Samsung Ust12sbgb User Manual

OWNER’S INSTRUCTIONS  
MANUAL DE INSTRUCCIONES  
MANUEL D’UTILISATION  
Indoor unit  
AST12SBGB  
AST18S0GB  
AST18S0GE  
AST24S6GB  
AST24S6GE  
Outdoor unit  
UST12SBGB  
UST18S0GB  
UST18S0GE  
UST24S6GB  
UST24S6GE  
Split-type Room Air Conditioner (Cool)  
Aire acondicionado doméstico sistema Split (Refrigeración)  
Climatiseur de type Séparé (Refroidissement)  
E S F A DB98-09949A(3)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . .  
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . .  
2
4
6
7
8
OPERATING YOUR AIR CONDITIONER  
Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . . . .  
9
Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Changing the Room Temperature Quickly . . . . . . . . . . . . . . . . . . 11  
Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Selecting Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . . . . . 15  
Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . . . . 15  
PROGRAMMING YOUR AIR CONDITIONER  
Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
RECOMMENDATIONS FOR USE  
Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . . 19  
Operating Your Air Conditioner Without the Remote Control . . . . . 20  
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Cleaning Deodorizing and Bio-Green filters (option) . . . . . . . . . . . 22  
TECHNICAL SPECIFICATIONS  
E-3  
View of the Unit  
The design and shape are subject to change according to the model.  
Indoor Unit  
On/Off switch  
Air filter  
(under the grille)  
Air Inlet  
Remote Control Sensor  
Air flow blades  
(outlet)  
TURBO indicator (RED)  
Energy Saving indicator  
(GREEN)  
Operation indicator  
(GREEN)  
Timer indicator  
(YELLOW)  
E-4  
Outdoor Unit  
UST12SBGB  
Air Inlet(Rear)  
Air Outlet  
Connection Valve  
Outdoor Unit  
UST18S0GB UST18S0GE UST24S6GB UST24S6GE  
Air Inlet(Rear)  
Air Outlet  
Connection Valve  
E-5  
Remote Control - Buttons and Display  
Remote control  
transmission indicator  
Mode selection button  
(AUTO, COOL, DRY, FAN)  
Operating mode  
(
AUTO,  
COOL,  
DRY,  
FAN)  
Temperature adjustment  
buttons  
Temperature setting  
Turbo mode  
Sleep mode  
Turbo/Sleep mode  
selection button  
Energy saving  
Fan speed  
Fan speed adjustment button  
Swing button  
Air flow direction  
On Timer setting  
On Timer button  
Off Timer button  
Off Timer setting  
Battery discharge indicator  
On/Off &  
Timer Set/Cancel button  
Energy Saving button  
E-6  
Getting Started  
You have just purchased a split type air conditioner and it has been  
installed by your installation specialist.  
Your Owner’s Instructions contains valuable information on using your  
air conditioner. Please take the time to read it as it will help you take full  
advantage of the unit’s features.  
The booklet is organized as follows.  
The following figures are shown on pages from 4 to 6 :  
-
-
Indoor and outdoor units  
Remote control(buttons and display)  
They will help you find the buttons and understand the symbols displayed.  
In the manual, you will find a series of step-by-step procedures for each  
function available.  
The illustrations in the step-by-step procedures use three different symbols:  
PRESS  
PUSH  
HOLD DOWN  
E-7  
Inserting the Remote Control Batteries  
You must insert or replace the remote control batteries when :  
You purchase the air conditioner  
The remote control does not work correctly  
Note  
Use two AAA, LR03 1.5V batteries.  
Do not use old batteries or different kinds of batteries together.  
Batteries may be completely discharged after 12 months, even  
if they have not actually been used.  
1
2
Push the battery cover on the rear of the remote control with your thumb  
in the direction of the arrow and remove it.  
Insert the two batteries, taking care to respect the polarities :  
+ on the battery with + on the remote control.  
- on the battery with - on the remote control.  
3
Close the cover by sliding it back until it clicks into place.  
E-8  
Selecting the Automatic Operating Mode  
You can start the air conditioner in Automatic mode from your remote  
control. In the Automatic mode, the standard temperature and the  
optimum fan speed is selected automatically. You can adjust the  
standard temperature but not the fan speed.  
1
If necessary, press the  
(On/Off) button.  
Result:  
The air conditioner starts up in Cool mode with  
Turbo fan speed.  
The operation indicator on the indoor unit lights up.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
If the  
is not displayed at the top of the remote control,  
press the  
appears.  
button on the remote control one or more times until it  
Result:  
The indoor unit beeps each time you press the  
button.  
The air conditioner runs in AUTO mode.  
Note  
You can change modes at any time.  
3
To adjust the standard temperature (The air conditioner automatically  
set the standard temperature by the current room temperature.),  
press the  
button one or more times.  
SET TEMP. SET TEMP.  
-2°C -1°C  
< When you feel hot >  
-
SET TEMP. SET TEMP.  
+1°C +2°C  
< When you feel chilly >  
Standard temperature  
E-9  
Cooling Your Room  
You must select the Cool mode if you wish to adjust the:  
Cooling temperature  
Fan speed when cooling  
1
If necessary, press the  
(On/Off) button.  
Result:  
The air conditioner starts up in Cool mode with  
Turbo fan speed.  
The operation indicator on the indoor unit lights up.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
3
If the  
press the  
appears.  
is not displayed at the top of the remote control,  
button on the remote control one or more times until it  
Result:  
The indoor unit beeps each time you press the  
The air conditioner runs in COOL mode.  
button.  
Note  
You can change modes at any time.  
To adjust the temperature, press the  
the required temperature is displayed.  
button one or more times until  
Possible temperatures are between 18°C and 30°C inclusive.  
Result: Each time you press the button:  
- The temperature is adjusted by 1°C  
- The indoor unit beeps  
The air conditioner starts cooling, provided that the room  
temperature is higher than the selected temperature.  
If the room temperature reaches the set temperature, the air  
conditioner stops cooling, but the fan is still operating.  
4
Select the fan speed by pressing the  
until the required setting is displayed:  
button one or more times  
)
Automatic (rotated :  
Low  
Medium  
High  
Turbo (maximum)  
Result:  
Each time you press the  
button, the indoor unit beeps.  
5
To control the direction of the air flow, refer to page 15.  
Note If you turn off the air conditioner in Cool mode, the set temperature  
is adjusted as below when you turn on the air conditioner again.  
Previous set temperature  
Set temperature  
Over 24°C  
24°C  
Below 24°C  
Previous set temperature  
E-10  
Changing the Room Temperature Quickly  
The Turbo cooling function is used to cool your room as quickly as possible.  
Example :  
You have just come home and find that the room is very  
hot. You wish to cool it down as quickly as possible.  
The Turbo function operates for 30 minutes with the maximum settings before  
returning automatically to the mode and temperature previously selected.  
1
If necessary, press the  
(On/Off) button.  
Result: The air conditioner starts up in Cool mode with  
Turbo fan speed.  
The operation indicator on the indoor unit lights up.  
The indoor unit beeps.  
2
3
4
Press the  
Result:  
button.  
The temperature and fan settings are adjusted automatically.  
The air conditioner cools the room as quickly as possible.  
After 30 minutes, the air conditioner is reset automatically to the  
previous mode, temperature and fan settings.  
But, if you press the  
it will change to AUTO mode automatically.  
button in DRY or FAN mode,  
If you wish to stop the Turbo function before the end of the 30-minute period,  
press the  
button one or more times until  
or  
disappears.  
Result:  
The air conditioner is reset automatically to the previous mode,  
temperature and fan settings.  
To control the direction of the air flow, refer to page 15  
.
E-11  
Removing Excess Humidity  
If the atmosphere in your room is very humid or damp, you can remove  
excess humidity without lowering the room temperature too much.  
1
If necessary, press the  
(On/Off) button.  
Result: The air conditioner starts up in Cool mode with  
Turbo fan speed.  
The operation indicator on the indoor unit lights up.  
The indoor unit beeps.  
The air conditioner is fitted with a protection mechanism  
to prevent the unit from being damaged when it is started  
immediately after being:  
IMPORTANT  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
If the  
is not displayed at the top of the remote control, press the  
button on the remote control one or more times until it appears.  
Result:  
The indoor unit beeps each time you press the  
The air conditioner runs in DRY mode.  
button.  
Note  
You can change modes at any time.  
3
To adjust the temperature, press the  
button one or more times  
until the required temperature is displayed.  
Possible temperatures are between 18°C and 30°C inclusive.  
Result: Each time you press the button:  
- The temperature is adjusted by 1°C  
- The indoor unit beeps  
The air conditioner starts removing the excess humidity;  
the quantity of air is adjusted automatically.  
4
To control the direction of the air flow, refer to page 15.  
E-12  
Airing Your Room  
If the atmosphere in your room is stale, you can air the room using  
the Fan feature.  
1
If necessary, press the  
(On/Off) button.  
Result: The air conditioner starts up in Cool mode with  
Turbo fan speed.  
The operation indicator on the indoor unit lights up.  
The indoor unit beeps.  
2
If the  
is not displayed at the top of the remote control,  
press the  
appears.  
button on the remote control one or more times until it  
Result:  
The indoor unit beeps each time you press the  
The air conditioner runs in FAN mode.  
The temperature is set automatically.  
button.  
Note  
You can change modes at any time.  
3
Select the fan speed by pressing the  
until the required setting is displayed:  
button one or more times  
Low  
Medium  
High  
Result: Each time you press the  
button, the indoor unit beeps.  
4
To control the direction of the air flow, refer to page 15.  
E-13  
Selecting Energy Saving Mode  
If you wish to save energy when using your air conditioner, select the  
Energy saving mode with the Energy saving button.  
1
If necessary, press the  
(On/Off) button.  
Result:  
The air conditioner starts up in Cool mode with  
Turbo fan speed.  
The operation indicator on the indoor unit lights up.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
Select COOL mode by pressing the  
button.  
Note  
You can select the Energy saving mode only in COOL mode.  
3
4
Press the  
Result:  
button.  
The indoor unit beeps.  
The air conditioner runs in the Energy saving mode.  
The outer air flow blade moves up and down.  
To stop the Energy saving mode, press the  
again.  
To adjust the temperature, press the  
button one or more times  
until the required temperature is displayed. Possible temperatures are  
between 26°C and 30°C inclusive.  
Note  
If you want to adjust temperature under 26°C, cancel the  
Energy saving mode before adjusting the temperature.  
5
6
To select the fan speed, press the  
the required setting is displayed.  
button one or more times until  
To control the direction of the air flow, refer to page 15.  
E-14  
Adjusting the Air Flow Direction Vertically  
Depending on the position of the indoor unit on the wall of your  
room, you can adjust the position of the outer air flow blade on the  
bottom of the unit, thus increasing the efficiency of the air  
conditioner.  
1
Press the  
button one or more times as required.  
Result: The outer blade is adjusted vertically.  
RECOMMENDATION  
When...  
Adjust the blade to face...  
Cooling  
Upwards.  
2
If you want the blade to move up and down automatically when the air  
conditioner is operating, press the  
button.  
Result: The blade move up and down, around the base position set.  
3
To stop the blade moving up and down, press the  
button again.  
Note  
If you switch the air conditioner... Then the blade is...  
Off  
Closed completely.  
Set to the initial position powered.  
On again  
Adjusting the Air Flow Direction Horizontally  
There are two sets of inner air flow blades. Just as the outer air flow  
blade can be adjusted vertically, the inner blades can be adjusted  
horizontally.  
1
Adjust each set of inner blades to the required position, by pushing or  
pulling them sideways.  
E-15  
Setting the On Timer  
The On Timer enables you to switch on the air conditioner automatically  
after a given period of time. You can set the period of time from  
30 minutes to 24 hours.  
1
To set the operating time, press the  
button one or more times until  
the required time is displayed. Possible time is between 0.5 hour and 24  
hour inclusive.  
2
Press the  
(Set/Cancel) button to complete the setting.  
Result: The remaining time is displayed.  
Blinking of the timer indicator stops.  
The selected mode and the temperature on the display  
disappear after 10 seconds.  
The air conditioner will switch on automatically when the  
counter displayed on the remote control reaches the set time  
and disappears the On timer setting.  
3
To select an operating mode in advance, press the  
button until the  
desired mode is displayed at the top of the remote control.  
Result: The air conditioner will run in the selected mode when it is  
turned on.  
To Cancel the On Timer  
1
To cancel the On Timer, press the  
timer setting disappears.  
button one or more times until the  
2
Press the  
(Set/Cancel) button.  
Note  
If you want to turn on the air conditioner before the timer reaches  
the setting time, press the (ON/OFF) button.  
E-16  
Setting the Off Timer  
The Off Timer enables you to switch off the air conditioner automatically  
after a given period of time. You can set the period of time from  
30 minutes to 24 hours.  
1
To set the operating time, press the  
button one or more times until  
the required time is displayed. Possible time is between 0.5 hour and 24  
hour inclusive.  
2
Press the  
(Set/Cancel) button to complete the setting.  
Result: The remaining time is displayed.  
Blinking of the timer indicator stops.  
The air conditioner will switch off automatically when the  
counter displayed on the remote control reaches the set time  
and disappears the Off timer setting.  
Example If you would like to turn the air conditioner on after 2 hours  
and to operate it for 2 hours:  
1. Press the  
button until ‘2.0 Hr’ is displayed.  
2. Press the (Set/Cancel) button.  
3. Press the  
button until ‘4.0 Hr’ is displayed.  
4. Press the (Set/Cancel) button.  
Note  
You can see or change the setting mode and/or the temperature  
by pressing the  
Off timer.  
button or the  
button after setting the  
To Cancel the Off Timer  
1
To cancel the Off Timer, press the  
timer setting disappears.  
button one or more times until the  
2
Press the  
(Set/Cancel) button.  
Note  
If you want to turn off the air conditioner before the timer reaches  
the setting time, press the (ON/OFF) button.  
E-17  
Setting the Sleep Timer  
The Sleep Timer can be used when you are cooling your room to  
switch the air conditioner off automatically after a period of six  
hours.  
Note  
If you wish to switch the unit off at a specific time, refer to  
page 17.  
1
2
Make sure that you have selected COOL mode.  
Press the  
button one or more times until  
appears on the  
remote control.  
Result: The indoor unit beeps.  
The air conditioner will be controlled as indicated in the  
illustrations below.  
Cooling The desired temperature is  
increased by 1°C every hour.  
When it has been increased  
by 2°C (after two hours), the  
temperature is maintained for  
four hours.  
To Cancel the Sleep Timer  
If you no longer wish to use the Sleep Timer that you have set, you  
can cancel it at any time.  
Press the  
Result:  
button.  
The indoor unit beeps.  
The  
is no longer displayed.  
The air conditioner operates normally.  
E-18  
Operating Recommendations  
Here are a few recommendations that you should follow when using  
your air conditioner.  
Topic  
Recommendation  
Power failure  
If a power failure occurs when the air  
conditioner is operating, the unit is switched off.  
When the power returns, the air conditioner  
starts up again automatically.  
Temperature and Humidity Ranges  
The following table indicates the temperature and humidity ranges within which the air conditioner can be used.  
If the air conditioner is used at...  
Then...  
High temperatures  
The automatic protection feature may be triggered and the air conditioner stopped.  
Low temperatures  
A water leak or some other malfunction may occur if the heat exchanger freezes.  
Water may condense on and drip from the surface of the indoor unit if it is used for long periods.  
High humidity levels  
Mode  
Outdoor Temperature  
Indoor Temperature  
Indoor Humidity  
Cooling  
Drying  
21°C to 43°C approx.  
18°C to 43°C approx.  
18°C to 32°C approx.  
18°C to 32°C approx.  
80% or less  
-
If the cooling operation is used at over 33°C(indoor temperature) then, it does not cool at its full capacity.  
E-19  
Operating Your Air Conditioner Without the Remote Control  
Your air conditioner can be operated directly from the indoor unit if  
the remote control is lost or broken.  
1
2
Slide the lower front grille down.  
To switch the air conditioner on, press the ON/OFF switch on the right  
side of the indoor unit.  
Result: The OPERATION indicator on the indoor unit comes on.  
The indoor unit beeps.  
The air conditioner starts up in the most suitable mode for  
the room temperature:  
Room Temperature  
Operating Mode Temperature Setting  
Cool 24°C approx.  
21°C or above  
3
To switch the air conditioner off, press the ON/OFF switch again.  
Note  
Even if the air conditioner has been switched on via the  
ON/OFF switch, operations can still be controlled using the  
remote control as usual.  
E-20  
Solving Common Problems  
Before contacting the after-sales service, perform the following simple checks.  
They may save you the time and expense of an unnecessary call.  
Problem  
Explanation/Solution  
The air conditioner does not  
operate at all  
Check that the breaker used for the air conditioner is switched on.  
Check that the operation indicator on the indoor unit is on;  
if necessary press the  
(On/Off) button on the remote control.  
Check whether the TIMER indicator on the indoor unit is switched on.  
If so:  
- Wait until the switch-on time is reached and the air conditioner starts  
up automatically  
- Cancel the timer (see pages 16 and 17 for further details)  
The air conditioner does not  
operate with the remote control  
Check that there are no obstacles between you and the indoor unit.  
Check the remote control batteries.  
Check that you are close enough to the indoor unit (seven meters/  
yards or less).  
No beep is heard when you press  
Check that you are pointing the remote control at the remote control  
sensor in the right of the indoor unit.  
the  
(On/Off) on the remote  
control  
Replace the remote control batteries if necessary.  
The air conditioner does not cool  
Check that the correct operating mode has been selected (AUTO,  
COOL).  
The room temperature may be too low.  
Dust may be blocking the air filter guard; refer to page 22 for cleaning  
instructions.  
Check that there is no obstacle in front of the outdoor unit.  
The fan speed does not change  
Check that the operating mode is set to COOL or FAN ; in the  
AUTO mode, the fan speed changes automatically and in the  
DRY mode, it is set to AUTO.  
when you press the  
button  
The air flow direction does not  
change when you press the  
button  
Check that the air conditioner has been switched on; if necessary,  
press the  
(On/Off) button on the remote control.  
The timer is not correctly triggered  
Check that the timer has been programmed correctly; see pages 16  
and 17.  
Odours are permeated in the room Air the room.  
during air conditioning  
E-21  
Cleaning Your Air Conditioner  
To get the best possible use out of your air conditioner, you must  
clean it regularly to remove the dust that accumulates on the air filter.  
Before cleaning your air conditioner, ensure that you  
have switched off the breaker used for the unit.  
IMPORTANT  
1
Slide the lower front grille down.  
2
3
Open the upper front grille by pulling right and left sides of the grille.  
Lift out the bottom edge of the air filters and pull down to release them.  
Upper front  
grille  
Hook  
Body  
groove  
4
5
Remove all dust on the air filters with a vacuum cleaner or brush.  
When you have finished, insert the top part of the filters into their slot  
and push down on the bottom edge until they click into place.  
6
Clean the front grille with a damp cloth and mild detergent (do NOT use  
benzene, solvents or other chemicals).  
Note If you have not used the air conditioner for a long period of time, set the fan  
Lower  
front  
grille  
going for three to four hours to dry the inside of the air conditioner thoroughly.  
Body groove  
Hook  
Cleaning Deodorizing and Bio-Green filters (Option)  
To remove minute dust particles and odors, deodorizing and Bio-Green  
filters are installed in the air conditioner. You should clean the filters  
every 3 months.  
Bio-Green Filter  
1
Open the upper front grille by pulling right and left sides of the grille.  
2
Pull out the deodorizing and Bio-Green filters.  
3
4
Wash the filters with clean water, then dry them in the shade.  
Insert the filters into the original position.  
Deodorizing filter  
Note  
You can change the position of filters with each other.  
5
Close the front grille.  
E-22  
Technical Specifications  
Model Indoor unit  
Power Supply  
AST18S0GE  
AST24S6GE  
220-240V~, 50Hz  
AST12SBGB  
AST18S0GB  
AST24S6GB  
220V~, 60Hz  
E-23  
THIS AIR CONDITIONER IS MANUFACTURED BY:  
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:  
CE CLIMATISEUR EST FABRIQUE PAR:  
ELECTRONICS  
Printed in Korea  

Lexmark D01 User Manual
Precisionaire Extended Media Surface Rigid Air Filters None User Manual
Samsung As09cm2x User Manual
Sanyo C1271 User Manual
Sanyo C2432a User Manual
Sanyo Stw0623c2 User Manual
Schumacher Automatic Sp2 User Manual
Siemens Desk Top Charger User Manual
Xerox Xt3008en0 2 User Manual
Yamaha Lf200 User Manual