INSTRUCTION BOOKLET
WASHING
MACHINE
FJ 1296
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
■
■
It is most important that this instruction book should
be retained with the appliance for future reference.
Should the appliance be sold or transferred to
another owner, or should you move house and leave
the appliance, always ensure that the book is sup-
plied with the appliance in order that the new owner
can get to know the functioning of the appliance and
the relevant warnings.
Only use the advised quantities of fabric softener.
Damage to the fabric can ensue if you over-fill. Refer
to the manufacturer’s recommendations of quantities.
As some duvets and eiderdowns should be washed
in large commercial machines because of their bulk,
please check with the manufacturer of the item be-
fore washing in a domestic machine.
■
■
The users should always check that they have not
left their gas lighters (disposable or otherwise) in their
clothing.
These warnings have been provided in the interest
of safety. You MUST read them carefully before
installing or using the appliance.
Leave the porthole door slightly ajar between washes
to preserve the door seal.
INSTALLATION
■
This appliance is heavy. Care should be taken when
SERVICE/REPAIR
moving it.
■
Under no circumstances should you attempt to repair
■
All packing and transit bolts must be removed before
the machine yourself. Repairs carried out by inexpe-
rienced persons may cause injury or serious malfunc-
tioning. Contact your local Zanussi Service Centre.
Always insist on genuine Zanussi spare parts.
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in instructions.
■
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or com-
petent person.
GENERAL SAFETY
■
It is dangerous to alter the specifications or attempt to
modify this product in any way.
■
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
■
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
■
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
■
Pets and children have been known to climb into
washing machines. Please check your drum before
use.
■
If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely.
■
The glass door becomes very hot during the washing
USE
cycle. Keep children away from the vicinity of the
appliance whilst it is in operation.
■
Always unplug the appliance and turn off the water
after use.
■
When disposing of your old washing machine, the
■
Do not overload the appliance. See relevant section
in instruction book.
electric cable must be cut off and the door catch must
be made unusable.
■
Only wash fabrics which are designed to be machine
washed. If in doubt, consult the care label on the
clothes.
■
Before washing, ensure that all pockets are empty
and buttons and zips are fastened. Avoid washing
frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras
must NOT be machine washed.
■
Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause
extensive damage and must not be placed into the
machine.
■
Garments which have been in contact with volatile
petroleum products should not be machine washed.
If volatile cleaning fluids are used, care should be
taken to ensure that the fluid is removed from the
garment before placing in the machine.
■
Wash small items such as socks, laces, washable
belts etc in a washing bag or pillow case as it is pos-
sible for such items to slip down between the tub and
the inner drum.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Unpacking
Positioning
Before starting the machine up, the packing must be
removed as follows.
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to suitable existing taps with the drain
hose discharging into a sink.
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
Using a spanner unscrew
and remove the rear right
bolt. Lay the machine
gently on its back, making
sure that the hoses are
not squashed.
The appliance has two inlet hoses, hot and cold, with
female 3/4” BSP thread connectors. If this connection is
not compatible with the plumbing of the existing installa-
tion, a variety of connectors are available from good
hardware stores and plumbers merchants to suit most
domestic plumbing. Any alteration to your existing plum-
bing must be carried out by a competent person, or qua-
lified plumber.
P0255
Water inlet
The inlets on the back of the appliance are colour coded,
blue for cold and red for hot.
Before connecting the
hoses be sure to fit the
mesh filters supplied as
per diagram.
2
1
P0234
P0233
Remove the polystyrene block from the bottom of the
machine.
P0003
Carefully slide out the right polythene bag (1), removing
it toward the centre of the machine.
If only a cold water supply is available, connect the two
hoses to a cold water outlet by means of a «Y» connec-
tion piece.
Repeat the operation for the left polythene bag (2),
removing it toward the centre of the machine.
Installation should comply with local water authority and
building regulations’ requirements.
Remove the polystyrene
base, set the machine
upright and unscrew the
two remaining rear bolts.
The appliance must be given a separate cold water sup-
ply and not be connected to a mixer tap, a single outlet
water heater or a booster pump. A minimum water pres-
sure of 7 psi is required for safe operation of the appli-
ance.
If you cannot make the cold water connection direct from
the rising mains, you may be able to operate the appli-
ance from your cold water storage system.
P0256
There should be a minimum distance of 5.02m (161/2 ft)
between the appliance’s inlet and the bottom of the tank.
There will be sufficient pressure for the hot water supply
from the hot water cylinder if the height between the
appliance’s inlet and the bottom of the cold water stor-
age cistern (not between the appliance and hot water
cylinder) is at least 2.74m (9ft).
Set the hoses correctly by
loosening the ring nuts.
After positioning the inlet
hoses, be sure to tighten
the ring nuts again to pre-
vent leaks.
P0001
P0002
Slide out the 3 plastic spacers and plug the 3 holes with
the 3 plastic plugs which you can find at the back of the
machine.
P0021
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
Water drainage
The machine should NOT be placed on deep pile car-
peting.
If you intend the drain hose from the machine to empty
into a sink, make sure that the sink is empty and that the
plug hole is not blocked.
Note
If the machine is permanently plumbed in, hook the end
of the hose into a standpipe installed for the purpose.
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a break-
down.
The standpipe must have an internal diameter of at least
1
2
40 mm (1 / ") in order that there is an air gap between
the drain hose and the standpipe. Make sure, that it is
designed in such a way, that the end of the drain hose
cannot be covered with water.
All plumbing and electrical work required to install this
appliance must be carried out by competent persons or
qualified plumbers or electricians.
In the interest of the environment
3 pin
Washing machines and dishwashers should be connec-
ted to the FOUL drainage system, the water will then be
taken to a sewage works for treatment before being
discharged safely into a river.
Joining piece
40 mm
inside dia min
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
600 mm min
900 mm max
P0376
If you require any further advice please contact your
local authority drainage department.
Important
Before connecting up the machine to new pipework or to
pipework that has not been used for some time, run off a
reasonable amount of water to flush out any debris that
may have collected in the pipes.
Whether discharging into a sink or a standpipe check
that the end of the drain hose is neither too high nor too
low. The top of the curve in the hose’s end should be no
more than 90 cm (35.4”), and no less than 60cm (23.6”)
above floor level.
SHOWER
Levelling
SINK TOILET
Level the washing ma-
chine by raising or low-
ering the feet. The feet
may be tight to adjust as
they incorporate a self
locking nut, but the machi-
ne MUST be level.
BATH
BIDET
WASHING
MACHINE
DISHWASHER
RAINWATER
'RUN-OFF'
Any necessary adjustment
can be made with a span-
ner. Accurate levelling
FOUL DRAIN
P0850
SURFACE WATER
DRAINS & SEWERS
FOUL SEWERS
prevents vibration, noise and displacement of the ma-
chine during operation.
SEWAGE
TREATMENT
WORKS
UNTREATED
DISCHARGE
Some vibration is inevitable, especially if mounted on a
wooden floor.
TREATED
DISCHARGE
RIVER
RIVER
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
P0987
Special conditions
If the floor is carpeted with a deep-pile carpet or covered
with crumbly or soft material, insert a rigid support base
under the feet to prevent noise, vibration or displace-
ment. The base should protrude a few centimetres
beyond the edges of the machine.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connections
WARNING: THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this
safety measure not be observed.
If the plug that is fitted to your appliance is not suitable
for your socket outlet, it must be cut off and the appro-
priate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent
the hazard of shocks in case it should be plugged into a
13 Amp socket in another part of your home.
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
- Earth
- Neutral
- Live
Brown
If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug, pro-
ceed as follows:
GREEN & YELLOW
13 AMP FUSE
BROWN
BLUE
CORD CLAMP
P0329
Connect the green and yellow (earth) wire to the terminal
in the plug which is marked with the letter «E» or the
earth symbol
or coloured green and yellow.
Connect the blue (neutral) wire to the terminal in the plug
which is marked with the letter «N» or coloured black.
Connect the brown (live) wire to the terminal in the plug
which is marked with the letter «L» or coloured red.
The plug moulded on to the lead incorporates a fuse.
For replacement, use a 13 Amp BS1362 fuse. Only
ASTA or BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured insert
at the base of the plug.
A replacement cover/carrier must be obtained from your
local Zanussi Service Centre whose address can be
found in the Customer Care Leaflet accompanying this
manual.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING TO KNOW YOUR MACHINE
Control panel
1 2 0 0
VARIABLE
HEAVY
RINSE
HOLD
SUPER
ECONOMY
QUICK
WASH
ON-OFF
SPIN
SOIL
1
2
3 4 5 6 7
8
9
This prevents any creasing which may take place if the
clothes are left damp in the drum. When it is convenient
for you to empty the machine, simply press this button
again so that the machine can proceed to drain and
spin, or turn the dial to the drain programme "P".
If this button is not activated, the washing programmes
will end with a short spin.
1 Detergent dispenser drawer
Symbols
Prewash
Wash
Fabric softener
Do not press this button for woollens: wool items should
be gently spun.
P0260
5 Quick wash button
By depressing this button on programmes A, B, C and F
the wash time will be reduced by approx. 20 mins.
This is suitable only for garments which are lightly soiled.
2 Spin speed selector dial
Push to release the button.
6 Super Economy button
By depressing this button prior to selecting wash pro-
gramme A you will obtain a reduction of the wash tem-
perature from 95°C to 60°C.
The spin speed can be varied as follows:
Cotton and linen - 1200 (max) to 650 (min) rpm
Synthetics, delicates and wool - 650 (max) to
450 (min) rpm.
The duration of the programme will not alter. This will
ensure a substantial saving in electricity consumption.
It is advisable to use Super Economy when washing
normally soiled fabrics.
NOTE: The spin speeds marked on the dial refer to spin
speeds for cotton and linen programmes. To select 650
rpm spin on synthetic, delicate and wool cycles, the spin
speed selector dial should be positioned to the 1200
(max) setting, to select 450 rpm the dial should be posi-
tioned to the 650 (min) setting.
7 On/Off button
By depressing this button the machine starts operating.
When depressing it again, the machine stops. The push
button is provided with a child-proof safety lock. Move
the small slider placed in the middle of the button down-
wards to lock the button in the «off» position.
3 Heavy soil button
By pressing the heavy soil button, the machine will take
in cold water only on programmes with a water tempera-
ture of 50°-60°-95°C (programmes A-B-F).
These would normally be hot and cold.
8 Mains-on light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
The water is then gradually heated to the required tem-
perature. The effect is to improve the overall wash
performance, particularly on biological stains such as
egg, blood and grass stains, and heavily soiled fabrics,
since the longer «cool-soak» phase as the water heats
up provides the right conditions for the powder and the
water temperature to interact, and achieve the best pos-
sible results.
9 Programme selector dial
With the programme selector dial you choose the de-
sired washing programme. Press this dial to pop it out
and then turn it clockwise.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button.
4 Rinse hold button
Press this button to make the machine stop with water in
the drum after the synthetic or delicate wash cycles.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
■
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found in
most household shops. In some cases it may help to
soak the stain before washing with a special pre-soak
product or biological detergent.
Washing hints
Do NOT overload the machine. Weigh the laundry the
first few times you use the appliance.
The average weights of the most common items are
listed below as a guide:
■
■
Only wool marked «Pure New Wool - washable, pre-
shrunk» can be washed in the machine using the
wool programme; other types of wool should be
washed by hand or dry cleaned.
1000g = 1 kg
Sheet
700-1000 g
100-200 g
400-500 g
50-100 g
Pillow case
Tablecloth
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
Serviette
Tea towel
70-120 g
■
Once you have finished using the machine, you are
advised to unplug it and turn off the water taps.
Linen hand towel
Towelling hand towel
Towelling bath towel
Bath robe
100-150 g
150-250 g
700-1000 g
1000-1500 g
200-300 g
150-200 g
«JETSYSTEM» wash
This appliance is equipped with a wash system called
«JETSYSTEM».
The laundry is always kept damp with water and deter-
gent, using a very efficient pump. In this way water con-
sumption is greatly reduced.
Further savings can be made by washing small loads of
laundry, since the water and electricity consumption is
proportional to the quantity of laundry being washed.
Man’s shirt
Apron
■
Load the laundry loosely alternating large items with
small ones.
As the Jetsystem is flexible and adjusts water intake
according to wash load size it is not possible to give you
exact recommandations as to the amount of detergent
that should be used for any one wash.
■
■
■
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Therefore we recommend that you use approximately
1/3 less than the detergent manufacturer recommends
on the packet or bottle, making the appropriate allow-
ances for soft or hard water, and light or heavy soilage of
clothes. If you have judged the amount correctly you
should expect to see a soft sudsy liquid during the wash.
It is not necessary to have a head of lather on the water.
Avoid washing unhemmed or torn items as they may
unravel.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
■
■
■
When washing curtains, remove the hooks.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
■
When washing fabrics requiring different wash tem-
peratures together, always select the lowest tempera-
ture.
■
■
■
White items should not be washed with coloured
items.
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Use a good quality detergent suitable for automatic
washing machines.
■
■
Use the correct quantities of detergent.
For wool, use gentle detergent only in small quanti-
ties.
■
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
WASH CARE SYMBOLS
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code
is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme
on your washing machine.
WASHING SYMBOL
95
WASH ACTION
FABRIC
White Cotton or Linen
without Special Finishes
Normal (Maximum)
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
Normal (Maximum)
60
50
Nylon, Polyester/Cotton, Viscose with
Special Finishes, Cotton/Acrylic Mix.
Reduced (Medium)
Normal (Maximum)
Reduced (Medium)
Much Reduced (Minimum)
Hand wash only
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
40
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
Wool, wool mixtures, Silks
40
Do not machine wash
BLEACHING
Chlorine bleach may be used
IRONING
Hot iron
Cotten, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Warm iron
Cool iron
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
P
TUMBLE DRYING
May be tumble dried
with high heat setting
with low heat setting
A cross through any symbol means «DO NOT»
X
IMPORTANT NOTES
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
When using liquid detergent and a prewash programme,
place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
Once the dispenser has been filled, close it by pushing it
in gently. This is particularly important if you are using
fabric conditioner to avoid the conditioner entering the
machine prematurely.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmes for cotton and linen
Recommended load: max. 4.5 kg (10 lb)
Compartments
to use ( if
required)
Degree
Programmes
Programme
dial position
Description
of soil
Extra prewash at 40 °C
Short spin
PREWASH
ONLY
Heavy
Q
A
Wash at 95 °C
4 rinses
Spin
BOILWASH
Normal
Wash at 60 °C
4 rinses
Spin
BOILWASH
ECONOMY
Normal
Normal
Normal
A+
Wash at 60 °C
4 rinses
Spin
FAST
COLOUREDS
(*)
B
Wash at 40 °C
4 rinses
Spin
NON-FAST
COLOUREDS
C
D
Spin at 1200 rpm
SPIN 1200
(*) This 60°C programme is the reference programme for the Energy label according to EEC Directive 92/75.
Water filling: 30°-40° programmes: cold water filling
50°-60°-95° programmes: hot and cold filling
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmes for synthetics, delicates and wool
Recommended load: max. 2 kg (4.5 lb); wool max. 1 kg (2.2 lb)
Compartments
Degree
Programme
dial position
Programmes
to use (
if
Description
of soil
required)
Wash at 50 °C
3 rinses
Short spin (*)
MIXED
FABRICS
Normal
F
Wash at 40 °C
3 rinses
Short spin (*)
MIXED
FABRICS
Normal
G
Wash at 40 °C
3 rinses
Short spin (*)
DELICATES/
SYNTHETICS
Normal
Normal
H
J
WOOL
Wash at 40 °C
3 rinses
Short spin (*)
Wash at 30 °C
3 rinses
Short spin (*)
Light
30
WORN ONCE
K
L
3 rinses, with fabric
softener, if required
Short spin (*)
HAND
RINSES
1 rinse, with fabric
softener, if required
Short spin (*)
FRESHEN UP
SPIN 650
DRAIN
M
N
P
Draining of water
and spin at 650 rpm
Draining of water
(*) If the rinse hold button
has not been depressed.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
USE OF DETERGENT AND ADDITIVES
And in which form?
Which detergent?
Not only are there different types of detergent, but
they are also available in different forms. Whether
you chose a powder or liquid in traditional or com-
pact form is to own personal choice.
To ensure you obtain the best wash results from
your appliance, it is important to use the right deter-
gent in your everyday wash, and only detergents
recommended for use in automatic machines.
To maintain the appearance of your clothes and
household textiles and to make them last longer
you should use different types of detergent for dif-
ferent washes, whether for whites, colours or deli-
cates.
Traditional Powders
Pour the powder directly into the dispenser drawer.
Do not sprinkle powder onto clothes in the machine
drum.
Traditional Liquids
Liquid can be placed in the main wash compart-
ment of the detergent drawer marked with the sym-
Whites
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
bol
, start the machine immediately upon plac-
ing the detergent in the dispenser drawer.
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
Non Biological
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
Compact Powders and Liquids
Compact detergents (or concentrates as they are
also known) are available in liquid or powder form,
and generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most eco-
nomical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the
detergent into the specially designed dosing
device* which should be placed on top of the laun-
dry, and at the back of the machine drum.
Coloureds
For coloured items you should use
a detergent which is designed to
clean while maintaining the original
colour.
Ariel Color does not contain bleach
and therefore helps to preserve
colours.
* If you use a dosing device in a washer dryer,
please ensure the dosing device/ball is
removed before carrying out a drying pro-
gramme.
Delicate Items
Fabric Conditioners
These are ideal for improving “softness”, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
When washing delicates such as
woollens, you should use a product
which is specially designed to care
for fine fabrics.
Dreft Automatic is suitable for wool-
lens and other delicates.
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
Laundry Bleach
For additional stain removal you
may wish to use a product such as
Ace Gentle Bleach which is used in
addition to your chosen detergent.
Ace is suitable for all washable fab-
rics including silks, woollens and
coloureds.
marked with the symbol
.
Follow the manufacturer’s dosage
instructions and never exceed the
MAX level.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR MACHINE
WASHING 4.5 KG OF WHITE COTTON AT 95°C
6 Select the required wash programme
Suppose you have 4.5 kg of normally dirty laundry to
wash. It is white cotton and is suitable for high tempera-
ture washing.
Turn the programme
selector dial clockwise to
the required programme.
A
1 Load the laundry
Open the door by pulling
the catch outward. Load
the items one at a time
and close the door.
P0451
7 Start the machine
Before starting up the machine check that:
P0004
■
the appliance is plugged in
■
the water supply taps are turned on
■
the drain hose is correctly and securely positioned
2 Measure out the detergent
■
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF but-
ton: the mains-on light and
door locked light will illumi-
nate and the machine
starts operating.
P0260
P0223
P0414
Pull out the detergent dispenser drawer from the control
panel. Measure out the amount of detergent required
and pour into the main wash compartment.
7 At the end of the programme
If you wish to carry out the extra prewash, pour the
amount of detergent required into the «prewash» com-
partment.
The machine stops automatically.
If you have depressed the rinse hold button, the ma-
chine will stop with the water left in the tub, to prevent
the fabric from creasing. To drain the water release the
same button (the clothes will be gently spun) or select
programme P.
3 Add the fabric softener if required
Pour the fabric softener, if
required, into the compart-
The door is controlled by a safety device which releases
2 minutes after the end of the programme. The door
locked light will go out.
ment marked
.
Do not exceed the MAX
level and then close the
drawer gently.
Switch the machine off by depressing the ON/OFF but-
ton again. The mains-on light will go out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
P0226
4 Select the required options
Depress HEAVY SOIL, QUICK WASH or SUPER
ECONOMY depending on the selected programme.
5 Select the required spin speed
13
Download from Www.Somanuals.com. All Manuals Search And Download.
WASHING 2 KG OF SYNTHETIC FABRICS AT 40°C
6 Select the required wash programme
Suppose you have 2 kg of synthetic fabric laundry to
wash. They are rather delicate fabrics and should not be
washed at a high temperature.
Turn the programme
selector dial clockwise to
the required programme.
H
1 Load the laundry
Open the door by pulling
the catch outward.
Load the items one at a
time and close the door.
P0527
7 Start the machine
Before starting up the machine check that:
P0004
■
the appliance is plugged in
■
the water supply taps are turned on
■
the drain hose is correctly and securely positioned
2 Measure out the detergent
■
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF but-
ton: the mains-on light and
door locked light will illumi-
nate and the machine
starts operating.
P0260
P0223
P0414
Pull out the detergent dispenser drawer from the control
panel. Measure out the amount of detergent required
and pour into the main wash compartment.
8 At the end of the programme
The machine stops automatically.
If you have depressed the rinse hold button, the ma-
chine will stop with the water left in the tub, to prevent
the fabric from creasing. To drain the water release the
same button (the clothes will be gently spun) or select
programme P.
3 Add the fabric softener if required
Pour the fabric softener, if
required, into the compart-
ment marked
.
The door is controlled by a safety device which releases
2 minutes after the end of the programme. The door
locked light will go out.
Do not exceed the MAX
level and then close the
drawer gently.
Switch the machine off by depressing the ON/OFF but-
ton again. The mains-on light will go out.
P0226
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
4 Depress the RINSE HOLD button if re-
quired.
5 Select the required spin speed
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND CLEANING
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the electricity
supply.
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
■
Turn off the water taps.
Descaling
■
Select a wash programme and run for a few sec-
The water we normally use contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
onds.
■
Unscrew the inlet hoses.
■
Unhook the drain hose from the rear support and
position the end in a bowl. Run the draining program-
me for a few seconds.
■
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to pre-
serve the door seal.
External cleaning
Clean the exterior cabinet of the appliance with soap and
water only, and then dry thoroughly.
Cleaning the dispenser drawer
From time to time the washing powder and additive
dispenser drawer should be cleaned.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.
P0224
P0225
Cleaning the drawer recess
Having removed the
drawer, use a small brush
to clean the recess, en-
suring that all washing
powder residue is re-
moved from the upper and
lower part of the recess.
Replace the drawer and
run the rinse programme
for a few minutes without
any clothes in the drum.
P0038
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the filter
The water inlet filters
If your water is very hard or contains traces of lime de-
posit, the water inlet filters may become clogged.
The water drain filter
It is therefore a good idea to clean them from time to
time.
A clean filter is important for the correct functioning of the
machine, and should therefore be cleaned after every
wash.
Turn off the water taps. Unscrew the water inlet hoses.
Remove and clean the fil-
ters using a hard bristle
brush. Replace the filters
and tighten up the inlet
hoses.
Open the filter door and
place a container under-
neath to catch any spill-
age. If the filter is blocked
and the machine is unable
to drain you will need to
drain the water manually
from the machine at this
stage. To do this, unhook
P0041
P0011
the drain hose from the
standpipe or sink and hold the end of the hose over a
bowl on the floor. The water should drain by gravity into
the bowl. When the bowl is full, hook the hose back up
and empty the bowl. Repeat the procedure until water
stops flowing out.
Unscrew and remove the filter.
P0132
P0133
Clean carefully under a
fast running tap.
P0040
Warning
When the appliance is in use and depending on the pro-
gramme selected there can be hot water in the filter.
Never remove the filter during a wash cycle, always wait
until the appliance has finished the cycle, and is empty.
When replacing the filter, ensure it is securely retight-
ened so as to stop leaks and young children being able
to remove it.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICING
If after the above checks, there is still a fault, call
your local Zanussi Service Force Centre.
Before contacting your local ZANUSSI
Service Centre, please make the following
checks:
In-guarantee customers should ensure that the
above checks have been made as the engineer
will make a charge if the fault is not a mechani-
cal or electrical breakdown. Please note that
proof of purchase is required for any in-guaran-
tee service calls.
The machine does not start up
■
The ON/OFF button has not been depressed
■
The door is not closed properly
■
No water is entering the machine (see: the machine
Service & Spare Parts
does not fill)
If you require an engineer or wish to purchase
spare parts contact your local Zanussi Service
Force Centre by telephoning:
■
The selector dial is not correctly positioned
The machine does not fill
■
0990 929929
The water taps are not turned on
■
The water supply has been disconnected
Your telephone call will be routed to the Service
Centre covering your post code area.
■
The inlet hoses are kinked
Further information can be found in the accompa-
nying customer care booklet and also in your tele-
phone directory under “Z”.
When you call the Service Force Centre please
make sure you give the model and serial number of
the appliance.
■
The water pressure is too low
■
The water inlet filters are clogged
■
The door is not closed properly
The machine empties as it fills
■
The end of the drain hose is too low
This information can be
found on the rating
plate (see picture) or on
the guarantee card.
Mod.
..........
Ser.
■
The end of the drain hose is submerged in water
■
Drain pipe has no vent-hole
The machine does not drain or spin
■
You have selected a gentle programme with the rinse
hold option
Mod. ..........
Prod. No. ...........
■
The drain filter is clogged
Ser. No. .........
P0042
■
The drain hose is kinked
Customer Care
■
The drainage system pipes are blocked
For general enquiries concerning your Zanussi
appliance or for further information on Zanussi
products, please contact our Customer Care
Department by letter or telephone as follows:
■
The drain hose extension is incorrect
■
The wash load is unbalanced: redistribute the clothes
inside the drum to allow the machine to spin
Customer Care Department
The machine leaks or overflows
Zanussi
■
Too much detergent
Zanussi House
■
Unsuitable detergent
Hambridge Road - Newbury - Berkshire - RG14 5EP
Tel 01635 521313
■
The inlet hose(s) is (are) loose
■
The detergent dispenser drawer or recess is clogged
■
The end of the drain hose is not securely positioned
■
The drainage system pipes are blocked
The machine vibrates or is noisy
■
The internal packing has not been removed
■
The machine is not level
■
The machine is in contact with the wall or furniture
■
The washing load is badly distributed
■
The machine is overloaded
The door does not open
■
The safety device has locked it
■
Water in the tub: the door cannot be opened if water
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PEACE OF MIND FOR TWELVE MONTHS
Standard guarantee conditions
Exclusions
We, Zanussi Limited undertake that if, within 12 months
of the date of the purchase, this Zanussi appliance or any
part thereof is proved to be defective by reason only of
faulty workmanship or materials, we will, at our option,
repair or replace the same FREE OF ANY CHARGE for
labour, materials or carriage on condition that:
This guarantee does not cover:
■
Damage or calls resulting from transportation, improp-
er use or neglect, the replacement of any light bulbs
or removable parts of glass or plastic.
■
Costs incurred for calls to put right an appliance which
is improperly installed or calls to appliances outside
the United Kingdom.
■
The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
■
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
■
The appliance has been used for normal domestic
purposes only, and in accordance with the manufac-
turer’s instructions.
■
Products of Zanussi manufacture which are NOT
marketed by Zanussi Ltd.
■
The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any person
not authorised by us.
European guarantee
All service work under this guarantee must be undertak-
en by a Zanussi Service Force Centre.
If you should move to another country within Europe then
your guarantee moves with you to your new home sub-
ject to the following qualifications:
Any appliance or defective part replaced shall become
the Company’s property.
The guarantee starts from the date you first pur-
chased your product.
■
This guarantee is in addition to your statutory and other
legal rights.
The guarantee is for the same period and to the
same extent for labour and parts as exists in the new
country of use for this brand or range of products.
■
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
The guarantee relates to you and cannot be trans-
ferred to another user.
■
■
■
Your new home is within the European Community
(EC) or European Free Trade Area.
The product is installed and used in accordance with
our instructions and is only used domestically, i.e. a
normal household.
The product is installed taking into account regula-
tions in your new country.
■
Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look after
you and your appliances.
France
Germany
Italy
Senlis
+33 (0)344 62 29 99
+49 (0)911 323 2600
+39 (0)1678 47053
+46 (0)8 738 79 50
+44 (0)1635 521313
Nurnberg
Pordenone
Stockholm
Newbury
Sweden
UK
18
Download from Www.Somanuals.com. All Manuals Search And Download.
124979662
Z
Download from Www.Somanuals.com. All Manuals Search And Download.
|