ACER ASPIRE V7 582P User Manual

Aspire V7-581P / V7-582P / V5-  
573P / V5-572P / V5-552P  
User’s Manual  
TABLE OF CONTENTS  
Returning your system to its factory  
Basic care and tips for using your  
Recovering your system................................... 42  
Table of contents - 3  
Three concepts you might want to  
I want to use Windows in the way  
desktop back!........................................... 96  
How do I add a favorite to Internet  
How do I check for Windows  
4 - Table of contents  
SAFETY AND COMFORT  
SAFETY INSTRUCTIONS  
Read these instructions carefully. Keep this document for future reference. Follow all  
warnings and instructions marked on the product.  
Turning the product off before cleaning  
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or  
aerosol cleaners. Use a damp cloth for cleaning.  
WARNINGS  
Accessing the power cord  
Be sure that the power outlet you plug the power cord into is easily accessible and located  
as close to the equipment operator as possible. When you need to disconnect power to  
the equipment, be sure to unplug the power cord from the electrical outlet.  
Disconnecting the power source  
Observe the following guidelines when connecting and disconnecting power to the power  
supply unit:  
Install the power supply unit before connecting the power cord to the AC power outlet.  
Unplug the power cord before removing the power supply unit from the computer.  
If the system has multiple sources of power, disconnect power from the system by  
unplugging all power cords from the power supplies.  
Using electrical power  
- This product should be operated from the type of power indicated on the marking  
label. If you are not sure of the type of power available, consult your dealer or local  
power company.  
- Do not allow anything to rest on the power cord. Do not locate this product where  
people will walk on the cord.  
Safety and comfort - 5  
 
- If an extension cord is used with this product, make sure that the total ampere rating  
of the equipment plugged into the extension cord does not exceed the extension cord  
ampere rating. Also, make sure that the total rating of all products plugged into the  
wall outlet does not exceed the fuse rating.  
- Do not overload a power outlet, strip or receptacle by plugging in too many devices.  
The overall system load must not exceed 80% of the branch circuit rating. If power  
strips are used, the load should not exceed 80% of the power strip's input rating.  
- This product's AC adapter is equipped with a three-wire grounded plug. The plug only  
fits in a grounded power outlet. Make sure the power outlet is properly grounded  
before inserting the AC adapter plug. Do not insert the plug into a non-grounded  
power outlet. Contact your electrician for details.  
- Warning! The grounding pin is a safety feature. Using a power outlet that is not  
properly grounded may result in electric shock and/or injury.  
- Note: The grounding pin also provides good protection from unexpected noise  
produced by other nearby electrical devices that may interfere with the performance  
of this product.  
- The system can be powered using a wide range of voltages; 100 to 120 or 220 to 240  
V AC. The power cord included with the system meets the requirements for use in  
the country/region where the system was purchased. Power cords for use in other  
countries/regions must meet the requirements for that country/region. For more  
information on power cord requirements, contact an authorized reseller or service  
provider.  
Protecting your hearing  
- Warning! Permanent hearing loss may occur if earphones or  
headphones are used at high volume for prolonged periods of time.  
To protect your hearing, follow these instructions.  
- Increase the volume gradually until you can hear clearly and comfortably.  
- Do not increase the volume level after your ears have adjusted.  
- Do not listen to music at high volumes for extended periods.  
6 - Safety and comfort  
- Do not increase the volume to block out noisy surroundings.  
- Decrease the volume if you can't hear people speaking near you.  
Bundled dummy cards  
- Note: Information in this section may not apply to your computer.  
Your computer shipped with plastic dummies installed in the card slots. Dummies protect  
unused slots from dust, metal objects or other particles. Save the dummies for use when  
no cards are in the slots.  
General  
- Do not use this product near water.  
- Do not place this product on an unstable cart, stand or table. If the product falls, it  
could be seriously damaged.  
- Slots and openings are provided for ventilation to ensure reliable operation of the  
product and to protect it from overheating. These openings must not be blocked or  
covered. The openings should never be blocked by placing the product on a bed, sofa,  
rug or other similar surface. This product should never be placed near or over a radiator  
or heat register, or in a built-in installation unless proper ventilation is provided.  
- Never push objects of any kind into this product through cabinet slots as they may  
touch dangerous voltage points or short-out parts that could result in a fire or electric  
shock. Never spill liquid of any kind onto or into the product.  
- To avoid damage of internal components and to prevent battery leakage, do not  
place the product on a vibrating surface.  
- Never use it under sporting, exercising, or any vibrating environment which will  
probably cause unexpected short current or damage rotor devices, HDD, Optical  
drive, and even exposure risk from lithium battery pack.  
- The bottom surface, areas around ventilation openings and AC adapter may get hot.  
To avoid injury, ensure they do not come in contact with your skin or body.  
- Your device and its enhancements may contain small parts. Keep them out of the  
reach of small children.  
Safety and comfort - 7  
Product servicing  
Do not attempt to service this product yourself, as opening or removing covers may  
expose you to dangerous voltage points or other risks. Refer all servicing to qualified  
service personnel.  
Unplug this product from the wall outlet and refer servicing to qualified service personnel  
when:  
- The power cord or plug is damaged, cut or frayed.  
- Liquid was spilled into the product.  
- The product was exposed to rain or water.  
- The product has been dropped or the case has been damaged.  
- The product exhibits a distinct change in performance, indicating a need for service.  
- The product does not operate normally after following the operating instructions.  
- Note: Adjust only those controls that are covered by the operating instructions, since  
improper adjustment of other controls may result in damage and will often require  
extensive work by a qualified technician to restore the product to normal condition.  
Guidelines for safe battery usage  
This computer uses a Lithium-ion or Lithium-polymer battery. Do not use it in a humid, wet  
or corrosive environment. Do not put, store or leave your product in or near a heat source,  
in a high temperature location, in strong direct sunlight, in a microwave oven or in a  
pressurized container, and do not expose it to temperatures over 60° C (140° F). Failure  
to follow these guidelines may cause the battery to leak acid, become hot, explode or  
ignite and cause injury and/or damage.  
Do not pierce, open or disassemble the battery. If the battery leaks and you come into  
contact with the leaked fluids, rinse thoroughly with water and seek medical attention  
immediately.  
For safety reasons, and to prolong the lifetime of the battery, charging will not occur at  
temperatures below 0° C (32° F) or above 40° C (104° F).  
8 - Safety and comfort  
The full performance of a new battery is achieved only after two or three complete charge  
and discharge cycles. The battery can be charged and discharged hundreds of times, but  
it will eventually wear out. When the operation time becomes noticeably shorter than  
normal, refer to qualified service personnel. Use only the approved batteries, and  
recharge your battery only with the approved chargers designated for this device.  
Never use any charger or battery that is damaged.  
The capacity and lifetime of the battery will be reduced if the battery is left in hot or cold  
places, such as in a closed car in summer or winter. Always try to keep the battery  
between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work  
temporarily, even when the battery is fully charged. Battery performance is especially  
limited in temperatures well below freezing.  
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if  
damaged. Dispose of batteries according to local regulations. Please recycle when  
possible. Do not dispose as household waste.  
- Note: Please refer to www.acer.com for battery shipping documents.  
- Warning! Batteries may explode if not handled properly. Do not disassemble or  
dispose of them in fire. Keep them away from children. Follow local regulations  
when disposing of used batteries.  
RADIO FREQUENCY INTERFERENCE  
- Warning! For safety reasons, turn off all wireless or radio transmitting devices  
when using your laptop under the following conditions. These devices may  
include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or 3G.  
Remember to follow any special regulations in force in any area, and always switch off  
your device when its use is prohibited or when it may cause interference or danger. Use  
the device only in its normal operating positions. This device meets RF exposure  
guidelines when used normally, and it and its antenna are positioned at least 1.5  
centimeters (5/8 inch) away from your body. It should not contain metal and you should  
position the device the above-stated distance from your body. To successfully transmit  
data files or messages, this device requires a good quality connection to the network. In  
Safety and comfort - 9  
some cases, transmission of data files or messages may be delayed until such a  
connection is available. Ensure that the above separation distance instructions are  
followed until the transmission is completed. Parts of the device are magnetic. Metallic  
materials may be attracted to the device, and persons with hearing aids should not hold  
the device to the ear with the hearing aid. Do not place credit cards or other magnetic  
storage media near the device, because information stored on them may be erased.  
MEDICAL DEVICES  
Operation of any radio transmitting equipment, including wireless phones, may interfere  
with the functionality of inadequately protected medical devices. Consult a physician or  
the manufacturer of the medical device to determine if they are adequately shielded from  
external RF energy or if you have any questions. Switch off your device in health care  
facilities when any regulations posted in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that could be sensitive to external RF  
transmissions.  
Pacemakers. Pacemaker manufacturers recommend that a minimum separation of 15.3  
centimeters (6 inches) be maintained between wireless devices and a pacemaker to avoid  
potential interference with the pacemaker. These recommendations are consistent with  
the independent research by and recommendations of Wireless Technology Research.  
Persons with pacemakers should do the following:  
- Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker  
- Not carry the device near your pacemaker when the device is switched on.  
If you suspect interference, switch off your device, and move it.  
Hearing aids. Some digital wireless devices may interfere with some hearing aids. If  
interference occurs, consult your service provider.  
VEHICLES  
RF signals may affect improperly installed or inadequately shielded electronic systems in  
motor vehicles such as electronic fuel injection systems, electronic anti-skid (anti-lock)  
braking systems, electronic speed control systems, and air bag systems. For more  
information, check with the manufacturer, or its representative, of your vehicle or any  
10 - Safety and comfort  
equipment that has been added. Only qualified personnel should service the device, or  
install the device in a vehicle. Faulty installation or service may be dangerous and may  
invalidate any warranty that may apply to the device. Check regularly that all wireless  
equipment in your vehicle is mounted and operating properly. Do not store or carry  
flammable liquids, gases, or explosive materials in the same compartment as the device,  
its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags  
inflate with great force. Do not place objects, including installed or portable wireless  
equipment in the area over the air bag or in the air bag deployment area. If in-vehicle  
wireless equipment is improperly installed, and the air bag inflates, serious injury could  
result. Using your device while flying in aircraft is prohibited. Switch off your device before  
boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to  
the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.  
POTENTIALLY EXPLOSIVE ENVIRONMENTS  
Switch off your device when in any area with a potentially explosive atmosphere and obey  
all signs and instructions. Potentially explosive atmospheres include areas where you  
would normally be advised to turn off your vehicle engine. Sparks in such areas could  
cause an explosion or fire resulting in bodily injury or even death. Switch off the device at  
refueling points such as near gas pumps at service stations. Observe restrictions on the  
use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or  
where blasting operations are in progress. Areas with a potentially explosive atmosphere  
are often, but not always, clearly marked. They include below deck on boats, chemical  
transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or  
butane), and areas where the air contains chemicals or particles such as grain, dust or  
metal powders. Do not switch the computer on when wireless phone use is prohibited or  
when it may cause interference or danger.  
EMERGENCY CALLS  
- Warning! You cannot make emergency calls through this device. To make an  
emergency call you shall dial out through your mobile phone or other  
telephone call system.  
Safety and comfort - 11  
DISPOSAL INSTRUCTIONS  
Do not throw this electronic device into the trash when discarding. To minimize  
pollution and ensure utmost protection of the global environment, please  
recycle. For more information on the Waste from Electrical and Electronics  
Equipment (WEEE) regulations, visit www.acer-group.com/public/  
Sustainability.  
ENERGY STAR  
Acer's ENERGY STAR qualified products save your money by reducing  
energy cost and protecting the environment without sacrificing features or  
performance. Acer is proud to offer our customers products with the  
ENERGY STAR mark.  
What is ENERGY STAR?  
Products that are ENERGY STAR qualified use less energy and prevent greenhouse gas  
emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental  
Protection Agency. Acer is committed to offering products and services worldwide that  
help customers save money, conserve energy and improve the quality of our  
environment. The more energy we can save through higher energy efficiency, the more  
we reduce greenhouse gases and the risks of climate change. More information refers to  
www.energystar.gov or www.energystar.gov/powermanagement.  
- Note: Information in this section may not apply to your computer.  
Acer ENERGY STAR qualified products:  
- produce less heat and reduce cooling loads in warmer climates.  
- automatically go into "display Sleep" and "computer Sleep" mode after 10 and 30  
minutes of inactivity, respectively.  
- wake from "Sleep" mode if the keyboard is pressed or mouse is moved.  
- save more than 80% energy when in "Sleep" mode.  
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.  
12 - Safety and comfort  
TIPS AND INFORMATION FOR COMFORTABLE USE  
Computer users may complain of eyestrain and headaches after prolonged use. Users  
are also at risk of physical injury after long hours of working in front of a computer. Long  
work periods, bad posture, poor work habits, stress, inadequate working conditions,  
personal health and other factors greatly increase the risk of physical injury.  
Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis  
or other musculoskeletal disorders. The following symptoms may appear in the hands,  
wrists, arms, shoulders, neck or back:  
- Numbness, or a burning or tingling sensation.  
- Aching, soreness or tenderness.  
- Pain, swelling or throbbing.  
- Stiffness or tightness.  
- Coldness or weakness.  
If you have these symptoms, or any other recurring or persistent discomfort and/or pain  
related to computer use, consult a physician immediately and inform your company's  
health and safety department.  
The following section provides tips for more comfortable computer use.  
Finding your comfort zone  
Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or  
raising your sitting height to achieve maximum comfort. Observe the following tips:  
- Refrain from staying too long in one fixed posture.  
- Avoid slouching forward and/or leaning backward.  
- Stand up and walk around regularly to remove the strain on your leg muscles.  
- Take short rests to relax your neck and shoulders.  
- Avoid tensing your muscles or shrugging your shoulders.  
- Install the external display, keyboard and mouse properly and within comfortable  
reach.  
Safety and comfort - 13  
- If you view your monitor more than your documents, place the display at the center  
of your desk to minimize neck strain.  
Taking care of your vision  
Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room  
lighting, poorly focused screens, very small typefaces and low-contrast displays could  
stress your eyes. The following sections provide suggestions on how to reduce eyestrain.  
Eyes  
- Rest your eyes frequently.  
- Give your eyes regular breaks by looking away from the monitor and focusing on a  
distant point.  
- Blink frequently to keep your eyes from drying out.  
Display  
- Keep your display clean.  
- Keep your head at a higher level than the top edge of the display so your eyes point  
downward when looking at the middle of the display.  
- Adjust the display brightness and/or contrast to a comfortable level for enhanced text  
readability and graphics clarity.  
- Eliminate glare and reflections by:  
placing your display in such a way that the side faces the window or any light source,  
minimizing room light by using drapes, shades or blinds,  
using a task light,  
changing the display's viewing angle,  
using a glare-reduction filter,  
using a display visor, such as a piece of cardboard extended from the display's top  
front edge.  
- Avoid adjusting your display to an awkward viewing angle.  
- Avoid looking at bright light sources for extended periods of time.  
14 - Safety and comfort  
Developing good work habits  
The following work habits make computer use more relaxing and productive:  
- Take short breaks regularly and often.  
- Perform some stretching exercises.  
- Breathe fresh air as often as possible.  
- Exercise regularly and maintain a healthy body.  
- Warning! We do not recommend using the computer on a couch or bed. If this  
is unavoidable, work for only short periods, take breaks regularly, and do some  
stretching exercises.  
- Note: For more information, please refer to "Regulations and safety notices" on  
Safety and comfort - 15  
FIRST THINGS FIRST  
We would like to thank you for making an Acer notebook your choice for  
meeting your mobile computing needs.  
Your guides  
To help you use your Acer notebook, we have designed a set of guides:  
First off, the Setup Guide helps you get started with setting up your  
computer.  
The Quick Guide introduces you to the basic features and functions of  
your new computer. For more on how your computer can help you to be  
more productive, please refer to the User’s Manual. This guide contains  
detailed information on such subjects as system utilities, data recovery,  
expansion options and troubleshooting. In addition it contains general  
regulations and safety notices for your notebook. It is available from  
Desktop; double-click the Help icon and click User’s Manual in the menu  
that opens.  
Basic care and tips for using your computer  
Turning your computer on and off  
To turn the power off, do any of the following:  
• Use the Windows shutdown command: Press the Windows key + <C>,  
click Settings > Power then click Shut Down.  
16 - First things first  
       
If you need to power down the computer for a short while, but don’t want  
to completely shut it down, you can put it into Hibernate by pressing the  
power button.  
You can also put the computer in sleep mode by pressing the sleep hotkey  
<Fn> + <F4>.  
Note: If you cannot power off the computer normally, press and hold  
the power button for more than four seconds to shut down the  
computer. If you turn off the computer and want to turn it on again, wait  
at least two seconds before powering up.  
Taking care of your computer  
Your computer will serve you well if you take care of it.  
• Do not expose the computer to direct sunlight. Do not place it near  
sources of heat, such as a radiator.  
• Do not expose the computer to temperatures below 0º C (32º F) or  
above 50º C (122º F).  
• Do not subject the computer to magnetic fields.  
• Do not expose the computer to rain or moisture.  
• Do not spill water or any liquid on the computer.  
• Do not subject the computer to heavy shock or vibration.  
• Do not expose the computer to dust or dirt.  
• Never place objects on top of the computer.  
• Do not slam the computer display when you close it.  
First things first - 17  
 
• Never place the computer on uneven surfaces.  
Taking care of your AC adapter  
Here are some ways to take care of your AC adapter:  
• Do not connect the adapter to any other device.  
• Do not step on the power cord or place heavy objects on top of it.  
Carefully route the power cord and any cables away from foot traffic.  
• When unplugging the power cord, do not pull on the cord itself but pull  
on the plug.  
• The total ampere ratings of the equipment plugged in should not exceed  
the ampere rating of the cord if you are using an extension cord. Also,  
the total current rating of all equipment plugged into a single wall outlet  
should not exceed the fuse rating.  
Cleaning and servicing  
When cleaning the computer, follow these steps:  
1. Turn off the computer.  
2. Disconnect the AC adapter.  
3. Use a soft, moist cloth. Do not use liquid or aerosol cleaners.  
If either of the following occurs:  
• The computer has been dropped or the body has been damaged;  
• The computer does not operate normally  
18 - First things first  
   
YOUR ACER NOTEBOOK TOUR  
After setting up your computer as illustrated in the Setup Guide, let us  
show you around your new Acer computer.  
Aspire V7-581P / V7-582P / V5-573P / V5-572P / V5-552P  
Your Acer notebook tour - 19  
 
Screen view  
1
2
3
#
Icon Item  
Webcam  
Description  
Web camera for video communication.  
A light next to the webcam indicates  
that the webcam is active.  
1
Displays computer output, supports  
multi-touch input.  
2
Touchscreen  
20 - Your Acer notebook tour  
 
#
Icon Item  
Description  
Internal stereo microphones for sound  
recording.  
Note: Only the V7-582P has dual  
microphones, other models have a  
single microphone beneath the  
touchpad.  
3
Microphones  
Your Acer notebook tour - 21  
Keyboard view  
1
2
3
#
Icon Item  
Power indicator  
Description  
Indicates the computer’s power status.  
Indicates battery status.  
Charging: The light is amber when the  
battery is charging.  
1
Battery indicator  
Fully charged: The light is blue.  
22 - Your Acer notebook tour  
 
#
Icon Item  
Description  
For entering data into your computer.  
Caution: Do not use a keyboard  
protector or similar cover as the  
keyboard includes ventilation intakes  
for cooling.  
2
Keyboard  
Touch-sensitive pointing device.  
The touchpad and selection buttons  
form a single surface.  
3
Touchpad  
Press down firmly on the touchpad  
surface to perform a left click.  
Press down firmly on the lower right  
corner to perform a right click.  
Left view  
1 2  
Item  
#
Icon  
Description  
1
USB port  
Connects to USB devices.  
2
Power button  
Turns the computer on and off.  
Your Acer notebook tour - 23  
 
Right view  
1
2
3
#
Icon  
Item  
Description  
Connects to audio devices (e.g.,  
speakers, headphones) or a  
headset with microphone.  
Headset/speaker  
jack  
1
Accepts one Secure Digital card  
(SD or SDHC).  
Note: To remove the card, simply  
pull it from the slot.  
Warning: The card sticks out  
from the side of the computer.  
Ensure you don’t damage your  
card.  
2
3
SD card reader  
USB port  
Connects to USB devices.  
24 - Your Acer notebook tour  
 
Rear view  
1
2 3 4 5  
6 7  
#
Icon  
Item  
Description  
Allows the computer to stay cool.  
Do not cover or obstruct the  
openings.  
Ventilation and  
cooling fan  
1
Connects to an Ethernet 10/100/  
1000-based network.  
Note: Pull the lip down to open the  
port fully.  
Ethernet (RJ-45)  
port  
2
3
USB port with  
power-off charging  
Connects to USB devices.  
Your Acer notebook tour - 25  
 
#
Icon  
Item  
Description  
Connects to the Acer Converter  
cable, allowing for easy connection  
to a LAN, an external display or an  
additional USB device.  
Note: There are different cables  
available. Please check with your  
retailer to see which are compatible  
with your computer.  
Acer Converter  
Port  
4
Supports high-definition digital  
video connections.  
5
HDMI port  
Connects to a Kensington-  
Kensington lock  
slot  
compatible computer security lock.  
Wrap the computer security lock  
cable around an immovable object  
such as a table or handle of a  
locked drawer.  
6
7
Insert the lock into the notch and  
turn the key to secure the lock.  
Keyless models are also available.  
DC-in jack  
Connects to an AC adapter.  
Information on USB 3.0  
• USB 3.0 compatible ports are blue.  
• Compatible with USB 3.0 and earlier devices.  
26 - Your Acer notebook tour  
 
• For optimal performance, use USB 3.0-certified devices.  
• Defined by the USB 3.0 specification (SuperSpeed USB).  
Base view  
1
2
3
#
Icon  
Item  
Description  
Ventilation and  
cooling fan  
Allows the computer to stay cool.  
Do not cover or obstruct the openings.  
1
Your Acer notebook tour - 27  
 
#
2
3
Icon  
Item  
Description  
Insert a paperclip into the hole and  
press for four seconds to reset the  
computer (simulates removing and  
reinstalling the battery).  
Battery reset  
pinhole  
Speakers  
Deliver stereo audio output.  
28 - Your Acer notebook tour  
USING THE KEYBOARD  
The keyboard has full-sized keys and a numeric keypad, separate cursor,  
lock, Windows, function and special keys.  
Lock keys and embedded numeric keypad  
Note: Information in this section may not apply to your computer.  
The keyboard has three lock keys which you can toggle on and off.  
Lock key  
Description  
When Caps Lock is on, all alphabetic characters typed  
are in uppercase.  
Caps Lock  
When Num Lock is on, the keypad is in numeric mode.  
The keys function as a calculator (complete with the  
arithmetic operators +, -, *, and /). Use this mode when  
you need to do a lot of numeric data entry.  
Num Lock  
When Scroll Lock is on, the screen moves one line up or  
down when you press the up or down arrow keys  
Scroll Lock  
<Fn> + <F12> respectively. Scroll Lock does not work with some  
applications.  
Hotkeys  
The computer employs hotkeys or key combinations to access most of the  
computer's controls like screen brightness and volume output.  
Using the keyboard - 29  
     
To activate hotkeys, press and hold the <Fn> key before pressing the  
other key in the hotkey combination.  
Hotkey  
Icon Function  
Description  
Turns on / off the computer's  
network devices.  
(Network devices vary by  
configuration.)  
<Fn> + <F3>  
Airplane mode  
Puts the computer in Sleep  
mode.  
<Fn> + <F4>  
Sleep  
Switches display output  
between the display screen,  
external monitor (if connected)  
and both.  
<Fn> + <F5>  
Display toggle  
Turns the display screen  
backlight off to save power.  
Press any key to return.  
<Fn> + <F6>  
Display off  
Turns the built-in touchpad on  
and off.  
<Fn> + <F7>  
Touchpad toggle  
<Fn> + <F8>  
Speaker toggle Turns the speakers on and off.  
Turns the keyboard backlight  
Keyboard  
backlight  
on and off.  
Note: This feature is only  
available on certain models.  
<Fn> + <F9>  
30 - Using the keyboard  
Hotkey  
Icon Function  
Brightness up  
Description  
Increases the screen  
brightness.  
<Fn> + < >  
Decreases the screen  
brightness.  
<Fn> + < >  
Brightness down  
<Fn> + < >  
Volume up  
Increases the sound volume.  
Decreases the sound volume.  
<Fn> + < >  
Volume down  
<Fn> +  
<Home>  
Play or pause a selected media  
file.  
Play/Pause  
Stop  
<Fn> +  
<Pg Up>  
Stop playing the selected  
media file.  
<Fn> +  
<Pg Dn>  
Return to the previous media  
file.  
Previous  
Next  
<Fn> + <End>  
Jump to the next media file.  
Windows keys  
The keyboard has two keys that perform Windows-specific functions.  
Key  
Description  
Pressed alone it returns to the Start screen.  
It can also be used with other keys for special  
functions, please check Windows Help.  
Windows key  
Using the keyboard - 31  
 
Key  
Description  
This key has the same effect as clicking the right  
mouse button; it opens the application's context  
menu.  
Application  
key  
32 - Using the keyboard  
TOUCHPAD  
Touchpad basics  
The touchpad controls the arrow (or 'cursor') on the screen. As you slide  
your finger across the touchpad, the cursor will follow this movement.  
Note: The touchpad is sensitive to finger movement; the lighter the  
touch, the better the response.  
Please keep the touchpad and your fingers dry and clean.  
The cursor is controlled by some basic gestures:  
Single-finger slide: Slide a finger across the touchpad to  
move the cursor.  
Single-finger press or tap: Press the touchpad down, or  
lightly tap the touchpad with your finger, to perform a 'click',  
which will select or start an item. Quickly repeat the tap to perform a  
double tap or 'double click'.  
Single-finger press in the bottom-right  
corner: Press the bottom right corner of the  
touchpad  
to perform a 'right click'. In the  
Start screen, this will toggle the app  
commands, in most apps this will open a  
context menu related to the selected item.  
Touchpad - 33  
   
Drag: Press and hold the bottom left corner of the touchpad, or tap twice  
anywhere on the touchtap, then slide a second finger across the  
touchpad to select all items in an area.  
Touchpad gestures  
Windows 8 and many applications support touchpad gestures that use  
one or more fingers.  
Note: Support for touchpad gestures depends on the active application.  
This allows you to control applications with a few simple gestures, such as:  
Swipe in from edge: Access Windows tools  
by swiping into the center of the touchpad  
from the right, top or left.  
Swipe in from right edge: Toggle the charms.  
Swipe in from top edge: Toggle the app commands.  
Swipe in from left edge: Switch to the previous app.  
Two-finger slide: Swiftly scroll through web pages,  
documents and playlists by placing two fingers on the  
touchpad and moving both in any direction.  
Two-finger pinch: Zoom in and out of photos, maps and  
documents with a simple finger-and-thumb gesture.  
34 - Touchpad  
 
RECOVERY  
If you are having trouble with your computer, and the frequently asked  
questions (see page 89) do not help, you can 'recover' your computer - i.e.  
return it to an earlier state.  
This section describes the recovery tools available on your computer. Acer  
provides Acer Recovery Management, which allows you to create a  
recovery backup, a drivers and applications backup, and to start recovery  
options, either using Windows tools, or the recovery backup.  
Note: Acer Recovery Management is only available with a pre-  
installed Windows operating system.  
Important: We recommend that you create a Recovery Backup  
and Drivers and Applications Backup and as soon as possible.  
In certain situations a full recovery will require a USB recovery  
backup.  
Creating a recovery backup  
To reinstall from a USB storage drive, you must first create a recovery  
backup. The recovery backup includes the entire original contents of your  
computer’s hard drive, including Windows and all factory-loaded software  
and drivers. Using this backup will restore your computer to the same  
state as when you purchased it, while giving you an option to retain all  
settings and personal data.  
Recovery - 35  
   
Note: Since the recovery backup requires at least 16 GB of storage  
after formatting, it is recommended to use a USB drive with a capacity  
of 32 GB or larger.  
1. From Start, type 'Recovery' and then click Acer Recovery  
Management in the list of apps.  
2. Click Create Factory Default Backup. The Recovery Drive window  
36 - Recovery  
opens.  
Make sure Copy contents from the recovery partition to the recovery  
drive is selected. This provides the most complete and safest recovery  
backup.  
3. Plug in the USB drive then click Next.  
Recovery - 37  
Since the recovery backup requires at least 16 GB of storage after  
formatting, it is recommended to use a USB drive with a capacity of  
32 GB or larger.  
4. You will be shown the backup progress on the screen.  
5. Follow the process until it completes.  
6. After creating the recovery backup, you can choose to delete the  
recovery information on your computer. If you delete this information,  
you can only use the USB recovery backup to restore your computer, if  
you lose or erase the USB drive, you cannot restore your computer.  
38 - Recovery  
7. Unplug the USB drive and label it clearly.  
Important: Write a unique, descriptive label on the backup, such  
as 'Windows Recovery Backup'. Make sure you keep the backup  
in a safe place that you will remember.  
Creating a drivers and applications backup  
To create a Drivers and Applications Backup, that contains the factory-  
loaded software and drivers needed by your computer, you may use either  
Recovery - 39  
 
a USB storage drive or, if your computer features a DVD recorder, one or  
more blank recordable DVDs.  
1. From Start, type 'Recovery' and then click Acer Recovery  
Management in the list of apps.  
2. Click Create Drivers and Applications Backup.  
Plug in the USB drive or insert a blank DVD into the optical drive, then  
click Next.  
40 - Recovery  
• If you are using a USB drive, make sure your USB drive has enough  
capacity before continuing.  
• If using DVDs, it will also show the number of blank, recordable discs  
you will need to complete the recovery discs. Make sure that you  
have the required number of identical, blank discs.  
Recovery - 41  
3. Click Start to copy files.You will be shown the backup progress on the  
screen.  
4. Follow the process until it completes:  
• If you are using optical discs, the drive ejects each disc as it  
completes burning it. Remove the disc from the drive and mark it with  
a permanent marker.  
If multiple discs are required, insert a new disc when prompted, then  
click OK. Continue until the process is complete.  
• If you are using a USB drive, unplug the drive and label it clearly.  
Important: Write a unique, descriptive label on each backup,  
such as 'Drivers and Applications Backup'. Make sure you keep  
the backup in a safe place that you will remember.  
Recovering your system  
To recover your system:  
1. Perform minor fixes.  
If only one or two items of software or hardware have stopped working  
correctly, the problem may be solved by reinstalling the software or the  
device drivers.  
To reinstall software and drivers that were pre-installed at the factory,  
For instructions on reinstalling software and drivers that were not pre-  
installed, see that product’s documentation or support Web site.  
2. Revert to a previous system condition.  
If reinstalling software or drivers does not help, then the problem may be  
42 - Recovery  
 
solved by returning your system to a previous state when everything  
was working correctly.  
3. Reset your operating system.  
If nothing else has solved the problem and you want to reset your  
system, but keep your user information, see "Returning your system  
4. Reset your system to its factory condition.  
If nothing else has solved the problem and you want to reset your  
system to factory condition, see "Returning your system to its factory  
Reinstalling drivers and applications  
As a troubleshooting step, you may need to reinstall the applications and  
device drivers that came pre-installed on your computer from the factory.  
You can reinstall using either your hard drive or the backup you have  
created.  
• Other applications - If you need to reinstall software that did not come  
pre-installed on your computer, you need to follow that software’s  
installation instructions.  
• New device drivers - If you need to reinstall device drivers that did not  
come pre-installed on your computer, follow the instructions provided  
with the device.  
Recovery - 43  
 
If you are reinstalling using Windows and the recovery information stored  
on your computer:  
• From Start, type 'Recovery' and then click Acer Recovery  
Management in the list of apps.  
• Click Reinstall Drivers or Applications.  
44 - Recovery  
• You should see the Contents section of the Acer Resource Center.  
• Click the install icon for the item you want to install, then follow  
the onscreen instructions to complete the installation. Repeat  
this step for each item you want to reinstall.  
If you are reinstalling from a Drivers and Applications Backup on a DVD or  
USB drive:  
1. Insert the Drivers and Applications Backup into the disc drive or  
connect it to a free USB port.  
• If you inserted a DVD wait for Acer Resource Center to start.  
• If Acer Resource Center does not start automatically, press the  
Windows key + <E>, then double-click on the optical drive icon.  
• If you are using a USB drive, press the Windows key + <E>, then  
double-click on the drive that contains the backup. Double-click on  
ResourceCenter.  
Recovery - 45  
2. You should see the Contents section of the Acer Resource Center.  
3. Click the install icon for the item you want to install, then follow the  
onscreen prompts to complete the installation. Repeat this step for  
each item you want to reinstall.  
Returning to an earlier system snapshot  
Microsoft System Restore periodically takes a 'snapshot' of your system  
settings and saves them as restore points. In most cases of hard-to-  
resolve software problems, you can return to one of these restore points to  
get your system running again.  
Windows automatically creates an additional restore point each day, and  
also each time you install software or device drivers.  
Note: For more information about using Microsoft System Restore,  
from Start, type 'Help' and then click Help and Support in the list of  
46 - Recovery  
 
apps. Type 'Windows system restore' in the Search Help box, then  
press Enter.  
Returning to a restore point  
1. From Start, type 'Control Panel' and then click Control Panel in the list  
of apps.  
2. Click System and Security > Action Center, then click Recovery at  
the bottom of the window.  
3. Click Open System Restore, then Next.  
4. Click the latest restore point (at a time when your system worked  
correctly), click Next, then Finish.  
5. A confirmation window appears; click Yes. Your system is restored  
using the restore point you specified. This process may take several  
minutes, and may restart your computer.  
Returning your system to its factory condition  
If your computer experiences problems that are not recoverable by other  
methods, you may need to reinstall everything to return your system to its  
factory condition. You can recover from either your hard drive or the  
recovery backup you have created.  
• If you can still run Windows and have not deleted the recovery partition,  
• If you cannot run Windows, your original hard drive has been completely  
re-formatted or you have installed a replacement hard drive, see  
Recovery - 47  
 
Recovering from Windows  
Start Acer Recovery Management:  
• From Start, type 'Recovery' and then click Acer Recovery  
Management in the list of apps.  
Two options are available, Restore Factory Settings (Reset my PC) or  
Customized Restore (Refresh my PC).  
Restore Factory Settings deletes everything on your hard drive, then  
reinstalls Windows and all software and drivers that were pre-installed on  
your system. If you can access important files on your hard drive, back  
Customized Restore will attempt to retain your files (user data) but will  
reinstall all software and drivers. Software installed since you purchased  
your PC will be removed (except software installed from the Windows  
48 - Recovery  
 
Restore Factory Settings with Acer Recovery Management  
1. Click Restore Factory Settings.  
Caution: 'Restore Factory Settings' will erase all files on your  
hard drive.  
2. The Reset your PC window opens.  
Images for reference only.  
3. Click Next, then choose how to erase your files:  
Recovery - 49  
 
a. Just remove my files quickly erases all files before restoring your  
computer and takes about 30 minutes.  
b. Fully clean the drive completely cleans the drive after each file is  
erased, so no files can be viewed after the recovery. Cleaning the  
drive takes much longer, up to 5 hours, but is much more secure as  
old files are completely removed.  
4. Click Reset.  
5. The recovery process begins by restarting your computer, then  
continues by copying files to your hard drive.  
6. After the recovery has finished, you can start using your computer by  
repeating the first-start process.  
Recovering from the hard drive during startup  
1. Turn on your computer and press <Alt> + <F10> during startup. A  
screen appears asking you to choose the keyboard layout.  
2. Several options are now presented. Click Troubleshoot.  
3. Click either Refresh your PC or Reset your PC.  
Note: "Refresh your PC" enables you to restore your computer to the  
default factory condition with files intact. "Reset your PC" completely  
removes all your files and resets your computer to factory settings.  
4. Click Next. The process will take several minutes.  
50 - Recovery  
Customized Restore with Acer Recovery Management  
1. Click Customized Restore (Retain User Data).  
2. The Refresh your PC window opens.  
3. Click Next, then Refresh.  
4. The recovery process begins by restarting your computer, then  
continues by copying files to your hard drive. This process takes about  
30 minutes.  
Recovery - 51  
 
Recovering from a recovery backup  
To recover from a recovery backup on a USB drive:  
1. Find your recovery backup.  
2. If your computer does not have a built-in keyboard, make sure a  
keyboard is attached to your computer.  
3. Plug in the USB drive and turn on your computer.  
4. If it is not already enabled, you must enable the F12 Boot Menu:  
a. Press <F2> when starting your computer.  
b. Use the left or right arrow keys to select the Main menu.  
c. Press the down key until F12 Boot Menu is selected, press <F5> to  
change this setting to Enabled.  
d. Use the left or right arrow keys to select the Exit menu.  
e. Depending on the type of BIOS your computer uses, select Save  
Changes and Exit or Exit Saving Changes and press Enter. Select  
OK or Yes to confirm.  
f. Your computer will restart.  
5. During startup, press <F12> to open the boot menu. The boot menu  
allows you to select which device to start from, select the USB drive.  
a. Use your arrow keys to select USB Device, then press Enter.  
b. Windows starts from the recovery backup instead of the normal  
startup process.  
6. Select your keyboard type.  
52 - Recovery  
 
7. Select Troubleshoot and then choose the type of recovery to use:  
a. Click Advanced then System Restore to start Microsoft System  
Restore:  
Microsoft System Restore periodically takes a 'snapshot' of your  
system settings and saves them as restore points. In most cases of  
hard-to-resolve software problems, you can return to one of these  
restore points to get your system running again.  
b. Click Reset your PC to start the reset process:  
Reset your PC deletes everything on your hard drive, then reinstalls  
Windows and all software and drivers that were pre-installed on your  
system. If you can access important files on your hard drive, back  
c. Click Refresh your PC to start the refresh process:  
Refresh your PC will attempt to retain your files (user data) but will  
reinstall all software and drivers. Software installed since you  
purchased your PC will be removed (except software installed from  
Recovery - 53  
Reset your PC from the recovery backup  
Caution: Reset your PC will erase all files on your hard drive.  
1. The Reset your PC window opens.  
Images for reference only.  
2. Click Next.  
3. Select the operating system to recover (normally only one option is  
available).  
4. Choose to keep any changes to the hard drive:  
a. If you have deleted the recovery partition or otherwise changed the  
partitions on the hard drive and want to keep these changes, select  
No.  
b. To completely restore your computer to Factory Settings, select Yes.  
5. Choose how to erase your files:  
a. Just remove my files quickly erases all files before restoring your  
computer and takes about 30 minutes.  
b. Fully clean the drive completely cleans the drive after each file is  
erased, so no files can be viewed after the recovery. Cleaning the  
54 - Recovery  
 
drive takes much longer, up to 5 hours, but is much more secure as  
old files are completely removed.  
6. Click Reset.  
7. After the recovery has finished, you can start using your computer by  
repeating the first-start process.  
Refresh your PC from the recovery backup  
1. The Refresh your PC window opens.  
2. Click Next.  
3. Select the operating system to recover (normally only one option is  
available).  
4. Click Refresh.  
5. The recovery process begins by restarting your computer, then  
continues by copying files to your hard drive. This process takes about  
30 minutes.  
Recovery - 55  
 
POWER MANAGEMENT  
This computer has a built-in power management unit that monitors system  
activity. System activity refers to any activity involving one or more of the  
following devices: keyboard, mouse, hard disk, peripherals connected to  
the computer, and video memory. If no activity is detected for a period of  
time, the computer stops some or all of these devices in order to conserve  
energy.  
Disable Fast startup  
Your computer uses Fast startup to start quickly, but also uses a small  
amount of power to check for signals to start. These checks will slowly  
drain your computer’s battery.  
If you prefer to reduce your computer’s power requirements and  
environmental impact, turn off Fast startup:  
56 - Power management  
   
Note: If Fast startup is off, your computer will take longer to start from  
Sleep. Your computer will also not start if it receives an instruction to  
start over a network (Wake on LAN).  
1. Open the Desktop.  
2. Click Power Options in the Notification area.  
3. Select More Power Options.  
4. Select Choose what the power buttons do.  
Power management - 57  
5. To access Shutdown Settings, select Change settings that are  
currently unavailable.  
6. Scroll down and disable Turn on fast startup.  
7. Select Save changes.  
58 - Power management  
BATTERY PACK  
The computer uses an embedded battery pack that gives you long use  
between charges.  
Battery pack characteristics  
The battery is recharged whenever you connect the computer to the AC  
adapter. Your computer supports charge-in-use, enabling you to recharge  
the battery while you continue to operate the computer. However,  
recharging with the computer turned off results in a significantly faster  
charge time.  
Charging the battery  
Plug the AC adapter into the computer, and connect to a mains power  
outlet. You can continue to operate your computer on AC power while your  
battery is charging. However, charging the battery with the computer  
turned off results in a significantly faster charge time.  
Note: You are advised to charge the battery before retiring for the day.  
Charging the battery overnight before traveling enables you to start  
the next day with a fully charged battery.  
Conditioning a new battery pack  
Before you use a battery pack for the first time, there is a conditioning  
process that you should follow:  
Battery pack - 59  
     
1. Connect the AC adapter and fully charge the battery.  
2. Disconnect the AC adapter.  
3. Turn on the computer and operate using battery power.  
4. Fully deplete the battery until the battery-low warning appears.  
5. Reconnect the AC adapter and fully charge the battery again.  
Follow these steps again until the battery has been charged and  
discharged three times.  
Use this conditioning process for all new batteries, or if a battery hasn't  
been used for a long time.  
Warning! Do not expose battery packs to temperatures below 0°  
C (32° F) or above 45° C (113° F). Extreme temperatures may  
adversely affect the battery pack.  
By following the battery conditioning process you condition your battery to  
accept the maximum possible charge. Failure to follow this procedure will  
prevent you from obtaining the maximum battery charge, and will also  
shorten the effective lifespan of the battery.  
In addition, the useful lifespan of the battery is adversely affected by the  
following usage patterns:  
• Using the computer on constant AC power.  
• Not discharging and recharging the battery to its extremes, as described  
above.  
60 - Battery pack  
• Frequent use; the more you use the battery, the faster it will reach the  
end of its effective life. A standard computer battery has a life span of  
about 300 charges.  
Optimizing battery life  
Optimizing battery life helps you get the most out of battery operation,  
prolonging the charge/recharge cycle and improving recharging efficiency.  
You are advised to follow the suggestions set out below:  
• Use AC power whenever possible, reserving battery for mobile use.  
• Remove accessories that are not being used (e.g. a USB disk drive), as  
they can continue to draw power.  
• Store your PC in a cool, dry place. The recommended temperature is  
10° C (50° F) to 30° C (86° F). Higher temperatures cause the battery to  
self-discharge faster.  
• Excessive recharging decreases the battery life.  
• Look after your AC adapter and battery.  
Checking the battery level  
The power meter indicates the current battery level. Rest the cursor over  
the battery/power icon on the taskbar to see the battery's present charge  
level.  
Battery-low warning  
When using battery power pay attention to the power meter.  
Battery pack - 61  
     
Warning! Connect the AC adapter as soon as possible after the  
battery-low warning appears. Data may be lost if the battery is  
allowed to become fully depleted and the computer shuts down.  
When the battery-low warning appears, the recommended course of  
action depends on your situation:  
Situation  
Recommended Action  
1. Plug the AC adapter into the computer, and then  
connect to the main power supply.  
2. Save all necessary files.  
3. Resume work.  
Turn off the computer if you want to recharge the  
battery rapidly.  
The AC adapter  
and a power outlet  
are available.  
The AC adapter or 1. Save all necessary files.  
a power outlet is  
unavailable.  
2. Close all applications.  
3. Turn off the computer.  
62 - Battery pack  
TRAVELING WITH YOUR COMPUTER  
This section gives you tips and hints to consider when moving around or  
traveling with your computer.  
Disconnecting from the desktop  
Follow these steps to disconnect your computer from external  
accessories:  
1. Save any open files.  
2. Remove discs from optical drive(s).  
3. Shut down the computer.  
4. Close the display cover.  
5. Disconnect the cord from the AC adapter.  
6. Disconnect the keyboard, pointing device, printer, external monitor and  
other external devices.  
7. Disconnect the Kensington lock if you are using one to secure the  
computer.  
Moving around  
When you are just moving within short distances, for example, from your  
office desk to a meeting room.  
Traveling with your computer - 63  
     
Preparing the computer  
Before moving the computer, close and latch the display cover to place it  
in Sleep mode. You can now safely take the computer anywhere you go  
within the building. To bring the computer out of Sleep mode, open the  
display; then press and release the power button.  
If you are taking the computer to a client's office or a different building, you  
may choose to shut down the computer:  
Press the Windows key + <C>, click Settings > Power then click Shut  
Down  
Or:  
You can put the computer in Sleep mode by pressing <Fn> + <F4>. Then  
close the display.  
When you are ready to use the computer again, open the display; then  
press and release the power button.  
Note: The computer may enter Hibernation or Deep Sleep mode after  
being in Sleep mode for a period of time.  
What to bring to meetings  
If your meeting is relatively short, you probably do not need to bring  
anything with you other than your computer. If your meeting will be longer,  
or if your battery is not fully charged, you may want to bring the AC  
adapter with you to plug in your computer in the meeting room.  
64 - Traveling with your computer  
   
If the meeting room does not have an electrical outlet, reduce the drain on  
the battery by putting the computer in Sleep mode. Press <Fn> + <F4> or  
close the display cover whenever you are not actively using the computer.  
Taking the computer home  
When you are moving from your office to your home or vice versa.  
Preparing the computer  
After disconnecting the computer from your desktop, follow these steps to  
prepare the computer for the trip home:  
• Check that you have removed all media and compact discs from the  
drive(s). Failure to remove the media can damage the drive head.  
• Pack the computer in a protective case that can prevent the computer  
from sliding around and cushion it if it should fall.  
Caution: Avoid packing items next to the top cover of the  
computer. Pressure against the top cover can damage the  
screen.  
What to take with you  
Unless you have some items at home, take the following items with you:  
• AC adapter and power cord.  
• The printed Setup Guide.  
Traveling with your computer - 65  
     
Special considerations  
Follow these guidelines to protect your computer while traveling to and  
from work:  
• Minimize the effects of temperature changes by keeping the computer  
with you.  
• If you need to stop for an extended period of time and cannot carry the  
computer with you, leave the computer in the trunk of the car to avoid  
exposing the computer to excessive heat.  
• Changes in temperature and humidity can cause condensation. Allow  
the computer to return to room temperature, and inspect the screen for  
condensation before turning on the computer. If the temperature change  
is greater than 10° C (18° F), allow the computer to come to room  
temperature slowly. If possible, leave the computer for 30 minutes in an  
environment with  
temperature.  
a
temperature between outside and room  
Setting up a home office  
If you frequently work on your computer at home, you may want to  
purchase a second AC adapter for use at home. With a second AC  
adapter, you can avoid carrying the extra weight to and from home.  
If you use your computer at home for significant periods of time, you might  
also want to add an external keyboard, monitor or mouse.  
66 - Traveling with your computer  
   
Traveling with the computer  
When you are moving within a larger distance, for instance, from your  
office building to a client's office building or traveling locally.  
Preparing the computer  
Prepare the computer as if you were taking it home. Make sure that the  
battery in the computer is charged. Airport security may require you to turn  
on your computer when carrying it into the gate area.  
What to take with you  
Take the following items with you:  
• AC adapter  
• Additional printer driver files if you plan to use another printer  
Special considerations  
In addition to the guidelines for taking the computer home, follow these  
guidelines to protect your computer while traveling:  
• Always take the computer as carry-on luggage.  
• If possible, have the computer inspected by hand. Airport security X-ray  
machines are safe, but do not put the computer through a metal  
detector.  
Traveling internationally with the computer  
When you are moving from country to country.  
Traveling with your computer - 67  
         
Preparing the computer  
Prepare the computer as you would normally prepare it for traveling.  
What to bring with you  
Bring the following items with you:  
• AC adapter.  
• Power cords that are appropriate for the country to which you are  
traveling.  
• Additional printer driver files if you plan to use another printer.  
• Proof of purchase, in case you need to show it to customs officials.  
• International Travelers Warranty passport.  
Special considerations  
Follow the same special considerations as when traveling with the  
computer.  
In addition, these tips are useful when traveling internationally:  
• When traveling in another country, check that the local AC voltage and  
the AC adapter power cord specifications are compatible. If not,  
purchase a power cord that is compatible with the local AC voltage. Do  
not use converter kits sold for appliances to power the computer.  
• If you are using the modem, check if the modem and connector are  
compatible with the telecommunications system of the country you are  
traveling in.  
68 - Traveling with your computer  
     
Traveling with your computer - 69  
SECURING YOUR COMPUTER  
Your computer is a valuable investment that you need to take care of.  
Learn how to protect and take care of your computer.  
Security features include hardware and software locks — a security notch  
and passwords.  
Using a computer security lock  
The computer comes with a Kensington-compatible security slot for a  
security lock.  
Wrap a computer security lock cable around an immovable object such as  
a table or handle of a locked drawer. Insert the lock into the notch and turn  
the key to secure the lock. Some keyless models are also available.  
Using passwords  
Passwords protect your computer from unauthorized access. Setting  
these passwords creates several different levels of protection for your  
computer and data:  
• Supervisor Password prevents unauthorized entry into the BIOS utility.  
Once set, you must enter this password to gain access to the BIOS  
utility. See "BIOS utility" on page 88.  
• User Password secures your computer against unauthorized use.  
Combine the use of this password with password checkpoints on boot-  
up and resume from Hibernation (if available) for maximum security.  
70 - Securing your computer  
     
• Password on Boot secures your computer against unauthorized use.  
Combine the use of this password with password checkpoints on boot-  
up and resume from Hibernation (if available) for maximum security.  
Important: Do not forget your Supervisor Password! If you forget  
your password, please get in touch with your dealer or an  
authorized service center.  
Entering passwords  
When a password is set, a password prompt appears in the center of the  
display screen.  
• When the Supervisor Password is set, a prompt appears when you the  
BIOS utility.  
• Type the Supervisor Password and press <Enter> to access the BIOS  
utility. If you enter the password incorrectly, a warning message  
appears. Try again and press <Enter>.  
• When the User Password is set and the password on boot parameter is  
enabled, a prompt appears at boot-up.  
• Type the User Password and press <Enter> to use the computer. If you  
enter the password incorrectly, a warning message appears. Try again  
and press <Enter>.  
Important: You have three chances to enter a password. If you  
fail to enter the password correctly after three tries, the system  
halts. Press and hold the power button for four seconds to shut  
down the computer. Then turn on the computer again, and try  
again.  
Securing your computer - 71  
 
ACER THEFT SHIELD  
Note: This feature is only available on certain models.  
Acer Theft Shield is a tool for your computer that helps prevent theft by  
alerting you if your computer is moved out of range of your Android  
cellphone or the selected wireless network.  
To start Acer Theft Shield, double-click the Acer Theft Shield icon on  
Desktop, or from Start simply start typing ’Acer Theft Shield’ to open  
Search and list the results.  
Note: Acer Theft Shield needs a Windows Log On password. If you  
have not set a password, you will be reminded to set one.  
Once Acer Theft Shield is running, you will be asked to select the type of  
detection you wish to use. You may select:  
Use an Android phone.  
72 - Acer Theft Shield  
 
Use a Wi-Fi network.  
If you select Use an Android phone, you will be shown a QR (Quick  
Reference) code that you can scan using your phone. The QR contains a  
link that will allow you to download the Android app to your phone.  
Tip: If you do not select to use an Android phone at this stage, you can  
select to use an Android phone at any time from "Settings" on page  
75.  
Acer Theft Shield - 73  
Note: If your phone does not have a barcode reader installed, you will  
need to download one before you can scan the QR code.  
Once you have downloaded the Android app to your phone, click Next to  
start setting up Acer Theft Shield. Click Start to turn on your notebook’s  
Wi-Fi hotspot feature, this will allow your phone to detect the notebook.  
Using Acer Theft Shield  
General  
Once you have selected the method to use, you will be shown the General  
page which allows you to activate Acer Theft Shield and select a hotkey  
combination to activate Acer Theft Shield.  
You can press the hotkey combination to protect your computer at any  
time.  
74 - Acer Theft Shield  
   
Settings  
The Settings page allows you to change alarm settings and also set up  
notifications on your Android phone.  
Tap Edit under Configure your notebook’s Wi-Fi hotspot network to  
change the SSID that your notebook will broadcast while linking to your  
Android cellphone.  
You can also change the alarm notification duration from the drop-down  
menu under Alarm mode settings.  
Tip: To view the QR code to download the Android app again, click the  
icon.  
Acer Theft Shield - 75  
 
WIRELESS NETWORKS  
Connecting to the Internet  
Your computer's wireless connection is turned on by default.  
Windows will detect and display a list of available networks during setup.  
Select your network and enter the password if required.  
Otherwise, open Internet Explorer and follow the instructions.  
Please refer to your ISP or router documentation.  
Acer Instant Connect  
Instant Connect ensures a faster connection to any of the networks that  
your computer connects to most frequently.  
Wireless networks  
A wireless LAN or WLAN is a wireless local area network, which may link two  
or more computers without using wires. Setting up a wireless network is easy  
and allows you to share files, peripheral devices and an Internet connection.  
What are benefits of a wireless network?  
Mobility  
Wireless LAN systems allow you and other users of your home network to  
share access to files and devices connected to the network, for example a  
printer or scanner.  
76 - Wireless networks  
       
Also you can share an internet connection with other computers in your home.  
Installation speed and simplicity  
Installing a wireless LAN system can be fast and easy and eliminates the  
need to pull cables through walls and ceilings.  
Components of a wireless LAN  
To set up your Wireless network at home you need to have the following:  
Access point (router)  
Access points (routers) are two-way transceivers that broadcast data into the  
surrounding environment. Access points act as a mediator between wired  
and wireless network. Most routers have a built-in DSL modem that will allow  
you access to a high speed DSL internet connection. The ISP (Internet  
Service Provider) you have chosen normally supplies a modem/router with  
the subscription to their services. Read carefully the documentation supplied  
with your Access point/router for detailed setup instructions.  
Wireless networks - 77  
USING A BLUETOOTH CONNECTION  
Bluetooth is a technology enabling you to transfer data wirelessly over  
short distances between many different types of devices. Bluetooth-  
enabled devices include computers, cell phones, tablets, wireless  
headsets, and keyboards.  
To use Bluetooth, you must ensure the following:  
1. Bluetooth is enabled on both devices.  
2. Your devices are "paired" (or connected).  
Enabling and disabling Bluetooth  
The Bluetooth adapter must be enabled on both devices. For your  
computer, this may be an external switch, a software setting, or a separate  
Bluetooth dongle plugged into the computer’s USB port (if no internal  
Bluetooth adapter is available).  
Note: Please check your devices owner’s manual to determine how to  
turn on its Bluetooth adapter.  
78 - Using a Bluetooth connection  
   
Enabling Bluetooth from Windows 8  
Bluetooth on your computer is disabled by default. To enable your  
computer’s Bluetooth adapter, do the following:  
1. Open the Charms and select Settings > Change PC Settings >  
Wireless, or press the Windows key  
in  
+ <W> and then type ’Wireless’;  
the results, click on Wireless.  
2. Click the toggle next to Bluetooth to enable/disable it.  
3. Then, from the Desktop notification area, click the Bluetooth icon, and  
select Open Settings.  
Using a Bluetooth connection - 79  
 
4. Select the Allow Bluetooth devices to find this computer check box,  
click Apply, and then click OK.  
Adding a Bluetooth device  
Every new device must first be "paired" with your computer’s Bluetooth  
adapter. This means it must first be authenticated for security purposes.  
You only need to pair once. After that, simply turning on the Bluetooth  
adapter of both devices will connect them.  
80 - Using a Bluetooth connection  
 
From the notification area, click the Bluetooth icon, and select Add a  
Bluetooth Device.  
Click on the device you want to add.  
Using a Bluetooth connection - 81  
A code displays on your computer, which should match the code  
displayed on your device. Select Yes. Then, accept the pairing from your  
device.  
Note: Some devices using older versions of the Bluetooth technology  
require both devices to enter a PIN. In the case of one of the devices  
not having any inputs (as in a headset), the passcode is hardcoded  
into the device (usually "0000" or "1234"). Consult your device’s user  
manual for more information.  
Your device will show up in the list of devices if it was successfully paired.  
Open the Control Panel and under Hardware and Sound click on View  
82 - Using a Bluetooth connection  
devices and printers. Right click on your device and select Advanced  
Operations > Connect to operation window.  
Using a Bluetooth connection - 83  
The operation window enables you to play music and audio from your  
device through your computer, send files to your device and change  
Bluetooth settings.  
84 - Using a Bluetooth connection  
ACER CONVERTER PORT  
Note: There are different cables available. Please check with your  
retailer to see which are compatible with your computer.  
The Acer Converter Port is a proprietary port that allows you to extend the  
connectivity options of your computer using a single cable.  
The Acer Converter Port supports one or more of the following through a  
dedicated cable: A LAN connection, an external display (VGA) port and an  
additional USB port.  
You may connect more than one peripheral to the Acer Converter cable  
that is compatible with your computer.  
Acer Converter Port - 85  
 
HDMI  
HDMI (High-Definition Multimedia Interface) is an industry-supported,  
uncompressed, all-digital audio/video interface. HDMI provides an  
interface between any compatible digital audio/video source, such as a  
set-top box, DVD player, and A/V receiver and a compatible digital audio  
and/or video monitor, such as a digital television (DTV), over a single  
cable.  
Use the HDMI port on your computer to connect with high-end audio and  
video equipment. Single cable implementation allows tidy setup and fast  
connection.  
86 - HDMI  
 
UNIVERSAL SERIAL BUS (USB)  
The USB port is a high-speed serial bus which allows you to connect USB  
peripherals without taking up system resources.  
Universal Serial Bus (USB) - 87  
 
BIOS UTILITY  
The BIOS utility is a hardware configuration program built into your  
computer's BIOS.  
Your computer is already properly configured and optimized, and you do  
not need to run this utility. However, if you encounter configuration  
problems, you may need to run it.  
To activate the BIOS utility, press <F2> during the POST while the  
computer logo is being displayed.  
Boot sequence  
To set the boot sequence in the BIOS utility, activate the BIOS utility, then  
select Boot from the categories listed at the top of the screen.  
Setting passwords  
To set a password on boot, activate the BIOS utility, then select Security  
from the categories listed at the top of the screen. Find Password on  
boot: and use the <F5> and <F6> keys to enable this feature.  
88 - BIOS utility  
       
FREQUENTLY ASKED QUESTIONS  
The following is a list of possible situations that may arise during the use  
of your computer. Easy solutions are provided for each one.  
I turned on the power, but the computer does not start or boot up  
Look at the power indicator:  
• If it is not lit, no power is being supplied to the computer. Check the  
following:  
• If you are using on the battery, it may be low and unable to power the  
computer. Connect the AC adapter to recharge the battery pack.  
• Make sure that the AC adapter is properly plugged into the computer  
and to the power outlet.  
• If it is lit, check the following:  
• Do you have a USB storage device (USB disk or smartphone)  
plugged into your computer? Unplug it and press <Ctrl> + <Alt> +  
<Del> to restart the system.  
Nothing appears on the screen  
The computer’s power management system automatically blanks the  
screen to save power. Press any key to turn the display back on.  
If pressing a key does not turn the display back on, three things might be  
the cause:  
Frequently asked questions - 89  
   
• The brightness level might be too low. Press <Fn> + < > (increase) to  
adjust the brightness level.  
• The display device might be set to an external monitor. Press the  
display toggle hotkey <Fn> + <F5> to toggle the display back to the  
computer.  
• If the Sleep indicator is lit, the computer is in Sleep mode. Press and  
release the power button to resume.  
No audio is heard from the computer  
Check the following:  
• The volume may be muted. In Windows, look at the volume control  
(speaker) icon on the taskbar. If it is crossed-out, click the icon and  
deselect the Mute all option.  
• The volume level may be too low. In Windows, look at the volume  
control icon on the taskbar. You can also use the volume control buttons  
to adjust the volume.  
• If headphones, earphones or external speakers are connected to the  
line-out port on the computer, the internal speakers automatically turn  
off.  
The keyboard does not respond  
Try attaching an external keyboard to a USB port on the computer. If it  
works, contact your dealer or an authorized service center as the internal  
keyboard cable may be loose.  
90 - Frequently asked questions  
The printer does not work  
Check the following:  
• Make sure that the printer is connected to a power outlet and that it is  
turned on.  
• Make sure that the printer cable is connected securely to a USB port  
and the corresponding port on the printer.  
Requesting service  
International Travelers Warranty (ITW)  
Your computer is backed by an International Travelers Warranty (ITW)  
that gives you security and peace of mind when traveling. Our worldwide  
network of service centers are there to give you a helping hand.  
An ITW passport comes with your computer. This passport contains all  
you need to know about the ITW program. A list of available, authorized  
service centers is in this handy booklet. Read this passport thoroughly.  
Always have your ITW passport on hand, especially when you travel, to  
receive the benefits from our support centers. Place your proof-of-  
purchase in the flap located inside the front cover of the ITW passport.  
If the country you are traveling in does not have an Acer-authorized ITW  
service site, you can still get in contact with our offices worldwide. Please  
visit www.acer.com.  
Frequently asked questions - 91  
 
Before you call  
Please have the following information available when you call Acer for  
online service, and please be at your computer when you call. With your  
support, we can reduce the amount of time a call takes and help solve  
your problems efficiently. If there are error messages or beeps reported by  
your computer, write them down as they appear on the screen (or the  
number and sequence in the case of beeps).  
You are required to provide the following information:  
Name:  
Address:  
Telephone number:  
Machine and model type:  
Serial number:  
Date of purchase:  
92 - Frequently asked questions  
F
Tips and hints for using Windows 8  
We know this is a new operating system that will take some getting used  
to, so we've created a few pointers to help you get started.  
Three concepts you might want to keep in mind  
1. Start  
The Start button is no longer available; you can launch apps from the Start  
screen.  
2. Tiles  
Live tiles are similar to thumbnails of the apps.  
3. Charms  
Charms allow you to perform useful functions, such as sharing content,  
turning off your PC or changing settings.  
How do I access the charms?  
Swipe the right-hand edge of the screen inwards.  
How do I get to Start?  
Press the Windows key; or swipe the right-hand edge of the screen  
inwards and tap the Start charm.  
Frequently asked questions - 93  
       
How do I jump between apps?  
Swipe the left-hand edge of the screen inwards to cycle through apps that  
are currently running.  
How do I turn off my computer?  
Swipe the right-hand edge of the screen inwards, tap Settings > Power  
and select the action you'd like to take. Alternatively, from Desktop, tap  
Acer Power Button and select the action you'd like to take.  
Why is there a new interface?  
The new interface for Windows 8 is designed to work well with touch input.  
Windows Store apps will automatically use the whole screen and don't  
require closing in the traditional way. Windows Store apps will be  
displayed on Start using live-tiles.  
What are ’live tiles?’  
Live tiles are similar to thumbnails of the app that will be updated with new  
content whenever you're connected to the Internet. So, for example, you  
can view weather or stock updates without needing to open the app.  
How do I unlock my computer?  
Swipe the lock screen upwards and tap a user account icon to unlock the  
computer. If your account has a password set, you will need to enter the  
password to continue.  
94 - Frequently asked questions  
       
Tap and hold the preview icon to see the characters you've entered to  
ensure the password is correct.  
How do I personalize my computer?  
You can personalize Start with a different background image or by  
arranging the tiles to suit your personal needs.  
To change the background, swipe the right-hand edge of the screen  
inwards and tap Settings > Change PC settings > Personalize. Tap  
Start screen at the top of the page and select a color and image.  
How do I move tiles?  
Tap and hold a tile to select it, then drag it to the place on Start that you  
want it to appear. Other tiles will be moved to accommodate the tile in its  
new location.  
Can I make tiles bigger or smaller?  
Tap and drag the tile downwards and release it. Select Smaller or Larger  
from the menu that appears at the bottom of the screen.  
How do I personalize the Lock screen?  
You can personalize the lock screen with a different image or to show you  
quick status and notifications to suit your personal needs.  
To change the background, swipe the right-hand edge of the screen  
inwards and tap Settings > Change PC settings > Personalize. Tap  
Lock screen at the top of the page and select the image and apps you  
would like to see on the lock screen.  
Frequently asked questions - 95  
 
So, how do I close an app?  
Swipe the window downwards from the top to the bottom of the screen.  
Can I change the screen resolution?  
Swipe the right-hand edge of the screen inwards and tap Search, tap the  
text box to open the onscreen keyboard and start typing 'Control Panel' to  
display the results; tap Control Panel > Adjust screen resolution.  
I want to use Windows in the way that I'm used to - give me my  
desktop back!  
From Start tap the Desktop tile to see a traditional desktop. You can pin  
apps you frequently use to the taskbar to easily open them.  
If you click an app that is not a Windows Store app, Windows will  
automatically open the app using Desktop.  
Where are my apps?  
Swipe the right-hand edge of the screen inwards and tap Search, type the  
name of the app you would like to open using the pop-up keyboard.  
Results will be displayed on the left-hand side of the screen.  
To view the complete list of apps, swipe upwards from the bottom of the  
screen and tap All apps.  
96 - Frequently asked questions  
   
How do I make an app appear on Start?  
If you're in All apps and you want to make an app appear on Start, tap and  
drag the app downwards and release it. Tap Pin to Start from the menu  
that appears at the bottom of the screen.  
How do I remove a tile from Start?  
Tap and drag the app downwards and release it. Tap Unpin from Start  
from the menu that appears at the bottom of the screen.  
How do I make an app appear on my taskbar in Desktop?  
If you're in All apps and you want to make an app appear on the taskbar in  
Desktop, tap and drag the app downwards and release it. Select Pin to  
taskbar from the menu that appears at the bottom of the screen.  
How do I install apps?  
You can download Windows Store apps from Store. You will need to have  
a Microsoft ID to purchase and download apps from Store.  
I can't find apps like Notepad and Paint! Where are they?  
Swipe the right-hand edge of the screen inwards and tap Search, type the  
name of the app you would like to open using the pop-up keyboard.  
Alternatively, open All apps and scroll to ’Windows Accessories’ to see the  
list of legacy programs.  
Frequently asked questions - 97  
What is a Microsoft ID (account)?  
A Microsoft account is an email address and password that you use to  
sign in to Windows. You can use any email address, but it is best if you  
choose the one you already use to communicate with friends and sign in  
to your favorite websites. When you sign in to your PC with a Microsoft  
account, you'll connect your PC to the people, files, and devices you care  
about.  
Do I need one?  
You do not need a Microsoft ID to use Windows 8, but it makes life easier  
because you can sync data across different machines you sign in to using  
a Microsoft ID.  
How do I get one?  
If you've already installed Windows 8 and didn't sign in with a Microsoft  
account or you don't have a Microsoft account and want to get one, swipe  
the right-hand edge of the screen inwards and tap Settings > Change PC  
settings > Users > Switch to a Microsoft account, and follow the  
onscreen instructions.  
How do I add a favorite to Internet Explorer?  
Internet Explorer 10 doesn't have traditional favorites, instead you can pin  
shortcuts to Start. Once you have the page open, swipe upwards from the  
bottom edge of the screen to open the menu at the bottom of the screen.  
Tap Pin to Start.  
98 - Frequently asked questions  
   
How do I check for Windows updates?  
Swipe the right-hand edge of the screen inwards and tap Settings >  
Change PC settings > Windows Updates. Tap Check for updates  
now.  
Where can I get more information?  
For more information please visit the following pages:  
• Windows 8 tutorials: www.acer.com/windows8-tutorial  
• Support FAQs: www.acer.com/support  
Frequently asked questions - 99  
   
Troubleshooting  
This chapter shows you how to deal with common system problems.  
Read it before calling a technician if a problem occurs. Solutions to more  
serious problems require opening up the computer. Do not attempt to  
open the computer yourself; contact your dealer or authorized service  
center for assistance.  
Troubleshooting tips  
This computer incorporates an advanced design that delivers onscreen  
error message reports to help you solve problems.  
If the system reports an error message or an error symptom occurs, see  
"Error messages" below. If the problem cannot be resolved, contact your  
dealer. See "Requesting service" on page 90.  
Error messages  
If you receive an error message, note the message and take the corrective  
action. The following table lists the error messages in alphabetical order  
together with the recommended course of action.  
Error messages  
Corrective action  
Contact your dealer or an authorized service  
center.  
CMOS battery bad  
CMOS checksum  
error  
Contact your dealer or an authorized service  
center.  
100 -  
     
Error messages  
Corrective action  
Insert a system (bootable) disk, then press  
<Enter> to reboot.  
Disk boot failure  
Press <F2> (during POST) to enter the BIOS  
utility, then press Exit in the BIOS utility to  
reboot.  
Equipment  
configuration error  
Contact your dealer or an authorized service  
center.  
Hard disk 0 error  
Hard disk 0 extended Contact your dealer or an authorized service  
type error  
center.  
Contact your dealer or an authorized service  
center.  
I/O parity error  
Keyboard error or no Contact your dealer or an authorized service  
keyboard connected center.  
Keyboard interface Contact your dealer or an authorized service  
error  
center.  
Press <F2> (during POST) to enter the BIOS  
utility, then press Exit in the BIOS utility to  
reboot.  
Memory size  
mismatch  
If you still encounter problems after going through the corrective  
measures, please contact your dealer or an authorized service center for  
assistance.  
- 101  
REGULATIONS AND SAFETY  
NOTICES  
FCC STATEMENT  
This device has been tested and found to comply with the limits for a Class B digital device  
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This device generates,  
uses, and can radiate radio frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation.  
If this device does cause harmful interference to radio or television reception, which can  
be determined by turning the device off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the device and receiver.  
- Connect the device into an outlet on a circuit different from that to which the receiver  
is connected.  
- Consult the dealer or an experienced radio/television technician for help.  
Notice: Shielded cables  
All connections to other computing devices must be made using shielded cables to  
maintain compliance with FCC regulations.  
NOTICE: PERIPHERAL DEVICES  
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with  
the Class B limits may be attached to this equipment. Operation with non-certified  
peripherals is likely to result in interference to radio and TV reception.  
102 - Regulations and safety notices  
   
Caution: Changes or modifications not expressly approved by the manufacturer could  
void the user's authority, which is granted by the Federal Communications Commission,  
to operate this computer.  
NOTICE FOR CANADA  
This Class B digital apparatus complies with Canadian ICES-003.  
Remarque à l'intention des utilisateurs canadiens  
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.  
COMPLIANT WITH RUSSIAN REGULATORY CERTIFICATION  
LCD PIXEL STATEMENT  
The LCD unit is produced with high-precision manufacturing techniques. Nevertheless,  
some pixels may occasionally misfire or appear as black or red dots. This has no effect  
on the recorded image and does not constitute a malfunction.  
RADIO DEVICE REGULATORY NOTICES  
Note: Below regulatory information is for models with wireless LAN and / or Bluetooth  
only.  
To prevent radio interference to the licensed service, this device is intended to be  
operated indoors.  
This product complies with the radio frequency and safety standards of any country or  
region in which it has been approved for wireless use. Depending on configurations, this  
product may or may not contain wireless radio devices (such as wireless LAN and/or  
Bluetooth modules). Below information is for products with such devices.  
Regulations and safety notices - 103  
Declaration of Conformity for EU countries  
Hereby, Acer, declares that this computer is in compliance with the essential requirements  
and other relevant provisions of Directive 1999/5/EC.  
Wireless operation channels for different domains  
N. America  
Japan  
2.412-2.462 GHz  
2.412-2.484 GHz  
2.412-2.472 GHz  
Ch01 through Ch11  
Ch01 through Ch14  
Ch01 through Ch13  
Europe ETSI  
France: Restricted wireless frequency bands  
Some areas of France have a restricted frequency band. The worst case maximum  
authorized power indoors is:  
- 10 mW for the entire 2.4 GHz band (2400 MHz - 2483.5 MHz)  
- 100 mW for frequencies between 2446.5 MHz and 2483.5 MHz  
Note: Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.  
There are few possibilities for outdoor use: On private property or on the private property  
of public persons, use is subject to a preliminary authorization procedure by the Ministry  
of Defense, with maximum authorized power of 100 mW in the 2446.5 - 2483.5 MHz band.  
Use outdoors on public property is not permitted.  
In the departments listed below, for the entire 2.4 GHz band:  
- Maximum authorized power indoors is 100 mW  
- Maximum authorized power outdoors is 10 mW  
104 - Regulations and safety notices  
Departments in which the use of the 2400 - 2483.5 MHz band is permitted with an EIRP  
of less than 100 mW indoors and less than 10 mW outdoors:  
01 Ain Orientales  
02 Aisne  
03 Allier  
05 Hautes Alpes  
08 Ardennes  
09 Ariege  
11 Aude  
12 Aveyron  
16 Charente  
24 Dordogne  
This requirement is likely to change over time, allowing you to use your wireless LAN card  
in more areas within France.  
Please check with ART for the latest information (www.art-telecom.fr).  
Note: Your WLAN Card transmits less than 100 mW, but more than 10 mW.  
Regulations and safety notices - 105  
List of national codes  
This equipment may be operated in the following countries:  
Country  
Austria  
Belgium  
Cyprus  
Czech Republic  
Denmark  
Estonia  
Finland  
France  
Germany  
Greece  
Hungary  
Ireland  
Italy  
Latvia  
Lithuania  
Luxembourg  
CANADA — LOW-POWER LICENSE-EXEMPT RADIO COMMUNICATION DEVICES (RSS-210)  
Exposure of humans to RF fields (RSS-102)  
The computer employs low gain integral antennas that do not emit RF field in excess of  
Health Canada limits for the general population; consult Safety Code 6, obtainable from  
Health Canada's website at www.hc-sc.gc.ca/rpb.  
106 - Regulations and safety notices  
This device complies with RSS210 of Industry Canada.  
This Class B digital apparatus complies with Canadian ICES-003, Issue 4, and RSS-210,  
No 4 (Dec 2000) and No 5 (Nov 2001).  
"To prevent radio interference to the licensed service, this device is intended to be  
operated indoors and away from windows to provide maximum shielding. Equipment (or  
its transmit antenna) that is installed outdoors is subject to licensing."  
Cet appareil numérique de la classe B est conforme à la norme NMB-003, No. 4, et CNR-  
210, No 4 (Dec 2000) et No 5 (Nov 2001).  
« Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une  
licence, il doit être utilisé a l'intérieur et devrait être placé loin des fenêtres afin de fournir  
un écran de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à  
l'extérieur, il doit faire l'objet d'une licence.  
Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use  
due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires  
this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce  
the potential for harmful interference to co-channel mobile satellite systems. High power  
radar is allocated as the primary user of the 5.25 to 5.35 GHz and 5.65 to 5.85-GHz  
bands. These radar stations can cause interference with and/or damage to this device.  
The maximum allowed antenna gain for use with this device is 6 dBi in order to comply  
with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85 GHz frequency range in point-  
to-point operation.  
Regulations and safety notices - 107  
The FCC RF safety requirement  
The radiated output power of the wireless LAN Mini PCI Card and Bluetooth card is far  
below the FCC radio frequency exposure limits. Nevertheless, the computer shall be used  
in such a manner that the potential for human contact during normal operation is  
minimized as follows:  
1. Users are requested to follow the RF safety instructions on wireless option devices  
that are included in the user's manual of each RF option device.  
Caution: To comply with FCC RF exposure  
compliance requirements, a separation  
distance of at least 20 cm (8 inches) must  
be maintained between the antenna for the  
integrated wireless LAN Mini PCI Card  
built in to the screen section and all  
persons.  
Note: The wireless Mini PCI adapter  
implements a transmission diversity function.  
The function does not emit radio frequencies  
simultaneously from both antennas. One of  
the antennas is selected automatically or  
manually (by users) to ensure good quality radiocommunication.  
1. This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz  
frequency range. FCC requires this product to be used indoors for the frequency  
range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel  
Mobile Satellite systems.  
2. High power radar is allocated as the primary user of the 5.25 to 5.35 GHz and 5.65 to  
5.85 GHz bands. These radar stations can cause interference with and/or damage  
this device.  
108 -  
3. An improper installation or unauthorized use may cause harmful interference to radio  
communications. Also any tampering of the internal antenna will void the FCC  
certification and your warranty.  
CANADA — LOW-POWER LICENSE-EXEMPT RADIO COMMUNICATION DEVICES (RSS-210)  
Exposure of humans to RF fields (RSS-102)  
The computer employs low gain integral antennas that do not emit RF field in excess of  
Health Canada limits for the general population; consult Safety Code 6, obtainable from  
Health Canada's website at www.hc-sc.gc.ca/rpb.  
This device complies with RSS210 of Industry Canada.  
This Class B digital apparatus complies with Canadian ICES-003, Issue 4, and RSS-210,  
No 4 (Dec 2000) and No 5 (Nov 2001).  
"To prevent radio interference to the licensed service, this device is intended to be  
operated indoors and away from windows to provide maximum shielding. Equipment (or  
its transmit antenna) that is installed outdoors is subject to licensing."  
Cet appareil numérique de la classe B est conforme à la norme NMB-003, No. 4, et CNR-  
210, No 4 (Dec 2000) et No 5 (Nov 2001).  
« Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une  
licence, il doit être utilisé a l'intérieur et devrait être placé loin des fenêtres afin de fournir  
un écran de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à  
l'extérieur, il doit faire l'objet d'une licence.  
Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use  
due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires  
this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce  
the potential for harmful interference to co-channel mobile satellite systems. High power  
radar is allocated as the primary user of the 5.25 to 5.35 GHz and 5.65 to 5.85-GHz  
bands. These radar stations can cause interference with and/or damage to this device.  
The maximum allowed antenna gain for use with this device is 6 dBi in order to comply  
with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85 GHz frequency range in point-  
to-point operation.  
Ver.: 01.01.02  
- 109  

Xerox Et 6124 User Manual
Summer Infant 02180a User Manual
Sears 47003 User Manual
Schumacher Se 112s User Manual
Minolta Bizhub C353 User Manual
D LINK DCS 6100LH User Manual
DIGI CONNECTCORE 8X SBC PRO User Manual
CRAFTSMAN 917.377210 User Manual
CRAFTSMAN 536.887251 User Manual
ASUS X550V User Manual