Samsung Aw0510d User Manual

OWNER’S  
INSTRUCTIONS  
AW0500/AW0500A  
AW0510/AW0510C/AW0510D  
AW0510A/AW0510B  
AW0600/AW0610A  
WINDOW-TYPE  
ROOM AIR CONDITIONER  
( Cool )  
E
S
DB68-00864A(8)  
Contents  
N PREPARING YOUR AIR CONDITIONER  
N
N
N
Safety Precautions .........................................................................................  
Description of Each Component ....................................................................  
Getting Started ...............................................................................................  
2
4
5
N OPERATING YOUR AIR CONDITIONER  
N
N
N
Cooling Your Room .........................................................................................  
Ventilating Your Room .....................................................................................  
Adjusting the Air Flow Direction Horizontally .................................................  
6
7
7
N RECOMMENDATIONS FOR USE  
N
N
N
N
N
Power Failure ..................................................................................................  
Temperature and Humidity Range ..................................................................  
Cleaning Your Air Conditioner .........................................................................  
8
8
9
Solving Common Problems ............................................................................ 10  
Technical Specifications ................................................................................. 11  
N INSTALLATION ...................................................................................................... 12  
E-3  
Description of Each Component  
Air inlet (Outside)  
Air outlet  
Air inlet (Inside)  
Air Filter (Inside)  
Ventilation Switch  
Air flow direction  
adjustable lever  
Power plug  
(Be sure to check the voltage  
before installation.)  
Thermostat control  
Selector  
E-4  
Getting Started  
You have just purchased a Samsung w indow -type room air conditioner w hich should be installed  
follow ing your Ow ners Instructions.  
Your Ow ner's Instructions contain much valuable information on using your air conditioner.  
Please take the time to read them as they w ill help you take full advantage of the unit's features.  
E-5  
Cooling Your Room  
You must select the COOL mode if you w ish to adjust the:  
NNCooling temperature  
NNFan speed w hen Cooling  
Turn the SELECTOR and set it to “ HI COOL ” , “ MED COOL ” or  
“ LOW COOL ”.  
1
Result: NNThe air conditioner starts up in cool mode.  
Note  
N You can change modes at any time.  
81˚F ~ 73˚F  
2
Turn the THERMOSTAT control to the desired position.  
Possible temperatures: Can be set between 64°F and 84°F.  
Result: The air conditioner starts cooling if the room temperature is  
higher than the selected temperature.  
81˚F  
73˚F  
~ 84˚F  
~ 64˚F  
To control the direction of the air flow, refer to page 7.  
3
E-6  
Ventilating Your Room  
If the air in your room is stale, you can ventilate the room using  
the Fan feature.  
If you wish to discharge stale air, push the ventilation switch on the front  
of the unit to the right and open position( ).  
1
Result: NNThe air inside the room circulates and stale air is discharged  
outside.  
Otherwise, push the ventilation switch to the left and closed position( ) .  
Result: NNThe air simply circulates inside the room.  
Turn the SELECTOR and set it to “HI FAN” or “LOW FAN” position.  
2
Result: NNThe air conditioner starts up in fan mode.  
Note  
NNHI FAN  
: The fan turns rapidly.  
NNLOW FAN : The fan turns slowly.  
NNYou can change modes at any time.  
To control the direction of the air flow, refer to the section below.  
3
Adjusting the Air Flow Direction Horizontally  
The air flow direction blades can be adjusted to im prove the efficiency  
of the air conditioner.  
The side by side air direction louvers are together and are controlled  
by a lever. They regulate air discharge to the right, left or straight.  
1
E-7  
Power Failure  
Here are a few recommendations that you should follow w hen using  
your air conditioner.  
If a power failure occurs, set the SELECTOR to OFF. When the power  
comes back on, wait five minutes before turning the unit back on.  
Temperature and Humidity Range  
The follow ing table indicates the temperature and humidity ranges  
w ithin w hich the air conditioner can be used.  
If the air conditioner is used at... Then...  
Higher temperature  
The automatic protection feature may be  
triggered and the air conditioner stopped.  
Lower temperature  
A water leakage or some other malfunction  
may happen if the heat exchanger freezes.  
Mode  
Indoor Temperature Outdoor Temperature  
Indoor Humidity  
Cooling 70˚F to 90˚F approx.  
70˚F to 110˚F approx.  
80% or less  
If the unit is used for  
long periods at a high  
humidity level, water may  
condense on and drip  
from the surface of the  
air conditioner.  
E-8  
Cleaning Your Air Conditioner  
Be sure to clean the air filter periodically to m aintain the air conditioner  
in the best condition for a long period of tim e.  
When cleaning the air conditioner, turn it off and pull out  
the pow er plug.  
IMPORTANT  
Hold the air filter handle, pull it slightly forward, and then pull it out to the  
right side.  
1
2
Remove the dust on the air filter using a vacuum cleaner and brush.  
3
Insert the air filter back into its original position.  
4
Wipe the surface of the unit with a neutral detergent  
and then wipe it again with dry cloth.  
(Be sure not to use benzene, solvent or other chemical products.)  
Note  
Storing the unit for a long period of time.  
N Check the cleanliness of the air conditioner.  
N Set the SELECTOR to "LOW FAN", and dry the  
inside of the air conditioner by operating it for 4 ~ 5 hours.  
(The service life of the air conditioner is lengthened when the  
dew formed on the heat exchanger is removed before storage.)  
N Turn off the air conditioner, and pull out the power plug.  
E-9  
Solving Common Problems  
Before contacting an authorized service center, perform the follow ing sim ple checks.  
They m ay save you the tim e and the expense of an unnecessary call.  
Problem  
Explanation / Solution  
N Check for a power failure.  
The air conditioner  
does not operate at all.  
NNNCheck the voltage.  
(See the technical specifications)  
NNNCheck the power plug for disconnection.  
NNNCheck to see whether the SELECTOR is placed in the "OFF" position.  
(Set it to the desired position.)  
NNNCheck to see whether the room temperature is too low.  
- Refer to page 8 for details about temperature condition.  
N Set the THERMOSTAT control to the desired position.  
The air comes out smoothly,  
but cooling is not effective.  
- When the number on the THERMOSTAT control is high, the room  
temperature may be too warm.  
NNNCheck to see whether there is any open window or leakage of cool  
air to the outside.  
- Close the window, and fill the gap.  
NNNCheck to see whether there is any obstacle adversely affecting  
the flow of the air inside and outside the room.  
- Remove the obstacle or change the position of the air conditioner.  
NNNCheck to see whether the air filter is clogged with dust or  
contaminated with foreign substances.  
- Clean the air filter.  
NNNCheck to see whether there is any direct sunlight facing the air conditioner.  
- Block the sunlight with a sunshade.  
NNNCheck to see whether there is any electric device generating heat.  
- Do not use the air conditioner together with any heating device.  
E-10  
Technical Specifications  
Model  
Cooling Capacity(BTU/h)  
Power Supply  
115V~, 60Hz  
AW0500  
5000  
5000  
5000  
5000  
5000  
5000  
6000  
5200  
6000  
AW0500A  
AW0510  
AW0510C  
AW0510A  
AW0510B  
AW0600  
AW0510D  
AW0610A  
Design and specifications are subject to change without notice.  
E-11  
Installation  
Before installation, please read the INSTALLATION instructions, then follow the  
procedures in order after considering the installation area and drain hose.  
CAUTION  
The manufacturer does not assume responsibility for accident or  
injury caused by an incorrectly installed air conditioner. If you are  
unsure about installation, contact an installation specialist.  
Checkpoints prior to installation  
Check the cabinet and front grille of the unit for any defects  
such as scratches.  
1
Be sure to check the power supply.  
2
- Refer to the specifications on the label attached to the unit.  
Installation instructions  
Electrical Requirements  
1
For personal safety:  
N This appliance must be properly grounded.  
N Do not, under any circumstances, cut or remove the third grounding  
prong from the power cord.  
N We recommend that you do not use an extension cord or an adapter  
plug with this appliance.  
N Do not change the plug on the power cord of this appliance.  
NNFollow national electrical codes or local codes and ordinances.  
115V  
15 AMP circuit  
"parallel" type  
230V/208V  
20 AMP circuit  
"perpendicular" type  
230V/208V  
15 AMP circuit  
"tandem" type  
230V/208V  
30 AMP circuit  
"tandem" type  
N If the electric supply provided does not meet the above specifications,  
call a licensed electrician.  
N Aluminum house wiring may pose special problems - consult a qualified  
electrician.  
N This unit requires a separate circuit, serving only this appliance.  
Window Requirements  
2
N Standard double-hung window with actual opening width of 22" to 36".  
The installation will need to be modified for windows other than  
the standard double-hung type.  
N Clear vertical opening of 12 7/8" minimum, from bottom of sash to sill.  
22" to 36"  
12 7/8" min  
N Install the air conditioner in a window where there will be enough  
clearance around the cabinet to allow ample circulation of air through  
the unit.  
Note  
All supporting parts should be secured to firm wood,  
masonry or metal.  
E-12  
Window installation  
Tools needed  
N Philips head screwdriver  
N Adjustable wrench  
N Scissors  
N Ruler or tape measure  
N Pencil  
Parts furnished  
Q’ty  
1
Q’ty  
1
Type  
A
Name of part  
Q’ty Type  
Name of part  
Type  
G
Name of part  
Long wood screw (5X16)  
Top support channel  
Adhesive seal strip  
Window gasket  
Window filler panel(Right)  
7
9
2
D
E
F
Screw (4X10)  
Window filler panel(Left)  
B
C
1
1
H
1
Window bracket  
Install the top support channel with three Type B screws provided.  
1
Top support  
channel  
Note  
The screw holes are larger gauge on the channel and smaller  
on the cabinet.  
The top support channel is “Lshaped. The high side of the  
channel must always face inwards.  
Assemble the window brackets on the cabinet.  
2
2-1 Loosen the lower screw slightly on each side of the cabinet and install  
the Type C window bracket.  
2-2 Tighten the screws securing the brackets.  
Window bracket(Type “C”)  
Attach the window filler panels to the unit.  
3-1 Slide the window filler panels and their frames into the channels on  
the top and bottom of the cabinet.  
3
3-2 Assemble the window filler panels to the cabinet using six Type B  
screws.  
E-13  
Installation (Cont.)  
Attach the seal strip to the window.  
4
4-1 Cut the adhesive-backed foam seal strip gasket to the window width.  
4-2 Remove the backing from the seal strip and attach the strip to  
the underside of the bottom window.  
Install the unit in the window.  
5
5-1 Place the air conditioner cabinet into the window with the top  
support channel positioned just in front of the bottom sash.  
5-2 Center the cabinet, side to side in the window then pull the window  
down until it rests on the air conditioner, just behind the mounting  
channel front flange on top of the cabinet.  
5-3 Make sure the cabinet maintains a slightly downward slant to  
the outside. A 1/4" slant, cabinet front to rear is desirable to help  
prevent water from entering the room.  
1/4"  
Extend the window filler panels.  
6
Type “A” screws  
6-1 Secure the window brackets to the stool using the Type A screw at  
each side.  
6-2 Secure the top mounting channel to the bottom sash with the Type  
A screw in the center.  
6-3 Extend the window filler panels into the window sash tracks  
on both sides. When the window is pulled down, the window should  
rest on the unit just behind the window filler panel frames.  
6-4 Slide the window filler panels outward until they touch the sides  
of the window. Secure the panels by putting four Type A screws  
through the mounting holes in the panels and driving them into the  
window stool and sash.  
Window bracket (Type “C”)  
Type “A” screw  
E-14  
Install the window gasket.  
7
Cut the foam window gasket to the window width and stuff it between the  
window and the glass to prevent air and insects from getting into the room.  
Check for air leaks and seal.  
8
9
Plug in the power, switch on the air conditioner, turn the SELECTOR to  
COOL mode and check for unusual vibrations.  
Note  
After several minutes the unit will be blowing out cold air.  
If the unit is not cold, please return it to the dealer.  
E-15  
Installation (Cont.)  
Removal of the Front Grille  
If you need to remove the front grille for replacement, follow the steps below.  
Hold the air filter handle, pull it slightly forward, and then pull it out to the  
right side.  
1
Note  
Remove the shipping tape before pulling out the air filter, if necessary.  
Remove the screw below the control panel that holds the grille in place.  
2
N Remove two knobs on the lower right hand section by pulling them forward.  
Disassemble the front grille.  
3
3-1 Press both sides of the cabinet in the direction of the arrow as shown  
in the figure.  
3-2 Pull the lower part of the front grille slightly forward.  
3-1  
3-1  
Note  
Do not pull bottom edge of grille toward you more than 3".  
Damage to the grille’s two top tabs may occur.  
3-3 Grasp the grille at both sides near the bottom and carefully lift it straight  
up to disengage the grille’s two top tabs from slots near the top of the  
cabinet.  
Reinstall the front grille.  
4
4-1 Fix the upper front grille.  
4-2 Slide one side of the lower part of the front grille slightly backward.  
4-3 Slide the other side backward.  
4-4 Reinstall the screw, the air filter and the knobs.  
E-16  
SAMSUNG ROOM AIR CONDITIONER  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAM-  
SUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against  
manufacturing defects in materials and workmanship for a limited warranty period of:  
One (1)Year Parts and Labor, Five (5)Years Parts Warranty for Compressor  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United  
States. Warranty repairs must be performed by SAMSUNG's authorized service center. To receive warranty service, the origi-  
nal dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service  
center.  
SAMSUNG will repair or replace any part found to be defective at no charge, as stipulated herein, with new or reconditioned  
parts during the limited warranty period specified above. To request warranty service, the purchaser must contact SAMSUNG  
for problem determination and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the  
product. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.  
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use  
of this product and shall not apply to the following, including, but not limited to: delivery and installation; damage which occurs  
in shipment; applications and uses for which this product was not intended; failures or problems which are caused by prod-  
ucts or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other  
acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper or faulty installation; prod-  
uct alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial  
numbers; failure to follow operating and environmental instructions that are covered and prescribed in the instruction book;  
customer adjustments, routine maintenance and cleaning; consumable items such as filters; use of non-SAMSUNG or unau-  
thorized parts, supplies, accessories or equipment which damage this product or result in service problems.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WAR-  
RANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY  
PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM  
OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT  
BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY  
OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO  
USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAM-  
SUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND  
AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAM-  
SUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL  
RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO  
OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD  
BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL  
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE  
AND STATES YOUR EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or con-  
sequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights,  
and you may also have other rights which vary from state to state.  
To obtain warranty service, please contact SAMSUNG at:  
SAMSUNG ELECTRONICS AMERICA, INC. - CONSUMER ELECTRONICS CUSTOMER SERVICE  
1 SAMSUNG PLACE, LEDGEWOOD, NJ 07852  
Tel: 973-691-6200, Fax: 973-691-6201  
1-800-SAMSUNG (1-800-726-7864)  

Oki C710n User Manual
Philips Scb7025 User Manual
Samsung Avmbh072ca0 User Manual
Samsung Sh12ua1 User Manual
Schumacher 94085894 User Manual
Schumacher Se 5212ma User Manual
Sharp Mx 2300g User Manual
Toshiba All In One Printer Ga 1201 User Manual
Tripp Lite Apsx2424 User Manual
York 131001 Yum A 1205 User Manual