Samsung Afpcc052ca0 User Manual

OWNER’S INSTRUCTIONS  
MANUAL DE INSTRUCCIONES  
MANUEL D’UTILISATION  
Cooling only  
AFPCC052CA0  
System Air Conditioner  
Aire acondicionado sistemático  
Climatiseur numérique multifonctionnel  
E S F DB98-05497A(1)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Wireless Remote Controller-Buttons and Display . . . . . . . . . . . 6  
Wired Remote Controller-Buttons and Display . . . . . . . . . . . . . 7  
Centralized Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Getting Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Inserting the Wireless Remote Controller Batteries . . . . . . . . 10  
USING WIRELESS REMOTE CONTROLLER  
OPERATING YOUR AIR CONDITIONER  
Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . 12  
Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Heating Your Room (Except Cooling Only Models) . . . . . . . . 14  
Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Adjusting the Air Flow Direction . . . . . . . . . . . . . . . . . . . . . . . 17  
PROGRAMMING YOUR AIR CONDITIONER  
Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
USING WIRED REMOTE CONTROLLER  
OPERATING YOUR AIR CONDITIONER  
Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . 21  
Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Heating Your Room (Except Cooling Only Models) . . . . . . . . 23  
Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Adjusting the Air Flow Direction . . . . . . . . . . . . . . . . . . . . . . . 25  
PROGRAMMING YOUR AIR CONDITIONER  
Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
USING CENTRALIZED CONTROLLER  
Using the Centralized Controller . . . . . . . . . . . . . . . . . . . . . . . 28  
RECOMMENDATIONS FOR USE  
Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . 30  
Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . 31  
Bio-Pure Filter Installation (Optional) . . . . . . . . . . . . . . . . . . . . 32  
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
TECHNICAL SPECIFICATIONS  
E-3  
View of the Unit  
The figures are shown in this instruction may differ from yours depending on the model.  
Indoor Unit  
Air flow blades(outlet)  
Air inlet  
Air filter(under the grille)  
Timer indicator  
On/Off button  
On/Off indicator  
Remote control  
sensor  
Fan indicator  
Filter Sign  
indicator  
Removing frost  
indicator  
(Except Cooling  
Only Models)  
Outdoor Unit  
Outdoor Unit  
TYPE A  
Air outlet  
Connection valve  
(Inside)  
TYPE B  
Air outlet  
Connection valve  
E-4  
Outdoor Unit TYPE C  
Air outlet  
Connection valve  
Outdoor Unit TYPE D  
Air outlet  
Connection valve  
Air outlet  
Outdoor Unit TYPE E  
Outdoor Unit TYPE F  
Outdoor Unit TYPE G  
Connection valve  
Air outlet  
Connection valve  
Air outlet  
Connection valve  
If the heat exchanger in the outdoor unit gets dusty, cooling efficiency may fall. So clean the heat exchanger with water  
when it becomes dirty. However, be careful when you wash the surface of the heat exchanger because it is very sharp.  
Note  
E-5  
Wireless Remote Controller-Buttons and Display  
The wireless remote controller is an optional accessory.  
Mode selection button  
Operating mode  
Temperature adjustment  
buttons  
Temperature setting  
Filter Reset button  
Fan speed  
Fan speed adjustment  
button  
Air flow direction  
Swing button  
On Timer setting  
On Timer button  
Off Timer setting  
Off Timer button  
Battery discharge indicator  
On/Off & Timer  
Set/Cancel button  
Note  
- After cleaning the air filter, press the filter reset button.  
- The heating mode( ) is not selected in cooling only models.  
E-6  
Wired Remote Controller-Buttons and Display  
The wired remote controller is an optional accessory and it is installed on the wall.  
Operating mode  
Removing frost indicator  
Centralized controller indicator  
(In case of installing the Centralized controller)  
(Except Cooling Only Models)  
Communication error indicator  
Temperature setting  
Fan speed  
On Timer setting  
Off Timer setting  
Air flow direction  
Test indicator  
Filter Sign indicator  
On/Off & Timer  
Set/Cancel button  
Temperature adjustment  
buttons  
On/Off indicator  
On Timer button  
Fan speed adjustment  
button  
Off Timer button  
Swing button  
Test button  
Filter Reset button  
Mode selection button  
Note  
- Test button is for your installation specialist. You must NOT press it.  
- After cleaning the air filter, press the filter reset button. Then the wired remote  
controller will display the FILTER SIGN indicator when the time to clean the air filter;  
refer to page 31.  
- The heating mode( ) is not selected in cooling only models.  
E-7  
Centralized Controller  
The centralized controller is an optional accessory and it is installed on the wall.  
Operating lamp  
All On button  
All Off button  
On/Off indicators  
On/Off buttons  
Index  
Note  
Operating lamp comes on when at least one air conditioner connected to the  
centralized controller is operating.  
E-8  
Getting Start  
You have just purchased a system type air conditioner and it has been  
installed by your installation specialist.  
Your Owner’s Instructions contain much valuable information on using your  
air conditioner. Please take the time to read them as they will help you take full  
advantage of the unit’s features.  
The booklet is organized as follows.  
The following figures are shown on pages from 4 to 8 :  
-
-
-
-
Indoor and outdoor units  
Wireless remote controller (buttons and display)  
Wired remote controller (buttons and display)  
Centralized controller  
In the main part of the document, you will find a series of step-by-step proce-  
dures for each function available.  
The illustrations in the step-by-step procedures use three different symbols:  
PRESS  
PUSH  
HOLD DOWN  
E-9  
Inserting the Wireless Remote Controller Batteries  
You must insert or replace the remote controller batteries when :  
You purchase the air conditioner  
The remote controller does not work correctly  
Note  
Use two AAA, LR03 1.5V batteries.  
Do not use old batteries or different kinds of batteries together.  
Batteries may be completely discharged after 12 months, even  
if they have not actually been used.  
1
2
Push the battery cover on the rear of the remote controller with your  
thumb in the direction of the arrow and remove it.  
Insert the two batteries, taking care to respect the polarities :  
+ on the battery with + on the remote controller.  
- on the battery with - on the remote controller.  
3
Close the cover by sliding it back until it clicks into place.  
E-10  
Using  
Wireless  
Remote  
Controller  
This chapter indicates how to operate and program  
your air conditioner with the wireless remote controller.  
The wireless remote controller is an optional accessory.  
E-11  
Selecting the Automatic Operation Mode  
In the Automatic mode, the room temperature and the fan speed are  
controlled automatically.  
If necessary, press  
(ON/OFF) button.  
1
Result: The On/Off indicator on the indoor unit comes on.  
The air conditioner runs in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
To select the AUTO mode, press the Mode button until  
is displayed  
2
at the top of the wireless remote controller.  
Result: The indoor unit beeps.  
The air conditioner runs in AUTO mode.  
Note  
You can change modes at any time.  
3
To adjust the temperature, press the Temperature buttons one or more  
times until the required temperature is displayed. Possible temperatures are  
between 65OF and 86OF inclusive.  
Result:  
Each time you press Temperature buttons:  
- The temperature is adjusted by 1OF.  
The air conditioner starts cooling, provided that the room  
temperature is higher than the selected temperature.  
The quantity of air is adjusted automatically.  
E-12  
Cooling Your Room  
You must select the COOL mode if you wish to adjust the :  
Cooling temperature  
Fan speed when cooling  
If necessary, press  
(ON/OFF) button.  
1
Result: The On/Off indicator on the indoor unit comes on.  
The air conditioner runs in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
To select the COOL mode, press the Mode button until  
is displayed  
at the top of the wireless remote controller.  
Result: The indoor unit beeps.  
The air conditioner runs in COOL mode.  
You can change modes at any time.  
Note  
3
To adjust the temperature, press the Temperature buttons one or more  
times until the required temperature is displayed. Possible temperatures  
are between 65OF and 86OF inclusive.  
Result: Each time you press Temperature buttons:  
- The temperature is adjusted by 1OF.  
- The indoor unit beeps.  
The air conditioner starts cooling, provided that the room  
temperature is higher than the selected temperature ; the fan  
will, however, operate.  
4
5
Select the fan speed by pressing the Fan button one or more times until  
the intended value is displayed :  
Automatic(rotated :  
)
Low  
Medium  
High  
To control the direction of the air flow, refer to page 17.  
E-13  
(Except Cooling Only Models)  
Heating Your Room  
You can select the HEAT mode only in heat pump models.  
You must select the HEAT mode if you wish to adjust the :  
Heating temperature  
Fan speed when heating  
If necessary, press  
(ON/OFF) button.  
1
Result: The On/Off indicator on the indoor unit comes on.  
The air conditioner runs in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
To select the HEAT mode, press the Mode button until  
is displayed  
at the top of the wireless remote controller.  
Result: The indoor unit beeps.  
The air conditioner runs in HEAT mode.  
You can change modes at any time.  
Note  
3
To adjust the temperature, press the Temperature buttons one or more  
times until the required temperature is displayed. Possible temperatures  
are between 61OF and 86OF inclusive.  
Result: Each time you press Temperature buttons:  
- The temperature is adjusted by 1OF.  
- The indoor unit beeps.  
The air conditioner starts heating, provided that the room  
temperature is lower than the selected temperature ; the fan  
will, however, operate.  
4
5
Select the fan speed by pressing the Fan button one or more times until  
the intended value is displayed :  
Automatic(rotated :  
)
Low  
Medium  
High  
To control the direction of the air flow, refer to page 17.  
E-14  
Removing Excess Humidity  
If the atmosphere in your room is very humid or damp, you can  
remove excess humidity without lowering the room temperature too  
much.  
If necessary, press  
(ON/OFF) button.  
1
Result: The On/Off indicator on the indoor unit comes on.  
The air conditioner runs in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
To select the DRY mode, press the Mode button until  
is displayed  
at the top of the wireless remote controller.  
Result: The indoor unit beeps.  
The air conditioner runs in DRY mode.  
You can change modes at any time.  
Note  
3
To adjust the temperature, press the Temperature buttons one or more  
times until the required temperature is displayed. Possible temperatures  
are between 65OF and 86OF inclusive.  
Result: Each time you press Temperature buttons:  
- The temperature is adjusted by 1OF.  
- The indoor unit beeps.  
The air conditioner starts removing the excess humidity.  
The quantity of air is adjusted automatically.  
Note  
In the dry mode, the fan speed is controlled automatically.  
4
To control the direction of the air flow, refer to page 17.  
E-15  
Airing Your Room  
If the atmosphere in your room is stale, you can air it using the  
FAN feature.  
If necessary, press  
(ON/OFF) button.  
1
Result: The On/Off indicator on the indoor unit comes on.  
The air conditioner runs in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
2
3
To select the FAN mode, press the Mode button until  
the top of the wireless remote controller.  
is displayed at  
Result: The indoor unit beeps.  
Result: The air conditioner runs in FAN mode.  
You can change modes at any time.  
Note  
Select the fan speed by pressing the Fan button one or more times until  
the intended value is displayed:  
Low  
Medium  
High  
To control the direction of the air flow, refer to page 17.  
4
E-16  
Adjusting the Air Flow Direction  
Depending on the position of the indoor unit, you can adjust the position of  
the air flow blades, thus increasing the efficiency of the air conditioner.  
Press the Swing button.  
1
Result: The blades are moving between up and down.  
Result: The indoor unit beeps.  
IMPORTANT  
When the air conditioner is first turned on, the blades are moved.  
To stop the blades, press the Swing button again.  
2
To set to the required position, press the Swing button again when the  
blades are in the required position.  
E-17  
Setting the On Timer  
The On Timer enables you to switch on the air conditioner automatically  
after a given period of time. You can set the period of time from 30 minutes  
to 24 hours.  
To set the operating time, press the On Timer button one or more times  
until the required time is displayed. Possible time is between 0.5 hour and  
24 hour inclusive.  
1
Result: Each time you press On Timer button:  
- The time is adjusted by 0.5 hour to 5 hours, by 1 hour from  
6 hours to 24 hours.  
Press the  
Result:  
(Set/Cancel) button to complete the setting.  
The remaining time is displayed.  
2
Blinking of the timer indicator stops.  
The selected mode and the temperature disappear on the  
display after 5 seconds.  
The air conditioner will switch on automatically when the  
counter displayed on the remote controller reaches the  
setting time as disappearing the On timer setting.  
Note  
You can see or change the setting mode and/or the temperature  
by pressing the Mode button or the Temperature buttons after  
setting the On timer.  
To Cancel the On Timer  
To cancel the On Timer, press the On Timer button one or more times  
until the timer setting disappears.  
1
Press the  
(Set/Cancel) button.  
2
Note  
If you want to turn on the air conditioner before the timer reaches  
the setting time, press the  
(ON/OFF) button.  
E-18  
Setting the Off Timer  
The Off Timer enables you to switch off the air conditioner automatically  
after a given period of time. You can set the period of time from 30 minutes  
to 24 hours.  
To set the operating time, press the Off Timer button one or more times  
until the required time is displayed. Possible time is between 0.5 hour and  
24 hour inclusive.  
1
Result: Each time you press Off Timer button:  
- The time is adjusted by 0.5 hour to 5 hours, by 1 hour from  
6 hours to 24 hours.  
Press the  
(Set/Cancel) button to complete the setting.  
2
Result: The remaining time is displayed.  
Blinking of the timer indicator stops.  
The selected mode and the temperature disappear on the  
display after 5 seconds.  
The air conditioner will switch off automatically when the  
counter displayed on the remote controller reaches the  
setting time as disappearing the Off timer setting.  
Example If you would like to turn the air conditioner on after 2 hours  
and to operate it for 2 hours:  
1. Press the On Timer button until ‘2.0 Hr’ is displayed.  
2. Press the  
3. Press the Off Timer button until ‘4.0 Hr’ is displayed.  
4. Press the (Set/Cancel) button.  
(Set/Cancel) button.  
Note  
You can see or change the setting mode and/or the temperature  
by pressing the Mode button or the Temperature buttons after  
setting the Off timer.  
To Cancel the Off Timer  
To cancel the Off Timer, press the Off Timer button one or more times  
until the timer setting disappears.  
1
Press the  
(Set/Cancel) button.  
2
Note  
If you want to turn off the air conditioner before the timer reaches  
the setting time, press the  
(ON/OFF) button.  
E-19  
Using Wired  
Remote  
Controller  
This chapter indicates how to operate and program  
your air conditioner with the wired remote controller.  
The wired remote controller is an optional accessory.  
E-20  
Selecting the Automatic Operating Mode  
In the Automatic mode, the room temperature and the fan speed are  
controlled automatically.  
If necessary, press  
(ON/OFF) button.  
1
Result: : The On/Off indicator on the wired remote controller comes on.  
The air conditioner runs in the mode selected when  
the unit was last used.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
To select the AUTO mode, press the Mode button until  
is displayed  
2
at the top of the wired remote controller.  
Result: : The air conditioner runs in AUTO mode.  
Note  
You can change modes at any time.  
3
To adjust the temperature, press the Temperature buttons one or more times  
until the required temperature is displayed. Possible temperatures are  
between 65OF and 86OF inclusive.  
Result:  
Each time you press Temperature buttons:  
- The temperature is adjusted by 1OF.  
The air conditioner starts cooling, provided that the room  
temperature is higher than the selected temperature.  
The quantity of air is adjusted automatically.  
E-21  
Cooling Your Room  
You must select the COOL mode if you wish to adjust the :  
Cooling temperature  
Fan speed when cooling  
If necessary, press  
(ON/OFF) button.  
1
Result: The On/Off indicator on the wired remote controller comes on.  
The air conditioner runs in the mode selected when  
the unit was last used.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
To select the COOL mode, press the Mode button until  
the top of the wired remote controller.  
Result: The air conditioner runs in COOL mode.  
You can change modes at any time.  
is displayed at  
Note  
3
To adjust the temperature, press the Temperature buttons one or more times  
until the required temperature is displayed. Possible temperatures are between  
65OF and 86OF inclusive.  
Result:  
Each time you press Temperature buttons:  
- The temperature is adjusted by 1OF.  
The air conditioner starts cooling, provided that the room  
temperature is higher than the selected temperature ;  
the fan will, however, operate.  
4
Select the fan speed by pressing the Fan button one or more times until  
the intended value is displayed :  
Automatic(rotated :  
)
Low  
Medium  
High  
5
To control the direction of the air flow, refer to page 25.  
E-22  
(Except Cooling Only Models)  
Heating Your Room  
You can select the HEAT mode only in heat pump models.  
You must select the HEAT mode if you wish to adjust the :  
Heating temperature  
Fan speed when heating  
If necessary, press  
(ON/OFF) button.  
1
Result: The On/Off indicator on the wired remote controller comes on.  
The air conditioner runs in the mode selected when  
the unit was last used.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
To select the HEAT mode, press the Mode button until  
top of the wired remote controller.  
Result: The air conditioner runs in HEAT mode.  
You can change modes at any time.  
is displayed at the  
Note  
3
To adjust the temperature, press the Temperature buttons one or more times  
until the required temperature is displayed. Possible temperatures are between  
61OF and 86OF inclusive.  
Result:  
Each time you press Temperature buttons:  
- The temperature is adjusted by 1OF.  
The air conditioner starts heating, provided that the room  
temperature is lower than the selected temperature ;  
the fan will, however, operate.  
4
Select the fan speed by pressing the Fan button one or more times until  
the intended value is displayed :  
Automatic(rotated :  
)
Low  
Medium  
High  
5
To control the direction of the air flow, refer to page 25.  
E-23  
Removing Excess Humidity  
If the atmosphere in your room is very humid or damp, you can  
remove excess humidity without lowering the room temperature  
too much.  
If necessary, press  
(ON/OFF) button.  
1
Result: The On/Off indicator on the wired remote controller comes on.  
The air conditioner runs in the mode selected when  
the unit was last used.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
3
To select the DRY mode, press the Mode button until  
the top of the wired remote controller.  
Result: The air conditioner runs in DRY mode.  
is displayed at  
You can change modes at any time.  
Note  
To adjust the temperature, press the Temperature buttons one or more times  
until the required temperature is displayed. Possible temperatures are  
between 65OF and 86OF inclusive.  
Result:  
Each time you press Temperature buttons:  
- The temperature is adjusted by 1OF.  
The air conditioner starts removing the excess humidity.  
The quantity of air is adjusted automatically.  
Note  
In the dry mode, the fan speed is controlled automatically.  
4
To control the direction of the air flow, refer to page 25.  
E-24  
Airing Your Room  
If the atmosphere in your room is stale, you can air it using the  
FAN feature.  
If necessary, press  
(ON/OFF) button.  
1
Result: The On/Off indicator on the wired remote controller comes on.  
The air conditioner runs in the mode selected when the unit  
was last used.  
To select the FAN mode, press the Mode button until  
the top of the wired remote controller.  
is displayed at  
2
3
Result: The air conditioner runs in FAN mode.  
Select the fan speed by pressing the Fan button one or more times until  
the intended value is displayed:  
Low  
Medium  
High  
To control the direction of the air flow, refer to below.  
4
Adjusting the Air Flow Direction  
Depending on the position of the indoor unit, you can adjust the position of  
the air flow blades, thus increasing the efficiency of the air conditioner.  
Press the Swing button.  
1
Result: The blades are moving between up and down.  
IMPORTANT  
When the air conditioner is first turned on, the blades are  
moved.  
To stop the blades, press the Swing button again.  
2
To set to the required position, press the Swing button again  
when the blades are in the required position.  
E-25  
Setting the On Timer  
The On Timer enables you to switch on the air conditioner automatically  
after a given period of time. You can set the period of time  
from 30 minutes to 24 hours.  
To set the operating time, press the On Timer button one or more times  
until the required time is displayed. Possible time is between 0.5 hour and  
24 hours inclusive.  
1
Result: Each time you press On Timer button:  
- The time is adjusted by 0.5 hour to 5 hours, by 1 hour  
from 6 hours to 24 hours.  
Press the  
(Set/Cancel) button to complete the setting.  
2
Result: The remaining time is displayed.  
Blinking of the timer indicator stops.  
The selected mode and the temperature disappear on the  
display after 5 seconds.  
The air conditioner will switch on automatically when the  
counter displayed on the remote controller reaches the  
setting time as disappearing the On timer setting.  
Note  
You can see or change the setting mode and/or the temperature  
by pressing the Mode button or the Temperature buttons after  
setting the On timer.  
To Cancel the On Timer  
To cancel the On Timer, press the On Timer button one or more times  
until the On timer setting disappears.  
1
2
Press the  
(Set/Cancel) button.  
Note  
If you want to turn on the air conditioner before the timer reaches  
the setting time, press the (ON/OFF) button.  
E-26  
Setting the Off Timer  
The Off Timer enables you to switch off the air conditioner automatically  
after a given period of time. You can set the period of time  
from 30 minutes to 24 hours.  
To set the operating time, press the Off Timer button one or more times  
until the required time is displayed. Possible time is between 0.5 hour and  
24 hour inclusive.  
1
Result: Each time you press Off Timer button:  
- The time is adjusted by 0.5 hour to 5 hours, by 1 hour  
from 6 hours to 24 hours.  
Press the  
(Set/Cancel) button to complete the setting.  
2
Result: The remaining time is displayed.  
Blinking of the timer indicator stops.  
The selected mode and the temperature disappear on the  
display after 5 seconds.  
The air conditioner will switch off automatically when the  
counter displayed on the remote controller reaches the  
setting time as disappearing the Off timer setting.  
Example If you would like to turn the air conditioner on after 2 hours  
and to operate it for 2 hours:  
1. Press the On Timer button until ‘2.0 Hr’ is displayed.  
2. Press the  
3. Press the Off Timer button until ‘4.0 Hr’ is displayed.  
4. Press the (Set/Cancel) button.  
(Set/Cancel) button.  
Note  
You can see or change the setting mode and/or the temperature  
by pressing the Mode button or the Temperature buttons after  
setting the Off timer.  
To Cancel the Off Timer  
To cancel the Off Timer, press the Off Timer button one or more times  
until the timer setting disappears.  
1
2
Press the  
(Set/Cancel) button.  
Note  
If you want to turn off the air conditioner before the timer reaches  
the setting time, press the (ON/OFF) button.  
E-27  
Using the Centralized Controller  
The centralized controller is an optional accessory.  
Up to sixteen air conditioners can be turned on or off by connecting to the  
centralized controller. However, you cannot adjust the cooling temperature or  
set the timer with it. If you also have the wired remote controller,  
CENTRALIZED CONTROL is displayed at the top of the remote controller.  
To turn on the all of air conditioners connected to the centralized controller,  
press the (All ON) button.  
1
2
3
To turn on/off a specific air conditioner, press the  
(ON/OFF) button.  
Result: The On/Off indicator comes on when the air conditioner is  
operating.  
To turn off the all of air conditioners connected to the centralized controller,  
press the  
(All OFF) button.  
E-28  
Operating Recommendations  
Here are a few recommendations that you should follow when operating  
your air conditioner.  
Topic  
Recommendation  
Heating  
The heat pump function of the air conditioner absorbs heat  
performances from outside air and brings it indoors. As the temperature of the  
outside air drops, the heating performance of air conditioner will  
decrease. If you find that the room is not warm enough, using  
an additional heating appliance is recommended.  
Frost  
When outside temperature is low but humidity is high,  
frost may form on the outdoor unit at HEAT mode.  
If this happens:  
The heating operation stops.  
The defrost mode will be triggered automatically for about ten  
minutes.  
No intervention is required ; after about ten minutes, the air  
conditioner operates again normally.  
High indoor  
and outdoor  
If both indoor and outdoor temperatures are high and the air  
conditioner is running at HEAT mode, the outdoor unit’s fan  
temperatures and compressor may stop at times.  
This is normal ; simply wait until the air conditioner switches  
on again.  
Power failure  
If a power failure occurs while the air conditioner is operating,  
the unit will be switched off. When the power returns, the air  
conditioner starts up again automatically.  
E-29  
Temperature and Humidity Ranges  
The following table indicates the temperature and humidity ranges,  
within which the air conditioner can be used.  
If the air conditioner is used at...  
Then...  
High temperature  
The automatic protection feature may be  
triggered and the air conditioner stopped.  
Low temperature  
A water leakage or some other  
malfunction may happen if the heat  
exchanger freezes.  
High humidity levels  
Water may condense on and drip from  
the surface of the indoor unit if it is used  
for a long periods.  
Mode  
Heating  
Cooling  
Drying  
Outdoor Temperature  
- 4°F to 75°F approx.  
23°F to 109°F approx.  
23°F to 109°F approx.  
Indoor Temperature  
81°F or less  
Indoor Humidity  
-
70°F to 90°F approx.  
65°F to 90°F approx.  
80% or less  
-
◆◆ If the heating operation is used at below 32°F(outdoor temperature)  
then, it does not heat at its full capacity.  
If the cooling operation is used at over 91°F(indoor temperature) then,  
it does not cool at its full capacity.  
E-30  
Cleaning Your Air Conditioner  
To get the best possible use out of your air conditioner, you must clean  
it regularly to remove the dust that accumulates on the air filter.  
Before cleaning your air conditioner, ensure that you have  
switched off the electric circuit breaker used for the unit.  
IMPORTANT  
Open the front grille by pushing the tabs on the grille.  
1
You must give attention when disassembling the front grille  
and must check the safety clips have been installed.  
If you do not check them, the front grille will drop suddenly  
and you will be hurt.  
IMPORTANT  
Remove the front grille.  
2
2-1 Remove the safety clips.  
2-2 Open the front grille about 45° and pull it forward.  
Pull out the air filter.  
3
4
Remove all dust on air filter with a vacuum cleaner or a brush. In case of  
serious dust accumulation, put the air filter in warm detergent water and  
shake it vertically.  
Safety Clip  
Note  
When you have installed the Bio-Pure filter, do not allow any  
liquids to contact the filter. It may lose its properties.  
Dry the air filter.  
5
6
7
8
When you have finished, insert the filter into the front grille.  
Clean the unit with a vacuum cleaner or a brush once a month.  
Reinstall the front grille and the safety clips.  
Note  
You can use all 4 points of the indoor unit for installing the front  
grille and the safety clips depending on your requirement.  
Note  
After cleaning the air conditioner, press the Filter Reset button.  
Wired Remote Controller  
Wireless Remote Controller  
E-31  
Bio-Pure Filter Installation (Optional)  
The air conditioner can be fitted with a Bio-Pure filter to remove minute dust  
particles. The service life of the filter is approximately three months depending  
on the time during which the air conditioner is used.  
Remove the vinyl packing from the filter.  
1
Note  
Do not remove the packing from a bio-pure filter until you wish  
to use the filter, as it will lose its properties.  
Open the front grille by pulling the tabs on the grille.  
2
3
Remove the front grille.  
3-1 Remove the safety clips.  
3-2 Open the front grille about 45° and pull it forward.  
Pull out the air filter.  
4
Locate the bio-pure filter on the center of air filter.  
Secure the bio-pure filter with four screws.  
5
6
7
Reinstall the air filter, the front grille and the safety clips.  
E-32  
Solving Common Problems  
Before contacting the after-sales service, perform the following simple checks.  
They may save your time and expense of an unnecessary call.  
Problem  
Explanation/Solution  
The air conditioner does not Check that the breaker used for the air conditioner is switched on.  
operate at all  
Wired Remote Controller  
The air conditioner does not  
operate with the remote  
controller  
is displayed on the wired remote controller. In this case,  
turn the air conditioner off and contact your dealer.  
Wired Remote Controller  
When turning on/off the  
air conditioner, it is not  
In case of using the wired remote controller for a group, the air  
conditioners connected to the remote controller are turned on/off in  
order. Thus, it takes some time(up to 32 seconds).  
turned on/off immediately.  
Wireless Remote Controller  
The air conditioner does not Check that there are no obstacles between you and the remote  
operate with the remote  
controller  
control sensor.  
Check the wireless remote controller batteries (Refer to page 10).  
Check that you are close enough to the remote control sensor.  
(seven metres/yards or less).  
Wireless Remote Controller  
No beep is heard when you Check that you are pointing the remote controller at the remote  
press  
(ON/OFF) on the  
control sensor on the indoor unit.  
remote controller  
Replace the remote controller batteries if necessary.  
If there is a strong light around the air conditioner, a  
three-wavelength light, a neon sign, etc., for example,  
the air conditioner may not be operated with a remote controller.  
If this happens, use the remote controller close by the remote  
control sensor.  
The air conditioner does  
not cool or heat  
Check that the correct operating mode has been selected.  
The room temperature may be too low or too high.  
Dust may be blocking the air filter guard; refer to page 31  
for cleaning instructions.  
Check that there is no obstacle in front of the outdoor unit.  
When heating, the required Check that the required temperature has been set correctly.  
room temperature is never  
reached and the air  
Increase the fan speed.  
conditioner frequently stops  
E-33  
Technical Specifications  
Model  
Power Supply  
AFPCC052CA0  
1Ø, 208-230V~, 60Hz  
E-34  
Memo  
E-35  
THIS AIR CONDITIONER IS MANUFACTURED BY:  
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:  
CE CLIMATISEUR EST FABRIQUE PAR:  
ELECTRONICS  
Printed in Korea  

Lifebreath 1000rhc User Manual
Mitsubishi Electronics Peh 10mya User Manual
Precisionaire Flanders Pb100 0507 User Manual
Samsung Awt24f1mb User Manual
Tekkeon Healthy White Hx6732 User Manual
Toshiba Air Conditioner Rav Sp1400ut E User Manual
Toshiba Gd 1250 User Manual
Trendnet Automobile Parts Tu P1284 User Manual
Uniden Xca4500 User Manual
Xerox Workcentre M45 User Manual