Samsung Ap500pf User Manual

OWNER’S  
INSTRUCTIONS &  
INSTALLATION  
MANUAL  
AP500PF  
FLOOR STANDING TYPE AIR CONDITIONER  
( Cool )  
E S DB68-00054A(3)  
Contents  
N PREPARING YOUR AIR CONDITIONER  
I
I
I
I
I
I
I
Safety Precautions .........................................................................................................  
View of the Indoor Unit & Outdoor Unit .........................................................................  
Remote Control - Buttons ..............................................................................................  
Control Panel ..................................................................................................................  
Getting Started ...............................................................................................................  
Inserting the Remote Control Batteries .........................................................................  
Setting the Time .............................................................................................................  
2
4
5
5
6
7
8
N OPERATING YOUR AIR CONDITIONER  
I
I
I
I
I
I
I
I
I
Operating Preparation ....................................................................................................  
Using the Control Panel on the Indoor Unit ..................................................................  
Using the Remote Control .............................................................................................  
Selecting the Automatic Operating Mode ...................................................................... 10  
Cooling Your Room ......................................................................................................... 11  
Changing the Room Temperature Quickly .................................................................... 12  
Airing Your Room ............................................................................................................ 13  
Adjusting the Air Flow Direction Horizontally ................................................................ 14  
Adjusting the Air Flow Direction Vertically ..................................................................... 14  
9
9
9
N PROGRAMMING YOUR AIR CONDITIONER  
I
Setting the Off Timer ...................................................................................................... 15  
I
Cancelling the Off Timer ................................................................................................ 15  
N RECOMMENDATIONS FOR USE  
I
I
I
I
I
Operating Recommendation .......................................................................................... 16  
Temperature and Humidity Range ................................................................................. 16  
Cleaning Your Air Conditioner ........................................................................................ 17  
Solving Common Problems ........................................................................................... 18  
Technical Specification ................................................................................................... 19  
E-3  
View of the Indoor unit and Outdoor unit  
AIR FLOW(DIRECTION) ADJUSTING BLADE  
AIR OUTLET  
CONTROL PANEL  
AIR FILTER  
AIR INLET GRILLE  
To disassemble  
the air inlet grille  
N
Loosen two fixing screws of  
left and right. Hold the upper  
part of the air inlet grille, and  
then pull it lightly forward.  
AIR INLET  
ELECTRIC PARTS BOX  
AIR OUTLET  
CONNECTION VALVE  
E-4  
Remote Control - Buttons  
Temperature adjustment  
buttons  
Operating mode selection  
-AUTO COOL  
-COOL  
-TURBO  
-FAN  
Fan speed adjustment  
buttons  
Air flow swing button  
On/Off button  
Control Panel  
Fan Speed  
display  
Fan Speed  
adjustment  
Time/Temperature  
display  
Remote control  
Sensor  
Operating Light  
ON/OFF Button  
Power Light  
Timer adjustment  
Time or Temperature adjustment  
Time/Temperature  
Selection  
Operating Mode  
Selection  
E-5  
Getting Started  
You have just purchased a packaged air conditioner and it has been installed by  
your installation specialist.  
Your Ow ner's Instructions contain much valuable information on using your  
air conditioner. Please take the time to read them as they w ill help you take full  
advantage of the unit's features.  
The booklet is organized as follow s:  
N
The follow ing figures are show n on page 4 and page 5  
- Remote control (buttons)  
- Indoor unit  
- Outdoor unit  
They w ill help you find the buttons and understand the symbols displayed.  
N
In the main part of the document, you w ill find a series of step-by-step  
procedures for each function available.  
The illustrations in the step-by-step procedures use three different symbols:  
PRESS  
PUSH  
HOLD DOWN  
E-6  
Inserting the Remote Control Batteries  
You must insert or replace the remote control batteries w hen:  
N You purchase the air conditioner  
N The remote control does not w ork correctly  
Note Use tw o LR03(AAA) 1.5V batteries. Do not use old batteries,  
or different kinds of batteries together.  
Batteries may be completely discharged after 12 months,  
even if they have not actually been used.  
1
2
Push the battery cover on the rear of the remote control with your  
thumb in the direction of the arrow and remove it.  
Insert the two batteries, taking care to respect the polarities:  
N + on the battery with + on the remote control  
N - on the battery with - on the remote control  
3
Close the cover by sliding it back until it clicks into place.  
E-7  
Setting the Time  
You can set the time w hen you purchas the air conditioner.  
Nota Be sure to reset the time w hen you change clocks from standard  
todaylight saving time and vice versa.  
1
Press the TIME/TEMP. SELECT button.  
Result: The TIME indicator flashes.  
2
To set the current time, press the TIME/TEMP. LorM buttons.  
then ••  
To ••  
Press the(L)button.  
Hold down the(L)button.  
Press the(M)button.  
Hold down the(M)button.  
Increase the time in one-minute intervals  
Increase the time in ten-minute intervals  
Decrease the time in one-minute intervals  
Decrease the time in ten-minute intervals  
Result: N AM or PM are displayed to indicate whether the setting  
corresponds to a time before or after midday.  
N The clock is started after three seconds.  
E-8  
Operating Preparation  
Look around the indoor and outdoor units.  
Confirm if any obstacles that may prevent the air flow are present  
near the air conditioner.  
1
2
Remove a protective cover of the outdoor unit.  
Turn the power switch on.  
ON  
To operate the unit, the power switch is fitted to the  
wall must be set to ON.  
IMPORTANT  
Using the Control Panel on the Indoor Unit  
You can operate w ith indoor unit w hen you do not w ish to or cannot  
operate the air conditioner w ith the remote control.  
You can : Adapt the auto operating, cooling, fan and timer setting  
to your specific requirements ;  
See pages 10 to 15 for further details.  
Exemple : Remote control broken or lost.  
Note  
You must operate the off timer function with indoor unit.  
Using the Remote Control  
All air conditioner features except timer function can be controlled  
from your seat, by using the remote control.  
You can : Adapt the auto operating, cooling, turbo operating and fan set-  
tings to your specific requirements.  
Nota  
You must operate the turbo function with remote control.  
E-9  
Selecting the Automatic Operating Mode  
You can start the air conditioner in AUTO mode.  
1
If necessary, press the ON/OFF( ) button.  
Result:  
N
N
N
N
The power indicator on the control panel comes on.  
The indoor unit beeps twice.  
The operation mode previously set is displayed.  
The air conditioner starts up in the mode selected  
when the unit was last used.  
IMPORTANT The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
N
Switched on  
Stopped  
N
It will start up normally after a three-minute rest period.  
2
If the AUTO COOL indicator is not displayed, press MODE button one  
or more times until it appears.  
Result:  
N
N
The indoor unit beeps each time you press MODE.  
The air conditioner starts up in AUTO mode.  
To operate the unit by remote control, press the AUTO COOL button.  
Note  
In AUTO mode, the optimum fan speed is selected automatically  
and cannot be changed.  
N
You can change modes at any time.  
3
To control the air flow direction when necessary, refer to page 14.  
E-10  
CoolingYour Room  
You must select the COOL mode if you w ish to adjust the:  
N
N
Cooling temperature  
Fan speed w hen cooling  
1
If necessary, press the ON/OFF( ) button.  
Result:  
N
N
N
N
The power indicator on the control panel comes on.  
The indoor unit beeps twice.  
The operation mode previously set is displayed.  
The air conditioner starts up in the mode selected  
when the unit was last used.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
N
Switched on  
Stopped  
N
It will start up normally after a three-minute rest period.  
2
If the COOL indicator is not displayed, press the MODE button one  
or more times until it appears.  
Result:  
N
N
The indoor unit beeps each time you press MODE.  
The air conditioner starts up in COOL mode.  
To operate the unit by remote control, press the COOL button.  
Note You can change modes at any time.  
N
3
4
If the “SET TEMP” and “TEMP” indicators are not displayed,  
press the TIME/TEMP. SELECT button to appear it.  
To adjust the temperature, press the TIME/TEMP. L or M buttons  
one or more times until the required temperature is displayed.  
Possible temperature are between 18°C(65˚F) and 30°C(86˚F) inclusive.  
Result:  
N
Each time you press the TIME/TEMP. L or M.  
- The temperature is adjusted by 1°C(1˚F)  
- The indoor unit beeps.  
N
The air conditioner will only start cooling if the room  
temperature is higher than the selected temperature.  
5
Select the fan speed by pressing the FAN SPEED button one or more  
times until the required setting is displayed:  
Low  
Medium  
High  
To select the fan speed by remote control, press LOW, MID or HIGH buttons.  
Note  
Each time you press FAN SPEED, the indoor unit beeps.  
6
To control the air flow direction when necessary, refer to page 14.  
E-11  
Changing the Room Temperature Quickly  
The turbo function is used to cool your room as quickly as possible.  
Example: You have just come home and find that the room is very hot.  
You wish to cool it down as quickly as possible.  
The turbo function operates for 30 minutes with the maximum  
settings before returning automatically to the mode and  
temperature previously selected.  
The turbo function can be controlled by using remote control.  
1
If necessary, press the ON/OFF( ) button.  
Result:  
N
N
N
N
The power indicator on the control panel comes on.  
The indoor unit beeps twice.  
The operation mode previously set is displayed.  
The air conditioner starts up in the mode selected  
when the unit was last used.  
IMPORTANT The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
N
Switched on  
Stopped  
N
It will start up normally after a three-minute rest period.  
2
3
Check to see whether the operation mode is positioned at  
"AUTO COOL" or "COOL" ; the turbo operation cannot be selected  
when the unit is in the "FAN" operation mode.  
Press the TURBO button on the remote control.  
Remote control  
Note  
N
N
N
N
The tempeature and fan setting are adjusted automatically.  
The TURBO indicator on the control panel comes on.  
The air conditioner cools the room as quickly as possible.  
After 30 minutes, the air conditioner is reset automatically to the  
previous mode, temperature and fan settings.  
4
If you wish to stop the Turbo function before the end of the 30-minute  
period, press the TURBO button again.  
Result:  
N
The air conditioner is reset automatically to the  
previous mode.  
5
To control the direction of the air flow, refer to page 14.  
E-12  
AiringYour Room  
If the atmosphere in your room is stale,  
you can air the room using the Fan feature.  
1
If necessary, press the ON/OFF( ) button.  
Result:  
N
N
N
N
The power indicator on the control panel comes on.  
The indoor unit beeps twice.  
The operation mode previously set is displayed.  
The air conditioner starts up in the mode selected  
when the unit was last used.  
2
If the FAN indicator is not displayed, press the MODE button one  
or more times until it appears.  
Result:  
N
N
N
N
The indoor unit beep each time you press MODE.  
The FAN indicator on the control panel comes on.  
The air conditioner starts up in Fan mode.  
The temperature is set automatically.  
To operate the unit by remote control, press the FAN button.  
Note You can change modes at any time.  
3
Select the fan speed by pressing the FAN SPEED button one or more  
times until the required setting is displayed:  
Low  
Medium  
High  
To select the fan speed by remote control, press LOW, MID or HIGH buttons.  
Note  
Each time you change the fan setting, the indoor unit beeps.  
4
To control the direction of the air flow, refer to page 14.  
E-13  
Adjusting the Air Flow Direction Horizontally  
Depending on the position of the indoor unit, you can adjust  
the position of the air flow blades on the top of the unit,  
thus increasing the efficiency of the air conditioner.  
You can controll by using remote control.  
Remote control  
1
Press the AIR SWING button on the remote control.  
Result: The blades are moved between right and left.  
2
To stop the blades, press the AIR SWING button again.  
To set to the required position, press the AIR SWING button again  
when the blades are in the required position.  
Adjusting the Air Flow Direction Vertically  
J ust as the air flow blades can be adjusted vertically,  
they can also be adjusted by the hands.  
Set the horizontal blades in the disired direction.  
Note  
N
Effective control of air flow direction.  
• Adjust the blades to face upward for cooling.  
E-14  
Setting the Off Timer  
The Off Timer enables you to set the air conditioner to sw itch off  
automatically after a given period of time, by pressing one single button.  
The unit can be sw itched off automatically after one hour, tw o hours,  
three hours, four hours or five hours.  
You can controll by using indoor unit.  
1
If necessary, press the ON/OFF( ) button and select the operating mode.  
2
Press the TIMER button.  
Note Each time the button is pressed, the following are displayed sequentially:  
AM  
Result:  
N
N
The TIMER indicator is displayed.  
When the timer operation function starts, the remaining  
time is displayed.  
Cancelling the Off Timer  
If you no longer w ish to use the off timer function,  
you can cancel it at any time.  
Press the TIMER button one or more times until the room temperature  
or the current time is displayed.  
Result:  
N
N
The off timer is cancelled.  
The air conditioner operates normally.  
E-15  
Operating Recommendation  
Here is a recommendation that you should follow w hen using  
your air conditioner.  
TOPIC  
RECOMMENDATION  
Power failure  
If a power failure occurs when the air conditioner is  
operating, the unit is switched off.  
When the power returns, the air conditioner start up again  
automatically.  
Temperature and Humidity Range  
The follow ing table indicates the temperature and humidity ranges,  
w ithin w hich the air conditioner can be used.  
Mode Outdoor  
Temperature  
Indoor  
Temperature  
Indoor Humidity  
Cooling 21°C to 43°C approx. 18°C to 32°C approx. 80% or less  
(70˚F to 109˚F approx.) (65˚F to 90˚F approx.) If the unit is used for long  
periods at a high humidity  
level, water may condense  
on and drip from the  
surface of the unit.  
If the cooling operation is used at over 33˚C/92˚F(indoor temperature) then, does  
not a full capacity.  
E-16  
CleaningYour Air Conditioner  
To get the best possible use out of your air conditioner, you must clean  
it regularly to remove the dust that accumulates on the air filter.  
IMPORTANT Before cleaning your air conditioner, ensure that you have  
switched off the breaker used for the unit.  
1
2
Loosen two fixing screws of left and right.  
Pull the air inlet grille lightly and pull out the air filter in an upward  
direction to release them.  
Remove all dust on air filter with a vacuum cleaner or brush.  
In case of serious dust accumulation, put the air filter in warm detergent  
water and shake it vertically.  
3
4
Dry the air filter.  
When you have finished, insert the bottom part of the filter into  
their slot and push down until they click into place.  
5
Clean the front panel with the damp cloth and mild detergent  
(do not use benzene, solvents or other chemicals).  
Note  
If you have not used the air conditioner for a long period of time:  
N
N
Check that the air filter is clean and remove any dust  
Set the fan going for three to four hours to dry the inside  
of the air conditioner thoroughly  
N
N
Turn the switch off after stopping the operation  
Cover the outdoor unit with a protective cover.  
E-17  
Solving Common Problems  
Before contacting the after-sales service, perform the follow ing  
simple checks. They may save you the time and expense  
of an unnecessary call.  
Problem  
Explanation / Solution  
The air conditioner  
N Check that the power switch is turned ON.  
does not operate at all  
N Check that the power light on the control panel  
is on; if necessary, press ON/OFF( ).  
N Check whether the timer operation function stops.  
The air conditioner does  
not operate with the  
remote control  
N Check that there are no obstacles between you  
and the indoor unit.  
N Check the remote control batteries.  
N Check that you are close enough to the indoor  
unit (7 meters / 23ft or less).  
The air conditioner  
does not cool  
N Check that the correct operating mode has been  
selected AUTO or COOL.  
N The room temperature may be too low.  
N Dust may be blocking the air filter guard;  
refer to page 17 for cleaning instructions.  
N Check that there is no obstacle in front of  
the outdoor unit.  
The fan speed does not  
change when you  
press the FAN SPEED  
button  
N
N
Check that the operating mode is set to  
COOL or FAN; in the AUTO mode,  
the fan speed changes automatically  
The air flow direction  
does not change when  
you press AIR SWING  
Check that the air conditioner has been  
switched on.  
The off timer is not  
correctly triggered  
N
N
Check that the off timer has been programmed  
correctly; see page 15.  
Smells are permeated  
in the room during air  
conditioning  
Air the room.  
E-18  
Technical Specification  
Indoor unit  
AP500PF  
Outdoor unit  
AX500PF  
MODEL  
ITEM  
Cooling Capacity  
Moisture Removal  
Indoor Air Flow (High)  
Sound rating  
BTU/h  
Pts/h  
CFM  
dBA  
ø/V/Hz  
W
49600  
11.83  
Performance  
Ratings  
1164.5  
56  
62  
Power Source  
3/208-230/60  
Power Consumption  
Operating Current  
Max. TD Fuse/Breaker  
5100  
16  
Electrical  
Data  
A
A
30  
Dimension  
&
45  
64  
25  
32  
39  
64  
15  
59  
17  
64  
Dimension  
W x H x D  
in  
27 x 75 x 23  
47 x 53 x 21  
64 64  
251130  
Weight  
Shipping Weight  
Liquid Line O.D  
Ibs  
in  
182  
3/8  
3/4  
Suction Line O.D  
Connections  
in  
Flare  
Refrigeration  
Lines  
1
5
Factory Pre-charge  
Max. Line Length  
Max. Height Difference  
ft  
ft  
ft  
49  
82  
49  
Standard rating conditions Cooling  
Indoor  
WB  
Outdoor  
DB  
DB  
35.0  
95  
WB  
23.9  
75  
26.7  
80  
19.4  
67  
°C  
°F  
E-19  
METHOD OF  
INSTALLATION  
Be sure to read the installation manual carefully to ensure  
sufficient realization of the excellent performance of the unit.  
Be sure to drill a hole in the wall necessary for installation  
before attempting to install the unit.  
After completion of installation, be sure to perform a test  
operation of the unit to check for any problem, and then  
deliver the unit to the customer if the test results are acceptable.  
After completion of test operation, hand over the owner’s manual,  
installation manual, and warranty card to the customer.  
As the installation work requires special skill, be sure to request a  
qualified dealer to take care of the installation of your unit; the user  
should not attempt to install his/her unit by himself/herself.  
Do not attach any electric heating device or  
electric heater to the unit.  
Do not attempt to disassemble or modify the unit by yourself.  
(It may cause machine trouble, electric shock or fire.)  
TABLE OF CONTENTS  
Absolute Checkpoints  
1. Drilling a hole in the wall  
ACCESSORY PARTS LIST  
. . . . . . . . . . . . . .  
• Connection Parts  
. . . . . . . . . . . . . . . . . . . . . .  
21  
21  
• Others  
SELECTION OF INSTALLATION PLACE  
. . . . . . . . . . . . . . . . . . .  
• Indoor Unit  
22  
22  
Ø70mm  
(3 inch)  
Less than  
150mm  
(6 inch)  
. . . . . . . . . . . . . . . . .  
• Outdoor Unit  
. . . . . . . . . . . .  
ELECTRICAL WORK  
23  
INSTALLATION METHOD  
• Installation Procedures  
• Connection of Refrigerant Piping 26  
2. Drain check  
. . . . . . . . .  
. .  
25  
. . . . . . . .  
. . . . . . . . . . . . . . . . . .  
• Drilling a Hole in the Wall  
• Drain Hose  
• Rat-prevention Cover  
27  
27  
27  
28  
28  
. . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . .  
• Indoor Unit  
• Outdoor Unit  
. . . . . . . . . . . . . . . . . . .  
. . . . . .  
AIR PURGE  
29  
30  
31  
Drain hose  
Indoor and  
outdoor connection  
REFRIGERANT CHARGING  
. . .  
CHECK AND TEST OPERATION  
Refer to page 27 for detailed procedures.  
E-20  
ACCESSORY PARTS LIST  
ACCESSORY PARTS LIST  
Connection Parts  
Others  
No.  
1
Part Name  
Q.ty  
1
Remarks  
No.  
Part Name  
Leg holder for indoor unit  
Q.ty  
4
Remarks  
1
Insulation for piping  
Connecting pipe  
Connecting pipe  
Screw  
2
3
4
5
6
7
8
9
2
4
4
TH M4X12  
1
1
1
1
2
1
1
8
ø9.52mm  
(3/8 inch)  
TH M4X25  
Option  
(Piping box)  
Indoor unit fixing holder  
3
1
4
4
5
3
3
1
1
ø19.05mm  
(3/4 inch)  
Connection wiring (3 strand)  
Drain hose  
Leg holder for outdoor unit  
Insulation rubber bottom  
Cable tie  
4
5
Piping box  
Finishing tape  
6
Insulation tape  
Putty  
7
Piping box  
Insulation tube for indoor  
unit piping connection  
Pipe band  
8
Ring terminal  
Rubber cabi slot  
Rubber cabi hole  
9
10  
E-21  
SELECTION OF INSTALLATION PLACE  
Indoor Unit  
N Install the unit at a place close to the wall facing the outside as  
it is necessary to perform piping connection with the outdoor unit.  
- It is effective to install the unit at a window side to ensure  
uniform distribution of indoor temperature.  
Top view  
N Install the unit at a place where there is no obstacle against the  
wind around the air inlet and air outlet.  
Above 50cm(20 inch)  
N Install the unit horizontally at a stable, rigid place.  
(When installing the unit at a place subjected to  
vibration, noise may occur.)  
N Avoid a place near the door which is frequented by people.  
Side view  
N Avoid a place subject to direct sunlight.  
Above 20cm(8 inch)  
Outdoor Unit  
N Place free from the risk of combustible gas leakage.  
N Place which can bear the weight of the unit.  
N Place which can bear the fixing strength of the outdoor unit.  
N Avoid a place subject to oil (including machine oil).  
N Avoid a saline place.  
N Avoid a place subject to sulfide gas (hot spring zone).  
(When installing the unit at such special environmental conditions,  
it may cause machine trouble. When it is unavoidable to use  
such places. It requires special maintenance.)  
Above 100cm(40 inch)  
N A place where the discharge air and noise of the outdoor unit  
do not disturb the neighborhood.  
(Take special care not to cause any inconvenience to your neighbors when installing the unit on the borderline  
with your neighborhood.)  
N A place where strong wind does not head against the air outlet of the outdoor unit.  
(If a strong wind heads directly against the air outlet at the time of cool operation,  
a safety device can be operated.)  
N Do not install the outdoor unit at an unstable place such as outer wall of an apartment or building.  
The outdoor unit may fall down, causing severe personal or property damage or loss.  
If there is any unavoidable reason to install the unit at such  
a place, take the following measures against the wind;  
1. When installing the unit at a roadside concentrated  
Strong wind  
with buildings, install it parallel with the road.  
Wall  
2. Install the unit so that the air outlet faces toward the wall at a  
place such as rooftop, which may be subjected to strong wind.  
Roof top  
N The outdoor unit should be installed in accordance with the service space.  
Above 50cm  
(20 inch)  
Above 15cm(6 inch)  
Above 50cm  
(20 inch)  
Space for piping  
and wiring  
Above 30cm(12 inch)  
Above 15cm(6 inch)  
Space for piping  
and wiring  
Above 15cm(6 inch)  
The air outlet faces toward the wall.  
The air inlet faces toward the wall.  
E-22  
SELECTION OF INSTALLATION PLACE / ELECTRICAL WORK  
ELECTRICAL WORK  
The electrical work should be performed by a specialist qualified for the work.  
N Use the three phase power supply, and be sure to install the sub power distributing board for  
exclusive use with the unit(separately purchased by the user).  
Avoid octopus-type wiring as it can cause a drop in voltage, thus resulting in poor performance  
of the automatic control circuit.  
N Be sure to install circuit breaker (separately purchased by the user).  
N Be sure to connect the grounding wire.  
Electric power spec  
3phase 3wires 208 ~ 230V / 60Hz  
Power  
50 A  
30 A  
Ampere of breaker  
Knife switch  
Switch  
Fuse  
30 A  
Size of grounding wire  
AWG 14  
Min. size of electric wires from/to  
the indoor/outdoor unit  
AWG 19  
AWG 19  
Size of electric input wires  
CAUTION  
N Be sure to use the wires, and switches or fuses of power distribution board are qualified  
and fulfill the specification.  
N Be sure to install knife switch or circuit breaker on the power distribution board.  
N The electrical and grounding work should be performed as per “ technical specification  
of electrical facilities ” and “ specification of internal wiring ”.  
N Be sure to connect main electrical input wires with bolted connectors using compressed terminal.  
E-23  
ELECTRICAL WORK  
When connecting 3Phase 3wires 208 ~ 230V AC  
1. Remove cover of electric box on side panel of outdoor unit.  
2. Connect electric input wires (R,S,T) to each terminal (R,S,T) of the electric box on outdoor unit respectively.  
(Input wires are purchased by the user separately.)  
3. Connect electric wires (red, white, black) to each terminal (red, white, black) on indoor and outdoor unit respectively.  
OUTDOOR SIDE  
Power terminals on the outdoor unit  
R S T  
Knife switch or  
automatic circuit  
breaker  
R
S
T
Red White  
Black  
Red  
White  
Black  
Indoor / outdoor unit  
connecting wire  
Electric input wires  
E-24  
ELECTRICAL WORK / INSTALLATION METHOD  
INSTALLATION METHOD  
Installation Procedures  
1. Open the inlet grille, and remove the flare nut.  
2. Bend the connection pipe to an appropriate length using the spring bender depending  
upon the installation place.  
- Allowable pipe length : Maximum 25m(82ft)  
- Allowable pipe drop distance : Maximum 15m(49ft)  
- Make no more than ten bending points on the pipe  
When the pipe length is in excess of the standard pipe length of 5m(16ft 5 in), add the refrigerant  
(R-22) of 50g(0.11lb) for each additional 1m(3.28ft).  
CAUTION  
N If the pipe is lengthened, the performance of the unit is degraded, and the service life is shortened.  
Therefore, the pipe length should be as short as possible (less then 15m/49ft).  
Outdoor  
unit  
Indoor  
unit  
Indoor  
unit  
Outdoor  
unit  
3. Install the high pressure pipe to the heat exchanger liquid pipe, and the low pressure pipe to the  
heat exchanger gas pipe respectively using the flare nut, taking care not to cause any leakage of refrigerant.  
4. Be sure to insulate the pipe with appropriate insulation material.  
5. Insert the drain hose into the drain pipe, and connect them by tying them to the cable tie to prevent  
any water leakage.  
6. After completion of the installation, check the connecting area for any gas leakage.  
7. Wind a finish tape when the wiring of the refrigerant pipe, the unit, and the drain piping are completed.  
Outdoor unit  
checking area  
Indoor unit  
checking area  
E-25  
INSTALLATION METHOD  
Connection of Refrigerant Piping  
Flare Processing  
1. Cut the pipe using the pipe cutter.  
Oblique  
Roughness  
Burr  
90  
2. Insert the flare nut into the pipe, and then perform the flare processing.  
D
A
Outer Diameter  
ø 9.52 mm(3/8")  
ø 19.05 mm(3/4")  
A
1.8 mm(7/100")  
1
5
2
mm(9/100")  
N Unproper flaring  
Inclined  
Surface  
damaged  
Cracked  
Uneven  
thickness  
Pipe Bending  
1. Perform bending of the pipe using the bender which has a specified bending radius.  
Spring  
2. Be sure to take full care to perform bending of the pipe successfully at one time.  
Bending and unbending the pipe more than twice makes  
the bending work increasingly difficult.  
3.You may use the spring inserted into the gas pipe instead  
of the bender to bend the pipe.  
4. When you bend the pipe using the spring, hold the pipe with both hands to prevent  
any distortion, and secure a minimum bending radius of more than 100mm(4 inch).  
Tightening of Connection Parts  
N Align the center of the connection piping, and tighten the flare nut by turning it with  
hand. Then tighten it again using the spanner in the direction as shown in the figure.  
Outer Diameter  
ø 9.52mm(3/8")  
ø 19.05mm(3/4")  
Tightening Torque  
Final Torque  
Remarks  
1
5
4
5
400 kg cm(28 ft•lb)  
450 kg cm(32 ft•lb)  
700 kg cm(50 3 ft•lb)  
750 kg cm(54 1 ft•lb)  
5
5
E-26  
INSTALLATIONMETHOD
Drilling a Hole in the Wall  
N Drill a hole of 70mm(3 inch) in diameter to the outside.  
N The drilling should be done at a distance of less than  
150mm(6 inch) from the floor facing the indoor unit.  
ø70mm  
Less than  
(3 inch)  
150mm  
(6 inch)  
Drain Hose  
N Extend the drain hose to the drain hose connected  
to the drain pan, and fix it with the tape or a cable tie  
to prevent separation. Then make a covering of it so  
that water can not flow outwardly.  
Piping Material Vinyl Chloride(Outer diameter ø 16mm/0.63 inch)  
Insulator Foamed Polyethylene  
Drain pan  
Insulation  
Band  
Indoor and  
Drain hose  
outdoor  
connection  
CAUTION  
1. As the draining is of natural drain type, make the drain hose direct downward.  
2. If there is any foreign substance in the drain plate, it may clog the drain pipe.  
Therefore, be sure to remove the foreign substance inside after installation.  
3. After completion of installation, be sure to pour water into the drain pan,  
and then check the draining condition.  
(There is no problem in draining when the draining is completed within 20 seconds.)  
Rat-prevention Cover  
N The piping of this unit can be connected to the left and rear side.  
N When you hit the area for piping connection slightly with a hammer, a hole is made.  
- If there is any reason to change connection, fill in hole with rubber cabi slot.  
Holes for piping  
connection (2 points)  
Rubber cabi slot  
E-27  
INSTALLATION METHOD  
Indoor Unit  
In order to install drain hose through wall, adjust height (max. 150mm/5.91 inch) of the indoor unit using leg  
holder.  
Fixing to the floor  
N When using the leg holder of the indoor unit.  
1. Lie down the unit on flat floor.  
Leg holder of  
the indoor unit  
2. Insert the leg holders into screwed holes  
and then fasten them clockwise.  
3. Turn the unit right and adjust horizontal line of it.  
Mis-alignment of the unit can cause vibration and noise.  
Fixing to the wall  
N When using fixing holder of the indoor unit.  
1. Fix the holder using long screw bolts on wall.  
2. Fix the unit using two screw bolts or four anchor bolts.  
Fixing holder of  
the indoor unit  
(Size of the screw hole on the holder is  
ø4.5mm/0.18 inch  
and size of the bolt is 6mm/0.24 inch).  
ø
Outdoor Unit  
When using the anchor bolt  
Anchor bolt fixing dimensions  
1. Fix the unit on a flat, rigid floor using the anchor bolt.  
(Anchor bolt : M10 x 4 points - separately purchased)  
A
Unit:mm(inch)  
840(33 inch)  
A
B
415(16.4 inch)  
B
When using the leg holder of the outdoor unit  
1. Insert the foot holder (4EA).  
2. Remove the nut fastened to the leg holder,  
and then insert the leg holder into the hole of  
the outdoor unit leg.  
3. Fix the unit securely with the nut.  
Nut  
Outdoor unit leg  
Leg holder  
Foot holder  
E-28  
INSTALLATION METHOD / AIR PURGE  
AIR PURGE  
N Be sure to perform the air purge of the indoor unit, and piping using the refrigerant of the outdoor unit at  
the time of installation.  
1. Connect the charging hose of low pressure side of  
manifold gauge to the packed valve having a service  
port (3/4" Packed valve) as shown at the figure.  
Outdoor unit  
Indoor unit  
Gas pipe side  
A
C
2. Open the valve of the low pressure side of manifold  
gauge counter-clockwise.  
Liquid pipe side  
B
D
3. Purge the air from the system using vacuum pump for  
about 10 minutes.  
- Close the valve of the low pressure side of manifold  
gauge clockwise.  
- Remove the hose of the low pressure side of manifold  
gauge.  
4. Set valve cork of both liquid side and gas side of  
packed valve to the open position.  
5. Mount the valve stem nuts to the 3-way valve.  
And mount the service port cap to 3-way valve.  
6. Check for gas leakage.  
- At this time, especially check for gas leakage from  
the 3-way valve’s stem nuts, and from the service  
port cap.  
Vacuum  
pump  
A
(gas)  
B
(liquid)  
Valve stem  
Stem cap  
E-29  
REFRIGERANT CHARGING  
Air purge(at the time of new installation only)  
Close the gas pipe side valve by turning it  
clockwise.  
Connect the pressure gauge to the low  
pressure side service valve, and then open  
the gas pipe side valve again.  
Connect it to the refrigerant filling tank.  
(Turn the tank upside down : Fill the refrigerant  
in liquid form.)  
Start cooling operation.  
Check the pressure of the pressure gauge.  
Check whether the low pressure side is within  
the range of 4.5~5.5kg/cm2G  
(outside temperature 35°C/95˚F).  
Open the tank and refill the refrigerant  
until arriving at the proper pressure.  
(Refill the refrigent slowly checking the pressure.)  
Stop operation.  
OUTDOOR UNIT  
Gas pipe side  
Close the gas pipe side valve, and loosen  
the pressure gauge connected.  
Then open the gas pipe side valve again.  
Liquid  
pipe side  
Tighten the cap of each valve using  
a specified tool.  
E-30  
REFRIGERANT CHARGING / CHECKANDTESTOPERATION
CHECK AND TEST OPERATION  
Check  
N Be sure to check the following again after completion of installation.  
1. Check the piping connection area for any gas leakage.  
Outdoor  
connection area  
Indoor  
connection area  
2. Is the drain hose properly connected?  
Drain hose  
Indoor and  
outdoor connection  
3. Is the insulation of the piping in good condition?  
Insulation  
4. Is grounding properly made?  
30cm(1145 inch)  
E-31  
CHECK AND TEST OPERATION  
Test Operation  
N After checking, read the owner’s instructions carefully, and perform a test operation.  
Then deliver the unit to the customer.  
(When delivering the unit, be sure to read carefully and follow the contents of the owner’s instructions.)  
CAUTION  
1. Be sure to check whether the service valve is opened before attempting to perform  
the test operation.  
2. Never attempt to start test operation by force pressing the electronic contactor as  
it is very dangerous.  
(This is very dangerous as the protective device does not work.)  
3. Be sure to perform the test operation after installation.  
It is easy to start the test operation in winter if you increase the sensor temperature to  
23°C(73.4˚F) ~ 25°C(77˚F) by holding the indoor temperature sensor. (Cooling operation)  
Temperature Sensor  
E-32  
CHECK AND TEST OPERATION  
MEMO  
E-33  
THIS AIR CONDITIONER IS MANUFACTURED BY:  
ELECTRONICS  
Printed in Korea  

Oreck Air User Manual
Philips Mcd716 User Manual
Powerdsine Lx2206 User Manual
Ricoh Aficio Mp 161l User Manual
Samsung Aw15ecb User Manual
Samsung Kh Eav User Manual
Samsung Scx 6320f User Manual
Schumacher Se 3002 User Manual
Smc Networks Robo Cylinder Rgs4d User Manual
Whynter Air Conditioner Arc 143mx User Manual