Radio Shack Tad 797 User Manual

43-797.fm Page 1 Monday, August 16, 1999 9:20 AM  
Cat. No. 43-797  
OWNER’S MANUAL  
Please read before using this equipment.  
TAD -797  
Digital Answering System  
900MHz Cordless Speakerphone  
with Caller ID/Call Waiting ID  
43-797.fm Page 3 Monday, August 16, 1999 9:20 AM  
FEATURES  
Your RadioShack TAD-797 Digital An-  
swering System 900MHz Cordless  
Speakerphone combines a 900MHz  
cordless telephone with a 50-memory  
Caller ID unit and a digital TAD (Tele-  
phone Answering Device).  
Telephone Features  
900 MHz Operation — provides longer  
range and less interference than many  
other cordless phones.  
Spread Spectrum Technology  
The TAD-797’s telephone uses ad-  
vanced digital spread spectrum technol-  
ogy to give you superior audio quality  
and the utmost security. Its cordless op-  
eration lets you move freely around your  
home or office.  
spreads the signal across several fre-  
quencies, providing additional security  
for your phone conversations.  
Caller ID Memory — stores up to 50  
Caller ID records.  
The TAD-797’s Caller ID unit records  
each caller’s telephone number (and  
name, if available in your area) and the  
day and time of the call, as provided by  
your local phone company to Caller ID  
service subscribers. If you have Call  
Waiting with Caller ID, the TAD-797  
shows you the incoming caller informa-  
tion, even when you are already on the  
phone.  
Call Waiting ID — you can set the TAD-  
797 to display Caller ID information  
about an incoming call when you are on  
the phone (if you subscribe to this ser-  
vice from your local phone company).  
Easy-to-Read Liquid Crystal Display  
— lets you see who is trying to reach  
you before you answer the phone.  
Speakerphone — lets you talk without  
The TAD stores up to 15 minutes of  
messages on a computer chip and  
records each message’s day and time.  
This gives you advanced capabilities  
over tape-based answering machines:  
using the handset.  
Two-Way Intercom/Paging System —  
lets you send a signal from the base to  
the handset, or from the handset to the  
base, to page someone or locate the  
handset when it is away from the base. If  
someone answers, you can use the  
TAD-797 as an intercom.  
• You can delete individual messages  
and save the rest.  
• There are no tapes to bother with  
and no tape mechanisms to wear  
out.  
Volume Controls — let you adjust the  
volume you hear through the handset  
and speakerphone.  
The remote operation feature lets you  
operate your TAD from a touch-tone  
phone (or from a rotary phone with a  
pocket tone dialer).  
3
43-797.fm Page 4 Monday, August 16, 1999 9:20 AM  
Ample Talk and Standby Time — the  
supplied battery pack (when fully  
charged) provides about 31/2 hours of  
talk time or 7 days of standby time.  
TAD Features  
Ample Recording Time — you can  
record up to 15 minutes of messages.  
10 Number Memory Dialing — lets  
you store 10 numbers in memory for  
easy dialing.  
Day/Time Stamp — records the day  
and time each message was recorded.  
Remote Operation — lets you use a  
touch-tone phone (or rotary phone and  
pocket tone dialer) to operate the TAD  
while you are away from your home or  
office.  
Security Access-Protection Code —  
helps prevent other cordless phone us-  
ers from using your phone line while the  
handset is off the base.  
COM-LOK® — ensures that other cord-  
less phone users cannot use your phone  
line when the handset is on the base.  
Remote Answer-ON— lets you call the  
TAD from a remote location even when  
it is not set to answer calls.  
Auto Talk — lets you set the handset so  
you can answer a call by simply lifting  
the handset from the base or by press-  
ing any key when the handset is away  
from the base.  
Digital Volume Control — lets you pre-  
cisely adjust the speakerphone and  
message playback.  
Prerecorded Messages — give you the  
option one of using one of two prere-  
corded outgoing messages or recording  
your own.  
Redial — lets you quickly redial the last  
number dialed.  
Flash — sends an electronic switch-  
hook signal for use with special phone  
services, such as Call Waiting.  
Announcement Only — lets you play  
an announcement for callers to hear,  
without recording their messages.  
Tone/Pulse Dialing — lets you use ei-  
ther type of service, and you can easily  
switch from pulse to tone dialing for  
long-distance, bank-by-phone, or other  
special services.  
Message Counter — shows the num-  
ber of messages the TAD has recorded.  
Programmable PIN— you can set a  
two-digit personal identification number  
(PIN) for secure remote operation.  
Hearing-Aid Compatibility — lets you  
use your phone with hearing aids that  
have a T (telephone) switch.  
4
43-797.fm Page 5 Monday, August 16, 1999 9:20 AM  
Call Screening — lets you listen as a  
caller leaves a message so you can de-  
cide whether or not to answer the call.  
If you are using more than one phone or  
other device on the line, add up all the  
RENs. If the total is more than five, your  
phones might not ring. In rural areas, a  
total REN of three might impair ringer  
operation. If ringer operation is impaired,  
remove a device from the line.  
Memo Recording — lets you leave  
messages for yourself or others in your  
home or office. You can also record your  
phone conversation.  
Adjustable Ring Number — lets you  
set the TAD to answer after three or five  
rings.  
FCC STATEMENT  
Your TAD-797 complies with Part 68 of  
FCC Rules. You must, upon request,  
provide the FCC registration number  
and the REN to your phone company.  
These numbers are on the bottom of the  
base.  
Toll-Saver — lets you avoid unneces-  
sary charges when you call by long  
distance to check your messages.  
Phone Pick-Up Detection — stops re-  
cording when you pick up any phone on  
the same line as the TAD, and resets to  
answer the next call.  
You must not connect your phone to any  
of the following:  
• coin-operated systems  
• party-line systems  
READ THIS BEFORE  
INSTALLATION  
• most electronic key phone systems  
Note: Your telephone operates on stan-  
dard radio frequencies, as allocated by  
the FCC. Even though the security  
access-protection code prevents unau-  
thorized use of your phone line, it is pos-  
sible for other radio units operating on  
similar frequencies within a certain area  
to unintentionally intercept your conver-  
sations and/or cause interference. This  
lack of privacy can occur with any cord-  
less phone.  
We have designed your phone to con-  
form to federal regulations, and you can  
connect it to most telephone lines. How-  
ever, each device that you connect to  
the phone line draws power from the  
phone line. We refer to this power draw  
as the device’s ringer equivalence num-  
ber, or REN. The REN is on the bottom  
of the base.  
5
43-797.fm Page 6 Monday, August 16, 1999 9:20 AM  
CONTENTS  
Installation ............................................................................................................... 8  
Mounting the Phone ........................................................................................... 8  
On a Desk Top ............................................................................................. 8  
On a Wall Plate ............................................................................................ 9  
Directly on the Wall .................................................................................... 10  
Connecting and Charging the Battery Pack ..................................................... 12  
Setting the Dialing Mode .................................................................................. 13  
Turning the Base’s Ringer On and Off .............................................................. 14  
Setting the Handset’s Ringer Volume ............................................................... 14  
Setting the Number of Rings ............................................................................ 14  
Setting the Day/Time ........................................................................................ 14  
Setting Autotalk ................................................................................................ 15  
Turning Caller ID/Call Waiting On/Off ............................................................... 15  
Storing Your Area Code .................................................................................... 16  
Telephone Operation ............................................................................................ 17  
Making and Receiving Calls with the Handset ................................................. 17  
Adjusting the Handset Volume ......................................................................... 17  
Answering Calls with the Speakerphone .......................................................... 17  
Switching Between the Handset and Speakerphone ....................................... 18  
Using Both the Handset and Speakerphone .................................................... 18  
Using FLASH .................................................................................................... 18  
Using REDIAL .................................................................................................. 19  
Using Tone Services on a Pulse Line ............................................................... 19  
Using Page/Intercom ........................................................................................ 19  
Transferring a Call Between the Handset and Base .................................. 20  
Memory Dialing ................................................................................................. 20  
Storing a Number and Name in Memory ................................................... 21  
Editing or Deleting a Memory Number ....................................................... 22  
Entering a Pause ....................................................................................... 22  
Dialing a Memory Number ......................................................................... 23  
Chain-Dialing Service Numbers ................................................................. 23  
Testing Stored Emergency Numbers ......................................................... 23  
Using a Headset ............................................................................................... 23  
Caller ID Operation ............................................................................................... 25  
Reviewing Caller ID Records ............................................................................ 25  
Caller ID Messages .................................................................................... 26  
Dialing Numbers from a Caller ID Record ........................................................ 26  
Storing a Caller ID Record to Memory .............................................................. 27  
Deleting Caller ID Records ............................................................................... 27  
6
43-797.fm Page 7 Monday, August 16, 1999 9:20 AM  
TAD Operation ....................................................................................................... 28  
Selecting the Outgoing Message ..................................................................... 28  
Recording/Deleting an Outgoing Message ....................................................... 28  
Setting the Record Time ................................................................................... 29  
Setting the TAD to Answer Calls ...................................................................... 29  
Screening Calls ................................................................................................ 29  
Recording Incoming Messages ........................................................................ 29  
Recording a Memo ........................................................................................... 30  
Recording a Conversation ................................................................................ 30  
Playing Messages ............................................................................................ 30  
Adjusting the TAD’s Volume ............................................................................. 31  
Deleting Messages ........................................................................................... 31  
Setting the Remote Operation PIN ................................................................... 32  
Remote Operation ............................................................................................ 32  
Using Toll-Saver ............................................................................................... 32  
Using Remote Commands ............................................................................... 33  
Troubleshooting .................................................................................................... 34  
Care and Maintenance .......................................................................................... 36  
Replacing the Battery Pack .............................................................................. 37  
The FCC Wants You to Know ........................................................................... 38  
Lightning ........................................................................................................... 38  
7
43-797.fm Page 8 Monday, August 16, 1999 9:20 AM  
INSTALLATION  
• The USOC number of the jack to be  
installed is RJ11C (RJ11W for a wall  
plate).  
MOUNTING THE PHONE  
You can place the TAD-797’s base on a  
desk or table, mount it on a standard  
wall plate, or mount it directly on a wall.  
Choose a location that is:  
On a Desk Top  
• near an AC outlet  
1. Insert the bracket’s tabs into the  
base’s upper tab slots as shown,  
then press down on the bracket’s  
clips and insert them into the upper  
clip slots.  
• near a modular telephone line jack  
• out of the way of normal activities  
• away from electrical machinery,  
electrical appliances, metal walls or  
filing cabinets, wireless intercoms,  
alarms, and room monitors  
Upper  
Clip Slots  
Clips  
• away from other cordless phones  
The base’s location affects the phone’s  
range. If you have a choice of several lo-  
cations, try each to see which provides  
the best performance.  
Upper Tab Slots  
2. Route the supplied long modular  
cord through the strain relief slot on  
the side of the bracket, then plug the  
cord into the TEL LINE jack on the  
back of the base.  
Caution: You must use a Class 2  
power source that supplies 9  
!
volts DC and delivers at least 500 mA.  
Its center tip must be set to positive and  
its plug must fit the TAD-797's DC IN 9V  
jack. The supplied AC adapter meets  
these specifications. Using an adapter  
that does not meet these specifications  
could damage the TAD-797 or the  
adapter.  
Strain  
Relief  
Slot  
Notes:  
3. Plug the modular cord’s other end  
into a modular telephone line jack.  
• Your telephone connects directly to  
a modular telephone line jack. If  
your phone line jack is not a modu-  
lar jack, you can update the wiring  
yourself, using jacks and adapters  
available at your local RadioShack  
store. Or, you can let the phone  
company update the wiring for you.  
8
43-797.fm Page 9 Monday, August 16, 1999 9:20 AM  
4. Insert the supplied AC adapter’s  
barrel plug into the DC IN 9V jack on  
the back of the base.  
On a Wall Plate  
1. Insert the bracket’s tabs into the  
base’s lower tab slots as shown,  
then press down on the bracket’s  
clips and insert them into the lower  
clip slots.  
Lower  
Tab Slots  
Tabs  
5. Route the adapter’s cord through  
the strain relief slot on the bottom of  
the bracket.  
Strain  
Relief  
Slot  
Lower Clip Slots  
2. Plug one end of the supplied short  
modular cord into the TEL LINE jack  
on the back of the base.  
6. Plug the adapter into a standard AC  
outlet.  
7. Lift the base’s antenna to a vertical  
position.  
3. Insert the supplied AC adapter’s  
barrel plug into the DC IN 9V jack.  
9
43-797.fm Page 10 Monday, August 16, 1999 9:20 AM  
4. Route the adapter cord through the  
narrow groove on the bracket.  
7. Press and lift out the handset hold-  
er, flip it over as shown, then snap it  
back into place so it holds the hand-  
set.  
Narrow  
Groove  
8. Lift the base’s antenna to a vertical  
position.  
Directly on the Wall  
5. Plug the modular cord’s other end  
into the wall plate jack, then align  
the bracket’s keyhole slots with the  
wall plate studs and slide the base  
downward to secure it.  
For this mounting method, you need two  
screws (not supplied) with heads that fit  
into the keyhole slots on the bottom of  
the base.  
5/16"  
1. Drill two holes 315/16  
inches (100 mm)  
apart. Then thread a  
15/16"  
screw into each hole,  
letting the heads ex-  
tend about /16 inch (8  
3
5
mm) from the wall.  
2. Insert the bracket’s tabs into the  
base’s lower tab slots as shown,  
then press down on the bracket’s  
clips and insert them into the lower  
clip slots.  
6. Plug the adapter into a standard AC  
outlet.  
Lower  
Tab Slots  
Tabs  
Lower Clip Slots  
10  
43-797.fm Page 11 Monday, August 16, 1999 9:20 AM  
3. Plug one end of the supplied long  
modular cord into the TEL LINE jack  
on the back of the base.  
6. Align the bracket’s keyhole slots  
with the mounting screws and slide  
the base downward to secure it.  
4. Insert the supplied AC adapter’s  
barrel plug into the DC IN 9V jack.  
7. Plug the modular cord’s other end  
into a modular telephone line jack.  
8. Plug the adapter into a standard AC  
outlet.  
5. Route the modular and adapter’s  
cords through the grooves on the  
bracket as shown.  
Grooves  
9. Press and lift out the handset hold-  
er, flip it over as shown, then snap it  
back into place so it holds the hand-  
set.  
10. Lift the base’s antenna to a vertical  
position.  
11  
43-797.fm Page 12 Monday, August 16, 1999 9:20 AM  
To charge the battery pack, simply place  
the handset on the base, facing either  
up or down. The CHARGE indicator on  
the base lights and Total:00appears  
on the handset’s display.  
CONNECTING AND  
CHARGING THE BATTERY  
PACK  
The TAD-797 comes with a recharge-  
able nickel-cadmium battery pack in-  
stalled in the handset, but not  
connected. Before using your phone,  
you must connect the battery pack, then  
charge it for about 24 hours.  
Charge  
Indicator  
1. Press down and slide off the battery  
pack compartment cover.  
Recharge the battery pack when Low  
Battery  
sounds.  
appears  
and a beep  
2. Unfasten the plastic retainer strap  
and lift the battery pack out of the  
compartment. Plug the battery  
pack’s connector into the socket in  
the compartment. The connector fits  
only one way.  
Notes:  
• When you first use the phone after  
charging or recharging the battery  
pack, the phone might not work and  
you might hear a five-beep error sig-  
TALK  
nal when you press  
. If this  
happens, return the handset to the  
base for about 5 seconds. This re-  
sets the security access-protection  
code.  
3. Put the battery pack in the compart-  
ment and fasten the retainer strap.  
• If the CHARGE indicator does not  
light when you place the handset on  
the base, be sure the AC adapter is  
correctly and securely connected.  
4. Replace the cover.  
12  
43-797.fm Page 13 Monday, August 16, 1999 9:20 AM  
Also, check the charging contacts  
on the handset and base. If the con-  
tacts are dirty or tarnished, clean  
them with a pencil eraser.  
SETTING THE DIALING  
MODE  
Set  
on the back of the base  
DIAL MODE  
for the type of service you have. If you  
are not sure which type you have, after  
you charge the handset battery pack, do  
this simple test.  
1. Set  
to (tone).  
DIAL MODE  
T
• About once a month, fully discharge  
the battery by keeping the handset  
off the base until Low Battery  
appears. Otherwise, the battery  
pack loses its ability to fully re-  
charge.  
2. Press  
on the handset and lis-  
TALK  
ten for a dial tone.  
• If the battery pack becomes weak  
during a call, the handset beeps ev-  
ery few seconds and Low Bat-  
tery flashes on the display. If this  
happens, you must recharge the  
battery pack before you can make  
another call.  
3. Press any number other than .  
0
• If the battery pack is completely dis-  
charged or the base loses power  
while the handset is away from it,  
place the handset on the base to re-  
set the security access-protection  
code. If it was the handset that lost  
power, recharge the battery pack.  
If your phone system requires  
Note:  
that you dial an access code (9, for  
example) before you dial an outside  
number, do not press the access  
code number either.  
If the dial tone stops, you have  
touch-tone service. Leave  
set to .  
DIAL  
MODE  
T
• The supplied battery pack should  
last for about a year. When it loses  
its ability to fully recharge, order a  
replacement battery pack through  
your local RadioShack store (see  
“Replacing the Battery Pack” on  
Page 37).  
If the dial tone continues, you have  
pulse service. Set  
(pulse).  
to  
DIAL MODE  
P
4. Press  
or place the handset on  
TALK  
the base to hang up.  
13  
43-797.fm Page 14 Monday, August 16, 1999 9:20 AM  
TURNING THE BASE’S  
RINGER ON AND OFF  
SETTING THE NUMBER  
OF RINGS  
RINGER  
RING TIME  
on the side of the base to  
To turn off the base’s ringer, set  
OFF  
Set  
3 5  
T/S  
on the back of the base to  
. You can  
, , or  
to select how long the TAD  
still make or receive calls using this  
phone, and telephones on the same line  
and the TAD’s handset still ring when  
there is an incoming call.  
waits to answer a call (3 rings, 5 rings,  
or toll-saver).  
Note: If you plan to check messages by  
RING TIME  
long distance, set  
to toll-sav-  
er (see “Using Toll-Saver” on Page 32).  
RINGER  
To turn on the base’s ringer, set  
ON  
to  
.
SETTING THE DAY/TIME  
SETTING THE HANDSET’S  
RINGER VOLUME  
You must set the day of the week and  
time so the TAD can record the correct  
day and time of each message.  
At any time except during a call, press t  
or s to set the handset’s ringer volume.  
The phone rings at the selected volume  
and the display shows RingerLowor  
RingerHigh.  
Note: If you wait more than 15 seconds  
between each key press, the TAD exits  
the time setting process. Start again at  
Step 1.  
CLOCK  
1. Hold down  
until the TAD  
beeps. The TAD announces the cur-  
rently set day and displays the day’s  
number (0 for Sunday, 1 for Mon-  
day, and so on).  
14  
43-797.fm Page 15 Monday, August 16, 1999 9:20 AM  
2. To change the day of the week, re-  
peatedly press SKIP to move for-  
ward or REPEAT to move backward.  
Follow these steps to turn auto talk on or  
off.  
1. Lift the handset and press FUNC-  
TION. A menu appears with Auto  
Talkselected.  
3. Press CLOCK. The TAD announces  
the hour. To change the hour, re-  
peatedly press SKIP or REPEAT.  
2. Press SELECT to change the auto  
talk setting. Onor Offappears indi-  
cating the selected setting.  
4. Press CLOCK. The TAD announces  
the minutes. To change the minutes,  
repeatedly press SKIP or REPEAT.  
5. Press CLOCK. The TAD announces  
“AM” or “PM,” and A or P appears.  
Press SKIP or REPEAT to change  
this setting.  
6. Press CLOCK. The TAD announces  
the day and time.  
3. To clear the display, press FUNC-  
TION or return the handset to the  
base.  
SETTING AUTOTALK  
Your phone is preset so you must press  
TALK when you lift the handset from the  
base to answer a call. With auto talk  
turned on, you can answer a call by just  
lifting the handset from the base or by  
pressing any key when the handset is  
away from the base.  
TURNING CALLER ID/  
CALL WAITING ON/OFF  
If you have Call Waiting with Caller ID  
service, you can set the TAD-797 to  
show Caller ID information for an incom-  
ing call even if you are already on the  
phone.  
Follow these steps to turn the Caller ID/  
Call Waiting feature on or off.  
1. Lift the handset and press FUNC-  
TION.  
15  
43-797.fm Page 16 Monday, August 16, 1999 9:20 AM  
2. Press 2 or t to select CIDCW(Caller  
3. Press SELECT, then enter your 3-  
ID/Call Waiting).  
digit area code. If you make a mis-  
take, repeatedly press  
or  
to  
move the cursor over the incorrect  
digit, then enter the correct number.  
3. Press SELECT to change the Caller  
ID/Call Waiting setting. On or Off  
appears indicating the selected set-  
ting.  
If an area code is already  
Note:  
stored, it appears on the display. To  
delete the area code, press DELETE  
three times. Or, simply enter a new  
area code to overwrite the old one.  
4. Return the handset to the base to  
store the new setting.  
STORING YOUR AREA  
CODE  
To quickly dial a number from a Caller  
ID record (see “Dialing Numbers from a  
Caller ID Record” on Page 26) or to cor-  
rectly store a number from a record into  
a memory dialing location (see “Storing  
a Caller ID Record to Memory” on  
Page 27), you must store your local area  
code in the TAD-797’s memory. Then,  
when you dial from a Caller ID record,  
the TAD-797 skips the area code if it  
matches the one you stored.  
4. Press SELECT to store the area  
code.  
5. To clear the display when you finish,  
press FUNCTION or return the hand-  
set to the base.  
Follow these steps to store your area  
code.  
1. Lift the handset and press FUNC-  
TION.  
2. Press 3 (or t twice) to select Area  
Code.  
16  
43-797.fm Page 17 Monday, August 16, 1999 9:20 AM  
TELEPHONE OPERATION  
MAKING AND RECEIVING  
CALLS WITH THE  
HANDSET  
ADJUSTING THE  
HANDSET VOLUME  
To adjust the volume of the sound you  
hear through the handset, during a call,  
press t for normal volume or s for high  
volume. The display shows Volume  
Normalor VolumeHigh.  
To make a call, lift the handset, then  
press TALK. The IN USE indicator on  
the base lights. Dial the number. You  
see the number as you dial, then (about  
5 seconds later) the call’s elapsed time.  
When you hang up, the volume returns  
to the normal setting.  
Note: You can also dial the number be-  
fore you press TALK. If you make a mis-  
take, repeatedly press  
cursor is over the incorrect digit, then  
enter the correct number.  
or  
until the  
ANSWERING CALLS WITH  
THE SPEAKERPHONE  
To answer a call using the speaker-  
phone, press SPEAKER. The SPEAKER  
indicator lights.  
To answer a call, lift the handset from  
the base and press TALK. If auto talk is  
on, just lift the handset from the base,  
or, if the handset is away from the base,  
press any key to answer a call.  
To end a call, place the handset on the  
base or press TALK.  
17  
43-797.fm Page 18 Monday, August 16, 1999 9:20 AM  
To adjust the speakerphone’s volume,  
repeatedly press VOLUME s or t on the  
base. The volume setting from 1 (low-  
est) to 10(highest) appears in the mes-  
sage counter window.  
USING BOTH THE  
HANDSET AND  
SPEAKERPHONE  
If someone else is using the speaker-  
phone, press TALK on the handset to  
join the conversation. If someone else is  
using the handset, press SPEAKER on  
the base to join the conversation.  
During the call, one person can hang up  
and let the call continue at the other key-  
pad. Or, both people can hang up to end  
the call.  
To end a speakerphone call, press  
SPEAKER again.  
If you hear a high-pitched noise  
from the base’s speaker, the handset  
and the base are too close together.  
Note:  
SWITCHING BETWEEN  
THE HANDSET AND  
SPEAKERPHONE  
To switch to the speakerphone while  
you are using the handset, press  
SPEAKER on the base. When you hear  
the conversation or dial tone on the  
speakerphone, press TALK on the hand-  
set.  
USING FLASH  
FLASH performs the electronic equiva-  
lent of a switchhook operation for spe-  
cial services, such as Call Waiting.  
To switch to the handset while you are  
using the speakerphone, simply lift the  
handset off the base. If the handset is  
away from the base, press TALK, then  
press SPEAKER.  
For example, if you have Call Waiting,  
press FLASH to answer an incoming call  
without disconnecting the current call.  
Press FLASH again to return to the first  
call.  
If you do not have any special  
Note:  
phone services, pressing FLASH might  
disconnect the current call.  
18  
43-797.fm Page 19 Monday, August 16, 1999 9:20 AM  
3. When the service answers, press  
TONE  
USING REDIAL  
( ) on the handset. Any addi-  
tional numbers you dial are sent as  
tone signals.  
To quickly dial the last number dialed,  
TALK  
REDIAL  
.
press  
, then press  
4. When you hang up, the phone auto-  
matically resets to pulse dialing.  
Notes:  
REDIAL  
• You can also press  
on the  
TALK  
handset first, then press  
.
USING PAGE/INTERCOM  
• The redial memory holds up to 32  
digits, so you can redial long-  
distance as well as local numbers.  
You can use the TAD-797 as a two-way  
pager and intercom between the base and  
the handset. This is useful if the handset is  
away from the base and you want to lo-  
cate it, or if you want to have a conversa-  
tion between someone with the handset  
and someone at the base.  
• The redial memory also holds pause  
entries. See “Entering a Pause” on  
Page 22.  
FLASH  
• When you press  
and press  
any number key, the redial memory  
stores the number entered after  
To page the base from the handset, press  
FLASH  
, deleting any previous entry  
INTCM.  
Paging Base appears on the  
handset display, and both the base and  
SPEAKER INTER-  
(see “Using FLASH” on Page 18).  
handset ring. Press  
or  
on the base to answer the page. The  
handset display changes to Intercom.  
COM  
USING TONE SERVICES  
ON A PULSE LINE  
Some special services, such as bank-  
by-phone, require tone signals. If you  
have pulse service, you can still use  
these special tone services by following  
these steps.  
DIAL MODE  
P
1. Be sure  
is set to .  
2. Dial the service’s main number.  
19  
43-797.fm Page 20 Monday, August 16, 1999 9:20 AM  
To page the handset from the base,  
press INTERCOM. Both the handset and  
base ring, and Pagingappears on the  
handset’s display. Press TALK or INTCM  
on the handset to answer the page. The  
handset display changes to Intercom.  
pear. When the person at the base an-  
swers, press TALK. The call is released  
from hold and transferred to the base.  
To bring the handset back into the con-  
versation, press TALK again.  
To transfer a call from the base to the  
handset, press INTERCOM. The call is  
put on hold, and Holdand Pagingap-  
pear on the handset’s display. When the  
person with the handset answers, press  
SPEAKER. The call is released from hold  
and transferred to the handset. To bring  
the base back into the conversation,  
press SPEAKER again.  
To end the intercom call, press TALK on  
the handset, or SPEAKER on the base, or  
hang up the handset.  
MEMORY DIALING  
If a call comes in during an intercom  
conversation, either the person at the  
base or the person at the handset can  
answer the call. Press TALK on the  
handset or SPEAKER on the base once  
to end the intercom call, then press  
TALK or SPEAKER again to answer the  
incoming call.  
You can store up to 10 numbers and  
names in memory, then dial a stored  
number by pressing a memory location  
number. Each number can be up to 20  
digits, and each name can be up to 14  
characters.  
Use the supplied memory directory  
stickers to record your stored numbers.  
(Use a pencil in case you need to  
change the number later.) Peel the  
backing from each sticker and attach  
them to the phone as shown.  
The intercom does not operate if  
the party being paged is already on a  
call.  
Note:  
Transferring a Call Between the  
Handset and Base  
You can use the TAD-797’s intercom  
feature to transfer a call between the  
handset and the base.  
To transfer a call from the handset to the  
base, press INTCM. The call is put on  
hold, and Holdand PagingBaseap-  
20  
43-797.fm Page 21 Monday, August 16, 1999 9:20 AM  
If you do not want to enter a  
name, skip to Step 6. <Memory  
n> appears as the name (nis the  
memory location number you se-  
lected).  
Storing a Number and Name  
in Memory  
Note: An error tone sounds and the  
phone exits the storing process if you  
wait more than 20 seconds between  
each keypress.  
5. To enter a name, use t or s to se-  
lect the characters and  
move the cursor.  
or  
to  
1. Lift the handset.  
2. Hold down MEM until Memory  
Storeand a list of memory loca-  
tion numbers (and names, if any)  
appear.  
Repeatedly press t to see the  
characters in alphabetical order.  
(The display shows uppercase let-  
ters first, then lowercase letters,  
numbers, and special characters.)  
3. Choose a memory location (0–9)  
by pressing a number or by re-  
peatedly pressing s or t.  
Notes:  
• Press s to see the characters in  
reverse order.  
• You can hold down s or t to  
scroll rapidly through the char-  
acters.  
If you make a mistake, move the  
cursor over the error, then enter  
the correct character, or press DE-  
LETE to delete a character. To de-  
lete all the characters, hold down  
DELETE for at least 1 second.  
4. To store a name, press SELECT.  
StoreNameappears.  
6. Press SELECT. Store Number  
appears.  
21  
43-797.fm Page 22 Monday, August 16, 1999 9:20 AM  
7. Enter the phone number and any  
tone or pause entries (see “Using  
Tone Services on a Pulse Line” on  
Page 19 and “Entering a Pause” on  
Page 22).  
3. Choose a memory location (0–9) by  
pressing a number or by repeatedly  
pressing s or t.  
SELECT  
. The options listed  
4. Press  
below appear. Press s or t to choose  
an option, follow the instructions list-  
Instead of using the lower keypad  
keys, you can use t or s to enter the  
SELECT  
ed, then press  
.
number and other entries and  
or  
EditMemoryn— Edit the record  
as described in Steps 5 through 8 of  
“Storing a Number and Name in  
Memory” on Page 21.  
to move the cursor. Repeatedly  
press t to see the numbers first, then  
special characters, including hy-  
phens, pause entries (P), and tone  
entries ( ). Press s to see them in  
reverse order.  
DeleteMemoryn— The display  
prompts you to confirm the deletion.  
Move the cursor to Yesor No, then  
Note: When storing a number, press  
s once to enter a -or twice to enter  
SELECT  
DELETE  
. The  
press  
or  
phone beeps, and Memory n De-  
letedappears.  
a P (pause entry). Press  
before  
you enter the next number.  
GoBack— Returns you to the list  
of memory numbers.  
SELECT  
8. Press  
. The phone beeps  
and Memory n Stored appears.  
After 2 seconds, Memory Store  
appears, and you can repeat Steps  
3–8 to store more numbers.  
5. When you finish editing or deleting  
MEM  
memory numbers, press  
or re-  
turn the handset to the base to clear  
the MemoryStoredisplay.  
To replace a stored number, simply  
store a new one in its place.  
Entering a Pause  
In some telephone systems, you must  
dial an access code (9, for example) and  
wait for a second dial tone before you  
can dial an outside number. You can  
store the access code with the phone  
number. However, you should also store  
a pause after the access code to allow  
the outside line time to connect.  
Editing or Deleting a Memory  
Number  
Follow these steps to edit or delete a  
number stored in the handset’s memory.  
1. Lift the handset.  
MEM  
2. Hold down  
until Memory  
Store and a list of memory loca-  
tion numbers appear on the display.  
22  
43-797.fm Page 23 Monday, August 16, 1999 9:20 AM  
To store a 2-second pause, press  
PAUSE or press s twice to select P on  
the display. You can add more pause  
entries for a longer pause.  
Dial the service’s main number first.  
Then, at the appropriate place in the  
call, press MEM and the number for the  
location where the additional information  
is stored.  
Testing Stored Emergency  
Numbers  
If you store an emergency service’s  
number (police department, fire depart-  
ment, ambulance) and you choose to  
test the stored number, make the test  
call during the late evening or early  
morning hours to avoid peak demand  
periods. Also, remain on the line to ex-  
plain the reason for your call.  
Dialing a Memory Number  
To dial a memory number, lift the hand-  
set and press MEM. The list of memory  
location numbers appears. Choose a  
memory location (0–9) by pressing a  
number or by repeatedly pressing s or t,  
then press TALK.  
USING A HEADSET  
You can also press TALK first, then  
choose a memory number to dial, but  
the handset will not display the list of  
memory numbers.  
You can talk with hands-free conve-  
nience using an optional headset that  
3
has a /32-inch (2.5-mm) plug. Contact  
your local RadioShack store for a suit-  
able headset.  
If you select an empty memory lo-  
cation, the handset beeps 5 times.  
Note:  
To connect the headset, open the rub-  
ber cover marked  
handset, then insert the headset’s plug  
into the jack.  
on the side of the  
Chain-Dialing Service Numbers  
For quick recall of numbers for special  
services (such as bank by phone), store  
each group of numbers in its own mem-  
ory location.  
23  
43-797.fm Page 24 Monday, August 16, 1999 9:20 AM  
Notes:  
• Connecting a headset disconnects  
the handset’s earpiece and micro-  
phone.  
VOL  
s or t on the handset also con-  
trols the connected headset’s vol-  
ume.  
• If you place the handset on the base  
to recharge it while the headset is  
connected, be sure the handset  
seats properly.  
With a headset connected, you can  
make or answer calls as usual using the  
handset and answer calls as usual using  
the speakerphone.  
You can use a handset holder (available  
from your local RadioShack store) to  
hang the handset on your belt for great-  
er convenience.  
When you finish using the headset, dis-  
connect it from the handset and close  
the rubber cover to protect the jack.  
24  
43-797.fm Page 25 Monday, August 16, 1999 9:20 AM  
CALLER ID OPERATION  
If you subscribe to Caller ID service from  
your phone company, the phone compa-  
ny sends information about the call, as  
well as the time and date, between the  
first and second rings of every call you  
receive.  
REVIEWING CALLER ID  
RECORDS  
To review the Caller ID records, lift the  
handset and press CALL ID. The number  
of new Caller ID records, if any, and the  
total number of records appears.  
The TAD-797 displays this information  
when it receives a call, and it stores up  
to 50 Caller ID records for later review. It  
also shows if caller information is un-  
available or if the name and number  
were blocked by the caller (see “Caller  
ID Messages” on Page 26).  
Hint: If the handset is faceup on the base,  
it always shows the number of Caller ID  
records, so you can easily see if you have  
new records to review.  
If you subscribe to Call Waiting with  
Caller ID, you will hear a tone through  
the handset when a call comes in, then  
the Caller ID record appears. If you want  
to answer the incoming call, press  
FLASH. To resume the previous phone  
conversation, press FLASH again.  
Repeatedly press t to scroll through the  
Caller ID records from the newest to the  
oldest. Press s to scroll back through the  
records. To scroll quickly, hold down t or  
s.  
If the phone’s Caller ID memory be-  
comes full, any new call replaces the  
oldest call’s record.  
When you scroll past the oldest record,  
End appears. When you scroll past the  
newest record, the record totals appear.  
Number of Calls  
from this Caller  
Date and  
Time  
Caller’s  
Name  
Caller’s  
Number  
25  
43-797.fm Page 26 Monday, August 16, 1999 9:20 AM  
Caller ID Messages  
DIALING NUMBERS FROM  
A CALLER ID RECORD  
Display  
Description  
To dial a local number stored in a Caller  
ID record, recall the record, then press  
TALK. If it is a long distance call, press 1  
(1 appears before the displayed num-  
ber) before pressing TALK.  
Shows the number of  
new Caller ID  
records (records you  
have not reviewed)  
and the total number  
of records.  
New :XX  
Total:XX  
Private  
Name  
The caller has  
blocked the Caller ID  
information from  
being sent.  
Private  
Number  
Notes:  
Unknown  
Name  
The caller is not  
within a Caller ID ser-  
vice area.  
• If a Caller ID record does not con-  
tain a phone number (if it was  
blocked by the caller, for example)  
you cannot dial from that record.  
Unknown  
Number  
• You cannot dial from a Caller ID  
record if the number is longer than  
16 digits.  
Appears if there was  
an error during the  
transmission of  
Error  
Caller ID information.  
Appears when you  
scroll past the oldest  
Caller ID record.  
End  
26  
43-797.fm Page 27 Monday, August 16, 1999 9:20 AM  
STORING A CALLER ID  
RECORD TO MEMORY  
DELETING CALLER ID  
RECORDS  
Follow these steps to store the name  
and number from a Caller ID record  
into a memory location.  
You can delete Caller ID records indi-  
vidually or all at once.  
To delete a single record, recall it,  
1. Recall the record you want to  
DELETE  
then press  
. Delete Mes-  
MEM  
store, then press  
. Select  
sage? appears. Move the cursor to  
Locationappears.  
SELECT  
DE-  
or  
Yesor No, then press  
LETE  
.
2. Choose a memory location by  
0 9  
pressing its number ( – ) or  
scrolling through the list using t or  
To delete all the records at once,  
DELETE  
SELECT  
s, then press  
.
press  
while the total number  
of records is on the display. Delete  
All? appears. Move the cursor to  
SELECT  
DE-  
or  
Yesor No, then press  
LETE  
.
If the selected location is empty,  
the handset beeps to confirm that  
it stored the number, then the  
Caller ID record appears.  
If a record exists in the selected  
location, Replace Memory?  
appears, prompting you to confirm  
the replacement. Move the cursor  
SELECT  
to Yesor No, then press  
.
27  
43-797.fm Page 28 Monday, August 16, 1999 9:20 AM  
TAD OPERATION  
SELECTING THE  
OUTGOING MESSAGE  
RECORDING/DELETING  
AN OUTGOING MESSAGE  
The TAD has two prerecorded outgoing  
messages. One asks the caller to leave  
a message: “Hello, no one is available to  
take your call. Please leave a message  
after the tone.” The TAD uses this mes-  
sage when REC TIME is set to 1 or 4 (see  
“Setting the Record Time” on Page 29).  
To record your outgoing message (up to  
30 seconds long), hold down OGM until  
the TAD beeps and --appears. When  
you finish your message, press STOP.  
The TAD plays back your message.  
The other is simply an announcement  
and does not let the caller leave a mes-  
sage: “Hello, no one is available to take  
your call.” The TAD uses this message  
when REC TIME is set to ANN (an-  
nouncement only)  
Hint: Do not tell callers that you are not  
home. Instead, say that you cannot  
come to the phone right now.  
You can also record your own message  
(see “Recording/Deleting an Outgoing  
Message”). When you record your own  
outgoing message, the TAD uses it for  
all REC TIME settings.  
Note:  
The TAD-797 cannot record an  
outgoing message less than two sec-  
onds long.  
To switch between your outgoing mes-  
sage and the TAD’s prerecorded mes-  
sage, press OGM. When the current  
message begins to play, press OGM  
again. The TAD switches to the other  
message and plays it.  
To delete your outgoing message and  
use the TAD’s prerecorded messages,  
hold down OGM until the TAD beeps.  
Then press OGM again within two sec-  
onds.  
28  
43-797.fm Page 29 Monday, August 16, 1999 9:20 AM  
To set the TAD to not answer calls,  
ANSWER  
“Answer off” and the message counter  
turns off.  
SETTING THE RECORD  
TIME  
press  
. The TAD announces  
REC TIME  
1 4 ANN  
to , , or to deter-  
Set  
mine how the TAD-797 will record in-  
coming messages.  
SCREENING CALLS  
1
— The TAD plays the outgoing  
message and lets callers leave a  
message up to 1 minute long.  
You can let the TAD answer calls for you  
while you listen to the caller’s message  
through the base’s speaker. If you de-  
cide to answer the call, lift the handset  
4
— The TAD plays the outgoing  
message and lets callers leave a  
message up to 4 minutes long.  
TALK  
and press  
, or pick up any phone  
on the same line. The TAD stops record-  
ing and resets to answer the next call.  
ANN  
(announcement only) — The  
TAD plays the outgoing message  
but does not let callers leave a mes-  
sage.  
RECORDING INCOMING  
MESSAGES  
SETTING THE TAD TO  
ANSWER CALLS  
After the TAD answers a call, it plays the  
outgoing message, beeps, and records  
the caller’s message.  
To set the TAD to answer calls, press  
ANSWER  
. If the TAD is set to record a  
Each incoming message can be up to 1  
or 4 minutes long, depending on how  
caller’s message (see “Setting the  
Record Time”), it plays the outgoing  
message and shows the number of re-  
corded messages. If the TAD is set to  
announcement-only, it plays the outgo-  
ing message, and Aappears.  
REC TIME  
you set  
(see “Setting the  
Record Time”). The TAD-797’s maxi-  
mum recording capacity is 15 minutes or  
59 recorded messages.  
29  
43-797.fm Page 30 Monday, August 16, 1999 9:20 AM  
The TAD stops recording up and resets  
to answer the next call when:  
RECORDING A  
CONVERSATION  
• the caller hangs up  
The TAD-797 lets you record both sides  
of a telephone conversation.  
• the maximum message length is  
reached  
• the TAD detects a busy signal or  
more than 7 seconds of silence  
Note: It is illegal in some areas to record  
a conversation without the consent of all  
parties to the conversation, including the  
phone company. Check the laws in your  
area before you use the two-way record-  
ing feature.  
• you pick up the TAD-797’s handset  
or any phone on the same phone  
line  
Note: When the TAD’s message memo-  
ry is full, FLappears on the display.  
To start recording a phone conversation,  
MEM  
hold down  
on the base until the  
TAD beeps and –– appears. As it  
records the conversation, the TAD  
beeps every 15 seconds to let the caller  
know that the conversation is being re-  
RECORDING A MEMO  
A memo is a message you can record at  
the TAD for yourself or others in your  
home or office. The TAD-797 stores  
memos as incoming messages (see  
“Playing Messages”).  
STOP  
corded. To stop recording, press  
.
The TAD-797 stores a recorded conver-  
sation as a message (see “Playing Mes-  
sages” on Page 30).  
MEM  
To record a memo, hold down  
on  
Note: The TAD-797 cannot record a  
conversation less than two seconds  
long.  
the base until the TAD beeps and ––  
appears in the message counter win-  
dow, then speak your message (up to  
four minutes long). When you finish the  
STOP  
memo, press  
.
PLAYING MESSAGES  
After the TAD-797 has recorded a mes-  
sage, its message counter shows the to-  
tal number of messages stored. If you  
have new messages, the number flash-  
es.  
Note: The TAD-797 cannot record a  
memo less than two seconds long.  
30  
43-797.fm Page 31 Monday, August 16, 1999 9:20 AM  
To play your messages, press PLAY.  
The TAD announces the number of new  
and old messages, then plays the new  
messages. The message number ap-  
pears as each message plays, and the  
TAD announces the day and time of the  
call at the end of each message.  
ADJUSTING THE TAD’S  
VOLUME  
To adjust the speaker’s volume, repeat-  
edly press VOLUME s or t on the base.  
The volume setting from 1 (lowest) to  
10 (highest) appears in the message  
counter window.  
To play all messages after playing the  
new messages, press PLAY again.  
DELETING MESSAGES  
To skip to the next message, press SKIP  
during playback.  
To delete the current message while it is  
playing, hold down DELETE until the  
TAD beeps.  
To replay the current message from the  
beginning, press REPEAT. If you press  
REPEAT within 5 seconds after a mes-  
sage begins playing, the TAD replays  
the previous message.  
To delete all messages at once, while  
messages are not playing, hold down  
DELETE on the base until the TAD  
beeps and 0 appears in the message  
counter window.  
You cannot delete new (un-  
Note:  
played) messages. If you try to delete all  
messages at once while you still have  
new messages, the TAD sounds five  
quick beeps and does not delete any  
messages.  
31  
43-797.fm Page 32 Monday, August 16, 1999 9:20 AM  
SETTING THE REMOTE  
OPERATION PIN  
REMOTE OPERATION  
While you are away from your home or  
office, you can use a touch-tone phone,  
or a pulse (rotary) phone with a pocket  
tone dialer (available through your local  
RadioShack store) to enter your PIN and  
do any of the following:  
The TAD-797’s two-digit remote opera-  
tion PIN (personal identification number)  
prevents unauthorized remote access to  
your messages. The PIN is preset to 80.  
Follow these steps to change the PIN to  
any number from 00 to 99.  
• set the TAD to answer or not answer  
calls  
Note: If you wait more than 15 seconds  
between each keypress, the TAD exits  
the PIN setting process. Start again at  
Step 1.  
• listen to your messages  
• record a new outgoing message  
• record a memo  
PIN  
1. Hold down  
until the TAD beeps  
and 00 appears in the message  
counter window.  
• erase messages  
Note: You cannot remotely operate the  
TAD-797 using its handset or another  
telephone on the same line as the TAD.  
USING TOLL-SAVER  
RING TIME  
T/S  
(toll-saver, see  
If  
is set to  
SKIP  
2. Press  
to set the first digit of the  
REPEAT  
“Setting the Number of Rings” on  
Page 14), the TAD-797 answers after  
about three rings if you have new mes-  
sages (ones you have not listened to). If  
there are no new messages, the TAD  
answers after about five rings. This  
gives you time to hang up before the  
TAD answers so you can avoid unnec-  
essary long-distance charges.  
PIN higher or  
Then press  
to set it lower.  
PIN  
.
SKIP  
REPEAT  
to set the  
3. Press  
second digit of the PIN, then press  
PIN  
or  
. The TAD announces the new  
PIN.  
To check your PIN at any time, press  
PIN  
. The PIN appears in the message  
counter window, and the TAD announc-  
es it.  
Note: If the TAD loses power for longer  
than about one hour, the PIN resets to  
80.  
32  
43-797.fm Page 33 Monday, August 16, 1999 9:20 AM  
USING REMOTE  
COMMANDS  
Press  
# then:  
To:  
Follow these steps to operate the TAD  
from a remote location.  
1
Repeat current message  
during playback.  
Nots: If you wait more than 20 seconds  
between each keypress, the TAD  
sounds a long beep and hangs up.  
2
3
Play messages.  
Skip current message dur-  
ing playback.  
1. Dial your phone number and wait for  
the TAD to answer.  
4
5
Delete current message  
during playback.  
Note: Even if the TAD is not set to  
answer calls, it will answer after  
about 10 rings and sound a series of  
beeps.  
Stop playback, recording,  
and room monitoring.  
6
7
Set the TAD to answer calls.  
2. When the outgoing message begins  
(or the TAD sounds a series of  
Record a memo, or stop  
recording a memo.  
#
beeps), press , then enter your PIN  
8
9
Record or stop recording a  
new outgoing message.  
within 2 seconds.  
If the PIN is correct, the TAD an-  
nounces the day and time, then it  
announces the number of messag-  
es. The TAD beeps about once ev-  
ery two seconds to let you know it is  
ready to accept remote commands.  
Set the TAD to not answer  
calls.  
Monitor the room where the  
TAD is located for 15 sec-  
onds.  
#
3. To use a remote command, press  
and (within 2 seconds) the number  
for the command you want.  
33  
43-797.fm Page 34 Monday, August 16, 1999 9:20 AM  
TROUBLESHOOTING  
We do not expect you to have any problems with your TAD-797, but if you do, these  
suggestions might help.  
Problem  
Suggestion  
Low volume or unusual  
sounds.  
Someone has picked up another phone on the  
same line. Hang up the other phone.  
Severe noise interference.  
Keep the handset away from computers,  
remote control toys, wireless microphones,  
alarm systems, intercoms, room monitors, fluo-  
rescent lights, and electrical appliances.  
Move the handset to another location or turn off  
the source of interference.  
The phone cannot be operated Lift the base’s antenna to a vertical position.  
at a useful distance from the  
Be sure neither antenna is touching a metal  
base because the signal  
surface.  
becomes weak or noisy (hand-  
set’s range has decreased).  
Return the handset to the cradle, and recharge  
the battery pack. Replace the battery pack if  
necessary (see “Replacing the Battery Pack”  
on Page 37).  
The phone does not work or  
works poorly.  
Be sure the base’s phone line cord and AC  
adapter are correctly and securely connected,  
and the battery pack is charged.  
The handset battery pack does Check the charging contacts on the handset  
not charge.  
and base. If they are dirty, clean them with a  
pencil eraser.  
Be sure the battery pack is connected correctly.  
Replace the battery pack.  
The handset does not ring or  
receive a page.  
Move the handset closer to the base.  
Lift the base’s antenna to a vertical position.  
The battery pack might be weak. Charge the  
battery.  
Move the base away from other electrical  
devices and sources of noise.  
34  
43-797.fm Page 35 Monday, August 16, 1999 9:20 AM  
Problem  
Suggestion  
The handset stops working or  
works poorly during a call.  
Move the handset closer to the base.  
Lift the base’s antenna to a vertical position.  
Be sure the battery pack is charged. (If the bat-  
tery power is too low, it does not have enough  
power to light the display.)  
If the base loses power while the handset is  
away, the security access-protection code  
might change. Restore power to the base, then  
place the handset back on the base. The  
CHARGE indicator lights, indicating that the  
code is set again.  
Check the charging contacts on the handset  
and base. If they are dirty, clean them with a  
pencil eraser.  
The call is too noisy.  
Hang up and redial the number.  
Make sure the TAD is turned on.  
The TAD does not answer  
calls.  
Make sure the AC adapter and battery pack are  
properly connected.  
Check all phone line connections.  
The TAD does not record call- REC TIME is set to ANN (announcement only).  
ers’ messages.  
Set it to 1 or 4.  
Delete messages if memory is full.  
Be sure the battery pack is correctly connected.  
The handset’s display flashes  
slowly when it is on the base  
and/or the CHARGE indicator  
flashes every few seconds.  
Errorappears on the display Occasional errors are normal. If the phone fre-  
instead of a Caller ID record.  
quently displays Error, contact your local  
telephone company or RadioShack store for  
assistance  
If you still have problems, disconnect the phone. If other phones on the same line  
work properly, the fault is in this phone or its installation. If you cannot find the prob-  
lem, take your phone to your local RadioShack store for assistance.  
35  
43-797.fm Page 36 Monday, August 16, 1999 9:20 AM  
CARE AND MAINTENANCE  
Your TAD-797 Digital Answering System 900MHz Cordless Speakerphone is an ex-  
ample of superior design and craftsmanship. The following suggestions will help you  
care for your TAD-797 so you can enjoy it for years.  
Keep the TAD-797 dry. If it gets wet, wipe it dry immediately. Liquids  
might contain minerals that can corrode the electronic circuits.  
Use and store the TAD-797 only in normal temperature environments.  
Temperature extremes can shorten the life of electronic devices, dam-  
age battery packs, and distort or melt plastic parts.  
Keep the TAD-797 away from dust and dirt, which can cause premature  
wear of parts.  
Handle the TAD-797 gently and carefully. Dropping it can damage cir-  
cuit boards and cases and can cause the TAD-797 to work improperly.  
Use only a fresh battery pack of the required size and recommended  
type. Battery packs can leak chemicals that damage your TAD-797’s  
electronic parts.  
Wipe the TAD-797 with a damp cloth occasionally to keep it looking  
new. Do not use harsh chemicals, cleaning solvents, or strong deter-  
gents to clean the TAD-797.  
Modifying or tampering with the TAD-797’s internal components can cause a mal-  
function and might invalidate its warranty and void your FCC authorization to operate  
it. If your TAD-797 is not performing as it should, take it to your local RadioShack  
store for assistance. If the trouble is affecting the telephone lines, the phone company  
can ask you to disconnect your TAD-797 until you have resolved the problem.  
36  
43-797.fm Page 37 Monday, August 16, 1999 9:20 AM  
REPLACING THE  
BATTERY PACK  
If you follow the instructions in “Connect-  
ing and Charging the Battery Pack” on  
Page 12, the battery pack should last  
about one year. If the battery pack does  
not hold a charge for more than 2 hours  
after an overnight charge, replace it with  
a new 3.6-volt, 600 mAh battery pack  
with a connector that fits the socket in  
the battery compartment. You can order  
a replacement battery pack through your  
local RadioShack store.  
4. Replace the cover.  
If you have trouble replacing the battery  
pack, take the phone to your local Ra-  
dioShack store for assistance.  
Cautions:  
Install the new battery pack as de-  
scribed below, then charge it for about  
24 hours.  
You must use a replacement battery  
pack of the same size and type.  
• Do not dispose of the battery pack in  
a fire because it might explode.  
Note: To avoid losing memory numbers,  
install and begin charging the new bat-  
tery pack within 1 minute.  
• Do not open or mutilate the battery  
pack.  
1. Press down and slide off the battery  
pack compartment cover as shown.  
• Be careful not to short the battery  
pack by touching the connector’s  
pins with conducting materials, such  
as rings, bracelets, and keys. The  
battery pack or conductor might  
overheat and burn.  
Important: This product contains a re-  
2. Unfasten the plastic retainer strap  
and lift the battery pack out of the  
compartment, then gently pull on the  
battery connector to disconnect it.  
chargeable nickel-cadmium  
battery  
pack. At the end of the battery pack’s  
useful life, it must be recycled or dis-  
posed of properly. Contact your local,  
county, or state hazardous waste man-  
agement authorities for information on  
recycling or disposal programs in your  
area. Some options that might be avail-  
able are: municipal curb-side collection,  
drop-off boxes at retailers such as your  
local RadioShack store, recycling collec-  
tion centers, and mail-back programs.  
3. Insert the new battery pack’s con-  
nector into the socket in the com-  
partment, place the battery pack into  
the compartment, and refasten the  
retainer strap.  
37  
43-797.fm Page 38 Monday, August 16, 1999 9:20 AM  
If you cannot eliminate the interference,  
the FCC requires that you stop using  
your phone.  
THE FCC WANTS YOU TO  
KNOW  
In the unlikely event that your phone  
causes problems on the phone line, the  
phone company can temporarily discon-  
tinue your service. If this happens, the  
phone company attempts to notify you in  
advance. If advance notice is not practi-  
cal, the phone company notifies you as  
soon as possible and advises you of  
your right to file a complaint with the  
FCC.  
Some cordless telephones operate on  
frequencies that might cause interfer-  
ence to nearby TVs and VCRs. To mini-  
mize or prevent such interference, the  
base of the cordless telephone should  
not be placed near or on top of a TV or  
VCR.  
LIGHTNING  
Also, the phone company can make  
changes to its lines, equipment, opera-  
tions, or procedures that could affect the  
operation of this telephone. The tele-  
phone company notifies you of these  
changes in advance, so you can take  
the necessary steps to prevent interrup-  
tion of your telephone service.  
Your telephone has built-in lightning pro-  
tection to reduce the risk of damage  
from surges in telephone line and power  
line current. This lightning protection  
meets or exceeds FCC requirements.  
However, lightning striking the tele-  
phone or power lines can damage your  
telephone.  
Your phone might cause TV or radio in-  
terference even when it is operating  
properly. To determine whether your  
phone is causing the interference, turn  
off your phone. If the interference goes  
away, your phone is causing it. Try to  
eliminate the interference by:  
Lightning damage is not common. Nev-  
ertheless, if you live in an area that has  
severe electrical storms, we suggest  
that you unplug your phone during  
storms to reduce the possibility of dam-  
age.  
• moving your phone away from the  
receiver  
• connecting your phone to an AC  
outlet that is on a different electrical  
circuit from the receiver  
• contacting your local RadioShack  
store for help  
38  
43-797.fm Page 39 Monday, August 16, 1999 9:20 AM  
NOTES  
39  
43-797.fm Page 40 Monday, August 16, 1999 9:20 AM  
Limited One-Year Warranty  
This product is warranted by RadioShack against manufacturing defects in material and workman-  
ship under normal use for one (1) year from the date of purchase from RadioShack company-owned  
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-  
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING  
THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED  
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED  
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RE-  
SPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY  
LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-  
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, IN-  
CLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS  
OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-  
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of in-  
cidental or consequential damages, so the above limitations or exclusions may not apply to you.  
In the event of a product defect during the warranty period, take the product and the RadioShack  
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-  
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and  
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase  
price. All replaced parts and products, and products on which a refund is made, become the prop-  
erty of RadioShack. New or reconditioned parts and products may be used in the performance of  
warranty service. Repaired or replaced parts and products are warranted for the remainder of the  
original warranty period. You will be charged for repair or replacement of the product made after the  
expiration of the warranty period.  
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,  
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or  
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs  
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as  
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs  
of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state.  
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600, Fort Worth, TX 76102  
We Service What We Sell  
3/97  
RadioShack  
A Division of Tandy Corporation  
Fort Worth, Texas 76102  
UCZZ01609ZZ  
09A98  
Printed in the Philippines  

Lexmark Prospect Pro207 User Manual
Murphy Digital Time Meters Hd35 Dc User Manual
Nec Rih 2667 User Manual
Panasonic Kx Tg5240al User Manual
Samsung Aqt18wjwe User Manual
Samsung Ch36cax User Manual
Sanyo Ch4272r User Manual
Sharp Ar C250 User Manual
Trane Air Conditioner Gaf2a0a24s21sa User Manual
Xerox Docucolor 242 User Manual