VG2791R Series
LCD Monitor
User Guide
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
•
Before setting up the monitor, carefully read all the documentation that came
with the package.
•
•
To prevent fire or shock hazard, never expose the monitor to ra n or moisture.
Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
•
•
If the power supply is broken, do not try to fix it by yourself Contact a qualifie
service technician or your retailer.
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
•
•
Use the appropriate power plug which complies with your local power standard.
Do not overload power strips and extention cords. Overloading can result in fir
or electric shock.
•
•
•
Avoid dust, humidity, and temperature extremes. Do not place the monitor in
any area where it may become wet. Place the monitor on a stable surface.
Unplug the unit during a lightning storm or if it will not be used for a long period
of time. This will protect the monitor from damage due to power surges.
Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
•
If you encounter technical problems with the monitor, contact a qualified
service technician or your retailer.
•
Adjustment of the volume control as well as the equalizer to other settings than
the center position may increase the ear-/headphones output voltage and
therefore the sound pressure level.
•
•
The adapter is only used for this monitor, do not use it for other purpose.
Please make sure to connect the adapter to main socket with protective
earthing. Your device uses one of the following power supplies:
- Manufacturer: Delta Electronics Inc., Model: ADP-40KD BB
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronic products.
iv
WARNING
Usage of other than specifie head- or earphones can result in hearing
loss due to excessive sound pressures.
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
v
Where to find more information
Refer to the following sources for additional information and for
product and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
information in different region.
vi
1.1
Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings you!
1.2
Package contents
Check your package for the following items:
LCD Monitor
Monitor Base
Quick Start Guide
Warranty Card
1x Power Cord
1x Power adapter
1x HDMI Cable (optional)
1x DisplayPort Cable (optional)
•
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LCD Monitor VG2791R Series
1-1
1.3
Assembling the monitor
To assemble the monitor:
1.
Place the display flat on a cloth on the table, Then attach the base
to the arm and fix with the screw to join them tightly. You can
easily tighten the screw by fingers.
2. Adjust the monitor to the angle that is most comfortable for you.
-5 ~ 22
1.4
Outline dimension
Unit: mm [inch]
Chapter 1: Product Introduction
1-2
1.5
Connect cables
1.5.1
Rear of the LCD monitor
1
2
1. DC-IN Port
2. Audio - out Port
3. HDMI 2 Port
4. HDMI 1 Port
5. DisplayPort Port
ASUS LCD Monitor VG2791R Series
1-3
1.6
Monitor introduction
1.6.1
Using the Controls button
Use the control button on the back of the monitor to adjust the image
settings.
Menu
Close
Power Off
GamePlus
GameVisual
1. Power Indicator:
•
The color definition of the power indicator is as the below table.
Status
White
Amber
OFF
Description
ON
Standby mode
OFF
2. Central button:
•
•
Press this button to enter the OSD menu.
Press this button to turn on the monitor when turned off.
3. Left key:
•
Exit the OSD menu or return to the previous layer.
4. Right key:
•
•
Power Off shortcut key.
Enter the option of the next layer.
Up key:
5.
6.
•
Use this hotkey to GamePlus.
•
Move the option upwards or increase the option value.
Down key:
•
Use this hotkey to GameVisual.
•
Move the option downwards or decrease the option value.
Key Lock shortcut key. Press and hold it for 5 seconds to enable/
disable Keys Lock.
•
1-4
Chapter 1: Product Introduction
GamePlus Function
•
•
Press GamePlus Button to enter the GamePlus main menu.
Activate Crosshair, Timer or FPS Counter or Display Alignment
function.
Press the and buttons to select and press
to confirm the
•
function needed. Press to go off, and exit.
GamePlus
Main Menu
GamePlus —
Crosshair
GamePlus
GamePlus
Crosshair
(Practice Mode)
Timer
FPS
FPS Counter
Display Alignment
GamePlus —
Timer
GamePlus —
FPS counter
GamePlus
GamePlus
FPS
ASUS LCD Monitor VG2791R Series
1-5
GameVisual Function
The GameVisual function helps you select among different picture modes in a
convenient way.
To active GameVisual:
Press the GameVisual hotkey repeatedly to select.
• Scenery Mode: This is the best choice for scenery photo displaying with
GameVisualTM Video intelligence Technology.
• Racing Mode: This is the best choice for racing game playing with
GameVisualTM Video intelligence Technology.
• Cinema Mode: This is the best choice for movie watching with
GameVisualTM Video intelligence Technology.
• RTS/RPG Mode: This is the best choice for Real-Time Strategy (RTS)/
Role-Playing Game (RPG) playing with GameVisualTM Video intelligence
Technology.
• FPS Mode: This is the best choice for First Person Shooter game playing
with GameVisualTM Video intelligence Technology.
• sRGB Mode: This is the best choice for viewing photos and graphics
from PCs.
• MOBA Mode: This is the best choice for multiplayer online battle arena
game playing with GameVisualTM Video intelligence Technology.
•
•
•
In the Racing mode, the following function(s) are not user-configurable:
Saturation, Skin Tone, ASCR.
In the sRGB mode, the following function(s) are not user-configurable:
Brightness, Contrast, Saturation, Color Temp., Skin Tone, ASCR.
In the MOBA mode, the following function(s) are not user-configurable:
Saturation, Skin Tone, ASCR.
1-6
Chapter 1: Product Introduction
2.1
Detaching the arm/stand (for wall
mount)（wall mount only for HDMI Port）
The detachable stand of this monitor is specially designed for wall
mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use a screwdriver to remove the two screws on the arm (Figure 1),
and then detach the arm/stand from the monitor (Figure 2).
•
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Hold the stand of the monitor while removing the screws.
Figure 1
Figure 2
•
•
The wall mount kit ( 75 x 75 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg
(Screw size: M4 x 10 mm).
ASUS LCD Monitor VG2791R Series
2-1
2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
•
•
Hold the stand to prevent the monitor from falling when you change its
angle.
You can adjust the monitor’s angle from +22˚ to -5˚ .
-5 ~ 22
It is normal that the monitor slightly shakes while you adjust the viewing
angle.
2-2
Chapter 2: Setup
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigur
ASUS TUF Gaming VG2791R
Gaming
Racing Mode DisplayPort 1920x1080@ 144Hz
OD(Tracefree)
GameVisual
GamePlus
Adaptive-Sync/FreeSync Premium
ELMB
Shadow Boost
1. Press the MENU button to activate the OSD menu.
2. Press the and buttons to toggle between options in the
Menu. As you move from one icon to another, the option name is
highlighted.
3. To select the highlighted item on the menu press the
button.
4. Press the and buttons to select the desired parameter.
Press the
button to enter the slide bar and then use the or
5.
6.
buttons, according to the indicators on the menu, to make your
changes.
Select the
previous menu.
to return to previous menu or
to accept and return to
ASUS LCD Monitor VG2791R Series
3-1
3.1.2
OSD Function Introduction
1. Gaming
ASUS TUF Gaming VG2791R
Gaming
Racing Mode DisplayPort 1920x1080@ 144Hz
OD(Tracefree)
GameVisual
GamePlus
Adaptive-Sync/FreeSync Premium
ELMB
Shadow Boost
•
OD(Tracefree): Improves the gray level response time of the LCD panel.
This function is not available when ELMB is enabled.
•
•
GameVisual: See 1.6.1 GameVisual.Function for details.
GamePlus: See 1.6.1 GamePlus.Function for details.
•
Adaptive-Sync/FreeSync Premium: Allows an FreeSync Premium
(Adaptive-Sync) supported graphics source to dynamically adjust
display refresh rate based on typical content frame rates for power
efficient, virtually stutter free and low-latency display update.
•
Adaptive-Sync/FreeSync Premium can only be activated within
48Hz~144Hz for DisplayPort.
•
FreeSync Premium can only be activated within 48Hz~144Hz for HDMI .
•
For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
•
ELMB : Allows you to turn on the function when
FreeSync Premium is Off. This function eliminates screen
tearing, reduces ghosting and motion blur when playing games.
When FreeSync Premium is Off, this function can only be activated
when the refresh rate is 100Hz, 120Hz, or 144Hz.
•
Shadow Boost: Dark color enhancement adjusts monitor gamma curve
to enrich the dark tones in an image, making dark scenes and objects
much easier to be seen.
This function is only available in Racing mode, RTS/RPG mode, FPS mode, or
sRGB mode.
3-2
Chapter 3: General Instruction
2.
Image
ASUS TUF Gaming VG2791R
Image
Racing Mode DisplayPort 1920x1080@ 144Hz
Brightness
Contrast
VividPixel
ASCR
Aspect Control
Blue Light Filter
•
•
Brightness: The adjusting range is from 0 to 100.
Contrast: The adjusting range is from 0 to 100.
•
VividPixel: Enhances the outline of the displayed picture and generates
high-quality images on screen.
•
•
•
ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
Aspect Control: Adjusts the aspect ratio to Full, or 4:3
Blue Light Filter
*
*
Level 0: No change.
Level 1~4: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Racing
Mode will be automatically imported. Between Level 1 to Level 3,
the Brightness function is user-configurable. Level 4 is optimized
setting. It is compliance with TUV Low Blue Light Certification.
The Brightness function is not user-configurable.
Please refer to the following to alleviate eye strains:
•
Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
•
To minimize eye strain and dryness in your eyes, users should rest the
eye periodically by focusing on objects that are far away.
•
Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
•
High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful
blue light to avoiding CVS (Computer Vision Syndrome).
ASUS LCD Monitor VG2791R Series
3-3
3.
Color
Set a desired color setting from this menu.
ASUS TUF Gaming VG2791R
Racing Mode DisplayPort 1920x1080@ 144Hz
Color
Color Temp.
Saturation
Skin Tone
•
Color Temp : Contains 4 modes including Cool, Normal, Warm, and
User Mode.
•
•
Saturation: the adjusting range is from 0 to 100.
Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
4. Input Select
In this function, you can select your desired input source.
ASUS TUF Gaming VG2791R
Racing Mode DisplayPort 1920x1080@ 144Hz
Input Select
HDMI-1
HDMI-2
DisplayPort
3-4
Chapter 3: General Instruction
5..
MyFavorite
ASUS TUF Gaming VG2791R
Racing Mode DisplayPort 1920x1080@ 144Hz
MyFavorite
Shortcut
Customized Setting
•.
Shortcut:
*.
Shortcut.1/Shortcut.2: Sets the shortcut functions for shortcut
buttons.
When a certain function is selected or activated, your shortcut button may not
support. Available function choices for shortcut: GamePlus (only for Shortcut.
1), GameVisual (only for Shortcut.2), Brightness, Contrast, Blue Light Filter,
Color Temp., Volume.
•.
Customized.Setting: Loads/Saves all settings on the monitor.
6..
System.Setup.
ASUS TUF Gaming VG2791R
System Setup
Racing Mode DisplayPort 1920x1080@ 144Hz
Language
Sound
ECO Mode
Power Indicator
Power Key Lock
Key Lock
OSD Setup
More
•.
Language: There are 21 languages for your selection, including English,
French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,
Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chin se,
Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian.
•.
Sound: Sets the sound related settings from this menu.
*.
Volume: The adjusting range is from 0 to 100.
*.
Mute: Toggles the monitor sound between on and off.
•.
ECO.Mode: reduces power consumption.
•.
Power.Indicator: Turn the power LED indicator on/off.
ASUS LCD Monitor VG2791R Series
3-5
•.
Power.Key.Lock: Enables or disables the power key.
Key.Lock: To disable all function keys. Press
over 5 seconds to
•.
cancel the key lock function.
•.
OSD.Setup:
*
*
*
Adjusts the OSD timeout from 10 to 120 seconds.
Enables or disables the DDC/CI function.
Adjusts the OSD background from opaque to transparent.
•.
Information: Shows the monitor information.
•.
All.Reset: “Yes” allows you to restore the default settings.
3-6
Chapter 3: General Instruction
3.2
Model
Specification
VG279Q1R
Panel Size
27’’W(68.6cm)
1920x1080@144Hz
250cd/m2
Max. Resolution
Brightness (Typ.)
Intrinsic Contrast Ratio
(Typ.)
1000:1
Viewing Angle (CR>10)
Display Colors
178°(H) /178°(V)
16.7 M
Response Time
HDMI unput 1
4ms (G To G ) 1ms(MPRT)
Yes
Yes
Yes
HDMI input 2
DisplayPort
Audio Line-out
Yes
<18w
(Mesauring a screen brightness of 200 nits Without audio
/ USB / Card reader connection)
Power ON Consumption
Chassis Colors
Power saving mode
Power off mode
Tilt
Black
< 0.5W
< 0.3W
-5° ~ +22°
Wall Mounting
Yes (75mm x 75mm)
Phys. Dimension with
stand (WxHxD)
612.6mm x 431mm x 213mm
Phys. Dimension without
stand (WxHxD)
612.6mm x 362.5mm x 37.7mm
(For VESA Wall Mount)
Box Dimension (WxHxD)
Net Weight (Esti.)
692mm x 499mm x 183mm
3.6kg
Gross Weight (Esti.)
Voltage Rating
6.1 kg
AC: 100-240V DC: 19V, 2.1A (AC adapter)
0℃~40℃
Temperature(operation)
ASUS LCD Monitor VG2791R Series
3-7
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
button to check if the monitor is in the
Power LED is not ON
•
•
•
Press the
ON mode.
Check if the power cord is properly connected to
the monitor and the power outlet.
Check Power Indicator function in main menu OSD.
Select “ON” to turn on power LED.
The power LED lights amber and
there is no screen image
•
•
•
•
Check if the monitor and the computer are in the
ON mode.
Make sure the signal cable is properly connected
the monitor and the computer.
Inspect the signal cable and make sure none of the
pins are bent.
Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark
•
Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
•
•
Make sure the signal cable is properly connected to
the monitor and the computer.
Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
•
Inspect the signal cable and make sure that none of
the pins are bent.
•
•
Perform Reset via OSD.
Adjust the R/G/B color settings or select the Color
Temperature via OSD.
No sound or sound is low
•
•
•
•
Make sure the audio cable is properly connected to
the monitor.
Adjust the volume settings of both your monitor and
computer.
Make sure the computer sound card driver is
properly installed and activated.
Make sure the audio source is correct on the OSD.
3-8
Chapter 3: General Instruction
3.4
Supported Timing List
PC Supported Primary Timing
Resolution
640x480
640x480
640x480
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1152x864
1280x960
1280x1024
Refresh Rate
Horizontal Frequency
31.469kHz
37.861kHz
37.5kHz
60Hz
72Hz
75Hz
56Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
35.156kHz
37.879kHz
48.077kHz
46.875kHz
48.363kHz
56.476kHz
60.023kHz
67.5kHz
60kHz
63.981kHz
1280x1024
1440x900
1440x900
1680x1050
1920x1080
1280x720
1920x1080
1920x1080
1920x1080
75Hz
60Hz
75Hz
60Hz
60Hz
60Hz
100Hz
120Hz
144Hz
79.976kHz
55.935kHz
70.635kHz
65.29kHz
67.5kHz
44.772kHz
137.3kHz
139.1kHz
158.1kHz
IBM Modes, Factory Preset Timing
Resolution
Refresh Rate
Horizontal Frequency
640x350
720x400
70Hz
70Hz
31.469kHz
31.469kHz
MAC Modes, Factory Preset Timing
Resolution
Refresh Rate
Horizontal Frequency
640x480
832x624
67Hz
75Hz
35kHz
49.725kHz
VESA Modes, User Available Timing
Resolution
Refresh Rate
Horizontal Frequency
848x480
1280x720(RB)
1280x720
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
75Hz
60Hz
31.02kHz
44.444kHz
44.772kHz
56.456kHz
47.396kHz
49.306kHz
49.702kHz
62.795kHz
47.712kHz
1280x720
1280x768(RB)
1280x800(RB)
1280x800
1280x800
1366x768
ASUS LCD Monitor VG2791R Series
3-9
1440x900(RB)
1440x900
1680x1050(RB)
1920x1080
60Hz
75Hz
60Hz
60Hz
55.469kHz
70.635kHz
64.674kHz
66.587kHz
SD/HD Timings
HDMI/DP,CEA-861B Formats, SD/HD Supported Primary Timings of
Resolution
Refresh Rate
Horizontal Frequency
640 x 480 P 4:3
720 x 480 P 4:3
720 x 480 P 16:9
720 x 576 P 4:3
59.94/60Hz
59.94/60Hz
59.94/60Hz
50Hz
31.469kHz
31.469/31.5kHz
31.469 / 31.5kHz
31.25kHz
720 x 576 P 16:9
1280 x 720 P 16:9
1280 x 720 P 16:9
1440 x 480 P 4:3
1440 x 480 P 16:9
1440 x 576 P 4:3
1440 x 576 P 16:9
1920 x 1080 P 16:9
1920 x 1080 P 16:9
50Hz
50Hz
59.94/60Hz
59.94/60Hz
59.94/60Hz
50Hz
50Hz
50Hz
59.94/60Hz
31.25kHz
37.5kHz
44.955/45kHz
31.469/ 31.5kHz
31.469/ 31.5kHz
31.25kHz
31.25kHz
56.25kHz
67.433/67.5kHz
HDMI/DP,CEA-861B Formats, SD/HD Supported Optional Timings of
Resolution
Refresh Rate
Horizontal Frequency
1440x480P
1440x576P
1920x1080P
1920x1080P
59.94 / 60Hz
50Hz
50Hz
59.94 / 60Hz
31.469 / 31.5kHz
31.25kHz
56.25kHz
67.433 / 67.5kHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
3-10
Chapter 3: General Instruction
|