Tekkeon Mp1280 User Manual

MP1280 User Guide  
Overview  
myPowerfor iPhone® 4, the ultra slim  
rechargeable battery case for iPhone 4, lets  
you talk, rock, view, share, and stay connected  
longer. This compact battery case doubles as  
a dock for automatic syncing, and as a case  
to protect your iPhone 4 from everyday wear  
and tear.  
Equipped with an efficient lithium polymer  
battery, myPower for iPhone 4 preserves your  
iPhone 4 battery by bypassing the battery and  
directly powering (rather than charging) your  
iPhone 4. When plugged into a USB power  
adapter or computer USB port, myPower for  
iPhone 4 will charge itself and the connected  
iPhone 4 battery. A bright dual-color LED shows  
the capacity level at a quick glance.  
With its highly innovative  
eSwaptechnology,  
myPower for iPhone 4  
lets you exchange the  
battery module on the  
go. That way, you can  
have extra battery packs  
at your fingertips, so  
you’re not limited by  
the capacity of a single  
external battery.  
USER GUIDE  
1
Getting Started  
Unpacking myPower for iPhone 4  
Your myPower for iPhone 4 package includes  
the following:  
User guide (not shown)  
myGuardprotector set (not shown)  
myPower for iPhone 4  
Micro USB cable  
2
MP1280  
Getting to Know myPower for iPhone 4  
Raised edge for iPhone 4  
surface protection  
Replaceable  
battery module  
Control  
module  
On/off switch  
preserves  
power  
Micro USB port  
for charging  
and automatic  
syncing  
Capacity indicator  
shows remaining  
power at a glance  
USER GUIDE  
3
Using myPower for iPhone 4  
Use myPower for iPhone 4 to power your  
iPhone 4, or to charge your iPhone 4 while  
connected to external power. myPower for  
iPhone 4 bypasses the iPhone 4 battery to  
power (not charge) your iPhone 4, thus  
extending the overall life of the iPhone 4 battery.  
The battery will not charge iPhone 4 unless  
connected to an external power source.  
myPower for iPhone 4 is charged in two ways:  
by connecting to external power via a USB  
power adapter, or by connecting to a computer  
USB port. You use the included micro USB  
cable to charge the device. If you are using  
an iPhone 4-compliant USB power adapter, you  
may charge your iPhone 4 at the same time by  
inserting the iPhone 4 in the case.  
As a bonus feature, myPower for iPhone 4  
doubles as a dock to sync your iPhone 4 to your  
computer when connected via the micro USB  
cable. In this case, myPower for iPhone 4 will  
both sync and charge your iPhone 4.  
Adhering myGuard Protector  
Your myPower for iPhone 4 includes a myGuard  
protector set to protect the front and back of  
your iPhone 4. As it is possible the back of the  
iPhone 4 could be scratched if dust or other ele-  
ments were to get caught between the battery  
4
MP1280  
case and the iPhone 4 back, it is very important  
that you adhere the protector onto the back of  
your iPhone 4. This will prevent any scratches  
on the back when the iPhone 4 is in or out of our  
battery case. Additional myGuard protectors are  
1. Ensure that your iPhone 4 is free of dust.  
2. Holding the red label  
peel the first  
,
backing from the myGuard protector.  
3. Position and adhere myGuard to the back of  
your iPhone 4.  
4. Run your hand across the back to smooth  
out any bubbles.  
5. Holding the black label , peel the second  
backing from the myGuard protector.  
6. Repeat steps 1 through 5 to adhere the  
myGuard protector to the front of your iPhone 4.  
Placing Your iPhone 4 into the Battery Case  
1. Holding the control module, gently pull the  
battery module from the control module to  
separate the two pieces.  
2. Slide your iPhone 4 into the control  
module, ensuring that it is fully docked  
onto the 30-pin connector in the bottom  
of the module.  
USER GUIDE  
5
3. Slide the battery module down over your  
iPhone 4 until it snaps into place.  
4. When you’re ready to use the battery,  
slide the On/Off switch to the On position  
(to the right). The battery icon on your  
iPhone 4 will change to  
to indicate  
your iPhone 4 is being externally powered.  
5. Use your iPhone 4 as you would  
normally. The iPhone 4 battery  
will not be used while  
iPhone 4 is in the case  
until myPower for  
iPhone 4 is empty, or  
you slide the power  
switch to off.  
Notes: The On/Off switch functions only when  
your iPhone 4 is in the battery case. When your  
iPhone 4 is not in the battery case, power is  
disabled so the battery will not slowly drain.  
To maximize your myPower for iPhone 4 battery  
power, turn off myPower for iPhone 4 if your  
iPhone 4 will be in standby mode for an  
extended period (such as overnight).  
6
MP1280  
Removing Your iPhone 4 from the Battery Case  
1. Gently pull the battery module from the  
control module to separate the two pieces.  
2. Slide your iPhone 4 away from the 30-pin  
connector in the control module.  
3. To store myPower for iPhone 4, slide the  
battery module onto the control module until  
it snaps into place or store the two pieces  
separately.  
Viewing the Battery Capacity  
When your iPhone 4 is in the battery case, the  
Capacity Indicator on the end of myPower for  
iPhone 4 will indicate the remaining battery  
capacity as follows:  
Blue  
Red  
20%-100%  
1%-20%  
When the Capacity Indicator turns to red,  
recharge the battery.  
Charging myPower for iPhone 4  
An empty myPower for iPhone 4 will charge  
in about 3 hours using an iPhone 4-compliant  
power adapter. Both empty batteries  
(your iPhone 4 and myPower for iPhone 4)  
can be charged in about 6 hours.  
USER GUIDE  
7
1. With or without your iPhone 4 inserted in  
the battery case, connect the micro USB  
connector to the micro USB port on  
myPower for iPhone 4.  
2. Connect the USB connector to a wall outlet  
using a USB power adapter or to a computer  
USB port.  
The battery capacity indicator will turn to  
red to indicate myPower for iPhone 4 is  
being charged. If connected, your iPhone 4  
battery icon will change to  
to indicate  
your iPhone 4 is being charged.  
3. The capacity indicator will change from red  
to blue, to indicate that myPower for iPhone 4  
is at least 80% charged. Continue to charge  
for one hour.  
4. Unplug the micro USB cable from your  
myPower for iPhone 4 when the battery is  
fully charged (3 hours without iPhone 4 or  
6 hours with iPhone 4).  
ChARGinG indiCAtoR  
Color  
Battery Capacity  
Red  
1% - 80%  
Blue  
80% - 100%  
8
MP1280  
Note: If you are charging iPhone 4 at the same  
time, you must use an iPhone 4-compliant  
USB adapter.  
Syncing Your iPhone 4  
The intelligent design of myPower for iPhone 4  
enables you to sync your iPhone 4 while  
charging it via a USB port on your computer.  
1. With your iPhone 4 inserted in the battery  
case, connect the micro USB connector to the  
micro USB port on myPower for iPhone 4.  
2. Connect the USB connector to a USB port on  
a computer. Your iPhone 4 will automatically  
sync with your computer (if automatic  
syncing for iPhone is enabled).  
Storing myPower for iPhone 4  
Lithium-ion/polymer batteries must be used  
consistently for maximum performance.  
Therefore, if you do not use the battery often,  
once a month discharge and recharge the battery  
to 40% (if it will be transported) or 70% (for long  
term storage). Store the battery in a cool and dry  
environment at a temperature between 50° and  
86°F (10° and 30°C). You may permanently  
damage your battery by storing the battery  
without any capacity in the cell. It is important  
that you do not leave the battery in the interior of  
a vehicle parked in the sun, or exposed to direct  
sunlight for extended periods of time.  
USER GUIDE  
9
Prolonging Battery Life  
Extreme heat and cold will affect your battery’s  
performance. At temperatures above 80°F  
(27°C), the battery will discharge more quickly,  
and in colder temperatures, the battery won’t  
charge well. Therefore, it is recommended that  
the battery is used at room temperature, or  
between 68°F to 77°F (20°C to 25°C), and is  
not used in temperatures outside the range of  
temperatures between 32°F to 104°F (0°C to  
40°C). It is not recommended that the battery  
is charged in temperatures above 104°F (40°C),  
and the battery may be permanently damaged  
if you use your battery in temperatures higher  
than 140°F (60°C). You may damage the  
battery even more if you charge the device in  
these temperatures.  
You may find that using the battery in a very  
cold environment decreases the battery capacity.  
Unlike the effects of a hot environment, this is a  
temporary condition. Once warmed, the battery  
will return to its previous capacity.  
Swapping Battery Modules  
Optional replaceable battery modules are  
available for your myPower for iPhone 4.  
You can choose from the Ultra Slim battery to  
add many more hours to your iPhone 4, or our  
10  
MP1280  
Ultra Power battery which more than doubles  
your work or play time on your iPhone 4.  
1. With the iPhone 4 in the battery case, gently  
pull the battery module from the control  
module and iPhone 4.  
2. Slide the new battery module down over your  
iPhone 4 until it snaps into place.  
Note: You must charge your extra battery before  
swapping it while on the go.  
Troubleshooting  
If myPower for iPhone 4 does not power  
iPhone 4, take these steps:  
1. Confirm that the On/Off switch is in the On  
position (to the right).  
2. With the iPhone 4 inserted in the battery  
case, check the Capacity Indicator to verify  
that myPower for iPhone 4 is charged  
(capacity indicator is blue).  
3. Verify that your iPhone 4 is properly docked  
into the 30-pin connector at the bottom of  
the battery case and the battery module is  
snapped securely into the control module.  
USER GUIDE  
11  
Accessories  
The following accessories for myPower for  
iPhone 4 can be ordered at the Tekkeon online  
store at www.tekkeon.com:  
Ultra Slim Replaceable Battery MP1280-12  
Ultra Power Replaceable Battery MP1280-22  
myCharger USB Power Adapter MP1650-40  
Safety Precautions  
Do not shake, drop, or throw the battery.  
(Avoid rough handling, or excessive shock  
and vibration.)  
• Do not puncture or crush the battery.  
• Do not burn or short circuit the battery.  
• If any of the above occur, or if it fails to power  
your device, stop using or charging the battery.  
• In the rare case the battery swells, stop using  
or charging the battery and immediately  
contact Tekkeon at [email protected]  
or 888-787-5888.  
• Never attempt to disassemble or reassemble  
the battery.  
• Discharge/recharge the battery once a month.  
• Do not dispose of in fire or water.  
• Recycle or properly dispose of the battery.  
12  
MP1280  
LimitedWarranty  
The product enclosed herein is warranted to be free of  
operational defects for a period of one year from the  
date of purchase. In the event of a defect in operation  
during the warranty period Tekkeon, Inc. will replace  
the defective product when the owner returns all prod-  
uct contents. The limited warranty will be considered  
void if the unit is tampered with, subject to misuse,  
negligence or accidental damage, has been improperly  
serviced, or if the security seal is removed. This war-  
ranty is limited to replacement only and shall not cover  
any other damages.  
Any product returned to Tekkeon, Inc. with no fault  
found will be returned to the owner at the owner’s  
expense. To obtain warranty coverage, please  
complete and submit the enclosed registration card.  
disclaimer of Warranties  
Any user of this product does so at the user’s own risk.  
To the maximum extent permitted by applicable law,  
Tekkeon, Inc. and its suppliers provide the hardware  
and any support services related thereto “as is” and  
with all faults; and hereby disclaim all warranties and  
conditions, whether express, implied or statutory,  
including, but not limited to implied warranties of  
merchantability, fitness for a particular purpose, non-  
infringement, lack of negligence or correspondence  
to description, except for those warranties specifically  
and expressly provided in the Limited Warranty. With  
respect to the use of this product, in no event shall the  
company be liable for any loss of profit or any other  
commercial damage, including but not limited to  
special, incidental, consequential and other damages.  
USER GUIDE  
13  
Customer Support  
Customer support for myPower for  
iPhone 4 is available at:  
Tekkeon, Inc.  
c/o myPower for iPhone 4  
3002 Dow Avenue, #134  
Tustin, CA 92780  
888-787-5888 / 714-832-1266  
Tekkeon, Inc. must issue a Return  
Merchandise Authorization (RMA)  
number for all exchanges or refunds.  
© 2010 Tekkeon, Inc. All Rights Reserved. Rev A  
Patent Pending. myPower and eSwap are trademarks  
of Tekkeon, Inc. Specifications are subject to change  
without notice.  
iPhone is a trademark ofApple Inc.,registered in the U.S.  
and other countries. “Made for iPhone” means that an  
electronic accessory has been designed to connect  
specifically to iPhone, and has been certified by the  
developer to meet Apple performance standards. Apple  
is not responsible for the operation of this device or its  
compliance with safety and regulatory standards.  
Cut loose. Stay loose.  

Multiquip Qp3ty User Manual
Ricoh Type 3260 User Manual
Samsung Aw18pk Series User Manual
Samsung Aw2402b User Manual
Sanyo W 3way Eco I Xmhx1852 User Manual
Sharp Mx 7001 User Manual
Sterling Power Products 2425ced User Manual
Toshiba Estudio E Studio 350 User Manual
Trane Air Conditioner Tam7a0b30h21sb User Manual
Wtb Vanilla 100r User Manual