Parts Manual
Dual Stage Snow Thrower
Snowthrowers
Mfg. No.
Description
1024MD, B&S 9.5 Gross TP 24" Dual Stage Snowthrower
(2017)
1696614-01
Manual Part No. 1760684
Revision
-
Rev. Date:
7/5/2016
Table Of Contents
PRODUCT COMPONENTS
PAGES
Handles & Controls Group ...................................................................................................................................
Engine & Frame Group ........................................................................................................................................
Auger Housing Group ..........................................................................................................................................
Auger Drive Group ...............................................................................................................................................
Wheels & Tires Group .........................................................................................................................................
Decals Group .......................................................................................................................................................
Discharge Chute Group .......................................................................................................................................
Transaxle Drive Group .........................................................................................................................................
4
10
14
16
20
22
24
28
Torque Specification Chart ..................................................................... Inside Back Cover
Handles & Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
4
1760684
Handles & Controls Group
REF NO PART NO.
QTY. DESCRIPTION
0460
7
770081
-----
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
4
1
6
1
1
1
1
1
1
1
1
2
1
1
2
1
2
1
1
1
KIT, Lever, Speed (Incl. Ref. Nos. 7, 8, 9 & 13)
*KNOB (Included with Ref. No. 0460)
8
-----
*BOLT, Phillips Head (Included with Ref. No. 0460)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0460)
*LEVER, Control, Drive Speed (Included with Ref. No. 0460)
KIT, Lever, Discharge Chute (Incl. Ref. Nos. 7, 8, 9 & 10)
*KNOB (Included with Ref. No. 0470)
9
-----
13
-----
0470
7
707505
-----
8
-----
*BOLT, Phillips Head (Included with Ref. No. 0470)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0470)
*LEVER, Control, Discharge Chute (Included with Ref. No. 0470)
KIT, Knob, Lever (Incl. Ref. Nos. 7, 8 & 9)
9
-----
10
-----
0480
7
707504
-----
*KNOB (Included with Ref. No. 0480)
8
-----
*BOLT, Phillips Head (Included with Ref. No. 0480)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0480)
KIT, Dash (Incl. Ref. Nos. 12, 14, 16, 43, 46, 53, 54, 56, 301, 302, 312, 313 & 314)
*PANEL, Dash (Included with Ref. No. 0490)
9
-----
0490
12
770072
-----
14
-----
*SLEEVE, Rubber (Included with Ref. No. 0490)
16
-----
*WASHER, Flat (Included with Ref. No. 0490)
43
-----
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0490)
*BOLT, Square Neck, Cup Head (Included with Ref. No. 0490)
*BUCKLE, Lamp (Included with Ref. No. 0490)
46
-----
53
-----
54
-----
*LAMP (Included with Ref. No. 0490)
56
-----
*BOLT, Phillips Head (Included with Ref. No. 0490)
DECAL, Auger Control (Included with Ref. No. 0490)
DECAL, Traction Control (Included with Ref. No. 0490)
*DECAL, 1-6 Transmission Speed Control (Included with Ref. No. 0490)
*DECAL, Free Hand Operation (Included with Ref. No. 0490)
*DECAL, Chute Rotation (Included with Ref. No. 0490)
KIT, Hardware, Speed & Discharge (Incl. Ref. Nos. 18, 55, 75 & 76)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0500)
*SPRING (Included with Ref. No. 0500)
301
302
312
313
314
0500
18
1751429YP
1751430YP
-----
-----
-----
707507
-----
55
-----
75
-----
*WASHER, Flat (Included with Ref. No. 0500)
76
-----
*SCREW, Hex Head (Included with Ref. No. 0500)
KIT, Grip, Handle (Incl. Qty. 2 Ref. No. 84)
0510
84
770080
-----
Grip (Included with Ref. No. 0510)
0520
18
707509
-----
KIT, Right Hand Lever, Traction Drive (Incl. Ref. Nos. 18, 24, 40 & 81)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0520)
*PAD, Small Tensioning Plate (Included with Ref. No. 0520)
*LEVER, Traction Drive Engagement Lever (Included with Ref. No. 0520)
*SCREW, Hex Head (Included with Ref. No. 0520)
24
-----
40
-----
81
-----
Footnotes
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
5
1760684
Handles & Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
6
1760684
Handles & Controls Group
REF NO PART NO.
QTY. DESCRIPTION
0530
18
707508
-----
1
1
2
1
1
1
1
1
1
1
2
2
2
1
2
2
2
1
1
1
1
2
2
2
1
1
4
4
4
1
4
4
4
4
1
4
4
1
4
1
4
1
KIT, Left Hand Lever, Auger Drive (Incl. Ref. Nos. 18, 24, 81 & 83)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0530)
*PAD, Small Tensioning Plate (Included with Ref. No. 0530)
*SCREW, Hex Head (Included with Ref. No. 0530)
*LEVER, Auger Engagement (Included with Ref. No. 0530)
KIT, Bevel Gear, Chute Rotation (Incl. Ref. Nos. 68, 68 & 77)
*GEAR, Bevel (Included with Ref. No. 0540)
*GEAR, Bevel, Turning (Included with Ref. No. 0540)
*PIN, Spring (Included with Ref. No. 0540)
24
-----
81
-----
83
-----
0540
67
770070
-----
68
-----
77
-----
0550
69
707513
-----
KIT, Wing Knob, Handle (Incl. Ref. Nos. 69, 70 & 71)
*KNOB, Handle (Included with Ref. No. 0550)
*WASHER (Included with Ref. No. 0550)
70
-----
71
-----
*BOLT (Included with Ref. No. 0550)
0560
69
770075
-----
KIT, Upper Handle, Left (Incl. Ref. Nos. 69, 70, 71, 82 & 84)
*KNOB, Handle (Included with Ref. No. 0560)
*WASHER (Included with Ref. No. 0560)
70
-----
71
-----
*BOLT (Included with Ref. No. 0560)
82
-----
*HANDLE, Upper, Left (Included with Ref. No. 0560)
*GRIP (Included with Ref. No. 0560)
84
-----
0570
52
770076
-----
KIT, Upper Handle, Right (Incl. Ref. Nos. 52, 69, 70, 71, & 84)
*HANDLE, Upper, Right (Included with Ref. No. 0570)
*KNOB, Handle (Included with Ref. No. 0570)
*WASHER (Included with Ref. No. 0570)
69
-----
70
-----
71
-----
*BOLT (Included with Ref. No. 0570)
84
-----
*GRIP (Included with Ref. No. 0570)
0590
32
707517
-----
KIT, Lower Handle Hardware (Included with Ref. No. 0570)
*WASHER (Incl. Ref. Nos. 32, 74 & 75)
74
-----
*SCREW, Hex Head (Included with Ref. No. 0590)
*WASHER, Flat (Included with Ref. No. 0590)
KIT, Lower Handle (Incl. Ref. Nos. 32, 69, 70, 71, 72, 74 & 75)
*WASHER (Included with Ref. No. 0600)
75
-----
0600
32
707518
-----
69
-----
*KNOB, Handle (Included with Ref. No. 0600)
*WASHER (Included with Ref. No. 0600)
70
-----
71
-----
*BOLT (Included with Ref. No. 0600)
72
-----
*HANDLE, Lower (Included with Ref. No. 0600)
*SCREW, Hex Head (Included with Ref. No. 0600)
*WASHER, Flat (Included with Ref. No. 0600)
KIT, Headlight (Incl. Ref. Nos. 32, 69, 70, 71, 72, 74 & 75)
*BUCKLE, Lamp (Included with Ref. No. 0610)
*LAMP (Included with Ref. No. 0610)
74
-----
75
-----
0610
53
707519
-----
54
-----
56
-----
*BOLT, Phillips Head (Included with Ref. No. 0610)
SPRING, Handle
41
707877
Footnotes
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
7
1760684
Handles & Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
8
1760684
Handles & Controls Group
REF NO PART NO.
QTY. DESCRIPTION
0620
58
707521
-----
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
4
4
4
1
KIT, Free Hand Control Assembly (Incl. Ref. Nos. 58, 59 & 60)
*WASHER, Spring (Included with Ref. No. 0620)
*SELF-LOCK, Assembly (Included with Ref. No. 0620)
*SCREW, Hex Head (Included with Ref. No. 0620)
KIT, Cable, Auger Clutch (Incl. Ref. Nos. 78, 79 & 80)
*ROD, Steel (Included with Ref. No. 0630)
*NUT, Copper (Included with Ref. No. 0630)
*CABLE, Auger (Included with Ref. No. 0630)
KIT, Cable, Hardware (Incl. Ref. Nos. 78 & 79)
*ROD, Steel (Included with Ref. No. 0631)
*NUT, Copper (Included with Ref. No. 0631)
KIT, Cable, Traction Drive (Incl. Ref. Nos. 39, 78 & 79)
*ROD, Steel (Included with Ref. No. 0640)
*ROD, Steel (Included with Ref. No. 0640)
*NUT, Copper (Included with Ref. No. 0640)
KIT, Transaction Drive Rod (Incl. Ref. Nos. 101, 102, 103, 104, 105, 106 & 107)
*BOLT (Included with Ref. No. 0650)
59
-----
60
-----
0630
78
707760
-----
79
-----
80
-----
0631
78
709758
-----
79
-----
0640
39
707761
-----
78
-----
79
-----
0650
101
102
103
104
105
106
107
57
707526
-----
-----
*ROD, Traction Drive (Included with Ref. No. 0650)
*SCREW, Hex Head (Included with Ref. No. 0650)
*ROD, Regulating Sleeve, Drive (Included with Ref. No. 0650)
*NUT (Included with Ref. No. 0650)
-----
-----
-----
-----
*ROD, Traction Drive (Included with Ref. No. 0650)
*SPRING, Regulating (Included with Ref. No. 0650)
*PANEL, Steel
-----
-----
18
-----
*NUT, Hex Head Lock, Non-metal
19
-----
*WASHER, Flat
42
-----
*BOLT, Square Neck Cup Head
204
707637
HARNESS, Wiring
Footnotes
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
9
1760684
Engine & Frame Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
10
1760684
Engine & Frame Group
REF NO PART NO.
QTY. DESCRIPTION
20
18
13A137-0004-F1
1
4
4
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
6
1
1
3
1
1
1
1
1
1
1
1
1
1
**ENGINE, 9.5 Gross TP Briggs & Stratton (Engine Model: 13A137-0004-F1)
*NUT, Hex Head Lock, Non-metal
-----
19
-----
*WASHER, Flat
26
-----
*SCREW, Hex Head
0130
15
707567
-----
KIT, Belt Cover (Incl. Ref. Nos. 15, 16 & 17)
*SCREW, Hex Head (Included with Ref. No. 0130)
*WASHER, Flat (Included with Ref. No. 0130)
*COVER, Belt (Included with Ref. No. 0130)
16
-----
17
-----
0140
18
707568
-----
KIT, Idler Pulley, Traction Drive (Incl. Ref. Nos. 18, 19, 21, 22, 23, 24, 25, 26, 27 & 28)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0140)
*WASHER, Flat (Included with Ref. No. 0140)
*SCREW, Hex Head (Included with Ref. No. 0140)
*SPRING (Included with Ref. No. 0140)
19
-----
21
-----
22
-----
23
-----
*PLATE, Tensioning, Small (Included with Ref. No. 0140)
*PAD, Tensioning Plate, Small (Included with Ref. No. 0140)
*PAD, Tensioning Wheel, Small (Included with Ref. No. 0140)
*SCREW, Hex Head (Included with Ref. No. 0140)
*WHEEL, Tensioning Assembly, Small (Included with Ref. No. 0140)
*Washer (Included with Ref. No. 0140)
24
-----
25
-----
26
-----
27
-----
28
-----
30
707584
707585
770141
-----
BELT, Auger Drive
36
BELT, Traction Drive
0150
29
KIT, Engine Pulley (Incl. Ref. Nos. 29, 31, 32, 33, 35 & 37)
*PULLEY, Impeller Drive (Included with Ref. No. 0150)
*WASHER, Flat (Included with Ref. No. 0150)
*WASHER, Spring (Included with Ref. No. 0150)
*SCREW, Hex Head (Included with Ref. No. 0150)
*RING, Retainer, Synch-pulley (Included with Ref. No. 0150)
*SYNCH-PULLEY (Included with Ref. No. 0150)
KIT, Bottom Cover (Incl. Ref. Nos. 109 & 174)
*SCREW, Hex Head (Included with Ref. No. 0160)
*COVER, Motor Box, Lower (Included with Ref. No. 0160)
KIT, Bearing Hardware, Auger Pulley (Incl. Ref. Nos. 18, 124 & 125)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0170)
*COVER, Round Bottom (Included with Ref. No. 0170)
*BEARING, Ball (Included with Ref. No. 0170)
*BOX, Frame
31
-----
32
-----
33
-----
35
-----
37
-----
0160
109
174
0170
18
707542
-----
-----
707548
-----
124
125
114
0180
18
-----
-----
-----
707743
-----
KIT, Auger Pulley (Incl. Ref. Nos. 18, 32, 66, 74, 121, 122 & 123)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0180)
*WASHER, Spring (Included with Ref. No. 0180)
*BAFFLE, Belt (Included with Ref. No. 0180)
32
-----
66
-----
74
-----
*SCREW, Hex Head (Included with Ref. No. 0180)
*WASHER, Flat (Included with Ref. No. 0180)
*PULLEY, Drive (Included with Ref. No. 0180)
121
122
Footnotes
-----
-----
Note** To verify your specific engine model, please reference the ID Tag located on your engine. See your local Briggs &
Stratton distributor for parts and service.
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
11
1760684
Engine & Frame Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
12
1760684
Engine & Frame Group
REF NO PART NO.
QTY. DESCRIPTION
123
0190
18
-----
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
*KEY, Flat (Included with Ref. No. 0180)
707547
-----
KIT, Belt Guide, Auger (Incl. Ref. Nos. 18 & 66)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0190)
*BAFFLE, Belt (Included with Ref. No. 0190)
66
-----
0350
93
707565
-----
KIT, Hardware, Idler Bracket (Incl. Ref. Nos. 93, 99 & 148)
*WASHER, Flat (Included with Ref. No. 0350)
99
-----
*SCREW, Hex Head (Included with Ref. No. 0350)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0350)
PLATE, Large Tensioning
148
94
-----
709965
707654
-----
0360
18
KIT, Spring, Idler Pulley (Incl. Ref. Nos.18 & 100)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0360)
*SPRING (Included with Ref. No. 0360)
100
0370
18
-----
707566
-----
KIT, Idler Pulley, Tension Plate (Incl. Ref. Nos. 18, 28, 95, 96 & 98)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0370)
*WASHER (Included with Ref. No. 0370)
28
-----
95
-----
*SLEEVE, Washer (Included with Ref. No. 0370)
*WHEEL, Large Tensioning (Included with Ref. No. 0370)
*SCREW, Hex Head (Included with Ref. No. 0370)
96
-----
98
-----
Footnotes
Note** To verify your specific engine model, please reference the ID Tag located on your engine. See your local Briggs &
Stratton distributor for parts and service.
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
13
1760684
Auger Housing Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
14
1760684
Auger Housing Group
REF NO PART NO.
QTY. DESCRIPTION
169
0200
18
-----
*HOUSING, Auger, 24"
707550
-----
1
4
4
4
2
1
6
6
1
6
1
1
1
KIT, Skid Shoe (Incl. Ref. Nos. 18, 75, 172 & 173)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0200)
*WASHER, Flat (Included with Ref. No. 0200)
75
-----
172
173
0210
18
-----
*BOLT, Square Neck, Cup Head (Included with Ref. No. 0200)
*SHOE, Skid (Included with Ref. No. 0200)
-----
707762
-----
KIT, Scraper Bar (Incl. Ref. Nos. 18, 75, 170 & 171)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0210)
*WASHER, Flat (Included with Ref. No. 0210)
75
-----
170
171
0220
167
168
-----
*BAR, Scrapper, 24" Housing (Included with Ref. No. 0210)
*BOLT, Square Neck, Cup Head (Included with Ref. No. 0210)
KIT, Cleanout Brush Stick (Incl. Ref. Nos. 167 & 168)
*STICK, Cleanout (Included with Ref. No. 0220)
*BASE, Cleanout Stick (Included with Ref. No. 0220)
-----
707549
-----
-----
Footnotes
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
15
1760684
Auger Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
16
1760684
Auger Drive Group
REF NO PART NO.
QTY. DESCRIPTION
0040
175
176
177
178
0050
18
707553
-----
2
3
1
1
1
1
2
2
2
2
1
1
2
2
1
KIT, Mounting Plate, Auger Housing (Incl. Ref. Nos. 175, 176, 177 & 178)
*SCREW, Hex Head (Included with Ref. No. 0040)
*BEARING, Nylon (Included with Ref. No. 0040)
*BASE, Auger (Included with Ref. No. 0040)
-----
-----
-----
*PAD, Auger (Included with Ref. No. 0040)
707744
-----
KIT, Auger Assembly, Left (Incl. Ref. Nos. 18, 179, 180, 198 & 200)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0050)
*WASHER, Flat (Included with Ref. No. 0050)
179
180
198
200
0060
18
-----
-----
*SLEEVE, Output Shaft 24-2 (Included with Ref. No. 0050)
*BOLT, Auger Shear (Included with Ref. No. 0050)
*AUGER, Left (Included with Ref. No. 0050)
-----
-----
707555
-----
Kit, Shear Pin, Auger (Incl. Ref. Nos. 18 & 198)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0060)
*BOLT, Auger Shear (Included with Ref. No. 0060)
198
0070
-----
707745
KIT, Gear Box, Auger (Incl. Ref. Nos. 18, 75, 58, 134, 150, 182, 183, 185, 186, 187,
188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 199, 201 & 205)
18
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
707558
-----
-----
-----
2
2
7
7
2
1
1
2
1
1
1
1
1
1
1
1
2
1
2
6
1
1
1
1
1
1
2
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0070)
*WASHER, Flat (Included with Ref. No. 0070)
*WASHER, Spring (Included with Ref. No. 0070)
*WASHER, Flat (Included with Ref. No. 0070)
*KEY, Woodruff (Included with Ref. No. 0070)
*NIPPLE, Oil (Included with Ref. No. 0070)
75
58
134
150
182
183
185
186
187
188
189
190
191
192
193
194
195
196
197
199
201
205
0080
182
183
196
*GASKET, Corrugated (Included with Ref. No. 0070)
*SCREW, Fixed, Impeller (Included with Ref. No. 0070)
*SHAFT, Worm (Included with Ref. No. 0070)
*BEARING, Deep Groove Ball (Included with Ref. No. 0070)
*SPACER (Included with Ref. No. 0070)
*BEARING, Single Thrust Ball (Included with Ref. No. 0070)
*SEAL, Oil (Included with Ref. No. 0070)
*BEARING, Deep Groove Ball (Included with Ref. No. 0070)
*BOX, Gear, Right (Included with Ref. No. 0070)
*GEAR, Worm (Included with Ref. No. 0070)
*SLEEVE, Output Shaft (Included with Ref. No. 0070)
*BOX, Gear, Left (Included with Ref. No. 0070)
*SEAL, Oil (Included with Ref. No. 0070)
*SCREW, Hex Head (Included with Ref. No. 0070)
*SHAFT, Auger (Included with Ref. No. 0070)
*BOLT, Phillips Head (Included with Ref. No. 0070)
*SCREW, Hex Head (Included with Ref. No. 0070)
KIT, Seal, Gear Box (Incl. Ref. Nos. 150, 182, 183, 190 & 196)
*NIPPLE, Oil (Included with Ref. No. 0080)
*GASKET, Corrugated (Included with Ref. No. 0080)
*SEAL, Oil (Included with Ref. No. 0080)
Footnotes
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
17
1760684
Auger Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
18
1760684
Auger Drive Group
REF NO PART NO.
QTY. DESCRIPTION
KIT, Auger Assembly, Right (Incl. Ref. Nos. 18, 179, 180, 181 & 198)
0090
18
707763
-----
1
2
2
2
1
2
1
2
2
1
2
2
1
2
1
2
2
2
1
2
2
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0090)
*WASHER, Flat (Included with Ref. No. 0090)
179
180
181
198
0100
179
180
0110
43
-----
-----
*SLEEVE, Output Shaft 24-2 (Included with Ref. No. 0090)
*AUGER, Right (Included with Ref. No. 0090)
-----
-----
*BOLT, Auger Shear (Included with Ref. No. 0090)
KIT, Auger Shaft Hardware (Incl. Ref. Nos. 179 & 180)
*WASHER, Flat (Included with Ref. No. 0100)
707554
-----
-----
*SLEEVE, Output Shaft 24-2 (Included with Ref. No. 0100)
KIT, Impeller Assembly (Incl. Ref. Nos. 43, 134, 184, & 185)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0110)
*WASHER, Flat (Included with Ref. No. 0110)
707560
-----
134
184
185
0120
43
-----
-----
*BLADE, Impeller (Included with Ref. No. 0110)
-----
*SCREW, Fixed, Impeller (Included with Ref. No. 0110)
KIT,Shear Pin, Impeller (Incl. Ref. Nos. 18, 134 & 185)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0120)
*WASHER, Flat (Included with Ref. No. 0120)
707561
-----
134
185
0680
176
178
-----
-----
*SCREW, Fixed,Impeller (Included with Ref. No. 0120)
KIT, Bearing, Mounting Plate (Incl. Ref. Nos. 176 & 178)
*BEARING, Nylong (Included with Ref. No. 0680)
*PAD, Auger (Included with Ref. No. 0680)
707552
-----
-----
Footnotes
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
19
1760684
Wheels & Tires Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
20
1760684
Wheels & Tires Group
REF NO PART NO.
QTY. DESCRIPTION
0010
34
707534
-----
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
2
1
2
1
1
1
1
KIT, Wheel & Tire, Right (Incl. Ref. Nos. 34, 44, 97 & 156)
*TIRE, Assembly, Right (Included with Ref. No. 0010)
*WASHER, Flat (Included with Ref. No. 0010)
44
-----
97
-----
*GASKET, Corrugated (Included with Ref. No. 0010)
*PIN, Klik (Included with Ref. No. 0010)
156
0020
44
-----
707533
-----
KIT, Wheel & Tire, Left (Incl. Ref. Nos. 44, 97, 155 & 156)
*WASHER, Flat (Included with Ref. No. 0020)
97
-----
*GASKET, Corrugated (Included with Ref. No. 0020)
*TIRE, Assembly, Left (Included with Ref. No. 0020)
*PIN, Klik (Included with Ref. No. 0020)
155
156
0030
44
-----
709530
770078
-----
KIT, Axle & Sprocket (Incl. Ref. Nos. 44, 97, 149, 150, 151, 152, 153 & 154)
*WASHER, Flat (Included with Ref. No. 0030)
97
-----
*GASKET, Corrugated (Included with Ref. No. 0030)
*C-CLIP, Shaft (Included with Ref. No. 0030 & 0670)
*KEY, Woodruff (Included with Ref. No. 0030 & 0670)
*PIN, Spring (Included with Ref. No. 0030 & 0670)
*SHAFT, Drive Wheel (Included with Ref. No. 0030)
*GEAR,Drive (Included with Ref. No. 0030)
149
150
151
152
153
154
0660
154
0670
149
150
151
-----
-----
-----
-----
-----
-----
*SLEEVE, Axle (Included with Ref. No. 0030 & 0660)
KIT, Axle Sleeve (Incl. Ref. Nos. 154)
707532
-----
*SLEEVE, Axle (Included with Ref. No. 0030 & 0660)
KIT, Bearing Hardware, Axle (Incl. Ref. Nos. 149, 150, & 151)
*C-CLIP, Shaft (Included with Ref. No. 0030 & 0670)
*KEY, Woodruff (Included with Ref. No. 0030 & 0670)
*PIN, Spring (Included with Ref. No. 0030 & 0670)
707530
-----
-----
-----
Footnotes
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
21
1760684
Decals Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
22
1760684
Decals Group
REF NO PART NO.
QTY. DESCRIPTION
1
770374
1
KIT-DECAL, Briggs 1024MD (Incl. Ref. No. 301, 302, 303, 304, 308, 309, 312, 313 &
314)
2
770378
1
KIT-DECAL, Briggs 1024MD, Export (Incl. Ref. No. 301, 302, 303, 308, 312, 313 &
314, 324 & 329)
301
302
303
304
308
309
312
-----
1
1
1
1
1
1
1
*DECAL, Auger Control (Included with Ref. No. 1 & 2) (Included with Dash Kit)
*DECAL, Traction Control (Included with Ref. No. 1 & 2) (Included with Dash Kit)
*DECAL, Control Panel, Briggs & Stratton (Included with Ref. No. 1 & 2)
DECAL, Danger Chute (Included with Ref. No. 1)
-----
-----
1737865YP
-----
*DECAL, Auger Housing, 1024MD (Included with Ref. No. 1 & 2)
DECAL, Danger Foot (Included with Ref. No. 1)
1737866YP
-----
*DECAL, 1-6 Transmission Speed Control (Included with Ref. No. 1 & 2) (Included
with Dash Kit)
313
314
324
329
-----
1
1
1
1
*DECAL, Free Hand Operation (Included with Ref. No. 1 & 2) (Included with Dash Kit)
*DECAL, Chute Rotation (Included with Ref. No. 1 & 2) (Included with Dash Kit)
DECAL, Chute Warning, Export (Included with Ref. No. 2)
-----
1727207SM
1737867YP
DECAL, Danger Auger Icons, Export (Included with Ref. No. 2)
Footnotes
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
23
1760684
Discharge Chute Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
24
1760684
Discharge Chute Group
REF NO PART NO.
QTY. DESCRIPTION
0330
1
707503
-----
1
1
1
1
2
1
1
1
1
1
1
1
2
1
2
2
1
1
1
KIT, Chute Rotation (Incl. Ref. Nos. 1, 2, 3, 4, 5, 6 & 61)
*COVER, Lever Knob, Chute Rotater (Included with Ref. No. 0330)
*C-Clip, Shaft (Included with Ref. No. 0330)
2
-----
3
-----
*KNOB, Lever, Chute Rotater (Included with Ref. No. 0330)
*WASHER, Flat (Included with Ref. No. 0330)
4
-----
5
-----
*LEVER, Chute Rotater (Included with Ref. No. 0330)
*SLEEVE, Rubber (Included with Ref. No. 0330)
6
-----
61
0340
1
-----
*SLEEVE, Damping, Chute Rotater Lever (Included with Ref. No. 0330)
KIT, Chute Knob (Incl. Ref. Nos. 1, 2, 3 & 4)
707502
-----
*COVER, Lever Knob, Chute Rotater (Included with Ref. No. 0340)
*C-CLIP, Shaft (Included with Ref. No. 0340)
2
-----
3
-----
*KNOB, Lever, Chute Rotater (Included with Ref. No. 0340)
*WASHER, Flat (Included with Ref. No. 0340)
4
-----
0380
15
43
202
203
0390
707570
-----
KIT, Chute Guard (Incl. Ref. Nos. 15, 43, 202 & 203)(CE/Export Only)
*SCREW, Hex-Head (Included with Ref. No. 0380)(CE/Export Only)
*Lock Nut, Hex Head, non-metal (Included with Ref. No. 0380)(CE/Export Only)
*Chute Guard (Included with Ref. No. 0380)(CE/Export Only)
*Spring (Included with Ref. No. 0380)(CE/Export ONly)
-----
-----
-----
707747
KIT, Chute Assembly (Domestic Only) (Incl. Ref. Nos. 4, 16, 43, 45, 85, 86, 87, 88, 89,
90, 91 & 92)
0390
707748
1
KIT, Chute Assembly (CE/Export Only) (Incl. Ref. Nos. 4, 16, 43, 45, 85, 86, 87, 88,
89, 90, 91 & 92)
16
-----
2
2
1
1
1
1
2
1
1
2
1
1
1
1
2
1
1
1
1
1
1
*WASHER, Flat (Included with Ref. No. 0390)
43
-----
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0390)
*SCREW, Non-standard (Included with Ref. No. 0390)
*SPRING, Tensioned, Chute Deflector (Included with Ref. No. 0390)
*DEFLECTOR, Chute (Included with Ref. No. 0390)
*PAD, Chute Rubber (Included with Ref. No. 0390)
*SCREW, Hex Head (Included with Ref. No. 0390)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0390)
*CHUTE (Included with Ref. No. 0390)
45
-----
85
-----
86
-----
87
-----
88
-----
89
-----
90
-----
91
-----
*RIVET, Core (Included with Ref. No. 0390)
92
-----
*RING, Chute (Included with Ref. No. 0390)
304
304
0400
16
1737865YP
1727207SM
707563
-----
*DECAL, Danger Chute (Included with Ref. No. 0390)
*DECAL, Danger Chute, Export (Included with Ref. No. 0390)
KIT, Spring, Chute (Incl. Ref. Nos. 16, 43, 45 & 85)
*WASHER, Flat (Included with Ref. No. 0400)
43
-----
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0400)
*SCREW, Non-standard (Included with Ref. No. 0400)
*SPRING, Tensioned, Chute Deflector (Included with Ref. No. 0400)
KIT, Worm Gear Hardware, Chute (Incl. Ref. Nos. 49, 126, 130, 132 & 133)
*SPRING, Splitpin (Included with Ref. No. 0410)
45
-----
85
-----
0410
49
707543
-----
130
-----
*BRACKET, Worm (Included with Ref. No. 0410)
Footnotes
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
25
1760684
Discharge Chute Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
26
1760684
Discharge Chute Group
REF NO PART NO.
QTY. DESCRIPTION
0420
126
127
129
131
0430
18
707544
-----
1
4
1
1
1
1
2
2
2
1
1
1
2
4
1
1
1
1
2
1
1
1
2
1
1
1
1
1
1
1
KIT, Cover, Chute Rotation (Incl. Ref. Nos. 126, 127, 129 & 131)
*NUT (Included with Ref. No. 0420)
-----
*HEAD, Chute Rotation (Included with Ref. No. 0420)
*SELF-LOCK, Assembly, Chute Deflector (Included with Ref. No. 0420)
*SCREW, Hex Head (Included with Ref. No. 0420)
KIT, Bracket, Chute Rotation (Incl. Ref. Nos. 18, 19, 42 & 128)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0430)
*WASHER, Flat (Included with Ref. No. 0430)
-----
-----
707545
-----
19
-----
42
-----
*BOLT, Square Neck, Cup Head (Included with Ref. No. 0430)
*BRACKET, Chute Rotatation (Included with Ref. No. 0430)
KIT, Chute Rotaion Rod (Incl. Ref. Nos. 47, 48, 49, 50, 51 62, 63 & 64)
*ROD, Hex, Chute Rotation (Included with Ref. No. 0440)
*JOINT, Cardan (Included with Ref. No. 0440)
128
0440
47
-----
707525
-----
48
-----
49
-----
*SPRING, Splitpin (Included with Ref. No. 0440)
*ROD, Rotation, Chute (Included with Ref. No. 0440)
*ROD, Rotation, Chute (Included with Ref. No. 0440)
*C-CLIP, Shaft (Included with Ref. No. 0440)
50
-----
51
-----
62
-----
63
-----
*WASHER, Flat (Included with Ref. No. 0440)
64
-----
*SCREW, Hex Head (Included with Ref. No. 0440)
*SEAT, Bevel Gear
65
-----
0450
48
707524
-----
KIT, Cardan Joint (Incl. Ref. Nos. 48 & 49)
*JOINT, Cardan (Included with Ref. No. 0450)
49
-----
*SPRING, Splitpin (Included with Ref. No. 0450)
KIT, Cable-Chute Deflector (Incl. Ref. Nos. 38 & 73)
*HOOK, Cable (Included with Ref. No. 0580)
0580
38
707516
-----
73
-----
*CABLE, Chute Deflector (Included with Ref. No. 0580)
KIT, Hardware, Chute Rotation (Incl. Ref. Nos. 18, 19 & 42)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0690)
*WASHER, Flat (Included with Ref. No. 0690)
0690
18
709757
-----
19
-----
42
-----
*BOLT, Square Neck, Cup Head (Included with Ref. No. 0690)
Footnotes
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
27
1760684
Transaxle Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
28
1760684
Transaxle Drive Group
REF NO PART NO.
QTY. DESCRIPTION
0230
32
707535
-----
1
1
1
1
1
1
1
1
2
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
1
1
2
2
1
1
1
1
1
1
1
1
1
2
KIT, Friction Wheel & Shaft (Incl. Ref. Nos. 32, 74, 75, 148, 157, 158, 159 & 160)
*WASHER, Spring (Included with Ref. No. 0230)
*SCREW, Hex Head (Included with Ref. No. 0230)
*WASHER, Flat (Included with Ref. No. 0230)
74
-----
75
-----
148
157
158
159
160
0240
160
0250
145
146
148
0260
136
137
138
139
140
0270
136
138
139
140
0280
109
111
112
113
134
135
141
0290
111
112
113
0300
19
-----
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0230)
*WASHER, Flat (Included with Ref. No. 0230)
-----
-----
*SHAFT, Hexagonal Gear (Included with Ref. No. 0230)
WHEEL, Friction Assembly (Included with Ref. No. 0230)
*BEARING, Ball, Deep Groove (Included with Ref. No. 0230)
KIT, Bearing, Friction Wheel & Shaft (Incl. Qty. 2 Ref. No. 160)
*BEARING, Ball, Deep Groove (Included with Ref. No. 0240)
KIT, Bearing, Swinging Plate (Incl. Ref. Nos. 145, 146 & 148)
*SHAFT, Drive Disk (Included with Ref. No. 0250)
*BEARING, Ball, Deep Groove (Included with Ref. No. 0250)
*NUT, Hex Head Lock, Non-metal (Included with Ref. No. 0250)
KIT, Swinging Plate (Incl. Ref. Nos. 136, 137, 138, 139 & 140)
*SPRING (Included with Ref. No. 0260)
708080
-----
707536
-----
707539
-----
-----
-----
707540
-----
-----
*PLATE, Swinging (Included with Ref. No. 0260)
*WASHER, Flat (Included with Ref. No. 0260)
-----
-----
*SPLITPIN (Included with Ref. No. 0260)
-----
*SLEEVE (Included with Ref. No. 0260)
707538
-----
KIT, Spring, Swinging Plate (Incl. Ref. Nos. 136, 138, 139 & 140)
*SPRING (Included with Ref. No. 0270)
-----
*WASHER, Flat (Included with Ref. No. 0270)
-----
*SPLITPIN (Included with Ref. No. 0270)
-----
*SLEEVE (Included with Ref. No. 0270)
770079
-----
KIT, Belt Guide (Incl. Ref. Nos. 109, 111, 112, 113, 134, 135 & 141)
*SCREW, Hex Head (Included with Ref. No. 0280)
*SCREW, Flange, Hex Head (Included with Ref. No. 0280)
*PULLEY, Cable (Included with Ref. No. 0280)
-----
-----
-----
*BOLT (Included with Ref. No. 0280)
-----
*WASHER, Flat (Included with Ref. No. 0280)
-----
*SCREW, Hex Head (Included with Ref. No. 0280)
*PLATE, Belt Pressing (Included with Ref. No. 0280)
KIT, Pulley, Cable (Incl. Ref. Nos. 111, 112 &113)
*SCREW, Flange, Hex Head (Included with Ref. No. 0290)
*PULLEY, Cable (Included with Ref. No. 0290)
-----
707541
-----
-----
-----
*BOLT (Included with Ref. No. 0290)
707527
-----
KIT, Shift Rod (Incl. Ref. Nos. 19, 115, 116, 117, 118, 119 & 120)
*WASHER, Flat (Included with Ref. No. 0300)
115
116
117
Footnotes
-----
*ARM, Shift Fork (Included with Ref. No. 0300)
-----
*BASE, Shift Fork (Included with Ref. No. 0300)
*SCREW, Hex Head (Included with Ref. No. 0300)
-----
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
29
1760684
Transaxle Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
30
1760684
Transaxle Drive Group
REF NO PART NO.
QTY. DESCRIPTION
118
119
120
0310
108
109
111
112
113
0320
109
110
111
112
113
114
-----
1
1
1
1
1
2
1
1
1
1
2
1
1
1
1
1
*SPRING, Regulating (Included with Ref. No. 0300)
*PIN, Spring (Included with Ref. No. 0300)
-----
-----
*FORK, Shift (Included with Ref. No. 0300)
707528
-----
KIT, Cable Base, Auger Drive (Incl. Ref. Nos. 108, 109, 111, 112 & 113)
*BASE, Cable (Included with Ref. No. 0310)
-----
*SCREW, Hex Head (Included with Ref. No. 0310)
*SCREW, Flange, Hex Head (Included with Ref. No. 0310)
*PULLEY, Cable (Included with Ref. No. 0310)
*BOLT (Included with Ref. No. 0310)
-----
-----
-----
707529
-----
KIT, Cable Base, Traction Drive (Incl. Ref. Nos. 109, 110, 111, 112 & 113)
*SCREW, Hex Head (Included with Ref. No. 0320)
*PULLEY, Mounting Plate (Included with Ref. No. 0320)
*SCREW, Flange, Hex Head (Included with Ref. No. 0320)
*PULLEY, Cable (Included with Ref. No. 0320)
*BOLT (Included with Ref. No. 0320)
-----
-----
-----
-----
-----
*BOX, Frame
Footnotes
Note:* Not a serviceable part.
The above parts group applies to the following Mfg. Nos.:
1696614-01 - 1024MD
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
31
1760684
Hardware Identification & Torque Specifications
Torque Specification Chart
FOR STANDARD METRIC MACHINE HARDWARE (Tolerance 20%)
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance 20%)
No
Marks
Property
Class
Hardware
Grade
5.6
8.8
10.9
12.9
SAE Grade 2
SAE Grade 5
in/lbs
SAE Grade 8
in/lbs
Class 5.6
Class 10.9
Class 8.8
Class 12.9
Size Of
in/lbs
Hardware ft/lbs
in/lbs
ft/lbs Nm.
in/lbs
in/lbs
ft/lbs Nm. ft/lbs
in/lbs
Nm. ft/lbs
Size Of
Hardware
Nm.
2.1
2.3
3.1
3.5
7.6
ft/lbs
Nm.
ft/lbs
Nm.
Nm.
.56
M3
M4
M5
M6
M7
M8
M10
M12
M14
M16
M18
M20
M22
M24
M27
M30
M33
M36
M39
13.44 1.28 19.2
30.72 2.90 43.44
60.96 5.75 5.97
1.80 22.92 2.15
4.10 52.56 4.95
9.7
8-32
8-36
19
20
27
31
66
76
11
12
20
23
30
35
50
55
65
30
31
43
49
8
10
17
19
30
35
50
55
3.4
3.5
4.9
41
43
60
4.6
4.9
6.8
5.88
1.28
13.44
26.4 2.50
8.10
14
7.15
12.1
19.9
29
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
4.3
7.1
10.5
21
36
16.5
27
40
44.64
5.2
7.7
15
7.3
10.3
5.5
68
7.7
9.9
12.1 16.5 16.9
23
34
67
10.9
13.6
23.1
25.8
40.8
47.6
68.0
74.8
12
16.3
25
50
17.7
35
61
24
48
8.6
14
19.0
59
81
15.0
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
25
34.0
83 86.2
117
185
285
390
550
745
960
103
162
250
346
486
656
140
220
340
470
660
890
29
34.0
26
101
147
202
290
390
497
733
132
136
210
287
405
559
708
45
61.2
42
58
200
275
390
530
375
50
68.0
64
88
89
121
70
95.2
126
169
217
320
435
590
759
80
108.8
149.6
163.2
204.0
231.2
299.2
326.4
525.0
571.2
816.0
897.6
171
230
295
435
590
800
75 102.0
90 122.4
110 149.6
120 163.2
150 204.0
180 244.8
260 353.6
300 408.0
400 544.0
440 598.4
580 788.8
110
120
150
170
220
240
386
420
600
660
840 1140
1239 1680
1681 2280
2278 3090
2935 3980
995 1032 1400
995 1350 1401 1900
75 102.0
90 122.4
100 136
160 217.6
180 244.8
140 190.4
155 210.8
220 299.2
240 326.4
1902 2580
2441 3310
1349 1830
1030 1740
2360
5150
3798
1340 2249 3050 3163 4290
988
The guides and ruler furnished below are designed to
help you select the appropriate hardware.
7/8-14
1-8
1-12
900 1,244.0
640 870.4 1,000 1,360.0
20
40
60
80
0
10
30
50
70
90
100
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
Body
Diameter
Body Length
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Nut, M8
Screw, M8- 1.25 x 25
Distance between
Thread
Diameter (mm)
Thread
Body
Length (mm)
threads (mm)
Diameter (mm)
Body
Body
Length (in)
Threads
per inch
Inside Threads
Diameter (in) per inch
Diameter
Screw, 1/2- 16 x 2
Nut, 1/2-16
Common Hardware Types
3
0
1
2
4
1/2
1/2
1/2
1/2
1/4
3/4
1/4
3/4
1/4
3/4
1/4
3/4
Hex Head Capscrew
Washer
Standard Hardware Sizing
When a washer or nut is identified as 1/2” (M8), this is
Lockwasher
Carriage Bolt
the Nominal size, meaning the inside diameter is 1/2 inch
Hex Nut
(8mm metric thread diameter); if a second number is present
it represents the threads per inch (distance between threads).
Wrench & Fastener Size Guide
When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ),
this means the Nominal size, or body diameter is 1/2 inch (8mm
metric thread diameter), the second number,16, represents the
threads per inch, (1.25 thread diameter). The final number is the
body length of the bolt or screw, 2 inches (50mm).
1/4” Bolt or Nut
Wrench—7/16”
5/16” Bolt or Nut
Wrench—1/2”
3/8” Bolt or Nut
Wrench—9/16”
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2” Bolt or Nut
Wrench—3/4”
M6 Bolt or Nut
Wrench—10mm
M8 Bolt or Nut
Wrench—13mm
M10 Bolt or Nut
Wrench—17mm
M14 Bolt or Nut
Wrench—22 mm
M12 Bolt or Nut
Wrench—19mm
IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO
MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY
OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS.
Briggs & Stratton Power Products Group
12301 W. Wirth Street
Wauwatosa, WI, 53222 USA
© Copyright 2016 by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
|