READ AND SAVE THIS INSTRUCTION MANUAL
SUNPENTOW N
Air Cooler
Model SF-608R
Contents
Functions
1. Cooling, humidifying and air
Parts Name
purifying
Product Appearance
Control Panel
Important Safety Notes
Operation
2. Adopted photo-catalysis
technology,
Anti-bacterial water tank and
germ-free water curtain cycle
system
Specifications
Circuit Diagram
Maintenance
3. Three fan air speeds with Sleep
Mode function
Trouble Shooting
4. Automatic swing
Your Guarantee
_______________________________
5. Timer from half an hour to
Seven and a half hours
6. Castor wheels for portability
7. Remote control
Please read the instruction carefully prior to
use.
1
7. Close supervision is necessary when any appliance is used by or near children.
8. When unplugging, pull from the plug and not on the cord.
9. Turn off the unit when adding water.
10. Turn off and unplug unit before cleaning.
11. To avoid excessive dampness, do not use the Humidifying function for an extended period of
time in an area with poor circulation.
12. When not planning to use the unit for a long period of time, please unplug the power cord,
drain water, and store in a cool, dry place.
13. Please change water often to keep the water tank clean. It is recommended to change the
water once every 1 ~ 2 days.
Operation
Please fill the water tank as instructed below before turning on the unit. Operating instructions:
1. ON/OFF button
Press once to turn ON unit, the power indicator will be on. Press again to turn OFF unit.
2. FAN SPEED button
When turned ON, the unit starts on High (the H indicator light is on), to adjust:
o Press once for Medium speed (the M indicator light is on)
o Press again for Low speed (the L indicator light is on)
o Press again for High speed with Sleep mode (the H and Sleep indicator lights are on).
Air speed will be on High for 30 minutes, then auto switch to Low and remains at this
speed
o Press again for Medium speed with Sleep mode (the M and Sleep indicator lights are
on). Air speed will be on Medium for 30 minutes, then auto switch to Low and remains
at this speed
o Press again for Low speed with Sleep mode (the L and Sleep indicator lights are on).
Air speed will be on Low and remains at this speed.
o There are total of six different settings to choose from.
o To avoid catching a cold while sleeping, the Sleep mode will automatically decrease the
fan speed slowly. Timer can also be used in Sleep mode, which will automatically
operate for two minutes and shut off for one minute.
3. SWING button
Press the swing button to select the swinging function:
o Press once to turn on the swinging function (indicator is on), which can cover 60°
horizontally
o Press again for fixed direction (indicator is off)
4. TIMER button
Each press of the timer button will add 0.5 hour to the timer until it reached the maximum of
7.5 hours. Adding the numbers indicated equals the total time for the timer. For example:
when the 0.5 and 1 indicators are on at the same time, it means the timer has been set for 1.5
hours; when the 0.5, 1, 2 and 4 indicators are on at the same time, the timer has been set for
7.5 hours. If none of the timer indicators are on, the unit will run continuously.
5. COOLAIR (HUMIDIFYING) button
o Press once to turn on the water pump, press again to turn off the water pump
o If the water level is above “Empty”, the red indicator light will turn on and the pump will
start working. After 3 ~ 5 minutes, the unit will send out moist and comfortable cool air.
o If the water level is below “Empty” or if the water tank is empty, please do not turn on
this function. The unit will beep 5 times and the red indicator light will be flashing to
warn that the water tank is low/empty and the pump will NOT work.
3
o While operating in Cool Air / Humidifying mode, when the water tank reaches half point,
the unit will beep to warn you that the water tank is half empty. The red indicator light
remains on and the unit continuous running.
o To prevent damage to the water pump, when operating the unit without water, please keep
the Cool Air / Humidifying function OFF. The unit will operate as a normal electric fan.
6. WATER FILLING INSTRUCTIONS
o Please be sure the power is OFF before filling water.
o Fill the water tank by pouring water and adding ice into the Ice & Water Inlet.
o Amount of water added can be seen from the water indicator located at the bottom front.
o Make sure the water indicator indicates the water level is above “EMPTY”.
o Pour in 2/3 of water (6 Liters) and 1/3 of ice (3 Liters) for best cooling effect.
o You can also put some ice or ice packs in the “Ice Box” located on the top of the unit for
extra cooling (optional).
o DO NOT add more than 10 Liters of water into the water tank. The water indicator
should never rise above “Maximum” or the water tank will overflow.
NOTE: When operating the unit for the first time, please add water to the Maximum
level.
Specifications
Model
Rated
Voltage
Rated
Frequency
Rated
Power
Water
Consumption
Water Tank
Capacity
Speed
7m/s
Dimensions
N.W.
60Hz
SF-608R
~120V
60W
0.6-0.7L/h
10L
15.4”x11.8”x25.2”
16.51bs
Circuit diagram
N
L
N
L
Maintenance
Cleaning the filter net and water tank
It should be
put in the sun
Pull out
connecting sticks
To ensure best humidifying and purifying effect, please clean the filtration system once a week.
(Figure1)
(Figure2)
(Figure3)
(Figure4)
1. Cleaning the filter, pull filter upwards for opening slot.
2. Remove the photo-catalysis filter (small black filter).
4
3. Rinse with clean water.
4. Replace the photo-catalysis filter and insert filter back in place.
o Do not take off the rear panel
o Do not wet the photo-catalysis filter (fig.3), insolate it in the sun (fig.4).
Troubleshooting
Problem
Reasons
Solution
Turn on power
Switch off Timer mode
Power is not turned on
Timer fulfilled
Unit is broken/defective
Not blowing air
Contact Sunpentown
"On/Off" button not pressed
Unit is broken/defective
Press the “On/Off” button
Contact Sunpentown
Unit will not turn off
There are objects in it
Take off rear panel and filter net,
remove foreign object(s)
Contact Sunpentown
Unit makes noise
Not humidifying
No swing
Faulty motor
Air wheel/fan is loose
Contact Sunpentown
Water level low/empty
Faulty water pump
Add water to Maximum level
Contact Sunpentown
“Swing” button not pressed
Press the “Swing” button
Faulty leaf motor
Contact Sunpentown
Your Guarantee
If this product is found to be faulty as a result of faulty materials or workmanship within one
year from date of purchase, it will be repaired or replaced free of charge.
This guarantee is subject to the following terms:
1. Sunpentown must be notified of the fault.
2. Proof of purchase must be presented to Sunpentown’s nominated representative.
3. The warranty will be void if the product if modified, misused or repaired by an
unauthorized person.
4. The guarantee after repair or replacement will not be extended beyond the original
one-year period.
5. All replacement parts or units will be new or reconditioned.
6. Parts or units, which are replaced, become the property of Sunpentown.
7. The warranty applies for the use of the product in the USA.
8. Warranty does not include freight charges.
This GUARANTEE is in addition to your Statutory Rights.
SUNPENTOWN INTERNATIONAL INC.
18249 Valley Boulevard, City of Industry, CA 91744
Tel: 626-581-1818 Fax: 626-581-1398
5
|