ASUS VG27BQ User Manual

VG27A/VG27B series  
LCD Monitor  
User Guide  
 
Contents  
iii  
Notices  
Federal.Communications.Commission.Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including interference that  
may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined  
by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
The use of shielded cables for connection of the monitor to the graphics card is  
required to assure compliance with FCC regulations. Changes or modifications  
to this unit not expressly approved by the party responsible for compliance  
could void the user’s authority to operate this equipment.  
Canadian.Department.of.Communications.Statement  
This digital apparatus does not exceed the Class B limits for radio noise emissions  
from digital apparatus set out in the Radio Interference Regulations of the  
Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
This Class B digital apparatus meets all requirements of the Canadian Interference  
- Causing Equipment Regulations.  
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement  
sur le matériel brouiller du Canada.  
iv  
 
Safety information  
Before setting up the monitor, carefully read all the documentation that came  
with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or moisture.  
Never try to open the monitor cabinet. The dangerous high voltages inside the  
monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a qualified  
service technician or your retailer.  
Before using the product, make sure all cables are correctly connected and the  
power cables are not damaged. If you detect any damage, contact your dealer  
immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or over a  
radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source indicated  
on the label. If you are not sure of the type of power supply to your home,  
consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power standard.  
Do not overload power strips and extention cords. Overloading can result in fire  
or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the monitor in  
any area where it may become wet. Place the monitor on a stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a long period  
of time. This will protect the monitor from damage due to power surges.  
Never push objects or spill liquid of any kind into the slots on the monitor  
cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked between  
100-240V AC.  
If you encounter technical problems with the monitor, contact a qualified  
service technician or your retailer.  
Adjustment of the volume control as well as the equalizer to other settings  
than the center position may increase the ear-/headphones output voltage and  
therefore the sound pressure level.  
The adapter is only used for this monitor, do not use it for other purpose.  
Your device uses one of the following power supplies:  
- Manufacturer: Delta Electronics Inc., Model: ADP-65GD B/ADP-65GD D.  
This symbol of the crossed out wheeled bin indicates that the product (electrical,  
electronic equipment, and mercury-containing button cell battery) should not  
be placed in municipal waste. Please check local regulations for disposal of  
electronic products.  
v
 
AEEE.yönetmeliğine.uygundur  
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the cables  
and power cord. Follow the correct lifting techniques when positioning the  
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.  
Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor  
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed  
with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended  
for use with the monitor. Never spray cleaner directly on the screen, as it may  
drip inside the monitor and cause an electric shock.  
The.following.symptoms.are.normal.with.the.monitor:  
The screen may flicker during the initial use due to the nature of the fluorescent  
light. Turn off the Power Switch and turn it on again to make sure that the  
flicker disappears.  
You may find slightly uneven brightness on the screen depending on the  
desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the previous  
screen may remain after switching the image. The screen will recover slowly or  
you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore, contact  
your dealer or service center to fix it. Do not repair the screen by yourself!  
Conventions.used.in.this.guide  
WARNING: Information to prevent injury to yourself when trying to  
complete a task.  
CAUTION: Information to prevent damage to the components when trying  
to complete a task.  
IMPORTANT: Information that you MUST follow to complete a task.  
NOTE: Tips and additional information to aid in completing a task.  
vi  
 
Where.to.find.more.information  
Refer to the following sources for additional information and for product and  
software updates.  
1.. ASUS.websites  
The ASUS websites worldwide provide updated information on ASUS  
2.. Optional.documentation  
Your product package may include optional documentation that may have  
been added by your dealer. These documents are not part of the standard  
package.  
Takeback Services  
ASUS recycling and takeback programs come from our commitment to the highest  
standards for protecting our environment. We believe in providing solutions for  
our customers to be able to responsibly recycle our products, batteries and other  
components as well as the packaging materials.  
information in different region.  
vii  
 
viii  
1.1  
Welcome!  
Thank you for purchasing the ASUS® LCD monitor!  
The latest widescreen LCD monitor from ASUS provides a broader, brighter and  
crystal-clear display, plus a host of features that enhance your viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the monitor brings to you!  
1.2  
Package contents  
Check your package for the following items:  
LCD monitor  
Monitor base  
Quick start guide  
Warranty card  
Power adapter  
Power cord  
DisplayPort cable (optional)  
HDMI cable (optional)  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
ASUS VG27 Series LCD Monitor  
1-1  
1.3 Monitor introduction  
1.3.1.  
Front.view  
1
2
3
4
5
1.  
2.  
(
5-way) button:  
• Turns on the OSD menu. Enacts the selected OSD menu item.  
• Increases/Decreases values or moves your selection up/down/left/right.  
• Displays the input selection bar when the monitor enters standby mode  
or displays the “NO SIGNAL“ message.  
button  
• Exits the OSD menu item.  
• Displays the input selection bar when the monitor enters standby mode  
or displays the “NO SIGNAL“ message.  
• Toggles the Key Lock function between on and off with a long press for 5  
seconds.  
3.  
4.  
button:  
• GamePlus hotkey. Move the  
(
) button up/down to select and  
press ) to confirm the function needed.  
(
• Displays the input selection bar when the monitor enters standby mode  
or displays the “NO SIGNAL“ message.  
button  
• GameVisual hotkey. This function contains 7 sub-functions you can  
select for your preference.  
• Displays the input selection bar when the monitor enters standby mode  
or displays the “NO SIGNAL“ message.  
1-2  
Chapter 1: Product introduction  
5.  
Power button/power indicator  
• Turns the monitor on/off.  
• The color definition of the power indicator is as the below table.  
Status  
Description  
White  
Amber  
OFF  
ON  
Standby mode/No signal  
OFF  
1.3.2.  
Back.view  
7
4
5
6
1.. HDMI.port. This port is for connection with an HDMI compatible device.  
2.. HDMI.port. This port is for connection with an HDMI compatible device.  
3.. DisplayPort.in. This port is for connection with a DisplayPort compatible  
device.  
4.. Earphone.jack. This port is only available when an HDMI/DisplayPort cable  
is connected.  
5.. DC-IN.port. This port connects the power cord.  
6.. Kensington.lock.slot.  
7.. Control.buttons.  
1.3.3.  
GamePlus.Function  
The GamePlus function provides a toolkit and creates a better gaming environment  
for users when playing different types of games. The crosshair overlay with 6  
different crosshair options lets you choose the one that best suits the game you're  
playing. There's also an onscreen timer you can position on the left of the display  
so you can keep track of the elapsed gaming time; while the FPS (frames per  
second) counter lets you know how smooth the game is running. Display Alignment  
displays alignment lines on 4 sides of the screen, serving as an easy and handy  
tool for you to line up multiple monitors perfectly. Sniper function (only available  
when HDR is disabled on your device) is customized for first-person shooters. You  
can select the magnification ratio and the type of alignment in sequence.  
ASUS VG27 Series LCD Monitor  
1-3  
To active GamePlus:  
1.  
Press the GamePlus hotkey.  
2.  
3.  
Move the  
Press the  
(
) button up/down to select among different functions.  
) button or move the ) button right to confirm the  
) button up/down to navigate  
) button left to go back, off, and exit.  
(
(
function you choose, and move the  
through the settings. Move the  
(
(
4.  
Highlight the desired setting and press the  
Press the button to inactivate it.  
(
) button to activate it.  
GamePlus Main Menu  
GamePlus — Crosshair  
GamePlus  
GamePlus  
Crosshair  
(Practice Mode)  
Timer  
FPS  
FPS Counter  
Display Alignment  
Sniper  
(Practice Mode)  
NEXT  
BACK/EXIT  
NEXT  
BACK/EXIT  
GamePlus — Timer  
GamePlus — Sniper  
GamePlus  
GamePlus  
  
  
  
  
  
1.5x  
1.7x  
2.0x  
NEXT  
BACK/EXIT  
NEXT  
BACK/EXIT  
1-4  
Chapter 1: Product introduction  
1.3.4.  
GameVisual.Function  
The GameVisual function helps you select among different picture modes in a  
convenient way.  
To active GameVisual:  
Press the GameVisual hotkey repeatedly to select.  
•. Scenery.Mode: This is the best choice for scenery photo displaying with  
GameVisualTM Video intelligence Technology.  
•. Racing.Mode: This is the best choice for racing game playing with  
GameVisualTM Video intelligence Technology.  
•. Cinema.Mode: This is the best choice for movie watching with  
GameVisualTM Video intelligence Technology.  
•. RTS/RPG.Mode: This is the best choice for Real-Time Strategy (RTS)/  
Role-Playing Game (RPG) playing with GameVisualTM Video intelligence  
Technology.  
•. FPS.Mode: This is the best choice for First Person Shooter game playing  
with GameVisualTM Video intelligence Technology.  
•. sRGB.Mode: This is the best choice for viewing photos and graphics  
from PCs.  
•. MOBA.Mode: This is the best choice for multiplayer online battle arena  
game playing with GameVisualTM Video intelligence Technology.  
In the Racing mode, the following function(s) are not user-configurable:  
Saturation, Skin Tone, Sharpness, ASCR.  
In the sRGB mode, the following function(s) are not user-configurable:  
Brightness, Contrast, Saturation, Color Temp., Skin Tone, Sharpness,  
ASCR.  
In the MOBA mode, the following function(s) are not user-configurable:  
Saturation, Skin Tone, Sharpness, ASCR.  
ASUS VG27 Series LCD Monitor  
1-5  
1-6  
Chapter 1: Product introduction  
2.1  
Assembling the monitor arm/base  
To assemble the monitor base:  
1.  
2.  
Have the front of the monitor face down on a table.  
Attach the base into the arm, making sure the tab on the arm fits into the groove  
on the base.  
3.  
Fix the base to the arm by fastening the bundled screw.  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
ASUS VG27 Series LCD Monitor  
2-1  
2.2  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable for you.  
Hold the stand to prevent the monitor from falling when you change its angle.  
The recommended adjusting angle is +33˚ to -5˚ (for tilt)/+90˚ to -90˚ (for  
swiveling/ +130 mm (for height adjustment)/90˚ (for portrait view).  
-5°~+33°  
130mm  
90°  
90°  
0°  
(Tilt)  
(Swivel)  
(Height adjustment)  
It is normal that the monitor slightly shakes while you adjust the viewing angle.  
Pivoting.the.monitor  
1.  
2.  
3.  
Lift the monitor to the highest position.  
Tilt the monitor to its maximum angle.  
Pivot the monitor to the angle you need.  
0°  
-5°~+33°  
-90°  
0°  
90°  
It is normal that the monitor slightly shakes while you adjust the viewing angle.  
2-2  
Chapter 2: Setup  
2.3  
Detaching the arm (for VESA wall  
mount)  
The detachable arm/base of this monitor is specially designed for VESA wall  
mount.  
To detach the arm/base:  
1.  
2.  
Have the front of the monitor face down on a table.  
Loosen the four screws on the back of the monitor and remove the arm/base.  
2
1
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
2.4  
Connecting the cables  
Connect the cables as the following instructions:  
•. To.connect.the.power.cord:  
a. Connect the power adapter securely to the monitor’s DC input.  
b. Connect one end of the power cord to the power adapter and the other  
end to a power outlet.  
ASUS VG27 Series LCD Monitor  
2-3  
•. To.connect.the.DisplayPort/HDMI.cable:  
a. Plug one end of the DisplayPort/HDMI cable to the monitor’s  
DisplayPort/HDMI port.  
b. Connect the other end of the DisplayPort/HDMI cable to your computer's  
DisplayPort/HDMI port.  
•. To.use.the.earphone: connect the end with plug type to the monitor’s  
earphone jack when an HDMI or DisplayPort signal is fed.  
2.5  
Turning on the monitor  
Press the power button  
. See page 1-2 for the location of the power button. The  
power indicator lights up in white to show that the monitor is ON.  
2-4  
Chapter 2: Setup  
3.1  
OSD (On-Screen Display) menu  
3.1.1.  
How.to.reconfigure  
ASUS TUF Gaming VG27B HDR Off  
Racing Mode DispalyPort 2560x1440@ 155Hz  
GameVisual  
Scenery Mode  
Racing Mode  
Cinema Mode  
RTS/RPG Mode  
FPS Mode  
sRGB Mode  
MOBA Mode  
1.  
2.  
Press the  
Move the  
(
) button to activate the OSD menu.  
(
) button up/down to navigate through the functions.  
Highlight the desired function and press the  
(
) button to activate it. If  
) button up/down  
the function selected has a sub-menu, move the  
(
again to navigate through the sub-menu functions. Highlight the desired sub-  
menu function and press the  
right to activate it.  
(
) button or move the  
(
) button  
3.  
4.  
Move the  
function.  
(
) button up/down to change the settings of the selected  
To exit and save the OSD menu, press the  
button or move the  
(
) left repeatedly until the OSD menu disappears. To adjust other  
functions, repeat steps 1-3.  
3.1.2.  
OSD.function.introduction  
1.. GameVisual  
ASUS TUF Gaming VG27B HDR Off  
Racing Mode DispalyPort 2560x1440@ 155Hz  
GameVisual  
Scenery Mode  
Racing Mode  
Cinema Mode  
RTS/RPG Mode  
FPS Mode  
sRGB Mode  
MOBA Mode  
Please refer to “1.3.4  
GameVisual Function”.  
ASUS VG27 Series LCD Monitor  
3-1  
2.. Blue.Light.Filter  
In this function, you can adjust the blue light filter level.  
ASUS TUF Gaming VG27B HDR Off  
Racing Mode DispalyPort 2560x1440@ 155Hz  
Blue Light Filter  
Level  
Level  
Level  
Level  
Level  
0
1
2
3
4
•.  
•.  
Level.0:.No change.  
Level.1~4: The higher the level, the less blue light is scattered.  
When Blue Light Filter is activated,the default settings of Racing Mode  
will be automatically imported. Between Level 1 to Level 3, the Brightness  
function is user-configurable. Level 4 is optimized setting. It is compliance  
with TUV Low Blue Light Certification. The Brightness function is not user-  
configurable.  
Please refer to the following to alleviate eye strains:  
Users should take some time away from the display if working for long  
hours. It is advised to take short breaks (at least 5 mins) after around 1  
hour of continuous working at the computer. Taking short and frequent  
breaks is more effective than a single longer break.  
To minimize eye strain and dryness in your eyes, users should rest the eye  
periodically by focusing on objects that are far away.  
Eye exercises can help to reduces eye strain. Repeat these exercises  
often. If eye strain continues please consult a physician. Eye exercises: (1)  
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes  
diagonal.  
High energy blue light may lead to eye strain and AMD (Age-Related  
Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue  
light to avoiding CVS (Computer Vision Syndrome).  
3-2  
Chapter 3: General Instructions  
3.. Color  
Set a desired color setting from this menu.  
ASUS TUF Gaming VG27B HDR Off  
Racing Mode DispalyPort 2560x1440@ 155Hz  
Color  
Brightness  
Contrast  
Saturation  
Color Temp.  
Skin Tone  
Smart View  
•.  
•.  
•.  
•.  
Brightness: The adjusting range is from 0 to 100.  
Contrast: The adjusting range is from 0 to 100.  
Saturation: the adjusting range is from 0 to 100.  
Color.Temp.: Contains 4 modes including Cool, Normal, Warm, and User  
Mode.  
•.  
•.  
Skin.Tone: Contains three color modes including Reddish, Natural, and  
Yellowish.  
Smart.View.(only.for.VG27B.series): Provides better display quality  
under big viewing angle.  
4.. Image.  
Set the image related setting from this menu.  
ASUS TUF Gaming VG27B HDR Off  
Racing Mode DispalyPort 2560x1440@ 155Hz  
Image  
HDR  
Over Clocking  
Sharpness  
VividPixel  
Adaptive-Sync  
ELMB SYNC  
Shadow Boost  
More  
•.  
•.  
HDR: Contains two HDR modes.  
*.  
ASUS.Gaming.HDR: Is the HDR mode that ASUS has specially  
adjusted for HDR performance.  
*.  
ASUS.Cinema.HDR: Complies with VESA Display HDR.  
Over.Clocking.(DisplayPort.only): Allows you to adjust the refresh rate.  
Select “ON“ if you want to enable this function.  
ASUS VG27 Series LCD Monitor  
3-3  
Over Clocking may cause screen flickering. To reduce such effects,  
disconnect the DisplayPort cable and use the monitor OSD menu to try  
again with a safer Max. Refresh rate.  
Sharpness: The adjusting range is from 0 to 100.  
Trace Free: Adjusts the response time of the monitor.  
Aspect Control: Adjusts the aspect ratio to full or 4:3.  
4:3 is only available when input source is in 4:3 format.  
VividPixel: Enhances the outline of the displayed picture and generates  
high-quality images on screen.  
ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.  
Adaptive-Sync (DisplayPort/HDMI only) Allows an Adaptive-Sync  
:
supported* graphics source to dynamically adjust display refresh rate  
based on typical content frame rates for power efficient, virtually stutter  
free and low-latency display update.  
* Adaptive-Sync can only be activated within 48Hz ~ 155Hz (DisplayPort  
only) and 48Hz ~ 144Hz (HDMI only).  
* For supported GPUs, minimum PC system and driver requirements,  
please contact the GPU manufactures.  
ELMB SYNC: Allows you to turn on the function when Adaptive-Sync is  
On. This function eliminates screen tearing, reduces ghosting and motion  
blur when playing games.  
When Adaptive-Sync is Off, this function can only be activated when the  
refresh rate is 100Hz, 120Hz, 144Hz or 155Hz.  
Shadow Boost: Dark color enhancement adjusts monitor gamma curve  
to enrich the dark tones in an image, making dark scenes and objects  
much easier to be seen.  
This function is only available in Racing mode, RTS/RPG mode, FPS  
mode or sRGB mode.  
3-4  
Chapter 3: General Instructions  
5.. Sound  
Set the sound related setting from this menu.  
ASUS TUF Gaming VG27B HDR Off  
Racing Mode DispalyPort 2560x1440@ 155Hz  
Sound  
Volume  
Mute  
•.  
•.  
Volume: The adjusting range is from 0 to 100.  
Mute: Toggles the monitor sound between on and off.  
6.. Input.Select.  
In this function, you can select your desired input source.  
ASUS TUF Gaming VG27B HDR Off  
Input Select  
Racing Mode DispalyPort 2560x1440@ 155Hz  
HDMI-1  
HDMI-2  
DisplayPort  
7.. System.Setup.  
Allows you to adjust the system.  
ASUS TUF Gaming VG27B HDR Off  
Racing Mode DispalyPort 2560x1440@ 155Hz  
System Setup  
GameVisual Demo Mode  
ECO Mode  
OSD Setup  
Language  
Key Lock  
Information  
Power Indicator  
More  
•.  
•.  
GameVisual.Demo.Mode: Activate the demo mode for the GameVisual  
function.  
ECO.Mode: reduces power consumption.  
ASUS VG27 Series LCD Monitor  
3-5  
•.  
OSD.Setup:  
*
*
*
Adjusts the OSD timeout from 10 to 120 seconds.  
Enables or disables the DDC/CI function.  
Adjusts the OSD background from opaque to transparent.  
•.  
•.  
Language: There are 21 languages for your selection, including English,  
French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,  
Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese,  
Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian.  
Key.Lock: To disable all function keys. Press  
over 5 seconds to  
cancel the key lock function.  
•.  
•.  
•.  
•.  
Information: Shows the monitor information.  
Power.Indicator: Turn the power LED indicator on/off.  
Power.Key.Lock: Enables or disables the power key.  
All.Reset: “Yes” allows you to restore the default settings.  
8.. MyFavorite  
Loads/Saves all settings on the monitor.  
ASUS TUF Gaming VG27B HDR Off  
MyFavorite  
Racing Mode DispalyPort 2560x1440@ 155Hz  
Setting  
Setting  
Setting  
1
2
3
3-6  
Chapter 3: General Instructions  
3.2  
Specifications summary  
Panel.Type  
Panel.size  
Max..Resolution  
TFT LCD  
27”W (16:9, 68.5 cm) wide screen  
2560 x 1440  
Pixel.pitch  
0.233 mm  
350 cd/m2  
1000:1  
Brightness.(Typ.)  
Contrast.Ratio.(Typ.)  
Viewing.angle(H/V).CR>10  
VG27AQ: 178˚/178˚  
VG27BQ: 170˚/160˚  
Display.colors  
Response.time  
16.7 M  
VG27AQ: 1ms MPRT  
VG27BQ: 1 ms (Gray to gray), 0.4 ms (Gray to  
gray, minimum)  
Color.temperature.selection  
Analog.input  
Digital.input  
4 color temperatures  
No  
HDMI x 2, DisplayPort v1.2 x 1  
Earphone.jack  
Audio.input  
Yes  
No  
Speaker.(Built-in)  
USB.3.0.port  
Colors  
2 W x 2 Stereo, RMS  
No  
Black  
Power.LED  
Tilt  
White (On)/Amber (Standby)  
+33˚~ -5˚  
Swivel  
+90˚~ -90˚  
Height.adjustment  
VESA.wall.mount  
Kensington.lock  
Voltage.rating  
130 mm  
100 x 100 mm  
Yes  
AC: 100~240V  
DC: 19 V, 3.42 A (AC adapter)  
Power.consumption  
Power On: < 65 W, Standby: < 0.5 W,  
Power Off: < 0.5 W  
Temperature.(Operating)  
0˚C~40˚C  
Temperature.(Non-operating)  
-20˚C~+60˚C  
Dimensions. (W. x. H. x. D). without. 619 mm x 363 mm x 50 mm  
stand  
Dimensions.(W.x.H.x.D).with.stand 620 mm x 507 mm x 211 mm (highest)  
620 mm x 378 mm x 211 mm (lowest)  
704 mm x 464 mm x 210 mm (package)  
Weight.(Esti.)  
5.8 kg (Net); 3.5 kg (without stand); 8.0 kg  
(Gross)  
ASUS VG27 Series LCD Monitor  
3-7  
Multi-languages  
21 languages (English, French, German,  
Italian, Spanish, Dutch, Portuguese, Russian,  
Czech, Croatian, Polish, Romanian, Hungarian,  
Turkish, Simplified Chinese, Traditional Chinese,  
Japanese, Korean, Thai, Indonesian, Persian)  
Accessories.  
DisplayPort cable (optional), HDMI cable  
(optional), power adapter, power cord, Quick start  
guide, warranty card  
Compliance.and.Standards  
UL/cUL, CB, CE, ErP, FCC, CCC, CU, RCM,  
BSMI, VCCI, RoHS, J-MOSS, WEEE, Windows  
7 & 8.1 & 10 WHQL, CEL, MEPS, PSE,  
UkrSEPRO, KCC, E-Standby, TUV-Flicker Free,  
TUV-Low Blue Light, ICES-3, PC Recycle  
*Specifications.are.subject.to.change.without.notice.  
3-8  
Chapter 3: General Instructions  
3.3  
Outline dimensions  
ASUS VG27 Series LCD Monitor  
3-9  
3.4  
Troubleshooting (FAQ)  
Problem  
Possible.Solution  
Power LED is not ON  
Press the  
is in the ON mode.  
Check if the power cord is properly  
connected to the monitor and the power  
outlet.  
button to check if the monitor  
The power LED lights amber and there is  
no screen image  
Check if the monitor and the computer are  
in the ON mode.  
Make sure the signal cable is properly  
connected the monitor and the computer.  
Inspect the signal cable and make sure  
none of the pins are bent.  
Connect the computer with another  
available monitor to check if the computer  
is properly working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness  
settings via OSD.  
Screen image bounces or a wave pattern is  
present in the image  
Make sure the signal cable is properly  
connected to the monitor and the  
computer.  
Move electrical devices that may cause  
electrical interference.  
Screen image has color defects (white does • Inspect the signal cable and make sure  
not look white)  
that none of the pins are bent.  
Perform All Reset via OSD.  
Adjust the R/G/B color settings or select  
the Color Temperature via OSD.  
3-10  
Chapter 3: General Instructions  
3.5  
Supported operating mode  
Timing.List  
HDMI.2.0  
DisplayPort.1.2  
640x480@60  
640x480@67  
640x480@72  
640x480@75  
720x400@70  
800x600@56  
800x600@60  
800x600@72  
800x600@75  
832x624@75  
1024x768@60  
1024x768@70  
1024x768@75  
1152x864@75  
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
X
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
X
X
V
V
V
V
V
1280x1024@60  
1280x1024@75  
1440x900@60  
1920x1080@60  
1920x1080@100  
1920x1080@120  
2560x1440@60  
2560x1440@100  
2560x1440@120  
2560x1440@144  
2560x1440@155  
Video.Timing  
Timing.List  
HDMI.2.0  
DisplayPort.1.2  
720x480P@60  
720x576P@50  
1280x720P@50  
1280x720P@60  
V
V
V
V
V
V
V
X
X
V
V
V
V
V
ASUS VG27 Series LCD Monitor  
3-11  
Video.Timing  
Timing.List  
HDMI.2.0  
DisplayPort.1.2  
1440x480P@60  
1440x576P@50  
1920x1080P@30  
1920x1080P@50  
1920x1080P@60  
1920x1080P@120  
V
V
V
V
V
V
V
V
X
V
V
X
X
X
V
V
V
V
Note:.Do.not.support.interlace.  
3-12  
Chapter 3: General Instructions  

Vornado Aqs 35 User Manual
Samsung Clx 6210fx User Manual
Samsung Awt20famba User Manual
Philips M2926a User Manual
HP DESIGNJET 4200 User Manual
HP DESIGNJET 2000CP User Manual
FUJITSU FI 800R 02 User Manual
CRAFTSMAN 247.370000 User Manual
BLACK DECKER NST2118 User Manual
ASUS U3000C User Manual