Monarch 938 User Manual

Monarch® 938Verifier  
Product Specification  
Assure High Quality Bar Codes  
Performs Industry Standard Bar  
Code Tests  
Fully Integrated Printer Interface  
Used with 9855 , 9855™RFID or  
9860 Printers  
Rugged Stand to assure  
Alignment  
Standard Features  
Dimensions:  
Height – 2.4" (61 mm)  
Width – 4.4" (112 mm)  
Communications Interface:  
DB 9 pin (male) connecting to printer serial port with  
baud rates up to 115200  
Depth – 5.2" (132 mm)  
Weight (Verifier only) – 2.0 lbs. (0.9 kg)  
Shipping Wt. (w/ stand) – 15 lbs. (6.8 kg)  
Display:  
Five LEDs – Power/Sync, Calibration, Read and 2  
programmable  
Supported Bar Code:  
Code 128, Code 39, Code 93, Codabar, Interleaved 2  
of 5, UPC versions A and E (including +2 and +5),  
EAN-13 and EAN-8 (including +2 and +5)  
Warranty:  
One (1) year parts and labor (ship-in).  
Full written warranty statement is available on request.  
Environment Ranges  
Operating Temperature:  
40° to 104° F (4° to 40° C)  
Humidity/Operating and Storage:  
10% to 90% non-condensing  
Storage:  
-4°F to 140°F (-20°C to 60°C)  
Performance  
Laser:  
Power Source:  
Supplied by the printer, no external power is required  
Focus Distance – 8" (203 mm)  
X Dimension – 0.0067" (0.17 mm) minimum  
Wavelength – 650-670 nm  
Bar Code Verification:  
ANSI Method, Traditional Method, Encoded data  
format checks, laser scanning type analyses  
Speed:  
Verifies bar codes at print speeds up to 12 ips  
Stores & Uploads:  
ANSI grade data  
Special Considerations  
Support parallel (picket fence) bar codes only  
Bar code must be in the beam for at least 5 scans  
May require a reduction in print speed based upon  
bar code height  
Maximum of four parallel bar codes across  
Minimum horizontal gap between codes 0.5" (13 mm)  
Minimum feed length for verification is 1.2" (30 mm)  
Maximum number of codes per label is 10  
Allow a 0.5" (13 mm) no scan zone at trailing of  
each label  
Does not work with 926™ knife  
For use with 9855®, requires metal cover or plastic  
verifier cover  
Printer must be configured as verifier-ready  
Documentation available at www.monarch.com  
Avery Dennison Printer Systems Division  
170 Monarch Lane Miamisburg, OH 45342  
1.800.543.6650 Monday-Friday, 8 AM-6:30 PM ET  
©2008 Avery Dennison. All rights reserved.  
Printed in U.S.A. BC-SP-028 Rev. 8/08  

Mitsubishi Electronics 20 L User Manual
Royal Sovereign Arp 1008 User Manual
Samsung Aw0601b User Manual
Samsung Sh12zsgx User Manual
Sharp Fodc600 User Manual
Smc Networks Robo Cylinder Rgs7ad User Manual
Soundgate Automobile Parts Upb 84 User Manual
Stellar Industries Air Conditioner 11 Seer H De024 60 User Manual
White Rodgers Air Conditioner 100e78 User Manual
Xpelair Idh1 8 User Manual