VivoMini VM65 Series
User Manual
Contents
About this manual ............................................................................................. 4
Conventions used in this manual ............................................................... 4
Typography......................................................................................................... 4
Package contents............................................................................................... 5
Getting to know your VivoMini
Features ................................................................................................................. 8
Front panel.......................................................................................................... 8
Left side ............................................................................................................... 9
Rear panel .........................................................................................................10
Using your VivoMini
Getting started..................................................................................................14
Connect the AC power adapter to your VivoMini...............................14
Connect a display panel to your VivoMini.............................................16
Connect the USB cable from keyboard or mouse ..............................17
Turn on your VivoMini...................................................................................18
Turning your VivoMini off..............................................................................19
Putting your VivoMini to sleep....................................................................19
Entering the BIOS Setup................................................................................19
Quickly enter the BIOS..................................................................................20
Memory upgrade
Upgrading memory modules......................................................................22
Appendix
Safety information...........................................................................................30
Setting up your system.................................................................................30
Care during use...............................................................................................31
Regulatory notices...........................................................................................32
ASUS contact information ............................................................................36
3
VivoMini VM65 Series
About this manual
This manual provides information about the hardware and software
features of your PC, organized through the following chapters:
Chapter 1: Getting to know your VivoMini
This chapter details the hardware components of your VivoMini.
Chapter 2: Using your VivoMini
This chapter provides you with information on using your
VivoMini.
Chapter 3: Memory upgrade
This chapter provides you with information on how to upgrade
the memory modules of your VivoMini.
Appendix
This section includes notices and safety statements your
VivoMini.
Conventions used in this manual
To highlight key information in this manual, some text are presented
as follows:
IMPORTANT! This message contains vital information that must be
followed to complete a task.
NOTE: This message contains additional information and tips that
can help complete tasks.
WARNING! This message contains important information that must
be followed to keep you safe while performing certain tasks and
prevent damage to your VivoMini's data and components.
Typography
Bold text
Indicates a menu or an item to select.
Italic
This indicates sections that you can refer
to in this manual.
4
VivoMini VM65 Series
Package contents
Your VivoMini package contains the following items:
AC power adapter*
VivoMini VM Series
Technical documentations
Power cable*
NOTES:
•
Actual product specifications and package contents may
vary with your VivoMini’s model type or with country or
region.
•
If the device or its components fail or malfunction during
normal and proper use within the warranty period, bring the
warranty card to the ASUS Service Center for replacement of
the defective components.
5
VivoMini VM65 Series
6
VivoMini VM65 Series
1
Getting to know your VivoMini
Features
Front panel
Top cover
The removable top cover allows you access to the hard disk
drive and the memory modules.
IMPORTANT! Before removing the top cover, turn off
your VivoMini and unplug the power cable.
Audio speakers
Your VivoMini uses SonicMaster technology to provide hi-fi
sound quality, with richer bass sounds, straight from the
built-in audio speakers.
Drive activity indicator
This indicator lights up when your VivoMini is accessing the
internal storage drive.
8
VivoMini VM65 Series
Left side
Air vents
The air vents on the left side allow cooler air to enter your
VivoMini chassis.
IMPORTANT! For optimum heat dissipation and air
ventilation, ensure that the air vents are free from
obstructions.
9
VivoMini VM65 Series
Rear panel
Power button
The power button allows you to turn the VivoMini on or
off. You can also press the power button once to put your
VivoMini to sleep mode.
Memory card slot
The built-in memory card reader enables your PC to read
and write data to and from MMC/SD/SDHC/SDXC cards.
Top cover lock latch + Kensington security slot
The top cover lock latch fastens the top cover on your
VivoMini.
The Kensington security slot allows you to secure your
VivoMini using Kensington® security products.
USB 3.0 ports
These Universal Serial Bus 3.0 (USB 3.0) ports provide a
transfer rate of up to 5 Gbit/s and are backward compatible
with USB 2.0.
10
VivoMini VM65 Series
DisplayPort port
Use this port to connect your ViVoMini to a DisplayPort or
VGA, DVI, or HDMI external display.
LAN port
The 8-pin RJ-45 LAN port supports a standard Ethernet
cable for connection to a local network.
Headphone/Audio Out jack
The stereo headphone jack is used to connect the system’s
audio out signal to amplified speakers or headphones.
Microphone jack
The microphone jack is designed to connect the
microphone used for video conferencing, voice narrations,
or simple audio recordings.
Digital audio out port (S/PDIF optical)
The Sony/Philips Digital Interface (S/PDIF) optical out port
allows you to transfer digital audio from your VivoMini into
an amplifier or your TV.
USB 3.0 ports
These Universal Serial Bus 3.0 (USB 3.0) ports provide a
transfer rate of up to 5 Gbit/s and are backward compatible
with USB 2.0.
USB 3.1 ports (on selected models)
The USB 3.1 (Universal Serial Bus 3.1) port provides a transfer
rate up to 10 Gbit/s and is backward compatible to USB 2.0.
NOTE: Transfer rate of this port may vary per model.
11
VivoMini VM65 Series
HDMI port
The HDMI (High Definition Multimedia Interface) port
supports a Full-HD device such as an LCD TV or monitor to
allow viewing on a larger external display.
Rear air vents
The air vents on the rear allow warm air to exit the
VivoMini.
IMPORTANT! For optimum heat dissipation and air
ventilation, keep the air vents at least 10cm away
from any obstructions.
Power input (DC 19V)
The supplied power adapter converts AC power to DC
power for use with this jack. Power supplied through this
jack supplies power to the PC. To prevent damage to the
PC, always use the bundled power adapter.
WARNING! The power adapter may become warm to
hot when in use. Do not cover the adapter and keep
it away from your body.
12
VivoMini VM65 Series
2
Using your VivoMini
Getting started
Connect the AC power adapter to your VivoMini
To connect the AC power adapter to your VivoMini:
A. Connect the AC power cord to the AC/DC adapter.
B. Plug the AC power cord into a 100V~240V power source.
C. Connect the DC power connector into your VivoMini’s power
(DC) input port.
NOTE: The power adapter may vary in appearance, depending on
models and your region.
14
VivoMini VM65 Series
IMPORTANT!
•
•
•
•
We strongly recommend that you use only the AC power
adapter and cable that came with your VivoMini.
We strongly recommend that you use a grounded wall
socket while using your VivoMini.
The socket outlet must be easily accessible and near your
VivoMini.
To disconnect your VivoMini from its main power supply,
unplug your VivoMini from the power socket.
NOTE:
Power adapter information:
•
•
•
Input voltage: 100-240Vac
Input frequency: 50-60Hz
Rating output current: 3.42A(65W) or 4.74A(90W) (varies per
model)
•
Rating output voltage: 19V
15
VivoMini VM65 Series
Connect a display panel to your VivoMini
You can connect a display panel or projector to your VivoMini that
has the following connectors:
•
•
HDMI connector
DisplayPort connector
•
VGA connector (use with a DisplayPort to VGA adapter or HDMI
to VGA adapter)
•
DVI connector (use with an HDMI to DVI adapter)
NOTE: The HDMI to DVI adapter, DisplayPort to VGA adapter, or HDMI
to VGA adapter are each sold separately.
To connect a display panel to your VivoMini:
Connect a display cable either to the HDMI or DisplayPort port.
Connecting display via HDMI port
Connecting display via DisplayPort port
16
VivoMini VM65 Series
Connect the USB cable from keyboard or mouse
You can connect generally any USB keyboard and mouse to your
VivoMini. You can also connect a USB dongle for a wireless keyboard
and mouse set.
To connect a keyboard and mouse to your VivoMini:
Connect the USB cable from your keyboard and mouse to any of the
USB 3.0 ports of your VivoMini.
Connecting keyboard or mouse via USB 3.0 port
17
VivoMini VM65 Series
Turn on your VivoMini
Press the power button to turn on your VivoMini.
18
VivoMini VM65 Series
Turning your VivoMini off
If your VivoMini is unresponsive, press and hold the power button
for at least four (4) seconds until your VivoMini turns off.
Putting your VivoMini to sleep
To put your VivoMini on Sleep mode, press the Power button once.
Entering the BIOS Setup
BIOS (Basic Input and Output System) stores system hardware
settings that are needed for system startup in the VivoMini.
In normal circumstances, the default BIOS settings apply to most
conditions to ensure optimal performance. Do not change the
default BIOS settings except in the following circumstances:
•
An error message appears on the screen during the system
bootup and requests you to run the BIOS Setup.
•
You have installed a new system component that requires further
BIOS settings or update.
WARNING! Inappropriate BIOS settings may result to instability
or boot failure. We strongly recommend that you change the BIOS
settings only with the help of a trained service personnel.
19
VivoMini VM65 Series
Quickly enter the BIOS
To quickly enter the BIOS:
•
Press the power button for at least four (4) seconds to shut down
your VivoMini, then press the power button again to turn your
VivoMini back on, then press <F2> or <Del> during POST.
•
When your PC is off, disconnect the power cord from your
VivoMini’s power connector. Reconnect the power cable and
press the power button to turn on your VivoMini. Press <F2> or
<Del> during POST.
NOTE: POST (Power-On Self Test) is a series of software controlled
diagnostic tests that run when you turn on your PC.
20
VivoMini VM65 Series
3
Memory upgrade
Upgrading memory modules
Your VivoMini comes with two SO-DIMM memory slots that allow
you to install two 2 GB, 4 GB, or 8GB unbuffered with non-ECC DDR4
204-pin SO-DIMMs for a maximum of 16 GB memory.
IMPORTANT! You can only install DDR4 SO-DIMM to the VivoMini’s
DIMM slots.
DIMMs.
To install or upgrade the memory modules:
1. Turn off your VivoMini.
2. Disconnect all cables and peripherals.
3. Place the VivoMini on a stable and flat surface.
22
VivoMini VM65 Series
4. Press down the latch at the rear panel to release the top cover.
5. Slide the top cover towards the rear of VivoMini until it is
detached from the chassis.
6. Remove the cover and set aside.
23
VivoMini VM65 Series
7. Carefully slide the HDD or the dualbay adapter (with SSD or 2.5-
inch HDD inside) from the SATA connector, then remove it from
the drive bay.
Removing the HDD from drive bay
Removing the dualbay adapter (with SSD or 2.5-inch HDD inside) from
drive bay
24
VivoMini VM65 Series
8. Prepare the memory module.
9. Release the screw that secures the SO-DIMM slot cover, then pry
the slot cover open.
Serial ATA connector
SO-DIMM slot cover
Serial ATA HDD drive bay
10. Align and insert the memory module into the slot (A) and press
it down (B), until it is securely seated in place.
25
VivoMini VM65 Series
11. Replace the SO-DIMM slot cover and secure it with the screw.
12. For HDD and dualbay adapter, match the rubber heads of the
screws with the four screw slots on the drive bay.
26
VivoMini VM65 Series
13. Carefully place the Serial ATA HDD or the dualbay adapter (with
SSD or 2.5-inch HDD inside) into the drive bay, then slide the
drive towards the SATA connector.
Re-installing the HDD to the drive bay
SATA connector
Rubber head screw slot
Rubber head screw slot
Rubber head screw slot
Re-installing the dualbay adapter (with SSD or 2.5-inch HDD inside) to the drive bay
SATA connector
27
VivoMini VM65 Series
14. Replace the top cover then slide it towards the front of VivoMini
to re-attach.
15. Lock the latch to securely fasten the top cover to the chassis.
28
VivoMini VM65 Series
Appendix
Safety information
Your VivoMini is designed and tested to meet the latest standards
of safety for information technology equipment. However, to
ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
•
Read and follow all instructions in the documentation before you
operate your system.
•
•
•
Do not use this product near water or a heated source.
Set up the system on a stable surface.
Openings on the chassis are for ventilation. Do not block or cover
these openings. Make sure you leave plenty of space around the
system for ventilation. Never insert objects of any kind into the
ventilation openings.
•
•
Use this product in environments with ambient temperatures
between 0˚C and 35˚C.
If you use an extension cord, make sure that the total ampere
rating of the devices plugged into the extension cord does not
exceed its ampere rating.
•
This equipment should be installed and operated with a
minimum distance of 20cm between the radiator and your body.
30
VivoMini VM65 Series
Care during use
•
•
•
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical
current still flows. Always unplug the power cord from the power
outlets before cleaning the system.
•
If you encounter the following technical problems with the
product, unplug the power cord and contact a qualified service
technician or your retailer.
–
–
–
The power cord or plug is damaged.
Liquid has been spilled into the system.
The system does not function properly even if you follow
the operating instructions.
–
–
The system was dropped or the cabinet is damaged.
The system performance changes.
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
NO DISASSEMBLY
The warranty does not apply to the products that
have been disassembled by users
DO NOT throw the VivoMini in municipal waste. This product has
been designed to enable proper reuse of parts and recycling. This
symbol of the crossed out wheeled bin indicates that the product
(electrical, electronic equipment, and mercury-containing button
cell battery) should not be placed in municipal waste. Check local
technical support services for product recycling.
31
VivoMini VM65 Series
Regulatory notices
REACH
Complying with the REACH (Registration, Evaluation, Authorization,
and Restriction of Chemicals) regulatory framework, we publish
the chemical substances in our products at ASUS REACH website at
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment
to the highest standards for protecting our environment. We believe
in providing solutions for you to be able to responsibly recycle our
products, batteries, other components, as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm
for the detailed recycling information in different regions.
COATING NOTICE
IMPORTANT! To provide electrical insulation and maintain electrical
safety, a coating is applied to insulate the device except on the areas
where the I/O ports are located.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with manufacturer’s instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
32
VivoMini VM65 Series
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
CAUTION! Any changes or modifications not expressly approved by
the grantee of this device could void the user’s authority to operate
the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure
compliance.
ISED Radiation Exposure Statement for Canada
This equipment complies with ISED radiation exposure limits set
forth for an uncontrolled environment. To maintain compliance with
ISED RF exposure compliance requirements, please avoid direct
contact to the transmitting antenna during transmitting. End users
must follow the specific operating instructions for satisfying RF
exposure compliance.
Operation is subject to the following two conditions:
•
•
This device may not cause interference and
This device must accept any interference, including interference
that may cause undesired operation of the device.
33
VivoMini VM65 Series
Compliance Statement of Innovation, Science and
Economic Development Canada (ISED)
This Class B digital apparatus complies with Canadian ICES-003, RSS-
210, and CAN ICES-3(B)/NMB-3(B).
This device complies with Industry Canada license exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Déclaration de conformité de Innovation, Sciences et
Développement économique Canada (ISED)
Cet appareil numérique de classe B est conforme aux normes
canadiennes ICES-003, RSS-210 et CAN ICES-3(B)/NMB-3(B).
Cet appareil est conforme aux normes CNR exemptes de licence
d’Industrie Canada. Le fonctionnement est soumis aux deux
conditions suivantes : (1) cet appareil ne doit pas provoquer
d’interférences et (2) cet appareil doit accepter toute interférence, y
compris celles susceptibles de provoquer un fonctionnement non
souhaité de l’appareil.
Wireless Operation Channel for Different Domains
N. America
Japan
2.412-2.462 GHz
2.412-2.484 GHz
2.412-2.472 GHz
Ch01 through CH11
Ch01 through Ch14
Ch01 through Ch13
Europe ETSI
Regional notice for Singapore
Complies with
IMDA Standards
DB103778
This ASUS product complies with IMDA Standards.
34
VivoMini VM65 Series
Regional notice for California
WARNING
Cancer and Reproductive Harm -
ENERGY STAR complied product
ENERGY STAR is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save money
and protect the environment through energy
efficient products and practices.
All ASUS products with the ENERGY STAR logo
comply with the ENERGY STAR standard, and the
power management feature is enabled by default. The monitor and
computer are automatically set to sleep after 10 and 30 minutes of
user inactivity. To wake your computer, click the mouse or press any
key on the keyboard.
detail information on power management and its benefits to the
detail information on the ENERGY STAR joint program.
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based
products.
35
VivoMini VM65 Series
ASUS contact information
ASUSTeK COMPUTER INC.
Address
Telephone
Fax
4F, No. 150, Li-Te Rd., Peitou, Taipei 112, Taiwan
+886-2-2894-3447
+886-2-2890-7798
Web site
Technical Support
Telephone
+86-21-3842-9911
+86-21-5866-8722, ext. 9101#
Fax
Online support
ASUS COMPUTER INTERNATIONAL (America)
Address
Telephone
Fax
800 Corporate Way, Fremont, CA 94539, USA
+1-510-739-3777
+1-510-608-4555
Web site
Technical Support
Support fax
General support
Online support
+1-812-284-0883
+1-812-282-2787
ASUS COMPUTER GmbH (Germany and Austria)
Address
Fax
Web site
Online contact
Harkort Str. 21-23, D-40880 Ratingen, Germany
+49-2102-959931
Technical Support
Telephone
+49-2102-5789555
Support Fax
+49-2102-959911
Online support
Manufacturer
ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112,
TAIWAN
Authorised
representative in
Europe
ASUSTeK Computer GmbH
Address: HARKORT STR. 21-23, 40880 RATINGEN,
GERMANY
36
VivoMini VM65 Series
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: Asus Computer International
Address: 800 Corporate Way, Fremont, CA 94539.
Phone/Fax No: (510)739-3777/(510)608-4555
hereby declares that the product
Product Name : VivoMini
Model Number : VM65N, VM65
Conforms to the following specifications:
FCC Part 15, Subpart B, Unintentional Radiators
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Representative Person’s Name :
Steve Chang / President
Signature :
Date :
Jan. 08, 2015
Ver. 140331
37
VivoMini VM65 Series
38
VivoMini VM65 Series
|