York Dm 240 User Manual

262259-YTG-B-0107

DESCRIPTION

YORK Sunline 2000™ units are convertible single package

high efficiency rooftops. All models have independent dual

refrigerant circuits for efficient part load operation. Although

the units are primarily designed for curb mounting on a roof,

they can also be slab-mounted at ground level or set on steel

beams above a finished roof.

TECHNICAL GUIDE

All units include:

SINGLE PACKAGE GAS/ELECTRIC UNITS

AND SINGLE PACKAGE AIR

CONDITIONERS

•

Powder Paint finish that meets ASTM-B-117 1000 hour

salt spray standards

Two-stage cooling provided by dual independent

refrigeration circuits with expansion valves, filter-driers,

high and low pressure/loss of charge switches and

freezestats

DM 180, 240 & 300

•

Scroll compressors (25T model only)

15, 20 & 25 NOMINAL TONS

Two-stage heating provided by dual independent heat

exchangers with aluminized steel tubes, redundant gas

valves, spark ignition with induced draft logic

•

Permanently lubricated motors

Bottom or side air discharge configuration capability

(field convertible)

•

Belt Drive Blower Motor with high static drive option

Constant supply air volume (CV) with optional variable

air volume (VAV)

•

Manufactured under the quality standards of ISO9001

S implicity® Control Board

Zero-25% fixed air damper with hood

Copper tube/aluminum fin coils

Hinged filter access and tooless latched doors

Rigging holes in base rails for lifting

Single point power connection

Complete factory package - tested, charged and wired

CSA agency approvals on all units

WARRANTY

•

One-year parts warranty

A Five-year parts warranty on the compressors and

electric heat elements

•

Ten-year parts warranty on the gas-fired heat

exchangers

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

262259-YTG-B-0107

PRODUCT NOMENCLATURE

15-25 Ton Sunline 2000™ Model Number Nomenclature

D M 180 N24 A 2 A AA 1 0 1 2 4 A

Product Category

Product Style

D = A/C, Single Pkg., R-22

A = Style A

Product Identifier

M = 8.5-9.0 EER A/C

Configuration Options (not required for all units)

These four digits will not be assigned until a quote is requested, or an order placed.

SS Drain Pan

CPC Controller, DFS, APS

Nominal Cooling Capacity

Johnson Controller, DFS, APS

Honeywell Controller, DFS, APS

180 = 15 Ton

240 = 20 Ton

300 = 25 Ton

Novar Controller, DFS, APS

Simplicity IntelliComfort Controller

Simplicity IntelliComfort Controller w/ModLinc

Hot Gas Bypass (Standard on VAV, Optional on CV)

Variable Air Volume (VFD) - Not Available with Factory Installed BAS Options

Variable Air Volume (VFD With Manual Bypass) - Not Available with Factory Installed BAS Options

Variable Air Volume (VFD-Ready for Customer Installed Drive)

2" Pleated filters

Heat Type and Nominal Heat Capacity

C00 = Cooling Only. No field installed

electric heat

Gas Heat Options

4" Pleated filters

N24 = 240 MBH Output Aluminized Steel

N32 = 320 MBH Output Aluminized Steel

S24 = 240 MBH Output Stainless Steel

S32 = 320 MBH Output Stainless Steel

BAS Ready Unit with Belimo Economizer

Double Wall Construction

Heat Reclaim Coil Options (2 or 3 Row, 1-5/8" or 2-1/8" Stub Out) (WJ and WR models only)

Any Combination of Additional Options that Don’t Have an Option Code Pre-assigned

Electric Heat Options

Product Generation

E18 = 18 KW

E36 = 36 KW

E54 = 54 KW

E72 = 72 KW

1 = First Generation

2 = Second Generation

Additional Options

Hinged Filter Door & Toolless Access Cabinet

Airflow

Standard Cabinet

A = Std. Drive

B = Std. Drive/Single Input Econo.

C = Std. Drive/Single Input Econo./Power Exhaust

(Downflow Only)

D = Std. Drive/Motorized Damper

N = Hi Static Drive

AA = None

AB = Phase Monitor

BA = Hinged Filter Door & Toolless Access Panels

BB = Phase Monitor, Hinged Filter Door & Toolless

Access Panels

AC = Coil Guard

AD = Dirty Filter Switch

BC = Coil Guard, Hinged Filter Door & Toolless

Access Panels

AE = Phase Monitor & Coil Guard

AF = Phase Monitor & Dirty Filter Switch

AG = Coil Guard & Dirty Filter Switch

AH = Phase Monitor, Coil Guard & Dirty Filter Switch

RC = Coil Guard & American Flag

TA = Technicoat Condenser Coil

TJ = Technicoat Evaporator Coil

TS = Technicoat Evaporator & Condenser Coils

P = Hi Static Drive/Single Input Econo.

Q = Hi Static Drive/Single Input Econo./Power Exhaust

(Downflow Only)

BD = Dirty Filter Switch, Hinged Filter Door &

Toolless Access Panels

BE = Phase Monitor & Coil Guard, Hinged Filter

Door & Toolless Access Panels

R = Hi Static Drive/Motorized Damper

BF = Phase Monitor & Dirty Filter Switch, Hinged

Filter Door & Toolless Access Panels

BG = Coil Guard & Dirty Filter Switch, Hinged Filter

Door & Toolless Access Panels

Voltage

2 = 208/230-3-60

4 = 460-3-60

5 = 575-3-60

BH = Phase Monitor, Coil Guard & Dirty Filter Switch,

Hinged Filter Door & Toolless Access Panels

ZZ = If desired option combination is not listed above, ZZ will be assigned and configuration options will be

located in digits 15-18.

Installation Options

A = No Options Installed

B = Option 1

C = Option 2

D = Options 1 & 2

E = Option 3

F = Option 4

G = Options 1 & 3

H = Options 1 & 4

J = Options 1, 2 & 3

K = Options 1, 2, & 4

L = Options 1,3 & 4

M = Options 1, 2, 3, & 4

N = Options 2 & 3

P = Options 2 & 4

Q = Options 2, 3, & 4

R = Options 3 & 4

S = Option 5

T = Options 1 & 5

U = Options 1, 3, & 5

V = Options 1, 4, & 5

W = Options 1, 3, 4, & 5

X = Options 3 & 5

Y = Options 4 & 5

Z = Options 3, 4 & 5

Options

1 = Disconnect

2 = Non-Pwr'd Conv. Outlet

3 = Smoke Detector S.A.

4 = Smoke Detector R.A.

5 = Pwr'd Conv. Outlet

Unitary Products Group

262259-YTG-B-0107

•

Low Ambient - An integrated low-ambient control

allows all units to operate in the cooling mode down

to 0ºF outdoor ambient without additional assis-

tance. Optionally, the control board can be pro-

grammed to lockout the compressors when the

outdoor air temperature is low or when free cooling

is available.

FEATURES

All models are available with a wide variety of factory-

mounted options such as stainless steel heat exchangers,

phase monitor, dirty filter switch, and coil guard to make them

suitable for almost every application.

All units are self-contained and assembled on full perimeter

base rails with holes in the four corners for overhead rigging.

Every unit is completely piped, wired, charged and tested at

the factory to simplify the field installation and to provide

years of dependable operation.

Anti-Short Cycle Protection - To aid compressor

life, an anti-short cycle delay is incorporated into the

standard controls. Compressor reliability is further

ensured by programmable minimum run times. For

testing, the anti short cycle delay can be temporarily

overridden with the push of a button.

All models (including those with an economizer) are suitable

for either bottom or horizontal duct connections. Models with

factory installed power exhaust are suitable for bottom

duct connections only. For bottom duct, you remove the

sheet metal panels from the supply and return air openings

through the base of the unit. For horizontal duct, you replace

the supply and return air panels on the rear of the unit with a

side duct flange accessory.

•

Lead-Lag - An integrated Lead-Lag option allows

equal run time hours on all compressors, thereby

extending the life of all compressors. This option is

selectable on the unit control board.

Fan Delays - Fan on and fan off delays are fully pro-

grammable. Furthermore, the heating and cooling

fan delay times are independent of one another. All

units are programmed with default values based

upon their configuration of cooling and heat.

All models are available with these “factory mounted” outdoor

air damper options:

•

Single enthalpy economizer

•

Safety Monitoring - The control board monitors the

high and low-pressure switches, the freezestats, the

gas valve, if applicable, and the temperature limit

switch on gas and electric heat units. The unit con-

trol board will alarm on ignition failures, compressor

lockouts and repeated limit switch trips.

Single enthalpy economizer with power exhaust

Motorized outdoor air damper

A fixed outdoor air intake assembly will be shipped in the

return air compartment of all units ordered without an econo-

mizer or motorized outdoor air damper option. The assembly

includes a rain hood with a damper that can be set for 10, 15

or 25% outdoor air. With bottom duct connections, the intake

damper assembly should be mounted over the opening in the

return air panel. With horizontal ductwork, it should be

mounted on the return air duct.

Nuisance Trip Protection and Strikes - To prevent

nuisance trouble calls, the control board uses a

“three times, you’re out” philosophy. The high and

low-pressure switches and the freezestats must trip

three times within two hours before the unit control

board will lock out the associated compressor.

All supply air blowers are equipped with a belt drive that can

be adjusted to meet the exact requirements of the job. A high

static drive option is available for applications with a higher

CFM and/or static pressure requirement. A variable air vol-

ume (VAV) option using a variable frequency drive is avail-

able for applications requiring a constant supply duct

pressure. A differential pressure transducer is used to moni-

tor supply duct static pressure and return a speed reference

signal to the VFD to control the output of the indoor blower

motor.

On Board Diagnostics - Each alarm will energize a

trouble light on the thermostat, if so equipped, and

flash an alarm code on the control board LED. Each

high and low-pressure switch alarm as well as each

freezestat alarm has its own flash code. The control

board saves the five most recent alarms in memory,

and these alarms can be reviewed at any time.

Alarms and programmed values are retained

through the loss of power.

All units have long lasting powder paint cabinets with 1000

hour salt spray test approval under ASTM-B117 procedures.

All compressors include scroll compressors and internal pres-

sure relief. Every refrigerant circuit includes an expansion

valve, a liquid line filter-drier, a discharge line high pressure

switch and a suction line with a freezestat and low pressure/

loss of charge switch to protect all system components. A hot

gas bypass option, consisting of an adjustable compressor

discharge bypass valve, is available for low cooling load

applications.

All models are CSA approved.

•

Warranty - All models include a one-year limited parts

warranty on the complete unit. Compressors and electric

heater elements carry a five-year warranty. Gas heat

exchangers carry a 10-year parts warranty.

•

S implicity® Controls - S implicity® control boards have

standardized a number of features previously available

only as options or by utilizing additional controls.

•

Gas Heat Operation - All gas heat units are built with

two heating sections for two equal stages of capacity

control. Each section includes a durable heat exchanger

Unitary Products Group

262259-YTG-B-0107

ELECTRIC HEATER LOCATION

(OPTIONAL ELECTRIC/ELECTRIC UNITS)

HIGH EFFICIENCY COMPRESSORS

WITH CRANKCASE HEATERS

20 GAUGE ALUMINIZED STEEL

TUBULAR HEAT EXCHANGERS

LONG LASTING

POWDER PAINT FINISH

COPPER TUBE/ALUMINUM FIN

CONDENSER COILS

LOW VOLTAGE RELAY BOARD

AND TERMINAL STRIP

ECONOMIZER HOOD

ELECTRICAL DISCONNECT

MOUNTING LOCATION

(Field installed)

KNOCKOUT FOR

SIDE CONTROL WIRING ENTRY

KNOCKOUT FOR

SIDE POWER WIRING ENTRY SIDE

2" DISPOSABLE

FILTERS

TERMINAL BLOCK

(For Single Point Power Supply

with Electric Heat)

ELECTRIC\ELECTRIC UNITS

OUTDOOR AIR OPENING

FOR SLIDE-IN/PLUG-IN

INTERNAL ECONOMIZER(OPTION)

BOTTOM POWER & CONTROL

WIRING ENTRY

KNOCKOUTS FOR SIDE

GAS SUPPLY ENTRY

SIDE AND BOTTOM

SUPPLY & RETURN AIR

DUCT OPENINGS(SIDE X SIDE)

HOLE FOR BOTTOM

GAS SUPPLY ENTRY

POWER VENTOR MOTOR

WITH POST PURGE CYCLE

1" NPTI

CONDENSATE DRAIN

GAS/ELECTRIC

UNIT SHOWN

BELT-DRIVE

BLOWER MOTOR

LOCATION OF VFD (Optional)

FULL PERIMETER 14 GUAGE BASE

RAILS WITH LIFTING HOLES

LOCATION OF VFD Bypass (Optional)

FIGURE 1 - UNIT CUTAWAY

with aluminized steel or optional stainless steel tubes, a

redundant gas valve, spark ignition, power venting, an

ignition module for 100% shut-off and all of the safety

controls required to meet the latest ANSI standards.

ble of introducing up to 100% outdoor air with nominal

1% leakage type dampers.

The enthalpy system contains one sensor that monitors

the outdoor air and determines when the air is cool

enough and dry enough to provide free cooling.

The gas supply piping can be routed into the heating

compartment through a hole in the base pan of the unit

or through a knockout in the piping panel on the front of

the unit.

The rainhood is painted to match the basic unit and must

be field-assembled before installing.

•

POWER EXHAUST - Our single economizer options are

available with power exhaust. Whenever the outdoor air

intake dampers are opened for free cooling, the exhaust

fan will be energized to prevent the conditioned space

from being over-pressurized during economizer operation.

•

Electric Heat Operation - All electric heat models (fac-

tory installed only) are wired for a single power source

and include a bank of nickel chromium elements

mounted at the discharge of the supply air blower to pro-

vide a high velocity and uniform distribution of air across

the heating elements. Every element is fully protected

against excessive current and temperature by fuses and

two thermal limit switches.

The exhaust fan, motor and controls are installed and

wired at the factory. The rain hood must be assembled

and installed in the field.

The power exhaust option can only be used on bot-

tom duct configurations.

The power supply wiring can be routed into the control

box through a threaded pipe connection in the base pan

of the unit or through a knockout in the wiring panel on

the front of the unit.

•

MOTORIZED OUTDOOR AIR INTAKE DAMPER -

Includes a slide-in / plug-in damper assembly with a 2-

position, spring return motor actuator which opens to a

pre-set position whenever the supply air blower is oper-

ating and will drive fully closed when the blower unit

shuts down.

•

BAS Controls - York’s Sunline™ series units offer factory

mounted BAS controls such as S implicity® INTELLI-Com-

fort™, Novar, Honeywell, Johnson, and CPC.

The rain hood is painted to match the basic unit and

must be field assembled before installing.

FACTORY-INSTALLED OPTIONS

•

SINGLE INPUT ELECTRONIC ENTHALPY ECONO-

MIZERS - Includes a slide-in / plug-in damper assembly

with fully modulating spring-return motor actuator capa-

•

PHENOLIC COATED EVAPORATOR AND CON-

DENSER COILS - Special coating process that utilizes

Technicoat 10-1" processes. Coating is applied by total

immersion of the complete coil for maximum protection.

Unitary Products Group

262259-YTG-B-0107

•

ELECTRIC HEATERS wired for single point power sup-

ply. These nickel chromium heater elements are pro-

vided with limit and automatic reset capability to prevent

operation at excessive temperatures.

you may order the unit with a “non-powered” conve-

nience outlet that can be wired in the field.

•

DISCONNECT SWITCH - For gas heat units and cooling

units with electric heat, a HACR breaker sized to the unit

is provided. For cooling only units, a switch sized to the

largest electric heat available for the particular unit is

provided. Factory installed option only.

VARIABLE AIR VOLUME (VAV) - A factory-installed

variable frequency drive (VFD), mounted in the Blower

Access compartment, is used to control the speed of the

indoor blower motor in order to maintain a constant static

pressure in the supply duct. A pressure transducer and

VAV control board are mounted inside the control box.

The drive comes completely wired and pre-programmed

from the factory.

•

BAS - Building Automation System Controls (avail-

able on two-system cooling product only).

S implicity® INTELLI-Comfort™ CONTROL - The York®

S implicity® INTELLI-Comfort™ control is factory

installed. It includes a supply air sensor, a return air sen-

sor, and an outside air sensor. There are provisions for a

field installed dirty filter indicator switch, an air-proving

switch, an Outside Air Humidity sensor, a Return Air

Humidity sensor, an Inside IAQ sensor, and an Outside

Air IAQ sensor. Construction mode operation, 365-day

real time clock with 7 day programming plus holiday

scheduling is built-in. Two different modes of demand

ventilation are achieved through the INTELLI-Comfort™

An optional, factory-installed manual bypass switch

available with factory-installed VFD can be found in the

Blower Motor Access compartment. The switch can be

used to either route power to the VFD for modulating

control of the blower motor, to bypass the drive and oper-

ate the motor at full speed, or to power the drive (and not

the motor) for diagnostic purposes.

Due to space limitations, VAV is not available with any of

the factory-installed BAS options described below, but is

available with ‘BAS-ready’ models. Terminal blocks are

provided in the control box for field wiring of the cus-

tomer-installed BAS.

using CO sensors. It uses an inside CO sensor to per-

form Demand Ventilation. It can also use an Outside CO

sensor to perform Differential Demand Ventilation. It

uses a Patented Comfort Ventilation algorithm to provide

comfortable ventilation air temperature. The patented

economizer-loading algorithm will protect the equipment

when harsh operating conditions exist. Humidity in the

occupied space or return duct can be monitored and

controlled via humidity sensors and the on-board con-

nection for hot gas re-heat system. It uses the INTELLI-

Start™ algorithm to maximize energy savings by recov-

ering the building from the Unoccupied Setpoints to the

Occupied Setpoints just in time for the Occupied Time

Period to begin. The S implicity® INTELLI-Comfort™ bal-

ances space temperature, ventilation air temperature,

A ‘VFD-ready’ option provides the provisions for a cus-

tomer-installed drive. The unit comes with a mounting

bracket installed in the Blower Access compartment

which may accommodate other vendor’s drives depend-

ing on their size. In order to utilize the unit’s mounting

bracket, the maximum recommended drive dimensions

are as follows:

For 5-hp motor applications........................ 10” H x 6” W x 7” D

For 7.5 thru 15-hp motor applications ........ 13” H x 8” W x 8” D

If the customer-installed drive will not fit in the allotted

space, then it will have to be mounted within a NEMA-4

enclosure for outside installation or inside the building on

a perpendicular wall not subjected to excessive tempera-

ture, vibration, humidity, dust, corrosive gas, explosive

gas, etc.

CO and humidity for ultimate comfort.

S implicity® INTELLI-Comfort™ with ModLINC CON-

TROL - The York® S implicity® INTELLI-Comfort™ with

ModLINC control is factory installed. It includes all the

features of the INTELLI-Comfort™ control with an addi-

tional control to translate communications from MOD-

BUS to the BACnet MSTP protocol.

A terminal block located in the control box is provided for

field connection of the VFD controls.

Novar® BAS CONTROL - The Novar® ETC-3 building

automation system controller is factory installed.

Includes supply air sensor, return air sensor, dirty filter

indicator switch, and air proving switch.

•

HOT GAS BYPASS - To allow for low cooling load oper-

ation, a direct-acting pressure-modulating bypass control

valve installed on the system #1 discharge line is used to

divert high temperature, high pressure refrigerant around

the TXV in order to maintain a desired minimum evapo-

rator pressure. HGBP is standard on all units with VAV

and optional with CV units.

JOHNSON CONTROLS BAS CONTROL - The Johnson

Control YK-UNT-1126 building automation system con-

troller is factory installed. Includes supply air sensor,

return air sensor, dirty filter indicator switch, and air prov-

ing switch.

•

FILTER OPTIONS - Standard units are shipped with 2”

throw-away filters installed. 2” pleated and 4” pleated fil-

ters are offered as a factory installed option.

CPC BAS CONTROL - The Computer Process Controls

Model 810-3060 ARTC Advanced Rooftop building auto-

mation system controller is factory installed. Includes

CONVENIENCE OUTLET - This 110 volt outlet can be

“powered” by the unit with a stepdown transformer or

Unitary Products Group

262259-YTG-B-0107

supply air sensor, return air sensor, dirty filter indicator

switch and air proving switch.

ble of introducing up to 100% outdoor air with nominal

1% leakage type dampers.

HONEYWELL BAS CONTROL - The Honeywell

W7750C building automation system controller is factory

installed. Includes air supply sensor, return air sensor,

dirty filter indicator switch, and air proving switch.

The enthalpy system contains one sensor that monitors

the outdoor air and determines when the air is cool

enough and dry enough to provide free cooling.

The rainhood is painted to match the basic unit and must

be field-assembled before installing.

•

SMOKE DETECTORS - (supply air & return air) The

smoke detectors stop operation of the unit by interrupting

power to the control board if smoke is detected within the

air compartment.

•

MOTORIZED OUTDOOR AIR INTAKE DAMPER -

Includes a slide-in / plug-in damper assembly with a 2-

position, spring return motor actuator which opens to

some pre-set position whenever the supply air blower is

operating and will drive fully closed when the blower unit

shuts down.

Factory installed smoke detectors in the return air,

may be subjected to freezing temperatures during

“off” times due to out side air infiltration. these smoke

detectors have an operational limit of 32°F to 131°F.

smoke detectors installed in areas that could be out

side those limitations will have to be moved to prevent

having false alarms.

The rain hood is painted to match the basic unit and

must be field assembled before installing.

•

ROOF CURBS - Fourteen-inch high roof curbs provide a

water-tight seal between the unit and the finished roof.

These full perimeter curbs meet the requirements of the

National Roofing Contractors Association (NRCA) and

are shipped knocked-down for field assembly.

•

COIL GUARD - Customers can purchase a coil guard kit

to protect the condenser coil from damage. This is not a

hail guard kit.

They're designed to fit inside the base rails of the unit

and include both a wood nailing strip and duct hanger

supports.

STAINLESS STEEL HEAT EXCHANGER - For applica-

tions in corrosive environments, this option provides a

full stainless steel heat exchanger assembly.

•

HIGH ALTITUDE NATURAL GAS - Burner orifices and

pilot orifices are provided for proper furnace operation at

altitudes up to 6,000 feet.

STAINLESS STEEL DRAIN PAN- An optional rust-proof

stainless steel drain pan is available to provide years of

trouble-free operation in corrosive environments.

PROPANE - Burner orifices, pilot orifices and gas valve

parts are provided to convert a natural gas furnace to

propane.

PHASE MONITORS - Designed to prevent unit damage.

The phase monitor will shut the unit down in an out-of-

phase condition.

HIGH ALTITUDE PROPANE - Burner orifices and pilot

orifices are provided for proper furnace operation at alti-

tudes up to 6,000 feet. This accessory supplements the

basic propane conversion kit.

•

HIGH SPEED DRIVE - Includes a belt and blower pulley

upgrade to enhance blower performance.

DIRTY FILTER SWITCH - This kit includes a differential

pressure switch that energizes the fault light on the unit

thermostat, indicating that there is an abnormally high

pressure drop across the filters. Factory installed option

or field installed accessory.

•

SIDE DUCT FLANGES - One-inch flanges replace the

supply and return air panels on the rear of the unit to

accommodate horizontal duct connections. These

flanges can also be used individually for bottom supply/

horizontal return or horizontal supply/bottom return. They

cannot be used on units with power exhaust.

•

HINGED FILTER DOOR/”TOOLESS” BLOWER AND

ACCESS PANELS (not hinged) - This option allows for

easy access and maintenance.

BAROMETRIC RELIEF DAMPER - This damper acces-

sory can be used to relieve internal building air pressure

on units with an economizer without power exhaust. This

accessory includes a rain hood, a bird screen and a fully

assembled damper. With bottom duct connections, the

damper should be mounted over the opening in the

return air panel. With horizontal ductwork, the accessory

should be mounted on the return air duct.

NOTE:Knobs are shipped separately within the unit to

prevent shipping damage. These must be field

installed for tool-less operation.

FIELD-INSTALLED ACCESSORIES

•

SINGLE INPUT ELECTRONIC ENTHALPY ECONO-

MIZERS - Includes a slide-in / plug-in damper assembly

with fully modulating spring-return motor actuator capa-

•

HIGH SPEED DRIVE - A smaller blower pulley and a

shorter belt increase the speed of the supply air blower

for applications with a higher CFM and/or static pressure

requirements.

Unitary Products Group

262259-YTG-B-0107

•

ENTHALPY ACCESSORY CONTROL KIT - This kit

contains the required components to convert a single

enthalpy economizer to dual enthalpy.

•

WOOD SKID - Allows unit to be handled with 90” forks.

CO SENSOR - Senses CO levels and automatically

overrides the economizer when levels rise above the

present limits.

•

BURGLAR BARS - Mount in the supply and return

openings to prevent entry into the duct work.

•

COIL GUARD - Customers can purchase a coil guard kit

to protect the condenser coil from damage. This is not a

hail guard kit.

FLUE EXHAUST EXTENSION KIT - In locations with

wind or weather conditions which may interfere with

proper exhausting of furnace combustion products, this

kit can be installed to prevent the flue exhaust from

entering nearby fresh air intakes.

•

PHASE MONITORS - Designed to prevent unit damage.

The phase monitor will shut the unit down in an out-of-

phase condition.

Unitary Products Group

262259-YTG-B-0107

TABLE 1: SOUND POWER RATING

-12

SOUND POWER (db 10

Watts)

ESP

IWG

BLOWER

UNIT

SIZE

Octave Band Centerline Frequency (Hz)

dB(A)

10Ft.²

CFM

SWL

dB(A)

RPM

BHP

125

250

500

1,000

2,000

4,000

8,000

180

240

300

6,000

8,000

1.00

1.30

1,080

1,120

1160

4.60

6.65

12.5

102

108

102

108

10,000

1. These values have been accessed using a model of sound propagation from a point source into the hemispheric\free field. The

dBA values provided are to be used for reference only. Calculation of dBA values cover matters of system design and the fan

manufacture has no way of knowing the details of each system. This constitutes and expectation to any specification or guarantee

requiring a dBA value or sound data in any other form than sound power level ratings.

2. At a distance of 10 feet from the blower.

TABLE 3: GAS HEAT RATIINGS

TABLE 2: CAPACITY RATINGS - (ARI 360)

MODEL

MBH INPUT

MBH OUTPUT

EER²

IPLV³

MODEL

MBH

300

400

300

400

300

400

240

320

240

320

240

320

DM180N/S24

DM180N/S32

COOLING ONLY

DM180C/E00

DM240C/E00

DM300C/E00

176

234

272

8.7

8.6

8.5

9.2

8.05

9.2

DM240N/S24

DM240N/S32

DM300N/S24

DM300N/S32

COOLING WITH GAS HEAT

DM180N/S

176

232

272

8.5

9.0

8.05

9.0

DM240N/S

NOTE: All gas units are two-stage heating.

First stage is 50% of total.

S.S.E. = Steady State Efficiency (80%) - output divided by input.

DM300N/S

COOLING WITH ELECTRIC HEAT

DM180E18

DM180E36

DM180E54

DM180E72

DM240E18

DM240E36

DM240E54

DM240E72

DM300E18

DM300E36

DM300E54

DM300E72

176

174

234

232

272

270

8.7

8.6

8.5

9.2

9.1

8.7

8.05

9.1

For units with VFD and electric or gas heat, the

speed of the indoor blower motor continues to

be controlled by duct static pressure via the

VAV control board.

9.1

If there are VAV boxes present in the duct sys-

tem, the boxes must be driven to the full-open

position using a customer-supplied power

source to assure adequate airflow across elec-

tric heating elements or gas heat exchanger

tubes.

9.0

1. Certified in accordance with the Unitary Large Equip-

ment certification program which is based on ARI Stan-

dard 340/360.

2. EER = Energy Efficiency Ratio at full load - the cooling

capacity in Btu’s per hour (Btuh) divided by the power

input in watts, expressed in Btuh per watt (Btuh/watt).

3. IPLV = Integrated Part Load Value.

Unitary Products Group

262259-YTG-B-0107

TABLE 4: DM 180 COOLING CAPACITIES (15 TON)

TEMPERATURE OF AIR ON CONDENSER COIL

AIR ON

EVAPORATOR

COIL

75°F

85°F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

TOTAL POWER

TOTAL

POWER

CAP.

INPUT

CAP.

INPUT

MBH

CFM

°F

223.2

206.6

190.0

171.6

232.6

215.3

198.0

178.8

242.0

224.0

206.0

186.0

230.0

211.5

191.0

236.0

217.0

195.9

16.6

15.9

15.2

14.8

14.7

16.8

16.1

15.4

15.0

14.9

17.0

16.3

15.6

15.2

15.1

16.5

15.8

15.4

15.3

16.7

16.0

15.6

15.5

116.8 95.5

74.1

212.0

195.5

179.0

161.6

221.5

204.3

187.0

168.8

231.0

213.0

195.0

176.0

217.9

199.5

180.1

222.8

204.0

184.1

17.5

16.8

16.1

15.6

15.5

17.7

17.0

16.3

15.8

15.7

17.9

17.2

16.5

16.0

15.9

17.4

16.7

16.2

16.1

17.6

16.9

16.4

16.3

110.9 89.5

68.2

143.3 121.9 100.5 79.2

137.8 116.5 95.1 73.7

4500

5250

6000

169.8 148.4 127.0 105.6 84.2

164.8 143.4 122.0 100.6 79.2

171.6 171.6 152.5 131.1 109.8 88.4

171.6 171.6 158.4 137.0 115.7 94.3

161.6 161.6 144.7 123.3 101.9 80.6

161.6 161.6 148.1 126.7 105.3 83.9

131.7 105.8 80.5

129.3 99.8

74.6

159.8 134.5 109.3 84.0

154.6 129.3 104.0 78.8

187.9 163.3 138.0 112.7 87.5

179.9 158.8 133.5 108.2 83.0

178.8 178.8 165.8 140.5 115.2 89.9

178.8 178.8 172.2 146.9 121.7 96.4

168.8 168.8 158.4 133.1 107.8 82.5

168.8 168.8 162.0 136.8 111.5 86.2

146.6 116.2 87.0

147.6 110.2 81.0

176.3 147.2 118.0 88.8

171.3 142.2 113.0 83.8

206.0 178.2 149.0 119.8 90.7

195.0 174.2 145.0 115.8 86.7

186.0 186.0 179.0 149.8 120.7 91.5

186.0 186.0 186.0 156.8 127.7 98.5

176.0 176.0 172.0 142.8 113.7 84.5

176.0 176.0 176.0 146.8 117.7 88.5

195.9 162.7 129.5 96.2

189.6 156.3 123.1 89.9

211.5 197.6 163.5 130.3 97.1

199.5 189.1 158.0 124.8 91.6

6750

7500

191.0 191.0 187.5 154.3 121.0 87.8

191.0 191.0 191.0 157.8 124.5 91.3

180.1 180.1 178.1 144.9 111.6 78.4

180.1 180.1 180.1 146.9 113.6 80.4

215.4 178.2 140.9 103.6

207.8 170.5 133.3 96.0

217.0 217.0 178.0 140.7 103.5

204.0 204.0 171.0 133.7 96.5

195.9 195.9 195.9 158.7 121.4 84.2

184.1 184.1 184.1 146.9 109.6 72.3

TEMPERATURE OF AIR ON CONDENSER COIL

AIR ON

EVAPORATOR

COIL

95°F

105°F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

TOTAL POWER

TOTAL

POWER

CAP.

INPUT

CAP.

INPUT

MBH

CFM

°F

200.9

184.4

168.0

151.6

210.4

193.2

176.0

158.8

220.0

202.0

184.0

166.0

205.8

187.5

169.2

209.7

191.0

172.3

18.4

17.7

17.0

16.4

16.3

18.6

17.9

17.2

16.6

16.5

18.8

18.1

17.4

16.8

16.7

18.3

17.6

17.0

16.9

18.5

17.8

17.2

17.1

105.0 83.6

62.2

188.8

173.2

157.5

143.7

196.9

180.6

164.3

149.9

205.0

188.0

171.0

156.0

192.1

174.8

159.4

196.2

178.5

162.9

19.4

18.6

17.8

17.3

19.6

18.8

18.0

17.4

19.8

19.0

18.2

17.6

19.2

18.4

17.8

19.4

18.6

18.0

101.7 80.3

58.9

132.4 111.0 89.6

68.2

128.2 106.8 85.5 64.1

153.4 133.4 112.0 90.6

4500

5250

6000

159.8 138.4 117.0 95.6

74.2

69.2

151.6 151.6 136.9 115.5 94.1

151.6 151.6 137.7 116.4 95.0

72.8

143.7 143.7 129.0 107.6 86.2

143.7 143.7 129.4 108.0 86.7

64.9

73.6

65.3

126.8 93.9

68.6

126.7 90.3

65.0

149.4 124.1 98.8

73.5

144.8 119.5 94.2 69.0

162.2 148.7 123.5 98.2

171.9 154.3 129.0 103.7 78.5

73.0

158.8 158.8 151.0 125.7 100.4 75.1

158.8 158.8 151.9 126.6 101.3 76.1

149.9 149.9 142.3 117.0 91.7

149.9 149.9 142.7 117.4 92.2

66.4

66.9

148.6 104.2 75.0

151.6 100.2 71.0

166.3 137.2 108.0 78.8

161.3 132.2 103.0 73.8

184.0 170.2 141.0 111.8 82.7

171.0 164.1 135.0 105.8 76.7

156.0 156.0 155.5 126.3 97.2

156.0 156.0 156.0 126.8 97.7

166.0 166.0 165.0 135.8 106.7 77.5

166.0 166.0 166.0 136.8 107.7 78.5

68.0

68.5

183.2 150.0 116.8 83.6

176.4 145.4 112.2 78.9

187.5 180.6 152.5 119.3 86.1

174.8 171.3 147.0 113.8 80.6

159.4 159.4 159.2 126.0 92.8

159.4 159.4 159.4 126.2 93.0

6750

7500

169.2 169.2 168.7 135.4 102.2 69.0

169.2 169.2 169.2 135.9 102.7 69.5

59.5

59.8

200.1 162.9 125.6 88.4

191.5 158.6 121.3 84.0

191.0 191.0 164.0 126.7 89.5

172.3 172.3 172.3 135.1 97.8

178.5 178.5 159.0 121.7 84.5

162.9 162.9 162.9 125.6 88.3

60.5

51.1

Unitary Products Group

262259-YTG-B-0107

TABLE 4: DM 180 COOLING CAPACITIES (15 TON) (CONTINUED)

TEMPERATURE OF AIR ON CONDENSER COIL

AIR ON

EVAPORATOR

115°F

SENSIBLE CAPACITY, MBH

COIL

TOTAL POWER

ENTERING DRY BULB, °F

CAP.

INPUT

°F

MBH

CFM

176.8

161.9

147.0

135.8

183.4

167.9

152.5

140.9

190.0

174.0

158.0

146.0

178.4

162.0

149.7

182.8

166.0

153.4

20.4

19.5

18.6

18.1

18.2

20.5

19.6

18.8

18.3

18.4

20.7

19.8

18.9

18.4

18.5

20.1

19.2

18.6

18.7

20.3

19.4

18.9

19.0

98.3 77.0

55.6

124.1 102.7 81.3 59.9

147.0 128.4 107.0 85.6

135.8 135.8 121.1 99.7

4500

64.2

78.3

56.9

126.5 86.6

61.3

140.2 114.9 89.6 64.4

152.5 143.2 118.0 92.7

5250

6000

67.5

140.9 140.9 133.6 108.3 83.0

57.7

154.6 96.3

67.0

156.3 127.2 98.0 68.8

158.0 158.0 129.0 99.8

70.7

146.0 146.0 146.0 116.8 87.7

58.5

169.6 140.7 107.5 74.3

162.0 162.0 141.5 108.3 75.1

149.7 149.7 149.7 116.5 83.3

6750

7500

50.1

182.8 154.3 117.0 79.7

166.0 166.0 154.0 116.7 79.5

153.4 153.4 153.4 116.1 78.9

41.6

1. These capacities are gross ratings. For net capacity, deduct the air blower motor, MBH = 3.415 x KW. Refer to the appropriate Blower Perfor-

mance Table for the KW of the supply air blower motor.

2. These ratings include the condenser fan motors (Total 1.5 KW) and the compressor motors but not the supply air blower motor.

Nominal Rating

Unitary Products Group

262259-YTG-B-0107

TABLE 5: DM 240 COOLING CAPACITIES (20 TON)

TEMPERATURE OF AIR ON CONDENSER COIL

AIR ON

EVAPORATOR

COIL

75°F

85°F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

TOTAL POWER

TOTAL

POWER

CAP.

INPUT

CAP.

INPUT

MBH

CFM

°F

322.5

291.2

260.0

225.8

331.2

299.1

267.0

231.9

340.0

307.0

274.0

238.0

313.5

279.8

243.0

320.0

285.5

248.0

22.3

21.6

20.9

20.3

19.9

22.3

21.6

20.9

20.3

19.9

22.3

21.6

20.9

20.3

19.9

21.9

21.2

20.6

20.2

22.2

21.5

20.9

20.5

159.6 131.1 102.6

298.6

272.3

246.0

213.1

308.3

281.1

254.0

220.1

318.0

290.0

262.0

227.0

297.7

269.0

233.1

305.5

276.0

239.1

23.9

22.9

21.9

21.3

20.8

24.0

23.0

22.0

21.4

20.9

24.1

23.1

22.1

21.5

21.0

23.5

22.5

21.8

21.3

23.8

22.8

22.2

21.7

154.3 125.8 97.3

194.3 165.8 137.3 108.8

188.7 160.1 131.6 103.1

6000

7000

8000

229.0 200.5 172.0 143.5 115.0

223.0 194.5 166.0 137.5 109.0

225.8 225.8 192.7 164.2 135.7 107.2

225.8 225.8 194.2 165.7 137.2 108.7

213.1 213.1 185.3 156.8 128.3 99.7

213.1 213.1 190.3 161.8 133.3 104.8

186.6 147.0 113.3

180.9 140.3 106.6

219.0 185.3 151.6 118.0

211.7 178.0 144.3 110.6

251.5 223.7 190.0 156.3 122.6

242.5 215.7 182.0 148.3 114.6

231.9 231.9 212.8 179.2 145.5 111.8

231.9 231.9 214.6 180.9 147.2 113.5

220.1 220.1 203.1 169.4 135.7 102.1

220.1 220.1 208.7 175.0 141.3 107.6

213.5 162.9 124.0

207.5 154.9 116.0

243.8 204.9 166.0 127.1

234.8 195.9 157.0 118.1

274.0 246.9 208.0 169.1 130.2

262.0 236.9 198.0 159.1 120.2

238.0 238.0 233.0 194.1 155.2 116.4

238.0 238.0 235.0 196.1 157.2 118.4

227.0 227.0 221.0 182.1 143.2 104.4

227.0 227.0 227.0 188.1 149.2 110.4

273.3 229.1 184.8 140.5

264.6 220.3 176.0 131.8

279.8 266.2 231.5 187.2 142.9

269.0 256.4 222.0 177.7 133.4

9000

243.0 243.0 240.5 196.2 151.9 107.7

243.0 243.0 241.5 197.2 152.9 108.7

233.1 233.1 230.1 185.8 141.5 97.2

233.1 233.1 233.1 188.8 144.5 100.2

302.9 253.2 203.5 153.9

294.4 244.7 195.1 145.4

285.5 285.5 255.0 205.3 155.6

276.0 276.0 246.0 196.3 146.6

10000

248.0 248.0 248.0 198.3 148.6 99.0

239.1 239.1 239.1 189.4 139.8 90.1

TEMPERATURE OF AIR ON CONDENSER COIL

AIR ON

EVAPORATOR

COIL

95°F

105°F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

TOTAL POWER

TOTAL

POWER

CAP.

INPUT

CAP.

INPUT

MBH

CFM

°F

274.7

253.3

232.0

200.4

285.3

263.2

241.0

208.2

296.0

273.0

250.0

216.0

282.0

258.3

223.1

291.0

266.5

230.3

25.5

24.2

22.9

22.3

21.7

25.7

24.4

23.1

22.5

21.9

25.9

24.6

23.3

22.7

22.1

25.0

23.7

23.1

22.5

25.4

24.1

23.5

22.9

148.9 120.4 91.9

255.9

236.4

217.0

192.0

266.2

246.0

225.8

199.8

276.5

255.5

234.5

207.5

261.2

239.8

212.1

267.0

245.0

216.7

27.0

25.6

24.2

23.5

23.0

27.1

25.7

24.3

23.6

23.1

27.3

25.9

24.5

23.8

23.2

26.2

24.8

24.1

23.6

26.6

25.2

24.5

23.9

142.4 113.9 85.4

183.0 154.5 126.0 97.4

177.2 148.7 120.2 91.7

6000

7000

8000

217.0 188.5 160.0 131.5 103.0

209.5 183.5 155.0 126.5 98.0

200.4 200.4 177.9 149.4 120.8 92.3

200.4 200.4 186.4 157.9 129.4 100.8

192.0 192.0 172.2 143.7 115.1 86.6

192.0 192.0 179.5 151.0 122.4 93.9

175.2 133.7 100.0

171.7 126.2 92.5

204.4 170.7 137.0 103.3

197.5 163.8 130.1 96.4

233.5 207.7 174.0 140.3 106.6

222.0 201.4 167.8 134.1 100.4

208.2 208.2 193.4 159.7 126.0 92.3

208.2 208.2 202.7 169.0 135.3 101.6

199.8 199.8 186.3 152.6 118.9 85.2

199.8 199.8 194.2 160.5 126.8 93.1

201.5 146.9 108.0

201.0 138.4 99.5

225.8 186.9 148.0 109.1

217.8 178.9 140.0 101.1

250.0 226.9 188.0 149.1 110.2

234.5 219.4 180.5 141.6 102.7

216.0 216.0 209.0 170.1 131.2 92.4

216.0 216.0 219.0 180.1 141.2 102.4

207.5 207.5 200.5 161.6 122.7 83.9

207.5 207.5 209.0 170.1 131.2 92.4

255.8 211.6 167.3 123.0

241.1 201.2 156.9 112.6

258.3 246.7 212.5 168.2 123.9

239.8 232.2 202.3 158.0 113.7

9000

223.1 223.1 219.6 175.3 131.1 86.8

223.1 223.1 224.6 180.3 136.1 91.8

212.1 212.1 208.6 164.3 120.0 75.7

212.1 212.1 212.8 168.6 124.3 80.0

285.9 236.3 186.6 136.9

264.4 223.5 173.8 124.1

266.5 266.5 237.0 187.3 137.6

245.0 245.0 224.0 174.3 124.6

10000

230.3 230.3 230.3 180.6 130.9 81.2

216.7 216.7 216.7 167.0 117.3 67.6

Unitary Products Group

262259-YTG-B-0107

TABLE 5: DM 240 COOLING CAPACITIES (20 TON) (CONTINUED)

TEMPERATURE OF AIR ON CONDENSER COIL

AIR ON

EVAPORATOR

115°F

SENSIBLE CAPACITY, MBH

COIL

TOTAL POWER

ENTERING DRY BULB, °F

CAP.

INPUT

°F

MBH

CFM

237.1

219.5

202.0

183.6

247.0

228.8

210.5

191.3

257.0

238.0

219.0

199.0

240.4

221.3

201.0

242.9

223.5

203.1

28.5

27.0

25.5

24.7

24.2

28.5

27.0

25.6

24.8

24.3

28.6

27.1

25.6

24.8

24.3

27.5

26.0

25.1

24.6

27.8

26.3

25.5

25.0

135.9 107.4 78.9

171.5 143.0 114.5 85.9

6000

202.0 178.5 150.0 121.5 93.0

183.6 183.6 166.5 138.0 109.4 80.9

183.6 183.6 172.5 144.0 115.5 87.0

168.2 118.6 85.0

190.6 156.9 123.2 89.5

7000

8000

210.5 195.2 161.5 127.8 94.1

191.3 191.3 179.2 145.5 111.8 78.1

191.3 191.3 185.8 152.1 118.4 84.7

200.5 129.9 91.0

209.8 170.9 132.0 93.1

219.0 211.9 173.0 134.1 95.2

199.0 199.0 192.0 153.1 114.2 75.4

199.0 199.0 199.0 160.1 121.2 82.4

226.3 190.8 146.5 102.2

221.3 217.7 192.0 147.7 103.4

9000

201.0 201.0 197.5 153.3 109.0 64.7

201.0 201.0 201.0 156.8 112.5 68.2

242.9 210.7 161.0 111.3

223.5 223.5 211.0 161.3 111.6

10000

203.1 203.1 203.1 153.4 103.7 54.0

1. These capacities are gross ratings. For net capacity, deduct the air blower motor, MBH = 3.415 x KW. Refer to the appropriate Blower Perfor-

mance Table for the KW of the supply air blower motor.

2. These ratings include the condenser fan motors (Total 2.3 KW) and the compressor motors but not the supply air blower motor.

Nominal Rating

Unitary Products Group

262259-YTG-B-0107

TABLE 6: DM 300 COOLING CAPACITIES (25 TON)

TEMPERATURE OF AIR ON CONDENSER COIL

AIR ON

EVAPORATOR

COIL

75°F

85°F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

TOTAL POWER

TOTAL

POWER

CAP.

INPUT

CAP.

INPUT

MBH

CFM

°F

364.9

341.5

318.1

290.0

287.2

367.6

344.0

320.4

292.1

289.2

370.2

346.5

322.7

294.1

291.3

348.9

325.1

296.2

293.3

351.4

327.4

298.2

295.3

24.2

23.7

23.2

23.1

22.7

24.2

23.7

23.2

23.1

22.7

24.2

23.7

23.2

23.1

22.7

23.5

23.0

22.9

22.6

23.4

22.9

22.8

22.4

197.4 161.8 126.1

349.9

326.3

302.8

279.5

276.6

355.6

331.7

307.8

284.1

281.1

361.3

337.0

312.7

288.6

285.6

342.3

317.6

293.2

290.1

347.6

322.6

297.7

294.6

26.9

26.4

25.9

25.4

27.0

26.5

25.9

25.4

27.1

26.5

26.0

25.5

26.6

26.0

25.5

26.6

26.1

25.6

188.9 153.3 117.6

237.8 202.2 166.5 130.9

230.5 194.8 159.2 123.6

7500

8750

278.2 242.5 206.9 171.2 135.6

272.1 236.4 200.8 165.1 129.5

290.0 290.0 259.7 224.1 188.4 152.8

287.2 287.2 259.1 223.5 187.8 152.2

279.5 279.5 247.5 211.8 176.2 140.5

276.6 276.6 251.1 215.5 179.8 144.2

214.3 173.3 131.2

209.9 165.4 123.3

257.4 215.3 173.2 131.0

251.1 209.0 166.9 124.8

300.5 257.2 215.1 173.0 130.8

292.4 252.6 210.5 168.3 126.2

292.1 292.1 270.1 228.0 185.8 143.7

289.2 289.2 269.4 227.3 185.1 143.0

284.1 284.1 259.4 217.3 175.1 133.0

281.1 281.1 263.2 221.1 179.0 136.9

231.3 184.9 136.3

230.8 177.6 129.0

277.0 228.4 179.8 131.2

271.8 223.2 174.6 126.0

10000

322.7 271.9 223.3 174.7 126.1

312.7 268.7 220.1 171.5 122.9

294.1 294.1 280.4 231.8 183.2 134.6

291.3 291.3 279.7 231.1 182.5 133.9

288.6 288.6 271.3 222.7 174.1 125.5

285.6 285.6 275.3 226.7 178.1 129.5

301.9 246.6 191.2 135.9

293.9 238.6 183.2 127.9

325.1 292.9 237.6 182.2 126.9

317.6 286.4 231.0 175.7 120.3

11250

12500

296.2 296.2 297.8 242.5 187.1 131.8

293.3 293.3 289.6 234.3 178.9 123.6

293.2 293.2 284.5 229.2 173.8 118.5

290.1 290.1 285.0 229.6 174.3 118.9

326.9 264.8 202.7 140.6

316.0 253.9 191.8 129.7

327.4 314.0 251.9 189.8 127.7

322.6 304.0 241.9 179.8 117.7

298.2 298.2 315.2 253.1 191.0 128.9

295.3 295.3 299.6 237.5 175.4 113.3

297.7 297.7 297.7 235.6 173.5 111.4

294.6 294.6 294.6 232.5 170.4 108.3

TEMPERATURE OF AIR ON CONDENSER COIL

AIR ON

EVAPORATOR

COIL

95°F

105°F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

SENSIBLE CAPACITY, MBH

ENTERING DRY BULB, °F

TOTAL POWER

TOTAL

POWER

CAP.

INPUT

CAP.

INPUT

MBH

CFM

°F

334.8

311.2

287.6

269.0

266.0

343.6

319.3

295.1

276.1

273.0

352.4

327.5

302.7

283.1

280.0

335.7

310.2

290.2

286.9

343.9

317.8

297.3

293.9

29.7

29.1

28.5

27.7

28.0

29.8

29.2

28.7

27.8

28.1

29.9

29.3

28.8

27.9

28.3

29.6

29.0

28.1

28.5

29.9

29.3

28.4

28.8

180.4 144.8 109.1

316.8

294.4

272.1

253.0

250.3

323.0

300.2

277.4

258.0

255.3

329.2

306.0

282.8

263.0

260.2

311.8

288.2

267.9

265.1

317.6

293.5

272.9

270.1

32.8

32.3

31.7

30.8

31.3

33.0

32.4

31.8

30.9

31.4

33.1

32.5

31.9

31.1

31.5

32.8

32.2

31.3

31.7

33.0

32.4

31.5

32.0

162.5 126.9 91.3

223.2 187.5 151.9 116.3

211.3 175.6 140.0 104.3

7500

8750

266.0 230.3 194.7 159.0 123.4

260.0 224.3 188.7 153.1 117.4

269.0 269.0 235.2 199.6 163.9 128.3

266.0 266.0 243.1 207.5 171.8 136.2

253.0 252.8 218.1 182.5 146.8 111.2

250.3 250.3 223.0 187.4 151.7 116.1

205.4 157.5 115.4

194.4 139.0 96.9

244.9 202.7 160.6 118.5

232.9 190.8 148.7 106.5

284.3 248.0 205.8 163.7 121.6

271.4 242.6 200.5 158.4 116.2

276.1 276.1 248.7 206.6 164.5 122.3

273.0 273.0 257.1 214.9 172.8 130.7

258.0 257.9 231.7 189.5 147.4 105.3

255.3 255.3 236.8 194.7 152.6 110.5

230.4 170.2 121.6

226.3 151.1 102.5

266.5 217.9 169.3 120.7

254.6 206.0 157.4 108.8

10000

302.7 265.6 217.0 168.4 119.8

282.8 260.8 212.2 163.6 115.0

283.1 283.1 262.2 213.6 165.0 116.4

280.0 280.0 271.0 222.4 173.8 125.2

263.0 263.0 245.2 196.6 148.0 99.4

260.2 260.2 250.7 202.1 153.5 104.9

285.9 230.5 175.2 119.8

272.1 216.8 161.4 106.1

310.2 279.8 224.5 169.1 113.8

288.2 271.3 217.6 162.3 106.9

11250

12500

290.2 290.2 271.2 215.9 160.5 105.2

286.9 286.9 280.4 225.0 169.7 114.3

267.9 267.9 251.5 196.2 140.8 85.5

265.1 265.1 257.2 201.8 146.5 91.1

305.2 243.1 181.0 118.9

289.7 227.6 165.5 103.4

317.8 294.1 232.0 169.9 107.8

293.5 281.7 223.0 160.9 98.8

297.3 297.3 280.3 218.2 156.1 94.0

293.9 293.9 289.7 227.6 165.5 103.4

272.9 272.9 257.9 195.8 133.7 71.6

270.1 270.1 263.7 201.6 139.5 77.4

Unitary Products Group

262259-YTG-B-0107

TABLE 6: DM 300 COOLING CAPACITIES (25 TON) (CONTINUED)

TEMPERATURE OF AIR ON CONDENSER COIL

AIR ON

EVAPORATOR

115°F

SENSIBLE CAPACITY, MBH

COIL

TOTAL POWER

ENTERING DRY BULB, °F

CAP.

INPUT

°F

MBH

CFM

298.7

277.7

256.6

236.9

234.7

302.4

281.1

259.8

239.9

237.6

306.1

284.5

263.0

242.8

240.5

287.9

266.1

245.7

243.3

291.3

269.3

248.6

246.2

36.0

35.4

34.8

34.0

34.5

36.1

35.5

34.9

34.1

34.6

36.3

35.7

35.1

34.2

34.8

35.9

35.3

34.5

35.0

36.1

35.5

34.7

35.2

144.7 109.0 73.4

199.3 163.7 128.1 92.4

7500

254.0 218.4 182.7 147.1 111.5

236.9 236.6 201.0 165.4 129.7 94.1

234.7 234.7 202.9 167.2 131.6 96.0

183.4 120.5 78.3

221.0 178.8 136.7 94.6

8750

258.5 237.2 195.1 153.0 110.9

239.9 239.7 214.6 172.5 130.4 88.2

237.6 237.6 216.6 174.5 132.4 90.3

222.2 131.9 83.3

242.6 194.0 145.4 96.8

10000

263.0 256.1 207.5 158.9 110.3

242.8 242.8 228.2 179.6 131.0 82.4

240.5 240.5 230.4 181.8 133.2 84.6

258.4 203.1 147.7 92.4

266.1 262.7 210.8 155.4 100.1

11250

12500

245.7 245.7 231.8 176.5 121.1 65.8

243.3 243.3 234.0 178.7 123.3 68.0

274.2 212.1 150.0 87.9

269.3 269.3 214.1 152.0 89.9

248.6 248.6 235.5 173.4 111.3 49.2

246.2 246.2 237.7 175.6 113.5 51.4

1. These capacities are gross ratings. For net capacity, deduct the air blower motor, MBH = 3.415 x KW. Refer to the appropriate Blower Perfor-

mance Table for the KW of the supply air blower motor.

2. These ratings include the condenser fan motors (Total 2.1 KW) and the compressor motors but not the supply air blower motor.

Unitary Products Group

262259-YTG-B-0107

order to use the indoor blower tables for high altitude applica-

tions, certain corrections are necessary.

CFM, STATIC PRESSURE, AND POWER - ALTI-

TUDE AND TEMPERATURE CORRECTIONS

A centrifugal fan is a "constant volume" device. This means

that, if the rpm remains constant, the CFM delivered is the

same regardless of the density of the air. However, since the

air at high altitude is less dense, less static pressure will be

generated and less power will be required than a similar

application at sea level. Air density correction factors are

shown in Table 7 and Figure 2.

The information below should be used to assist in application

of product when being applied at altitudes at or exceeding

1000 feet above sea level.

The air flow rates listed in the standard blower performance

tables are based on standard air at sea level. As the altitude

or temperature increases, the density of air decreases. In

TABLE 7: ALTITUDE CORRECTION FACTORS

ALTITUDE (FEET)

AIR TEMP

1000

1.022

1.002

0.982

0.964

0.947

0.929

0.912

2000

0.986

0.966

0.948

0.930

0.913

0.897

0.880

3000

0.950

0.931

0.913

0.896

0.880

0.864

0.848

4000

0.916

0.898

0.880

0.864

0.848

0.833

0.817

5000

0.882

0.864

0.848

0.832

0.817

0.802

0.787

6000

0.849

0.832

0.816

0.801

0.787

0.772

0.758

7000

0.818

0.802

0.787

0.772

0.758

0.744

0.730

8000

0.788

0.772

0.757

0.743

0.730

0.716

0.703

9000

0.758

0.743

0.729

0.715

0.702

0.689

0.676

10000

0.729

0.715

0.701

0.688

0.676

0.663

0.651

1.060

1.039

1.019

1.000

0.982

0.964

0.946

100

The examples below will assist in determining the airflow per-

formance of the product at altitude.

blower tables to select the blower speed and the BHP

requirement.

Example 1: What are the corrected CFM, static pressure,

and BHP at an elevation of 5,000 ft. if the blower performance

data is 6,000 CFM, 1.5 IWC and 4.0 BHP?

Solution: As in the example above, no temperature informa-

tion is given so 70°F is assumed.

The 1.5" static pressure given is at an elevation of 5,000 ft.

The first step is to convert this static pressure to equivalent

sea level conditions.

Solution: At an elevation of 5,000 ft., the indoor blower will

still deliver 6,000 CFM if the rpm is unchanged. However,

Table 7 must be used to determine the static pressure and

BHP. Since no temperature data is given, we will assume an

air temperature of 70°F. Table 7 shows the correction factor

to be 0.832.

Sea level static pressure = 1.5 / .832 = 1.80"

Enter the blower table at 6000 sCFM and static pressure of

1.8". The rpm listed will be the same rpm needed at 5,000 ft.

Corrected static pressure = 1.5 x 0.832 = 1.248 IWC

Corrected BHP = 4.0 x 0.832 = 3.328

Suppose that the corresponding BHP listed in the table is 3.2.

This value must be corrected for elevation.

Example 2: A system, located at 5,000 feet of elevation, is to

BHP at 5,000 ft = 3.2 x .832 = 2.66

deliver 6,000 CFM at a static pressure of 1.5". Use the unit

Unitary Products Group

262259-YTG-B-0107

FIGURE 2 - ALTITUDE/TEMPERATURE CONVERSION FACTOR

Unitary Products Group

262259-YTG-B-0107

TABLE 8: SUPPLY AIR BLOWER PERFORMANCE (15 TON) -

COOLING ONLY 180 MBH - BOTTOM DUCT CONNECTIONS

MOTOR

PULLEY

(TURNS

OPEN)*

CFM

6000

BHP

BLOWER

SPEED,

(RPM)

4500

BHP

5250

BHP

6750

BHP

7200

ESP

BHP

208 VOLT AND STANDARD DRIVE

850

870

6.0**

5.5

4.5

3.5

3.0

2.0

1.0

0.9

1.0

1.1

1.2

1.3

1.4

1.5

2.4

2.5

2.6

2.9

3.0

3.1

3.2

2.2

2.3

2.4

2.6

2.7

2.8

2.9

0.7

0.8

0.9

1.0

1.1

1.2

1.3

3.0

3.1

3.4

3.6

3.7

3.8

3.9

2.7

2.8

3.0

3.2

3.3

3.4

3.5

0.5

0.6

0.7

0.8

0.9

1.0

1.1

3.2

3.5

3.7

4.0

4.1

4.2

4.5

2.9

3.1

3.3

3.6

3.7

3.8

4.0

0.2

0.3

0.5

0.6

0.7

0.9

4.1

4.4

4.7

4.8.

5.0

5.2

3.7

3.9

4.2

4.3

4.5

4.7

915

0.2

0.4

0.5

0.6

0.7

4.5

4.9

5.1

5.4

5.7

4.0

4.4

4.6

4.8

5.1

965

980

1010

1040

208 VOLT AND HIGH SPEED DRIVE

965

980

6.0

5.5

4.5

3.5

3.0

2.0

1.0

1.2

1.3

1.5

1.6

1.7

1.9

2.1

2.9

3.0

3.2

3.4

3.5

3.7

3.9

2.6

2.7

2.9

3.0

3.1

3.3

3.5

1.0

1.1

1.3

1.4

1.5

1.7

2.0

3.6

3.7

3.9

4.0

4.2

4.5

4.7

3.2

3.3

3.5

3.6

3.8

4.0

4.2

0.8

0.9

1.1

1.2

1.3

1.5

1.8

4.0

4.1

4.5

4.7

4.9

5.1

5.5

3.6

3.7

4.0

4.2

4.4

4.6

4.9

0.5

0.6

0.8

1.0

1.2

4.7

4.8

5.1

5.5

5.7

4.2

4.3

4.6

4.9

5.1

0.4

5.0

4.4

0.5

5.1

4.6

1025

1065

1095

1130

1170

0.7

5.6

5.0

230/460/575 VOLT AND STANDARD DRIVE

870

915

6.0**

5.0

4.0

3.5

2.0

1.0

1.1

1.2

1.3

1.5

1.6

2.4

2.6

2.9

3.0

3.2

3.3

2.2

2.4

2.6

2.7

2.9

3.0

0.8

0.9

1.0

1.1

1.3

1.4

3.1

3.3

3.6

3.7

3.9

4.0

2.8

3.0

3.2

3.3

3.5

3.6

0.6

0.7

0.8

0.9

1.1

1.2

3.5

3.7

4.0

4.1

4.5

4.7

3.1

3.3

3.6

3.7

4.0

4.2

0.2

0.3

0.5

0.6

0.9

1.0

4.1

4.4

4.7

4.8

5.3

5.5

3.7

3.9

4.2

4.3

4.7

4.9

0.2

0.4

0.5

0.7

4.5

5.0

5.1

5.7

4.0

4.4

4.6

5.1

965

980

1040

1065

230/460/575 VOLT AND HIGH SPEED DRIVE

980

6.0

4.5

4.0

3.5

2.5

1.5

1.0

1.3

1.5

1.6

1.7

1.9

2.1

2.2

2.9

3.2

3.4

3.5

3.7

3.9

4.0

2.6

2.9

3.0

3.1

3.3

3.5

3.6

1.1

1.3

1.4

1.5

1.7

2.0

2.1

3.7

3.9

4.0

4.2

4.5

4.7

4.8

3.3

3.5

3.6

3.8

4.0

4.2

4.3

0.9

1.1

1.2

1.3

1.5

1.8

2.0

4.1

4.5

4.7

4.9

5.1

5.5

5.7

3.7

4.0

4.2

4.4

4.6

4.9

5.1

0.6

0.9

1.0

1.2

4.8

5.3

5.5

5.7

4.3

4.7

4.9

5.1

0.5

5.1

4.6

1040

1065

1095

1130

1170

1190

0.7

5.7

5.1

NOTES: 1. Blower performance includes fixed outdoor air, 2” T/A filters, a dry evaporator coil and no electric heat.

2. Refer to Table 13 for additional static resistances.

ESP = External Static Pressure available for the supply and return air duct system. All internal unit resistances have been deducted from the

total static pressure of the blower.

* Do NOT close the pulley below 1 turn open.

** Factory setting.

Unitary Products Group

262259-YTG-B-0107

TABLE 9: SUPPLY AIR BLOWER PERFORMANCE (20 TON) - COOLING ONLY

240 MBH - BOTTOM DUCT CONNECTIONS

MOTOR

PULLEY

(TURNS

OPEN)*

CFM

8000

BHP

BLOWER

SPEED,

(RPM)

6000

BHP

7000

BHP

9000

BHP

9400

BHP

ESP

208 VOLT AND STANDARD DRIVE

870

900

930

950

980

1015

6.0**

5.0

4.0

3.0

2.0

1.0

0.4

0.8

1.1

1.3

1.6

1.9

2.1

3.2

4.1

4.6

5.3

5.9

1.8

2.7

3.4

3.9

4.5

5.0

0.1

0.5

0.9

1.1

1.4

1.7

2.3

3.5

4.5

5.1

5.8

6.5

2.0

2.9

3.8

4.3

4.9

5.5

0.2

0.6

0.8

1.2

1.5

3.8

4.9

5.5

6.3

7.0

3.2

4.1

4.6

5.3

5.9

0.1

0.4

0.7

1.0

5.1

5.9

6.9

7.7

4.3

5.0

5.8

6.5

0.2

0.6

7.3

8.2

6.1

6.9

208 VOLT AND HIGH SPEED DRIVE

950

980

6.0

5.0

4.0

3.5

3.0

2.5

2.0

1.0

1.3

1.6

1.8

1.9

2.0

2.1

2.3

2.4

4.6

5.3

5.8

6.1

6.2

6.4

6.6

6.7

3.9

4.5

4.9

5.1

5.2

5.4

5.5

5.6

1.1

1.4

1.7

1.8

1.9

2.0

2.1

2.2

5.1

5.8

6.3

6.5

6.8

7.0

7.2

7.3

4.3

4.9

5.3

5.5

5.7

5.9

6.0

6.1

0.8

1.2

1.5

1.6

1.7

1.8

1.9

2.1

5.5

6.3

6.9

7.1

7.4

7.6

7.8

7.9

4.6

5.3

5.8

6.0

6.2

6.4

6.6

6.7

0.4

0.7

1.0

1.1

1.2

1.3

1.5

5.9

6.9

7.5

7.8

8.1

8.3

8.6

5.0

5.8

6.3

6.6

6.8

7.0

7.2

0.2

0.5

0.6

0.7

7.3

7.9

8.3

8.6

6.1

6.7

7.0

7.3

1010

1020

1035

1050

1075

1100

230/460/575 VOLT AND STANDARD DRIVE

870

900

6.0**

5.0

4.0

3.5

2.5

1.5

1.0

0.4

0.8

1.1

1.3

1.6

1.9

2.0

2.1

3.2

4.1

4.6

5.3

5.9

6.1

1.8

2.7

3.4

3.9

4.5

5.0

5.1

0.1

0.5

0.9

1.1

1.4

1.7

1.8

2.3

3.5

4.5

5.1

5.8

6.5

6.6

2.0

2.9

3.8

4.3

4.9

5.5

5.6

0.2

0.6

0.8

1.2

1.5

1.6

3.8

4.9

5.5

6.3

7.0

7.3

3.2

4.1

4.6

5.3

5.9

6.1

930

0.1

0.4

0.7

1.0

1.1

5.1

5.9

6.9

7.7

7.9

4.3

5.0

5.8

6.5

6.7

950

980

0.2

0.6

0.7

7.3

8.2

8.6

6.1

6.9

7.3

1015

1025

230/460/575 VOLT AND HIGH SPEED DRIVE

950

980

6.0

5.0

4.0

3.5

3.0

2.0

1.5

1.0

1.3

1.6

1.9

2.0

2.1

2.3

2.4

2.5

4.6

5.3

5.9

6.2

6.4

6.6

6.7

6.8

3.9

4.5

5.0

5.2

5.4

5.5

5.6

5.7

1.1

1.4

1.7

1.9

2.0

2.1

2.2

2.3

5.1

5.8

6.5

6.8

7.0

7.2

7.3

7.4

4.3

4.9

5.5

5.7

5.9

6.0

6.1

6.2

0.8

1.2

1.5

1.7

1.8

1.9

2.1

2.2

5.5

6.3

7.0

7.4

7.6

7.8

7.9

8.1

4.6

5.3

5.9

6.2

6.4

6.6

6.7

6.8

0.4

0.7

1.0

1.2

1.3

1.5

5.9

6.9

7.7

8.1

8.3

8.6

5.0

5.8

6.5

6.8

7.0

7.2

0.2

0.6

0.7

7.3

8.2

8.6

6.1

6.9

7.3

1015

1035

1050

1080

1100

1120

NOTES: 1. Blower performance includes fixed outdoor air, 2” T/A filters, a dry evaporator coil and no electric heat.

2. Refer to Table 13 for additional static resistances.

ESP = External Static Pressure available for the supply and return air duct system. All internal unit resistances have been deducted from the

total static pressure of the blower.

* Do NOT close the pulley below 1 turn open.

** Factory setting.

Unitary Products Group

262259-YTG-B-0107

TABLE 10: SUPPLY AIR BLOWER PERFORMANCE (15 TON) - GAS HEAT

180 MBH - BOTTOM DUCT CONNECTIONS

MOTOR

PULLEY

(TURNS

OPEN)*

CFM

6000

BHP

BLOWER

SPEED,

(RPM)

4500

BHP

5250

BHP

6750

BHP

7200

ESP

BHP

208 VOLT AND STANDARD DRIVE

850

870

6.0**

5.5

4.5

3.5

3.0

2.0

1.0

0.9

1.0

1.1

1.2

1.3

1.4

1.6

2.4

2.5

2.6

2.7

2.9

3.0

3.2

2.1

2.2

2.4

2.5

2.6

2.7

2.9

0.6

0.7

0.8

0.9

1.0

1.1

1.3

2.9

3.0

3.1

3.2

3.4

3.6

3.8

2.6

2.7

2.8

2.9

3.0

3.2

3.4

0.3

0.4

0.5

0.6

0.7

0.8

1.0

3.4

3.5

3.6

3.7

3.8

4.0

4.4

3.0

3.1

3.2

3.3

3.4

3.6

3.9

915

0.2

0.4

0.5

0.6

0.8

4.1

4.4

4.5

4.7

5.0

3.7

3.0

4.0

4.2

4.5

965

0.2

0.3

0.4

0.6

5.0

5.1

5.4

5.6

4.5

4.6

4.8

5.0

980

1010

1040

208 VOLT AND HIGH SPEED DRIVE

965

980

6.0

5.5

4.5

3.5

2.0

1.0

1.2

1.3

1.4

1.6

1.9

2.1

2.7

2.9

3.1

3.4

3.6

3.9

2.5

2.6

2.8

3.0

3.2

3.5

0.9

1.0

1.2

1.4

1.7

1.9

3.2

3.4

3.6

3.9

4.4

4.7

2.9

3.0

3.2

3.5

3.9

4.2

0.6

0.7

0.9

1.1

1.4

1.6

3.7

3.8

4.1

4.5

5.0

5.5

3.3

3.4

3.7

4.0

4.5

4.9

0.4

0.5

0.7

0.9

1.2

4.4

4.5

4.8

5.1

5.8

3.9

4.0

4.3

4.6

5.2

0.2

0.3

0.4

5.0

5.1

5.5

4.5

4.6

4.9

1025

1065

1125

1170

230/460/575 VOLT AND STANDARD DRIVE

870

915

6.0**

5.0

4.0

3.5

2.5

1.5

1.0

1.1

1.2

1.3

1.4

1.5

1.6

2.5

2.6

2.7

2.9

3.0

3.1

3.4

2.2

2.4

2.5

2.6

2.7

2.8

3.0

0.7

0.8

0.9

1.0

1.1

1.2

1.4

3.0

3.1

3.2

3.4

3.6

3.7

3.9

2.7

2.8

2.9

3.0

3.2

3.3

3.5

0.4

0.5

0.6

0.7

0.8

0.9

1.1

3.5

3.6

3.7

3.8

4.0

4.2

4.5

3.1

3.2

3.3

3.4

3.6

3.8

4.0

0.2

0.4

0.5

0.6

0.7

0.9

4.1

4.4

4.5

4.7

4.9

5.1

3.7

3.9

4.0

4.2

4.4

4.6

965

0.2

0.3

0.4

0.5

5.0

5.1

5.4

5.7

4.5

4.6

4.8

5.1

980

1015

1050

1065

230/460/575 VOLT AND HIGH SPEED DRIVE

980

6.0

4.5

4.0

2.5

1.5

1.0

1.3

1.6

1.7

1.9

2.1

2.2

2.9

3.2

3.4

3.6

3.9

4.0

2.6

2.9

3.0

3.2

3.5

3.6

1.0

1.3

1.4

1.7

1.8

1.9

3.4

3.8

3.9

4.4

4.7

4.8

3.0

3.4

3.5

3.9

4.2

4.3

0.7

1.0

1.1

1.4

1.6

1.7

3.8

4.4

4.5

5.0

5.5

5.6

3.4

3.9

4.0

4.5

4.9

5.0

0.5

0.8

0.9

1.2

4.5

5.0

5.1

5.8

4.0

4.5

4.6

5.2

0.3

5.1

4.6

1045

1065

1125

1170

1190

0.6

5.6

5.0

NOTES: 1. Blower performance includes a gas-fired heat exchanger, fixed outdoor air, two-inch T/A filters and a dry evaporator coil.

2. Refer to the additional Static Resistances table.

ESP = External Static Pressure available for the supply and return air duct system. All internal unit resistances have been deducted from the

total static pressure of the blower.

* Do NOT close the pulley below 1 turn open.

** Factory setting.

Unitary Products Group

262259-YTG-B-0107

TABLE 11: SUPPLY AIR BLOWER PERFORMANCE (20 TON) - GAS HEAT

240 MBH - BOTTOM DUCT CONNECTIONS

MOTOR

PULLEY

(TURNS

OPEN)*

CFM

8000

BHP

BLOWER

SPEED,

(RPM)

6000

BHP

7000

BHP

9000

BHP

9400

BHP

ESP

208 VOLT AND STANDARD DRIVE

870

900

930

950

980

995

1015

6.0**

5.0

4.0

3.0

2.0

1.5

1.0

1.3

1.4

1.6

1.7

1.9

2.1

2.2

3.6

3.8

4.1

4.2

4.5

4.6

4.8

3.0

3.2

3.4

3.6

3.8

3.9

4.0

0.7

0.9

1.1

1.3

1.5

1.6

1.7

4.3

4.7

5.0

5.1

5.4

5.5

4.7

3.7

4.0

4.2

4.3

4.5

4.7

4.8

0.2

0.4

0.6

0.8

1.0

1.1

1.2

5.1

5.6

5.9

6.0

6.3

6.4

6.6

4.3

4.7

5.0

5.1

5.3

5.4

5.6

0.1

0.2

0.4

0.5

0.7

6.7

6.9

7.2

7.5

7.8

5.7

5.8

6.1

6.3

6.6

0.1

0.2

8.5

8.6

7.1

7.3

208 VOLT AND HIGH SPEED DRIVE

950

980

6.0

5.0

4.5

3.5

2.5

2.0

1.0

1.7

1.9

2.1

2.3

2.5

2.6

2.9

4.2

4.5

4.9

5.1

5.3

5.6

3.6

3.8

3.9

4.1

4.3

4.4

4.7

1.3

1.5

1.6

1.8

2.0

2.1

2.3

5.1

5.4

5.5

5.8

6.1

6.3

6.8

4.3

4.5

4.7

4.9

5.1

5.3

5.7

0.8

1.0

1.1

1.3

1.4

1.5

1.8

6.0

6.3

6.4

6.7

7.1

7.3

7.9

5.1

5.3

5.4

5.7

6.0

6.2

6.6

0.2

0.4

0.5

0.7

0.9

1.0

6.9

7.2

7.5

8.0

8.4

8.6

5.8

6.1

6.3

6.7

7.0

7.2

0.1

8.5

7.1

995

0.2

8.6

7.3

1025

1050

1065

1100

230/460/575 VOLT AND STANDARD DRIVE

870

900

6.0**

5.0

4.0

3.5

2.5

2.0

1.5

1.0

1.3

1.4

1.6

1.7

1.9

2.1

2.2

2.3

3.6

3.8

4.1

4.2

4.5

4.6

4.8

4.9

3.0

3.2

3.4

3.6

3.8

3.9

4.0

4.1

0.7

0.9

1.1

1.3

1.5

1.6

1.7

1.8

4.3

4.7

5.0

5.1

5.4

5.5

5.7

5.8

3.7

4.0

4.2

4.3

4.5

4.7

4.8

4.9

0.2

0.4

0.6

0.8

1.0

1.1

1.2

1.3

5.1

5.6

5.9

6.0

6.3

6.4

6.6

6.7

4.3

4.7

5.0

5.1

5.3

5.4

5.6

5.7

930

0.1

0.2

0.4

0.5

0.6

0.7

6.7

6.9

7.2

7.5

7.8

8.0

5.7

5.8

6.1

6.3

6.6

6.7

950

965

0.1

0.2

8.5

8.6

7.1

7.3

995

1015

1025

230/460/575 VOLT AND HIGH SPEED DRIVE

950

980

6.0

5.0

4.5

4.0

3.5

3.0

2.5

1.5

1.0

1.7

1.9

2.1

2.2

2.3

2.5

2.6

2.9

3.1

4.2

4.5

4.6

4.8

4.9

5.1

5.3

5.6

5.8

3.6

3.8

3.9

4.0

4.1

4.3

4.4

4.7

4.9

1.3

1.5

1.6

1.7

1.8

2.0

2.1

2.3

2.5

5.1

5.4

5.5

5.7

5.8

6.1

6.3

6.8

7.0

4.3

4.5

4.7

4.8

4.9

5.1

5.3

4.7

5.9

0.8

1.0

1.1

1.2

1.3

1.4

1.5

1.8

1.9

6.0

6.3

6.4

6.6

6.7

7.1

7.3

7.9

8.3

5.1

5.3

5.4

5.6

5.7

6.0

6.2

6.6

6.9

0.2

0.4

0.5

0.6

0.7

0.9

1.0

6.9

7.2

7.5

7.8

8.0

8.4

8.6

5.8

6.1

6.3

6.6

6.7

7.0

7.2

0.1

8.5

7.1

995

0.2

8.6

7.3

1015

1025

1050

1065

1100

1120

NOTES: 1. Blower performance includes a gas-fired heat exchanger, fixed outdoor air, two-inch T/A filters and a dry evaporator coil.

2. Refer to the additional Static Resistances table.

ESP = External Static Pressure available for the supply and return air duct system. All internal unit resistances have been deducted from the

total static pressure of the blower.

* Do NOT close the pulley below 1 turn open.

** Factory setting.

Unitary Products Group

262259-YTG-B-0107

TABLE 12: SUPPLY AIR BLOWER PERFORMANCE (25 TON) - GAS HEAT

300 MBH - BOTTOM DUCT CONNECTIONS

MOTOR

PULLEY

(TURNS

OPEN)*

CFM

10000

BHP

BLOWER

SPEED,

(RPM)

7500

BHP

8750

BHP

11250

BHP

12500

ESP

BHP

208 VOLT AND STANDARD DRIVE

975

6.0

5.0

4.0

3.0

2.0

1.0

0.0

1.2

1.4

1.6

1.8

2.0

2.2

2.4

5.9

6.2

6.6

6.9

7.3

7.7

8.0

4.9

5.1

5.4

5.7

6.0

6.3

6.6

5.0

0.7

0.9

1.1

1.3

1.6

1.8

7.3

7.7

8.1

8.5

8.9

9.3

9.7

6.0

6.3

6.7

7.0

7.3

7.6

8.0

1005

1040

1070

1100

1135

1165

0.2

0.4

0.6

0.8

1.0

9.7

10.2

10.6

11.1

11.6

8.0

8.3

8.7

9.1

9.5

0.2

13.5

11.0

208 VOLT AND HIGH SPEED DRIVE

1140

1180

1215

1255

1290

1330

1365

6.0

5.0

4.0

3.0

2.0

1.0

0.0

2.2

2.5

2.7

3.0

3.2

3.5

3.7

7.7

8.2

6.3

6.7

7.0

7.4

7.8

8.2

8.6

1.6

1.9

2.1

2.4

2.7

3.0

3.2

9.4

9.9

7.7

8.1

8.5

9.0

9.4

9.9

10.3

0.9

1.2

1.4

1.7

2.0

2.3

2.6

11.2

11.8

12.3

12.9

13.5

14.1

14.7

9.2

9.7

0.3

0.6

0.9

1.2

1.5

1.8

13.7

14.3

15.0

15.6

16.4

17.0

11.2

11.7

12.3

12.8

13.4

13.9

8.6

10.4

11.0

11.5

12.0

12.6

10.1

10.6

11.1

11.6

12.1

9.1

9.5

10.0

10.5

230/460/575 VOLT AND STANDARD DRIVE

975

6.0*

5.0

4.0

3.0

2.0

1.0

0.0

1.4

1.6

1.8

2.0

2.1

2.4

2.6

5.9

6.2

6.6

6.9

7.3

7.7

8.0

4.9

5.1

5.4

5.7

6.0

6.3

6.6

1.0

1.2

1.4

1.6

1.8

2.0

2.2

7.3

7.7

8.1

8.5

8.9

9.3

9.7

6.0

6.3

6.7

7.0

7.3

7.6

8.0

0.5

0.7

0.9

1.1

1.3

1.6

1.8

8.8

9.2

7.2

7.6

8.0

8.3

8.7

9.1

9.5

1005

1040

1070

1100

1135

1165

0.1

0.3

0.6

0.8

1.0

1.3

10.9

11.4

11.9

12.4

13.0

13.5

8.9

9.7

9.4

10.2

10.6

11.1

11.6

9.8

10.2

10.6

11.0

0.2

0.4

0.7

14.3

14.9

15.5

11.7

12.2

12.7

230/460/575 VOLT AND HIGH SPEED DRIVE

1140

1180

1215

1255

1290

1330

1365

6.0

5.0

4.0

3.0

2.0

1.0

0.0

2.4

2.7

2.9

3.2

3.4

3.7

3.9

7.7

8.2

6.3

6.7

7.0

7.4

7.8

8.2

8.6

2.1

2.3

2.6

2.9

3.1

3.4

3.7

9.4

9.9

7.7

8.1

8.5

9.0

9.4

9.9

10.3

1.6

1.9

2.2

2.5

2.7

3.0

3.3

11.2

11.8

12.3

12.9

13.5

14.1

14.7

9.2

9.7

1.1

1.4

1.7

2.0

2.2

2.6

2.9

13.1

13.7

14.3

15.0

15.6

16.4

17.0

10.7

11.2

11.7

12.3

12.8

13.4

13.9

0.5

0.8

1.1

1.4

15.0

15.8

16.4

17.2

12.3

12.9

13.5

14.1

8.6

10.4

11.0

11.5

12.0

12.6

10.1

10.6

11.1

11.6

12.1

9.1

9.5

10.0

10.5

NOTES: 1. Blower performance includes a gas-fired heat exchanger, fixed outdoor air, two-inch T/A filters and a dry evaporator coil.

2. Refer to the additional Static Resistances table.

ESP = External Static Pressure available for the supply and return air duct system. All internal unit resistances have been deducted from the

total static pressure of the blower.

* Do NOT close the pulley below 1 turn open.

** Factory setting.

15 HP Motor is required.

Unitary Products Group

262259-YTG-B-0107

TABLE 13: BLOWER MOTOR AND DRIVE DATA

BELT

(NOTCHED)

MOTOR

ADJUSTABLE MOTOR PULLEY

FIXED BLOWER PULLEY

OUTSIDE PITCH

BLOWER

DRIVE RANGE

(RPM)

MODEL

SIZE

OUTSIDE PITCH

PITCH

LENGTH QTY.

(IN.)

EFF.

(%)

DESIG-

NATION

BORE DESIG-

(IN.) NATION

BORE DESIG-

HP FRAME

DIA.

(IN.)

DIA.

(IN.)

DIA.

(IN.)

DIA.

(IN.)

(IN.) NATION

Standard 850/1065

BK90

8.75

7.75

11.75

10.75

11.3

8.4

BX81

BX68

BX83

BX81

82.8

69.8

84.8

82.8

84.0

High

15 TON

20 TON

25 TON

184 T

1VP56

1VP68

5.35

6.75

4.3-5.3

1-1/8

BK80

Speed 965/1190

Access

7.4

Standard 870/1025

BK120

11.4

10.4

11.1

9.5

1-3/16

1-7/16

High

7.5 213 T

5.5-6.5

1-3/8

Speed 950/1120

Access

BK110

Standard 950/1120 10 215 T 89.5

High

Speed 1140/1365 15 254 T

Access

1VP68

6.75

7.5

1-3/8 1B5V110

1VP75X

6.2-7.4 1-5/8 1B5V94

9.7

1-7/16 5VX840

1. All motors have a nominal speed of 1800 RPM, a 1.15 service factor and a solid base. They can operate to the limit of their service factor because

they are located in the moving air, upstream of any heating device.

2. Do NOT close this pulley below 1 turn open.

TABLE 14: STATIC RESISTANCES

RESISTANCE, IWG

CFM

DESCRIPTION

15 TON

6000

0.1

20 TON

8000

0.1

25 TON

10000

0.1

4500

0.1

0.3

0.4

0.1

7200

0.1

0.4

0.5

0.1

0.3

6000

0.1

0.4

0.5

0.1

0.2

9400

0.1

0.5

0.6

0.2

0.5

7500

0.1

0.4

0.5

0.1

0.3

12500

0.1

WET INDOOR COIL

18 KW

36 KW

54 KW

72 KW

0.4

0.5

0.6

0.4

0.5

0.6

ELECTRIC HEAT OPTIONS

0.5

0.6

0.7

0.5

0.6

0.7

ECONOMIZER OPTION

0.1

0.2

0.3

HORIZONTAL DUCT CONNECTIONS²

0.2

0.3

0.5

0.6

1. Deduct these resistance values from the available external static pressures shown in the respective Blower Performance Table (See Note 2 for

exception.)

2. Since the resistance to air flow will be less for horizontal duct connections than for bottom duct connections, add these pressures to the ESP values

on the respective unit’s blower performance table.

TABLE 15: POWER EXHAUST PERFORMANCE

STATIC RESISTANCE OF RETURN DUCTWORK, IWG

MOTOR

SPEED¹

0.2

0.3

0.4

0.5

0.6

CFM

HIGH²

MEDIUM

LOW

5250

4900

4400

0.83

0.77

0.72

4500

3900

3700

0.85

0.79

0.74

4200

3500

3000

0.88

0.82

0.78

3750

2900

0.93

0.85

3000

0.99

1. Power exhaust motor is a 3/4 HP, PSC type with sleeve bearings, a 48 frame and inherent protection.

2. The factory setting.

Unitary Products Group

262259-YTG-B-0107

TABLE 16: DM 180, 240 ELECTRICAL DATA WITHOUT POWERED CONVENIENCE OUTLET

COMPRESSORS

HEATER OPTION

MAX.

FUSE/

MIN.

MODEL

(TON-

OD FAN

MOTORS

FLA EACH

CONV

OUTLET

AMPS

BLOWER

MOTOR

FLA

CIRCUIT

AMPACITY

(AMPS)

BRKR¹

SIZE

(AMPS)

100

125

175

200

100

150

175

225

VOLTAGE

RLA

LRA

MODEL KW STAGES AMPS

EACH

NAGE)

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

0.0

85.4

13.5

27.0

40.6

54.1

0.0

37.5

75.1

112.6

150.1

43.3

86.6

129.9

173.2

208

230

460

575

208

230

460

575

19.2

9.6

124

4.5

4.3

2.2

1.7

4.5

4.3

2.2

1.7

14.0

7.0

0.0

111.2

158.4

167.7

85.0

18.0

36.0

54.0

72.0

0.0

85.0

125.8

147.4

190.7

42.6

180

(15)

18.0

36.0

54.0

72.0

0.0

21.7

43.3

65.0

86.6

17.3

34.6

52.0

69.3

37.5

75.1

112.6

150.1

42.6

62.9

73.7

95.4

33.7

110

18.0

36.0

54.0

72.0

0.0

7.7

5.3

49.9

58.6

75.9

110.3

118.2

165.4

174.7

109.9

132.8

154.4

197.7

55.1

125

175

200

125

150

175

225

13.5

27.0

40.6

54.1

0.0

19.2

9.6

124

19.6

9.8

18.0

36.0

54.0

72.0

0.0

43.3

86.6

129.9

173.2

21.7

43.3

65.0

86.6

240

(20)

18.0

36.0

54.0

72.0

0.0

55.1

66.4

77.2

98.6

110

44.5

53.6

18.0

36.0

54.0

72.0

17.3

34.6

52.0

69.3

7.7

8.2

62.2

79.5

NOTE 1: HACR Type per NEC.

Unitary Products Group

262259-YTG-B-0107

TABLE 17: DM 300 ELECTRICAL DATA STANDARD MOTOR WITHOUT POWERED CONVENIENCE OUTLET

COMPRESSORS

HEATER OPTION

MAX.

FUSE/

MIN.

MODEL

(TON-

OD FAN

MOTORS

FLA EACH

CONV

OUTLET

AMPS

BLOWER

MOTOR

FLA

CIRCUIT

AMPACITY

(AMPS)

BRKR¹

SIZE

(AMPS)

150

200

150

175

225

VOLTAGE

RLA

LRA

MODEL KW STAGES AMPS

EACH

NAGE)

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

129.3

175.9

185.2

126.9

140.8

162.4

205.7

63.5

13.5

27.0

40.6

54.1

37.5

74.9

112.7

150.2

43.3

86.6

129.9

173.2

208

230

460

575

41.0

20.5

17.3

255

145

102

4.5

4.3

2.2

1.7

28.0

26.0

13.0

10.0

0.0

18.0

36.0

54.0

72.0

300

(25)

18.0

36.0

54.0

72.0

21.7

43.3

65.0

86.6

17.3

34.6

52.0

69.3

63.5

70.4

81.2

102.9

52.3

110

18.0

36.0

54.0

72.0

55.8

64.5

81.8

NOTE 1: HACR Type per NEC.

TABLE 18: DM 300 ELECTRICAL DATA HIGH STATIC MOTOR WITHOUT POWERED CONVENIENCE OUTLET

COMPRESSORS

HEATER OPTION

MAX.

FUSE/

MIN.

MODEL

(TON-

OD FAN

MOTORS

FLA EACH

CONV

OUTLET

AMPS

BLOWER

MOTOR

FLA

CIRCUIT

AMPACITY

(AMPS)

BRKR¹

SIZE

(AMPS)

175

200

225

175

200

250

VOLTAGE

RLA

LRA

MODEL KW STAGES AMPS

EACH

NAGE)

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

139.9

141.9

189.1

198.4

139.5

156.5

178.2

221.5

69.8

13.5

27.0

40.6

54.1

37.5

74.9

112.7

150.2

208

230

460

575

41.0

20.5

17.3

255

145

102

4.5

4.3

2.2

1.7

38.6

19.3

15.4

0.0

18.0

36.0

54.0

72.0

43.3

86.6

129.9

173.2

21.7

43.3

65.0

86.6

300

(25)

18.0

36.0

54.0

72.0

69.8

78.3

89.1

110.7

57.7

100

125

18.0

36.0

54.0

72.0

17.3

34.6

52.0

69.3

62.6

71.2

88.5

100

NOTE 1: HACR Type per NEC.

Unitary Products Group

262259-YTG-B-0107

TABLE 19: DM 180, 240 ELECTRICAL DATA WITH POWERED CONVENIENCE OUTLET

COMPRESSORS

HEATER OPTION

MAX.

FUSE/

BRKR¹

SIZE

MIN.

CIRCUIT

AMPACITY

(AMPS)

MODEL

(TON-

OD FAN

MOTORS

FLA EACH

CONV

OUTLET

AMPS

BLOWER

MOTOR

FLA

VOLTAGE

RLA

LRA

MODEL KW STAGES AMPS

EACH

NAGE)

(AMPS)

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

0.0

95.4

110

125

175

200

110

150

175

225

13.5

27.0

40.6

54.1

0.0

18.0

36.0

54.0

72.0

0.0

37.5

75.1

112.6

150.1

43.3

86.6

129.9

173.2

208

230

460

575

208

230

460

575

19.2

9.6

124

4.5

4.3

2.2

1.7

4.5

4.3

2.2

1.7

14.0

7.0

10.0

5.0

123.7

170.9

180.2

95.0

138.3

159.9

203.2

47.6

180

(15)

18.0

36.0

54.0

72.0

0.0

18.0

36.0

54.0

72.0

0.0

13.5

27.0

40.6

54.1

0.0

21.7

43.3

65.0

86.6

17.3

34.6

52.0

69.3

37.5

75.1

112.6

150.1

47.6

69.1

80.0

101.6

37.7

110

7.7

5.3

4.0

54.9

63.6

80.9

120.3

130.7

177.9

187.2

119.9

145.3

166.9

210.2

60.1

125

150

200

125

150

175

225

19.2

9.6

124

19.6

9.8

10.0

5.0

18.0

36.0

54.0

72.0

0.0

18.0

36.0

54.0

72.0

0.0

43.3

86.6

129.9

173.2

21.7

43.3

65.0

86.6

240

(20)

60.1

72.6

83.5

105.1

48.5

110

18.0

36.0

54.0

72.0

17.3

34.6

52.0

69.3

7.7

8.2

4.0

58.6

67.2

84.5

NOTE 1: HACR Type per NEC.

Unitary Products Group

262259-YTG-B-0107

TABLE 20: DM 300 ELECTRICAL DATA STANDARD MOTOR WITH POWERED CONVENIENCE OUTLET

COMPRESSORS

HEATER OPTION

MAX.

FUSE/

MIN.

MODEL

(TON-

OD FAN

MOTORS

FLA EACH

CONV

OUTLET

AMPS

BLOWER

MOTOR

FLA

CIRCUIT

AMPACITY

(AMPS)

BRKR¹

SIZE

(AMPS)

175

200

175

225

VOLTAGE

RLA

LRA

MODEL KW STAGES AMPS

EACH

NAGE)

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

139.3

141.2

188.4

197.7

136.9

153.3

174.9

218.2

68.5

13.5

27.0

40.6

54.1

37.5

74.9

112.7

150.2

43.3

86.6

129.9

173.2

208

230

460

575

41.0

20.5

17.3

255

145

102

4.5

4.3

2.2

1.7

28.0

26.0

13.0

10.0

5.0

18.0

36.0

54.0

72.0

300

(25)

18.0

36.0

54.0

72.0

21.7

43.3

65.0

86.6

17.3

34.6

52.0

69.3

68.5

76.6

87.5

109.1

56.3

110

18.0

36.0

54.0

72.0

4.0

60.8

69.5

86.8

NOTE 1: HACR Type per NEC.

TABLE 21: DM 300 ELECTRICAL DATA HIGH STATIC MOTOR WITH POWERED CONVENIENCE OUTLET

COMPRESSORS

HEATER OPTION

MAX.

FUSE/

MIN.

MODEL

(TON-

OD FAN

MOTORS

FLA EACH

CONV

OUTLET

AMPS

BLOWER

MOTOR

FLA

CIRCUIT

AMPACITY

(AMPS)

BRKR¹

SIZE

(AMPS)

175

225

175

225

250

VOLTAGE

RLA

LRA

MODEL KW STAGES AMPS

EACH

NAGE)

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

None

E18

E36

E54

E72

149.9

154.4

201.6

210.9

149.5

169.0

190.7

234.0

74.8

13.5

27.0

40.6

54.1

37.5

74.9

112.7

150.2

208

230

460

575

41.0

20.5

17.3

255

145

102

4.5

4.3

2.2

1.7

38.6

19.3

15.4

10.0

5.0

18.0

36.0

54.0

72.0

43.3

86.6

129.9

173.2

21.7

43.3

65.0

86.6

300

(25)

18.0

36.0

54.0

72.0

74.8

84.5

95.3

117.0

61.7

110

125

18.0

36.0

54.0

72.0

17.3

34.6

52.0

69.3

4.0

67.6

76.2

93.5

100

NOTE 1: HACR Type per NEC.

Unitary Products Group

262259-YTG-B-0107

TABLE 22: DM VOLTAGE LIMITATIONS

VOLTAGE LIMITATIONS

VOLTAGE

POWER

SUPPLY

MIN.

MAX.

VOLTAGE

208/230-3-60

187

253

LIMITATIONS

414

518

506

630

460-3-60

575-3-60

1. Utilization Range “A” in accordance with ARI Standard

110.

TABLE 23: PHYSICAL DATA

MODELS

DM180

DM240

DM300

CENTRIFUGAL BLOWER (Dia. x Wd.)

FAN MOTOR HP, STANDARD/HI STATIC

ROWS DEEP

15x15

5.0

18x15

7.5

18x15

10/15

EVAPORATOR

BLOWER

EVAPORATOR COIL FINS PER INCH

13.5

FACE AREA (Sq. Ft.)

15.5

20.52

PROPELLER DIA. (In.) (Each)

CONDENSER FAN

(Two Per Unit)

FAN MOTOR HP

NOM. CFM TOTAL

ROWS DEEP

(Each)

6,500

7,200

43.3

CONDENSER

COIL

FINS PER INCH

FACE AREA (Sq. Ft.)

43.3

5 TON HERMETIC (RECIP.)

COMPRESSOR

(Qty. Per Unit)

1¹

10 TON TANDEM (RECIP.)

12.5 TON (SCROLL)

QUANTITY PER UNIT (12" X 24" X 2" or 4”)

QUANTITY PER UNIT (16" X 20" X 2" or 4”)

QUANTITY PER UNIT (16" X 25" X 2" or 4”)

QUANTITY PER UNIT (18" X 24" X 2" or 4”)

TOTAL FACE AREA (Sq. Ft.)

FILTERS

CHARGE

17/8

8/8

1900

2100

2140

18/0

2291

2491

2531

SYSTEM No.1

SYSTEM No. 2

COOLING ONLY

18/0

2100

2300

2340

160

REFRIGERANT

22 (Lb./Oz.)

BASIC UNIT

N24

N32

GAS / ELECTRIC

ECONOMIZER

ECONOMIZER WITH

POWER EXHAUST

245

MOTORIZED DAMPER

150

18 KW

36 KW

54 KW

72 KW

ELECTRIC HEATER

OPERATING

WEIGHTS

(LBS.)

HOT GAS BYPASS

SUPPLY FAN VFD

ROOF CURB

See Table 24

175

200

185

220

BAROMETRIC DAMPER

ECONOMIZER / MOTORIZED

DAMPER RAIN HOOD

ECONOMIZER / POWER

EXHAUST RAIN HOOD

WOOD SKID

220

1. This compressor will be energized first.

Unitary Products Group

262259-YTG-B-0107

TABLE 24: SUPPLY FAN VFD WEIGHTS, IN LBS.

TABLE 25: ELECTRIC HEAT CORRECTION

FACTORS

SUPPLY FAN MOTOR

230V

460V

575V

NOMINAL VOLTAGE

VOLTAGE

kW CAP. MULTIPLIER

W/O MANUAL BYPASS

208

230

460

575

1.00

0.92

5.0 hp

7.5 hp

208

240

480

600

10.0 hp

15.0 hp

W/MANUAL BYPASS

5.0 hp

7.5 hp

10.0 hp

15.0 hp

CONTROL WIRING

COOLING / HEATING (24 VOLT THERMOSTAT)

THERMOSTAT¹

TERMINALS

UNIT TERMINAL

BLOCK 1TB²

COOLING ONLY (24 VOLT THERMOSTAT)

THERMOSTAT¹

TERMINALS

UNIT TERMINAL

BLOCK 1 TB²

ADD

JUMPER

ADD

JUMPER

24 VOLT

TRANSFORMER

¹24 Volt Thermostat 2TH04701024 or 2TH04701524

(with Subbase 2TB04700324).

LED1

24 VOLT

TRANSFORMER

LED2

NOT USED

²Terminal strip 1TB - located on relay board in 24-volt section

of the unit control box.

COM

³Second stage heating is not required on units with a single stage

electric heater.

ADD

JUMPER

POWER WIRING

Refer to the

TO REMOTE SENSOR

2THO4702224 IF USED

LINE VOLTAGE

TERMINAL

BLOCK 2TB

ELECTRICAL DATA

tables to size the

power wiring, the

fuses and the

¹Electronic programmable thermostat 2ET04700224 (includes subbase).

²Terminal block 1TB- located on relay board in 24-volt section of the unit control box.

³Second stage heating is not required on units with a single stage electric heater.

⁴Terminals A1 and A2 provide a relay output to close the outdoor economizer dampers

when the thermostat switches to the set-back position.

IN CONTROL BOX

disconnect switch.

GROUND LUG

NOTE: Fans switch must be in "ON" position for minimum ventilation during heater operation.

FIGURE 3 - TYPICAL DM FIELD WIRING DIAGRAM

Unitary Products Group

262259-YTG-B-0107

BLOWER ACCESS

(Location Of

Optional VFD)

ECONOMIZER / MOTORIZED DAMPER,

FIXED OUTDOOR INTAKE AIR AND

POWER EXHAUST RAIN HOODS

(See detail "Y")

FIELD-SUPPLIED

BLOWER MOTOR ACCESS

(Location Of Optional

VFD Bypass)

DISCONNECT SWITCH

COMPRESSOR

ACCESS

LOCATION

BLOWER

COMPARTMENT

ACCESS

(Auxiliary)

COIL

GUARD

DOT PLUG

(For pressure

Drop Reading)

48-5/8"(15 TON)

52-5/8" (20, 25 TON)

ELECTRIC/

GAS HEAT

ACCESS

CONDENSER

COILS

VENT AIR

OUTLET

HOODS

21"

7-1/8"

COMBUSTION

AIR INLET

HOOD

6-3/8"

9-3/4"

5-7/8"

92"

)

(C)

(A)

GAS SUPPLY

ENTRY

CONTROL WIRING

ENTRY

46-5/8"

CONTROL BOX

ACCESS

11-1/2"

(B)

35"

POWER WIRING

ENTRY

BOTTOM SUPPLY

AND RETURN

AIR OPENINGS

(See Note)

FRONT

VIEW

RETURN

AIR

3-3/4"

33"

SUPPLY

AIR

2-3/4" 21-1/2"

11-1/8"

All dimensions are in inches. They are

subject to change without notice. Certified

dimensions will be provided upon request.

UNIT BASE WITH RAILS

(B)

(D)

Shown separately to illustrate

Bottom Duct openings, Power

and Gas Piping Connection

locations

POWER WIRING

ENTRY

GAS SUPPLY

ENTRY

(A)

CONTROL WIRING

ENTRY

8-1/8"

NOTE:

46-5/8"

For curb mounted units, refer to the curb hanger

dimensions of the curb for the proper size of the

supply and return air duct connections.

9-1/4"

12-1/2"

9-3/4"

FIGURE 4 - UNIT DIMENSIONS & CLEARANCES 15, 20 & 25 TON

TABLE 26: UTILITIES ENTRY DATA

OPENING SIZE

HOLE

USED FOR

(DIA.)

1-1/8” KO

Side

Bottom

Side

Control Wiring

3/4” NPS (Fem.)

3-5/8” KO

Power Wiring

3” NPS (Fem.)

Bottom

2-3/8” KO

Gas Piping (Front)

1-11/16” Hole

Gas Piping (Bottom)

1. One-inch gas piping NPT required.

2. Opening in the bottom of the unit can be located by the slice in

the insulation.

NOTE: All entry holes should be field sealed to prevent rain

water entry into the building.

Unitary Products Group

262259-YTG-B-0107

EVAPORATOR

SECTION

DOT PLUG

(For pressure

drop reading)

40-3/8"

FILTER

ACCESS

SUPPLY

AIR

RETURN

AIR

COMPRESSOR

ACCESS

OUTDOOR

AIR

40-1/2"

SUPPLY AIR

ACCESS

18-5/8"

1" NPT FEMALE

COND. DRAIN

CONNECTION

27-3/4"

Dimensions listed are for side

5-1/8"

RETURN AIR

ACCESS

duct flange openings; see

Field Accessories for Side

Duct Flange Kit.

OUTDOOR AIR

COMPARTMENT

ACCESS

28-5/8” (15 TON)

39-5/8" (20, 25 TON)

REAR

VIEW

FIGURE 5 - REAR VIEW DIMENSIONS

NOTE:Units are shipped with the bottom duct openings

covered. An accessory flange kit is available for

connecting side ducts.

For bottom duct applications:

For side duct applications:

1. Remove the side panels from the supply and return air

compartments to gain access to the bottom supply and

return air duct covers.

1. Replace the side panels on the supply and return air

compartments with the side duct flange accessory kit

panels.

2. Remove and discard the bottom duct covers. Duct

openings are closed with sheet metal covers except

when the unit includes a power exhaust option. The

covering consists of a heavy black paper composition.

2. Connect ductwork to the flanges on those panels.

3. Replace the side supply and return air compartment

panels.

Unitary Products Group

262259-YTG-B-0107

NOTE: ELEC / ELEC Models: Units and ductwork are

TABLE 27: MINIMUM CLEARANCES

approved for zero clearance to combustible material

when equipped with electric heaters.

LOCATION

CLEARANCE

36”

Front

24” (Less Economizer)

49” (With Economizer)

Rear

GAS / ELEC Models: A 1” clearance must be

provided between any combustible material and the

supply air ductwork for a distance of 3 feet from the

unit.

24” (Less Economizer)

Left Side (Filter Access)

Right Side (Cond. Coil)

36” (With Economizer)

36”

0”

Below Unit

The products of combustion must not be allowed to

accumulate within a confined space and recirculate.

72” With 36” Maximum

Horizontal Overhang (For

Condenser Air Discharge)

Above Unit

Locate unit so that the vent air outlet hood is at least:

1. Units may be installed on combustible floors made from wood or

class A, B, or C roof covering material.

• Three (3) feet above any force air inlet located

within 10 horizontal feet (excluding those integral to

the unit).

2. Units must be installed outdoors. Overhanging structures or

shrubs should not obstruct condenser air discharge outlet.

3. If economizer is factory installed, the unassembled rain hood

must be removed from its ride along position in front of evapora-

tor coil, or in the outdoor air compartment, prior to final installa-

tion.

• Four (4) feet below, four horizontal feet from, or one

foot above any door or gravity air inlet into the

building.

• Four (4) feet from electric and gas meters,

regulators and relief equipment.

ECONOMIZER

MOTORIZED

DAMPER

POWER EXHAUST

RAIN HOOD

(on Return Air Compartment)

SUPPLY AIR

COMPARTMENT

RAIN HOOD

ECONOMIZER / MOTORIZED DAMPER

AND POWER EXHAUST RAIN HOODS

(on Outdoor Air Compartment)

FIXED

OUTDOOR AIR

INTAKE HOOD

(located on

Return Air

Compartment)

36-5/8”

1“ CONDENSATE

DRAIN

(Must be trapped)

16-1/8”

5”

28-3/16”

92”

REAR VIEW

LH VIEW

DETAIL “Y”

UNIT WITH RAIN HOODS

FIGURE 6 - UNIT DIMENSIONS DM180, 240 & 300 (RAINHOOD)

Unitary Products Group

262259-YTG-B-0107

FIGURE 7 - CENTER OF GRAVITY

FIGURE 8 - TYPICAL UNIT APPLICATIONS

Unitary Products Group

262259-YTG-B-0107

FIGURE 9 - FOUR AND SIX POINT LOADS

TABLE 28: FOUR AND SIX POINT LOADS

Total

4 Point Loads (lbs)

Unit Size

Shipping

Weight

180 Gas

240 Gas

300 Gas

180 Elec

240 Elec

300 Elec

2300

2500

2531

2100

2300

2331

539

538

593

492

295

546

563

645

514

517

594

612

715

674

558

658

621

586

684

619

536

630

570

Total

6 Point Loads (lbs)

Unit Size

Shipping

Weight

180 Gas

240 Gas

300 Gas

180 Elec

240 Elec

300 Elec

2300

2500

2531

2100

2300

2331

351

334

390

320

307

359

367

350

412

335

322

379

392

426

436

358

392

402

416

502

456

380

462

420

399

481

430

364

442

396

375

407

343

375

Unitary Products Group

262259-YTG-B-0107

MIN. ROOF OPENING:

SUPPLY AIR*

BACK OF UNIT

39-7/8" WIDE X 61-7/8" Long

OUTDOOR COIL

END OF UNIT

RETURN AIR*

DUCT SUPPORT RAILS

22-3/4"

33-1/8"

14-1/4" (15 Ton)

25-1/4" (20, 25 Ton)

35-7/8"

84"

115-5/16" (15 Ton)

126-1/4" (20, 25 Ton)

*Supply and Return Air (including duct support rails)

as shown, are typical for bottom duct applications.

DUCT SIZES:

Supply Air = 22-1/2" x 35-5/8"

Return Air = 32-7/8" x 35-5/8"

FRONT

For location of horizontal duct applications

(on back of unit), refer to Unit Dimension details.

UNIT

FIGURE 10 -UNIT ROOF CURB DIMENSIONS

2. The 58-1/2” overall dimension of the ducts allows duct-

work penetration between roof joists that are spaced on

72” centers.

NOTE: Ducts can be installed into the curb from the roof. All

electrical and gas line connections can be made

inside the curb.

FIGURE 11 -ROOF CURB DUCT OPENINGS

DIMENSION

1. The 2” space between the ducts allows for “jumping” an

existing roof joist.

Unitary Products Group

262259-YTG-B-0107

THERMOSTAT

TERMINALS

CONTROL

TERMINAL

BLOCK

OCC

Smoke

Detector

Jumper ³

OCC

24 VAC

Class 2

TERMINALS ON

A LIMITED

NUMBER OF

THERMOSTATS

Second stage heating not required on single stage heating units.

Second stage cooling not required on single stage cooling units.

Jumper is required if there is no Smoke Detector circuit.

Jumper is required for any combination of R, RC, or RH.

OCC is an output from the thermostat to indicate the Occupied condition.

X is an input to the thermostat to display Error Status conditions.

FIGURE 13 -TYPICAL S implicity® CONTROL WIRING DIAGRAM

Unitary Products Group

262259-YTG-B-0107

ment. All unit wiring shall be both numbered and color coded.

All units shall be manufactured in a facility certified to ISO

9001 standards and the cooling performance shall be rated in

accordance with DOE and ARI test procedures. Units shall be

CGA listed, classified to ANSIZ21.47 standards, UL 1995/

CAN/CSA No. 236-M90 conditions.

GUIDE SPECIFICATIONS

GENERAL

Units shall be manufactured by York International Unitary

Products Group in an ISO 9001 certified facility.

York's Sunline 2000™ units are convertible single package

units. All models have dual independent refrigerant circuits

for efficient part load operation and maximum comfort control.

Although the units are primarily designed for curb mounting

on a roof, they can also be slab-mounted at ground level or

set on steel beams above a finished roof. Cooling only, cool-

ing with gas heat and cooling with electric heat models are

available with a wide variety of factory-mounted options and

field-installed accessories to make them suitable for almost

every application. All units are self-contained and assembled

on full perimeter base rails with holes in the four corners for

overhead rigging. Every unit is completely piped, wired,

charged and tested at the factory to simplify the field installa-

tion and to provide years of dependable operation. All models

(including those with an economizer) are suitable for either

bottom or horizontal duct connections. Models with power

exhaust are suitable for bottom duct connections only. For

bottom duct, remove the sheet metal panels from the supply

and return air openings through the base of the unit. For hori-

zontal duct, replace the supply and return air panels on the

rear of the unit with a side duct flange accessory. All supply

air blowers are equipped with a belt drive that can be

UNIT CABINET

Unit cabinet shall be constructed of G90 galvanized steel, with

exterior surfaces coated with a non-chalking, powdered paint

finish, certified at 1000 hours salt spray test per ASTM-B117

standards. Indoor blower section shall be insulated with a min-

imum 1/2" thick insulation, coated on the airside. Aluminum

foil faced insulation shall be used in the furnace compartment

and be fastened with ridged fasteners to prevent insulation

from entering the air stream. Cabinet panels shall be "large"

size, easily removable for servicing and maintenance. Full

perimeter base rails shall be provided to assure reliable transit

of equipment, overhead rigging and proper sealing on roof

curb applications. Disposable 2" filters shall be furnished and

be accessible through a removable access door, sealed air-

tight. Units filter track shall be designed to accommodate

either 2" or 4" filters. Fan performance measuring ports shall

be provided on the outside of the cabinet to allow accurate air

measurements of evaporator fan performance without remov-

ing panels or creating air by-pass of the coils. Condensate

pan shall be internally sloped and conform to ASHRAE 62-89

self-draining standards. Condensate connection shall be a

minimum of 1" I.D. female and be a ridged mount connection.

Unit shall incorporate a fixed outdoor air damper with an out-

door air intake opening covered with a bird screen and a rain

hood painted to match the exterior of the unit.

adjusted to meet the exact requirements of the job.

Each unit shall have 2 condenser fan motors. A high speed

drive accessory is available for applications with a higher

CFM and/or static pressure requirement. All compressors

include crankcase heat and internal pressure relief. Every

refrigerant circuit includes an expansion valve, a liquid line fil-

ter-drier, a discharge line high pressure switch and a suction

line with a freezestat and low pressure/loss of charge switch.

The unit control circuit includes a 75 VA transformer, a 24-volt

circuit breaker and a relay board with two compressor lockout

circuits, a terminal strip for thermostat wiring, plus an addi-

tional set of pin connectors to simplify the interface of addi-

tional field controls. All units have long lasting powder paint

cabinets with 1000 hour salt spray test approval under

ASTM-B117 procedures. All models are CSA approved. All

models include a 1-year limited warranty on the complete

unit. Compressors and electric heater elements carry an

additional 4-year warranty. Aluminized steel tubular heat

exchangers carry an additional 9-year warranty.

INDOOR (EVAPORATOR) FAN ASSEMBLY

Fan shall be a belt drive assembly and include an adjustable-

pitch motor pulley. Job site selected (B.H.P.) brake horse-

power shall not exceed the motors nameplate horsepower

rating, plus the service factor. Units shall be designed not to

operate above service factor. Fan wheel shall be double-inlet

type with forward-curved blades, dynamically balanced to

operate smoothly throughout the entire range of operation.

Airflow design shall be constant air volume.

A variable air volume (VAV) option using a variable frequency

drive (VFD) is available for applications requiring a constant

supply duct static pressure. Units equipped for VAV shall be

controlled by a duct pressure transducer with a 0 - 5” WC

pressure range. The pressure transducer shall provide a 0 - 5

VDC output signal to a VAV control board which, in turn shall

provide a 2 - 10 VDC speed reference signal to the VFD.

Units equipped with VFD’s shall have factory-installed man-

ual bypass as an option.

DESCRIPTION

Units shall be factory-assembled, single packaged, DM***N

Electric Cooling/Gas Heat, DM***C/E Electric Cooling/

Optional Electric Heat, designed for outdoor mounted instal-

lation. The 15, 20 and 25 ton units shall have minimum EER

ratings of 8.5.

OUTDOOR (CONDENSER) FAN ASSEMBLY

The outdoor fans shall be of the direct-driven propeller type,

discharge air vertically, have aluminum blades riveted to cor-

rosion resistant steel spider brackets and shall be dynami-

cally balanced for smooth operation. The 2 outdoor fan

motors shall be totally enclosed with permanently lubricated

They shall have built-in field convertible duct connections for

down discharge supply/return or horizontal discharge supply/

return, and be available with factory installed options or field

installed accessories. The units shall be factory wired, piped,

charged with R-22 refrigerant and factory tested prior to ship-

Unitary Products Group

262259-YTG-B-0107

bearings, internally protected against overload conditions and

staged independently.

diagnostic code that indicates which safety

switch has tripped.

REFRIGERANT COMPONENTS

d. Unit shall incorporate "AUTO RESET" compressor

over temperature, over current protection.

Compressors:

e. Unit shall operate with conventional thermostat

designs and have a low voltage terminal strip for

easy hook-up.

a. Shall be Scroll (25T only) compressors internally

protected with internal high-pressure relief and over

temperature protection.

f. Unit control board shall have on-board diagnostics

and fault code display.

b. Shall have internal spring isolation and sound muf-

fling to minimize vibration and noise, and be exter-

nally isolated on a dedicated, independent

mounting.

g. Standard controls shall include anti-short cycle and

low voltage protection, and permit cooling operation

down to 0 °F.

Coils:

h. Control board shall monitor each refrigerant safety

switch independently.

a. Evaporator and condenser coils shall have alumi-

num plate fins mechanically bonded to seamless

internally enhanced copper tubes with all joints

brazed. Special Phenolic coating shall be available

as a factory option.

Control board shall retain last 5 fault codes in non

volatile memory, which will not be lost in the event of

a power loss.

b. Evaporator and Condenser coils shall be of the

direct expansion, draw-thru, design.

GAS HEATING SECTION (DM***N MODELS)

Shall be designed with induced draft combustion with post

purge logic and energy saving direct spark ignition, redun-

dant main gas valve. Ventor wheel shall be constructed of

stainless steel for corrosion resistance. The heat exchanger

shall be of the tubular type, constructed of T1-40 aluminized

steel for corrosion resistance and allowing minimum mixed

air entering temperature of 25° F. Burners shall be of the in-

shot type, constructed of aluminum coated steel and contain

air mixture adjustments. All gas piping shall enter the unit

cabinet at a single location through either the side or curb,

without any field modifications. An integrated control board

shall provide timed control of evaporator fan functioning and

burner ignition. Heating section shall be provided with the fol-

lowing minimum protection:

Refrigerant Circuit and Refrigerant Safety Components shall

include:

a. Balance-port thermostatic expansion valve with

independent circuit feed system.

b. Filter drier/strainer to eliminate any moisture or for-

eign matter.

c. Accessible service gage connections on both suc-

tion and discharge lines to charge, evacuate, and

measure refrigerant pressure during any necessary

servicing or troubleshooting, without losing charge.

d. The refrigeration system shall provide at least 15° F

of sub-cooling at design conditions.

a. Primary and auxiliary high-temperature limit

switches.

e. All models shall have two independent circuits.

f. Hot gas bypass option shall be factory-installed on

compressor #1 discharge line to provide cooling in

low-load applications. HGBP shall be a standard

feature on VAV models and an optional feature on

CV models.

b. Induced draft motor speed sensor.

c. Flame roll out switch (automatic reset).

d. Flame proving controls. Unit shall have two inde-

pendent stages of capacity.

UNIT CONTROLS

ELECTRIC HEATING (DM***C/E MODELS)

a. Unit shall be complete with self-contained low-volt-

age control circuit protected by a resettable circuit

breaker on the 24-volt transformer side.

Nickel chromium electric heating elements shall be provided

as required by the application with 1 or 2 stage control, as

required, from 13.5 KW to 72 KW capacities. The heating

section shall have a primary limit control(s) and automatic

reset to prevent the heating element system from operating

at an excessive temperature. Units with Electric Heating shall

be wired for a single point power supply with branch circuit

fusing (where required).

b. Unit shall incorporate a lockout circuit which pro-

vides reset capability at the space thermostat or

base unit, should any of the following standard

safety devices trip and shut off compressor.

c. Loss-of-charge/Low-pressure switch.

1. High-pressure switch.

UNIT OPERATING CHARACTERISTICS

Unit shall be capable of starting and running at 125° F

outdoor temperature, exceeding maximum load criteria of

ARI Standard 340/360. The compressor, with standard

controls, shall be capable of operation down to 0° F outdoor

2. Freeze-protection thermostat, evaporator coil. If

any of the above safety devices trip, a LED

(light-emitting diode) indicator shall flash a

Unitary Products Group

262259-YTG-B-0107

temperature. Unit shall be provided with fan time delay to

prevent cold air delivery before heat exchanger warms up

(Gas heat only).

OTHER PRE-ENGINEERED ACCESSORIES AVAILABLE

•

ROOF CURB - 14" high, full perimeter curb with wood

nailer (shipped knocked-down).

ELECTRICAL REQUIREMENTS

•

100% BAROMETRIC RELIEF DAMPER - Contains a

rain hood, air inlet screen, exhaust damper and mount-

ing hardware. Used to relieve internal air pressure

through the unit.

All unit power wiring shall enter unit cabinet at a single factory

provided location and be capable of side or bottom entry, to

minimize roof penetrations and avoid unit field modifications.

Separate side and bottom openings shall be provided for the

control wiring.

•

PROPANE CONVERSION KIT - Contains new orifices

and gas valve parts to convert from natural to L.P. gas.

One per unit required.

STANDARD LIMITED WARRANTIES

HIGH ALTITUDE - NATURAL GAS - Contains orifices

required for applications between 2000 and 6000 feet

altitude.

•

Compressor 5 Years

Heat Exchanger 10 Years

Electric Heat Element 5 Years

Other Parts 1 Year

HIGH ALTITUDE - PROPANE GAS - Contains orifices

required for applications between 2000 and 6000 feet

altitude. Must be used with propane conversion kit.

OPTIONAL OUTDOOR AIR (Shall be made available by

either/or):

BURGLAR BARS - Designed to work with above roof

curbs, depending on unit model. Fits duct openings of

curb supply and return air openings.

•

ELECTRONIC ENTHALPY AUTOMATIC ECONO-

MIZER - Outdoor and return air dampers that are inter-

locked and positioned by a fully-modulating, spring-

return damper actuator. The maximum leakage rate for

the outdoor air intake dampers shall not exceed 2%

when dampers are fully closed and operating against a

pressure differential of 0.5 IWG. A unit-mounted potenti-

ometer shall be provided to adjust the outdoor and return

air damper assembly to take in CFM of outdoor air to

meet the minimum ventilation requirement of the condi-

tioned space during normal operation. During econo-

mizer operation, a mixed-air temperature control shall

modulate the outdoor and return air damper assembly to

prevent the supply air temperature from dropping below

55°F. Changeover from compressor to economizer oper-

ation shall be provided by an integral electronic enthalpy

control that feeds input into the basic module. The out-

door intake opening shall be covered with a rain hood

that matches the exterior of the unit. Water eliminator/fil-

ters shall be provided. Simultaneous economizer/com-

pressor operation is also possible. Dampers shall fully

close on power loss.

SIDE DUCT FLANGE - Supply and return air duct

flanges for side duct applications. Do not use on units

with power exhaust.

HIGH SPEED DRIVE - Includes blower pulley and belt

for higher CFM and/or static pressure requirements.

•

WOOD SKID - Allows unit to be handled with 90" forks.

ECONOMIZER/MOTORIZED DAMPER RAIN HOOD

(DMN/E/C300 only) - Contains all hood panels and the

hardware for assembling.

•

ANTI-RECYCLE TIMER - Assures 5-minute off time

between compressor cycles.

COIL GUARD KIT - Guard for cooling coil.

OTHER FACTORY INSTALLED OPTIONS

•

POWER EXHAUST OPTION - To work in conjunction

with economizers.

•

STAINLESS STEEL HEAT EXCHANGER

STAINLESS STEEL DRAIN PAN

•

MOTORIZED OUTDOOR AIR DAMPERS - Outdoor and

return air dampers that are interlocked and positioned by

a 2-position, spring-return damper actuator. The maxi-

mum leakage rate for the outdoor air intake dampers

shall not exceed 2% when dampers are fully closed and

operating against a pressure differential of 0.5 IWG. A

unit-mounted potentiometer shall be provided to adjust

the outdoor and return air damper assembly to take in

the design CFM of outdoor air to meet the ventilation

requirements of the conditioned space during normal

operation. Whenever the indoor fan motor is energized,

the dampers open up to one of two pre-selected posi-

tions - regardless of the outdoor air enthalpy. Dampers

return to the fully closed position when the indoor fan

motor is de-energized. Dampers shall fully close on

power loss.

TECHNICOAT PHENOLIC COATED CONDENSER

AND EVAPORATOR COIL

•

ELECTRONIC SINGLE ENTHALPY ECONOMIZER

DIRTY FILTER SWITCH

PHASE MONITOR

COIL GUARD

POWERED GFI CONVENIENCE OUTLET

NON-POWERED GFI CONVENIENCE OUTLET

BAS CONTROLS (S implicity® INTELLI-Comfort™ CPC,

JOHNSON, HONEYWELL, NOVAR)

•

BAS READY ECONOMIZER (BELIMO ACTUATOR

WITHOUT A CONTROLLER)

Unitary Products Group

•

HINGED FILTER DOOR ACCESS AND TOOLESS

ACCESS PANELS

•

4" PLEATED FILTERS

DISCONNECT SWITCH

•

HIGH SPEED DRIVE

SUPPLY AIR SMOKE DETECTOR

RETURN AIR SMOKE DETECTOR

2" THROW AWAY FILTERS

Subject to change without notice. Printed in U.S.A.

262259-YTG-B-0107

Supersedes: 262259-YTG-A-0706

Unitary

Products

Group

5005

York

Drive

Norman

73069

Lexmark 436 User Manual
Lexmark Prospect Pro205 User Manual
Oreck Proshield Air Purifier User Manual
Schumacher Cm 1 User Manual
Sharp Af R80ex User Manual
Sharp Af R120cx User Manual
Sunbeam Sca103rwb1 User Manual
Toshiba Air Conditioner Rav Sm562at E User Manual
Toshiba Air Conditioner Rav Sm1106bt Tr User Manual
White Rodgers Air Conditioner 57t01 843 User Manual