Samsung Aw09f2tbb User Manual

OWNER’S INSTRUCTIONS  
AW07F2NBA/BC/BD  
AW09F2TBA/BB  
AW12F2DBA/BB  
Window-type Room Air Conditioner ( Cool )  
E
DB98-04663B(3)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions .........................................................................................  
Air Conditioning Unit - Main Parts and Control Panel ....................................  
Getting Started ...............................................................................................  
2
4
5
OPERATING YOUR AIR CONDITIONER  
Cooling Your Room ........................................................................................  
Setting the Off timer .......................................................................................  
Cancelling the Off Timer .................................................................................  
Switching the Air Conditioner Off ....................................................................  
Adjusting the Air Flow Direction Horizontally ..................................................  
Adjusting the Air Flow Direction Vertically ......................................................  
Using the Ventilation Lever .............................................................................  
6
7
7
7
8
8
8
RECOMMENDATIONS FOR USE  
Operating Recommendation ...........................................................................  
Temperature and Humidity Ranges ................................................................  
9
9
Cleaning Your Air Conditioner ........................................................................ 10  
Solving Common Problems ............................................................................ 12  
Technical Specifications ................................................................................. 12  
INSTALLATION ....................................................................................................... 13  
CAUTION  
" The high inrush current of the starting compressor motor can have adverse effects to  
the operation of other equipment under unfavorable mains conditions. This equipment  
does not comply with the relevant technical standards for the limitation of voltage  
fluctuations and flicker."  
Before connecting this equipment to the power supply system, please report to your  
supply authority and obtain the consent.  
Do not connect other electric appliances to the same supply lines.  
AW18◆  
The maximum permissible system impedance at the power junction box is 0.24 ohms.  
Usually, the maximum permissible mains impedance will not be exceeded when the  
branch to the power outlet is fed from a junction box with a rated current of 32A.  
E-3  
Air Conditioning Unit - Main Parts and Control Panel  
The design and shape are subject to  
change according to the model.  
Inner air flow blades  
(right/left orientation)  
Air outlet  
Air inlet(Inside)  
Outer air flow blades  
(up/down orientation)  
Air inlet (Outside)  
Air filter(The air filter  
is located in inside.)  
Ventilation lever  
The power plug may be not supplied  
depending on the model.  
The type of the power plug  
may differ according to the  
type of local power supply.  
Power plug  
Power cable  
Power cable connection  
should be committed to  
an installation engineer.  
Blue Brown Yellow/Green  
Main Power Earth  
Timer control dial  
Temperature control dial  
Fan speed switch  
Air flow blade swing switch  
E-4  
Getting Started  
You have just purchased a window-type room air conditioner and it has been installed  
by your installation specialist.  
Your Owner’s Instructions contain much valuable information on using your air conditioner.  
Please take the time to read them as they will help you take full advantage of the units features.  
This Owner’s Instructions is just for using your air conditioner correctly.  
Thus, the illustrations shown in this manual may not exactly match your air conditioner.  
The booklet is organized as follows.  
The illustration on page 4 shows the air conditioning unit;  
it indicates the location and purpose of the main parts and controls on the unit.  
In the main part of the document, you will find a series of step-by-step  
procedures for each function available.  
The illustrations in the step-by-step procedures use four different symbols:  
PRESS  
PUSH  
IMPORTANT  
NOTE  
E-5  
Cooling Your Room  
You must select the Cool mode if you wish to lower the temperature  
in your room. You can also set the fan speed.  
Set the timer control dial to the “CON.” position.  
1
Result: The air conditioner starts up in Cool mode.  
When attempting to use it for a specified period of time,  
set it to the desired period of time.  
Refer to page 7.  
2
To adjust the temperature, turn the temperature control dial  
to the desired position.  
27˚C ~ 23˚C  
Possible temperatures: Between 18°C and 29°C inclusive.  
Result: The air conditioner starts cooling if the room temperature  
is higher than the selected temperature.  
29˚C  
~ 27˚C  
23˚C  
~ 18˚C  
If necessary, set the FAN SPEED switch to the desired speed.  
3
4
The fan turns rapidly.  
The fan turns slowly.  
To control the direction of the air flow, refer to page 8.  
E-6  
Setting the Off Timer  
Use the timer when attempting to operate the air conditioner  
for a specified period of time, and then turn it off automatically.  
Set the timer control dial to the desired time.  
1
Example: When you want to turn it off after operating  
it for four hours, set it to "4".  
Some minor errors may occur when setting the time  
depending upon the supply power and position of the timer.  
Set it to desired operating conditions.  
Refer to page 6.  
2
Cancelling the Off Timer  
You can cancel the operation of the timer whenever  
you want to cancel it.  
Set the timer control dial to the “CON.” or “OFF ” position.  
1
Switching the Air Conditioner Off  
You can switch the air conditioner off whenever you want.  
To switch the unit off, simply set the timer control dial to the “OFF ” position.  
Result:  
The air conditioner stops operating.  
E-7  
Adjusting the Air Flow Direction Horizontally  
Depending on the position of the unit in your room, you can adjust the  
orientation of the inner air flow blades on the right-hand side of the  
unit, thus increasing the efficiency of the air conditioner.  
1
Set the air flow blade swing switch to the  
position.  
Result: The inner blades swing automatically left and right.  
2
To stop the blades moving left and right, set the air flow blade swing switch  
to the  
position.  
To stop the blades in a specific position and orient the air flow in the  
corresponding direction, simply set the switch to the  
when the blades are in the desired position.  
position  
Adjusting the Air Flow Direction Vertically  
Again depending on the position of the unit in your room, you can  
adjust the orientation of the outer air flow blades on the right-hand  
side of the unit.  
RECOMMENDATION When...  
Adjust the blades to face...  
Cooling  
Upwards.  
Adjust the air flow blades to the desired position, by pushing them  
upwards or downwards.  
If you orient the air flow blades downwards and the unit operates  
in Cool mode for long periods of time, dew may:  
Form on the surface of the blades  
Drip from the blades  
Using the Ventilation Lever  
Use the ventilation lever when you want to exhaust unfresh air.  
If you wish to evacuate stale air outside, push the ventilation lever on the front  
of the unit to the right and the open position ( ).  
1
Result: The air inside the room circulates and stale air is evacuated outside.  
Otherwise, push the ventilation lever to the left and the closed position (  
Result: The air simply circulates inside the room.  
).  
E-8  
Operating Recommendation  
Here is a recommendation that you should follow when using your  
air conditioner.  
Topic  
Recommendation  
Power failure If a power failure occurs when the air conditioner is operating,  
the unit is switched off. When the power returns,  
the air conditioner starts up again automatically.  
Temperature and Humidity Ranges  
The following table indicates the temperature and humidity ranges  
within which the air conditioner can be used.  
Mode  
Indoor Temperature  
Outdoor Temperature  
Indoor Humidity  
Cooling  
21°C to 32°C approx.  
21°C to 43°C approx.  
80% or less  
If the air conditioner is used at...  
Then...  
Higher temperature  
The automatic protection feature may be triggered  
and the air conditioner stopped.  
Lower temperature  
A water leakage or some other malfunction may happen  
if the heat exchanger freezes.  
Higher humidity levels  
Water may condense on and drip from the surface of the unit  
if it is used for long periods.  
E-9  
(**** F2/H2 *** models)  
Cleaning Your Air Conditioner  
Be sure to clean the air filter periodically to maintain the air conditioner  
in the best condition for a long period of time.  
When cleaning the air conditioner, turn it off and pull out  
the power plug.  
IMPORTANT  
1
Hold the air filter handle, slightly pull it to the left side and open the front grille.  
The removal of the front grille makes it easier to clean the air  
conditioner. Open the grille as much as possible.  
CCAAUUTTIIOONN  
Removal and Reassembly of the Front Grille  
For user's safety, a safety clip has been installed in the front grille.  
1
Grasp the lower part of the  
front grille and the air filter  
handle, then open the grille.  
Safety clip  
2
3
Remove the safety clip and  
the front grille.  
When reassembling the front  
grille, you should install the  
safety clip again.  
2
3
Pull the air filter to the right side.  
Remove all dust on the air filter with a vacuum cleaner or brush.  
4
5
When you have finished, insert the air filter back into its original position.  
Wipe the surface of the unit with a neutral detergent and then wipe it again  
with dry cloth.  
(Be sure not to use benzene, solvent or other chemical products.)  
The air conditioner has two or three  
grille grooves depending on the model.  
If you...  
Then...  
Set the timer control dial to “CON.”,  
the temperature control dial to “2” or less,  
and let it run of a few hours to dry the  
inside of the air conditioner thoroughly.  
Switch the air conditioner off and  
unplug it from the wall socket.  
Will not be using the  
air conditioner for a  
long period of time  
Clean the filter and outer surfaces.  
Have not used the air Set the timer control dial to “CON.”,  
conditioner for a long  
period of time  
the temperature control dial to “2” or less, and  
let it run of a few hours to dry the inside of the  
air conditioner thoroughly.  
E-10  
(◆◆◆A2/G2◆◆ models)  
Cleaning Your Air Conditioner  
To get the best possible use out of your air conditioner,  
you must clean it regularly by two weeks to remove the dust on the air filter.  
Before cleaning your air conditioner, ensure that it is  
switched off and unplugged from the wall socket.  
Open the front grille by pulling on the tabs of the unit.  
1
2
The removal of the front grille makes it easier to clean the air  
conditioner. After opening the front grille, lift it up as much as  
possible, then pull down to release it.  
Grasp the handle on the air filter and lift it slightly and then out to the front.  
Front grille  
Remove all dust on the air filter with a vacuum cleaner or brush.  
When you have finished, slide the air filter back into position.  
3
4
Front grille  
Clean the outer surfaces with a damp cloth and mild detergent  
(do NOT use benzene, solvents or other chemicals).  
Wipe them dry with a clean, soft cloth.  
5
Grille groove  
Body guide  
If you...  
Then...  
Will not be using the  
air conditioner for a  
long period of time  
Set the fan going for a few hours  
to dry the inside of the air conditioner  
thoroughly.  
Switch the air conditioner off and  
unplug it from the wall socket.  
Clean the filter and outer surfaces.  
Have not used the air  
conditioner for a long  
period of time  
Set the fan going for a few hours to  
dry the inside of the air conditioner  
thoroughly.  
E-11  
Solving Common Problems  
Before contacting the after-sales service, perform the following simple checks.  
They may save you the time and expense of an unnecessary call.  
PROBLEM  
EXPLANATION / SOLUTION  
◆◆ Check that the circuit breaker used for the air conditioner has not been  
The air conditioner does not  
operate at all  
triggered.  
Check that the power cable is plugged into a wall socket and the  
socket is switched on, if necessary.  
Check that the correct operating mode has been selected.  
Set the temperature control dial to the desired position.  
The air conditioner does not  
cool  
The room temperature may be too low.  
Dust may be blocking the air filter; refer to page 10 or 11 for cleaning  
instructions.  
Check that there is no obstacle blocking the air flow into or out  
of the unit.  
Check that the air conditioner has been switched on; if necessary,  
The air flow direction does not  
change when you set the air  
flow blade swing switch to the  
position  
turn the timer control dial.  
Air the room.  
Odours are permeated in the  
room during air conditioning  
Technical Specifications  
Design and specifications are subject to change without notice.  
Model  
Power Supply  
220V(230V)~, 60Hz  
200-220V~, 50Hz  
220-240V~, 50Hz  
◆◆◆◆◆◆◆BA/BB/BC/BD  
◆◆◆◆◆◆◆DA  
◆◆◆◆◆◆◆EA/EB  
E-12  
Installation (for 60Hz)  
Electrical Requirements  
1
For personal safety:  
This appliance must be properly grounded.  
Do not, under any circumstances, cut or remove the third grounding  
prong from the power cord.  
We recommend that you do not use an extension cord or an  
adapter plug with this appliance.  
Do not change the plug on the power cord of this appliance.  
Follow national electrical codes or local codes and ordinances.  
115V  
15 AMP circuit  
"parallel" type  
230V/208V  
20 AMP circuit  
"perpendicular" type  
230V/208V  
15 AMP circuit  
"tandem" type  
230V/208V  
30 AMP circuit  
"tandem" type  
If the electric supply provided does not meet the above  
specifications, call a licensed electrician.  
Aluminum house wiring may pose special problems -  
consult a qualified electrician.  
This unit requires a separate circuit, serving only this appliance.  
E-13  
Installation  
Before installation, be sure to check the installation area or the air  
conditioner, and drain hose.  
Checkpoints prior to installation  
1 Check the cabinet and front grille of the unit for any harmful defects  
such as scratches.  
2 Be sure to check the power supply.  
- Refer to the specifications on the label attached to the unit.  
Installation Conditions  
1 As the unit is heavy, the wall or window of the installation area should  
have sufficient strength and durability for operation of the air conditioner,  
and for prevention of any vibration or noise.  
If it is weak, reinforcement work should be performed separately.  
2 It is advisable to install the air conditioner in the north or west side to  
prevent the effect of direct sunlight.  
When installing it in the south or east side due to unavoidable  
circumstances, it is advisable to install the sunshade to prevent the  
direct sunlight.  
In this case, take care not to cause any hindrance to the flow of outside air.  
3 When installing the air conditioner, be sure to obtain sufficient space on  
the rear side of the unit for smooth flow of air.  
When operating the air conditioner in closed areas such as inner building  
with cooling operation, and result in trouble with the unit.  
See the illustration below.  
The appliance must be fixed well by screw or similar method.  
Awning  
75mm  
min.  
300mm  
“A”  
500mm  
Fence, wall  
or other  
obstacle  
500mm  
500mm  
Approx.3  
˚
750mm  
150mm min.  
MODEL  
"A"  
AW07F2NB*  
AW09F2TB*  
AW12F2DB*  
180mm  
200mm  
220mm  
If the wall is greater than 150mm thick,  
cut the wall back on a 45˚ angle if possible.  
Outdoor Side  
45˚  
45˚  
Indoor Side  
100mm or more  
E-14  
In some region, drain tube and drain pan may not be supplied.  
Please contact the sales agent.  
Installation of the Drain Tube  
Rear  
Fix the drain tube as shown in the figure.  
Rubber cap  
Gasket  
Drain Tube  
Screws(2EA)  
Installation of the Drain Pan  
The procedure for installing the drain pan should be determined by the  
condition of the installing area.  
In the case of an area where the drain pan can not be directly  
installed on the rear side of the unit after installing the air conditioner.  
Example: High storage  
Open the front grille ; refer to page 10 or 11.  
1
2
Remove the screw located at the lower section of the front grille.  
It is secured in the  
section depending on the model.  
Remove the front panel.  
3
3-1 Press both sides of the cabinet in the direction of the arrow  
as shown in the figure.  
3-2 Pull the lower part of the front panel slightly forward.  
(below three inches)  
Front panel  
Screw  
3-3 Lift the front panel upward.  
Applying excessive force to remove the front panel may cause  
damage to the tab ; be sure not to use excessive force.  
Remove two screws on the lower, right and left sides of the unit.  
4
5
Remove the chassis from the cabinet.  
Drain Pan  
Remove the rubber cap inserted into the basepan.  
6
7
Rear  
Fix the drain pan as shown in the figure, and then connect the drain hose.  
(You can use any commercially-available drain hose.)  
Screw  
Install the cabinet at the specified area after installing the drain pan,  
and then re-assemble it in the original condition.  
8
Rubber cap  
Drain Hose  
Bottom-Side View with  
Drain Pan and Hose in Place  
Secure the front panel to the case by replacing the screw removed in  
step 2. If a screw not removed in step 2, secure the panel with a  
supplied screw.  
In the case of an area where the drain pan can be directly installed  
on the rear side of the unit after installing the air conditioner.  
Follow steps 6 and 7 only  
1
E-15  
THIS AIR CONDITIONER IS MANUFACTURED BY:  
Printed in China  

Maretron Engine Monitoring System Ems100 User Manual
Mitsubishi Electronics Mitsubishi Digital Electronics Air Conditioner Ms Awa User Manual
Motorola Ls3578 User Manual
Pioneer Automobile Parts Gbbt Series User Manual
Ricoh Aficio 3035 User Manual
Samsung Answering Machine Svm 400 User Manual
Sanyo 09kls51 User Manual
Savin 9027l User Manual
Whirlpool Ace082xh0 User Manual
Worth Data Philishave C446 User Manual