OWNER’S
INSTRUCTIONS
AW2400B
Window-type Room Air Conditioner
(Cool)
E
S
DB98-08498A(1)
Contents
◆ PREPARING YOUR AIR CONDITIONER
◆
◆
◆
◆
◆
Safety Precautions .........................................................................................
Description of Each Component ....................................................................
Remote Control - Buttons ..............................................................................
Getting Started ...............................................................................................
Inserting the Remote Control Batteries ..........................................................
2
4
5
6
7
◆ OPERATING YOUR AIR CONDITIONER
◆
◆
◆
◆
◆
Cooling Your Room ........................................................................................
Ventilating Your Room .....................................................................................
8
9
Removing Excess Humidity ............................................................................ 10
Adjusting the Air Flow Direction Horizontally .................................................. 11
Adjusting the Air Flow Direction Vertically ...................................................... 11
◆ PROGRAMMING YOUR AIR CONDITIONER
◆
◆
◆
◆
Setting the On Timer ...................................................................................... 12
Setting the Off Timer ...................................................................................... 13
Setting the Sleep Timer .................................................................................. 14
Selecting Energy Saving mode ...................................................................... 15
◆ RECOMMENDATIONS FOR USE
◆
◆
◆
◆
Temperature and Humidity Ranges ................................................................ 16
Cleaning Your Air Conditioner ........................................................................ 17
Solving Common Problems ............................................................................ 18
Technical Specifications ................................................................................. 19
E-3
Description of Each Component
Air outlet
Inner air flow blades
(right/left orientation)
Air inlet (Inside)
Outer air flow blades
(up/down orientation)
Air filter (Inside)
Air inlet (Outside)
Air outlet
Ventilation lever
Power plug
(The type of power plug
may differ, depending on
the local power supply.)
Temperature/Timer settings
Energy Saver indicator
Energy Saver button
Timer setting button
Timer indicator
Temperature adjustment
buttons
Mode selection button
(Cool, Fan, Dry)
Fan speed
adjustment button
Air flow blade swing
button
Sleep timer setting button
On/Off button
Remote control sensor
E-4
Remote Control - Buttons
Timer setting button
Temperature adjustment
buttons
Sleep timer setting button
Mode selection
buttons
Fan speed
adjustment buttons
Energy Saver button
On/Off button
Air flow blade swing button
Swing
E-5
Getting Started
You have just purchased a Samsung window-type room air conditioner which should be installed
following your installation manual.
Your Owner’s Instructions contain much valuable information on using your air conditioner.
Please take the time to read them as they will help you take full advantage of the unit’s features.
The booklet is organized as follows.
◆ The following figures are shown on pages 4 and 5:
-
-
Description of Each Component
Remote control (buttons)
They will help you find the buttons and understand the symbols displayed.
◆ In the manual, you will find a series of step-by-step procedures for each function
available.
The illustrations in the step-by-step procedures use four different symbols:
◆
NOTE
◆
PRESS
PUSH
IMPORTANT
E-6
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when :
◆ You purchase the air conditioner
◆ The remote control does not work correctly
◆ Use two AAA, LR03 1.5V batteries.
◆
◆ Do not use old batteries or different kinds of batteries together.
◆ Batteries may be completely discharged after 12 months, even
if they have not actually been used.
1
2
Push the battery cover on the rear of the remote control with your thumb
in the direction of the arrow and remove it.
Insert the two batteries, taking care to respect the polarities :
◆ + on the battery with + on the remote control.
◆ - on the battery with - on the remote control.
3
Close the cover by sliding it back until it clicks into place.
E-7
Cooling Your Room
You must select the Cool mode if you wish to lower the temperature
in your room. You can also set the Fan speed.
Remote Control
Control Panel
Press the
(On/Off) button.
1
Result: ◆◆The air conditioner starts up in the mode selected when the
unit was last used.
◆◆The unit beeps twice.
The air conditioner is fitted with a protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:
◆
◆◆Plugged in
◆◆Stopped
It will start up normally after three minutes.
2
If the temperature is not displayed on the control panel:
◆◆Press the
or
button on the remote control
◆◆Press the
button on the unit one or more times until the
temperature is displayed.
Result: ◆◆The unit beeps each time you press the
◆◆The air conditioner starts up in the Cool mode.
/
button.
You can change modes at any time.
◆
3
To adjust the temperature, press the
or
buttons on the remote
control or unit one or more times until the desired temperature is displayed.
The temperature can be set between 64°F and 86°F.
Result: ◆◆Each time you press the
or
buttons:
– The temperature is adjusted by 1°F and displayed on
the control panel
– The unit beeps
◆◆The air conditioner starts cooling, if the room temperature is
higher than the selected temperature.
◆◆If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
4
To set the fan speed:
◆◆Press the
or
,
or
button on the remote control as desired.
◆◆Press the
button on the unit one or more times until the
desired Fan speed(F1, F2 or F3) is displayed.
Low
Medium
High
To control the direction of the air flow, refer to page 11.
5
E-8
Ventilating Your Room
If the air in your room is stale, you can ventilate the room using the Fan feature.
1
If you wish to discharge stale air, push the ventilation lever on the front of the
unit to the right and open position ( ).
Result: ◆◆The air inside the room circulates and stale air is discharged
outside.
Otherwise, push the ventilation lever to the left and closed position (
).
Result: ◆◆The air simply circulates inside the room.
Remote Control
Control Panel
2
If necessary, press the
(On/Off) button.
Result: ◆◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The unit beeps twice.
3
If the fan speed(F1, F2 or F3) is not displayed on the control panel:
◆◆Press the
or
button on the remote control
◆◆Press the
button on the unit one or more times until the fan speed
(F1, F2 or F3) is displayed.
Result: ◆◆The unit beeps each time you press the
◆ The air conditioner starts up in Fan mode.
/
button.
◆
◆ You can change modes at any time.
◆ When the air conditioner is in the Fan mode, the temperature
cannot be set or displayed.
4
To set the fan speed:
◆◆Press the
or
,
or
button on the remote control as desired.
◆◆Press the
button on the unit one or more times until the
desired fan speed(F1, F2 or F3) is displayed.
Low
Medium
High
5
To control the direction of the air flow, refer to page 11.
E-9
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
You can operate the Dry mode only by using the control panel.
Remote Control
Control Panel
1
If necessary, press the
(On/Off) button.
Result: ◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The unit beeps.
The air conditioner is fitted with a protection mechanism to
◆
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
2
If the
press the
appears.
“
”
indicator is not displayed at the top of the control panel,
button on the control panel one or more times until it
Result:
◆
◆
The unit beeps each time you press the
The air conditioner runs in Dry mode.
button.
You can change modes at any time.
The “ ” passes through the control panel.
◆
3
To adjust the temperature, press the
or
buttons one or
more times until the required temperature is displayed.
Possible temperatures are between 64°F and 86°F inclusive.
Result: ◆ Each time you press the
or
buttons:
- The temperature is adjusted by 1°F
- The unit beeps
◆ The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4
To control the direction of the air flow, refer to page 11.
E-10
Adjusting the Air Flow Direction Horizontally
Depending on the position of the unit in your room, you can adjust
the orientation of the inner air flow blades on the right-hand side of
the unit, thus increasing the efficiency of the air conditioner.
Remote Control
Control Panel
Press the Swing button on the remote control or unit.
1
Result: The inner blades swing automatically left and right.
◆
In the Energy Saving mode, the blades may stop when the
compressor is off. For details on the Energy Saving mode, refer to
page 15.
2
To stop the blades moving left and right, press the Swing button again.
◆
To stop the blades in a specific position and orient the air flow in
the corresponding direction, simply press the Swing button when
the blades are in the desired position.
Adjusting the Air Flow Direction Vertically
The outer air flow blades can be adjusted to control the vertical air
flow direction.
RECOMMENDATION
When...
Adjust the blades to face...
Cooling
Upwards.
Adjust the air flow blades to the desired position, by pushing them upwards or
downwards.
◆
If you orient the air flow blades downwards and the unit operates in the Cool
mode for long periods of time, dew may:
◆ Form on the surface of the blades
◆ Drip from the blades
E-11
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically after a
given time. You can select the On timer only when the air conditioner is off. You
can select the On timer only when the air conditioner operates in the Cool mode.
Remote Control
Control Panel
1
Check that the air conditioner has been switched off; if necessary,
press the (On/Off) button.
2
Set the operating time by pressing the
or button on the unit one or more times until the desired time is
displayed. The operating time can be set between 1 and 24 hours.
button on the remote control
Result: ◆ Each time you press the
button:
– The time is adjusted by 1 hour and displayed on the control
panel
– The unit beeps
◆ The operating time is displayed and decreases automatically to
indicate the remaining time.
◆ The air conditioner starts up in the Cool mode automatically
when the operating time reaches zero.
You can select the fan speed, temperature, air flow direction and
Energy saving mode after setting the On timer and Off timer mode.
However, when you change the mode, the On timer and Off timer
mode is canceled.
◆
To Cancel the On Timer
To cancel the timer, press:
◆
Timer on the remote control or unit one or more times until "--" is displayed.
or
◆
The
(On/Off) button on the remote control or unit (The air conditioner
operates in the mode selected when the unit was last used.)
E-12
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically after a
given time. You can select the Off timer only when the air conditioner is on. You
can select the Off timer only when the air conditioner operates in the Cool mode.
Remote Control
Control Panel
1
Check that the air conditioner has been switched on; if necessary,
press the (On/Off) button.
2
Set the operating time by pressing the
or button on the unit one or more times until the desired time is
displayed. The operating time can be set between 1 and 24 hours.
button on the remote control
Result: ◆ Each time you press the
button:
– The time is adjusted by 1 hour and displayed on the control
panel
– The unit beeps
◆ The operating time is displayed and decreases automatically to
indicate the remaining time.
◆ The air conditioner switches off automatically when the
operating time reaches zero.
You can select the fan speed, temperature, air flow direction and
Energy saving mode after setting the On timer and Off timer mode.
However, when you change the mode, the On timer and Off timer
mode is canceled.
◆
To Cancel the Off Timer
To cancel the timer, press:
◆
Timer on the remote control or unit one or more times until "--" is displayed.
or
◆
The
(On/Off) button on the remote control or unit.
E-13
Setting the Sleep Timer
The Sleep Timer can be used when you are cooling your room to switch
the air conditioner off automatically after 8 hours.
If you wish to switch the unit off at a specific time, refer to page 13.
◆
Remote Control
Control Panel
1
Make sure that you have selected the Cool mode.
2
Press the
or
Press the
button on the remote control
button on the unit.
Result:
◆
◆
Each time you press a button, the unit beeps.
The “SLEEP” passes through the control panel for about
15 seconds and the " " will be displayed.
◆
◆
The remaining time is displayed and decreased by 1 hour
automatically to indicate the remaining time.
The air conditioner will be controlled as illustration below.
Cooling When the temperature has
been increased by 2°F
(after 1 hour), it is maintained
for 7 hours.
To Cancel the Sleep Timer
To cancel the timer, press:
◆
Sleep on the remote control.
or
◆
Sleep on the unit.
Result:
◆ The unit beeps.
◆ The SLEEP indicator is no longer displayed.
◆ The air conditioner operates in the mode selected last.
If you select the Energy Saving mode in the Sleep Timer mode,
the Sleep Timer will be cancelled and the air conditioner will start up
in the Energy Saving mode.
◆
E-14
Selecting Energy Saving Mode
If you wish to save energy when using your air conditioner,
select the energy saving mode.
Remote Control
Control Panel
To select the energy saving mode, press the
control or button on the unit one or more times until the Energy
Saver indicator lights up.
button on the remote
1
Result:
◆
◆
The fan and compressor cycle on and off together.
The fan will continue to run for a short time after the
compressor cycles off.
◆
If you would like the air conditioner to run in Fan mode, do not press
the button. You cannot use the Fan mode in the energy
saving mode.
2
To stop the energy saving mode, press the
control or button on the unit again.
button on the remote
Result: The fan runs at all times, while the compressor cycles on and off.
◆
If you select the Sleep Timer in the Energy Saving mode, the Energy
Saving will be cancelled and the air conditioner will start up in the
Sleep Timer mode.
E-15
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges
within which the air conditioner can be used.
Mode
Indoor Temperature
Outdoor Temperature
Indoor Humidity
Cooling
70°F to 90°F approx.
70°F to 110°F approx.
80% or less
If the air conditioner is used at...
Then...
Higher temperature
The automatic protection feature may be triggered and the air
conditioner stopped.
Lower temperature
A water leakage or some other malfunction may happen if the
heat exchanger freezes.
Higher humidity levels
Water may condense on and drip from the surface of the unit
if it is used for long periods.
E-16
Cleaning Your Air Conditioner
Be sure to clean the air filter periodically to maintain the air conditioner
in the best condition for a long period of time.
When cleaning the air conditioner, turn it off and pull out the
power plug.
◆
1
Open the front grille by pulling on the tabs of the unit.
The removal of the front grille makes it easier to clean the air
conditioner. After opening the front grille, lift it up as much as possible,
then pull down to release it.
◆
2
3
Grasp the handle on the air filter and lift it slightly and then out to the front.
Remove all dust on the air filter with a vacuum cleaner or brush.
Front grille
4
5
When you have finished, insert the air filter back into its original position.
Front grille
Wipe the surface of the unit with a neutral detergent
and then wipe it again with dry cloth.
(Be sure not to use benzene, solvent or other chemical products.)
Grille groove
Body guide
If you...
Then...
◆
◆◆Set the fan going for a few hours to
dry the inside of the air conditioner
thoroughly.
Will not be using the
air conditioner for a
long period of time
◆◆Switch the air conditioner off and
unplug it from the wall socket.
◆◆Clean the filter and outer surfaces.
Set the fan going for a few hours to
dry the inside of the air conditioner
thoroughly.
Have not used the air
conditioner for a long
period of time
E-17
Solving Common Problems
Before contacting an authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Problem
Explanation / Solution
◆ Check that the circuit breaker used for the air conditioner has not been
triggered.
◆◆◆Check that the power cable is plugged into a wall socket and the socket is
switched on, if necessary.
The air conditioner does
not operate at all
◆◆◆Check that the temperature indicator on the unit is lit; if necessary,
press the
(On/Off) button on the remote control or unit.
◆ Check that there are no obstacles between you and the unit.
◆◆◆Replace the remote control batteries if necessary.
◆◆◆Check that you are close enough to the unit (seven metres/yards or less).
The air conditioner does not
operate with the remote
control
◆ Check that you are pointing the remote control at the remote control sensor
on the unit.
No beep is heard when you
press the
(On/Off) button
on the remote control
◆◆◆Replace the remote control batteries if necessary.
◆ Check that the correct operating mode has been selected(Cool).
◆◆◆The room temperature may be too low.
The air conditioner does not
cool
◆ Dust may be blocking the air filter; refer to page 17 for cleaning instructions.
◆ Check that there is no obstacle blocking the air flow into or out of the unit.
◆ Check that the timer has been programmed correctly; refer to page 12~14.
The timer is not correctly
triggered
Odors are permeating the
room during air conditioning
◆◆ Ventilate the room.
E-18
Technical Specifications
Design and specifications are subject to change without notice.
Model
Power Supply
AW2400B
230-208V~, 60Hz
E-19
SAMSUNG ROOM AIR CONDITIONER
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAM-
SUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against
manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor, Five (5) Years Parts Warranty for Compressor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United
States. Warranty repairs must be performed by SAMSUNG's authorized service center. To receive warranty service, the original
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center.
SAMSUNG will repair or replace any part found to be defective at no charge, as stipulated herein, with new or reconditioned
parts during the limited warranty period specified above. To request warranty service, the purchaser must contact SAMSUNG
for problem determination and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the
product. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement
parts and products assume the remaining original warranty, or ninety(90) days,whichever is longer.
In - Home Service: During the warranty labor period, in-home service will be provided subject to availability within the contigu-
ous United States. In-home service is not available in all areas. If during in-home service repair can not be completed, it may be
necessary to remove, repair and return the product. If in-home service is unavailable, SAMSUNG may elect, at our option, to
provide for transportation of our choice to and from a SAMSUNG authorized service center. Otherwise, transportation to and
from the SAMSUNG authorized service center is the responsibility of the purchaser.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of
this product and shall not apply to the following, including, but not limited to: delivery and installation; damage which occurs in
shipment; applications and uses for which this product was not intended; failures or problems which are caused by products or
equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of
nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper or faulty installation; product alter-
ation or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial numbers;
failure to follow operating and environmental instructions that are covered and prescribed in the instruction book; customer
adjustments, routine maintenance and cleaning; consumable items such as filters; use of non-SAMSUNG or unauthorized parts,
supplies, accessories or equipment which damage this product or result in service problems.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WAR-
RANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERI-
ODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE
LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY
OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE
THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST
SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND
CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND
LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND
THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG
NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO
ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG at:
SAMSUNG ELECTRONICS AMERICA, INC. - CONSUMER ELECTRONICS CUSTOMER SERVICE
400 Valley Road, Suite 201 Mount Arlington, NJ 07856
Tel: 973-601-6000, Fax: 973-601-6001
1-800-SAMSUNG (1-800-726-7864)
|