Samsung As24a1 A2 Rc User Manual

OWNER’S INSTRUCTIONS &  
INSTALLATION MANUAL  
MANUAL DE INSTRUCCIONES &  
MANUAL DE INSTALACIÓN  
MANUEL D’UTILISATION &  
MANUEL D’INSTALLATION  
Indoor Unit  
Outdoor Unit  
US07A5(A6)MA  
US09A5(A6)MA  
US12A5(A6)MC  
US12AA(AB)MC  
US18A5(A6)RC  
US18A9(A0)RCD  
US24A1(A2)RC  
AS07A5(A6)MA  
AS09A5(A6)MA  
AS12A5(A6)MC  
AS12AA(AB)MC  
AS18A5(A6)RC  
AS18A9(A0)RCD  
AS24A1(A2)RC  
Split-type Room Air Conditioner (Cool)  
Aire acondicionado doméstico sistema Split (Refrigeración)  
Climatiseur de type Séparé (Refroidissement)  
E
S
F
DB68-01822A(10)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . 6  
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . 8  
Installing the Remote Controller Holder . . . . . . . . . . . . . . . . . . 8  
OPERATING YOUR AIR CONDITIONER  
5 Way Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
9
Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . 10  
Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Changing the Room Temperature Quickly . . . . . . . . . . . . . . . 12  
Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . 15  
Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . 15  
PROGRAMMING YOUR AIR CONDITIONER  
Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
RECOMMENDATIONS FOR USE  
Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . 20  
Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Installing a Filter (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
TECHNICAL SPECIFICATIONS  
E-3  
View of the Unit  
The design and shape are subject to change according to the model.  
Indoor Unit  
Air Inlet  
Air flow blades (outlet)  
Air filter  
(under the grille)  
Timer indicator  
Remote Control Sensor  
SAVING indicator  
STANDARD indicator  
NATURE indicator  
SILENCE indicator  
POWER indicator  
On/Off & 5 Way  
selection button  
Note  
For details on the 5 Way, refer to page 9.  
E-4  
Outdoor Unit  
Air Inlet(Rear)  
US07A5(A6)MA  
US09A5(A6)MA  
Air Outlet  
Connection Valve  
Outdoor Unit  
Air Inlet(Rear)  
US12A5(A6)MC  
Air Outlet  
Connection Valve  
(Inside)  
Outdoor Unit  
Air Inlet(Rear)  
US12AA(AB)MC  
Air Outlet  
Connection Valve  
Air Inlet(Rear)  
Outdoor Unit  
US18A5(A6)RC  
US18A9(A0)RCD  
US24A1(A2)RC  
Air Outlet  
Connection Valve  
E-5  
Remote Control - Buttons and Display  
Remote control  
transmission indicator  
Mode selection button  
(AUTO, COOL, DRY, FAN)  
Operating mode  
(
AUTO,  
COOL,  
DRY,  
FAN)  
Temperature adjustment  
buttons  
Temperature setting  
Turbo mode  
Sleep mode  
Turbo/Sleep mode  
selection button  
Fan speed  
Fan speed adjustment  
button  
Air flow direction  
Swing button  
On Timer setting  
On Timer button  
Off Timer setting  
Off Timer button  
Battery discharge indicator  
On/Off &  
Timer Set/Cancel button  
5 Way selection button  
E-6  
Getting Started  
You have just purchased a split type air conditioner and it has been  
installed by your installation specialist.  
Your Owner’s Instructions contains valuable information on using your  
air conditioner. Please take the time to read it as it will help you take full  
advantage of the unit’s features.  
The booklet is organized as follows.  
The following figures are shown on pages from 4 to 6 :  
-
-
Indoor and outdoor units  
Remote control(buttons and display)  
They will help you find the buttons and understand the symbols displayed.  
In the main part of the installation book, you will find a series of  
step-by-step procedures for each function available.  
The illustrations in the step-by-step procedures use three different symbols:  
PRESS  
PUSH  
HOLD DOWN  
E-7  
Inserting the Remote Control Batteries  
You must insert or replace the remote control batteries when :  
You purchase the air conditioner  
The remote control does not work correctly  
Note  
Use two AAA, LR03 1.5V batteries.  
Do not use old batteries or different kinds of batteries together.  
Batteries may be completely discharged after 12 months, even  
if they have not actually been used.  
1
2
Push the battery cover on the rear of the remote control with your thumb  
in the direction of the arrow and remove it.  
Insert the two batteries, taking care to respect the polarities :  
+ on the battery with + on the remote control.  
- on the battery with - on the remote control.  
3
Close the cover by sliding it back until it clicks into place.  
Installing the Remote Controller Holder  
1
2
Place the remote controller holder on the wall.  
Fix the remote controller holder by tightening the screws.  
3
Put the remote controller into the holder as shown in the figure.  
If you want to install the holder easily, you had better install the holder  
on the wooden frame.  
E-8  
5 Way Function  
You can select the 5 Way function with operating mode of the air conditioner for  
more comfortable circumstances. You can use the 5 Way function with the indoor  
unit as well as the remote control. Thus, you can use this function  
even though you have lost your remote control.  
Using with the indoor unit  
1
Press the  
mode.  
(ON/OFF) button one time and then select the desired  
To obtain a(n)...  
Then select...  
Normal operating  
(STANDARD) mode  
Reducing the uncomfortable  
temperature gradually  
(NATURE) mode  
(POWER) mode  
(SAVING) mode  
(SILENCE) mode  
High fan speed  
Compressor run time reduced  
Fan speed reduces as the temperature  
decreases  
2
To stop the operating, press the  
turn off.  
(ON/OFF) button until all indicators  
Note  
Even if the air conditioner has been turned on via the ON/OFF  
button on the unit, operations can still be controlled using the  
remote control as usual.  
Selecting with the Remote Control  
To select the 5 Way function with the remote control, press the 5 Way  
button one or more times until the desired mode is selected.  
Each time you press the 5 Way button:  
Each 5 Way indicator on the indoor unit lights up in order.  
E-9  
Selecting the Automatic Operating Mode  
You can start the air conditioner in Automatic mode from your remote  
control. In the Automatic mode, the standard temperature and the  
optimum fan speed is selected automatically. You can adjust the  
standard temperature but not the fan speed.  
1
If necessary, press the  
(On/Off) button.  
Result:  
The 5 Way indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected  
when the unit was last used.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
If the  
is not displayed at the top of the remote control,  
press the MODE button on the remote control one or more times until it  
appears.  
Result:  
The indoor unit beeps each time you press the MODE button.  
The air conditioner runs in AUTO mode.  
Note  
You can change modes at any time.  
3
To adjust the standard temperature (The air conditioner automatically  
set the standard temperature by the current room temperature.),  
press the TEMPERATURE buttons one or more times.  
SET TEMP. SET TEMP.  
-4°F/-2°C -2°F/-1°C Standard temperature +2°F/+1°C +4°F/+2°C  
< When you feel hot > < When you feel chilly >  
-
SET TEMP. SET TEMP.  
E-10  
Cooling Your Room  
You must select the Cool mode if you wish to adjust the:  
Cooling temperature  
Fan speed when cooling  
1
If necessary, press the  
(On/Off) button.  
Result: The 5 Way indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected  
when the unit was last used.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
If the  
is not displayed at the top of the remote control,  
press the MODE button on the remote control one or more times until it  
appears.  
Result:  
The indoor unit beeps each time you press the MODE button.  
The air conditioner runs in COOL mode.  
Note  
You can change modes at any time.  
3
To adjust the temperature, press the TEMPERATURE buttons one or  
more times until the required temperature is displayed.  
Possible temperatures are between 65°F(18°C) and 86°F(30°C)  
inclusive.  
Result:  
Each time you press the TEMPERATURE buttons:  
- The temperature is adjusted by 1°F(1°C)  
- The indoor unit beeps  
The air conditioner starts cooling, provided that the room  
temperature is higher than the selected temperature;  
the fan will, however, operate.  
4
Select the fan speed by pressing the FAN button one or more times  
until the required setting is displayed:  
Automatic (rotated :  
)
Low  
Medium  
High  
Result:  
Each time you press the FAN button, the indoor unit beeps.  
5
To control the direction of the air flow, refer to page 15.  
E-11  
Changing the Room Temperature Quickly  
The Turbo cooling function is used to cool your room as quickly as possible.  
Example :  
You have just come home and find that the room is very  
hot. You wish to cool it down as quickly as possible.  
The Turbo function operates for 30 minutes with the maximum settings before  
returning automatically to the mode and temperature previously selected.  
1
If necessary, press the  
(On/Off) button.  
Result:  
The 5 Way indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected when the unit  
was last used.  
The indoor unit beeps.  
2
Press the  
Result:  
button.  
The temperature and fan settings are adjusted automatically.  
The air conditioner cools the room as quickly as possible.  
After 30 minutes, the air conditioner is reset automatically to the  
previous mode, temperature and fan settings.  
But, if you press the  
button in DRY or FAN mode,  
it will change to AUTO mode automatically.  
3
If you wish to stop the Turbo function before the end of the 30-minute period,  
press the  
button one or more times until  
or  
disappears.  
Result:  
The air conditioner is reset automatically to the previous mode,  
temperature and fan settings.  
4
To control the direction of the air flow, refer to page 15.  
E-12  
Removing Excess Humidity  
If the atmosphere in your room is very humid or damp, you can  
remove excess humidity without lowering the room temperature too  
much.  
1
If necessary, press the  
(On/Off) button.  
Result: The 5 Way indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism  
to prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
If the  
is not displayed at the top of the remote control, press the  
MODE button on the remote control one or more times until it appears.  
Result:  
The indoor unit beeps each time you press the MODE button.  
The air conditioner runs in DRY mode.  
Note You can change modes at any time.  
3
To adjust the temperature, press the TEMPERATURE buttons one or  
more times until the required temperature is displayed.  
Possible temperatures are between 65°F(18°C) and 86°F(30°C)  
inclusive.  
Result: Each time you press the TEMPERATURE buttons:  
- The temperature is adjusted by 1°F(1°C)  
- The indoor unit beeps  
The air conditioner starts removing the excess humidity;  
the quantity of air is adjusted automatically.  
4
To control the direction of the air flow, refer to page 15.  
E-13  
Airing Your Room  
If the atmosphere in your room is stale, you can air the room using  
the Fan feature.  
1
If necessary, press the  
(On/Off) button.  
Result: The 5 Way indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
2
If the  
is not displayed at the top of the remote control,  
press the MODE button on the remote control one or more times until it  
appears.  
Result:  
The indoor unit beeps each time you press the MODE button.  
The air conditioner runs in FAN mode.  
The temperature is set automatically.  
Note  
You can change modes at any time.  
3
Select the fan speed by pressing the FAN button one or more times  
until the required setting is displayed:  
Low  
Medium  
High  
Result: Each time you press the FAN button, the indoor unit beeps.  
To control the direction of the air flow, refer to page 15.  
4
E-14  
Adjusting the Air Flow Direction Vertically  
Depending on the position of the indoor unit on the wall of your room,  
you can adjust the position of the outer air flow blade on the bottom of  
the unit, thus increasing the efficiency of the air conditioner.  
1
Press the SWING button one or more times as required.  
Result: The outer blade is adjusted vertically.  
RECOMMENDATION  
When...  
Adjust the blade to face...  
Cooling  
Upwards.  
2
If you want the blade to move up and down automatically when the air  
conditioner is operating, press the SWING button.  
Result: The blade move up and down, around the base position set.  
3
To stop the blade moving up and down, press the SWING button again.  
Note  
If you switch the air conditioner... Then the blade is...  
Off  
Closed completely.  
On again  
Set to the initial position powered.  
Adjusting the Air Flow Direction Horizontally  
There are two sets of inner air flow blades. Just as the outer air flow  
blade can be adjusted vertically, the inner blades can be adjusted  
horizontally.  
1
Adjust each set of inner blades to the required position, by pushing or  
pulling them sideways.  
E-15  
Setting the On Timer  
The On Timer enables you to switch on the air conditioner automatically  
after a given period of time. You can set the period of time from  
30 minutes to 24 hours.  
1
To set the operating time, press the ON TIMER button one or more times  
until the required time is displayed. Possible time is between 0.5 hour and  
24 hour inclusive.  
2
Press the  
(Set/Cancel) button to complete the setting.  
Result: The remaining time is displayed.  
Blinking of the timer indicator stops.  
The selected mode and the temperature on the display  
disappear after 10 seconds.  
The air conditioner will switch on automatically when the  
counter displayed on the remote control reaches the set time  
and disappears the On timer setting.  
3
To select an operating mode in advance, press the  
button until the  
desired mode is displayed at the top of the remote control.  
Result: The air conditioner will run in the selected mode when it is  
turned on.  
To Cancel the On Timer  
1
To cancel the On Timer, press the ON TIMER button one or more times  
until the timer setting disappears.  
2
Press the  
(Set/Cancel) button.  
Note  
If you want to turn on the air conditioner before the timer reaches  
the setting time, press the (ON/OFF) button.  
E-16  
Setting the Off Timer  
The Off Timer enables you to switch off the air conditioner automatically  
after a given period of time. You can set the period of time from  
30 minutes to 24 hours.  
1
To set the operating time, press the OFF TIMER button one or more times  
until the required time is displayed. Possible time is between 0.5 hour and  
24 hour inclusive.  
2
Press the  
(Set/Cancel) button to complete the setting.  
Result: The remaining time is displayed.  
Blinking of the timer indicator stops.  
The air conditioner will switch off automatically when the  
counter displayed on the remote control reaches the set time  
and disappears the Off timer setting.  
Example If you would like to turn the air conditioner on after 2 hours  
and to operate it for 2 hours:  
1. Press the ON TIMER button until ‘2.0 Hr’ is displayed.  
2. Press the (Set/Cancel) button.  
3. Press the OFF TIMER button until ‘4.0 Hr’ is displayed.  
4. Press the (Set/Cancel) button.  
Note  
You can see or change the setting mode and/or the temperature  
by pressing the MODE button or the TEMPERATURE buttons  
after setting the Off timer.  
To Cancel the Off Timer  
1
To cancel the Off Timer, press the OFF TIMER button one or more times  
until the timer setting disappears.  
2
Press the  
(Set/Cancel) button.  
Note  
If you want to turn off the air conditioner before the timer reaches  
the setting time, press the  
(ON/OFF) button.  
E-17  
Setting the Sleep Timer  
The Sleep Timer can be used when you are cooling your room to  
switch the air conditioner off automatically after a period of six hours.  
Note  
If you wish to switch the unit off at a specific time, refer to  
page 17.  
1
2
Make sure that you have selected either COOL mode.  
Press the  
button one or more times until  
appears on the  
remote control.  
Result: The indoor unit beeps.  
The air conditioner will be controlled as indicated in the  
illustrations below.  
Cooling The desired temperature is  
increased by 2°F/1°C every  
hour.  
When it has been increased  
by 4°F/2°C (after two hours),  
the temperature is maintained  
for four hours.  
To Cancel the Sleep Timer  
If you no longer wish to use the Sleep Timer that you have set, you  
can cancel it at any time.  
Press the  
Result:  
button.  
The indoor unit beeps.  
The  
The air conditioner operates normally.  
is no longer displayed.  
E-18  
Operating Recommendations  
Here are a few recommendations that you should follow when using  
your air conditioner.  
Topic  
Recommendation  
Power failure  
If a power failure occurs when the air  
conditioner is operating, the unit is switched off.  
When the power returns,  
◆◆A1◆  
◆◆A5◆  
◆◆A9◆  
◆◆AA◆  
you must press the (ON/OFF)  
button to restart it.  
◆◆A0◆  
◆◆A2◆  
◆◆A6◆  
◆◆AB◆  
the air conditioner starts up  
again automatically  
Note  
Be sure which model you have purchased because some  
air conditioners do not restart automatically.  
E-19  
Temperature and Humidity Ranges  
The following table indicates the temperature and humidity ranges  
within which the air conditioner can be used.  
If the air conditioner is used at... Then...  
High temperatures  
The automatic protection feature may  
be triggered and the air conditioner  
stopped.  
Low temperatures  
A water leak or some other malfunction  
may occur if the heat exchanger  
freezes.  
High humidity levels  
Water may condense on and drip  
from the surface of the indoor unit if it  
is used for long periods.  
Mode  
Outdoor Temperature  
Indoor Temperature Indoor Humidity  
Cooling  
70°F to 109°F approx.  
65°F to 90°F approx.  
21°C to 43°C approx.  
18°C to 32°C approx. 80% or less  
Drying  
65°F to 109°F approx.  
65°F to 90°F approx.  
18°C to 43°C approx.  
18°C to 32°C approx.  
-
◆◆ If the cooling operation is used at over 92°F/33°C(indoor temperature)  
then, it does not cool as its full capacity.  
E-20  
Cleaning Your Air Conditioner  
To get the best possible use out of your air conditioner, you must  
clean it regularly to remove the dust that accumulates on the air filter.  
Before cleaning your air conditioner, ensure that you  
have switched off the breaker used for the unit.  
IMPORTANT  
Model : AS07A5(A6)MA / AS09A5(A6)MA / AS12A5(A6)MC / AS12AA(AB)MC  
1
Open the front grille by lifting the tabs on the lower right and left sides of  
the indoor unit.  
2
3
Disassemble the front grille by pulling it forwards.  
Hold the edge of the air filter under the front grille and pull to release them.  
Remove all dust on the air filters with a vacuum cleaner or brush.  
4
5
Clean the front panel with a damp cloth and mild detergent  
(do NOT use benzene, solvents or other chemicals).  
6
Reassemble the air filters and the front grille.  
Note  
◆◆ If you have not used the air conditioner for a long period  
of time, set the fan going for three to four hours to dry  
the inside of the air conditioner thoroughly.  
Model : AS18A5(A6)RC / AS18A9(A0)RCD / AS24A1(A2)RC  
1
Open the front grille by pulling on the tabs on the lower right and left  
sides of the indoor unit.  
2
3
4
Lift out the bottom edge of the air filters and pull down to release them.  
Remove all dust on the air filters with a vacuum cleaner or brush.  
When you have finished, insert the top part of the filters into their slot  
and push down on the bottom edge until they click into place.  
5
Clean the front panel with a damp cloth and mild detergent  
(do NOT use benzene, solvents or other chemicals).  
Note  
◆◆ If you have not used the air conditioner for a long period  
of time, set the fan going for three to four hours to dry  
the inside of the air conditioner thoroughly.  
Hook  
Front grille  
Body groove  
E-21  
Solving Common Problems  
Before contacting the after-sales service, perform the following simple checks.  
They may save you the time and expense of an unnecessary call.  
Problem  
Explanation/Solution  
The air conditioner does not  
operate at all  
Check that the breaker used for the air conditioner is switched on.  
Check that the 5 Way indicator on the indoor unit is on;  
if necessary press the  
(On/Off) button on the remote control.  
Check whether the TIMER indicator on the indoor unit is switched on.  
If so:  
- Wait until the switch-on time is reached and the air conditioner starts  
up automatically  
- Cancel the timer (see pages 16 and 17 for further details)  
The air conditioner does not  
operate with the remote control  
Check that there are no obstacles between you and the indoor unit.  
Check the remote control batteries.  
Check that you are close enough to the indoor unit  
(seven metres/yards/23ft. or less).  
No beep is heard when you press  
Check that you are pointing the remote control at the remote control  
sensor in the right of the indoor unit.  
the  
(On/Off) on the remote  
control  
Replace the remote control batteries if necessary.  
The air conditioner does not cool  
Check that the correct operating mode has been selected  
(AUTO, COOL).  
The room temperature may be too low or too high.  
Dust may be blocking the air filter guard; refer to page 21 for cleaning  
instructions.  
Check that there is no obstacle in front of the outdoor unit.  
The fan speed does not change  
when you press the FAN button  
Check that the operating mode is set to COOL or FAN ;  
in the AUTO mode, the fan speed changes automatically and in the  
DRY mode, it is set to AUTO.  
The air flow direction does not  
change when you press the  
SWING button  
Check that the air conditioner has been switched on; if necessary,  
press the  
(On/Off) button on the remote control.  
The timer is not correctly triggered  
Check that the timer has been programmed correctly; see pages 16  
and 17.  
Odours are permeated in the room Air the room.  
during air conditioning  
E-22  
Installing a Filter (Option)  
The air conditioner can be fitted with a deodorizing and Bio-Pure  
filter to remove minute dust particles or odours. The service life of  
the filter is approximately three months depending on the time  
during which the air conditioner is used.  
1
Remove the vinyl packing from the filter.  
Note  
Do not remove the packing from a deodorizing filter until you  
wish to use the filter, as it will lose its properties.  
Deodorizing  
filter  
2
3
Insert the filter in the filter holder and press the three insert tabs until  
you hear a click.  
Bio-Pure Filter  
Open the front grille by pulling on the tabs on the lower right and left  
sides of the indoor unit.  
4
Take out the existing filter and replace it with the new one.  
E-23  
Technical Specifications  
MODEL  
Capacity Cooling  
SEER  
AS07A5(A6)MA  
AS09A5(A6)MA  
AS12A5(A6)MC  
Btu/h  
Pts/h  
7500  
10.0  
9000  
11500  
Performance  
Ratings  
10.0  
10.0  
Moisture Removal  
3
4
2.5  
214  
Air FLOW(Cooling, HIGH) CFM  
230  
51  
261  
53  
Sound Rating-Outdoor  
Power source  
dB  
50  
Electrical  
Data  
115V~, 60Hz  
6.4  
115V~, 60Hz  
8.5  
208-230V~, 60Hz  
A
Min.Ampacity  
6.1  
W
Cooling Watts  
680  
900  
1320  
Connections  
Flare  
Flare  
Flare  
Refrigeration  
Lines  
Liquid Line O. D.  
Suction Line O.D.  
Factory Pre-charge  
Max. Line length  
Max. Height Difference  
mm(in)  
mm(in)  
m(ft)  
6.35(1/4)  
9.52(3/8)  
5.0 ( 16 21 )  
15.0 ( 49 41 )  
6.35(1/4)  
9.52(3/8)  
5.0 ( 16 21 )  
15.0 ( 49 41 )  
7.0(23)  
6.35(1/4)  
12.70(1/2)  
5.0 ( 16 21 )  
15.0 ( 49 41 )  
7.0(23)  
m(ft)  
m(ft)  
7.0(23)  
AS07A5(A6)MA AS09A5(A6)MA AS12A5(A6)MC  
Dimensions  
& Weight  
INDOOR UNIT  
790 x 245 x 165 790 x 245 x 165 790 x 245 x 165  
mm(in)  
Ibs  
W X H X D  
( 31 18 921 621 ( 31 81 921 621 ( 31 18 921 621  
x
x
x
x
x
x
)
)
)
21.2  
21.2  
21.2  
Net Weight  
OUTDOOR UNIT  
US07A5(A6)MA US09A5(A6)MA US12A5(A6)MC  
660 x 497 x 235 660 x 497 x 235 762 x 532 x 280  
W X H X D  
Net Weight  
mm(in)  
Ibs  
1
1
( 26 x 19 12 94  
)
( 26 x 19 12 94  
)
( 30 x 20 78 11  
x
x
x
)
60.7  
61.7  
65.5  
Standard rating conditions Cooling  
Indoor  
Outdoor  
DB  
80  
26.7  
WB  
67  
DB  
95  
35.0  
WB  
75  
°F  
19.4  
23.9  
°C  
E-24  
MODEL  
Capacity Cooling  
SEER  
AS12AA(AB)MC  
AS18A5(A6)RC AS18A9(A0)RCD AS24A1(A2)RC  
Btu/h  
Pts/h  
11500  
10.0  
4
17500  
10.0  
4.2  
18000  
10.0  
4.9  
23500  
10.0  
Performance  
Ratings  
Moisture Removal  
5.4  
477  
59  
Air FLOW(Cooling, HIGH) CFM  
261  
55  
477  
55  
456  
57  
Sound Rating-Outdoor  
Power source  
dB  
Electrical  
Data  
208-230V~, 60Hz 208-230V~, 60Hz 208-230V~, 60Hz 208-230V~, 60Hz  
A
5.4  
8.6  
8.0  
Min.Ampacity  
10.5  
2350  
W
Cooling Watts  
1230  
1900  
1770  
Connections  
Flare  
Flare  
Flare  
Flare  
Refrigeration  
Lines  
Liquid Line O. D.  
Suction Line O.D.  
Factory Pre-charge  
Max. Line length  
Max. Height Difference  
mm(in)  
mm(in)  
m(ft)  
6.35(1/4)  
12.70(1/2)  
5.0 ( 16 21 )  
15.0 ( 49 41 )  
7.0(23)  
6.35(1/4)  
12.70(1/2)  
5,0 ( 16 21 )  
15.0 ( 49 41 )  
7.0(23)  
6.35(1/4)  
12.70(1/2)  
7.5( 24 85 )  
15.0 ( 49 41 )  
7.0(23)  
6.35(1/4)  
15.88(5/8)  
5.0 ( 16 21 )  
20.0 ( 65 21 )  
m(ft)  
1
8.0 (  
26 4  
)
m(ft)  
AS12AA(AB)MC AS18A5(A6)RC AS18A9(A0)RCD AS24A1(A2)RC  
Dimensions  
& Weight  
INDOOR UNIT  
790 x 245 x 165 1080 x 275 x 204 1080 x 275 x 204 1080 x 275 x 204  
mm(in)  
W X H X D  
Net Weight  
( 31 18 921 621  
21.2  
( 42 12 11 x 8 )  
x
( 42 12 11 x 8 ) ( 42 12 11 x 8 )  
29.7 29.7  
x
x
)
x
x
29.7  
Ibs  
OUTDOOR UNIT  
US12AA(AB)MC US18A5(A6)RC US18A9(A0)RCD US24A1(A2)RC  
740 x 530 x 230 880 x 638 x 310 787 x 620 x 320 880 x 638 x 310  
W X H X D  
Net Weight  
mm(in)  
Ibs  
1
1
1
3
1
1
1
( 29 x  
x
)
34 2 x 25 8 x12 4  
x 24 8 x 12 58 34 2 x 25 8 x12 4  
3
(
)
( 31  
) (  
)
20 4  
9
71.5  
105.8  
98.1 138.9  
E-25  
INSTALLATION  
MANUAL  
E-26  
Contents  
PREPARING THE INSTALLATION  
Deciding on Where to Install the Air Conditioner . . . . . . . . . . . 28  
Air Conditioner and Accessories . . . . . . . . . . . . . . . . . . . . . . . 30  
INSTALLING THE INDOOR UNIT  
Fixing the Installation Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Purging the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Connecting the Assembly Cable . . . . . . . . . . . . . . . . . . . . . . . 32  
Installing and Connecting the Indoor Unit Drain Hose . . . . . . 34  
Installing and Connecting the Indoor Unit Assembly Piping . . 35  
Cutting/Extending the Piping . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
INSTALLING THE OUTDOOR UNIT  
Connecting the Cables to the Outdoor Unit . . . . . . . . . . . . . . 37  
Auxillary Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Electrical Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Checking Correct Earthing . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Fixing the Unit in Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
COMPLETING THE INSTALLATION  
Connecting Up and Purging the Circuit . . . . . . . . . . . . . . . . . . 41  
Performing Leak Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Placing the Indoor Unit in Position . . . . . . . . . . . . . . . . . . . . . 43  
Checking and Testing Operations . . . . . . . . . . . . . . . . . . . . . . 44  
Explaining Operations to the Owner . . . . . . . . . . . . . . . . . . . . 45  
E-27  
PREPARING THE INSTALLATION  
Deciding on Where to Install the Air Conditioner  
When deciding on the location of the air conditioner with the owner, the following restrictions  
must be taken into account.  
General  
Do NOT install the air conditioner in a location where it will come into contact with the following elements:  
Combustible gases  
Saline air  
Machine oil  
Sulphide gas  
Special environmental conditions  
If you must install the unit in such conditions, first consult your dealer.  
Indoor Unit  
There must be no obstacles near the air inlet and outlet.  
Install the indoor unit on a surface that can support its weight.  
Choose a position that enables the piping and cables to be easily connected to the outdoor unit and the  
recommended length of 5m (16ft. 5in) to be respected (“L” m/ft. maximum).  
Leave enough clearance beneath the indoor unit to enable the filters to be removed without hindrance.  
Maintain sufficient clearance around the indoor unit, as indicated in the diagram on the page opposite.  
Make sure that the water dripping from the drain hose runs away correctly and safely.  
Outdoor Unit  
The outdoor unit must NEVER be placed on its side or upside down, as the compressor lubrication oil will run into the  
cooling circuit and seriously damage the unit.  
Choose a location that is dry and sunny, but not exposed to direct sunlight or strong winds.  
Do not block any passageways or thoroughfares.  
Choose a location where the noise of the air conditioner when running and the discharged air do not disturb any  
neighbours.  
Choose a position that enables the piping and cables to be easily connected to the indoor unit and the recommended  
length of 5m (16ft. 5in) to be respected (“L” m/ft. maximum).  
Install the outdoor unit on a flat, stable surface that can support its weight and does not generate any unnecessary  
noise and vibration.  
Position the outdoor unit so that the air flow is directed towards the outside, as indicated by the arrows on the top of  
the unit.  
Maintain sufficient clearance around the outdoor unit, as indicated in the diagram on the page opposite.  
If the outdoor unit is installed at a height, ensure that its base is firmly fixed in position; the maximum height is  
“H”m/ft. (“H”: indicated in the diagram on the page opposite.)  
Make sure that the water dripping from the drain hose runs away correctly and safely.  
CAUTION  
You have just purchased a split-type room air conditioner and it has  
been installed by your installation specialist.  
This device must be installed according to the national electrical rules.  
E-28  
PREPARING THE INSTALLATION  
Respect the clearances and maximum lengths indicated in the diagram below when installing the unit.  
30mm(1inch) or more  
125mm  
(5inch)  
or more  
125mm(5inch)  
or more  
Wrap the refrigerant pipes and the drain  
hose up in the absorbent pad and the  
vinyl tape; refer to page 43.  
“H” m/ft. maximum  
600mm  
(24inch)  
minimum  
“L” m/ft.  
maximum  
100mm(4inch)  
minimum  
100mm  
Unit : m(ft.)  
Model  
(4inch)  
minimum  
L
H
350mm(14inch)  
minimum  
◆◆07/0915(49ft 3in)  
◆◆1215(49ft 3in)  
◆◆1815(49ft 3in)  
7(23ft)  
7(23ft)  
7(23ft)  
600mm  
(24inch)  
minimum  
◆◆2420(65ft 7in) 8(26ft 3in)  
The designs of the unit and the connection valve are subject to change according to the model.  
E-29  
PREPARING THE INSTALLATION  
Air Conditioner and Accessories  
The following accessories are supplied with the air conditioner.  
The quantities are indicated in parentheses.  
Accessories in the Indoor Unit Case  
Installation Plate (1) Remote Control (1)  
Batteries for  
Remote Control (2)  
Owner’s Instruction  
Booklet & Installation  
Manual (1)  
S
ION  
UCT  
STR  
'S IN  
NER  
OW  
O
NES  
CIO  
C
TRU  
INS  
L'US  
ER  
ÇÕE  
TRU  
DE  
UAL  
MAN  
NI  
P
UZIO  
ISTR  
S
INS  
DE  
UAL  
MAN  
IO  
N
SAT  
TILI  
D'U  
UEL  
MAN  
EI  
SUNG  
ANW  
CHS  
RAU  
GEB  
ner  
Splut-type Room Air Conditio  
ado doméstico sistema  
S
p
ariat te  
l
ndicion  
t
à
S
e
Aire aco  
Condizi  
Aparel  
d'aria per ambienti ad uni  
tipo Split  
ho de ar condicionad  
onatore  
o
Climatiseur de type séparé  
age  
raumklimaanl  
e
Geteilt  
Remote controller  
holder (1)  
Screws (2)  
Accessories in the Outdoor Unit Case  
Rubber Leg (4)  
Flare Nuts, 6.35mm(1/4˝)  
outer pipe diameter (2)  
Flare Nuts,9.52mm(3/8˝)  
outer pipe diameter (2)  
(07/09)  
Flare Nuts, 12.70mm(1/2˝)  
outer pipe diameter (2)  
Flare Nuts, 15.88mm(5/8˝)  
outer pipe diameter (2)  
(24)  
(12/18)  
The assembly cable is depending on the option. [If they are not supplied, Using the  
standard cable.(approved according to IEC standard.)]  
E-30  
INSTALLING THE INDOOR UNIT  
Fixing the Installation Plate  
Before fixing the installation plate to a wall or window frame, you  
9
2
must determine the position of the 65mm( 16 inch) hole through  
which the cable, piping and hose pass to connect the indoor unit up  
to the outdoor unit. When facing the air conditioner in position on  
the wall, the piping and cable can be connected from the:  
Right  
Left  
◆◆07/09/12◆  
Rear (right or left)  
Installation plate  
Unit : mm(inch)  
1
2
Determine the position of the pipe and drain hose hole using the right  
9
figure and drill the hole with an inner diameter of 65mm(  
slants slightly downwards.  
inch) so that it  
2 16  
Pipe Hole  
065mm(2 16  
9
)
If you are fixing the indoor unit to a...  
Then follow Steps...  
Unit : mm(inch)  
Wall  
3.  
Window frame  
4 to 6.  
252 (10)  
(11)  
275  
3
Fix the installation plate to the wall in a manner appropriate to the weight  
of the indoor unit.  
5
8
1
2
90(3  
)
140 (5  
)
If you are mounting the plate on a concrete wall with anchor bolts, the  
3
Unit : mm(inch)  
anchor bolts must not project by more than 20mm( inch).  
4
4
5
Determine the positions of the wooden uprights to be attached to the  
window frame.  
◆◆18/24◆  
Attach the wooden uprights to the window frame in a manner appropriate  
to the weight of the indoor unit.  
Installation plate  
Unit : mm(inch)  
Pipe Hole  
065mm(2 16  
6
Using tapped screws, attach the installation plate to the wooden uprights,  
as illustrated in the last figure opposite.  
9
)
Unit : mm(inch)  
3
4
325 (12  
)
255 (10)  
3
8
512 (20)  
415 (16  
)
Unit : mm(inch)  
E-31  
INSTALLING THE INDOOR UNIT  
Purging the Unit  
On delivery, the indoor unit is loaded with an inert gas. All this gas  
must therefore be purged before connecting the assembly piping.  
To purge the inert gas, proceed as follows.  
Unscrew the caps at the end of each pipe.  
Result: All inert gas escapes from the indoor unit.  
To prevent dirt or foreign objects from getting into the pipes  
during installation, do NOT remove the caps completely  
until you are ready to connect the piping.  
Connecting the Assembly Cable  
The outdoor unit is powered from the indoor unit via the assembly cable.  
If the outdoor unit is more than five metres away from the indoor unit, the  
cable must first be extended to a maximum of “L”m/ft.  
1
2
Extend the assembly cable if necessary.  
Open the front grille by pulling on the tabs on the lower right and left sides of  
the indoor unit; if necessary, refer to page 21.  
The designs and shape are subject to  
change according to the model.  
3
Remove the screw securing the connector cover, then open the connector  
cover.  
Connector  
cover  
4
Remove three screws securing the front panel, then detach the front panel  
from the indoor unit.  
E-32  
INSTALLING THE INDOOR UNIT  
Connecting the Assembly Cable (cont.)  
5
Detach the control box from the indoor unit.  
6
7
Install the conduit kit. (The conduit kit is optional)  
Pass the assembly cable through the rear of the indoor unit and connect the  
assembly cable to terminals as shown in the figure.  
Control Box  
Each wire is labelled with the corresponding terminal number.  
9
8
9
Pass the other end of the cable through the 65mm(  
wall.  
inch) hole in the  
2 16  
A
Reinstall the control box, then tighten the C screw.  
The C screw is provided with this manual.  
10  
11  
Install the D terminal block cover, tightening the E screws.  
The D terminal block cover and E screws are provided with this manual.  
B
The conduit kit is optional(A and B).  
Replace the front panel, carefully tightening the screws.  
Reinstall the front grille.  
12  
13  
For further details on how to plug the other end of the assembly cable into  
the outdoor unit, refer to page 37.  
Control Box  
C
E
Terminal  
block  
cover  
D
AS12A5(A6)MC  
◆◆07/09/ AS12AA(AB)MC AS18A5(A6)RC  
AS18A9(A0)RCD / AS24A1(A2)RC  
Indoor  
unit  
Indoor  
unit  
Indoor  
unit  
Indoor  
unit  
E
E
E
E
E
E
E
E
(A)  
N1  
1
1
2
3
N
N
L
1
1
L1 L2  
A
B
B
1
1
2
2
3
4
A
B
B
1
1
2
2
3
3
4
A
A
L
L1  
L2  
A
A
B
B
2
2
3
E
1
E
1
E
N
L
1
E
L1  
L2  
1
Outdoor  
unit  
Outdoor  
unit  
Outdoor  
unit  
Outdoor  
unit  
Earth  
terminal  
Earth  
terminal  
Earth  
terminal  
Earth  
terminal  
E-33  
INSTALLING THE INDOOR UNIT  
Installing and Connecting the Indoor Unit Drain Hose  
Care must be taken when installing the drain hose for the indoor unit to ensure that any  
condensation water is correctly drained outside. When passing the drain hose through  
9
the 65mm(  
inch) hole drilled in the wall, check that none of the following situations occur.  
2 16  
5cm  
(2inch)  
less  
Ditch  
The hose must  
NOT slope  
upwards.  
The end of the drain  
hose must NOT be  
placed in water.  
Do NOT bend the  
hose in different  
directions.  
Keep a clearance of at  
least 5cm(2inch)  
between the end of the  
hose and the ground.  
Do NOT place the  
end of the drain hose  
in a hollow.  
To install the drain hose, proceed as follows.  
1
2
If necessary, connect the 2m(6ft. 7in) extension to the drain hose.  
Shield  
If you are using the extension, insulate the inside part of the extension  
drain hose with a shield.  
Drain hose  
Extension drain hose  
3
4
Pass the drain hose under the refrigerant piping, taking care to keep the  
drain hose tight.  
Pass the drain hose through the hole in the wall, making sure that it is  
sloping downwards, as shown in the illustrations above.  
The hose will be fixed permanently into position once the  
whole installation has been tested for gas leaks; refer to  
page 43 for further details.  
E-34  
INSTALLING THE INDOOR UNIT  
Installing and Connecting the Indoor Unit Assembly Piping  
There are two refrigerant pipes of different diameters:  
A smaller one for the liquid refrigerant  
A larger one for the gas refrigerant  
A short length of piping is already fitted to the air conditioner. You  
must extend this piping using assembly piping (optionally supplied).  
The connection procedure for the refrigerant piping varies according  
to the exit position of the piping from the indoor unit, as seen when  
facing the air conditioner in position on the wall:  
Right (A)  
Left (B)  
Rear  
1
With a knife, cut out the appropriate knock-out piece on the rear of the  
indoor unit (unless you are connecting directly from the rear).  
B
A
2
3
Smooth the cut edges.  
Remove the protection caps on the pipes and connect the assembly piping  
to each pipe, tightening the nuts, first manually and then with a wrench,  
applying the following torque.  
Pipe  
Outer Diameter  
6.35 mm(1/4˝)  
9.52 mm(3/8˝)  
12.70 mm(1/2˝)  
15.88 mm(5/8˝)  
Torque  
Liquid refrigerant  
Gas refrigerant  
Gas refrigerant  
Gas refrigerant  
160kgcm(11.6ftlb )  
300kgcm(21.8ftlb )  
500kgcm(36.4ftlb )  
700kgcm(50.6ftlb )  
If the piping must be shortened or extended, refer to page 36.  
4
5
Cut off any excess foam insulation.  
If necessary, bend the pipe round, along the bottom of the indoor unit and  
out through the appropriate hole, taking care to ensure that:  
The piping does not jut out from the rear of the indoor unit  
The bending radius is 100mm (4inch) or more  
6
7
Pass the piping through the hole in the wall.  
For further details on how to connect up to the outdoor unit and purge the  
circuit, refer to page 41.  
The piping will be insulated and fixed permanently into  
position once the whole installation has been tested for  
gas leaks; refer to page 43 for further details.  
E-35  
INSTALLING THE INDOOR UNIT  
Cutting/Extending the Piping  
Five metres(16ft 5in) of piping is supplied with the air  
conditioner(Optional). This length can if necessary be:  
Extended to a maximum of “L” m/ft.  
Shortened as required  
If more than 5m(16ft 5in) of piping is required:  
The assembly cable must also be extended  
Refrigerant must be added to the circuit by an  
approved installer; otherwise, the indoor unit may  
freeze  
1
2
Make sure that you have the required tools available  
(pipe cutter, reamer, flaring tool and pipe holder).  
If you wish to shorten the piping, cut it using a pipe cutter, taking care to  
ensure that the cut edge remains at a 90° angle with the side of the pipe,  
and referring to the illustrations below for examples of edges cut correctly  
and incorrectly.  
90  
O
Oblique  
Rough  
Burr  
O
x
x
x
3
4
To prevent any gas from leaking out, remove all burrs at the cut end of the  
pipe, using a reamer.  
Slide a flare nut on to the pipe and modify the flare.  
Pipe  
Outer Diameter (D)  
6.35 mm(1/4˝)  
Depth (A)  
Liquid refrigerant  
Gas refrigerant  
Gas refrigerant  
Gas refrigerant  
1.3 mm(1/16˝)  
1.8 mm(1/16˝)  
2.0 mm(1/16˝)  
2.2 mm(1/8˝)  
9.52 mm(3/8˝)  
12.70 mm(1/2˝)  
15.88 mm(5/8˝)  
5
Check that the flaring is correct, referring to the illustrations below for  
examples of incorrect flaring.  
Inclined  
Damaged Surface  
Cracked  
Uneven Thickness  
6
Align the pipes to be connected and tighten the flare nuts first manually  
and then with a wrench, applying the following torque.  
Pipe  
Outer Diameter  
6.35 mm(1/4˝)  
9.52 mm(3/8˝)  
12.70 mm(1/2˝)  
15.88 mm(5/8˝)  
Torque  
Liquid refrigerant  
Gas refrigerant  
Gas refrigerant  
Gas refrigerant  
160kgcm(11.6ftlb )  
300kgcm(21.8ftlb )  
500kgcm(36.4ftlb )  
700kgcm(50.6ftlb )  
7
For further details on how to connect up to the outdoor unit and purge the  
circuit, refer to page 41.  
E-36  
INSTALLING THE OUTDOOR UNIT  
Connecting the Cables to the Outdoor Unit  
One electric cable must be connected to the outdoor unit:  
◆◆07/09◆  
The assembly cable connecting the indoor unit to the outdoor unit  
1
2
Remove the terminal board cover on the side of the outdoor unit.  
Connect the assembly cable to terminals as shown in the figure.  
Each wire is labelled with the corresponding terminal number.  
Each wire from the terminal number of the indoor unit.  
Shall be comected with the same terminal number of its  
outdoor unit.  
AS12A5(A6)MC  
AS12AA(AB)MC  
◆◆18/24◆  
3
4
Connect the earth wires to the earth terminals.  
Refer to the page 39 for further details on how to check  
that earthing is correct.  
Replace the terminal board cover, carefully tightening the screw.  
AS18A5(A6)RC  
AS18A9(A0)RCD / AS24A1(A2)RC  
AS12A5(A6)MC  
◆◆07/09/ AS12AA(AB)MC  
E
E
E
Indoor  
unit  
Indoor  
unit  
Indoor  
unit  
E
E
Indoor  
unit  
E
A
B
1
2
3
4
A
B
1
2
3
4
(A)  
N1  
1
2
3
N
L
1
1
L1 L2  
A
B
2
2
3
1
A
B
1
E
1
N
L
L1  
L2  
E
E
E
E
E
A
A
B
B
1
1
2
2
1
1
2
2
3
A
A
B
B
1
1
L
L
L1  
L2  
N
Outdoor  
unit  
Outdoor  
unit  
Outdoor  
unit  
Outdoor  
unit  
3
4
L1 L2  
3
4
L1 L2  
N
N
1
2
3
L1 L2  
1
2
3
Earth  
terminal  
Earth  
terminal  
L2  
L1  
L1  
L2  
E
E
L
L2  
E
L1  
E
Earth  
terminal  
Earth  
terminal  
Circuit Breaker(Main Power)  
Circuit Breaker(Main Power)  
Circuit Breaker(Main Power)  
Circuit Breaker(Main Power)  
E-37  
INSTALLING THE OUTDOOR UNIT  
Auxiliary Circuit Breaker  
Auxiliary circuit breaker should be installed near outdoor unit so  
that each access is possible. Main/outdoor power supply cable are  
connected to upper/lower terminal of auxiliary circuit breaker.  
Distribution  
board  
Outdoor unit  
It is necessary that the conduit kit for power supply to the outdoor  
unit be installed between auxiliary power S/W and the outdoor  
unit. (the conduit kit is optional)  
Auxiliary  
power s/w  
The designs and shape are subject to  
change according to the model.  
Electrical Work  
1
The supply voltage must be the same as the rated voltage of the  
air conditioner.  
2
3
Prepare the power souce for exclusive use with the air conditioner.  
Use 15 amperes time delay fuse or circuit breaker.  
MODEL  
AS07A5(A6)MA  
AS09A5(A6)MA  
AS12A5(A6)MC  
Power supply  
115V~/60Hz  
Single phase  
115V~/60Hz  
Single phase  
208-230V~/60Hz  
Single phase  
Power cable  
3G AWG 14  
4G AWG 16  
8.5  
Assembly cable  
Operating current(C)  
Starting Current  
6.4  
32A  
6.1  
31A  
47A  
Power consumption (C)  
680W  
900W  
1320W  
AS12AA(AB)MC AS18A5(A6)RC AS18A9(A0)RCD AS24A1(A2)RC  
MODEL  
Power supply  
208-230V~/60Hz 208-230V~/60Hz 208-230V~/60Hz 208-230V~/60Hz  
Single phase  
Single phase  
Single phase  
Single phase  
Power cable  
3G AWG 14  
Assembly cable  
4G AWG 16  
5.4  
5G AWG 16  
8.6A  
6G AWG 16  
8.0A  
Operating current(C)  
Starting Current  
10.5A  
10.5A  
31A  
35A  
37A  
Power consumption (C)  
1230W  
1900W  
1770W  
2350W  
When using the special NFB, use the NFB to bear the capacity of the  
air conditioner.  
E-38  
Otherwise, the shot circuit in the NFB may occur.  
INSTALLING THE OUTDOOR UNIT  
Checking Correct Earthing  
If the power distribution circuit does not have an earth or the earth  
does not comply with specifications, an earthing electrode must be  
installed. The corresponding accessories are not supplied with the air  
conditioner.  
1
Select an earthing electrode that complies with the specifications given in  
the illustration opposite.  
Carbon  
plastic  
Steel  
core  
To  
earthing  
screw  
2
Determine a suitable location for the earthing electrode:  
PVC-insulated green/  
yellow wire, 2mm2 x 3.5 m  
In damp hard soil rather than loose sandy or gravel soil that has a  
higher earthing resistance  
Away from underground structures or facilities, such as gas pipes,  
water pipes, telephone lines and underground cables  
At least 2m(6ft 7in) away from a lightening conductor earthing  
electrode and its cable  
Unit : cm(inch)  
3
4
50(19  
)
The earthing wire for the telephone line cannot be used to  
earth the air conditioner.  
3
4
Dig a hole of the size indicated in the illustration opposite, drive the  
earthing electrode into position and cover the top of the electrode  
with the excavated soil.  
1
Install a green/yellow insulated earthing wire (  
2 mm2 or greater):  
Ø
1.6 mm/ 16 ˝, section  
If the earthing wire is too short, connect an extension lead, soldering  
the connection and wrapping it with insulating tape (do not bury the  
soldered connection)  
Secure the earthing wire in position with staples  
If the earthing electrode is installed in an area of heavy traffic,  
its wire must be connected securely.  
5
6
Carefully check the installation, by measuring the earthing resistance with  
an earthing resistance tester. If the resistance is above the required level,  
drive the earthing electrode deeper into the ground or increase the number  
of earthing electrodes.  
The designs and shape are subject to  
change according to the model.  
Connect the earthing wire to the earthing screw on the air conditioner.  
The designs and shape are subject  
to change according to the model.  
E-39  
INSTALLING THE OUTDOOR UNIT  
Fixing the Unit in Position  
The outdoor unit must be installed on a rigid and stable base to avoid any increase  
in the noise level and vibration, particularly if the outdoor unit is to be installed close  
to a neighbour. If it is to be installed in a location exposed to strong winds or at a  
height, the unit must be fixed to an appropriate support (wall or ground).  
X
1
2
3
Position the outdoor unit so that the air flow is directed towards the  
outside, as indicated by the arrows on the top of the unit.  
Attach the outdoor unit to the appropriate support using anchor bolts.  
Rubber leg  
Unit : mm(inch)  
Model  
X
Y
If the outdoor unit is exposed to strong winds, install shield plates around  
the outdoor unit, so that the fan can operate correctly.  
3
8
◆◆07/09◆  
AS12A5(A6)MC  
AS12AA(AB)MC  
493.7(  
)
254(10)  
19  
7
5
555(  
506(  
)
)
295(  
11 8  
)
)
21  
19  
8
7
7
252(  
9 8  
8
AS18A5(A6)RC  
AS24A1(A2)RC  
3
660(26)  
340(  
)
)
13 8  
Certainly fix up its rubber leg, in order to prevent its vibration and noise.  
AS18A9(A0)RCD  
582(  
22 7  
)
338( 13 41  
8
E-40  
COMPLETING THE INSTALLATION  
Connecting Up and Purging the Circuit  
The outdoor unit is loaded with sufficient R22 refrigerant for 5m(16ft 5in) of  
piping. The air in the indoor unit and in the pipe must be purged.  
If air remains in the refrigeration pipes, it will affect the compressor,  
reduce to cooling capacity and could lead to a malfunction.  
Refrigerant for air purging is not charged in the outdoor unit.  
Use Vacuum Pump as shown at the figure.  
1
Connect each assembly pipe to the appropriate valve on the outdoor unit  
and tighten the flare nut.  
Outdoor unit  
Indoor unit  
Gas pipe side  
A
C
2
Referring to the illustration opposite, tighten the flare nut first manually  
and then with a wrench, applying the following torque.  
Liquid pipe side  
B
D
Pipe  
Outer Diameter  
6.35 mm(1/4˝)  
9.52 mm(3/8˝)  
12.70 mm(1/2˝)  
15.88 mm(5/8˝)  
Torque  
Liquid refrigerant  
Gas refrigerant  
Gas refrigerant  
Gas refrigerant  
160kgcm(11.6ftlb )  
300kgcm(21.8ftlb )  
500kgcm(36.4ftlb )  
700kgcm(50.6ftlb )  
3
4
5
Connect the charging hose of low pressure side of manifold gauge to the  
packed valve having a service port as shown at the figure.  
Open the valve of the low pressure side of manifold gauge  
counterclockwise.  
Purge the air from the system using vacuum pump for about 10 minutes.  
-
-
-
-
-
-
Close the valve of the low pressure side of manifold gauge clockwise.  
Make sure that pressure gauge show -0.1MPa(-76cmHg) after about  
10minutes.  
This procedure is very important in order to avoid gas leak.  
Turn off the vacuum pump  
Remove the hose of the low pressure side of manifold gauge.  
Vacuum Pump  
6
7
8
Set valve cork of both liquid side and gas side of packed valve to the open  
position.  
The designs and shape are subject to  
change according to the model.  
Mount the valve stem nuts and the service port cap to the valve, and  
tighten them at the torque of 18Nm with a torque wrench.  
B
A
(gas)  
(liquid)  
Check for gas leakage.  
-
At this time, especially check for gas leakage from the 3-way valves  
stem nuts, and from the service port cap.  
Adding Refrigerant  
Refrigerant must be added if the piping measures more than 5m(16ft 5in) in length.  
This operation can only be performed by a qualified refrigeration specialist.  
Valve stem  
Stem cap  
If you have used...  
Then...  
More than 5m(16ft 5in)  
of piping  
Aof refrigerant (R22)  
must be added for each  
extra m(3ft.)  
Model  
A”  
20g  
30g  
40g  
◆◆07/09◆  
◆◆12/18◆  
◆◆24◆  
Less than 5m(16ft 5in)  
of piping  
The purge time is normal.  
Refer to the Service Manual for more details on this operation.  
E-41  
COMPLETING THE INSTALLATION  
Performing Leak Tests  
Before completing the installation (insulation of the cables, hose and  
piping and fixing of the indoor unit to the installation plate), you must  
check that there are no gas leaks.  
C
D
To check for gas leaks on the...  
Then, using a leak detector,  
check the...  
Indoor unit  
Flare nuts at the end of sections  
C and D.  
Outdoor unit  
Valves on sections A and B.  
B
A
The designs and shape are subject to  
change according to the model.  
A
B
The designs and shape are subject to  
change according to the model.  
E-42  
COMPLETING THE INSTALLATION  
Placing the Indoor Unit in Position  
Once you have checked that there are no leaks in the system, you can insulate  
the piping, hose and cables and place the indoor unit on the installation plate.  
1
To avoid condensation problems, place heat-resistant polyethylene foam  
separately around each refrigerant pipe in the lower part of the indoor unit.  
2
Wrap the refrigerant pipes and the drain hose located at the rear of the  
indoor unit up in the absorbent pad.  
Triply wind the pipes and hose to the end of the indoor unit with  
3
the absorbent pad (make intervals of 20mm / inch).  
4
3
4
Wind insulating tape around the pipes, assembly cable and drain hose.  
Place the resulting bundle carefully in the lower part of the indoor unit,  
making sure that it does not jut out from the rear of the indoor unit.  
Installation plate  
5
6
7
Hook the indoor unit on to the installation plate and move the unit to the  
right and left until you are sure that it is securely in place.  
Finish wrapping vinyl tape around the rest of the piping leading to the  
outdoor unit.  
Using clamps (optionally supplied), attach the piping to the wall wherever  
possible.  
E-43  
COMPLETING THE INSTALLATION  
Checking and Testing Operations  
To complete the installation, perform the following checks and tests  
to ensure that the air conditioner is operating correctly.  
1
Review all the following elements in the installation:  
Installation site strength  
Piping connection tightness to detect any gas leakages  
Connection wiring  
Heat-resistant insulation of the piping  
Drainage  
Earthing wire connection  
Correct operations (follow the steps below)  
2
Press the On/Off button.  
Result:  
The indicator lights on the indoor unit flash at  
half-second intervals.  
While the indoor unit opens, the indoor unit fan runs  
to start.  
3
Press the  
Result:  
button.  
The outdoor unit operates in cooling mode as  
following the room temperature.  
4
Air flow direction  
Press the  
button and check that the air  
flow blades work properly.  
E-44  
COMPLETING THE INSTALLATION  
Explaining Operations to the Owner  
Before leaving the premises on which you have installed the air conditioner,  
you should explain the following operations to the owner, making  
reference to the appropriate pages in the owner’s instruction booklet.  
1
How to start and stop the air conditioner.  
2
How to select the operating mode and adjust the temperature and fan  
settings.  
3
4
How to adjust the air flow direction.  
How to set the timers.  
5
How to remove and clean the filters.  
Once the owner is happy with the basic operations, hand over the owner’s  
instruction booklet and this installation manual for storage in a handy and safe  
place.  
E-45  
THIS AIR CONDITIONER IS MANUFACTURED BY:  
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:  
CE CLIMATISEUR EST FABRIQUE PAR:  
ELECTRONICS  
Printed in Korea  

Panasonic Kx Tg1855 User Manual
Philips 5460nb User Manual
Precisionaire Washable Metal Filters Kkm User Manual
Sanyo 24kls72 User Manual
Sanyo Hr 4uc User Manual
Sanyo Kr 1000scl User Manual
Savin Mlp75n User Manual
Schumacher Ps 1022ma User Manual
Sharp Humidification Replacement Filter For Kc 850u Or Kc 860u Fz C100mfu User Manual
Whirlpool Ace184xr0 User Manual