Panasonic Panafax Uf 7000 User Manual

Facsimile  
Operating Instructions  
(For User Authentication)  
Model No.  
UF-7000/7100/8000/8100  
Before operating this machine, please read this manual completely and keep this manual for future reference.  
English  
Table of Contents  
General Description .......................................... 4  
User Authentication....................................................................................  
Job Tracking...............................................................................................  
RightFax Server .........................................................................................  
Using Machine (for User) .................................. 8  
Login Procedure (Using Copy/Fax/Scanner/Printer)..................................  
Sending a Document via RightFax............................................................. 10  
Setting Machine ................................................12  
Access Code Setting.................................................................................. 12  
Authentication Setting ................................................................................ 13  
Registration of Domain Name .................................................................... 16  
ID Timeout Setting...................................................................................... 17  
Auto Reset Time Setting ............................................................................ 18  
Lockout Setting........................................................................................... 19  
Authentication Method Setting ................................................................... 20  
Job Tracking Setting................................................................................... 21  
RightFax Server Setting ............................................................................. 23  
Appendix............................................................24  
Administrator Login .................................................................................... 24  
Administrator Name & Password ............................................................... 25  
Description of Job Tracking Notice............................................................. 26  
3
User Authentication  
The User Authentication works for the devices under the management of the Windows Server. As a result,  
users must be authenticated before they can use the functions of the machine (copying, faxing, scanning, and  
printing). The supported authentication protocol is NTLM v2.  
Windows Server  
- Windows 2000 Server  
- Windows Server 2003  
or  
- Windows NT Server 4.0 + Exchange Server 5.5 or later  
User name/password  
Authentication  
LAN  
Panasonic Device  
Users  
Users login to the Panasonic machine using their Windows account (user name and password).  
System administrator  
The system administrator can manage user accounts by using the Windows Server.  
User authentication can be set independently for each functions (copying, faxing, scanning, and printing).  
1. NTLM authentication is a user authentication protocol used in the Windows NT family of operating  
NOTE  
systems.  
NTLM uses a challenge/response method, and operates in such a way that the password is not  
sent across the network in clear text. In Windows 2000, this protocol can also be used to maintain  
compatibility between client and server.  
2. This feature is available if the optional Network Scanner/E-mail/Internet Fax module (UE-404090)  
is installed.  
4
 
Job Tracking  
When using User Authentication, it is also possible to use the Job Tracking function as well. The Job Tracking  
function allows the system administrator to receive a machine usage log and send/receive log via Email.  
The Email to the administrator includes the name of the machine user, destination, and communication time,  
together with the image of the document that was sent or received.  
Windows  
Server  
System  
Administrator  
Usage log and  
send/receive log  
Login data  
LAN  
PSTN  
Panasonic Device  
(See page 26)  
The following jobs are only tracked with this function.  
1. Fax Transmission and Reception via PSTN.  
2. Email Transmission to Internet Fax or PC.  
3. Reception from Internet Fax or PC.  
1. When the Job Tracking function is enabled, the following functions are not available.  
Manual Reception  
NOTE  
On-Hook Dialing  
Fax Forward (Fax Parameter No. 54)  
For details, refer to the Operating Instructions for Facsimile and Copy Functions.  
2. This feature is available if the optional Network Scanner/E-mail/Internet Fax module  
(UE-404090) is installed.  
5
 
RightFax Server  
By enabling Right Fax Server function, all the faxes will be sent via the Right Fax Server. All the fax logs can be  
easily be managed by a single server.  
When using with the User Authentication function, it will increase the security by controlling the usage and  
identifying the users.  
Windows Server Mail Server RightFax Server  
PSTN  
Send image data via PSTN  
POP receive  
content of fax  
LAN  
Authenticate  
Send image data with the Fax Number  
Check fax logs  
When using User Authentications  
Panasonic Device  
The fax document to be sent is passed to the RightFax server via Email.  
A user who sends a fax from a Panasonic machine can receive a send confirmation report on the PC from the  
RightFax server.  
1. When the RightFax function is enabled, the following functions are not available.  
NOTE  
Deferred Polling  
Sub-Address Transmission  
LAN Relay Transmission  
Polling  
Fax Cover Sheet  
Direct Transmission  
The document(s) is always stored into memory when sending the document(s).  
For details, refer to the Operating Instructions for Facsimile and Copy Functions.  
2. Requires RightFax Ver. 8.0 or later.  
3. This feature is available if the optional Network Scanner/E-mail/Internet Fax module (UE-404090)  
is installed.  
6
 
Memo  
7
Login Procedure (Using Copy/Fax/Scanner/Printer)  
Users must enter login name and the password before using the devices which User Authentication function is  
enabled. Authentication is performed using the user's Windows account.  
ENTER LOGIN NAME  
A login prompt appears if user authentication is enabled.  
Note:  
User authentication can be set independently for each functions (copying,  
faxing, scanning, and printing).  
MMM-DD-YYYY 16:30  
00%  
If user authentication is disabled for the fax function, the control panel displays  
the standby message and the login prompt only appears when a function that  
requires authentication is selected.  
Standby Message  
ENTER LOGIN NAME  
panasonic  
SET  
Enter your user name, and press  
. (Up to 40 characters)  
The user name is NOT case-sensitive.  
Ex: panasonic  
Note:  
Accepts following characters.  
, & ( ) : ! / _ . - + % = ' " $ ; < > ? [ ] ^ ` { | } * # and alphanumeric characters  
ENTER PASSWORD  
***a  
SET  
Enter your password, and press  
The password is case-sensitive.  
Ex: pana  
. (Up to 40 characters)  
Note:  
Accepts following characters.  
, \ & ( ) : ! / _ . - + % = ' " $ ; < > ? [ ] ^ ` { | } * # and alphanumeric characters  
SELECT DOMAIN  
PANA01  
SET  
Press  
or  
to select the domain, and then press  
.
Ex: PANA01  
8
   
MMM-DD-YYYY 16:30  
00%  
This completes authentication.  
After completing authentication, you can use the selected functions  
(copying, faxing, scanning, or printing).  
Note:  
One of the following messages appears if authentication fails.  
Message  
LOGIN FAILED  
Explanation  
The login failed.  
Check your user name and password.  
Check whether the Date and Time is set properly.  
LOGON ATTEMPTS EXCEEDED The system has been locked because the permitted number of login  
attempts has been exceeded. Please contact the system administrator.  
CONNECTION FAILED  
PROTOCOL ERROR  
SERVER NOT FOUND  
Unable to connect to the authentication server. Please contact the system  
administrator.  
Unable to connect to the authentication server. Please contact the system  
administrator.  
Unable to find the authentication server.  
Check whether the DNS Domain Name is set properly (see page 16).  
Check whether the Internet Parameters are set properly.  
IP Address  
Subnet Mask  
Default Gateway IP Address  
DNS Server Addresses  
Authentication is cancelled if no operation is performed on the machine within a certain time after authentication  
completes. In this case, you need to perform user authentication again before you can use the machine. The  
system administrator can specify the ID Timeout Period.  
See "ID Timeout Setting" on page 17 for details.  
The system administrator can specify whether authentication is required independently for each machine  
function (copying, faxing, scanning, and printing).  
See "Authentication Setting" on page 13 for details.  
9
Sending a Document via RightFax  
When the RightFax server is used to send a fax, the following details are entered in the recipient (TO) field and  
sender (FROM) field.  
Field  
Content  
Recipient Station Name registered for One-Touch or ABBR. dialing. If manual number dialing is used, you  
can enter the user name from the control panel.  
Sender  
<When the user authentication is not enabled>  
Logo and Email Address of this device.  
or  
Name and Email Address selected with Sender Selection function.  
<When the user authentication is enabled>  
Name of the authenticated user registered with Windows Server.  
ENTER STATION(S)  
THEN PRESS START 00%  
Login, and then set document(s) on the ADF.  
Note:  
If you need to login, see "Login Procedure" on page 8 for details.  
Specify the recipient.  
TEL. NO.  
5551234  
Ex: 5551234  
Note:  
Quick Name Search dialing, One- Touch/ABBR. dialing, and Directory Search  
dialing can be used to specify the recipient. For details, refer to the Operating  
Instructions for Facsimile and Copy Functions.  
*STORE*  
NO. 001  
01%  
Press  
to scan the document, and start sending.  
START  
PAGES=001  
If you press  
instead of  
when using manual number  
START  
SET  
ENTER NAME:  
dialing, you can enter the recipient's name. (Up to 15 characters)  
1 STN(S) ARE SET  
ADD MORE OR START  
SET  
Enter the name, and press  
.
When you press  
sending.  
, the machine scans the document and starts  
*STORE*  
NO. 001  
01%  
START  
PAGES=001  
10  
 
Memo  
11  
Access Code Setting  
Before you can setup the User Authentication, Job Tracking, or RightFax Server function, you first need to set  
the machine's access code.  
Note:  
To clear the access code, change the setting of the User Authentication (Fax Parameter No. 126, USER AUTH) and  
RightFax Server (Fax Parameter No. 132, VIA FAX SERVER) parameters to Invalid first.  
FAX PARAMETER(1-182)  
FUNCTION  
SET  
SET  
Press  
Press  
.
NO.=  
38 ACCESS CODE  
.
38 ACCESS CODE  
Enter a 4-digit number to set as the access code.  
1234  
Note:  
The access code set here is required in subsequent setup operations. Please  
keep it in a safe place.  
38 ACCESS CODE  
1:ALL  
SET  
Press  
Press  
.
1234  
1234  
38 ACCESS CODE  
2:PARAMETERS  
SET  
.
Note:  
When using the functions, you must always select  
setting up the access code function.  
(PARAMETERS) when  
MMM-DD-YYYY 16:30  
00%  
STOP  
Press  
to return to standby.  
12  
 
Authentication Setting  
The system administrator can enable/disable the user authentication for each function (copying, faxing,  
scanning, and printing).  
ENTER ACCESS CODE  
FUNCTION  
SET  
Press  
.
ENTER ACCESS CODE  
****  
SET  
Enter the access code (4-digit) set for the machine, and press  
.
FAX PARAMETER(1-182)  
NO.=  
SET  
Press  
, and then press  
.
126 USER AUTH  
1:COPY  
Select the function where authentication is required.  
: Selects the copy function.  
: Selects the fax function.  
SET  
SET  
SET  
SET  
: Selects the printer function.  
: Selects the scanner function.  
Note:  
The Sender Selection feature is not enabled if the fax function is set to require  
the authentication.  
For details, refer to the Operating Instructions for Internet Fax/Email and Network  
Scanner Functions.  
126 USER AUTH  
2:VALID  
Select "VALID" to use authentication or "INVALID" to disable authentication.  
: Disable authentication.  
: Enable authentication.  
SET  
SET  
When user authentication is enabled for the first time, you also need to  
specify the TIME ZONE, system administrator's name, and password.  
Continued on the next page...  
13  
   
Specify the TIME ZONE, the system administrator name, and password.  
TIME ZONE  
USE  
OR  
TO SCROLL  
Press  
or  
to select the time zone.  
TIME ZONE  
GMT-5 Eastern US&CN  
SET  
Press  
.
ADMINISTRATOR NAME  
ENTER NAME  
SET  
Enter the administrator name you wish to use, and press  
.
ADMIN. PASSWORD  
ENTER PASSWORD  
SET  
Enter the administrator password, and press  
.
Note:  
The administrator name and password set here is required in subsequent setup operations (see page 24). Please  
keep it in a safe place.  
14  
The next function appears (Return to step 4).  
SET  
SET  
To continue setting, press  
, select  
(INVALID) or  
(VALID) for each function, and press  
.
126 USER AUTH  
2:FAX  
SET  
Press  
.
126 USER AUTH  
1:INVALID  
SET  
Select  
(INVALID) or  
(VALID), and press  
.
.
.
126 USER AUTH  
3:PRINTER  
SET  
Press  
.
126 USER AUTH  
1:INVALID  
SET  
Select  
(INVALID) or  
(VALID), and press  
126 USER AUTH  
4:SCANNER  
SET  
Press  
.
126 USER AUTH  
1:INVALID  
SET  
Select  
(INVALID) or  
(VALID), and press  
127 ID TIMEOUT  
1:AUTO RESET TIME  
MMM-DD-YYYY 16:30  
00%  
STOP  
Press  
to return to standby.  
15  
Registration of Domain Name  
This sets the NT domain names and DNS suffix to use for user authentication.  
ENTER ACCESS CODE  
ENTER ACCESS CODE  
FUNCTION  
SET  
Press  
.
SET  
Enter the access code (4-digit) set for the machine, and press  
Press , and select "AUTH DOMAIN".  
.
****  
DATE & TIME  
09-01-2005 12:00  
AUTH DOMAIN  
PRESS SET TO SELECT  
SET  
Press  
.
ENTER DOMAIN NAME  
01  
A prompt appears for you to set the NT domain names.  
You can set up to 10 domain names. Press  
number ("01" to "10").  
or  
to select the entry  
ENTER DOMAIN NAME  
01 PANA01  
SET  
Enter the NT domain name, and then press  
. (Up to 15 characters)  
. (Up to 60 characters)  
ENTER DNS DOMAIN  
01 panasonic.com  
SET  
Enter the DNS domain name, and then press  
Note:  
If your Windows network is configured with Windows NT Server 4.0  
and Exchange Server 5.5, enter the Exchange Server Name (FQDN)  
or the IP Address on the Step 7.  
ENTER DOMAIN NAME  
02  
The next entry number appears (Return to step 5).  
Enter the next domain name if required.  
STOP  
Press  
to return to standby.  
Note:  
1. The User Authentication function becomes enabled after you perform  
"Access Code Setting", "Authentication Setting" and "Domain Name  
Registration", the control panel display changes from the standby message  
to the login prompt.  
2. Make sure that the Host Name has been set properly. For details, refer  
to the Operating Instructions for Internet Fax/Email and Network Scan  
Functions.  
16  
   
ID Timeout Setting  
If the ID Timeout Setting is set to "AUTO RESET TIME", authentication is cancelled if no operation is performed  
on the machine for a specified time period after performing authentication. The ID timeout period is set by the  
"AUTO RESET TIME Setting" on page 18.  
Note:  
When the User Authentication function is enabled, you must login to the machine to change settings. See the following  
sections for details about how to login.  
See "Administrator Login" on page 24 for Logging in as the system administrator.  
See "Login Procedure" on page 8 for Logging in as a user.  
ENTER ACCESS CODE  
FUNCTION  
SET  
Login to the machine, and press  
.
ENTER ACCESS CODE  
****  
SET  
Enter the access code (4-digit) set for the machine, and press  
.
FAX PARAMETER(1-182)  
NO.=  
SET  
Press  
, and then press  
.
127 ID TIMEOUT  
1:AUTO RESET TIME  
Select the ID Timeout setting.  
: (AUTO RESET TIME) An authenticated user will be logged  
out if no operation is performed on the machine for a  
specified time after performing authentication.  
: (AFTER EVERY JOB) An authenticated user will be logged  
out when the operation performed after authentication is  
completed.  
SET  
SET  
STOP  
Press  
to return to standby.  
17  
   
Auto Reset Time Setting  
This sets the ID timeout period when "AUTO RESET TIME" is selected for the ID Timeout Setting.  
Note:  
When the User Authentication function is enabled, you must login to the machine to change settings. See the following  
sections for details about how to login.  
See "Administrator Login" on page 24 for Logging in as the system administrator.  
See "Login Procedure" on page 8 for Logging in as a user.  
ENTER ACCESS CODE  
FUNCTION  
SET  
Login to the machine, and press  
.
ENTER ACCESS CODE  
****  
SET  
Enter the access code (4-digit) set for the machine, and press  
.
FAX PARAMETER(1-182)  
NO.=  
SET  
Press  
, and then press  
.
121 AUTO RESET TIME  
3:1 min  
Select the timeout for canceling authentication.  
: (OFF) Do not cancel authentication regardless of the  
SET  
elapsed time.  
: 30 seconds  
SET  
SET  
SET  
SET  
SET  
: 1 minute  
: 2 minutes  
: 3 minutes  
: 4 minutes  
STOP  
Press  
to return to standby.  
18  
   
Lockout Setting  
The system is locked if the permitted number of logon attempts is exceeded during the user authentication. This  
sets the number of permitted number of logon attempts and the lockout time (minutes).  
Note:  
When the User Authentication function is enabled, you must login to the machine before you can change settings. See the  
following sections for details about how to login.  
See "Administrator Login" on page 24 for Logging in as the system administrator.  
See "Login Procedure" on page 8 for Logging in as a user.  
ENTER ACCESS CODE  
FUNCTION  
SET  
Login to the machine, and press  
.
ENTER ACCESS CODE  
****  
SET  
SET  
Enter the access code (4-digit) set for the machine, and press  
.
.
FAX PARAMETER(1-182)  
NO.=  
SET  
Press  
, and then press  
.
128 LOGON ATTEMPTS  
0 times (0-9)  
Enter the number of logon attempts ( to ), and then press  
Unlimited login attempts is allowed if you set  
.
129 LOCKOUT TIME  
5 min. (1-60)  
SET  
Enter the lockout time ( to  
), and then press  
.
STOP  
Press  
to return to standby.  
19  
 
Authentication Method Setting  
This specifies which authentication method is to be used by the User Authentication function.  
Note:  
When the User Authentication function is enabled, you must login to the machine before you can change settings. See the  
following sections for details about how to login.  
See "Administrator Login" on page 24 for Logging in as the system administrator.  
See "Login Procedure" on page 8 for Logging in as a user.  
ENTER ACCESS CODE  
FUNCTION  
SET  
Login to the machine, and press  
.
ENTER ACCESS CODE  
****  
SET  
Enter the access code (4-digit) set for the machine, and press  
.
FAX PARAMETER(1-182)  
NO.=  
SET  
, and then press  
.
130 AUTH METHOD  
2:NTLM  
Select the authentication method.  
: Selects CLEAR TEXT.  
: Selects NTLM.  
SET  
SET  
STOP  
Press  
to return to standby.  
20  
 
Job Tracking Setting  
This enables or disables Job Tracking. If Job Tracking is enabled, also set the type of log to record and the  
Email address to which it is to be sent.  
Note:  
Before performing this setup, you first need to register the destination Email address for the log in One-Touch/ABBR.  
keys. Furthermore, change the setting of the Fax Forward (Fax Parameter No. 54, FAX FORWARD) parameter to  
Invalid.  
Set the POP Parameters so as to receive the emails automatically when using the Job Tracking function. Otherwise,  
your machine cannot receive any emails.  
Make sure that the Fax Parameters are NOT set as below.  
Auto POP Receive (Fax Parameter No. 147) : Invalid  
POP Timer (Fax Parameter No. 146)  
: 0 minute  
When the User Authentication function is enabled, you must login to the machine to change settings. See the following  
sections for details about how to login.  
See "Administrator Login" on page 24 for Logging in as the system administrator.  
See "Login Procedure" on page 8 for Logging in as a user.  
The Job Tacking Settings are cleared if the Authentication Setting of all functions is changed to Invalid.  
ENTER ACCESS CODE  
FUNCTION  
SET  
Login to the machine, and press  
.
ENTER ACCESS CODE  
****  
SET  
Enter the access code (4-digit) set for the machine, and press  
.
FAX PARAMETER(1-182)  
NO.=  
SET  
Press  
, and then  
.
131 JOB TRACKING  
1:INVALID  
Enable ("VALID") or disable ("INVALID") the Job Tracking function.  
: Disables Job Tracking.  
: Enables Job Tracking.  
SET  
SET  
If you selected  
(VALID), next specify the type of log to record and  
the Email address to which it is to be sent.  
JOB TRACKING=1  
1:TX 2:RX 3:TX&RX  
Select the type of log to record.  
: (TX) Record sending only.  
SET  
SET  
SET  
: (RX) Record receiving only.  
: (TX&RX) Record sending and receiving.  
JOB TRACKING  
ENTER ADMIN. ADDR  
A prompt appears for entering the destination Email address.  
Panasonic User  
Specify the Email address to which to send the log.  
Select the destination Email address to which to send the log from  
the addresses previously set in One-Touch/ABBR. keys.  
SET  
Press  
.
Continued on the next page...  
21  
   
RX LOCAL PRINT=1  
1:INC. 2:ON (ALWAYS)  
Select the way to printout the received document(s). This parameter is  
only enabled if the RX or TX&RX is selected on the step 5.  
: (INC) Printout only if the log was unable to be sent to the  
specified destination.  
SET  
SET  
: (ON) Always printout.  
STOP  
Press  
to return to standby.  
22  
RightFax Server Setting  
This enables or disables the RightFax server.  
Note:  
When the User Authentication function is enabled, you must login to the machine to change settings. See the following  
sections for details about how to login.  
See "Administrator Login" on page 24 for Logging in as the system administrator.  
See "Login Procedure" on page 8 for Logging in as a user.  
The machine will generate the Email Address in the format as below, and then send the Email to the RightFax Server.  
Ex: "Ifax=5551212/name=Jane/"<[email protected]>  
Fax Number Station Name Email Address of the RightFax Server  
ENTER ACCESS CODE  
FUNCTION  
SET  
Login to the machine, and press  
.
ENTER ACCESS CODE  
****  
SET  
Enter the access code (4-digit) set for the machine, and press  
.
FAX PARAMETER(1-182)  
NO.=  
SET  
Press  
, and then press  
.
132 VIA FAX SERVER  
1:INVALID  
Enable ("VALID") or disable ("INVALID") the RightFax server.  
: Disable the RightFax server.  
: Enable the RightFax server.  
SET  
SET  
When you enable the RightFax server for the first time, you also need to  
enter the Email address of the server.  
FAX SERVER MAIL ADDR  
A prompt appears for entering the Email address.  
FAX SERVER MAIL ADDR  
SET  
Enter the Email address of the RightFax server, and press  
(Up to 60 characters)  
.
STOP  
Press  
to return to standby.  
23  
 
Administrator Login  
This authenticates the system administrator who manages the Panasonic machine. After logging in to the  
machine, the system administrator can set up the authentication function.  
Note:  
Refer to Authentication Setting (see page 13) for the registration of Administrator's Name and Password.  
ENTER LOGIN NAME  
The login prompt appears if the user authentication function has been enabled.  
SET  
ENTER LOGIN NAME  
panasonic  
Enter the administrator name, and press  
.
The administrator name is NOT case-sensitive.  
SET  
ENTER PASSWORD  
***a  
Enter the password, and press  
The password is case-sensitive.  
.
SELECT DOMAIN  
LOCAL MACHINE  
SET  
Press  
or  
to select "LOCAL MACHINE", and then press  
.
MMM-DD-YYYY 16:30  
This completes authentication.  
00%  
24  
   
Administrator Name & Password  
The user name and password for the system administrator are set in "Authentication Setting" on page 13 when  
user authentication is enabled for the first time. Use the following procedure if you subsequently wish to change  
the system administrator name or password.  
Note:  
You must login to the machine before you can change settings. See the following sections for details about how to login.  
See "Administrator Login" on page 24 for Logging in as the system administrator.  
See "Login Procedure" on page 8 for Logging in as a user.  
ENTER ACCESS CODE  
FUNCTION  
SET  
Login to the machine, and press  
.
ENTER ACCESS CODE  
****  
SET  
Enter the access code (4-digit) set for the machine, and press  
Press , and select "ADMINISTRATOR NAME".  
The currently set administrator name is displayed.  
.
DATE & TIME  
09-01-2005 12:00  
ADMINISTRATOR NAME  
panasonic  
SET  
SET  
ADMINISTRATOR NAME  
panaadmin  
Enter the new administrator name, and press  
.
The name is NOT case-sensitive.  
ADMIN. PASSWORD  
*****  
Enter the administrator password, and press  
The password is case-sensitive.  
.
STOP  
Press  
to return to standby.  
25  
 
Description of Job Tracking Notice  
1
2
3
4
5
6
7
8
Fax Transmission via  
PSTN  
Job  
Type  
Reception via PSTN  
Reception from Internet Fax / PC  
Email Transmission to  
Internet Fax / PC  
Sender’s Name  
or  
FWD: Sender’s Email Address  
1.  
Fax: ID Number of the  
remote station  
Login Name in the User  
Authentication  
or  
Sender’s ID Unknown  
(In case of the remote  
station is not registered  
the ID number.  
2.  
3.  
Transmitted Date and  
Time  
Received Date and Time  
Sender’s Email Address, or  
Machine’s Email Address  
Recipient’s Email Address (as set in the Job Tracking Setting,  
see page 21)  
4.  
5.  
Fixed Title  
Received document(s)  
Received document(s)  
Transmitted document(s)  
* Email Body Text is included in  
the attached file as image.  
6.  
Fixed Message  
None  
None  
Number of Destination(s)  
Transmitted Address(es)  
7.  
8.  
26  
   
Memo  
27  
USA Only  
WARRANTY  
PANASONIC DIGITAL DOCUMENT COMPANY MAKES NO WARRANTIES, GUARANTEES OR  
REPRESENTATIONS, EXPRESSED OR IMPLIED, TO THE CUSTOMER WITH RESPECT TO  
THIS PANASONIC MACHINE, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
PANASONIC DIGITAL DOCUMENT COMPANY ASSUMES NO RISK AND SHALL NOT BE SUBJECT  
TO LIABILITY FOR ANY DAMAGE, INCLUDING, BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFITS SUSTAINED BY THE  
CUSTOMER IN CONNECTION WITH THE USE OR APPLICATION OF THIS PANASONIC MACHINE. SEE  
YOUR DEALER FOR DETAILS OF DEALER’S WARRANTY.  
For Service, Call:  
Panasonic Digital Document Company,  
Unit of Panasonic Corporation of North America  
Two Panasonic Way  
Secaucus, New Jersey 07094  
Panasonic Canada Inc.  
5770 Ambler Drive  
Mississauga, Ontario L4W 2T3  
For Customer Support (Except for  
USA and Canada Users):  
T0305-0  
Panasonic Communications Co., Ltd.  
Fukuoka, Japan  
PJQMC0489ZA  
March 2005  
Published in Japan  

Lexmark Prospect Pro205 User Manual
Master Lock B70cea User Manual
Ncomputing L230 User Manual
Netcomm 3100 User Manual
Panasonic Cw C172kr User Manual
Samsung 23 436 User Manual
Sanyo C3672r User Manual
Sharp Ar 287 User Manual
Sony Dc Vq800 User Manual
Sunbeam Major Appliances Odor Grabber User Manual