Motorola Mbp33 User Manual

USER’S GUIDE  
MBP33  
BABY MONITOR  
USER’S GUIDE  
The features described in user's guide are subject to  
modifications without prior notice.  
Overview of the Parent Unit  
14  
10 11  
12  
1
15  
2
3
4
6
7
8
9
19  
18  
20  
16  
17  
5
13  
1. Display (LCD screen)  
2. Vol + Key )  
10. Power Adapter / Battery LED  
BLUE when mains adapter  
power on.  
RED when battery low.  
11. Unit ON/OFF LED (Green)  
12. Audio Level LED (Green,  
Orange, Red, Red)  
Normal Mode: Vol Up  
Menu Mode: Up  
3. Vol - Key (  
Normal Mode: Vol Down  
Menu Mode: Down  
4. Brightness + Key ]  
13. Microphone  
Normal Mode: Brightness up  
Menu Mode: Right  
14. Power Key P  
Press and Hold to turn the unit  
ON/OFF  
5. Brightness - Key [  
Normal Mode: Brightness down 15. Antenna  
Menu Mode: Left  
Lift the antenna for optimal  
reception  
6. Menu Key M  
Press to open the Menu options 16. Battery cover  
7. OK Key O  
17. Stand  
18. Speaker  
19. USB connector  
Connection to AV output  
* AV Cable (Optional accessory,  
to be purchased separately)  
20. Power Adapter connector  
8. Video ON/OFF Key V  
Press to turn OFF the LCD  
display  
Press again to turn ON the  
LCD display  
9. Talk Key T  
Press and hold to speak to  
your baby  
Parent unit menu icons  
Signal Level (5 Levels)  
1
Night Vision Mode (Screen changes to Black/White)  
Talk Mode  
N
T
B
Battery Level Control (4 Levels)  
Parent unit menu icons (cont’d)  
Volume Level Control (8 Levels)  
*
Brightness Level Control (8 Levels)  
&
Lullaby Control (5 Song Selections)  
m
Zoom Level Control (1X, 2X)  
Z
Alarm Setting (6h, 4h, 2h, OFF)  
A
Cam Control (scan, view, add, del)  
C
Temperature Reading (HH ºC / ºF or LL ºC / ºF)  
Icon & readings turn RED > 29ºC / 84ºF, and reading display  
HH ºC / ºF > 36ºC /97 ºF)  
t
Icon & readings turn RED < 14ºC / 57ºF, and reading display  
LL ºC / ºF < 1ºC /34 ºF)  
Overview of Your Baby Unit  
9
1
11  
2
3
4
10  
8
5
7
6
1. Photo Sensor (Night Vision  
Mode)  
6. Speaker  
7. ON/OFF Switch  
8. Power Adapter Connector  
9. Antenna  
10. Temperature Sensor  
11. Pair Key  
2. Camera Lens  
3. Infared LEDs  
4. Power LED  
5. Microphone  
Important guidelines for installing your Baby Monitor  
To use your Video Monitor Baby and Parent Unit together, you must  
be able to establish a radio link between them, and the range will be  
affected by environmental conditions.  
Any large metal object, like a refrigerator, a mirror, a filing cabinet,  
metallic doors or reinforced concrete between the Baby and Parent  
Unit may block the radio signal.  
The signal strength may also be reduced by other solid structures, like  
walls, or by radio or electrical equipment, such as TVs, computers,  
cordless or mobile phones, fluorescent lights or dimmer switches.  
Use of other 2.4GHz products, such as wireless networks (WiFi  
routers), Bluetooth® systems, or microwave ovens, may cause  
interference with this product, so keep the baby monitor away at least  
5ft (1m) from these types of products, or turn them off if they appear to  
be causing interference.  
If the signal is weak, try moving the Parent and/or the Baby Unit to  
different positions in the rooms.  
Table of contents  
1. Safety Instructions.........................................................................6  
2. Getting Started ...............................................................................8  
2.1 Baby Unit Power Supply.................................................................8  
2.2 Parent Unit Battery Installation.......................................................8  
2.3 Parent Unit Power Supply ..............................................................9  
2.4 Registration (Pairing)....................................................................10  
2.5 View Video Through TV................................................................10  
3. Using the Baby Monitor MBP33..................................................11  
3.1 Setting up .....................................................................................11  
3.2 Manual Pan and Tilt......................................................................11  
3.3 Night Vision Mode ........................................................................11  
3.4 Talk Mode.....................................................................................11  
3.5 Video ON/OFF..............................................................................11  
3.6 Temperature Display (HH ºC / ºF or LL ºC / ºF)............................11  
4. MBP33 Parent Unit Menu Options ..............................................12  
4.1 Volume .........................................................................................12  
4.2 Brightness.....................................................................................12  
4.3 Lullaby ..........................................................................................12  
4.4 Zoom ............................................................................................12  
4.5 Alarm ............................................................................................13  
4.6 Camera Control ............................................................................13  
4.6.1  
4.6.2  
4.6.3  
4.6.4  
Add (pair) a camera .......................................................13  
View a camera ...............................................................13  
Delete a camera .............................................................14  
Scan camera ..................................................................14  
4.7 Temperature.................................................................................14  
5. Disposal of The Device (environment).......................................15  
6. Cleaning ........................................................................................16  
7. Help................................................................................................17  
8. General Information .....................................................................19  
Table of contents  
5
1. Safety Instructions  
WARNING:  
STRANGULATION HAZARD - Keep the adapter cord out of  
baby's reach.  
NEVER place camera or cords within the cot / crib.  
Secure the cord some distance away from baby's reach.  
Never use extension cords with AC Adapters. Only use the AC  
Adapters provided.  
CAMERA SET UP & USE:  
Determine a location for the CAMERA that will provide the best  
view of your baby in his cot / crib.  
Place the CAMERA on a flat surface, such as a dresser, bureau,  
or shelf.  
NEVER place camera or cords within cot / crib.  
Secure the cord to the wall to keep cord away from the baby's reach.  
WARNING  
This baby monitor is compliant with all relevant standards regarding  
electromagnetic fields and is, when handled as described in the User's  
Guide, safe to use. Therefore, always read the instructions in this User's  
Guide carefully before using the device.  
• Adult assembly is required. Keep small parts away from children when  
assembling.  
• This product is not a toy. Do not allow children to play with it.  
• This baby monitor is not a substitute for responsible adult supervision.  
• Keep this user's guide for future reference.  
• Do not place the baby unit or cables in the cot / crib or within reach of  
the baby (the unit should be at least 3 feet away).  
• Keep the cords out of reach of children.  
• Do not cover the baby monitor with a towel or blanket.  
6
Safety Instructions  
   
• Never use extension cords with power adapters. Only use the power  
adapters provided.  
Test this monitor and all its functions so that you are familiar with it  
prior to actual use.  
• Do not use the baby monitor near water.  
• Do not install the baby monitor near a heat source.  
• Only use the chargers and power adapters provided. Do not use other  
chargers or power adapters as this may damage the device and  
battery pack.  
• Only insert a battery pack of the same type.  
• Do not touch the plug contacts with sharp or metal objects.  
CAUTION  
Risk of explosion if battery is replaced by an incorrect type.  
Dispose of used batteries according to the instructions.  
Safety Instructions  
7
2. Getting Started  
2.1 Baby Unit Power Supply  
1. Connect the small plug of the power adapter to the baby unit and the  
other end to the electrical outlet.  
NOTE  
Only use the enclosed power adapter (5.9V DC / 1000mA).  
2. Slide the ON/OFF switch to the ON position. The power LED will  
light up in green.  
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.  
2.2 Parent Unit Battery Installation  
Black Red  
1. Insert the wire tab of the rechargeable battery pack into the contact  
slot as shown above and fit the battery pack into the compartment.  
Small cross head or  
Flat end screw driver  
2. Replace the battery cover over the compartment and gently tighten  
the screw in a clockwise direction using a Small cross head or Flat  
end screw drivers.  
8
Getting Started  
   
2.3 Parent Unit Power Supply  
IMPORTANT  
Installing the rechargeable battery pack and charging it fully before use is  
recommended. This will allow the unit to operate on battery in the event  
of a power failure.  
1. Connect the small plug of the power adapter to the parent unit and  
the other end to the electrical outlet. Only use the enclosed power  
adapter (6V DC/500mA).  
2. Press and hold the P POWER ON/OFF button for 1 second to  
turn ON the parent unit.  
3. Once the baby and parent units are switched on, the display on the  
parent unit will show the video captured by the baby unit.  
4. If there is no connection or you are out of range, the video display  
will go off and the words No Signal will be shown on the LCD display,  
and the unit will beep every 5 seconds. Move the parent unit closer  
to the baby unit until the link is re-established.  
5. Press and hold the P POWER ON/OFF button, until the progress  
bar finishes scrolling, to turn OFF the parent unit.  
NOTE  
The battery icon  
0
turns RED to indicate that the battery is low, and it  
gives a beep every 16 seconds. The battery needs to be recharged. The  
battery pack takes about 16 hours to charge fully.  
When charging  
1. During power OFF, when adapter is plugged in, a adapter logo will  
display on screen and then a flashing battery logo will display for 45 sec.  
The Blue LED at top left corner light up indicates adapter is plugged in.  
Getting Started  
9
2. During power ON, when adapter plug in, the battery icon on screen's  
top right corner will show that the battery is charging. The Blue LED  
at the top left corner light up indicates adapter is plugged in.  
2.4 Registration (Pairing)  
The Baby monitor is pre-registered to your Parent Unit. You do not need  
to register it again unless the Baby Unit loses its link with the Parent Unit.  
To re-register your Baby Unit, or register a new Baby Unit, follow the  
procedure below:  
1. Press the M button of the parent unit and the menu bar will pop up.  
2. Press the < LEFT button or > RIGHT button until C is highlighted,  
and the del/add/view/scan menu will pop up.  
3. Press the + UP button or - DOWN button to select ADD, and press  
the OK button to confirm.  
4. CAM 1  
/
CAM 2  
/
CAM 3  
/
CAM 4 will pop up, press the + UP button or -  
DOWN button to select the desired CAM and press the OK button to  
start searching for a camera unit. The green audio level LED will  
flash rapidly while searching.  
5. Press the OK button to confirm.  
6. Press and hold the PAIR button underneath the baby unit until the  
parent unit finds the camera, beeps and the video from the camera  
appears.  
NOTE  
If a particular Baby Unit was registered previously, registering this current  
Baby Unit again will overwrite the old registration.  
2.5 View Video Through TV  
Connect a suitable AV cable into the AV OUT socket on the side of the  
Parent Unit and into the AV input of the TV. Scroll through the AV inputs  
on the TV menu until the Baby monitor picture is visible.  
AV cable is an optional accessory, which is to be purchased separately.  
NOTE  
The Monitor's power button must be turned ON and CAM pre-selected  
before connecting the AV cable. Once the AV cable is connected, the  
Monitor's controls cannot be activated.  
10  
Getting Started  
   
3. Using the Baby Monitor MBP33  
3.1 Setting up  
• Place the baby unit in a convenient location (e.g. on a table) and point  
the camera lens towards the area you want to monitor.  
• Adjust the baby unit's head angle by rotating the camera up, down, left  
and right until you are satisfied with the image in the parent unit.  
NOTE  
Do not place the baby unit within baby's reach! If there is interference with  
the picture or sound, try moving the units to different locations, and  
ensure they are not close to other electrical equipment.  
3.2 Manual Pan and Tilt  
You can rotate the cam sphere up/down/left/right by hand to desire angle.  
3.3 Night Vision Mode  
The baby unit has 8 high-intensity infrared LEDs for picking up clear images  
in the dark. When the built-in photo sensor detects a low level of ambient  
light, the LEDs will automatically activate and the screen on the parent unit  
will display in black and white. The N icon will be displayed on the screen.  
3.4 Talk Mode  
Press and hold the T TALK button on the parent unit to talk to your baby  
through the baby unit's loudspeaker. The T icon will be displayed at the  
top of the LCD screen.  
3.5 Video ON/OFF  
Press V VIDEO ON/OFF key to turn the LCD display on or off, but will  
still leave the audio monitor on.  
3.6 Temperature Display (HH ºC / ºF or LL ºC / ºF)  
The temperature reading from the temperature sensor at the back of  
the Baby Unit will be displayed at the top of the LCD screen. The  
readings will turn RED if the temperature goes above 29ºC / 84ºF or  
below 14ºC / 57ºF. The reading will change to HH ºC / ºF if the  
temperature goes above 36ºC / 97ºF. The reading will change to LL ºC /  
ºF if the temperature goes below 1ºC / 34ºF.  
Using the Baby Monitor MBP33  
11  
           
4. MBP33 Parent Unit Menu Options  
4.1 Volume  
Press the ) VOL UP button or (VOL DOWN button to select the desired  
volume level from level 1 ~ 8. (The default volume level setting is level 4.)  
4.2 Brightness  
Press the ] BRIGHTNESS UP button or [ BRIGHTNESS DOWN  
button to select the desired brightness level from level 1 ~ 8. (The default  
brightness level setting is level 4.)  
4.3 Lullaby  
1. Press the M button and the menu bar will pop up.  
2. Press the < LEFT button or > button until m is highlighted.  
3. Press the + UP button or - DOWN button to select the desired song  
from the 5 lullabies available, or the cycle option to play all 5 songs in  
turn. If an individual song is selected it will only play once and then stop.  
(The default setting is lullaby OFF)  
4. Press OK on the selected lullabies to select the desired song sound  
level.  
4.4 Zoom  
1. Press the M button and the menu bar will pop up.  
2. Press the < LEFT button or > button until Z is highlighted.  
3. Press the + UP button or - DOWN button to select the 1X or 2X  
Zoom. (The default setting is 1X.)  
12  
MBP33 Parent Unit Menu Options  
         
4.5 Alarm  
1. Press the M button and the menu bar will pop up.  
2. Press the < LEFT button or > RIGHT button until A is highlighted.  
3. Press the + UP button or - DOWN button to select the alarm time  
(6h, 4h, 2h). (The default setting is Alarm OFF.)  
If an alarm time is selected, the parent unit will beep for about 45  
seconds after every 6, 4 or 2 hour period, and the alarm icon will  
flash red.  
4.6 Camera Control  
4.6.1 Add (pair) a camera  
1. Press the M button and the menu bar will pop up.  
2. Press the < LEFT button or > RIGHT button until C is highlighted,  
and the del/add/view/scan menu will pop up.  
3. Press the + UP button or - DOWN button to select ADD, and press  
the OK button to confirm.  
4. CAM 1  
/
CAM 2  
/
CAM 3 CAM 4 will pop up, press the + UP button or -  
/
DOWN button to select the desired CAM, and press the OK button  
to start searching for a camera unit. The green audio level LED will  
flash rapidly while searching.  
5. Press and hold the PAIR button underneath the baby unit until the  
parent unit finds the camera, beeps and the picture from the camera  
appears.  
NOTE  
A camera can only be registered to one parent unit at any one time.  
4.6.2 View a camera  
1. Press the M button and the menu bar will pop up.  
2. Press the < LEFT button or > RIGHT button until C is highlighted  
and the del/add/view/scan menu pops up.  
3. Press the + UP button or - DOWN button to select VIEW, and press  
the OK button to confirm.  
4. CAM 1  
/
CAM 2  
/
CAM 3 CAM 4 will pop up, press the + UP button or -  
/
DOWN button to select desired CAM, and press the OK button to  
view the picture from that camera.  
MBP33 Parent Unit Menu Options  
13  
       
TIP  
Quick Method to View Cameras instead of entering into the menu bar.  
Directly press OK repeatedly to select CAM 1 CAM 2, CAM 3, CAM 4, SCAN.  
,
4.6.3 Delete a camera  
1. Press the M button and the menu bar will pop up.  
2. Press the < LEFT button or > RIGHT button until C is highlighted,  
and the del/add/view/scan menu will pop up.  
3. Press the + UP button or - DOWN button to select DEL, and press  
the OK button to confirm.  
4. CAM 1  
/
CAM 2  
/
CAM 3  
/
CAM 4 will pop up, press the + UP button or -  
DOWN button to select the desired CAM, and press the OK button  
to delete that registration.  
4.6.4 Scan camera  
1. Press the M button and the menu bar will pop up.  
2. Press the < LEFT button or > RIGHT button until C is highlighted,  
and the del/add/view/scan menu will pop up.  
3. Press the + UP button or - DOWN button to select SCAN, and press  
the OK button to confirm.  
4. The screen will then display images from different registered  
cameras in a loop of CAM 1  
/
CAM 2  
/
CAM 3  
/
CAM 4, changing about  
every 12 seconds.  
TIP  
Quick Method to View Cameras instead of entering into the menu bar.  
Directly press OK repeatedly to select CAM 1 CAM 2, CAM 3, CAM 4, SCAN.  
,
4.7 Temperature  
1. Press the M button and the menu bar will pop up.  
2. Press the < LEFT button or > RIGHT button until t is highlighted.  
3. Press the + UP button or - DOWN button to select ºC or ºF.  
14  
MBP33 Parent Unit Menu Options  
     
5. Disposal of The Device  
(environment)  
At the end of the product lifecycle, you should not dispose  
of this product with normal household waste. Take this  
product to a collection point for the recycling of electrical  
and electronic equipment. The symbol on the product,  
user's guide and/or box indicates this.  
Some of the product materials can be reused if you take  
them to a recycling point. By reusing some parts or raw materials from  
used products you make an important contribution to the protection of the  
environment.  
Please contact your local authorities in case you need more information  
on the collection points in your area.  
Dispose of the battery pack in an environmentally-friendly manner  
according to your local regulations.  
Disposal of The Device (environment)  
15  
 
6. Cleaning  
Clean the MBP33 with a slightly damp cloth or with an anti-static cloth.  
Never use cleaning agents or abrasive solvents.  
Cleaning and care  
• Do not clean any part of the product with thinners or other solvents  
and chemicals –- this may cause permanent damage to the product  
which is not covered by the warranty.  
• Keep your MBP33 away from hot, humid areas or strong sunlight, and  
don't let it get wet.  
• Every effort has been made to ensure high standards of reliability for  
your MBP33. However, if something does go wrong, please do not try  
to repair it yourself –- contact Customer Service for assistance.  
16  
Cleaning  
 
7. Help  
Display  
No display  
• Try recharging or replacing the battery pack.  
• Reset the units. Disconnect the battery pack of the parent unit and  
unplug both the units' electrical power, then plug them back in.  
• Is the unit turned on?  
Press and hold the ON/OFF key P on the parent unit to turn it ON.  
• Is the correct camera selected?  
Change the camera number, if necessary.  
• Is the video display turned on?  
Press the VIDEO ON/OFF key V to turn it on.  
• When operating using batteries, only the Display will go blank after 2  
minutes to save power. The unit is still active and will give you audio  
alerts. You can reactivate the screen by pressing any key.  
Registration  
If the Baby Unit has lost its link with the Parent Unit  
• Try recharging or replacing the battery pack.  
• If the Baby Unit is too far away it may be going out of range, so move  
the Baby Unit closer to the Parent Unit.  
• Reset the units by disconnecting them from the battery and electrical  
power. Wait about 15 seconds before reconnecting. Allow up to one  
minute for the Baby Unit and the Parent Unit to synchronize.  
• See 2.4 Registration (Pairing), if there is a need to re-register the  
units.  
Help  
17  
 
Interference  
Noise interference on your parent unit  
Your baby and parent units may be too close. Move them farther apart.  
• Make sure there is at least 3 to 6 feet between the 2 units to avoid  
audio feedback.  
• lf the baby unit is too far away it may be out of range, so move the  
baby unit closer to the parent unit.  
• Make sure the baby and parent units are not near other electrical  
equipment, such as a television, computer or cordless/mobile telephone.  
• Use of other 2.4GHz products, such as wireless networks (WiFi  
routers), Bluetooth® systems, or microwave ovens, may cause  
interference with this product, so keep the baby monitor away at least  
5ft (1m) from these types of products, or turn them off if they appear to  
be causing interference.  
• If the signal is weak, try moving the Parent and/or Baby Unit to  
different positions in the rooms.  
18  
Help  
8. General Information  
lf your product is not working properly....  
1. Read this User's Guide or the Quick Start Guide.  
2. Visit our website:  
3. Contact Customer Service:  
US and Canada 1-888-331-3383  
UK  
0845 218 0890  
To order a replacement battery pack, contact customer service or visit our  
website.  
Consumer Products and Accessories Limited  
Warranty ("Warranty")  
Thank you for purchasing this Motorola branded product manufactured  
under license by Binatone Electronics International LTD ("BINATONE").  
What Does this Warranty Cover?  
Subject to the exclusions contained below, BINATONE warrants that this  
Motorola branded product ("Product") or certified accessory  
("Accessory") sold for use with this product that it manufactured to be  
free from defects in materials and workmanship under normal consumer  
usage for the period outlined below. This Warranty is your exclusive  
warranty and is not transferable.  
Who is covered?  
This Warranty extends only to the first consumer purchaser, and is not  
transferable.  
General Information  
19  
 
What will BINATONE do?  
BINATONE or its authorized distributor at its option and within a  
commercially reasonable time, will at no charge repair or replace any  
Products or Accessories that does not conform to this Warranty. We may  
use functionally equivalent reconditioned/ refurbished/ pre-owned or new  
Products, Accessories or parts.  
What Other Limitations Are There?  
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE  
DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE  
REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS  
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE  
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER  
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL  
MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT  
OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS  
OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR  
FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS,  
LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER  
FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE  
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES  
TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY  
LAW.  
Some jurisdictions do not allow the limitation or exclusion of incidental or  
consequential damages, or limitation on the length of an implied  
warranty, so the above limitations or exclusions may not apply to you.  
This Warranty gives you specific legal rights, and you may also have  
other rights that vary from one jurisdiction to another.  
20  
General Information  
Products Covered  
Length of Coverage  
Consumer Products  
One (1) year from the date of the  
products original purchase by the first  
consumer purchaser of the product.  
Ninety (90) days from the date of the  
accessories original purchase by the  
first consumer purchaser of the  
product.  
Consumer Accessories  
Consumer Products and  
The balance of the original  
Accessories that are Repaired warranty or for Ninety (90) days  
or Replaced  
from the date returned to the  
consumer, whichever is longer.  
Exclusions  
Normal Wear and Tear. Periodic maintenance, repair and replacement  
of parts due to normal wear and tear are excluded from coverage.  
Batteries. Only batteries whose fully charged capacity falls below 80% of  
their rated capacity and batteries that leak are covered by this Warranty.  
Abuse & Misuse. Defects or damage that result from: (a) improper  
operation, storage, misuse or abuse, accident or neglect, such as  
physical damage (cracks, scratches, etc.) to the surface of the product  
resulting from misuse; (b) contact with liquid, water, rain, extreme  
humidity or heavy perspiration, sand, dirt or the like, extreme heat, or  
food; (c) use of the Products or Accessories for commercial purposes or  
subjecting the Product or Accessory to abnormal usage or conditions; or  
(d) other acts which are not the fault of MOTOROLA or BINATONE, are  
excluded from coverage.  
Use of Non-Motorola branded Products and Accessories. Defects or  
damage that result from the use of Non-Motorola branded or certified  
Products or Accessories or other peripheral equipment are excluded from  
coverage.  
General Information  
21  
Unauthorized Service or Modification. Defects or damages resulting  
from service, testing, adjustment, installation, maintenance, alteration, or  
modification in any way by someone other than MOTOROLA, BINATONE  
or its authorized service centers, are excluded from coverage.  
Altered Products. Products or Accessories with (a) serial numbers or  
date tags that have been removed, altered or obliterated; (b) broken seals  
or that show evidence of tampering; (c) mismatched board serial  
numbers; or (d) nonconforming or non-Motorola branded housings, or  
parts, are excluded from coverage.  
Communication Services. Defects, damages, or the failure of Products  
or Accessories due to any communication service or signal you may  
subscribe to or use with the Products or Accessories is excluded from  
coverage.  
How to Obtain Warranty Service or Other Information?  
To obtain service or information, please call:  
US and Canada 1-888-331-3383  
UK  
0845 218 0890  
You will receive instructions on how to ship the Products or Accessories  
at your expense and risk, to a BINATONE Authorized Repair Center.  
To obtain service, you must include: (a) the Product or Accessory; (b) the  
original proof of purchase (receipt) which includes the date, place and  
seller of the Product; (c) if a warranty card was included in your box, a  
completed warranty card showing the serial number of the Product; (d) a  
written description of the problem; and, most importantly; (e) your  
address and telephone number.  
These terms and conditions constitute the complete warranty agreement  
between you and BINATONE regarding the Products or Accessories  
purchased by you, and supersede any prior agreement or  
representations, including representations made in any literature  
publications or promotional materials issued by BINATONE or  
representations made by any agent employee or staff of BINATONE, that  
may have been made in connection with the said purchase.  
22  
General Information  
FCC and IC regulations  
FCC Part l5  
NOTE: This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the Federal  
Communications Commission (FCC) rules. These limits are designed to  
provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
Changes or modifications to this equipment not expressly approved by  
the party responsible for compliance could void the user's authority to  
operate the equipment.  
This device complies with Part 15 of the FCC rules. Operation is subject  
to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation. Privacy of  
communications may not be ensured when using this device.  
To ensure safety of users, the FCC has established criteria for the amount of  
radio frequency energy that can be safely absorbed by a user or bystander  
according to the intended usage of the product. This product has been tested  
and found to comply with the FCC criteria. The Baby unit shall be installed  
and used such that parts of the user's body other than the hands are  
maintained at a distance of approximately 20 cm (8 inches) or more.  
This Class B digital apparatus complies with Canadian ICES-003.  
General Information  
23  
WARNING  
Changes or modifications, to this equipment not expressively approved  
by the party responsible for compliance could void the user's authority to  
operate the equipment.  
Industry Canada  
This device complies with Industry Canada licence-exempt RSS standard(s):  
Operation is subject to the following Two conditions:(1) this device may not  
cause interference, and (2) this device must accept any interference,  
including interference that may cause undesired operation of the device.  
The term "IC: " before the certification/registration number only signifies  
that the Industry Canada technical specifications were met. This product  
meets the applicable Industry Canada technical specifications.  
24  
General Information  
Technical Specifications  
Baby unit (Model: MBP33BU)  
Frequency  
Image sensor  
Lens  
2.4GHz to 2.48GHz  
Colour / color CMOS 30M Pixels  
f 2.5mm, F 2.8  
IR LED  
8 pcs  
Power  
Adapter: SCE0591000P; Input: 100-240V, 50/  
60Hz 300mA; Output: 5.9V, 1000mA  
OR  
Adapter: BLJ5W059100P; Input: 100-240V, 50/  
60Hz 150mA; Output: 5.9V, 1000mA  
WARNING  
Use only with provided power supply.  
FCC ID  
IC ID  
VLJ – MBP33BU  
4522A– MBP33BU  
General Information  
25  
Parent unit (Model: MBP33PU)  
Frequency  
Display  
2.4GHz to 2.48GHz  
2.8" diagonal TFT LCD  
16.7M colour / color LCD  
Display colours /  
colors  
Brightness control  
Volume control  
Power  
8 steps  
8 steps  
Adapter: SCB0600500P; Input: 100-240V, 50/  
60Hz 300mA; Output: 6.0V, 500mA  
OR  
Adapter: BLJ5W060050P; Input: 100-240V, 50/  
60Hz 150mA; Output: 6.0V, 500mA  
WARNING  
Use only with provided power supply.  
OR  
Battery: Model - TFL3X44AAA900, NI-MH AAA 3 x  
1.2V 900mAh rechargeable battery pack  
WARNING  
Do not use non-rechargeable batteries for the  
Parent Unit. Risk of explosion if battery is replaced  
by an incorrect type. Dispose of used batteries  
according to the instructions.  
FCC ID  
IC ID  
VLJ – MBP33PU  
4522A– MBP33PU  
26  
General Information  
BINATONE TELECOM PLC  
1 Apsley Way London NW2 7HF,United Kingdom.  
Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877  
k
________________________________________  
.
EC Declaration of Conformity  
We the manufacturer / Importer : Binatone Telecom Plc  
1 Apsley Way London  
NW2 7HF, United Kingdom.  
Declare under our sole responsibility that the following product  
Type of equipment:  
Model Name:  
Digital Baby Monitor  
MBP 33  
Country of Origin:  
Brand:  
China  
Motorola  
complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the  
approximation of the laws of the Member States relating to Radio Spectrum Matters, the  
Council Directive 2004/108/EC on the approximation of the laws of the Member States  
relating to electromagnetic compatibility (EMC) and the European Community Directive  
2006/95/EC relating to Electrical Safety.  
Assessment of compliance of the product with the requirements relating to the essential  
requirements according to Article 3 R&TTE was based on Annex III of the Directive  
1999/5/EC and the following standard:  
Radio Spectrum:  
EMC:  
EN300328 V1.7.1 (2006-10)  
EN301489-17 V1.3.2 (2008-04)  
EN301489-1 V1.8.1 (2008-04)  
EN60950-1:2006+A11:2009+A1:2010  
Electrical Safety:  
The product is labelled with the European Approval Marking CE as show. Any Unauthorized  
modification of the product voids this Declaration.  
Manufacturer / Importer  
(Signature of authorized person)  
London, 10 Apr 11  
Signature: (Paul Tsui/ Product Operation  
Director)  
Place & Date  
Manufactured, distributed or sold by  
Binatone Electronics International LTD.,  
official licensee for this product.  
MOTOROLA and the Stylized M Logo,  
are trademarks or registered trademarks  
of Motorola Trademark Holdings, LLC.  
and are used under license. All other  
trademarks are the property of their  
respective owners.  
© 2011 Motorola Mobility, Inc. All rights  
reserved.  
Version 2.0  
Printed in China  

Minolta W121ca Tsc2 User Manual
Mitsubishi Electronics Peh 7 User Manual
Mitsubishi Mr Slim Nh33nbd User Manual
Motorola Barcode Reader Mc9090 G User Manual
Panasonic Cs Xe9ckr User Manual
Ricoh D015 User Manual
Samsung Apc3240c User Manual
Samsung Aw24p1hbc User Manual
Soleus Air Sg Wac 15ese User Manual
Whirlpool Ar1200 User Manual