Lexmark 3400 Series User Manual

3400 Series All-In-One  
User's Guide  
February 2006  
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.  
All other trademarks are the property of their respective owners.  
© 2006 Lexmark International, Inc.  
All rights reserved.  
740 West New Circle Road  
Lexington, Kentucky 40550  
Contents  
3
4
5
6
8
Finding information about the printer  
Setup sheet  
Description  
Where to find  
The Setup sheet gives you instructions for setting up  
hardware and software.  
You can find this document in the printer box or on the  
Lexmark Web site.  
Getting Started booklet  
Description  
Where to find  
This booklet tells you everything you need to know to get started You can find this document in the printer box.  
using the printer.  
User's Guide  
Description  
Where to find  
The User's Guide gives you instructions for using the  
When you install the printer software, the User's Guide  
printer and other information such as:  
will be installed.  
Maintenance  
Troubleshooting  
Safety  
1 Click Start Œ Programs or All Programs Œ  
Lexmark 3400 Series.  
2 Click User's Guide.  
To install to your desktop:  
1 Insert the CD.  
The installation screen appears.  
Note: If necessary, click Start Œ Run, and then type  
D:\setup, where D is the letter of your CD-ROM  
drive.  
2 Click View User's Guide (including Setup  
Troubleshooting).  
3 Click Yes.  
4 Click Cancel.  
5 Click Yes.  
An icon of the User's Guide desktop, and the User's  
Guide appears on the screen.  
You can also find this document on the Lexmark Web  
site.  
CD  
Description  
Where to find  
The CD contains drivers, software, and publication files. You can find this CD in the printer box. See the Setup  
The CD installs the Help system on your computer if your sheet for installation instructions.  
printer connects to a computer.  
9
     
Help  
Description  
Where to find  
The Help gives you instructions for using the software if  
your printer connects to a computer.  
While in any Lexmark software program, click Help,  
Tips Œ Help, or Help Œ Help Topics.  
Lexmark Solution Center  
Description  
Where to find  
The Lexmark Solution Center software is included on To access the Lexmark Solution Center:  
your CD if your printer connects to a computer. It installs  
with the other software.  
1 Click Start Œ Programs or All Programs Œ  
Lexmark 3400 Series.  
2 Select Lexmark Solution Center.  
Readme file  
Description  
Where to find  
This file contains late-breaking information about the  
printer and software that does not appear in other  
documentation, as well as information specific to your  
operating system.  
To access the Readme file:  
1 Click Start Œ Programs or All Programs Œ  
Lexmark 3400 Series.  
2 Select Readme.  
Web site  
Description  
Where to find  
Our Web site contains a variety of information.  
Visit our Web site at www.lexmark.com.  
1 Go to the Web site.  
Note: All paths for the Web site are subject to change.  
2 Select a country or region from the drop-down list in  
the upper-left corner of the page.  
3 Select the link for the information you need.  
Drivers, updates, and patches  
Visit our Web site at www.lexmark.com.  
1 Click drivers & downloads.  
2 Click Find Drivers and Downloads.  
3 Select your printer family.  
This area gives you updated driver files.  
4 Select your printer model.  
5 Select your operating system, or click Show files for  
all supported Operating Systems.  
6 Select the file you want to download, and follow the  
directions.  
Product specifications  
Visit our Web site at www.lexmark.com.  
1 Click Products & Supplies.  
2 Click Printers & Multifunction Products.  
3 Select your printer family.  
The product specifications give you information such as  
how many pages you can put in the paper tray and  
which cartridges to use with your printer.  
4 Select your printer model.  
5 Click the Tech Specs tab.  
10  
 
Description  
Where to find  
KnowledgeBase  
Visit our Web site at www.lexmark.com.  
1 Click customer support.  
The KnowledgeBase is a searchable database that  
gives you information such as troubleshooting your  
printer and printing ideas.  
2 Click Technical Support.  
3 Select your printer family.  
4 Select your printer model.  
5 Type a term to search, or click one of the links.  
Customer care  
Visit our Web site at www.lexmark.com.  
1 Click customer support.  
This area gives you access to technical support,  
publications, warranty status, drivers and downloads,  
and rebates and promotions; tells you how to find a  
retail location near you, contact a sales representative,  
register your printer, and check order status; and gives  
information about parts, service providers, and safety.  
2 Select the link for the information you need.  
Ordering supplies  
Visit our Web site at www.lexmark.com.  
1 Click Products & Supplies.  
You can order supplies such as cartridges and paper  
from our Web site.  
2 Click Supplies.  
3 Select the link for the information you need.  
Limited Warranty information  
To view the limitations and conditions of this limited  
warranty, see the Statement of Limited Warranty included  
with this unit or set forth at www.lexmark.com.  
Lexmark International, Inc. furnishes a limited warranty  
that this printer will be free of defects in material and  
workmanship for a period of 12 months after the original  
date of purchase.  
1 Click customer support.  
2 Click Warranty Information.  
3 Click Statement of Limited Warranty for Inkjet &  
All-In-One Printers.  
4 Scroll through the Web page to view the warranty.  
Customer support  
Description  
Where to find  
Telephone support  
Call us at (800) 332-4120.  
Monday–Friday (8:00 AM–11:00 PM EST)  
Saturday (Noon–6:00 PM EST)  
Note: Phone number and support times may change without  
notice.  
E-mail support  
For e-mail support, visit our Web site: www.lexmark.com.  
1 Click customer support.  
2 Click Technical Support.  
3 Select your printer family.  
4 Select your printer model.  
5 From the Support Tools section, click e-Mail Support.  
6 Complete the form, and then click Submit Request.  
11  
Description  
Where to find  
Record the following information (located on the store receipt and the back of the printer), and have it ready when  
you contact us so that we may serve you faster:  
Machine Type number  
Serial number  
Date purchased  
Store where purchased  
Web site  
Description  
Where to find  
Our Web site contains a variety of information.  
Visit our Web site at www.lexmark.com.  
1 Go to the Web site.  
Note: All paths for the Web site are subject to  
change.  
2 Select a country or region from the drop-down list in the  
upper-left corner of the page.  
3 Select the link for the information you need.  
Record the following information (located on the store receipt and the back of the printer), and have it ready when  
you contact us so that we may serve you faster:  
Machine Type number  
Serial number  
Date purchased  
Store where purchased  
12  
 
Setting up the printer  
To set up the printer, follow the instructions on the Setup sheet that came with the product.  
Checking the box contents  
1
?
?
?
2
5
4
3
Name  
Description  
Color print cartridge  
Power supply cord  
Cartridge to be installed in the printer  
1
2
Attaches to the power supply located at the back of  
the printer  
3
4
Installation software CD  
Installation software for the printer  
Help  
User's Guide in electronic format  
Getting Started or Setup Solutions  
Printed booklet that serves as a guide  
Note: The complete version of the User's Guide can  
be found on the installation software CD that shipped  
with the printer.  
5
Setup sheet  
Instructions on setting up printer hardware and  
software, and information on setup troubleshooting  
Note: USB cable sold separately  
13  
   
Learning about the printer  
Understanding the parts of the printer  
1
8
7
9
2
3
4
5
Use the  
To  
Paper support  
PictBridge port  
Memory card slots  
Control panel  
Display  
Load paper.  
1
2
3
4
5
6
7
8
9
Connect a PictBridge-enabled digital camera to the printer.  
Insert a memory card.  
Operate the printer.  
Check the status of the printer.  
Stack paper as it exits.  
Paper exit tray  
Top cover  
Access the scanner glass.  
Keep paper straight when feeding.  
Scan, copy, or remove an item.  
Paper guide  
Scanner glass  
14  
                   
3
1
2
4
5
Use the  
To  
Hold up the scanner unit.  
1
2
3
4
Scanner support  
Print cartridge carrier  
Scanner unit  
Install, replace, or remove a print cartridge.  
Access the print cartridge carrier.  
Power supply  
Connect the printer to a power source using the power cord.  
Note: Insert the power cord into the power supply before you connect  
the power cord to the wall outlet.  
5
USB port  
Connect the printer to a computer using a USB cable (sometimes sold  
separately).  
Note: Insert the USB cable into the USB port before you connect the  
USB cable to the computer.  
Using the control panel buttons and menus  
Using the control panel  
Press  
To  
1
2
Turn the printer on and off.  
Select Copy  
, Scan  
, or Photo Card  
mode.  
(The mode is selected when the light is on.)  
3
Display the menu for the selected mode.  
Select a submenu option that appears on the display.  
15  
               
Press  
or  
To  
Scroll through menu options.  
4
Specify the number of copies to print while in Copy mode.  
5
6
Cancel a copy, scan, or print job.  
Start a copy, scan, or print job.  
Note: Make sure the mode you want is selected.  
Navigating the control panel menus  
1 Press  
2 Press  
3 Press  
repeatedly to select the Copy, Scan, or Photo Card mode. (The mode is selected when the light is on.)  
repeatedly to scroll through the menu items for the selected mode.  
or to scroll through and select the options available for the displayed menu item.  
Using the Copy menu  
1 If necessary, press  
repeatedly until the  
light is on.  
2 Press  
repeatedly until the menu item you want appears.  
3 Press  
or  
to scroll through and select the options available for the displayed menu item.  
4 Press  
to begin copying.  
Menu item  
Copies  
Action  
Specify the number of copies to print.  
Select a color copy or a black-and-white copy.  
Select a print quality.  
Color  
Print Quality  
Darkness  
Paper Size  
Resize  
Lighten or darken the copied image.  
Specify the size of paper loaded in the paper support.  
Enlarge or reduce the size of the copied image.  
Specify the type of paper loaded in the paper support.  
Paper Type  
Using the Photo Card menu  
1 If necessary, press  
repeatedly until the  
light is on, or insert a memory card into the printer. For more  
2 Press  
repeatedly until the menu item you want appears.  
3 Press  
or  
to scroll through and select the options available for the displayed menu item.  
4 Press  
to begin printing.  
16  
           
Menu item  
Action  
Print Proof Sheet  
Print a proof sheet:  
for all photos on the memory card  
for the most recent 20 photos  
by date  
Scan Proof Sheet  
Print DPOF  
Scan the proof sheet to print selected photos.  
Print photos directly from a memory card.  
Note: This menu selection appears only if a valid DPOF file is present on  
the memory card.  
Print All  
Print all photos on the memory card using the available paper size options.  
17  
Learning about the software  
Using the printer software  
Use this software  
To  
The Imaging Studio  
Open the component necessary for you to complete a task.  
The All-In-One Center Preview, scan, copy, print, or fax images.  
The Solution Center  
Print Properties  
The Photo Editor  
Fast Pics  
Find troubleshooting, maintenance, and cartridge ordering information.  
Select the best print settings for the document you are printing.  
Edit photos and graphics.  
Transfer digital photos from a memory card or a PictBridge-enabled digital camera to the  
computer.  
The Web Toolbar  
Create printer-friendly versions of an active Web page.  
Using the Imaging Studio  
The Imaging Studio buttons link to software and information that help you with the following tasks:  
Printing, browsing, or sharing photos  
Using photos from a memory card  
Printing an album page  
Scanning and editing text using OCR  
Scanning, copying, or faxing  
Finding our Web site  
Finding tips on using the software  
Finding maintenance and troubleshooting information  
To open the Imaging Studio, use one of these methods:  
Method 1  
Method 2  
From the desktop, double-click the Imaging Studio  
icon.  
1 Click Start Œ Programs or All Programs Œ Lexmark  
3400 Series.  
2 Select Imaging Studio.  
Click the Imaging Studio button for the task you want to complete.  
Click  
To  
Details  
Print photos  
Print common photo sizes from saved images  
on the computer.  
18  
       
Click  
To  
Details  
Share photos  
E-mail images or photos which are stored on  
the computer.  
Use memory card photos  
Browse photos  
Print an album page  
Scan & edit text (OCR)  
Scan  
Save or print photos from an inserted memory  
card.  
View photos saved on the computer.  
Print an album or scrapbook page with various  
photo sizes.  
Use Optical Character Recognition (OCR) to  
scan a document to a word processor so you  
can edit the text.  
Scan a photo or document.  
Copy  
Copy photos or documents.  
Enlarge, reduce, or change other features  
before printing.  
Fax  
Fax a document or an image saved on the  
computer.  
Access the Web  
Visit our Web site.  
Learn more about what you can do with this software.  
Find maintenance and troubleshooting information and tools to keep the printer  
working properly.  
19  
                     
Using the All-In-One Center  
Opening the All-In-One Center  
Use the All-In-One Center software to scan, copy, and fax documents.  
To open the All-In-One Center, use one of these methods:  
Method 1  
Method 2  
From the desktop, double-click the Imaging Studio  
icon, and then click the Scan or Copy button.  
1 Click Start Œ Programs or All Programs Œ Lexmark  
3400 Series.  
2 Select All-In-One Center.  
Using the Scanning & Copying tab  
From here  
You can  
Scan  
Select a program to send a scanned image to.  
Select what type of image is being scanned.  
Select the scan quality.  
Note: Click See More Scan Settings to view all settings.  
Copy  
Select the quantity and color of copies.  
Select a quality setting for copies.  
Select a blank paper size.  
Select the size of the original document.  
Lighten or darken copies.  
Enlarge or reduce copies.  
Note: Click Display Advanced Copy Settings to view all settings.  
20  
         
From here  
You can  
Creative Tasks  
Print  
Repeat an image several times on one page.  
Enlarge or reduce an image.  
Print an image as a multiple-page poster.  
Share  
E-mail an image.  
Fax using your computer modem.  
Save  
Save an image on your computer.  
MagiChop—Save multiple photos.  
Edit  
Edit text found in a scanned document (OCR).  
Modify an image with a photo editor.  
Preview  
Select a region of the previewed image to scan or copy.  
View an image of what will be printed or copied.  
Note: For more information about the Scanning & Copying tab, click Help in the top center of the screen.  
Using the Saved Images tab  
Use the Saved Images tab to perform tasks with images that are saved on the computer.  
From here  
You can  
Preview  
Show or create folders.  
Preview and select images.  
Rename, delete, or edit selected images.  
Open With  
Select where to send the saved images.  
Photo Prints  
Creative Tasks  
Click Next to print selected photos in Fast Pics.  
Print  
Print an album page with various photo sizes.  
Enlarge or reduce an image.  
Print an image as a multiple-page poster.  
Share  
E-mail an image.  
Fax using your computer modem.  
Edit  
Edit text found in a scanned document (OCR).  
Modify an image with a photo editor.  
Note: For more information about the Saved Images tab, click Help in the top center of the screen.  
21  
             
Using the Maintain/Troubleshoot link  
The Maintain/Troubleshoot link provides you with direct links to the Solution Center.  
1 Click Start Œ Programs or All Programs Œ Lexmark 3400 Series.  
2 Select All-In-One Center.  
3 Click Maintain/Troubleshoot.  
4 Select from these topics:  
Maintain or fix quality problems  
Troubleshoot problems  
Device status and ink level  
More printing ideas and how to's  
Contact information  
Advanced  
View the software version and copyright information  
Using the Solution Center  
The Solution Center provides help, as well as information about the printer status and ink level.  
To open the Solution Center, use one of these methods:  
Method 1  
Method 2  
From the desktop, double-click the Imaging Studio  
icon, and then click the Maintain/Troubleshoot button.  
1 Click Start Œ Programs or All Programs Œ  
Lexmark 3400 Series.  
2 Select Solution Center.  
The Solution Center consists of six tabs:  
From this tab  
You can  
Printer Status (Main dialog)  
View the status of the printer. For example, while printing, the  
status of the printer is Busy Printing.  
View the ink level of the print cartridge.  
How To  
Learn how to:  
Print, scan, copy, and fax.  
Find and change settings.  
Use basic features.  
Print projects such as banners, photos, envelopes, cards, iron-on  
transfers, and transparencies.  
Find the electronic guide for more information.  
Troubleshooting  
Learn tips about the current status.  
Solve printer problems.  
22  
           
From this tab  
You can  
Maintenance  
Install a print cartridge.  
Note: Wait until scanning is complete before installing a new print  
cartridge.  
View shopping options for a new cartridge.  
Print a test page.  
Clean to fix horizontal streaks.  
Align to fix blurry edges.  
Troubleshoot other ink problems.  
Contact Information  
Advanced  
Learn how to contact us by telephone or on the World Wide Web.  
Change the appearance of the Printing Status window.  
Turn printing voice notification on or off.  
Change network printing settings.  
Share information with us regarding how you use the printer.  
Obtain software version information.  
Note: For more information, click Help in the lower right corner of the screen.  
Using Print Properties  
Opening Print Properties  
Print Properties is the software that controls the printing function when the printer is connected to a computer. You  
can change the settings in Print Properties based on the type of project you want to create. You can open Print  
Properties from almost any program:  
1 With a document open, click File Œ Print.  
2 From the Print dialog, click Properties, Preferences, Options, or Setup.  
Using the Save Settings menu  
From the “Save Settings” menu, you can name and save the current Print Properties settings for future use. You  
can save up to five custom settings.  
23  
           
Using the I Want To menu  
The “I Want To” menu contains a variety of task wizards (printing a photo, an envelope, a banner, a poster, or printing  
on both sides of the paper) to help you select the correct print settings for a project.  
Using the Options menu  
Use the “Options” menu to make changes to the Quality Options, Layout Options, and Printing Status Options  
settings. For more information on these settings, open the tab dialog from the menu, and then click the Help button  
on the dialog.  
The “Options” menu also provides direct links to different parts of the Solution Center as well as software version  
information.  
Using the Print Properties tabs  
All of the print settings are on the three main tabs of the Print Properties software: Quality/Copies, Paper Setup, and  
Print Layout.  
Tab  
Options  
Quality/Copies  
Select a Quality/Speed setting.  
Select a Paper Type.  
Customize how the printer prints several copies of a single print job:  
collated or normal.  
Choose Automatic Image Sharpening.  
Choose to have the last page printed first.  
Paper Setup  
Print Layout  
Specify the size of paper loaded.  
Select the orientation of the document on the printed page: portrait or  
landscape.  
Select the layout you want to print.  
Choose to print on both sides of the paper, and select a duplexing  
preference.  
Note: For more information about these settings, right-click a setting on the screen, and then select What's This?  
Using the Photo Editor  
Use the Photo Editor software to edit graphics or photos.  
1 Click Start Œ Programs or All Programs Œ Lexmark 3400 Series.  
2 Select Photo Editor.  
3 Click File Œ Open to select the image you want to edit.  
4 Edit the image with the available tools.  
Notes:  
You can edit only one image at a time.  
Move the mouse pointer over the tool for a description.  
To undo or redo changes, click the corresponding arrow next to Undo in the top center of the screen. You  
can reverse multiple changes.  
24  
             
5 Click File Œ Save as.  
6 Enter a file name and file type, and then click Save.  
From this section  
You can  
Quick Fixes  
Remove the red-eye effect caused by light reflection.  
Fix the photo with one click.  
Colorize the image using antiquing or sepia tones.  
Crop the image.  
Rotate the image.  
Flip the image.  
Image Adjust  
Adjust the color depth.  
Adjust the color balance.  
Colorize the image.  
Adjust the Brightness/Contrast.  
Adjust the blur.  
Adjust the sharpness.  
Despeckle (blur) the image to remove dust and scratches.  
Adjust the exposure.  
Balance color groupings.  
Image Size  
Change the units of measurement.  
Resize the image.  
Crop the image.  
Drawing Tools  
Select an area by dragging a box around it. Use this for text box placement  
and cutting and copying areas.  
Add text.  
Fill pixels with color.  
Draw with a pencil tool.  
Draw with a line tool.  
Erase areas.  
Paint areas with a paintbrush tool.  
Pick up a color using the eyedropper.  
Using the Web Toolbar  
The Lexmark Web Toolbar lets you create printer-friendly Web pages.  
Note: The Lexmark Web Toolbar launches automatically when you browse the Web using Microsoft Windows  
Internet Explorer version 5.5 or later.  
25  
 
Click  
To  
Select Page Setup options.  
Select Options to customize the toolbar appearance or select a different setting  
for printing photos.  
Access links to the Lexmark Web site.  
Access Help for additional information.  
Uninstall the Web Toolbar.  
Normal  
Quick  
Print an entire Web page in normal quality.  
Print an entire Web page in draft quality.  
Print only the text of a Web page.  
Text Only  
Photo  
Print only the photos or images on a Web page.  
Note: The number of photos or images valid for printing appears next to Photos.  
Preview  
Preview a Web page before printing.  
Using Fast Pics  
Use the Fast Pics software to save or print photos from a digital camera memory card.  
To open Fast Pics, insert a digital camera memory card into the printer. For more information, see “Inserting a  
With Fast Pics, you can:  
Print photos using a computer. For more information, see “Printing photos stored on a memory card using Fast  
Save photos from a memory card to the computer. For more information, see “Transferring digital photos to a  
26  
 
Loading paper and original documents  
Loading paper  
1 Make sure:  
You use paper designed for inkjet printers.  
If you are using photo, glossy, or heavyweight matte paper, you load it with the glossy or printable side facing  
you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)  
The paper is not used or damaged.  
If you are using specialty paper, you follow the instructions that came with it.  
You do not force paper into the printer.  
2 Before loading paper the first time, squeeze and slide the paper guide to the left side of the paper support.  
3 Load the paper vertically against the right side of the paper support.  
4 Adjust the paper guide until it rests against the left edge of the paper.  
Note: To avoid paper jams, make sure the paper does not buckle when you adjust the paper guide.  
Loading various paper types  
Load up to  
Make sure  
100 sheets of plain paper  
The paper is designed for use with inkjet printers.  
The paper is loaded against the right side of the paper support.  
The paper guide rests against the left edge of the paper.  
100 sheets of heavyweight matte paper  
25 sheets of photo paper  
The glossy or printable side of the paper faces you. (If you are not  
sure which side is the printable side, see the instructions that came  
with the paper.)  
25 sheets of glossy paper  
The paper is loaded against the right side of the paper support.  
The paper guide rests against the left edge of the paper.  
Note: Photos require more drying time. Remove each photo as it exits,  
and allow it to dry to avoid ink smudging.  
27  
           
Load up to  
Make sure  
10 iron-on transfers  
You follow the loading instructions that came with the iron-on  
transfers.  
The print side of the transfers faces you.  
The transfers are loaded against the right side of the paper support.  
The paper guide rests against the left edge of the transfers.  
Note: For best results, load transfers one at a time.  
25 greeting cards  
25 index cards  
25 photo cards  
25 postcards  
The print side of the cards faces you.  
The cards are loaded against the right side of the paper support.  
The paper guide rests against the left edge of the cards.  
Note: Photo cards require more drying time. Remove each photo card  
as it exits, and allow it to dry to avoid ink smudging.  
10 envelopes  
The print side of the envelopes faces you.  
The stamp location is in the upper left corner.  
The envelopes are designed for use with inkjet printers.  
The envelopes are loaded against the right side of the paper support.  
The paper guide rests against the left edge of the envelopes.  
Warning: Do not use envelopes that have metal clasps, string ties, or  
metal folding bars.  
Notes:  
Do not load envelopes with holes, perforations, cutouts, or deep  
embossing.  
Do not use envelopes that have exposed flap adhesive.  
Envelopes require more drying time. Remove each envelope as it  
exits, and allow it to dry to avoid ink smudging.  
28  
           
Load up to  
Make sure  
25 sheets of labels  
The print side of the labels faces you.  
The top of the labels feeds into the printer first.  
The adhesive on the labels does not extend to within 1 mm of the  
edge of the label.  
You use full label sheets. Partial sheets (with areas exposed by  
missing labels) may cause labels to peel off during printing, resulting  
in a paper jam.  
The labels are loaded against the right side of the paper support.  
The paper guide rests against the left edge of the labels.  
Note: Labels require more drying time. Remove each sheet of labels as  
it exits, and allow it to dry to avoid ink smudging.  
50 transparencies  
The rough side of the transparencies faces you.  
If the transparencies have a removable strip, each strip faces away  
from you and down toward the printer.  
The transparencies are loaded against the right side of the paper  
support.  
The paper guide rests against the left edge of the transparencies.  
Notes:  
Transparencies with paper backing sheets are not recommended.  
Transparencies require more drying time. Remove each  
transparency as it exits, and allow it to dry to avoid ink smudging.  
100 sheets of custom-size paper  
The print side of the paper faces you.  
The paper size fits within these dimensions:  
Width:  
76–216 mm  
3.0–8.5 inches  
Length:  
127–432 mm  
5.0–17.0 inches  
The paper is loaded against the right side of the paper support.  
The paper guide rests against the left edge of the paper.  
29  
     
Load up to  
Make sure  
20 sheets of banner paper  
You remove all the paper from the paper support before loading the  
banner paper.  
You tear off only the number of pages needed to print the banner.  
You place the required stack of banner paper on the top cover.  
The leading edge of the banner paper feeds into the printer first.  
The paper is loaded against the right side of the paper support.  
The paper guide rests against the left edge of the paper.  
You have selected the correct paper size for the banner in Print  
Properties. For more information, see “Using Print Properties” on  
Loading original documents on the scanner glass  
You can copy, scan, and print photos, text documents, magazine articles, newspapers, and other publications. You  
can also scan a document for faxing.  
1 Make sure the printer is on.  
2 Open the top cover.  
3 Place the original document facedown on the scanner glass in the lower right corner.  
4 Close the top cover to avoid dark edges on the scanned image.  
30  
     
Printing  
Changing the paper type  
If you print using specialty paper, such as photo paper, cards, envelopes, transparencies, or iron-on transfers, you  
need to change the paper type setting from the Print dialog box.  
1 Load paper.  
2 With a document open, click File Œ Print.  
3 From the Print dialog, click Properties, Preferences, Options, or Setup.  
4 From the Paper Type section, select the paper type that matches the type of paper you are loading.  
5 Click OK.  
6 Click OK or Print.  
Printing a document  
1 Load paper.  
2 With a document open, click File Œ Print.  
3 Click Properties, Preferences, Options, or Setup.  
4 Adjust the settings.  
5 Click OK.  
6 Click OK or Print.  
Printing a Web page  
Printing the text and photos from a Web page  
1 Load paper.  
2 With the Web page open, click File Œ Page Setup.  
The Page Setup dialog appears.  
3 Adjust the print settings for the Web page.  
4 Click OK.  
5 From the Web Toolbar, select a print option: Normal, Quick, or Black and White.  
Printing only the text from a Web page  
1 Load paper.  
2 With the Web page open, click File Œ Page Setup.  
The Page Setup dialog appears.  
3 Adjust the print settings for the Web page.  
31  
           
4 Click OK.  
5 From the Web Toolbar, select Text Only.  
Printing photos or images from a Web page  
1 Load paper. For best results, use photo or heavyweight matte paper, with the glossy or printable side facing  
you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)  
2 Open a Web page with Microsoft Internet Explorer 5.5 or later.  
On the Lexmark Web Toolbar, the number of photos valid for printing appears next to Photos.  
3 If no number appears next to Photos:  
a From the Lexmark logo drop-down menu, select Options.  
b Select the Advanced tab.  
c Select a lower minimum photo size.  
d Click OK.  
The number of photos valid for printing appears next to Photos.  
4 Click Photos.  
The Fast Pics dialog appears.  
5 If you want to print all the photos or images using the same settings, select the size you want, the blank paper  
size in the printer, and the number of copies.  
6 If you want to print one photo or image at a time:  
a Click the photos or images you do not want to print to deselect them.  
b To make common editing changes:  
1 Right click the photo or image.  
2 Click Edit.  
3 Make your selections.  
4 Follow the instructions on the screen.  
5 When you are finished making changes, click Done.  
6 Select the size you want, the blank paper size in the printer, and the number of copies.  
7 Click Print Now.  
Printing cards  
1 Load greeting cards, index cards, or postcards.  
2 From the software application, click File Œ Print.  
3 Click Properties, Preferences, Options, or Setup.  
4 Select a Quality/Speed setting.  
Select Photo for photos and greeting cards and Normal for other types of cards.  
5 From the Paper Type section, select Use my choice.  
6 From the drop-down list, select Card Stock.  
32  
   
7 Select the Paper Setup tab.  
8 Select Paper.  
9 From the Paper Size list, select a card size.  
10 Click OK.  
11 Click OK or Print.  
Notes:  
To avoid paper jams, do not force the cards into the printer.  
To prevent smudging, remove each card as it exits, and let it dry before stacking.  
Printing envelopes  
1 Load envelopes.  
2 From the software application, click File Œ Print.  
3 Click Properties, Preferences, Options, or Setup.  
4 From the “I Want To” menu, select Print on an envelope.  
5 From the Envelope Size list, select the envelope size loaded.  
6 Select Portrait or Landscape orientation.  
Notes:  
Most envelopes use landscape orientation.  
Make sure the same orientation is also selected in the software application.  
7 Click OK.  
8 Click OK.  
9 Click OK or Print.  
Printing transparencies  
1 Load transparencies.  
2 With a document open, click File Œ Print.  
3 Click Properties, Preferences, Options, or Setup.  
4 From the Paper Type section, select Use my choice.  
5 From the drop-down list, select Transparency.  
6 Click OK.  
7 Click OK or Print.  
Note: To prevent smudging, remove each transparency as it exits, and let it dry before stacking. Transparencies  
may require up to 15 minutes to dry.  
33  
   
Printing collated copies  
If you print multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies  
as groups of pages (not collated).  
Collated  
Not collated  
1 Load paper.  
2 With a document open, click File Œ Print.  
3 Click Properties, Preferences, Options, or Setup.  
4 From the Quality/Copies tab, select the number of copies to print.  
5 Select the Collate Copies check box.  
6 Select the Print Last Page First check box.  
7 Click OK.  
8 Click OK or Print.  
Printing multiple pages on one sheet  
1 Load paper.  
2 With a document open, click File Œ Print.  
3 Click Properties, Preferences, Options, or Setup.  
4 From the Print Layout tab, select N-up.  
5 Select the number of pages to print on each page.  
6 If you want each page image to be surrounded by a border, select Print Page Borders.  
34  
   
7 Click OK.  
8 Click OK or Print.  
Printing the last page first (reverse page order)  
1 Load paper.  
2 With a document open, click File Œ Print.  
3 Click Properties, Preferences, Options, or Setup.  
4 From the Quality/Copies tab, select Print Last Page First.  
5 Click OK.  
6 Click OK or Print.  
35  
 
Working with photos  
Retrieving and managing photos  
Inserting a memory card  
1 Insert a memory card.  
Insert the card with the brand name label facing to the left.  
If there is an arrow on the card, make sure it points toward the printer.  
1
2
Slot Memory card  
1
xD Picture Card  
Secure Digital  
Mini Secure Digital (with adapter)  
Note: Make sure you connect the memory card to the adapter that came with it before inserting it  
into the slot.  
MultiMedia  
Memory Stick  
Memory Stick PRO  
Memory Stick Duo (with adapter) or Memory Stick PRO Duo (with adapter)  
Note: Make sure you connect the memory card to the adapter that came with it before inserting it  
into the slot.  
2
Compact Flash Type I and Type II  
Microdrive  
2 Wait for the light on the printer to come on. The light blinks to indicate the memory card is being read or is  
transmitting data.  
Warning: Do not remove the memory card while the light is blinking.  
If the printer does not read the memory card, remove and reinsert it.  
For more information, see “Memory card troubleshooting” on page 70.  
36  
     
Note: The printer reads only one memory device at a time.  
Using a PictBridge-enabled digital camera to control printing photos  
Connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and print  
photos.  
1 Insert one end of the USB cable into the camera.  
Note: Use only the USB cable that came with the digital camera.  
2 Insert the other end of the cable into the PictBridge port on the front of the printer.  
Notes:  
Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, see  
the camera documentation.  
The printer reads only one media device at a time.  
If the PictBridge connection is successful, the following appears on the display: PictBridge camera  
detected. Press to change settings.If any other message appears, see “Error messages” on  
3 Follow the instructions in the camera documentation to select and print photos.  
Transferring digital photos to a computer  
1 Make sure the printer is connected to a computer, and both the printer and computer are on.  
2 Insert a memory card. For more information, see “Inserting a memory card” on page 36.  
The Fast Pics dialog appears on the computer screen.  
3 Click Save Photos to PC.  
The light on the printer blinks to indicate the memory card is transmitting data to the computer.  
4 Follow the instructions on the computer screen to specify where you want to save the images.  
Browsing and selecting photos stored on the computer  
1 Click Start Œ Programs or All Programs Œ Lexmark 3400 Series.  
2 Select Imaging Studio.  
37  
     
3 Click Browse Photos.  
4 Click Show Folders.  
5 Select the folder where the photos are stored.  
6 Close the folder directory.  
7 Select the photos you want to print by clicking each photo.  
Printing photos  
Printing photos stored on a memory card using the proof sheet  
1 Load paper.  
2 Insert a memory card. For more information, see “Inserting a memory card” on page 36.  
Print Proof Sheetappears on the display.  
3 Press  
or  
to specify the type of proof sheet to print.  
You can print a proof sheet:  
For all photos on the memory card  
For the 20 most recent photos  
By date  
4 Press  
.
Please insert letter or A4 paper and press  
appears on the display.  
5 Press  
again.  
The proof sheet prints.  
6 Follow the instructions on the proof sheet to select which photos to print, and to choose a layout, print option,  
and paper type to use.  
Note: When making selections, make sure you completely fill in the circles.  
7 Load the proof sheet facedown on the scanner glass. For more information, see “Loading original documents  
8 If necessary, press  
9 Press  
Load the correct paper and press  
repeatedly until Scan Proof Sheetappears.  
.
to continueappears.  
Note: Make sure the size of the paper you loaded in the printer matches the paper size you selected in step 2  
of the proof sheet.  
10 Press  
again.  
Warning: Do not remove the memory card, or turn off the printer, until the photos you selected in the photo proof  
sheet have been printed. The proof sheet becomes invalid when the memory card is removed from the printer, or  
anytime the printer is turned off.  
Note: You can print up to 25 proof sheets at a time.  
38  
   
Printing photos stored on a memory card using Fast Pics  
1 Load paper. For best results, use photo or glossy paper with the glossy or printable side facing you. (If you are  
not sure which side is the printable side, see the instructions that came with the paper.)  
2 Insert a memory card. For more information, see “Inserting a memory card” on page 36.  
The Fast Pics dialog appears.  
3 Click View and Print Photos.  
4 From the dialog that appears, click the white box on each photo that you want to print.  
5 Select the size for each photo, the blank paper size in the printer, and the number of copies.  
6 Click Print Now.  
Printing photos from a digital camera using DPOF  
Digital Print Order Format (DPOF) is a feature available on some digital cameras. If your camera supports DPOF,  
you can specify which photos to print, and how many of each, while the memory card is still in the camera. The  
printer recognizes these settings when you insert the memory card into the printer.  
Note: Make sure the size of the paper loaded is not smaller than the size you specified in the DPOF selection.  
1 Load paper. For best results, use photo or glossy paper, with the glossy or printable side of the paper facing  
you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)  
2 Insert a memory card. For more information, see “Inserting a memory card” on page 36.  
3 Press  
until Print DPOFappears.  
4 Press  
.
Make sure the correct paper size is loaded in the printer.  
5 Press  
again to begin printing.  
Printing photos stored on the computer using the Imaging Studio  
1 Load photo or heavyweight matte paper, with the glossy or printable side facing you. (If you are not sure which  
side is the printable side, see the instructions that came with the paper.)  
2 From the desktop, double-click the Imaging Studio icon.  
3 Click Print Album Page.  
4 Click Show Folders.  
5 From the directory in the right panel, select the folder where your photos are stored.  
6 Close the directory in the right panel.  
7 Click Change the category of layouts listed above.  
8 Select Only Borderless.  
9 Click OK.  
10 From the Paper Size drop-down menu on the “Create a page from saved photos” section, select a paper size  
for the photos.  
11 From the Page Layout drop-down menu, select a page layout.  
39  
     
12 Drag your photos onto the page.  
13 Click Print Now.  
Customizing photos  
If you want to edit your photos, see “Using the Photo Editor” on page 24.  
Creating and printing a scrapbook or album page  
1 Load paper. For best results, use photo or heavyweight matte paper, with the glossy or printable side facing  
you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)  
2 From the desktop, double-click the Imaging Studio icon.  
3 Click Print Album Page.  
4 Click Show Folders.  
5 From the directory in the right panel, select the folder where your photos are stored.  
6 Close the directory in the right panel.  
7 From the Paper Size drop-down menu, select a paper size.  
8 From the Page Layout drop-down menu, select a page layout.  
For more options:  
a Click Change the category of layouts listed above.  
b Select a layout for the photos.  
c Click OK.  
d From the Page Layout drop-down menu, select a page layout.  
9 Drag the photos onto the page.  
Note: Right-click the photo on the page for editing options.  
10 Click Print Now.  
Note: To prevent smudging, remove each page as it exits, and let it dry before stacking.  
Adding text captions to a photo page  
1 Load paper. For best results, use photo or heavyweight matte paper, with the glossy or printable side facing  
you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)  
2 From the desktop, double-click the Imaging Studio icon.  
3 Click Print Album Page.  
4 Click Change the category of layouts listed above.  
5 Select Only Scrapbook Pages.  
6 Click OK.  
7 Select a paper size for the photos.  
8 Select a page layout containing a black box.  
9 Drag the photos onto the page.  
40  
     
10 Click inside the white box. A dialog appears.  
11 Enter the text you want.  
12 Click OK.  
13 Click Print Now to print the photo page.  
41  
Copying  
Making a copy  
1 Load paper.  
2 Load an original document facedown on the scanner glass.  
3 If necessary, press  
repeatedly until  
repeatedly until Colorappears on the display.  
or to select Color Copyor Black Copy.  
to begin copying.  
light is on.  
4 Press  
5 Press  
6 Press  
Copying 4 x 6 photos  
1 Load photo paper vertically with the glossy side facing you.  
2 Place a 4 x 6 photo facedown on the scanner glass. For more information, see “Loading original documents on  
3 If necessary, press  
repeatedly until the  
light is on.  
4 Press  
5 Press  
6 Press  
7 Press  
8 Press  
repeatedly until Print Qualityappears on the display.  
repeatedly until Quality:Photoappears.  
repeatedly until Paper Sizeappears.  
repeatedly until Paper:4x6appears.  
repeatedly until Paper Typeappears.  
9 Press  
repeatedly until Photoappears.  
10 Press  
.
42  
     
Customizing copy settings  
You can make one or more selections before copying a document or photo.  
Specifying the size of paper loaded  
1 If necessary, press  
repeatedly until the  
light is on.  
2 Press  
repeatedly until Paper Sizeappears on the display.  
3 Press  
or  
to select the blank paper size that matches the size of the paper loaded in the printer.  
4 Press  
to copy the item.  
Setting the copy quality  
1 If necessary, press  
repeatedly until the  
light is on.  
2 Press  
repeatedly until Print Qualityappears on the display.  
3 Press  
or  
to select the copy quality you want.  
4 Press  
to copy the item.  
Making a copy lighter or darker  
1 Load an original document facedown on the scanner glass.  
2 If necessary, press  
repeatedly until the  
light is on.  
3 Press  
repeatedly until Darknessappears on the display.  
4 Press  
or  
repeatedly to lighten or darken the copy.  
5 Press  
to copy the item.  
Enlarging or reducing an image  
1 Load paper.  
2 Load an original document facedown on the scanner glass.  
3 If necessary, press  
repeatedly until the  
repeatedly until Resizeappears.  
or to select the resizing option you want.  
again until Colorappears.  
light is on.  
4 Press  
5 Press  
6 Press  
7 Press  
or  
to select Color Copyor Black Copy.  
8 Press  
to copy the item.  
43  
         
Repeating an image on one page using the computer  
When copying, you can print the same image multiple times on one sheet of paper. This option is helpful in creating  
labels, decals, flyers, handouts, and so on.  
1 Load paper.  
2 Load an original document facedown on the scanner glass.  
3 Click Start Œ Programs or All Programs Œ Lexmark 3400 Series.  
4 Click All-In-One Center.  
The All-In-One Center appears with the Scanning & Copying tab expanded.  
5 From the Creative Tasks section, click Repeat an image several times on one page.  
6 Follow the instructions on the computer screen.  
44  
 
Scanning  
Scanning an item  
1 Make sure the printer is connected to a computer, and both the printer and the computer are on.  
2 Load an original document facedown on the scanner glass.  
3 If necessary, press  
4 Press  
repeatedly until the  
light is on.  
.
The All-In-One Center appears on the computer screen with a scan preview of the document under the Scanning  
& Copying tab.  
5 If you want to scan only a portion of the document, click and drag the dotted line box to select a specific area of  
the preview image to scan.  
6 From the “Send scanned image to” menu, select a program.  
7 Click Scan Now.  
Scanning a text-only document  
1 Make sure the printer is connected to a computer, and both the printer and the computer are on.  
2 Load an original document facedown on the scanner glass.  
3 If necessary, press  
4 Press  
repeatedly until the  
light is on.  
.
The All-In-One Center appears on the computer screen with a scan preview of the document under the Scanning  
& Copying tab.  
5 If you want to scan only a portion of the document, click and drag the dotted line box to select a specific area of  
the preview image to scan.  
6 From the “What is being scanned?” menu, select Black & White Document.  
45  
     
7 Adjust the settings as needed.  
8 Click Scan Now.  
Scanning a text and graphics document  
1 Make sure the printer is connected to a computer, and both the printer and the computer are on.  
2 Load an original document facedown on the scanner glass.  
3 If necessary, press  
4 Press  
repeatedly until the  
light is on.  
.
The All-In-One Center appears on the computer screen with a scan preview of the document under the Scanning  
& Copying tab.  
5 If you want to scan only a portion of the document, click and drag the dotted line box to select a specific area of  
the preview image to scan.  
6 From the ”What is being scanned?” menu, select Color Document.  
7 Adjust the settings as needed.  
8 Click Scan Now.  
Saving a scanned image  
1 Make sure the printer is connected to a computer, and both the printer and the computer are on.  
2 Load an original document facedown on the scanner glass.  
3 If necessary, press  
4 Press  
repeatedly until the  
light is on.  
.
The All-In-One Center appears on the computer screen with a scan preview of the document under the Scanning  
& Copying tab.  
5 If you want to scan only a portion of the document, click and drag the dotted line box to select a specific area of  
the preview image to scan.  
6 From the “Send scanned image to” menu, select a program.  
7 Adjust the settings as needed.  
8 Click Scan Now.  
9 From the software application, click File Œ Save As.  
10 Enter the file name, format, and location where you want the scanned image saved.  
11 Click Save.  
Customizing scan settings  
1 Make sure the printer is connected to a computer, and both the printer and the computer are on.  
2 Load an original document facedown on the scanner glass.  
3 If necessary, press  
repeatedly until the  
light is on.  
46  
     
4 Press  
.
The All-In-One Center appears on the computer screen with a scan preview of the document under the Scanning  
& Copying tab.  
5 If you want to scan only a portion of the document, click and drag the dotted line box to select a specific area of  
the preview image to scan.  
6 From the “Send scanned image to” menu, select a program.  
7 Click See More Scan Settings.  
8 Select what is being scanned.  
9 Select a scan quality.  
10 If you want to make additional selections:  
a Click Display Advanced Scan Settings.  
b Customize the scan settings.  
c Click OK.  
11 Click Scan Now.  
Advanced Scan Settings tabs Options  
Scan  
Select the color depth.  
Select the scan resolution.  
Select Optical Scan settings.  
Select an auto-crop setting.  
Select an exact area to be scanned.  
Choose to convert the scanned item to text for editing.  
Choose to scan multiple images before output.  
Update the list of programs to send scans.  
Update the default fax driver.  
Image Enhancements  
Image Patterns  
Straighten images after scan (deskew).  
Select whether to sharpen blurry edges.  
Adjust brightness of the image.  
Adjust the color correction curve (gamma) of the image.  
Remove image patterns from magazines or newspapers (descreen).  
Reduce more or less of the background noise (scratches) on the color  
document.  
Note: For more information, click Help at the bottom of the screen.  
Scanning documents or images for e-mailing  
1 Make sure the printer is connected to a computer, and both the printer and the computer are on.  
2 Load an original document facedown on the scanner glass.  
3 From the desktop, double-click the Imaging Studio icon.  
4 Click Share Photos.  
47  
 
5 Click Scan and e-mail a photo.  
The All-In-One Center appears with the Scanning & Copying tab expanded.  
6 Follow the instructions on the computer screen.  
Scanning text for editing  
Use the Optical Character Recognition (OCR) software feature to turn scanned images into text you can edit with a  
word-processing application.  
Note: Make sure that ABBYY Fine Reader is installed.  
1 Load an original document facedown on the scanner glass.  
2 From the desktop, double-click the Imaging Studio icon.  
3 Click Scan & Edit Text (OCR).  
The All-In-One Center appears with the Scanning & Copying tab expanded.  
4 To scan only a portion of the document:  
a Click Preview Now.  
An image of the scanned document appears in the preview section.  
b Click and drag the dotted line box to select a specific area of the preview image to scan.  
Otherwise, continue with step 5.  
5 Select a word-processing program to edit the text.  
6 Click Send Now.  
The document will appear in your text-editing program.  
7 Make your editing changes.  
8 To save the document, click File Œ Save As.  
9 Enter the file name, format, and location where you want the edited document saved.  
10 Click Save.  
Scanning images for editing  
1 From the desktop, double-click the Imaging Studio icon.  
2 Click Scan.  
3 From the “Send scanned image to” menu, select a graphics program to edit the images.  
4 Click Scan Now.  
When the image finishes processing, it opens in the program you selected.  
5 Edit the image using the tools available in the graphics program. For more information, see the documentation  
that came with the graphics program.  
48  
     
Scanning clear images from magazines or newspapers  
Descreening helps to remove wavy patterns from images scanned from magazines or newspapers.  
1 Make sure the printer is connected to a computer, and both the printer and the computer are on.  
2 Load an original document facedown on the scanner glass.  
3 If necessary, press  
4 Press  
repeatedly until the  
light is on.  
.
The All-In-One Center appears on the computer screen with a scan preview of the document under the Scanning  
& Copying tab.  
5 If you want to scan only a portion of the document, click and drag the dotted line box to select a specific area of  
the preview image to scan.  
6 From the “Send scanned image to” menu, select a program.  
7 Click Display Advanced Scan Settings.  
8 Select the Image Patterns tab.  
9 Select the Remove image patterns from magazine/newspaper (descreen) check box.  
10 Select Best Quality or Best Speed.  
11 From the “What was scanned?” menu, select Magazine or Newspaper.  
12 Click OK.  
13 Click Scan Now.  
49  
 
Faxing  
Sending a fax using the software  
1 Make sure:  
The printer is connected to a computer that is equipped with a fax modem.  
The computer is connected to a working phone line.  
Both the printer and the computer are turned on.  
2 Load an original document facedown on the scanner glass.  
3 From the desktop, double-click the Imaging Studio icon.  
4 Click Fax.  
5 Click Scan and send a fax.  
6 Click Preview Now.  
7 Click and drag the dotted line box to select a specific area of the preview image to fax.  
8 Adjust the settings as needed.  
9 Click Next.  
10 Follow the instructions on the computer screen to complete the task.  
Receiving a fax using the software  
1 Make sure:  
The printer is connected to a computer that is equipped with a fax modem.  
The computer is connected to a working phone line.  
Both the printer and the computer are turned on.  
2 From the desktop, double-click the Imaging Studio icon.  
3 Click Fax.  
50  
     
4 Click Receive a fax or view settings/history.  
Note: You can receive faxes only when the fax software is open.  
5 Double-click the fax in the status window to view it.  
6 Click the printer icon to print the fax.  
Note: If you want to print faxes as they arrive, select Print Incoming Faxes.  
51  
Maintaining the printer  
Changing a print cartridge  
Removing a used print cartridge  
1 Make sure the printer is on.  
2 Lift the scanner unit.  
The print cartridge carrier moves and stops at the loading position, unless the printer is busy.  
3 Press down on the lever to raise the cartridge lid.  
4 Remove the used print cartridge.  
Installing a print cartridge  
1 If you are installing a new print cartridge, remove the sticker and tape from the back and bottom of the cartridge.  
Warning: Do not touch the gold contact area on the back or the metal nozzles on the bottom of the cartridge.  
52  
       
2 Press down on the cartridge lever to raise the cartridge lid.  
3 Insert the cartridge.  
4 Close the lid.  
5 Lift the scanner unit, press the scanner support back until it slides into the slot, and close the scanner unit.  
1
3
2
CAUTION: When closing the scanner unit, make sure to keep your hands out from underneath the scanner unit.  
6 Load paper, and press  
to print an alignment page.  
7 Load the printed alignment page on the scanner glass.  
8 Press  
again to align the cartridge.  
Alignment Completeappears on the display.  
If any other message appears, see “Error messages” on page 71.  
Note: The scanner unit must be closed to start a new scan, print, copy, or fax job.  
53  
Achieving better print quality  
Improving print quality  
If you are not satisfied with the print quality of a document, make sure you:  
Use the appropriate paper for the document. Use Lexmark Premium Photo Paper if you are printing photos or  
other high-quality images.  
Make sure the glossy or printable side faces you. (If you are not sure which side is the printable side, see the  
instructions that came with the paper.)  
Use a paper that is a heavier weight or bright white.  
Select a higher print quality.  
If the document still does not have the print quality you want, follow these steps:  
1 Align the print cartridge. For more information, see “Aligning the print cartridge using the computer” on  
If print quality has not improved, continue to step 2.  
2 Clean the print cartridge nozzles. For more information, see “Cleaning the print cartridge nozzles” on  
If print quality has not improved, continue to step 3.  
3 Remove and reinsert the print cartridge. For more information, see “Removing a used print cartridge” on  
If print quality has not improved, continue to step 4.  
4 Wipe the print nozzles and contacts. For more information, see “Wiping the print cartridge nozzles and contacts”  
If print quality is still not satisfactory, replace the print cartridge. For more information, see “Ordering supplies”  
Aligning the print cartridge using the computer  
To improve print quality, align the print cartridge immediately after you install it. For more information, see “Installing  
1 Load paper.  
2 From the desktop, double-click the Imaging Studio icon.  
3 Click the Maintain/Troubleshoot button.  
4 Click Maintenance.  
5 Click Align to fix blurry edges.  
6 Click Print.  
An alignment page prints.  
7 Follow the instructions on the computer screen.  
Cleaning the print cartridge nozzles  
1 Load plain paper.  
2 From the desktop, double-click the Imaging Studio icon.  
54  
             
3 Click the Maintain/Troubleshoot button.  
4 Click Maintenance.  
5 Click Clean to fix horizontal streaks.  
6 Click Print.  
A page prints, forcing ink through the print cartridge nozzles to clean them.  
7 Print the document again to verify that the print quality has improved.  
8 If print quality has not improved, try cleaning the nozzles up to two more times.  
Wiping the print cartridge nozzles and contacts  
1 Remove the print cartridge.  
2 Dampen a clean, lint-free cloth with water.  
3 Gently hold the cloth against the nozzles for about three seconds, and then wipe in the direction shown.  
4 Using another clean section of the cloth, gently hold the cloth against the contacts for about three seconds, and  
then wipe in the direction shown.  
5 With another clean section of the cloth, repeat step 3 and step 4.  
6 Let the nozzles and contacts dry completely.  
7 Reinsert the print cartridge.  
8 Print the document again.  
9 If print quality does not improve, clean the print nozzles. For more information, see “Cleaning the print cartridge  
55  
       
10 Repeat step 9 up to two more times.  
11 If print quality is still not satisfactory, replace the print cartridge.  
Preserving the print cartridge  
Keep a new cartridge in its packaging until you are ready to install it.  
Do not remove a cartridge from the printer except to replace, clean, or store it in an airtight container. The print  
cartridge does not print correctly if left exposed for an extended period of time.  
Cleaning the scanner glass  
1 Dampen a clean, lint-free cloth with water.  
2 Gently wipe the scanner glass clean.  
Note: Make sure all ink or corrective fluid on a document is dry before placing the document on the scanner glass.  
Ordering supplies  
To order supplies or to locate a dealer near you, visit our Web site at www.lexmark.com.  
Notes:  
For best results, use only Lexmark print cartridges.  
For best results when printing photos or other high-quality images, use Lexmark Premium Photo Paper.  
Item  
Part number  
1
Print cartridge  
USB cable  
12A2405  
Lexmark Photo Paper and Premium Photo Paper Varies by country or region  
Using genuine Lexmark print cartridges  
Lexmark printers, print cartridges, and photo paper are designed to perform together for superior print quality.  
If you receive an Out of Original Lexmark Inkmessage, the original Lexmark ink in the indicated cartridge  
(s) has been depleted.  
If you believe you purchased a new, genuine Lexmark print cartridge, but the Out of Original Lexmark Ink  
message appears:  
1 Click Learn More on the message.  
2 Click Report a non-Lexmark print cartridge.  
To prevent the message from appearing again for the indicated cartridge(s):  
Replace your cartridge(s) with new Lexmark print cartridge(s).  
If you are printing from a computer, click Learn more on the message, select the check box, and click Close.  
If you are using the printer without a computer, press Cancel.  
Lexmark's warranty does not cover damage caused by non-Lexmark ink or print cartridges.  
56  
       
Refilling a print cartridge  
The warranty does not cover repair of failures or damage caused by a refilled cartridge. Lexmark does not  
recommend use of a refilled cartridge. Refilling a cartridge can affect print quality and may cause damage to the  
printer. For best results, use Lexmark supplies.  
Recycling Lexmark products  
To return Lexmark products to Lexmark for recycling:  
1 Visit our Web site at www.lexmark.com/recycle.  
2 Follow the instructions on the computer screen.  
57  
     
Troubleshooting  
Setup troubleshooting  
Incorrect language appears on the display  
1 Press  
to turn off the printer.  
2 Press and hold  
followed by  
until the display reads Language Reset.  
3 Release the buttons.  
4 Press  
or  
repeatedly until the language you want appears on the display.  
5 Press  
to save.  
Power button is not lit  
1 Disconnect the power cord from the wall outlet, and then from the printer.  
2 Plug the cord all the way into the power supply on the printer.  
2
1
3 Plug the cord into an electrical outlet that other electrical devices have been using.  
4 If the  
light is not on, press  
.
Software does not install  
The following operating systems are supported:  
Windows 98/Me  
Windows 2000  
Windows XP  
58  
         
Check that your computer meets the minimum system requirements listed on the box.  
1 Check the USB cable for any obvious damage.  
2 Firmly plug the rectangular end of the USB cable into the USB port of the computer.  
The USB port is marked with the  
USB symbol.  
3 Firmly plug the square end of the USB cable into the back of the printer.  
1 Turn off and then restart your computer.  
2 Click Cancel on all New Hardware Found screens.  
3 Insert the CD, and then follow the instructions on the computer screen to reinstall the software.  
1 Press  
to turn the printer off.  
2 Disconnect the power cord from the wall outlet.  
3 Gently remove the power supply from the printer.  
4 Reconnect the power supply to the printer.  
5 Plug the power cord into the wall outlet.  
6 Press  
to turn the printer on.  
1 Close all open software applications.  
2 Disable any anti-virus programs.  
3 Double-click the My Computer icon.  
In Windows XP, click Start to access the My Computer icon.  
4 Double-click the CD–ROM drive icon.  
5 If necessary, double-click setup.exe.  
6 Follow the instructions on the computer screen to install the software.  
1 Visit our Web site at www.lexmark.com to check for the latest software.  
2 In all countries or regions except the United States, select your country or region.  
3 Click the links for drivers or downloads.  
4 Select your printer family.  
5 Select your printer model.  
6 Select your operating system.  
7 Select the file you want to download, and then follow the directions on the computer screen.  
Page does not print  
If the  
light blinks, see “Error messages” on page 71.  
If the  
59  
 
Remove and then load paper.  
Check the ink level, and install a new print cartridge if necessary.  
1 Remove the print cartridge.  
2 Make sure the sticker and tape have been removed.  
3 Reinsert the print cartridge.  
Make sure the printer is set as the default printer and is not on hold or paused.  
1 Click:  
In Windows XP Pro: Start Œ Settings Œ Printers and Faxes.  
In Windows XP Home: Start Œ Control Panel Œ Printers and Faxes.  
In Windows 2000: Start Œ Settings Œ Printers.  
In Windows 98/Me: Start Œ Settings Œ Printers.  
2 Double-click the name of your printer.  
3 Click Printer.  
Make sure no check mark appears next to Pause Printing.  
Make sure a check mark does appear next to Set As Default.  
1 Press  
to turn the printer off.  
2 Disconnect the power cord from the wall outlet.  
3 Gently remove the power supply from the printer.  
4 Reconnect the power supply to the printer.  
5 Plug the power cord into the wall outlet.  
6 Press  
to turn the printer on.  
1 Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the  
2 If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest  
software.  
a In all countries or regions except the United States, select your country or region.  
b Click the links for drivers or downloads.  
c Select your printer family.  
60  
d Select your printer model.  
e Select your operating system.  
f Select the file you want to download, and then follow the directions on the computer screen.  
Cannot print from digital camera using PictBridge  
Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital  
camera documentation.  
1 Disconnect the camera.  
2 Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to  
determine whether it is PictBridge-enabled.  
Use only the USB cable that came with the camera.  
Remove the memory card from the printer.  
The printer can only read one media device at a time.  
If an error message appears on the display, see “Error messages” on page 71.  
Print troubleshooting  
Improving print quality  
If you are not satisfied with the print quality of a document, make sure you:  
Use the appropriate paper for the document. Use Lexmark Premium Photo Paper if you are printing photos or  
other high-quality images.  
Make sure the glossy or printable side faces you. (If you are not sure which side is the printable side, see the  
instructions that came with the paper.)  
Use a paper that is a heavier weight or bright white.  
Select a higher print quality.  
If the document still does not have the print quality you want, follow these steps:  
1 Align the print cartridge. For more information, see “Aligning the print cartridge using the computer” on  
If print quality has not improved, continue to step 2.  
2 Clean the print cartridge nozzles. For more information, see “Cleaning the print cartridge nozzles” on page 54.  
If print quality has not improved, continue to step 3.  
3 Remove and reinsert the print cartridge. For more information, see “Removing a used print cartridge” on  
If print quality has not improved, continue to step 4.  
4 Wipe the print cartridge nozzles and contacts. For more information, see “Wiping the print cartridge nozzles and  
If print quality is still not satisfactory, replace the print cartridge. For more information, see “Ordering supplies”  
61  
           
Poor text and graphic quality  
Examples of poor text and graphic quality include:  
Blank pages  
Dark print  
Faded print  
Incorrect colors  
Light and dark bands in print  
Skewed lines  
Smudges  
Streaks  
White lines in print  
Check the ink level, and install a new print cartridge if necessary.  
To avoid ink smudging when you are working with the following media, remove each sheet as it exits, and allow it  
to dry:  
Document with graphics or images  
Photo paper  
Heavy weight matte or glossy paper  
Transparency  
Labels  
Envelopes  
Iron-on transfer  
Note: Transparencies may take up to 15 minutes to dry.  
Use a different brand of paper. Each paper brand accepts ink differently and prints with color variations. Use Lexmark  
Premium Photo Paper if you are printing photos or other high-quality images.  
Use only new, unwrinkled paper.  
1 Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the  
2 If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest  
software.  
a In all countries or regions except the United States, select your country or region.  
b Click the links for drivers and downloads.  
c Select your printer family.  
d Select your printer model.  
e Select your operating system.  
f Select the file you want to download, and follow the directions on the computer screen.  
62  
 
Poor quality at the edges of the page  
Unless you are using the borderless feature, use these minimum print margin settings:  
Left and right margins:  
6.35 mm (0.25 in.) for letter size paper  
3.37 mm (0.133 in.) for all paper sizes except letter  
Top margin: 1.7 mm (0.067 in.)  
Bottom margin: 12.7 mm (0.5 in.)  
Select the Borderless print feature.  
1 From the software application, click File Œ Print.  
2 Click Properties, Preferences, Options, or Setup.  
3 Click Print Layout.  
4 Click Borderless.  
Check that the paper size being used matches the printer setting.  
1 From the software application, click File Œ Print.  
2 Click Properties, Preferences, Options, or Setup.  
3 Click Paper Setup.  
4 Check the paper size.  
Print speed is slow  
Close all applications not in use.  
Try minimizing the number and size of graphics and images in the document.  
Consider purchasing more RAM.  
Remove as many unused fonts as possible from your system.  
1 From the software application, click File Œ Print.  
2 Click Properties, Preferences, Options, or Setup.  
3 Click Quality/Copies.  
4 From the Quality/Speed area, select a lower print quality.  
1 Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the  
2 If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest  
software.  
a In all countries or regions except the United States, select your country or region.  
b Click the links for drivers and downloads.  
c Select your printer family.  
d Select your printer model.  
63  
   
e Select your operating system.  
f Select the file you want to download, and follow the directions on the computer screen.  
Printer does not print or respond  
Partial document or photo prints  
Make sure the document or photo is loaded correctly on the scanner glass.  
Make sure the paper size being used matches the size you selected.  
Copy troubleshooting  
Copier does not respond  
If an error message is displayed, see “Error messages” on page 71.  
If the  
1 Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the  
2 If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest  
software.  
a In all countries or regions except the United States, select your country or region.  
b Click the links for drivers and downloads.  
c Select your printer family.  
d Select your printer model.  
e Select your operating system.  
f Select the file you want to download, and follow the directions on the computer screen.  
Scanner unit does not close  
1 Lift the scanner unit.  
2 Remove any obstruction keeping the scanner unit open.  
3 Lower the scanner unit.  
Poor copy quality  
Examples include:  
Blank pages  
Checkerboard pattern  
Distorted graphics or pictures  
Missing characters  
Faded print  
Dark print  
Skewed lines  
Smudges  
Streaks  
64  
           
Unexpected characters  
White lines in print  
If the  
light blinks, see “Error messages” on page 71.  
Check the ink level, and install a new print cartridge if necessary.  
If the scanner glass is dirty, gently wipe it with a clean, lint-free cloth dampened with water.  
If you are copying or scanning from a newspaper, magazine, or glossy paper, see “Scanning clear images from  
If the quality of the original document is not satisfactory, try using a clearer version of the document or image.  
Place the document facedown on the scanner glass.  
Partial document or photo copies  
Make sure the document or photo is loaded correctly on the scanner glass.  
Make sure the paper size being used matches the size you selected.  
Scan troubleshooting  
Scanner does not respond  
If an error message is displayed, see “Error messages” on page 71.  
If the  
Make sure the printer is set as the default printer and is not on hold or paused.  
1 Click:  
In Windows XP Pro: Start Œ Settings Œ Printers and Faxes.  
In Windows XP Home: Start Œ Control Panel Œ Printers and Faxes.  
In Windows 2000: Start Œ Settings Œ Printers.  
In Windows 98/Me: Start Œ Settings Œ Printers.  
2 Double-click the name of your printer.  
3 Click Printer.  
Make sure no check mark appears next to Pause Printing.  
Make sure a check mark does appear next to Set As Default.  
1 Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the  
2 If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest  
software.  
a In all countries or regions except the United States, select your country or region.  
b Click the links for drivers or downloads.  
c Select your printer family.  
65  
     
d Select your printer model.  
e Select your operating system.  
f Select the file you want to download, and then follow the directions on the computer screen.  
Scan was not successful  
1 Check the USB cable for any obvious damage.  
2 Firmly plug the rectangular end of the USB cable into the USB port of the computer.  
The USB port is marked with the  
USB symbol.  
3 Firmly plug the square end of the USB cable into the back of the printer.  
Turn off and then restart your computer.  
1 Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the  
2 If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest  
software.  
a In all countries or regions except the United States, select your country or region.  
b Click the links for drivers or downloads.  
c Select your printer family.  
d Select your printer model.  
e Select your operating system.  
f Select the file you want to download, and follow the directions on the computer screen.  
Scanning takes too long or freezes the computer  
Close all programs not being used.  
To change the scanning resolution to a lower value:  
1 Click Start Œ Programs or All Programs Œ Lexmark 3400 Series.  
2 Select All-In-One Center.  
3 From the Scan area, click See More Scan Settings.  
4 Click Display Advanced Scan Settings.  
5 From the Select Scan Resolution menu, select a lower number.  
Poor scanned image quality  
If an error message is displayed, see “Error messages” on page 71.  
If the scanner glass is dirty, gently wipe it with a clean, lint-free cloth dampened with water.  
To adjust the quality of a scan:  
1 Make sure the printer is connected to a computer, and both the printer and the computer are on.  
2 Load an original document facedown on the scanner glass.  
3 From the desktop, double-click the Imaging Studio icon.  
66  
     
4 Click Scan.  
The All-In-One Center appears with the Scanning & Copying tab expanded.  
5 From the Select Scan Quality section, select another DPI setting.  
6 Click Scan Now.  
If you are copying or scanning from a newspaper, magazine, or glossy paper, see “Scanning clear images from  
If the quality of the original document is not satisfactory, try using a clearer version of the document or image.  
Place the document facedown on the scanner glass.  
Partial document or photo scans  
Make sure the document or photo is loaded correctly on the scanner glass.  
Make sure the paper size being used matches the size you selected.  
Cannot scan to an application  
1 From the Selected Application Does Not Support Multiple Pages dialog, click Cancel.  
2 From the All-In-One Center Scanning & Copying tab, choose a different application from the “Send scanned  
image to” menu.  
3 Scan the document.  
Fax troubleshooting  
Tips for faxing using the Imaging Studio  
If you are faxing using the Imaging Studio, make sure:  
The printer is connected to a computer that is equipped with a fax modem.  
The computer is connected to a working phone line.  
Both the printer and the computer are turned on.  
For additional help when you are using a fax application, see the documentation that came with the fax application.  
Cannot send or receive a fax  
If an error message appears, follow the instructions on the error message dialog.  
Place a test call to the telephone number to which you want to send a fax to make sure that it is working correctly.  
If the telephone line is being used by another device, wait until the other device is finished before sending a fax.  
Call Waiting can disrupt fax transmissions. Disable this feature before sending or receiving a fax. Call your telephone  
company to obtain the keypad sequence for temporarily disabling Call Waiting.  
67  
         
Cannot print a fax or received fax has poor print quality  
Ask that the sender:  
Check that the quality of the original document is satisfactory.  
Resend the fax. There may have been a problem with the quality of the telephone line connection.  
Increase the fax scan resolution.  
Check the ink level, and install a new cartridge if necessary.  
1 Remove the print cartridge.  
2 Make sure the sticker and tape have been removed.  
3 Reinsert the print cartridge.  
If the  
Check for and clear any paper jams.  
Received fax is blank  
Ask the sender to verify the original document was loaded correctly.  
Jams and misfeeds troubleshooting  
Paper jam in the printer  
To automatically eject the paper:  
1 Press and hold  
.
2 Remove the paper from the paper exit tray.  
To manually remove the paper:  
1 Press  
to turn off the printer.  
2 Firmly grasp the paper, and gently pull it out.  
3 Press  
to turn the printer back on.  
Paper jam in the paper support  
1 Press  
to turn off the printer.  
2 Firmly grasp the paper, and gently pull it out.  
68  
         
3 Press  
to turn the printer back on.  
Paper or specialty media misfeeds  
If paper or specialty media misfeeds or skews, or multiple sheets feed or stick together, try the following solutions.  
Load a smaller amount of paper into the printer.  
Maximum loading amounts per paper type  
Specific loading instructions for supported paper and specialty media  
Load paper with the print side facing you.  
Remove each page as it exits, and let it dry completely before stacking.  
Use only new, unwrinkled paper.  
Adjust the paper guides:  
When using media less than 8.5 inches wide  
Against the left edge of the paper or media, making sure it does not buckle  
Printer does not feed paper, envelopes, or specialty media  
If there is a paper jam, see the appropriate paper jam section.  
Verify that the specialty media is loaded correctly.  
Try loading one page, envelope, or sheet of specialty media at a time.  
Make sure the printer is set as the default printer and is not on hold or paused.  
1 Click:  
For Windows XP Pro: Start Œ Settings Œ Printers and Faxes.  
For Windows XP Home: Start Œ Control Panel Œ Printers and Faxes.  
For Windows 2000: Start Œ Settings Œ Printers.  
For Windows 98/Me: Start Œ Settings Œ Printers.  
2 Double-click the name of your printer.  
3 Click Printer.  
Make sure no check mark appears next to Pause Printing.  
Make sure a check mark does appear next to Set As Default.  
Banner paper jams  
1 Press  
to turn off the printer.  
2 Remove the jammed banner paper from the printer.  
69  
     
To keep a banner print job from jamming:  
Use only the number of sheets needed for the banner.  
Select the following settings to enable the printer to feed paper continuously without jamming:  
1 With a document open, click File Œ Print.  
2 Click Properties, Preferences, Options, or Setup.  
3 Select the Paper Setup tab.  
4 From the Paper Size area, select Banner.  
5 Select Letter Banner or A4 Banner as the paper size.  
6 Select Portrait or Landscape.  
7 Click OK.  
8 Click OK or Print.  
Memory card troubleshooting  
Memory card cannot be inserted  
Make sure that the type of memory card you are using can be used in the printer. See “Inserting a memory card” on  
page 36 to determine which slot accommodates your memory card and to see instructions on how to insert it.  
Nothing happens when a memory card is inserted  
Remove and reinsert the memory card quickly.  
Warning: Do not remove cables or photo storage devices while the light is blinking.  
See “Inserting a memory card” on page 36 to determine which slot accommodates your memory card and to see  
instructions on how to insert it.  
Make sure that the type of memory card you are using can be used in the printer. See “Inserting a memory card” on  
Check that there is no obvious damage to the memory card.  
Insert only one memory card at a time.  
Disconnect the PictBridge-enabled digital camera from the printer.  
Check the cable connections.  
1 Check the USB cable for any obvious damage.  
2 Firmly plug the rectangular end of the USB cable into the USB port of the computer.  
The USB port is marked with the USB symbol  
.
3 Firmly plug the square end of the USB cable into the back of the printer.  
Error messages on display  
If an error message appears, see “Error messages” on page 71.  
70  
       
Error messages  
Alignment problem...  
1 Remove the print cartridge.  
2 Make sure the sticker and tape have been removed.  
3 Reinsert the print cartridge.  
4 Press  
5 Load the alignment page facedown on the scanner glass.  
6 Press again to align the cartridge.  
to print an alignment page.  
Load only plain, unmarked paper for aligning the cartridge.  
The printer will read any markings on used paper, which could cause the alignment error message to appear.  
Cartridge Error  
This includes the following cartridge errors:  
1102  
1203  
1204  
1205  
1206  
120F  
1 Remove the print cartridge.  
2 Disconnect the power cord from the electrical outlet.  
3 Reconnect the power cord to the electrical outlet.  
4 If the  
light is not on, press  
.
5 Reinsert the print cartridge.  
6 If the error:  
Does not reappear, the problem has been corrected.  
Reappears, replace the print cartridge with a new one.  
71  
     
Cartridge missing  
The cartridge is missing or is not installed properly. For more information, see “Installing a print cartridge” on  
Change paper or photo size setting...  
There are one or more photos larger than the paper size you selected.  
1 Press  
to clear the error message.  
2 Press  
again until Paper Sizeappears on the display.  
3 Press  
or  
to select the paper size option that will fit your largest photo size.  
4 Press  
to begin printing.  
Clear the carrier jam...  
1 Raise the scanner unit.  
2 Remove any objects blocking the path of the cartridge carrier.  
3 Make sure the cartridge lid is closed.  
4 Close the scanner unit.  
5 Press  
.
Clear the paper jam...  
Color ink low  
1 Check the ink level, and install a new cartridge if necessary. The low ink warning occurs when the cartridge is  
25% full, 15% full, and 10% full.  
2 Press  
to continue.  
Could not detect a proof sheet  
The document placed on the scanner glass is not a valid proof sheet.  
The memory card may have been removed from the printer, or the photo proof sheet may be loaded incorrectly on  
the scanner glass.  
72  
           
Computer not connected  
Make sure your computer is connected and turned on.  
1 Check the USB cable for any obvious damage.  
2 Firmly plug the rectangular end of the USB cable into the USB port of the computer.  
The USB port is marked with the  
USB symbol.  
3 Firmly plug the square end of the USB cable into the USB port on the back of the printer.  
Insert camera/memory card.  
No PictBridge-enabled digital camera or memory card was detected by the printer.  
Invalid photo/paper size selection  
You have selected more than one option on step 2 of the photo proof sheet you printed and scanned.  
1 Make sure you completely fill in only one circle for each option.  
2 Press  
to continue.  
Load paper...  
1 Load paper.  
2 Press  
.
No images have been selected.  
You have not selected any of the options on step 1 of the photo proof sheet you printed and scanned.  
1 Make sure you completely fill in your selected circle or circles.  
2 Press  
to continue.  
No photo/paper size selection has been made.  
You have not selected any of the options on step 2 of the photo proof sheet you printed and scanned.  
1 Make sure you completely fill in your selected circle or circles.  
2 Press  
to continue.  
No photo files found  
No supported images have been found on the memory card.  
1 Remove the memory card.  
2 Use only memory cards containing photos created in your digital camera using the JPEG format.  
For more information, see the documentation that came with your camera.  
No proof sheet information  
The photo proof sheet you printed and scanned is no longer valid.  
You may have removed the memory card from the printer, or turned off the printer, before scanning the photo proof  
sheet.  
73  
               
Only one device or media card is allowed...  
The printer can read only one memory card at a time.  
1 Remove both memory cards.  
2 Reinsert only one memory card.  
Paper skewed, please reposition.  
The photo proof sheet is placed incorrectly on the scanner glass.  
Change paper size setting...  
There are one or more photos larger than the paper size you selected.  
PictBridge Communications Error  
Make sure your PictBridge-enabled digital camera is inserted correctly into the printer.  
Please remove your camera to use your memory card  
The printer can read either a PictBridge-enabled digital camera or a memory card, not both at the same time.  
1 Remove both the PictBridge-enabled digital camera and the memory card.  
2 Reinsert only one of the devices mentioned above.  
Some photos removed from card by host  
Some of the photos on the photo proof sheet were deleted from the memory card through the computer.  
You need to print a new photo proof sheet.  
There is a problem reading the memory card...  
The memory card was inserted incorrectly or is damaged.  
1 Check for any obvious damage to the memory card.  
2 Reinsert the memory card. See “Inserting a memory card” on page 36 to determine which slot accommodates  
your memory card and to see instructions on how to insert it.  
Removing and reinstalling the software  
If the printer is not functioning properly, or if a communications error message appears when you try to use the  
printer, you may need to remove and reinstall the printer software.  
1 Click Start Œ Programs or All Programs Œ Lexmark 3400 Series.  
2 Select Uninstall.  
3 Follow the instructions on the computer screen to remove the printer software.  
74  
               
4 Restart the computer before reinstalling the printer software.  
5 Click Cancel on all New Hardware Found screens.  
6 Insert the CD, and then follow the instructions on the computer screen to reinstall the software.  
75  
Notices  
Product name Lexmark 3400 Series  
Machine type 4427-001  
4427-A01  
4427-0H1  
4427-AH1  
Trademarks  
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United  
States and/or other countries.  
All other trademarks are the property of their respective owners.  
Conventions  
Note: A note identifies something that could help you.  
CAUTION: A caution identifies something that could cause you harm.  
Warning: A warning identifies something that could damage your product hardware or software.  
Federal Communications Commission (FCC) compliance  
information statement  
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of  
the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including interference that may cause  
undesired operation  
The FCC Class B limits are designed to provide reasonable protection against harmful interference when the  
equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult your point of purchase or service representative for additional suggestions.  
The manufacturer is not responsible for radio or television interference caused by using other than recommended  
cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could  
void the user's authority to operate this equipment.  
Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device,  
use a properly shielded and grounded cable such as Lexmark part number 1021294 for USB attach. Use of a  
substitute cable not properly shielded and grounded may result in a violation of FCC regulations.  
76  
     
Any questions regarding this compliance information statement should be directed to:  
Director of Lexmark Technology & Services  
Lexmark International, Inc.  
740 West New Circle Road  
Lexington, KY 40550  
(859) 232–3000  
Industry Canada compliance statement  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.  
Avis de conformité aux normes de l’industrie du Canada  
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du  
Canada.  
European Community (EC) directives conformity  
This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC  
on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility  
and safety of electrical equipmentdesigned for use within certain voltage limits.  
A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing  
and Technical Support, Lexmark International, Inc., S.A., Boigny, France.  
This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.  
Japanese VCCI notice  
Korean MIC statement  
Noise emission levels  
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.  
Note: Some modes may not apply to your product.  
77  
   
1-meter average sound pressure, dBA  
Printing  
Scanning  
Copying  
Ready  
50  
40  
50  
0
Values are subject to change. See www.lexmark.com for current values.  
Waste from Electrical and Electronic Equipment (WEEE) directive  
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the  
European Union. We encourage the recycling of our products. If you have further questions about recycling options,  
visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.  
ENERGY STAR  
Power consumption  
Product power consumption  
The following table documents the power consumption characteristics of the product.  
Note: Some modes may not apply to your product.  
Mode  
Description  
Power consumption (Watts)  
Printing  
The product is generating hard-copy output from electronic 12.0  
inputs.  
Copying  
The product is generating hard-copy output from hard-copy 11.0  
original documents.  
Scanning  
Ready  
The product is scanning hard-copy documents.  
The product is waiting for a print job.  
6.6  
4.0  
6.0  
Power Saver  
The product is in energy-saving mode.  
78  
 
Mode  
Description  
Power consumption (Watts)  
High Off  
The product is plugged into a wall outlet, but the power switch n/a  
is turned off.  
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is n/a  
turned off, and the product is in the lowest possible power  
consumption mode.  
Off  
The product is plugged into a wall outlet, but the power switch 3.5  
is turned off.  
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous  
power draws may be substantially higher than the average. Values are subject to change. See  
www.lexmark.com for current values.  
Power Saver  
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to  
the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods  
of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of  
time, called the Power Saver Timeout.  
Factory default Power Saver Timeout for this product (in minutes): 30  
Off mode  
If this product has an off mode which still consumes a small amount of power, then to completely stop product power  
consumption, disconnect the power supply cord from the wall outlet.  
Total energy usage  
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided  
in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode  
in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.  
Statement of Limited Warranty  
Lexmark International, Inc., Lexington, KY  
This limited warranty applies to the United States. For customers outside the U.S., see the country-specific warranty  
information that came with your product.  
This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from  
Lexmark or a Lexmark remarketer, referred to in this statement as “Remarketer.”  
Limited warranty  
Lexmark warrants that this product:  
—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts  
—Is, during normal use, free from defects in material and workmanship  
If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair  
or replacement (at Lexmark's option).  
If this product is a feature or option, this statement applies only when that feature or option is used with the product  
for which it was designed. To obtain warranty service, you may be required to present the feature or option with the  
product.  
79  
 
If you transfer this product to another user, warranty service under the terms of this statement is available to that  
user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to  
that user.  
Limited warranty service  
The warranty period starts on the date of original purchase as shown on the purchase receipt. The warranty period  
ends 12 months later.  
To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver  
your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated  
location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the designated  
location.  
When warranty service involves the exchange of a product or part, the item replaced becomes the property of the  
Remarketer or Lexmark. The replacement may be a new or repaired item. The replacement item assumes the  
remaining warranty period of the original product.  
Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair  
not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations,  
restrictions, liens, and encumbrances.  
Before you present this product for warranty service, remove all print cartridges, programs, data, and removable  
storage media (unless directed otherwise by Lexmark).  
For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area,  
contact Lexmark at (800) 332-4120, or on the World Wide Web at www.lexmark.com/support.  
Remote technical support is provided for this product throughout its warranty period. For products no longer covered  
by a Lexmark warranty, technical support may not be available or only be available for a fee.  
Extent of limited warranty  
We do not warrant uninterrupted or error-free operation of any product.  
Warranty service does not include repair of failures caused by:  
—Modification or attachments  
—Accidents or misuse  
—Unsuitable physical or operating environment  
—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer  
—Operation of a product beyond the limit of its duty cycle  
—Use of printing media outside of Lexmark specifications  
—Supplies (such as ink) not furnished by Lexmark  
—Products, components, parts, materials, software, or interfaces not furnished by Lexmark  
TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY  
SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER  
EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED  
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND  
SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW  
ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL  
APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE  
SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.  
80  
Limitation of liability  
Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance  
or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual  
damages up to the limit set forth in the following paragraph.  
Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the  
product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage  
to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE  
LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR  
CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such  
damages. Lexmark is not liable for any claim by you based on a third party claim.  
This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's  
and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers  
are intended beneficiaries of this limitation.  
Additional rights  
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation  
of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.  
This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.  
81  
Index  
carrier jam error 72  
cartridge, print  
aligning 54  
cleaning 54  
installing 52  
preserving 56  
wiping 55  
change paper or photo size setting  
change paper size setting error 74  
cleaning print cartridge nozzles 54  
coated paper, loading 27  
collating copies 34  
scanning text for editing (OCR) 48  
scanning to e-mail 47  
DPOF settings 39  
A
adding text captions 40  
Advanced tab 23  
album page, creating 40  
aligning print cartridge using the  
computer 54  
alignment problem 71  
All-In-One Center  
Maintain/Troubleshoot link 22  
opening 20  
Saved Images tab 21  
Scanning & Copying tab 20  
E
editing  
document text (OCR) 48  
photos 24  
scanned images 48  
enlarging an image 43  
envelopes  
printing 33  
error messages  
alignment problem 71  
carrier jam 72  
B
banner paper jams 69  
banner paper, loading 30  
blank paper size  
option 43  
color ink low 72  
computer not connected error 73  
Contact Information tab 23  
contents, box 13  
control panel 14  
Copy menu 16  
navigating menus 16  
Photo Card menu 16  
copier does not respond 64  
Copy menu 16  
copy options  
making copy lighter or darker 43  
setting quality 43  
specifying size of paper loaded 43  
copy troubleshooting  
copier does not respond 64  
partial document or photo copies 65  
poor copy quality 64  
scanner unit does not close 64  
copying 42  
cartridge missing 72  
change paper or photo size  
change paper size setting 74  
color ink low 72  
computer not connected 73  
could not detect a proof sheet 72  
insert camera/memory card 73  
invalid photo/paper size selection 73  
load paper 73  
no images have been selected 73  
no photo files found 73  
no photo/paper size selection has  
been made 73  
no proof sheet information 73  
only one device or media card  
allowed 74  
paper jam 72  
paper skewed 74  
PictBridge communications error 74  
please remove camera to use memory  
card 74  
problem reading memory card 74  
some photos removed from card by  
host 74  
borderless photos, printing 39  
box contents 13  
Browse photos button 19  
browsing and selecting photos  
from the computer 37  
buttons, control panel  
Cancel 16  
down arrow 16  
Start 16  
up arrow 16  
buttons, Imaging Studio  
Browse photos 19  
Maintain/Troubleshoot 19  
Print album page 19  
Print photos 18  
Scan & edit text (OCR) 19  
Share photos 19  
Use memory card photos 19  
Web site 19  
4x6 photos 42  
cloning an image 44  
enlarging an image 43  
making copy lighter or darker 43  
reducing an image 43  
repeating an image 44  
setting copy quality 43  
specifying size of paper loaded 43  
customizing settings  
copy 43  
error messages on display 70  
F
Fast Pics 26  
C
custom-size paper, loading 29  
Fax button 19  
fax troubleshooting  
cannot print a fax or received fax has  
poor print quality 68  
cannot print from digital camera using  
PictBridge 61  
cannot print a fax or received fax has  
poor print quality 68  
cannot send or receive fax 67  
received fax is blank 68  
faxing  
receiving using the software 50  
sending using the software 50  
using Imaging Studio 67  
D
cannot scan to application 67  
cannot send or receive fax 67  
cards  
printing 32  
documents  
faxing using the software 50  
loading on scanner glass 30  
printing 31  
scanning images for editing 48  
82  
 
FCC notices 76  
finding  
information 9  
publications 9  
orientation, changing  
landscape 24  
portrait 24  
L
labels, loading 29  
landscape orientation, selecting 24  
last page first 35  
load paper error 73  
loading  
P
page does not print 59  
paper exit tray 14  
G
glossy paper, loading 27  
graphics, editing 24  
greeting cards  
loading 28  
paper guide 14  
paper jam error 72  
banner paper 30  
coated paper 27  
custom-size paper 29  
documents on the scanner glass 30  
envelopes 28  
greeting cards 28  
iron-on transfers 28  
photo cards 28  
photo paper 27  
paper jam in paper support 68  
paper jam in printer 68  
paper or specialty media misfeeds 69  
Paper Setup tab  
changing orientation 24  
changing paper size 24  
paper sizes, specifying 24  
paper skewed error 74  
paper support 14  
paper type, changing 31  
paper, loading 27  
partial document or photo copies 65  
partial document or photo prints 64  
partial document or photo scans 67  
parts  
control panel 14  
display 14  
memory card slots 14  
paper exit tray 14  
paper guide 14  
paper support 14  
PictBridge port 14  
power supply 15  
print cartridge carrier 14  
scanner glass 14  
printing 32  
H
How To tab 22  
I
I Want To menu 24  
Imaging Studio buttons  
Browse photos 19  
photos on the scanner glass 30  
postcards 28  
transparencies 29  
Maintain/Troubleshoot 19  
Print album page 19  
Print photos 18  
M
magazine articles, loading on the  
scanner glass 30  
Scan & edit text (OCR) 19  
Share photos 19  
Use memory card photos 19  
Maintain/Troubleshoot  
Maintenance tab 23  
memory card  
inserting 36  
transferring photos from 37  
memory card cannot be inserted 70  
memory card troubleshooting  
error messages on display 70  
memory card cannot be inserted 70  
nothing happens when memory card  
is inserted 70  
Web site 19  
Imaging Studio, using 18  
improving print quality 54, 61  
incorrect language appears on  
index cards  
loading 28  
scanner support 14  
scanner unit 15  
USB port 15  
printing 32  
Photo Card menu 16  
photo cards, loading 28  
Photo Editor, using 24  
photo paper, loading 27  
photos  
adding text captions 40  
album page 40  
browsing and selecting from  
computer 37  
copying 4x6 photos 42  
loading on the scanner glass 30  
printing 39  
printing borderless 39  
printing from a Web page 32  
printing from Imaging Studio 39  
printing from PictBridge-enabled  
digital camera 37  
printing using the proof sheet 38  
scrapbook page 40  
photos removed from card by host 74  
PictBridge communications error 74  
PictBridge port 14  
information, finding 9  
ink level, checking 22  
insert camera/memory card error 73  
inserting  
PictBridge-enabled digital camera 37  
installing  
print cartridge 52  
printer software 74  
invalid photo/paper size selection 73  
iron-on transfers, loading 28  
N
newspapers, loading on the scanner  
no images selected error 73  
no photo files found error 73  
no photo/paper size error 73  
no proof sheet information error 73  
noise emission levels 77  
nothing happens when memory card is  
inserted 70  
J
jams and misfeeds troubleshooting  
banner paper jams 69  
paper jam in paper support 68  
paper jam in printer 68  
paper or specialty media  
misfeeds 69  
notices 76, 77, 78, 79  
N-up feature 34  
O
OCR, editing document text 48  
only one device or media card  
printer does not feed paper,  
envelopes, or specialty media 69  
ordering supplies 56  
83  
PictBridge-enabled camera, printing  
photos from 37  
please remove camera to use memory  
changing paper type 31  
collated copies 34  
document 31  
scan was not successful 66  
scanner does not respond 65  
scanner glass 14  
envelopes 33  
cleaning 56  
poor copy quality 64  
poor quality at the edges of the  
greeting cards 32  
last page first 35  
loading documents 30  
scanner support 14  
scanner unit 15  
poor scanned image quality 66  
poor text and graphic quality 62  
portrait orientation, selecting 24  
postcards  
loading 28  
printing 32  
power button is not lit 58  
power supply 15  
previewing photos  
from the computer 21  
Print album page button 19  
print cartridge  
aligning 54  
cleaning 54  
installing 52  
preserving 56  
removing 52  
wiping 55  
multiple pages on one sheet 34  
photos from PictBridge-enabled digital  
photos from the computer 39  
photos stored on a memory  
photos using Fast Pics 39  
photos using the proof sheet 38  
postcards 32  
scanner unit does not close 64  
scanning  
customizing settings 46  
documents or images for e-  
mailing 47  
editing images 48  
from magazines or newspapers 49  
saving scanned image 46  
text and graphics document 46  
text for editing (OCR) 48  
text-only document 45  
using the control panel 45  
Scanning & Copying tab  
reverse page order 35  
transparencies 33  
using DPOF settings 39  
Web page, photos only 32  
Web page, text and photos 31  
Web page, text only 31  
problem reading memory card  
Creative Tasks section 21  
Preview section 21  
print cartridge carrier 14  
print cartridge nozzles, cleaning 54  
Print Layout tab  
changing document type 24  
duplexing 24  
Print photos button 18  
Print Properties  
I Want To menu 24  
opening 23  
proof sheet, using 38  
publications, finding 9  
scanning takes too long or freezes the  
computer 66  
scrapbook page, creating 40  
setup troubleshooting  
cannot print from digital camera using  
PictBridge 61  
Q
Quality/Copies tab 24  
R
incorrect language appears on  
display 58  
received fax is blank 68  
receiving a fax using the software 50  
recycling  
page does not print 59  
power button is not lit 58  
software does not install 58  
Share photos button 19  
software  
All-In-One Center 20  
Fast Pics 26  
Imaging Studio 18  
Options menu 24  
Paper Setup tab 24  
Print Layout tab 24  
Print Properties tabs 24  
Quality/Copies tab 24  
Save Settings menu 23  
print quality, improving 54, 61  
print speed is slow 63  
print troubleshooting  
improving print quality 61  
partial document or photo prints 64  
poor quality at the edges of the  
poor text and graphic quality 62  
print speed is slow 63  
printer does not print or respond 64  
printer does not feed paper, envelopes,  
or specialty media 69  
printer does not print or respond 64  
printer software  
Lexmark products 57  
WEEE statement 78  
reducing an image 43  
removing print cartridge 52  
repeating an image 44  
reverse page order 35  
Photo Editor 24  
S
Print Properties 23  
removing and reinstalling 74  
Solution Center 22  
Web Toolbar 25  
software does not install 58  
Solution Center  
Advanced tab 23  
Contact Information tab 23  
How To tab 22  
Maintenance tab 23  
Printer Status dialog 22  
Troubleshooting tab 22  
safety information 2  
Saved Images tab  
Preview section 21  
Scan  
Scan & edit text (OCR) button 19  
scan troubleshooting  
cannot scan to application 67  
partial document or photo scans 67  
poor scanned image quality 66  
scan was not successful 66  
scanner does not respond 65  
scanning takes too long or freezes the  
computer 66  
reinstalling 74  
removing 74  
Printer Status dialog 22  
printing  
supplies, ordering 56  
T
borderless photos 39  
text captions, adding 40  
84  
Tips button 19  
top cover 14  
transferring photos to computer 37  
transparencies  
loading 29  
partial document or photo prints 64  
poor quality at the edges of the  
poor text and graphic quality 62  
print speed is slow 63  
printing 33  
Troubleshooting tab 22  
troubleshooting, copy  
copier does not respond 64  
partial document or photo copies 65  
poor copy quality 64  
scanner unit does not close 64  
troubleshooting, error messages  
alignment problem 71  
printer does not print or respond 64  
troubleshooting, scan  
cannot scan to application 67  
partial document or photo scans 67  
poor scanned image quality 66  
scan was not successful 66  
scanner does not respond 65  
scanning takes too long or freezes the  
computer 66  
carrier jam 72  
troubleshooting, setup  
cartridge error 71  
cartridge missing 72  
cannot print from digital camera using  
PictBridge 61  
change paper or photo size  
incorrect language appears on  
change paper size setting 74  
color ink low 72  
page does not print 59  
power button is not lit 58  
software does not install 58  
computer not connected 73  
could not detect a proof sheet 72  
insert camera/memory card 73  
invalid photo/paper size selection 73  
load paper 73  
U
USB port 15  
Use memory card photos button 19  
no images have been selected 73  
no photo files found 73  
no photo/paper size selection has  
been made 73  
no proof sheet information 73  
only one device or media card  
allowed 74  
W
Web page  
printing only the photos 32  
printing only the text 31  
printing text and photos 31  
Web site  
paper jam 72  
paper skewed 74  
finding 10, 12  
PictBridge communications error 74  
please remove camera to use memory  
Web Toolbar  
printing only the photos from a Web  
problem reading memory card 74  
some photos removed from card by  
host 74  
printing only the text from a Web  
printing text and photos from a Web  
troubleshooting, fax  
cannot print a fax or received fax has  
poor print quality 68  
cannot send or receive fax 67  
troubleshooting, jams and misfeeds  
banner paper jams 69  
paper jam in paper support 68  
paper jam in printer 68  
paper or specialty media  
misfeeds 69  
printer does not feed paper,  
envelopes, or specialty media 69  
troubleshooting, memory card  
error messages on display 70  
memory card cannot be inserted 70  
nothing happens when memory card  
is inserted 70  
troubleshooting, print  
improving print quality 61  
85  

Lexmark X 954de User Manual
Philips Scb1225ar User Manual
Raritan Computer 23 422 User Manual
Ricoh Pro 1107ex User Manual
Schumacher Ps 2100ma User Manual
Sharp Af S80rx User Manual
Sonic Alert Blink Receiver Bl300 User Manual
Vtech Baby Accessories 91 002537 005 User Manual
Xantrex Technology Freedom Hf 1000 User Manual
Xerox Workcentre M15 User Manual