OPERATION AND PARTS MANUAL
SERIES
MODEL MTX-60
TAMPING RAMMER
(HONDA GX100UKRBF GASOLINE ENGINE)
Revision #6 (08/23/11)
To find the latest revision of this
publication, visit our website at:
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
NOTES
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 3
TABLE OF CONTENTS
Honda GX100KRBF Engine
MTX-60 Rammer
Proposition 65 Warning ........................................... 2
Table Of Contents ................................................... 4
Parts Ordering Procedures ..................................... 5
Safety Information ................................................ 6-9
General Information .............................................. 10
Specifications ........................................................ 11
Controls And Components .................................... 12
Basic Engine ......................................................... 13
Operation ......................................................... 14-16
Maintenance ......................................................... 17
Troubleshooting ............................................... 18-19
Explanation Of Code In Remarks Column ............ 20
Suggested Spare Parts ......................................... 21
Cylinder Barrel Assembly. ................................ 36-37
Crankcase Cover Assembly. ............................ 38-39
Crankshaft Assembly. ....................................... 40-41
Piston/Connecting Rod Assembly..................... 42-43
Camshaft Assembly. ......................................... 44-45
Recoil Starter Assembly. .................................. 46-47
Fan Cover Assembly......................................... 48-49
Carburetor Assy (S/N T-3423 and Below) ........ 50-51
Carburetor Assy (S/N T-3424 and Above)........ 52-53
Air Cleaner Assembly. ...................................... 54-55
Muffler Assembly. ............................................. 56-57
Flywheel Ignition Assembly. ............................. 58-59
Control Assembly.............................................. 60-61
Labels Assembly............................................... 62-63
Component Drawings
Terms And Conditions Of Sale — Parts ................ 64
Nameplate And Decals..................................... 22-23
Crankcase And Engine Assembly..................... 24-25
Crankcase And Engine Assembly..................... 26-27
Guide Cylinder Assembly. ................................ 28-29
Foot Assembly. ................................................. 30-31
Fuel Tank And Handle Assembly. ..................... 32-33
Combination Lever Assembly. .......................... 34-35
Specification and part number are
subject to change without notice.
PAGE 4 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
PARTS ORDERING PROCEDURES
Ordering parts has never been easier!
Choose from three easy options:
Effective:
January 1st, 2006
Best Deal!
Order via Internet (Dealers Only):
Order parts on-line using Multiquip’s SmartEquip website!
If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.
N View Parts Diagrams
N Order Parts
N Print Specification Information
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
to log in and save!
Order Parts
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Order via Fax (Dealers Only):
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Note: Discounts Are Subject To Change
Domestic (US) Dealers Call:
Order via Phone:
1-800-427-1244
Non-Dealer Customers:
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
When ordering parts, please supply:
R
Dealer Account Number
R
Specify Preferred Method of Shipment:
R
R
R
R
R
Dealer Name and Address
ꢀ UPS/Fed Ex
ꢀ DHL
ꢀ Truck
N
N
Priority One
Ground
Shipping Address (if different than billing address)
Return Fax Number
N Next Day
Second/Third Day
Applicable Model Number
N
Quantity, Part Number and Description of Each Part
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
WE ACCEPT ALL MAJOR CREDIT CARDS!
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 5
SAFETY INFORMATION
Do not operate or service the equipment before reading
the entire manual. Safety precautions should be followed
at all times when operating this equipment.
Failure to read and understand the safety
messages and operating instructions could
result in injury to yourself and others.
Potential hazards associated with the operation of this
equipment will be referenced with hazard symbols which
may appear throughout this manual in conjunction with
safety messages.
SAFETY MESSAGES
The four safety messages shown below will inform you
about potential hazards that could injure you or others.The
safety messages specifically address the level of exposure
to the operator and are preceded by one of four words:
DANGER,WARNING, CAUTION or NOTICE.
SAFETY SYMBOLS
DANGER
Indicates a hazardous situation which, if not avoided,
WILL result in DEATH or SERIOUS INJURY.
WARNING
Indicates a hazardous situation which, if not avoided,
COULD result in DEATH or SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided,
COULD result in MINOR or MODERATE INJURY.
NOTICE
Addresses practices not related to personal injury.
PAGE 6 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
SAFETY INFORMATION
„ ALWAYS know the location of the nearest phone or keep a
phone on the job site. Also, know the phone numbers of
the nearest ambulance, doctor and fire department. This
information will be invaluable in the case of an emergency.
GENERAL SAFETY
CAUTION
„ NEVER operate this equipment without proper protective
clothing, shatterproof glasses, respiratory protection,
hearing protection, steel-toed boots and other protective
devices required by the job or city and state regulations.
RAMMER SAFETY
DANGER
„ NEVER operate the equipment in an explosive
atmosphere or near combustible materials.An
explosion or fire could result causing severe
bodily harm or even death.
„ NEVER operate this equipment when not
feeling well due to fatigue, illness or when
under medication.
„ NEVER operate this equipment under the influence of
drugs or alcohol.
WARNING
„ NEVER disconnect any emergency or safety devices.
These devices are intended for operator safety.
Disconnection of these devices can cause severe injury,
bodily harm or even death.Disconnection of any of these
devices will void all warranties.
„ ALWAYS check the equipment for loosened threads or
bolts before starting.
„ DO NOT use this machine on ground that is harder than
the machine can handle, or for driving pilings or tamping
rock beds. Furthermore, use of the machine on sloping
ground, such as the side of an embankment, may make
the machine unstable and can cause an accident. It can
also result in premature machine wear due to uneven
loads on the machine.
„ DO NOT use the equipment for any purpose other than
its intended purposes or applications.
NOTICE
„ This equipment should only be operated by trained and
qualified personnel 18 years of age and older.
„ Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
Use the machine with confidence for tamping earth and
sand, soil, gravel, and asphalt.DO NOT use the machine
for other types of jobs.
„ Manufacturer does not assume responsibility for any
accident due to equipment modifications. Unauthorized
equipment modification will void all warranties.
CAUTION
„ NEVER lubricate components or attempt service on a
running machine.
„ NEVER use accessories or attachments that are not
recommended by Multiquip for this equipment. Damage
to the equipment and/or injury to user may result.
NOTICE
„ ALWAYS keep the machine in proper running condition.
„ ALWAYS know the location of the nearest
fire extinguisher.
„ Fix damage to machine and replace any broken parts
immediately.
„ ALWAYS know the location of the nearest
first aid kit.
„ ALWAYS store equipment properly when it is not being
used.Equipment should be stored in a clean, dry location
out of the reach of children and unauthorized personnel.
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 7
SAFETY INFORMATION
ENGINE SAFETY
DANGER
FUEL SAFETY
DANGER
„ The engine fuel exhaust gases contain poisonous carbon
monoxide. This gas is colorless and odorless, and can
cause death if inhaled.
„ DO NOT add fuel to equipment if it is placed inside truck
bed with plastic liner. Possibility exists of explosion or
fire due to static electricity.
„ The engine of this equipment
requires an adequate free flow
of cooling air.NEVER operate
this equipment in any enclosed
or narrow area where free flow
of the air is restricted.If the air
flow is restricted it will cause
injury to people and property
and serious damage to the
equipment or engine.
WARNING
„ DO NOT place hands or fingers inside engine
compartment when engine is running.
„ NEVER operate the engine with heat shields or
guards removed.
„ DO NOT start the engine near spilled fuel or combustible
fluids. Fuel is extremely flammable and its vapors can
cause an explosion if ignited.
„ DO NOT remove the engine oil drain plug
while the engine is hot. Hot oil will gush
out of the oil tank and severely scald any
persons in the general area of the rammer.
„ ALWAYS refuel in a well-ventilated area, away from
sparks and open flames.
„ ALWAYS use extreme caution when working with
flammable liquids.
CAUTION
„ NEVER touch the hot exhaust manifold,
muffler or cylinder.Allow these parts to cool
before servicing equipment.
„ DO NOT fill the fuel tank while the engine is running
or hot.
„ DO NOT overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or sparks from
the ignition system.
NOTICE
„ NEVER run engine without an air filter or with a dirty air
filter.Severe engine damage may occur.Service air filter
frequently to prevent engine malfunction.
„ Store fuel in appropriate containers, in well-ventilated
areas and away from sparks and flames.
„ NEVER tamper with the factory settings
of the engine or engine governor. Damage
to the engine or equipment can result
if operating in speed ranges above the
maximum allowable.
„ NEVER use fuel as a cleaning agent.
„ DO NOT smoke around or near the
equipment. Fire or explosion could result
from fuel vapors or if fuel is spilled on a
hot engine.
PAGE 8 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
SAFETY INFORMATION
TRANSPORTING SAFETY
CAUTION
„ NEVER allow any person or animal to stand underneath
the equipment while lifting.
NOTICE
„ Before lifting, make sure that the equipment parts (hook
and vibration insulator) are not damaged and screws are
not loose or missing.
„ Always make sure crane or lifting device has been
properly secured to the lifting bail (hook) of the
equipment.
„ ALWAYS shutdown engine before transporting.
„ NEVER lift the equipment while the engine is running.
„ Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling.
„ Use adequate lifting cable (wire or rope) of sufficient
strength.
„ Use one point suspension hook and lift straight
upwards.
„ DO NOT lift machine to unnecessary heights.
„ ALWAYS tie down equipment during transport by
securing the equipment with rope.
„ Never allow any person or animal to stand underneath the
equipment while lifting.
ENVIRONMENTAL SAFETY
NOTICE
„ Dispose of hazardous waste properly.
Examples of potentially hazardous waste
are used motor oil, fuel and fuel filters.
„ DO NOT use food or plastic containers to dispose of
hazardous waste.
„ DO NOT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 9
GENERAL INFORMATION
DEFINITION OF TAMPING RAMMER
CAUTION — Handle Operation
The Mikasa MTX-60 tamping rammer is a powerful
compacting tool capable of applying a tremendous force
in consecutive impacts to a soil surface. Its applications
include soil compacting for road, embankments and
reservoirs as well as backfilling for gas pipelines, water
pipelines and cable installation work.
Before starting operation check the
lifting handle to:
1. Make sure that there is no damage on the bolts.
The impact force of the MTX-60 levels and uniformly
compacts voids between soil particles to increase dry
density.
2. Make sure that there is no crack or breakage on
handle.
3. Make sure that there is no fissure on the surface. If
there is any abnormality or damage, replace with
new one.
Circular motion is converted to create impact force. The
MTX-60 tamping rammer develops a powerful compacting
force at the foot of the rammer. To maintain optimum
performance, proper operation and service are essential.
For operation:
CONSTRUCTION OF TAMPING RAMMER
This handle is to be used to lift up the shoe part of the
machine with the body laid down on the ground or truck
bed.
The Mikasa MTX-60 is equipped with an air cooled, four-
cycle gasoline engine. Transmission of the power takes
place by increasing the engine speed to engage the
centrifugal clutch.
1. Use proper lifting techniques to avoid back injury.
This handle is for manual lifting only.
2. Do not use this handle as a rammer lift point. Use
the lifting point on the top of the machine.
RAMMER GEARBOX AND SPRING CYLINDER
The Mikasa MTX-60 uses an oil bath lubrication system.
Always check the oil level through the oil level sight glass
at the rear of the tamper foot.
3. Do not move the rammer with the lifting handle and
the front rollers more than 16 feet (5 meters).
CONTROLS
Before starting the MTX-60 Tamping Rammer identify and
understand the function of the controls.
PAGE 10 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
SPECIFICATIONS
Table 1. MTX-60 Rammer Specifications
38.8 in. (985 mm)
Overall Height
Overall Width
13.8 in. (350 mm)
28.1 in. (713 mm)
10.4 x 13.4 in. (265 x 340 mm)
2.1 qt. (2 liters)
Over Length
Shoe Size (Wx L)
Fuel Tank Capacity
Lubrication Oil Capacity
No. of Blows
0.69 qt. (0.65 liter)
644 - 695 vpm (10.7 - 11.6 Hz)
3,060 lbf (13.6 kN)
2 - 3.2 in. (50 - 80 mm)
141 lbs. (64 kg)
Impact Force
Impact Plate Stroke
Operating Weight
Measured Sound Power Level
Guaranteed Sound Power Level
Max. Sound Pressure Level
103 dB
107 dB
92 dB
Table 2. Engine Specifications
Model
Honda GX100UKRBF Engine
Air-Cooled 4 Stroke, Overhead camshaft,
single cylinder gasoline engine
Type
Piston Displacement
Max. Output
6.0 cu.in. (98 cc)
3.0 hp/3,600 rpm (2.2 KW)
3,800 - 4,100 rpm
Max. Governed Speed, No Load
Cooling System
Air-Cooled
Engine Oil Capacity
Fuel
0.3 qt. (0.28 liters)
Unleaded gasoline
Automobile Oil; Class SE or higher
Recoil Starter
Lubricant for Engine
Starting System
Spark Plug Type
NGK CR5HSB
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 11
CONTROLS AND COMPONENTS
3
2
4
10
5
1
9
6
11
7
8
12
13
Figure 1. MTX-60 Rammer
Figure 1 shows the location of the controls and compo-
nents for the MTX-60 Tamping Rammer. The functions of
each control is described below:
9. FuelTank – Holds the fuel for the unit (up to 3.2 quarts)
10. Muffler – reduces the noise of the engine when run-
ning.
1. Combination (Throttle) Lever – Used to adjust
engine speed (rpm). Move lever forward (SLOW) to
reduce engine speed, move lever back toward operator
(FAST) to increase speed. Always operate the rammer
at full speed (rpm).
11. Engine – this unit uses a Honda GX100UKRBF
gasoline engine.
12. OilGauge(SightGlass)–Indicatesthelevelofoilinthe
oil bath reservoir.
13. Drain Valve – Open this valve to remove oil from the
2. Handle – To operate rammer, GRIP handle assembly
bellows.
firmly on both sides.
3. Fuel Tank Cap – Remove this cap to add unleaded
gasoline to the fuel tank. Make sure cap is tightened
securely. DO NOT over fill.
WARNING — Fuel Hazard
Adding fuel to the tank should be
accomplished only when the
engine is stopped and has had an
opportunity to cool down. In the
event of a fuel spill, DO NOT
attempt to start the engine until the
fuel residue has been completely
wiped up, and the area surrounding
the engine is dry.
4. Hook – Used to lift rammer for transporting.
5. Air Cleaner Cover – Protects the air cleaner which
preventsdirtandotherdebrisfromenteringtheengine.
6. Roller – Allows rammer to be moved around easily by
rolling the unit.
7. Bellows – Reservoir for oil bath.
8. Foot – Laminated wood with tempered steel plate for
superior shock absorption.
PAGE 12 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
BASIC ENGINE
Figure 2. Engine Controls and Components
(Honda GX100)
The engine (Figure 2) must be checked for proper lubrica-
tion and filled with fuel prior to operation. Refer to the
engine manufacturer's manual for detailed operation and
service information.
4. Muffler – Used to reduce noise and emissions.
5. Dipstick/Oil Filler Cap – Remove this cap to
determine if the engine oil is low. Add oil through this
filler port as recommended in Table 3.
1. Choke Lever – Normally used in starting the engine
in cold weather conditions. In cold weather, turn the
choke lever to the fully closed position. In warm
weather, set the choke lever halfway or completely
open.
6. Oil Drain Plug – Remove this plug to remove oil from
the engine's crankcase.
WARNING — Hot Engine
2. Spark Plug – Provides spark to the ignition system.
Set spark plug gap to 0.024 - 0.028 inch (0.6 - 0.7 mm).
Clean spark plug once a week.
Engine components can generate
extreme heat.To prevent burns, DO
NOT touch these areas while the
engine is running or immediately
after operating.NEVER operate the
engine with the muffler removed.
3. Recoil Starter (pull rope) – Manual-starting method.
Pull the starter grip until resistance is felt, then pull
briskly and smoothly.
Operating the engine without an air
filter, with a damaged air filter, or a
filter in need of replacement will allow
dirt to enter the engine, causing rapid
engine wear.
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 13
OPERATION
This section is intended to assist the operator with the ini-
tial start-up of the MTX-60Tamping Rammer.It is extremely
important that this section be read carefully before attempt-
ing to operate the rammer.
ENGINE
1. Fill the fuel tank (Figure 3) with unleaded gasoline. At
the same time, check the engine oil and make it a habit
to replenish it often (Figure 4).
DO NOT use your rammer until this section is thoroughly
understood.
FUEL
TANK
CAUTION — Understand Operation
Failure to understand the operation of the Tamping
Rammer could result in severe damage to the unit or
personal injury.
RAMMER CRANKCASE AND SPRING CYLINDER
OIL BATH
Figure 3. Fuel Tank
This unit uses an oil bath lubrication system. Perform the
following:
OIL LEVEL
DIPSTICK
1. Check the oil level through the oil level sight glass
(Figure 2) at the rear of the tamper foot.
OIL FILL PLUG
SIGHT GLASS
OIL DRAIN PLUG
Figure 4. Engine Oil Dipstick
2. Low levels of oil may result in engine seizure due to
high levels of consumption during operations.
3. Check the engine oil level and if the engine oil level is
low, it should be refilled. Use the proper motor oil as
suggested in the Table 3 below.
Figure 2. Foot Housing Sight Glass
2. If oil is not visible, add 10W-30 SE, SF or higher grade
motor oil into the oil fill plug opening (Figure 2). The
bath contains approximately 1.7 pints (800 cc.)
Table 3. Motor Oil Grade
Grade of motor oil
Season or Temperature
(higher than MS class)
Spring, Summer or Autumn
SAE 30
The oil level should be kept at the half
way point of the sight glass.
+120° F to +15° F
Winter
SAE 30
+40° F to +15° F
Below +15° F
SAE 10W-30
PAGE 14 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
OPERATION
INSPECTION
DO NOT press the primer pump bulb
more than four (4) times, as this will cause
fuel to flood the carburetor.
1. Check all nuts, bolts fasteners for tightness. Retighten
as necessary.
2. Clean any dirt from the recoil starter and foot pedestal.
Wipe the entire unit clean before operating.
3. Place the choke lever to the closed position.When the
weather is cold, close the choke all the way.When it is
hot, or if the engine is hot, open the choke a little or
leave it fully open.
3. Replace any missing or damaged Safety Operation
decals.
4. Adjust height of handle. Adjust handle by loosening
nuts and moving handle to suit operation. Retighten
nuts.
CHOKE LEVER
(CLOSED POSITION)
INITIAL START-UP
When starting the MTX-60 Tamping Rammer perform the
following:
1. Slide the throttle lever from the stop to the idle position
Figure 6. Choke Lever
(
) (Figure 5).This opens the fuel cock and the engine
4. Grip the starter rope handle (Figure 7) and pull it until
you feel a slight resistance. Then pull sharply and
quickly. Return the handle to the starter case before
releasing.
electrical circuit is turned on automatically.
THROTTLE LEVER
(IDLE POSITION)
STARTER
ROPE
Figure 5-A. Throttle Lever (Idle Position)
2. Units with Carburetor Primer System: Push the
primer pump bulb four (4) times to deliver fuel to the
carburetor (Figure 5-B).
Figure 7. Recoil Starter
5. If engine fails to start, move the choke lever (Figure
6) to the half open position to avoid flooding.
6. Repeat steps 1 thru 5.
7. If the engine does not start after repeated attempts,do
the following:
a. Check fuel delivery from fuel tank to carburetor.
b. Check for restrictions to fuel flow at in-tank filter.
c. Check for restrictions to fuel flow at in-line filter.
d. Inspect spark plug for contamination and proper gap.
Clean, adjust or replace spark plug as required.
Figure 5-B. Primer Pump
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 15
OPERATION
OPERATION
STOPPING THE ENGINE
1. To start the rammer tamping action, move the throttle
1. Move throttle lever quickly from the START to IDLE
position (Figure 9) and run the engine for three minutes
at low speed.After the engine cools, move the throttle
lever to the STOP position (Figure 10).The engine will
stop and the fuel cock is automatically closed.
lever (Figure 8) quickly from IDLE to the START
(
) position. DO NOT move the throttle lever slowly
as this may cause damage to the clutch or spring.
THROTTLE LEVER
(STOP POSITION)
THROTTLE LEVER
(START POSITION)
Figure 8. Throttle Lever (Start Position)
CAUTION — Operate at Full Speed
Figure 10. Throttle Lever (Stop Position)
2. If the engine does not stop due to a problem with the
switch or the like, move the machine to a safe location
and hold the throttle lever in the stop position. Let the
machine run on idle and the machine will stop after a
few minutes.
Make sure that the throttle lever is moved to the FULL
START position. Operating the rammer at less than full
speed can result in damage to the clutch springs or
foot.
2. The MTX-60 tamping rammer is designed to run at 3,800
to 4,100 rpm. At optimum rpm the foot hits at the rate
between 644 ~ 695 impacts per minute. Increasing
throttle speed past factory set rpm does not increase
impacts and may damage unit.The MTX-60 is designed
to advance while tamping. For faster advance, pull back
slightlyonthehandlesothatrearof foot contactssoil first.
3. To stop the tamping action, move throttle lever quickly
from START to IDLE position (Figure 9).
THROTTLE LEVER
(IDLE POSITION)
Figure 9. Throttle Lever (Idle Position)
PAGE 16 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
MAINTENANCE
Perform the scheduled maintenance procedures as indicated:
EVERY 200 HOURS
DAILY
Remove the oil drain plug on foot housing (Figure 13)
and drain the oil. Refill with approximately 0.69 qt. (0.65
liter) of 10W-30 SE, SF or higher grade motor oil. Oil
should be midway in sight glass. Break in oil should be
changed after first 50 hours.
Thoroughly remove dirt and oil from the engine and
control area.
Clean or replace the air cleaner elements as necessary.
Check and retighten all fasteners as necessary.
OIL FILL PLUG
SIGHT GLASS
Check the spring box and bellows for oil leaks. Repair or
replace as needed.
EVERY 50 HOURS
OIL DRAIN PLUG
Remove the fuel filter cap and clean the inside of the
fuel tank (Figure 11).
Figure 13. Oil Drain Plug
EVERY 2YEARS
Replace the fuel line every 2 years even if there is no
visible damage.
FUEL FILTER
LONG TERM STORAGE
Slide the throttle lever to the STOP position.
Drain any fuel including in the fuel hose.
Figure 11. Fuel Filter
Remove and clean the spark plug, then adjust the spark
gap to 0.024~0.028 inch (0.6~0.7 mm).
Replace lubrication oil and apply grease to lubrication
points.
EVERY 80 TO 100 HOURS
Cover the air intake on the air cleaner and the exhaust
outlet on the muffler.
Remove the air cleaner cover. Loosen and remove the 2
screws that hold the cover to the air cleaner assembly. If
the primary element (Figure 12) is dirty, wash it with
gasoline or kerosene.Then dip it in engine oil (SAE10W-
30) and wring the element so that 25 to 30 cc of engine
oil remains on the element.
Store unit indoors covered with plastic sheet in moisture
free and dust free location out of direct sunlight.
PRIMARY
ELEMENT
Figure 12. Air Cleaner Primary Element
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 17
TROUBLESHOOTING
TABLE 4. Engine Troubleshooting
Possible Problem
Symptom
Solution
Difficult to start
Fuel is available but spark
plug will not ignite. (Power
available at high tension
cable).
Ignition plug being bridged?
Carbon deposit at ignition?
Check ignition system.
Clean or replace ignition.
Short circuit due to defective Replace insulators.
insulators?
Improper spark gap?
Set spark plug gap to the correct gap.
Fuel is available but spark
plug will not ignite. (Power
NOT available at high
tension cable).
Short circuit at stop switch?
Check stop switch circuit. Replace stop switch if
defective.
Ignition coil defective?
Replace ignition coil.
Fuel is available and spark Muffler clogged with carbon
Clean or replace muffler.
plug ignites (compression
deposits?
normal).
Fuel in use inadequate
(water, dust)?
Flush fuel system and replace with fresh fuel.
Air Cleaner clogged?
Clean or replace air cleaner.
Replace cylinder.
Fuel is available and spark Cylinder worn?
plug ignites (compression
Spark plug loose?
Tighten spark plug.
low).
Low compression.
Operation not satisfactory
Incorrect valve adjustment?
Check and adjust valves.
Not enough power
available (compression
normal, no misfiring).
Air cleaner clogged?
Air in fuel line?
Clean or replace air cleaner.
Bleed (remove air) from fuel line.
Carbon deposits in cylinder? Clean or replace cylinder.
Not enough power
available (compression
normal, misfiring).
Ignition coil defective?
Flush fuel system and replace with fresh fuel.
Ignition plug often shorts?
Replace ignition wires, clean ignition.
Fuel in use inadequate
(water, dust)?
Flush fuel system and replace with fresh fuel.
PAGE 18 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
TROUBLESHOOTING
TABLE 4. Engine Troubleshooting (continued)
Symptom
Possible Problem
Solution
Operation not satisfactory
Governor adjustment improper?
Governor spring defective?
Fuel flow erratic?
Adjust governor to correct level.
Clean or replace ignition.
Check fuel line.
Rotational speed
fluctuates.
Air taken in through suction line? Check suction line.
Dust in rotating part?
Spring failure?
Clean recoil starter assembly.
Replace spiral spring.
Recoil starter not
working properly.
MIxed fuel quality is inadequate? Check fuel to oil mixture.
Excessive carbon deposits in
combustion chamber?
Clean or replace crankcase.
Engine overheats.
Exhaust or muffler clogged with
carbon?
Clean or replace muffler.
Spark plug heat value incorrect? Replace spark plug with correct type spark plug.
TABLE 5. Rammer Troubleshooting
Symptom
Possible Problem
Solution
Operating speed of throttle
lever is incorrectly set?
Set throttle lever to correct position.
Oil in excess?
Drain excess oil. Bring to correct level.
Replace or adjust clutch.
Engine runs but rammer
jumps erratically or not
at all.
Clutch slips?
Spring Failure?
Replace spiral spring.
Speed of engine improper?
Soil over-compacted?
Adjust engine speed to correct operating RPM setting.
Shut down machine and test soil.
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 19
EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and
QTY. Column
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
Numbers Used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice.Multiquip
does not guarantee the availability of the parts listed.
A blank entry generally indicates that the item is not sold
separately.Other entries will be clarified in the“Remarks”
Column.
SAMPLE PARTS LIST
REMARKS Column
NO. PART NO. PART NAME
QTY. REMARKS
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
1
2%
12345
BOLT......................1 .....INCLUDES ITEMS W/%
WASHER, 1/4 IN............NOT SOLD SEPARATELY
WASHER, 3/8 IN....1 .....MQ-45T ONLY
2% 12347
3
4
12348
12349
HOSE ..................A/R ...MAKE LOCALLY
BEARING ..............1 .....S/N 2345B AND ABOVE
Assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
NO. Column
Indicated by:
Unique Symbols — All items with same unique
symbol
“INCLUDES ITEMS W/(unique symbol)”
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Serial Number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific Model Number Use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
PART NO. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
“Make/Obtain Locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items.Examples include battery cables, shims,
and certain washers and nuts.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
“Not Sold Separately”— Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.
PAGE 20 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
SUGGESTED SPARE PARTS
MTX-60 RAMMER 1 TO 3 UNITS WITH HONDA
GX100UKRBF ENGINE
Qty.
P/N
Description
1 ......... 956100062 ............. THROTTLE WIRE
3 ......... 366010070 ............. PRIMARY ELEMENT, AIR CLEANER
3 ......... 366010080 ............. SECONDARY ELEMENT, AIR CLEANER
1 ......... 366345570 ............. CAP, FUEL TANK W/ STRAP
2 ......... 16910Z4ES21 ........ FILTER, IN-LINE FUEL
3 ......... 9805655757 ........... SPARK PLUG
1 ......... 959300770 ............. STRAINER, FUEL TANK
1 ......... 28462Z0DV02 ........ ROPE, RECOIL STARTER
Part numbers on this Suggested Spare
Parts List may supersede/replace the P/N
shown in the text pages of this book.
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 21
NAMEPLATE AND DECALS
NAME PLATE AND DECALS ASSY.
1
4
20
0
2
#
2
3
5
STOP
0
2
#
0
2
#
7
0
2
#
,
6
11
8
k
g
i
_
q
_
>
q
_
l
e
w
m
>
a
m
L
J
j
r
b
O
K
R
K
Q
J
q
“
…
‰
“
K
†
J
a
†
‡
—
‚
K
‰
“
J
r
‰
—
J
h
Ž
Œ
/
1
&
'
.
5
'
4
+
#
.
0
1
9
'
+
)
*
6
M
I
N
D
U
1
7
6
2
7
6
M
Y
R
U
Made in Japan
b
‡
‘
’
‡
€
“
’
ƒ
‚
>
€
—
>
k
s
j
r
g
o
s
g
n
>
g
l
a
L
a
‘
Œ
J
a
Š
„
Œ
‡
J
s
L
q
L
_
L
NPA-0000
series
quick manual
Engine Oil
Use SAE 10W/30,SE or higher grade motor oil
RAMMING CYLINDER OIL
Use SAE 10W/30,SF or higher grade moter oil
Fuel
Use normal quality gasoline
PAGE 22 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
NAMEPLATE AND DECALS
NAME PLATE AND DECALS ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
920212910
920212460
920212470
920212490
920212480
920210310
920212840
920212540
PART NAME
QTY.
REMARKS
OPERATION DECAL
1
AIR CLEANER DECAL ................................................ 1 ........ NPA-1246
LEVER OPERATION DECAL
MAX SPEED DECAL 4100
MACHINE STOP DECAL
EC NOISE REQ. DECAL LWA107
CHOKE OPERATION DECAL
QUICK MANUAL
1
1
1
1
1
1
11
20
SERIAL PLATE NO. ..................................................... 1 ........CONTACT MQ PARTS DEPT.
ANTI- VIB. HANDLE DECAL
920212520
1
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 23
CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
47
45
48
46
46
48
36-4
36-3
36-2
71-1
71-2
71-3
36-1
36
36-7
36-9
36-8
66
122
72
41
77
42-1
74
76
51
36-5
42-2
42-3
58
54-1
54-2
32-1
32-1
40
43-2
43-1
34
75
52
31
39 37
53
49
38
23
NEW
62
35
73
STYLE
62
CLUTCH
121
33
62
54-2
54-1
OLD
STYLE
CLUTCH
24
25-2
44
23
1
25-1
49
56
29
4
17
16
26
57
5
9
28
14
90
2
62
11
10
12
3
62
55
61
55
7
58
52
53
6
19
101
15
13
63
64
54-2
20
50
54-1
21
PAGE 24 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
NO.
PART NO.
368119170
009120204
041006007
368347410
060404010
080200350
080100620
040006203
040006305
080100620
080200170
080200250
368347250
040006304
080100520
080200200
047940060
050710100
001520825
366346210
366348550
952401450
001220825
030208200
368217640
001710840
022611010
368347490
001211030
030210250
939010270
030208200
020308060
366118640
PART NAME
QTY.
REMARKS
1
CRANKCASE CP......................................................... 1 ........INCLUDES ITEM W/
*
2
*
3
4
5
6
7
9
STUD BOLT 10X50X21T/21S
BEARING 6007Z
PINION DRUM
OIL SEAL TC - 40528
STOP RING S-35
STOP RING R-62
BEARING 6203
BEARING 6305
STOP RING R62
STOP RING S-17
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8
10
11
12
13
14
15
16
17
19
20
21
23
23
24
25-1
25-2
26
28
29
31
32-1
32-2
33
34
35
36
STOP RING R-62
CONNECTING ROD
BEARING 6304
STOP RING R- 52
STOP RING S- 20
NEEDLE BEARING FJ- 1816
O- RING AS568- 267
SOCKET HEAD BOLT 8X25 T
CLUTCH ASSY ............................................................ 1 ........S/N S-1880 AND BELOW
CLUTCH ASSY ............................................................ 1 ........S/N S-1881 AND ABOVE
WASHER 8.5X22X3
BOLT 8X25 T
WASHER, LOCK M8
ENGINE FLANGE
SOCKET HEAD BOLT 8X40 T
FLANGE NUT M10 H
SHOCK ABSORBER BRACKET 60
BOLT 10X30 H
WASHER, LOCK M10
STOPPER RUBBER (70)
WASHER, LOCK M8
NUT M8
1
1
1
1
4
4
1
4
4
1
1
1
AIR CLEANER ASSY .................................................. 1 ........INCLUDES ITEMS W/ #
36-1# 366010010
36-2# 366010020
36-3# 030206150
36-4# 366010040
36-5# 366010050
36-7# 366010070
36-8# 366010080
36-9# 366030040
AIR CLEANER COVER
WASHER, FLAT M6 (6.5X18X1.5)
WASHER, LOCK M6
1
2
2
2
1
1
1
1
1
1
1
1
COIN BOLT M6
AIR CLEANER BASE CP
PRIMARY ELEMENT CP
SECONDARY ELEMENT
GRIP BPLT CP
37
38
39
40
366345470
954407681
954407682
366460160
INTAKE PIPE
CYCLONE CLAMP (CY- 1) 45
CYCLONE CLAMP (CY- 1) 38
UNDER SEALING FORM
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 25
CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
47
45
48
46
46
48
36-4
36-3
36-2
71-1
71-2
71-3
36-1
36
36-7
36-9
36-8
66
122
72
41
77
42-1
74
76
51
36-5
42-2
42-3
58
54-1
54-2
32-1
32-1
40
43-2
43-1
34
75
52
31
39 37
53
49
38
23
NEW
62
35
73
STYLE
62
CLUTCH
121
33
62
54-2
54-1
OLD
STYLE
CLUTCH
24
25-2
44
23
1
25-1
49
56
29
4
17
16
26
57
5
9
28
14
90
2
62
11
10
12
3
62
55
61
55
7
58
52
53
6
19
101
15
13
63
64
54-2
20
50
54-1
21
PAGE 26 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY. (continued)
NO.
41
PART NO.
366460150
001220851
030208200
031108160
001210815
030208200
368217760
368217750
366460140
366345980
050200060
009110040
368119470
368119480
022910260
366460170
001520820
031108160
009110038
368217770
009110039
022910250
368119490
366461050
033910220
009110038
366900032
001220620
030206150
031106100
020306050
959006120
368461280
2067550101
959021810
454010020
368347270
368010010
912210012
PART NAME
SIDE SEALING FORM
BOLT 8X55 T
QTY.
1
2
2
2
2
2
1
1
2
2
2
4
1
1
2
2
4
4
2
1
4
4
1
12
4
REMARKS
42-1
42-2
42-3
43-1
43-2
44
45
46
47
48
49
50
51
52
WASHER, LOCK M8
WASHER, FLAT M8
BOLT 8X15 H
WASHER, LOCK M8
BOTTOM CLEANER COVER 60
TOP CLEANER COVER 60
RUBBER BUSH 10X16X17
CLEANER COVER KNOB
O- RING P6
FLANGE BOLT 8X20
LINK GUARD
MUFFLER GUARD
WELL NUT M8
FLANGE COLLAR 8
SOCKET HEAD BOLT 8X20 T
WASHER, FLAT M8
SOCKET HEAD BOLT 8X30 ZN
EX BAR
SOCKET HEAD BOLT 6X25 ZN
WELL NUT M6
53
54-1
54-2
55
56
57
58
61
62
63
64
66
71-1
71-2
71-3
72
73
74
75
76
ENGINE GUARD
COLLAR / GUARD
WASHER 8.4X15.5X1.6
SOCKET HEAD BOLT 8X30 ZN
LEVER ASSY W/ T. WIRE............................................ 1 ........INCLUDES ITEMS W/@
4
BOLT 6X20 T
2
2
2
2
1
1
2
1
3
1
1
1
1
WASHER, LOCK M6
WASHER, FLAT M6
NUT M6
CLIP (TCP2 - 10509B)
WIRE HARNESS
CLAMP COMPL
SPIRAL TUBE KEP6 / L=500
CLAMP TC- 100
CRANK GEAR
77
90
101
121
FRONT COVER
ENGINE ASSY, GX100UKRBF
THROTTLE WIRE
122@ 956100062
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 27
GUIDE CYLINDER ASSY.
GUIDE CYLINDER ASSY.
21
1
2
20
23
3
9
36
22
29
12
8
14
30
25
26
17
18
13
24
29
15
16
9
30
27
28
37
7
32
31
4
6
5-2
34
33
5-1
35
PAGE 28 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
GUIDE CYLINDER ASSY.
GUIDE CYLINDER ASSY.
NO.
1
2
3
4
5-1
5-2
6
7
8
PART NO.
368461210
368459920
368347290
368461160
001121230
030212300
952404790
368461260
368461200
368461270
368347281
368217710
050100800
001521020
001520835
953405270
953405260
368217720
050100850
050101150
002211035
368346180
368347520
368461400
368347530
368461410
001220840
020308060
953405270
953405260
368118970
366460300
953404670
050200800
050101300
PART NAME
PISTON PIN
PISTON PIN PLUG
PISTON ROD
PISTON END
BOLT 12X30 T
WASHER, LOCK M12
WASHER 13306
LOWER STOPPER
BOTTOM STOPPER
MAIN SPRING
QTY.
REMARKS
1
2
1
1
1
1
1
1
1
2
9
12
13
14
15
16
17
18
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
SPRING CYLINDER ............................................ 1 ................REPLACES P/N 368347280
FOOT PLATE
O- RING G- 80
SOCKET HEAD BOLT 15X20 T
SOCKET HEAD BOLT 8X25 T
PLUG 1/4X14 13L
PACKING 1/4 (CU)
CYLINDER GUIDE
O- RING G-85
1
1
4
4
1
1
1
1
1
4
1
1
1
1
1
2
2
1
1
1
1
1
1
1
O- RING G-115
BOLT 10X35 H, SW4
ORANGE BELLOWS
BELLOWS CLAMP131D
BAND GUIDE 131D
BELLOWS CLAMP 149D
BAND GUIDE 149D
BOLT 8X40 T
NUT M8
PLUG 1/4X14 13L
PACKING 1/4 (CU)
PROTECTION SLEEVE
OIL GAUGE ASSY
COPPER PACKING 17X25.5X1
O- RING P- 80
O- RING G-130
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 29
FOOT ASSY.
FOOT ASSY.
2
3
8
2
3
7
1
4
5
PAGE 30 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
FOOT ASSY.
FOOT ASSY.
NO.
1
2
3
4
5
7
8
PART NO.
PART NAME
FOOT ASSY 265W M4B
NYLON NUT M12
WASHER, LOCK M12
SQUARE NECK BOLT 12X65
SQUARE NECK BOLT 12X95
FOOT COVER
QTY.
REMARKS
362910150
022711214
030212300
009110034
009110035
368347460
363343390
1
4
4
2
2
1
1
HANDLEBAR GRIP (FOOT)
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 31
FUEL TANK AND HANDLE ASSY.
FUEL TANK AND HANDLE ASSY.
9
8
11
201
54
51
53
10
56
17
FOR CARBURETORS
WITHOUT PRIMING BULBS
23
55
A
15
16
17
110
B
1
FOR CARBURETORS
WITH PRIMING BULBS
A
3
19
18
13
12-2
12-1
13
12-2
12-1
4-1
4-2
110
1
7
6
14
112
B
12-2
12-1
111
5
43
101
40
41
103
101
21
20
A
43
4-2
4-1
42
102
41
21
42
113
101
104
112
106
1
2-2
NOTES
2-1
ITEM 110, PRIMER PUMP KIT,
FOR USE ON UNITS WITH
S/N T-3424 AND ABOVE
101
1
PAGE 32 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
FUEL TANK AND HANDLE ASSY.
FUEL TANK AND HANDLE ASSY.
NO.
1
2-1
2-2
3
4-1
4-2
5
6
7
8
*
9
10
PART NO.
368347630
001521020
033121009
368119570
001211020
030210250
939010270
030208200
020308060
366010060
366345570
368119460
094010053
001210815
030208200
952401450
031108160
959300770
366459790
366345280
366349420
020305040
030205130
959026122
954406420
009110037
366910030
366217170
091005020
022610505
980010330
955010305
366345620
454010020
954010270
954406420
PART NAME
QTY.
REMARKS
SHOCK ABSORBER W/ PIN
SOCKET HEAD BOLT 10X20 T
TOOTHED LOCK WASHER B M10
HANDLE
2
4
4
1
4
4
1
1
1
1
BOLT 10X20 H
WASHER, LOCK M10
RUBBER STOPPER (70)
WASHER, LOCK M8
NUT M8
TANK CAP STRAP
FUEL TANK CAP ASSY............................................... 1 ........INCLUDES ITEM W/
FUEL TANK 2L
*
1
4
3
3
2
1
1
1
11
PAN HEAD SCREW 4X8
BOLT 8X15 H
WASHER, LOCK M8
WASHER 8.5X22X3
WASHER, FLAT M8
STRAINER #508
FUEL TANK PACKING
FILTER HOLDER.......................................................... 1 ........S/N T-3423 AND BELOW
FILTER HOLDERW/V .................................................. 1 ........S/N T-3424 AND ABOVE
12-1
12-2
13
14
15
16
17
17%
18
19
20
21
23
40
41#
42#
43#
51
53
54
NUT M5
3
3
1
2
2
WASHER, LOCK M5
FUEL HOSE L=70
HOSE BAND 10.5
TAPPING SCREW 5X20
ROLLER ASSY W/ SCREW .........................................1........INCLUDES ITEM W/ #
ROLLER
2
4
4
1
1
1
5
1
4
1
1
1
1
SCREW 5X20
FLANGE NUT M5 H
TACHO & HOUR METER
CURL CORD TP-22
METER FINISHER
CLAMP TC-100
CLIP AB-3N
55
56
101
102
103
104
106
110
HOSE BAND 10.5
16910Z4ES21 FUEL STRAINER
959026103
950014500150M FUEL HOSE 1M
950033606020 VINYL TUBE L260
366900060
FUEL HOSE 5.5X11.5X80
PRIMER PUMP KIT/ NO CARB .................................. 1 ........INCLUDES ITEMS W/%
.................................................................................................S/N T-3424 AND ABOVE
RETURN HOSE 3X6X600............................................ 1 ........S/N T-3424 AND ABOVE
HOSE CLIP 5 ............................................................... 2 ........S/N T-3424 AND ABOVE
SPIRALTUBE 6D-200L ............................................... 1 ........S/N T-3424 AND ABOVE
111% 959028301
112% 954408170
113% 959021814
201
920212910
OPERATION DECAL
1
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 33
COMBINATION LEVER ASSY.
COMBINATION LEVER ASSY.
A
4
7
8
3
7
11
1
13
10
2
BODY
5
14
11
6
12
9
NOTES
OLD STYLE LEVER BODY NO LONGER
AVAILABLE. NEW STYLE ITEMS 1, 2, AND 9
ARE NOT COMPATIBLE WITH OLD STYLE
BODY. IF REPLACEMENT OF ITEMS 1, 2
OR 9 IS REQUIRED, ORDER KIT “A”.
OLD
NEW
STYLE
LEVER
STYLE
LEVER
TO DETERMINE IF COMBINATION LEVER
ASSY IS OLD STYLE OR NEW STYLE, SEE
ITEM 2, LEVER. NEW STYLE LEVER HAS
MOLDED TAB AT BOTTOM.
MOLDED
TAB
PAGE 34 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
COMBINATION LEVER ASSY.
COMBINATION LEVER ASSY.
NO.
PART NO.
PART NAME
QTY. REMARKS
A
366900032
COMB. LEVER ASSY W/ THROTTLE WIRE... 1 ......INCLUDES ITEMS W/ #
..................................................................................REPLACES 366900030
COMB. LEVER ASSY ..................................... 1 ......INCLUDES ITEMS W/@
FUEL COCK .................................................... 1 ......SEE NOTE ON DRAWING
FUEL COCK .................................................... 1 ......NEW STYLE, SEE NOTE ON DRAWING
LEVER ............................................................ 1 ......SEE NOTE ON DRAWING
LEVER ............................................................ 1 ......NEW STYLE, SEE NOTE ON DRAWING
A
1
956200110
366346260
1#@ 366349430
366010180
2
2#@ 366010310
3#@ 366010190
4#@ 366010200
5#@ 366010210
6#@ 366010220
7#@ 020408050
8#@ 959407650
SLIDER
1
1
1
1
2
1
END CAP
WIRE CAP
BOLT AND WASHER SET
NUT M8, H=5
SOCKET HEAD SCREW/TH.WIRE
9
366010260
9#@ 366010320
10# 956100062
STOP SWITCH................................................ 1 ..... SEE NOTE ON DRAWING
STOP SWITCH................................................ 1 ..... NEW STYLE, SEE NOTE ON DRAWING
THROTTLE WIRE
1
4
1
1
1
11#@ 094010051
12#@ 094010052
13#@ 050200150
14#@ 050200110
TAPPING SCREW B1 4X12
TAPPING SCREW B1 4X30
O-RING, P15
O-RING, P11
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 35
HONDA GX100KRBF ENGINE — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
PAGE 36 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
NO.
1
PART NO.
PART NAME
QTY.
REMARKS
12000Z0DV00 BARREL ASSY., CYLINDER ....................................... 1 ........INCLUDES ITEMS W/
*
2
*
3
*
5
12201Z0D305 GUIDE ASSY., EX VALVE (O.S.)
12204Z0D305 GUIDE, INLET VALVE (O.S)
12311Z0D000 COVER, HEAD T
12355Z0D000 COVER COMP A, BREATHER
12365Z0D000 COVER COMP B, BREATHER
15571Z0DV71 VALVE, OIL OUTLET
15572ZM7000 PLATE, STOPPER
15721Z0DV70 TUBE, BREATHER
90014952000 VOLT, FLANGE 6X14 (CT200)
91202KJ9003 OIL SEAL 20X32X6
1
1
1
1
1
1
1
1
6
1
1
1
1
1
6
7
8
9
10
11
12
13
*
93500030050A SCREW 3X5
14
15
16
9805655757
PLUG, SPARK (U16FSR-UB)
15171Z0DV00 PIPE, BREATHER
90008ZM7000 BOLT 4X10
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 37
HONDA GX100KRBF ENGINE — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
PAGE 38 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
NO.
1
3
PART NO.
PART NAME
QTY.
REMARKS
11300Z0D409 COVER ASSY., CRANK CASE .................................... 1 ........INCLUDES ITEMS W/
*
15600ZM7003 OIL FILLER CAP ASSY ............................................... 2 ........INCLUDES ITEMS W/#
4#
15625ZE1003 PACKING, OIL FILLER CAP
16510ZL8000 GOVERNOR ASSY.
16531ZE1000 SLIDER, GOVERNOR
16541Z0D000 SHAFT, GOVERNOR ARM
90121952000 FLANGE BOLT 6x25
90131ZE1000 BOLT, DRAIN PLUG
90451ZE1000 THRUST WASHER 6 MM
90601ZE1000 WASHER, DRAIN PLUG
90602ZE1000 CLIP, GOVERNOR HOLDER
91202KJ9003 OIL SEAL 20x3x6
9410106800
9425108000
9430108200
91001Z0DV01 BEARING, RADIAL BALL 6204
11511Z0DV10 FLANGE JOINT PTO
91231891003 OIL SEAL 6x11x4
2
1
1
1
8
1
1
1
1
1
2
1
2
1
1
1
2
4
2
5
*
9
*
10
11
12
13
14
15
*
*
16
*
17
*
PLAIN WASHER 6 MM
LOCK PIN
KNOCK PIN
18
19
21
23
*
24
26
27
28
9430306100
957010804500 FLANGE BOLT 8x40
934021004000 BOLT WASHER 10x40
KNOCK PIN 6x10
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 39
HONDA GX100KRBF ENGINE — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
3
85.3
6
PAGE 40 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
NO.
3
PART NO.
PART NAME
QTY.
REMARKS
13310Z0DV70 CRANK SHAFT COMP. ............................................... 1 ........INCLUDES ITEM W/
*
6
91001Z0DV01 BEARING, RADIAL BALL
2
*
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 41
HONDA GX100KRBF ENGINE — PISTON/CONN. ROD ASSY.
PISTON AND CONNECTING ROD ASSY.
PAGE 42 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — PISTON/CONN. ROD ASSY.
PISTON AND CONNECTING ROD ASSY.
NO.
1
2
PART NO.
13010Z0D003 RING SET, PISTON
13101Z0D000 PISTON
PART NAME
QTY.
REMARKS
1
1
1
3
13111ZE0000 PISTON PIN
4
4
5
*
6
13200Z0D000 CONNECTING ROD ASSY. ........................ 1 ............INCLUDES ITEM W/
13200Z0D305 CONNECTING ROD ASSY. ........................ 1 ............UNDERSIZE, INCLUDES ITEM W/
*
*
90001ZM7000 CONNECTING ROD BOLT
90551ZE0000 CLIP, PISTON PIN 13MM
2
2
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 43
HONDA GX100KRBF ENGINE — CAMSHAFT ASSY.
CAMSHAFT ASSY.
PAGE 44 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — CAMSHAFT ASSY.
CAMSHAFT ASSY.
NO.
1
2
3
4
5
6
7
PART NO.
PART NAME
QTY.
1
1
1
1
1
2
1
REMARKS
14320Z0D010 PULLEY, COMP., CAMSHAFT
14324Z0D000 SHAFT, CAM PULLEY
14400Z0D003 TIMING BELT (61YU7 G-200)
14431Z0D000 ROCKER ARM, INTAKE VALVE
14441Z0D000 ROCKER ARM, EXHAUST VALVE
14461ZL8000 SHAFT, ROCKER ARM
14711Z0D000 INLET VALVE
8
9
14721Z0D000 EXHAUST VALVE
14751Z0D000 SPRING, VALVE
1
2
10
11
12
13
14
14771ZM3010 RETAINER, VALVE SPRING
90012333000 SCREW, TAPPET ADJUSTING
90206001000 NUT, TAPPET ADJUSTING
91301ZM0V31 O RING 6.8X1.9
2
2
2
1
12209KT7013 SEAL, VALVE STEM
1
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 45
HONDA GX100KRBF ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
PAGE 46 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
NO.
1
PART NO.
PART NAME
QTY.
REMARKS
28400Z0DV03ZA RECOIL STARTER ASSY............................... 1 ........INCLUDES ITEMS W/
*
2
28410Z0DV02ZA CASE COMP., RECOIL *5-3-5
1
1
1
1
1
1
1
1
1
1
1
1
*
3
28421Z0DV02
28422ZG0W02
28433ZG0W02
28441ZW6003
28442ZH8003
28461ZH8003
28462Z0DV02
28467Z0DV02
28468Z0DV02
90003ZH8003
957010600800
REEL, RECOIL STARTER
RATCHET, STARTER
GUIDE, RATCHET
SPRING, FRICTION
SPRING, RECOIL STARTER
STARTER KNOB
ROPE, RECOIL STARTER
PLATE, SIDE
PLATE, SLIDE
*
4
*
5
*
6
*
7
*
8
*
9
*
10
*
11
*
12
*
SET SCREW
BOLT, FLANGE 6X8
13
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 47
HONDA GX100KRBF ENGINE — FAN COVER ASSY.
FAN COVER ASSY.
PAGE 48 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — FAN COVER ASSY.
FAN COVER ASSY.
NO.
1
3
PART NO.
19610Z0DV00ZB FAN COVER CP.
90014952000 BOLT, FLANGE 6X14 (CT200)
PART NAME
QTY.
1
4
REMARKS
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 49
HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3423 AND BELOW)
CARBURETOR ASSY. (S/N T-3423 AND BELOW)
33
38
37
17
16
11
10
36
18
2
9
35
15
31
19
20
38
34
24
32
21
4
28
5
26
12 7
29
30
1
6
31
23
25
3
27
8
14
13
40
39
42
25
40
PAGE 50 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3423 AND BELOW)
CARBURETOR ASSY. (S/N T-3423 AND BELOW)
NO.
PART NO.
PART NAME
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
2
REMARKS
1
16010Z0DV02 GASKET, METALING DIAPHRAGM
16011Z0DV02 GASKET, PUMP
16013Z0DV02 DIAPHRAGM ASSY, METALING
16014Z0DV02 DIAPHRAGM, PUMP
16018ZM3004 SCREEN, INLET
16019ZM3004 VALVE, INLET NEEDLE
16022ZM3014 PIN, METALING LEVER
16023Z0DV02 LEVER, METALING
16030ZM3004 SPRING, PUMP
16040Z0DV02 COVER, PUMP
*
2
3
*
*
4
5
*
*
6
7
*
*
8
9
*
*
10
*
11
16041Z0DV02 SCREW
16042Z0EV92 SPRING
16043Z0DV02 COVER, METALING DIAPHRAGM
16044Z0DV02 SCREW
*
12
*
13
*
14
*
15
16045Z0DV02 STOPPER, THROTTLE LEVER
16046Z0DV73 LEVER, THROTTLE
16054Z0DV02 SCREW, VALVE
16048Z0DV02 SPACER, THROTTLE LEVER
16049Z4ES12 SCREW, IDLE ADJUSTING
16050Z0DV02 SPRING
16051Z0DV02 VALVE, THROTTLE
16052Z0DV02 SHAFT, THROTTLE
16053Z0DV02 CLIP, THROTTLE SHAFT
16054Z0DV02 SCREW, VALVE
16055Z0DV02 SCREW ASSY
16056Z0DV02 SPRING
16057Z0DV02 BALL
16058Z0DV72 SHAFT ASSY, CHOKE
16059Z0DV03 VALVE, CHOKE
16060Z0DV02 SCREW
*
16
*
17
*
18
*
19
*
20
*
21
*
22
23
*
*
24
*
25
*
26
*
27
*
28
*
29
*
30
*
31
16061Z0DV02 SEAL, DUST
16100Z4ES13 CARBURETOR ASSY. (HAD 201C)............................ 1 ........INCLUDES ITEMS W/
*
32
*
33
34
35
36
37
38
39
40
42
16211Z0DV00 INSULATOR, CARBURETOR
16212Z0DV00 PACKING, INSULATOR
16213Z4ES10 INSULATOR B, CARBURETOR
16214Z0DV00 PACKING B, INSULATOR
16215Z0DV00 PLATE, INSULATOR
16221Z0DV00 PACKING, CARBURETOR
950014527050 HOSE, FUEL 4.5 X 270
950024085008 CLAMP, TUBE
1
1
1
1
1
2
1
2
1
16552896650 COLLAR, LEVER
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 51
HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3424 AND ABOVE)
CARBURETOR ASSY.(S/NT-3424 AND ABOVE)
PAGE 52 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3424 AND ABOVE)
CARBURETOR ASSY.(S/NT-3424 AND ABOVE)
NO.
PART NO.
PART NAME
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
REMARKS
1
16010Z0DV02 GASKET, METERING DIAPHRAGM
16011Z0DV02 GASKET, PUMP
16013Z4ES32 DIAPHRAGM ASSY, METERING
16014Z0DV02 DIAPHRAGM, PUMP
16018ZM3004 SCREEN, INLET
16019ZM3004 VALVE, INLET NEEDLE
16022ZM3014 PIN, METERING LEVER
16023Z0DV02 LEVER, METERING
16030ZM3004 SPRING, PUMP
16040Z4E802 COVER, PUMP
16041Z0DV02 SCREW
*
2
3
4
5
6
7
8
9
*
*
*
*
*
*
*
*
10
11
*
*
12
*
16042Z0DV02 SPRING
16044Z4E802 SCREW
14
*
15
16045Z0DV02 STOP,THROTTLE
16046Z0DV73 LEVER,THROTTLE
16048Z0DV02 SPACER, THROTTLE LEVER
16049Z4ES12 SCREW, IDLE ADJUSTING
16050Z0DV02 SPRING
16051Z0DV02 VALVE,THROTTLE
16052Z0DV02 SHAFT, THROTTLE
16053Z0DV02 CLIP,THROTTLE SHAFT
16054Z0DV02 SCREW,VALVE
16055Z0DV02 SCREW ASSY
16056Z0DV02 SPRING
*
16
*
17
*
18
*
19
*
20
*
21
*
22
*
23
*
24
*
25
*
26
*
16057Z0DV02 BALL
27
16058Z0DV02 SHAFT ASSY, CHOKE
16059Z0DV03 VALVE, CHOKE
16060Z0DV02 SCREW
16061Z0DV02 SEAL, DUST
16100Z4ES43 CARBURETOR ASSY (W/PRIMER).................................. 1 .........INCLUDES ITEMSW/
*
28
*
29
*
30
*
2
31
*
32
33
34
35
36
37
38
39
40
41
16211Z0DV00 INSULATOR, CARBURETOR
16212Z0DV00 PACKING, INSULATOR
16213Z4ES10 INSULATOR B, CARBURETOR
16214Z0DV00 PACKING B, INSULATOR
16215Z0DV00 PLATE, INSULATOR
1
1
1
1
1
2
1
1
2
1
1
1
1
1
1
1
1
4
16221Z0DV00 PACKING, CARBURETOR
16552896650
COLLAR, LEVER
*
950014527050 HOSE, FUEL 4.5 X 270
950024085008 CLAMP,TUBE
99101Z0D048 JET (#48)
99101Z0D050 JET (#50)
99101Z0D052 JET (#52)
*
41
*
41
*
41
99101Z0D054 JET (#54)
*
42
44
950033602620 TUBE, VINYL.11 X 13 X 260
16017Z4ES32 BODY ASSY, AIRPURGE
16026Z4ES32 COVER, PRIMER PUMP
16032Z4ES32 PUMP, PRIMER
16055Z4ES32 SCREW ASSY
*
45
*
46
*
47
*
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 53
HONDA GX100KRBF ENGINE — AIR CLEANER ASSY.
AIR CLEANER ASSY.
8
14
10
11
PAGE 54 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — AIR CLEANER ASSY.
AIR CLEANER ASSY.
NO.
8
10
11
14
PART NO.
PART NAME
QTY.
REMARKS
17228Z0DV01 PACKING, AIR CLEANER
90042Z4ES30 STUD BOLT 5X95
1
2
2
1
9405005000
17410Z4ES30 ELBOW, AIR CLEANER
FLANGE NUT 5MM
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 55
HONDA GX100KRBF ENGINE — MUFFLER ASSY.
MUFFLER ASSY.
PAGE 56 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — MUFFLER ASSY.
MUFFLER ASSY.
NO.
1
2
3
4
5
6
PART NO.
PART NAME
QTY.
REMARKS
18310Z0DV20 MUFFLER COMP.
1
1
1
3
2
2
18321Z0DV20 MUFFLER PROTECTOR
18381Z0D000 GASKET, MUFFLER
90014952000 VOLT, FLANGE 6X14 (CT200)
90048Z0DV00 STUD BOLT 5X78
90343ZE6000 NUT, SELF-LOCK 6MM
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 57
HONDA GX100KRBF ENGINE — FLYWHEEL IGNITION ASSY.
FLYWHEEL IGNITION ASSY.
3
7
7
12
4
11
1
10
9
PAGE 58 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — FLYWHEEL IGNITION ASSY.
FLYWHEEL IGNITION ASSY.
NO.
1
3
4
7
9
10
11
PART NO.
PART NAME
QTY.
REMARKS
13331ZM7000 WOODRUFF KEY 25X18
30564ZA5000 GROMMET, CORD
31110Z0D003 FLYWHEEL COMP.
90022888010 FLANGE BOLT 6X20
1
1
1
2
1
1
9405012000
28451Z0DV02 STARTER PULLEY
30500Z0DV02 IGNITION COIL ASSY ................................................. 1 ........INCLUDES ITEMS W/
FLANGE NUT M12
*
12
30700Z0DV01 TERMINAL ASSY.
1
*
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 59
HONDA GX100KRBF ENGINE — CONTROL ASSY.
CONTROL ASSY.
3
17
5
20
11
15
10
19
4
9
12
20
6
11
8
8
PAGE 60 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — CONTROL ASSY.
CONTROL ASSY.
NO.
3
4
PART NO.
PART NAME
QTY.
REMARKS
16555Z0DV00 GOVERNOR ROD
16561Z0DV00 GOVERNOR SPRING
16562Z0DV00 SPRING, THROTTLE RETURN
16594883010 HOLDER, WIRE
1
1
1
1
2
1
1
1
1
1
1
5
6
*
8
9
90014952000 VOLT, FLANGE 6X14 (CT200)
90015ZE5010 BOLT, GOVERNOR ARM
90605230000 CIR CLIP
92301050200A BOLT 5X20
93500040060H SCREW 4X6
9405006000
16550Z0DV01 GOVERNOR ARM
16500Z4ES30 CONTROL ASSY ......................................................... 1 ........INCLUDES ITEMS W/
10
*
11
*
12
*
15
FLANGE NUT 6MM
17
19
*
20
9400105000
NUT M5
2
*
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 61
HONDA GX100KRBF ENGINE — LABELS ASSY.
LABELS ASSY.
PAGE 62 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
HONDA GX100KRBF ENGINE — LABELS ASSY.
LABELS ASSY.
NO.
2
4
6
14
PART NO.
87521Z0DV01 LABEL, TRADE MARK
87528Z0D000 MARK, CHOKE
87601Z4ES30 MARK, TYPE (KRBF)
89216130690 WRENCH, SPARK PLUG
PART NAME
QTY.
REMARKS
1
1
1
1
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 63
TERMS AND CONDITIONS OF SALE — PARTS
5. Parts must be in new and resalable
condition, in the original Multiquip
package (if any), and with Multiquip part
numbers clearly marked.
Multiquip reserves the right to quote and
sell direct to Government agencies, and to
Original Equipment Manufacturer accounts
who use our products as integral parts of their
own products.
PAYMENT TERMS
Terms of payment for parts are net 30 days.
FREIGHT POLICY
6. The following items are not returnable:
All parts orders will be shipped collect or
prepaid with the charges added to the invoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier, and any claim for shortage or damage
must be settled between the consignee and
the carrier.
a. Obsolete parts. (If an item is in the
price book and shows as being
replaced by another item, it is
obsolete.)
SPECIAL EXPEDITING SERVICE
A $35.00 surcharge will be added to the
invoice for special handling including bus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.
b. Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
and other rubber parts) that were
purchased more than six months
prior to the return date.
LIMITATIONS OF SELLER’S LIABILITY
MINIMUM ORDER
Multiquip shall not be liable hereunder for
damages in excess of the purchase price of
the item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for
instructions regarding handling of orders not
meeting this requirement.
c. Any line item with an extended
dealer net price of less than
$5.00.
d. Special order items.
RETURNED GOODS POLICY
e. Electrical components.
f. Paint, chemicals, and lubricants.
g. Decals and paper products.
h. Items purchased in kits.
Return shipments will be accepted and
credit will be allowed, subject to the following
provisions:
LIMITATION OF WARRANTIES
No warranties, express or implied, are
made in connection with the sale of parts or
trade accessories nor as to any engine not
manufactured by Multiquip. Such warranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes nor
authorizes any person to assume for it
any other obligation or liability whatever in
connection with the sale of its products. Apart
from such written statement of warranty,
there are no warranties, express, implied or
statutory, which extend beyond the description
of the products on the face hereof.
1. A Returned Material Authorization
must be approved by Multiquip prior to
shipment.
7. The sender will be notified of any material
received that is not acceptable.
8. Such material will be held for five
working days from notification, pending
instructions. If a reply is not received
within five days, the material will be
returned to the sender at his expense.
2. To obtain a Return Material Authorization,
a list must be provided to Multiquip
Parts Sales that defines item numbers,
quantities, and descriptions of the items
to be returned.
9. Credit on returned parts will be issued
at dealer net price at time of the original
purchase, less a 15% restocking
charge.
a. The parts numbers and descriptions
must match the current parts price
list.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
based on the list price that was effective
twelve months prior to the RMA date.
c. The list must state the reason(s)
for the return.
Effective: February 22, 2006
d. The list must reference the sales
order(s) or invoice(s) under
which the items were originally
purchased.
11. Credit issued will be applied to future
purchases only.
PRICING AND REBATES
e. The list must include the name
and phone number of the person
requesting the RMA.
Prices are subject to change without prior
notice. Price changes are effective on a
specific date and all orders received on or
after that date will be billed at the revised price.
Rebates for price declines and added charges
for price increases will not be made for stock
on hand at the time of any price change.
3. AcopyoftheReturnMaterialAuthorization
must accompany the return shipment.
4. Freight is at the sender’s expense. All
parts must be returned freight prepaid to
Multiquip’s designated receiving point.
PAGE 64 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)
NOTES
MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 65
OPERATION AND PARTS MANUAL
HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
UNITED STATES
Multiquip Corporate Office
MQ Parts Department
18910 Wilmington Ave.
Carson, CA 90746
Contact: mq@multiquip.com
Tel. (800) 421-1244
Fax (800) 537-3927
800-427-1244
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
Mayco Parts
Warranty Department
800-306-2926
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
800-421-1244, Ext. 279
310-537-3700, Ext. 279
Fax: 310-537-1173
Fax: 310-631-5032
Service Department
Technical Assistance
800-421-1244
310-537-3700
Fax: 310-537-4259
800-478-1244
MEXICO
UNITED KINGDOM
MQ Cipsa
Multiquip (UK) Limited Head Office
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla 72760 Mexico
Contact: pmastretta@cipsa.com.mx
Tel: (52) 222-225-9900
Fax: (52) 222-285-0420
Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223
Global Lane,
Dukinfield, Cheshire SK16 4UJ
Contact: sales@multiquip.co.uk
Fax: 0161 339 3226
CANADA
Multiquip
4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: jmartin@multiquip.com
Tel: (450) 625-2244
Tel: (877) 963-4411
Fax: (450) 625-8664
© COPYRIGHT 2010, MULTIQUIP INC.
Multiquip Inc, the MQ logo and the Mikasa logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks
are the property of their respective owners and used with permission.
This manual MUST accompany the equipment at all times.This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
|
Motorola Battery Charger Wpln4113 User Manual
Newair Airpura I 600 User Manual
Panasonic Cs E22jkk User Manual
Rinnai 556faiii User Manual
Samsung Ch44cax User Manual
Sinclair Smf C09ai User Manual
Soleus Air Sa 550 User Manual
Summer Infant 2174 User Manual
Toshiba Air Conditioner Rav Sm1106bt E User Manual
Xerox Workcentre 7120 User Manual