimension (WxHxD)  
Net Weight (Esti.)  
Gross Weight (Esti.)  
Voltage Rating  
617 x 457 x 135 mm  
4 kg  
5.8 kg  
AC 100~240V(Built-in)  
ASUS LCD Monitor VP247 Series  
3-11  
VP247D  
23.6”W (59.94 cm)  
1920x1080  
VP247HAE  
23.6”W (59.94 cm)  
1920x1080  
Model  
Panel Size  
Max. Resolution  
Brightness (Typ.)  
250cd/m2  
250cd/m2  
Intrinsic Contrast Ratio  
(Typ.)  
1000:1  
3000:1  
Viewing Angle (CR>10)  
Display Colors  
170°(V) /160°(H)  
16.7 M(6bit+FRC)  
No  
178°(V) /178°(H)  
16.7 M(6bit+FRC)  
5ms (G To G )  
Response Time  
Satellite Speaker  
Sound from HDMI  
HDMI input  
No  
No  
No  
Yes  
Yes  
No  
No  
DVI input  
No  
D-Sub input  
Yes  
No  
Yes  
No  
DisplayPort  
Audio Line-in  
No  
No  
Power ON Consumption  
<16.8w  
<16.8w  
*Based on Energy Star 7.0  
standard  
*Based on Energy Star 7.0  
standard  
Note  
Chassis Colors  
Power saving mode  
Power off mode  
Tilt  
Black  
< 0.5W  
Black  
< 0.5W  
< 0.5W  
< 0.5W  
-5° ~ +20°  
-5° ~ +20°  
VESA Wall Mounting  
Yes (100mm x 100mm)  
Yes (100mm x 100mm)  
561.1mm x 400.1mm x  
199.4mm  
561.1mm x 400.1mm x  
199.4mm  
Phys. Dimension with  
stand (WxHxD)  
Phys. Dimension without  
stand (WxHxD)  
(For VESA Wall Mount)  
561.1mm x 335.8mm x  
51.7mm  
561.1mm x 335.8mm x  
51.7mm  
Box Dimension (WxHxD)  
Net Weight (Esti.)  
Gross Weight (Esti.)  
Voltage Rating  
617 x 457 x 135 mm  
4 kg  
617 x 457 x 135 mm  
4 kg  
5.8 kg  
5.8 kg  
AC 100~240V(Built-in)  
AC 100~240V(Built-in)  
3-12  
Chapter 3: General Instruction  
3.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
button to check if the monitor is in the  
Power LED is not ON  
Press the  
ON mode.  
Check if the power cord is properly connected to  
the monitor and the power outlet.  
Check Power Indicator function in main menu OSD.  
Select “ON” to turn on power LED.  
The power LED lights amber and  
there is no screen image  
Check if the monitor and the computer are in the  
ON mode.  
Make sure the signal cable is properly connected  
the monitor and the computer.  
Inspect the signal cable and make sure none of the  
pins are bent.  
Connect the computer with another available  
monitor to check if the computer is properly  
working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness settings via  
OSD.  
Screen image bounces or a wave  
pattern is present in the image  
Make sure the signal cable is properly connected to  
the monitor and the computer.  
Move electrical devices that may cause electrical  
interference.  
Screen image has color defects  
(white does not look white)  
Inspect the signal cable and make sure that none of  
the pins are bent.  
Perform Reset via OSD.  
Adjust the R/G/B color settings or select the Color  
Temperature via OSD.  
No sound or sound is low  
(VP247H/T/QG)’  
Make sure the audio cable is properly connected to  
the monitor.  
Adjust the volume settings of both your monitor and  
computer.  
Make sure the computer sound card driver is  
properly installed and activated.  
Make sure the audio source is correct on the OSD.  
ASUS LCD Monitor VP247 Series  
3-13  
3.4  
Supported Timing List  
PC Supported Primary Timing  
Resolution  
640x480  
640x480  
640x480  
800x600  
800x600  
800x600  
800x600  
1024x768  
1024x768  
1024x768  
1152x864  
1280x960  
1280x1024  
Refresh Rate  
Horizontal Frequency  
31.469kHz  
37.861kHz  
37.5kHz  
60Hz  
72Hz  
75Hz  
56Hz  
60Hz  
72Hz  
75Hz  
60Hz  
70Hz  
75Hz  
75Hz  
60Hz  
60Hz  
35.156kHz  
37.879kHz  
48.077kHz  
46.875kHz  
48.363kHz  
56.476kHz  
60.023kHz  
67.5kHz  
60kHz  
63.981kHz  
1280x1024  
1440x900  
1440x900  
1680x1050  
1920x1080  
75Hz  
60Hz  
75Hz  
60Hz  
60Hz  
75Hz  
79.976kHz  
55.935kHz  
70.635kHz  
65.29kHz  
67.5kHz  
1920x1080(for VP247QG)  
83.894kHz  
IBM Modes, Factory Preset Timing  
Resolution  
Refresh Rate  
Horizontal Frequency  
640x350  
720x400  
70Hz  
70Hz  
31.469kHz  
31.469kHz  
MAC Modes, Factory Preset Timing  
Resolution  
Refresh Rate  
Horizontal Frequency  
640x480  
832x624  
67Hz  
75Hz  
35kHz  
49.725kHz  
VESA Modes, User Available Timing  
Resolution  
Refresh Rate  
Horizontal Frequency  
848x480  
1280x720(RB)  
1280x720  
60Hz  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
31.02kHz  
44.444kHz  
44.772kHz  
56.456kHz  
47.396kHz  
49.306kHz  
49.702kHz  
62.795kHz  
47.712kHz  
55.469kHz  
70.635kHz  
64.674kHz  
66.587kHz  
1280x720  
1280x768(RB)  
1280x800(RB)  
1280x800  
1280x800  
1366x768  
1440x900(RB)  
1440x900  
1680x1050(RB)  
1920x1080  
3-14  
Chapter 3: General Instruction  
SD/HD Timings (HDMI input only)  
HDMI 1.3,CEA-861B Formats, SD/HD Supported Primary Timings of (HDMI input only)  
Resolution  
Refresh Rate  
Horizontal Frequency  
640x480P  
720x480P  
720x576P  
1280x720P  
1280x720P  
1920x1080i  
1920x1080i  
59.94 / 60Hz  
59.94 / 60Hz  
50Hz  
50Hz  
59.94 / 60Hz  
50Hz  
31.469 / 31.5kHz  
31.469 / 31.5kHz  
31.25kHz  
37.5kHz  
44.955 /45kHz  
28.125kHz  
59.94 / 60Hz  
33.716 / 33.75kHz  
HDMI 1.3,CEA-861B Formats, SD/HD Supported Optional Timings of (HDMI input only)  
Resolution  
Refresh Rate  
Horizontal Frequency  
1440x480P  
1440x576P  
1920x1080P  
1920x1080P  
59.94 / 60Hz  
50Hz  
50Hz  
59.94 / 60Hz  
31.469 / 31.5kHz  
31.25kHz  
56.25kHz  
67.433 / 67.5kHz  
* The modes not listed in the above tables may not be supported. For optimal resolution, we  
recommend that you choose a mode listed in the above tables.  
ASUS LCD Monitor VP247 Series  
3-15  

Vornado Aqs500 Air User Manual
Sanyo Inverter Split System 853e13 User Manual
Minolta Pageworks 18 User Manual
LG 43LH5700 UD User Manual
KENWOOD NX P1200NV User Manual
HP ELITEONE 705 G2 User Manual
DELL VOSTRO 360 User Manual
CRAFTSMAN 917.255920 User Manual
BLACK DECKER GT221 User Manual
ACER ASPIRE V7 581G User Manual