Samsung Avmwc040ca0 User Manual

OWNER’S INSTRUCTIONS  
MANUAL DE INSTRUCCIONES  
MANUEL D’UTILISATION  
ISTRUZIONI PER LUSO  
MANUAL DE INSTRUÇÕES  
GEBRAUCHSANWEISUNG  
O¢H°IE™  
àçëíêìäñàü Ñãü èéãúáéÇÄíÖãü  
Heat pump  
Cooling only  
AVMWH020CA0(1,4)  
AVMWH032CA0(1,4)  
AVMWH040CA0(1,4)  
AVMWH052CA0(1,4)  
AVMWH072CA0(1,4)  
AVMWC020CA0(1,4)  
AVMWC032CA0(1,4)  
AVMWC040CA0(1,4)  
AVMWC052CA0(1,4)  
AVMWC072CA0(1,4)  
AVMWH020EA(B)0(1,4) AVMWC020EA(B)0(1,4)  
AVMWH026EA(B)0(1,4) AVMWC026EA(B)0(1,4)  
AVMWH035EA(B)0(1,4) AVMWC035EA(B)0(1,4)  
AVMWH052EA(B)0(1,4) AVMWC052EA(B)0(1,4)  
AVMWH070EA(B)0(1,4) AVMWC070EA(B)0(1,4)  
System Air Conditioner  
Aire acondicionado sistemático  
Climatiseur numérique multifonctionnel  
Sistema Aria Condizionata  
Sistema Ar Condicionado  
Klimaanlage System  
™‡ÛÙËÌ· ∫ÏÈÌ·ÙÈÛÌÔ‡  
ëËÒÚÂÏÌ˚È ÇÓÁ‰Û¯Ì˚È äÓ̉ˈËÓÌÂ  
E S F I P D G R DB98-05150A(3)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Wireless Remote Controller-Buttons and Display . . . . . . . . . . . 6  
Wired Remote Controller-Buttons and Display . . . . . . . . . . . . . 7  
Centralized Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Function Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
RECOMMENDATIONS FOR USE  
Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . 10  
Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Bio-Pure Filter Installation (optional) . . . . . . . . . . . . . . . . . . . . 13  
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
TECHNICAL SPECIFICATIONS  
Correct Disposal of This Product  
(Waste Electrical & Electronic Equipment)  
(Applicable in the European Union and other European countries with separate collection systems)  
This marking shown on the product or its literature, indicates that it should not be disposed with other household  
wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled  
waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable  
reuse of material resources.  
Household users should contact either the retailer where they purchased this product, or their local government  
office, for details of where and how they can take this item for environmentally safe recycling.  
Business users should contact their supplier and check the terms and conditions of the purchase contract.  
This product should not be mixed with other commercial wastes for disposal.  
E-3  
View of the Unit  
The figures are shown in this instruction may differ from yours depending on the model.  
Indoor Unit  
Remote control  
sensor  
Air inlet  
On/Off button  
Air flow blade(up/down)  
Air flow blade(right/left)  
On/Off indicator  
Removing frost indicator  
Filter sign indicator  
Timer indicator  
Fan indicator  
E-4  
Outdoor Unit  
TYPE A  
TYPE B  
Air outlet  
Air outlet  
Connection  
valve  
Connection valve  
Outdoor Unit  
TYPE C  
TYPE D  
Air outlet  
Air outlet  
Connection valve  
Air outlet  
Connection valve  
Outdoor Unit  
TYPE E  
TYPE F  
Air outlet  
Connection valve  
Connection valve  
If the heat exchanger in the outdoor unit gets dusty, cooling efficiency may fall. So clean the heat  
exchanger with water when it becomes dirty. However, be careful when you wash the surface of the  
heat exchanger because it is very sharp.  
No t e  
E-5  
Wireless Remote Controller-Buttons and Display  
The wireless remote controller is an optional accessory.  
To use the wireless remote controller, refer to an appropriate manual.  
Mode selection button  
Operating mode  
Temperature adjustment  
buttons  
Temperature setting  
Filter Reset button  
Fan speed  
Fan speed adjustment  
button  
Air flow direction  
Swing button  
On Timer setting  
On Timer button  
Off Timer setting  
Off Timer button  
Battery discharge indicator  
On/Off & Timer  
Set/Cancel button  
No t e  
After cleaning the air filter, press the filter reset button.  
The heating mode( ) is not selected in cooling only models.  
E-6  
Wired Remote Controller-Buttons and Display  
The wired remote controller is an optional accessory and it is installed on the wall.  
To use the wired remote controller, refer to an appropriate manual.  
Operating mode  
Removing frost indicator  
(Except Cooling Only Models)  
Centralized controller indicator  
(In case of installing the Centralized controller)  
Communication error indicator  
Temperature setting  
Fan speed  
On Timer setting  
Off Timer setting  
Air flow direction  
Test indicator  
Filter Sign indicator  
On/Off & Timer  
Set/Cancel button  
Temperature adjustment  
buttons  
On/Off indicator  
On Timer button  
Fan speed adjustment  
button  
Off Timer button  
Swing button  
Test button  
Filter Reset button  
Mode selection button  
No t e  
Test button is for your installation specialist. You must NOT press it.  
After cleaning the air filter, press the filter reset button. Then the wired remote  
controller will display the FILTER SIGN indicator when the time to clean the air  
filter; refer to page 11 or 12.  
The heating mode( ) is not selected in cooling only models.  
E-7  
Centralized Controller  
The centralized controller is an optional accessory and it is installed on the wall.  
To use the centralized controller, refer to an appropriate manual.  
Front View  
Operating lamp  
All On button  
All Off button  
On/Off indicators  
On/Off buttons  
Index  
No t e  
The operating lamp comes on even when only one air conditioner  
connected to the centralized controller is operating.  
Side View  
Operating Mode Switch  
COOL  
AUTO  
HEAT  
No t e  
Choose the appropriate operating mode with the Operating Mode Switch  
that enables the user to choose between the Cool/Auto/Heat mode.  
The heating mode( ) is not selected in cooling only models.  
E-8  
Function Controller  
The function controller is an optional accessory and it is installed on the wall.  
The function controller is an additional controller which is used with the centralized controller.  
To use the function controller, refer to an appropriate manual.  
Operating mode  
Removing frost indicator  
Centralized controller indicator  
(Except Cooling Only Models)  
Communication error indicator  
Temperature setting  
Room number display  
Fan speed  
Air flow direction  
Test indicator  
Filter Sign indicator  
On/Off & Timer  
Set/Cancel button  
Temperature adjustment  
buttons  
On/Off indicator  
Fan speed adjustment  
button  
Indoor unit selection button  
Swing button  
Test button  
Filter Reset button  
Mode selection button  
No t e  
Test button is for your installation specialist. You must NOT press it.  
After cleaning the air filter, press the filter reset button. Then the wired remote controller  
will display the FILTER SIGN indicator when the time to clean the air filter.  
The heating mode( ) is not selected in cooling only models.  
E-9  
Operating Recommendations  
Here are a few recommendations that you should follow w hen operating your air conditioner.  
Topic  
Recommendation  
Heating  
The heat pump function of the air conditioner absorbs heat from outside air and brings  
performances it indoors. As the temperature of the outside air drops, the heating performance of air  
conditioner will decrease. If you find that the room is not warm enough, using an  
additional heating appliance is recommended.  
Frost  
When outside temperature is low but humidity is high,  
frost may form on the outdoor unit at HEAT mode.  
If this happens:  
The heating operation stops.  
The defrost mode will be triggered automatically for about 10 minutes.  
No intervention is required ; after about 10 minutes, the air conditioner operates  
again normally.  
High indoor  
and outdoor  
If both indoor and outdoor temperatures are high and the air conditioner is running  
at HEAT mode, the outdoor unit’s fan and compressor may stop at times.  
temperatures This is normal ; simply wait until the air conditioner switches on again.  
Power failure  
If a power failure occurs while the air conditioner is operating, the unit will be  
switched off. When the power returns, the air conditioner starts up again  
automatically.  
Temperature and Humidity Ranges  
The follow ing table indicates the temperature and humidity ranges, w ithin w hich the  
air conditioner can be used.  
If the air conditioner is used at...  
Then...  
High temperature  
The automatic protection feature may be triggered and the air  
conditioner stopped.  
Low temperature  
A water leakage or some other malfunction may happen if  
the heat exchanger freezes.  
High humidity levels  
Water may condense on and drip from the surface of the  
indoor unit if it is used for a long periods.  
Mode  
Heating  
Cooling  
Drying  
Outdoor Temperature  
-15°C to 24°C approx.  
- 5°C to 43°C approx.  
- 5°C to 43°C approx.  
Indoor Temperature  
27°C or less  
Indoor Humidity  
-
21°C to 32°C approx.  
21°C to 32°C approx.  
80% or less  
-
◆◆ The standardized temperature for heating is 7°C. If the outdoor  
temperature drops to 0°C or below, the heating capacity can be reduced  
depending on the temperature condition.  
If the cooling operation is used at over 32°C(indoor temperature),  
it does not cool at its full capacity.  
E-10  
Cleaning Your Air Conditioner  
◆◆020/026/032/035/040◆  
To get the best possible use out of your air conditioner, you m ust  
clean it regularly to rem ove the dust that accum ulates on the air filter.  
Before cleaning your air conditioner, ensure that you  
IMPORTANT  
have sw itched off the breaker used for the unit.  
1
Open the front grille by lifting the tabs on the lower right and left sides of  
the indoor unit.  
2
3
Disassemble the front grille by pulling it forwards.  
Hold the edge of the air filter under the front grille and pull to release them.  
Remove all dust on the air filters with a vacuum cleaner or brush.  
4
5
Clean the front panel with a damp cloth and mild detergent  
(do NOT use benzene, solvents or other chemicals).  
6
Reassemble the air filters and the front grille.  
No t e  
No t e  
◆◆ If you have not used the air conditioner for a long period  
of tim e, set the fan going for three to four hours to dry  
the inside of the air conditioner thoroughly.  
After cleaning the air conditioner, press the Filter Reset  
button.  
Wired Remote Controller  
Wireless Remote Controller  
E-11  
Cleaning Your Air Conditioner (continued)  
◆◆052/070/072◆  
To get the best possible use out of your air conditioner, you m ust  
clean it regularly to rem ove the dust that accum ulates on the air filter.  
Before cleaning your air conditioner, ensure that you  
IMPORTANT  
have sw itched off the breaker used for the unit.  
1
Open the front grille by pulling on the tabs on the lower right and left  
sides of the indoor unit.  
2
3
Lift out the bottom edge of the air filters and pull down to release them.  
Remove all dust on the air filters with a vacuum cleaner or brush.  
4
5
When you have finished, insert the top part of the filters into their slot  
and push down on the bottom edge until they click into place.  
Clean the front panel with a damp cloth and mild detergent  
(do NOT use benzene, solvents or other chemicals).  
Hook  
No t e  
No t e  
◆◆ If you have not used the air conditioner for a long period  
of tim e, set the fan going for three to four hours to dry  
the inside of the air conditioner thoroughly.  
Front grille  
Body groove  
After cleaning the air conditioner, press the Filter Reset  
button.  
Wired Remote Controller  
Wireless Remote Controller  
E-12  
Bio-Pure Filter Installation (optional)  
The air conditioner can be fitted with a Bio-Pure or deodorizing filter to remove  
minute dust particles or odours. The service life of the filter is approximately  
three months depending on the time during which the air conditioner is used.  
Remove the vinyl packing from the filter.  
1
No t e  
Do not remove the packing from a bio-pure filter until you wish  
to use the filter, as it will lose its properties.  
Insert the filter in the filter holder and press the three tabs until you hear  
a click.  
2
3
4
Bio-pure filter  
Open the front grille by pulling on the tabs on the lower right and left side  
of the indoor unit.  
Deodorizing filter  
Take out the existing filter and replace it with the new one.  
E-13  
Solving Common Problems  
Before contacting the after-sales service, perform the follow ing simple checks.  
They may save your time and expense of an unnecessary call.  
Problem  
Explanation/Solution  
The air conditioner does not Check that the breaker used for the air conditioner is switched on.  
operate at all  
Wired Remote Controller  
The air conditioner does not  
operate with the remote controller  
is displayed on the wired remote controller. In this case,  
turn the air conditioner off and contact your dealer.  
Wired Remote Controller  
When turning on/off the  
air conditioner, it is not  
In case of using the wired remote controller for a group, the air  
conditioners connected to the remote controller are turned on/off in  
order. Thus, it takes some time(up to 32 seconds).  
turned on/off immediately.  
Wireless Remote Controller  
The air conditioner does not Check that there are no obstacles between you and the remote  
operate with the remote  
controller  
control sensor.  
Check the wireless remote controller batteries  
Check that you are close enough to the remote control sensor.  
(7 metres/yards or less).  
Wireless Remote Controller  
No beep is heard when you Check that you are pointing the remote controller at the remote  
press  
(ON/OFF) on the  
control sensor on the indoor unit.  
remote controller  
Replace the remote controller batteries if necessary.  
If there is a strong light around the air conditioner, a  
three-wavelength light, a neon sign, etc., for example,  
the air conditioner may not be operated with a remote controller.  
If this happens, use the remote controller close by the remote  
control sensor.  
The air conditioner does  
not cool or heat  
Check that the correct operating mode has been selected.  
The room temperature may be too low or too high.  
Dust may be blocking the air filter guard; refer to page 11 or 12  
for cleaning instructions.  
Check that there is no obstacle in front of the outdoor unit.  
When heating, the required Check that the required temperature has been set correctly.  
room temperature is never  
reached and the air  
Increase the fan speed.  
conditioner frequently stops  
E-14  
Technical Specifications  
Model  
Power Supply  
AVMWH020CA0(1,4)  
AVMWH032CA0(1,4)  
AVMWH040CA0(1,4)  
AVMWH052CA0(1,4)  
AVMWH072CA0(1,4)  
1Ø, 208-230V~, 60Hz  
AVMWC020CA0(1,4)  
AVMWC032CA0(1,4)  
AVMWC040CA0(1,4)  
AVMWC052CA0(1,4)  
AVMWC072CA0(1,4)  
AVMWH020EA(B)0(1,4)  
AVMWH026EA(B)0(1,4)  
AVMWH035EA(B)0(1,4)  
AVMWH052EA(B)0(1,4)  
AVMWH070EA(B)0(1,4)  
1Ø, 220-240V~, 50Hz  
AVMWC020EA(B)0(1,4)  
AVMWC026EA(B)0(1,4)  
AVMWC035EA(B)0(1,4)  
AVMWC052EA(B)0(1,4)  
AVMWC070EA(B)0(1,4)  
E-15  
THIS AIR CONDITIONER IS MANUFACTURED BY:  
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:  
CE CLIMATISEUR EST FABRIQUE PAR:  
QUESTO CONDIZIONATORE D’ARIA È PRODOTTO DA:  
ESTE APARELHO DE AR CONDICIONADO É FABRICADO POR:  
DIESE KLIMAANLAGE IST FABRIZIERT VON:  
AYTH H ™Y™KEYH KATA™KEYA™THKE A¶O :  
ùíéí äéçÑàñàéçÖê àáÉéíéÇãÖç îàêåéâ:  
ELECTRONICS  

Mitsubishi Electronics 8 User Manual
Mitsubishi Motors Automobile Parts F5m41 User Manual
Ricoh Aficio Mp C3300 User Manual
Samsung Avmwh052ca0 User Manual
Sanyo Cr14250se User Manual
Sharper Image Si871 User Manual
Sharp Mx 7001 User Manual
Telex Bc 800nm User Manual
Whirlpool Acw082 User Manual
York Dh 210 User Manual