Zanussi Washer F 1203 W User Manual

WASHING MACHINE  
F 1203 W  
F
1
2
0
3
W
AQUACYCLE 1200  
C
D
A
MIXED FABRICS  
H
F
AST COLOUREDS  
NON AST COLOUREDS  
ON-OFF  
QUICK  
WASH  
R
I
N
S
E
HALF  
LOAD  
F
WOOL CARE  
DELICATES  
WORN ONCE  
FRESHEN UP  
SHORT SPIN  
DRAIN  
L
M
J
H
O
L
D
WHITES  
+
PREWASH  
WHITES  
HAND RINSES  
LONG SPIN  
B
F
N
K
P
G
GB  
INSTRUCTION BOOKLET  
132991210  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Fo r t he User  
Fo r t he Inst aller  
Im portant Safety Inform ation  
Your New Washing Machine  
2
4
Installation Instructions  
Technical Specifications  
21  
21  
Description of the Appliance  
Detergent dispenser drawer  
Child safety feature  
5
5
5
Unpacking  
Positioning  
Water inlet  
Water drainage  
Levelling  
Special conditions  
In the interest of the environment  
Electrical connection  
22  
22  
23  
23-24  
24  
The Control Panel  
6
24  
24  
25  
Operating sequence  
Washing 4.5 kg of white cotton at 95°C  
Load the laundry  
7-10  
7
7
Measure out the detergent  
Measure out the fabric softener  
Select the required option  
Select the required programme  
Start the machine  
7
7
7
7
8
At the end of the programme  
8
Washing 2 kg of mixed fabrics at 50°C  
Load the laundry  
9
9
Measure out the detergent  
Measure out the fabric softener  
Select the required option  
Select the required programme  
Start the machine  
9
9
9
9
9
At the end of the programme  
10  
Washing Hints  
Which detergent?....  
And in which form?  
11-12  
12  
12  
Wash Care Sym bols  
13  
Washing Program m es  
14-15  
Maintenance and Cleaning  
Descaling  
16-17  
16  
After each wash  
16  
Maintenance Wash  
16  
External cleaning  
16  
Cleaning the dispenser drawer  
Cleaning the drawer recess  
Cleaning the pump  
16  
16  
16  
The dangers of freezing  
17  
Som ething Not Working  
Service and Spare Parts  
Guarantee Conditions  
18-19  
19  
20  
Gu id e t o u se t he Inst r u ct io n Bo o k  
The following symbols will be found in the text to guide you throughout the instructions:  
Safety instructions  
Hints and tips  
Environm ental inform ation  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your New Washing Machine  
Your new washing m achine m eets all m odern requirem ents for effective treatm ent of laundry  
with low water, energy and detergent consum ption.  
Automatic cooling of the wash water to 60°C  
In t he int erest  
before draining, with the 95°C programme. This  
reduces thermal shock to fabrics, helping to prevent  
creasing.  
o f t he enviro nm ent  
Materials marked with the symbol  
recyclable.  
are  
The special wool programme with its new delicate  
wash system treats your woollens with extreme care.  
Check with your local Council or Environmental  
Health Office to see if there are facilities in your area  
for re-cycling this appliance.  
The ECO VALVE allows total use of detergent and  
reduces water consumption so saving energy.  
When the appliance is to be scrapped, cut off the  
power supply cable and make the door lock device  
unusable to prevent young children from being  
trapped inside.  
Eco logical hint s  
To save water and energy and help protect the  
environment, we recommend that you follow these  
hints:  
Help to keep your country tidy - use authorised  
disposal sites for your old appliance.  
Adjust the quantity of detergent according to the  
hardness of your water supply, the amount of  
laundry and the degree of soiling.  
How do we help to protect the environm ent?  
We use recycled paper!  
A programme without prewash is sufficient for  
normally soiled laundry.  
The machine works more economically if it is fully  
loaded.  
With adequate pre-treatment, stains and limited  
soiling can be removed; the laundry can then be  
washed at a lower temperature, so saving energy.  
Im p o r t ant  
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.  
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly  
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the  
wash load manually and select a spin programme. For more detailed information see the section headed "Something  
Not Working".  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the Appliance  
1 Detergent dispenser drawer  
2 Programme guide  
3 Control panel  
1
3
F
1
2
0
3
W
AQUACYCLE 1200  
C
D
A
MIXED FABRICS  
H
FAST COLOUREDS  
ON-OFF  
QUICK  
WASH  
R
I
N
S
E
HALF  
LOAD  
L
M
J
H
O
L
D
4 Door opening handle  
5 Drain pump  
NON FAST COLOUREDS  
WOOL CARE  
DELICATES  
WORN ONCE  
FRESHEN UP  
SHORT SPIN  
DRAIN  
WHITES  
+
PREWASH  
WHITES  
HAND RINSES  
LONG SPIN  
B
N
K
P
F
G
2
6 Adjustable feet  
4
5
Det ergent d isp enser d rawer  
6
Prewash  
Main wash  
Fabric softener  
C0069  
Child safet y feat u re  
This machine incorporates a special child safety feature  
to prevent small children from being trapped inside the  
machine.  
To activate this device, rotate the button (without  
pressing it) inside the door clockwise until the groove is  
horizontal. If necessary use a coin.  
To disable this device and restore the possibility of  
closing the door, rotate the button anti-clockwise until  
the groove is vertical.  
P1131  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Control Panel  
PROGRAMME  
F
1203  
W
AQUACYCLE 1200  
FAST COLOUREDS  
NON FAST COLOUREDS  
WHITES + PREWASH  
WHITES  
HAND RINSES  
LONG SPIN  
C
D
A
MIXED FABRICS  
WOOL CARE  
DELICATES  
WORN ONCE  
FRESHEN UP  
SHORT SPIN  
DRAIN  
H
L
M
ON-OFF  
QUICK  
WASH  
RINSE  
HOLD  
HALF  
LOAD  
B
F
G
J
N
K
ZANUSSIQUALITY  
P
5
1
2 3 4  
6
7
1 De t e r ge n t d isp e n se r d r a w e r  
and Program m e gu id e  
5 RIN SE HOLD b u t t o n  
Press this button to make the machine stop with water  
in the drum after the cotton, synthetic or delicate wash  
cycles.  
This prevents any creasing which may occur if the  
clothes are left damp in the drum. When it is  
convenient for you to empty the machine, simply press  
this button again so that the machine can proceed to  
drain and spin, or turn the dial to the drain programme  
P”.  
2 On/Off b u t t o n  
By depressing this button the machine starts operating.  
When depressed again, the machine stops.  
3 Mains-o n light  
This light illuminates when the machine starts working  
If this button is not activated, the washing programmes  
will end with a spin.  
and goes out when the ON/OFF button is released.  
4 QUICK WASH Bu t t o n  
By depressing this button on programmes A, B, C, D  
6 HALF LOAD b u t t o n  
Select this button to reduce water consumption on the  
rinse cycle when washing a smaller load of cottons or  
linens (maximum load size = 2.25 kg).  
and H the wash time is reduced.  
This is suitable only for garments which are lightly  
soiled.  
7 Program m e select o r d ial  
Turn the dial clockwise to select the required wash  
programme.  
Before setting the dial to any position the machine must  
be switched off by depressing the ON/OFF button  
again.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Sequence  
Before the first wash, we recommend that you pour 2  
3. Measu re o u t t he fab r ic  
so ft ener  
litres of water into the main wash compartment  
of  
the detergent drawer in order to activate the ECO valve.  
Then run a cotton cycle at 60°C, without any laundry in  
the machine, to remove any manufacturing residue from  
the drum and tub.  
Pour 1/2 a measure of detergent into the dispenser  
drawer and start the machine.  
If required, pour fabric softener into the compartment  
marked  
(the amount used must not exceed the  
“MAX” mark in the drawer).  
Close the drawer gently.  
WASHING 4.5 KG OF WHITE COTTON AT 95°C  
Suppose you have 4.5 kg of normally soiled laundry to  
wash. It is white cotton and is suitable for high  
temperature washing.  
C0071  
1. Lo ad t he lau nd r y  
Open the door by pulling the door handle outwards.  
Place the laundry in the drum, one item at a time,  
shaking them out as much as possible. Close the door.  
4. Select t he req u ired o p t io n  
Depress QUICK WASH button or RINSE HOLD if  
required .  
RINSE  
HOLD  
HALF  
LOAD  
QUICK  
WASH  
P0004  
2. Measu re o u t t he d et ergent  
Pull out the dispenser drawer until it stops.  
5. Select t he req u ired p rogram m e  
Turn the programme selector dial clockwise to the  
programme B or A (if you wish to perform a prewash).  
Measure out the amount of detergent required and pour  
it into the main wash compartment  
.
If you wish to carry out the prewash, pour detergent into  
the compartment marked  
.
B
P1006S  
C0070  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. St ar t t he m achine  
Before starting up the machine check that:  
the appliance is plugged in  
the water supply taps are turned on  
the drain hose is correctly and securely positioned  
the door and the detergent dispenser drawer are  
closed.  
Depress the ON/OFF button: the mains-on light will  
illuminate and the machine starts operating.  
ON/ OFF  
T0001S  
7. At t he end o f t he p rogram m e  
The machine stops automatically.  
The door is controlled by a safety device which releases  
2 minutes after the end of the programme.  
Switch the machine off by depressing the ON/OFF  
button again. The mains-on light goes out.  
When the programme has finished you are advised to  
unplug the appliance and turn off the water taps.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
WASHING 2 KG OF MIXED FABRICS AT 50°C  
4. Select t he req u ired o p t io n  
Depress the QUICK WASH or RINSE HOLD button if  
Suppose you have 2 kg of mixed fabrics to wash. They  
are rather delicate fabrics and should not be washed at a  
high temperature.  
required.  
1. Lo ad t he lau nd r y  
RINSE  
HOLD  
HALF  
LOAD  
QUICK  
WASH  
Open the door by pulling the door handle outwards.  
Place the laundry in the drum, one item at a time,  
shaking them out as much as possible. Close the door.  
5. Select t he req u ired p rogram m e  
Turn the programme selector dial clockwise to the  
programme H.  
P0004  
H
2. Measu re o u t t he d et ergent  
Pull out the dispenser drawer until it stops.  
Measure out the amount of detergent required and pour  
M0017S  
it into the main wash compartment  
.
6. St ar t t he m achine  
Before starting up the machine check that:  
the appliance is plugged in  
the water supply taps are turned on  
the drain hose is correctly and securely positioned  
C0070  
the door and the detergent dispenser drawer are  
closed.  
3. Measu re o u t t he fab r ic  
so ft ener  
Depress the ON/OFF button: the mains-on light will  
illuminate and the machine starts operating.  
If required, pour fabric softener into the compartment  
marked  
“MAX” mark in the drawer).  
Close the drawer gently.  
(the amount used must not exceed the  
ON/ OFF  
T0001S  
C0071  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. At t he end o f t he p rogram m e  
After the last rinse, the machine stops with the water left  
in the wash tub, to prevent the fabric from creasing.  
To drain the water, select programme “K” (short spin)  
or “P” (drain).  
The door is controlled by a safety device which releases  
2 minutes after the end of the programme.  
Switch the machine off by depressing the ON/OFF  
button again. The mains-on light goes out.  
When the programme has finished you are advised to  
unplug the appliance and turn off the water taps.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Hints  
Do NOT overload the machine. Weigh the laundry the  
For wool, use gentle detergent only in small  
quantities.  
first few times you use the appliance.  
Bleach is very corrosive; it should be used with care  
and kept out of reach of children.  
The average weights of the most common items are  
listed below as a guide:  
Some stains such as fruit, wine, grass, rust etc. are  
difficult to remove and should be treated before  
washing with specific products, which can be found  
in most household shops. In some cases it may help  
to soak the stain before washing with a special pre-  
soak product or biological detergent.  
1000g = 1 kg  
Sheet  
700-1000 g  
100-200 g  
400-500 g  
50-100 g  
Pillow case  
Tablecloth  
Only wool marked “Pure New Wool - washable,  
preshrunk” can be washed in the machine using the  
wool programme; other types of wool should be  
washed by hand or dry cleaned.  
Serviette  
Tea towel  
70-120 g  
Linen hand towel  
Towelling hand towel  
Towelling bath towel  
Bath robe  
100-150 g  
150-250 g  
700-1000 g  
1000-1500 g  
200-300 g  
150-200 g  
If you have used the machine to wash, rinse or spin  
only non-colour fast garments, there may be dye left  
in the sump. To ensure any subsequent wash is not  
contaminated with the dye, select and carry out a  
rinse and spin programme, without any garments, to  
ensure that any dye is removed from the sump.  
Man’s shirt  
Apron  
Once you have finished using the machine, you are  
advised to unplug it and turn off the water taps.  
Load the laundry loosely alternating large items with  
small ones.  
Sort the laundry according to the type of fabric,  
colour-fastness and how dirty it is.  
Avoid washing unhemmed or torn items as they may  
unravel.  
Before washing, empty all pockets of small objects  
which may have been left inside (coins, keys, screws  
etc). as these could damage the drain pump.  
When washing curtains, remove the hooks.  
Close poppers and zips and fasten loose buttons.  
It is essential to wash new coloured items separately  
when washing for the first time.  
When washing fabrics requiring different wash  
temperatures together, always select the lowest  
temperature.  
White items should not be washed with coloured  
items.  
Very small items (handkerchiefs, ribbons, socks etc)  
should be washed in a washing bag or a pillow case.  
Use a good quality detergent suitable for automatic  
washing machines.  
Use the correct quantities of detergent.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
And in w hich fo r m ?  
Which d et ergent ?....  
Not only are there different types of detergent, but they  
are also available in different forms. Whether you chose  
a powder or liquid in traditional or compact form is  
your own personal choice.  
To ensure you obtain the best wash results from your  
appliance, it is important to use the right detergent in  
your everyday wash, and only detergents recommended  
for use in automatic machines.  
To maintain the appearance of your clothes and  
household textiles and to make them last longer you  
should use different types of detergent for different  
washes, whether for whites, colours or delicates.  
TRADITIONAL POWDERS  
Pour the powder directly into the dispenser drawer. Do  
not sprinkle powder onto clothes in the machine drum.  
TRADITIONAL LIQUIDS  
Liquid can be placed in the main wash compartment of  
the detergent drawer marked with the symbol  
the machine immediately upon placing the detergent in  
the dispenser drawer.  
Alternatively the detergent is measured into the  
specially designed dosing device* which should be  
placed on top of the laundry, and at the back of the  
machine drum.  
WHITES  
We recommend the Ariel product  
range which is biological and  
designed to provide excellent  
cleaning and stain removal even  
at low temperatures.  
, start  
NON BIOLOGICAL  
If you prefer to use a non  
biological detergent, which does  
not contain enzymes we  
recommend Fairy. Fairy provides  
good cleaning and stain removal.  
COMPACT POWDERS AND LIQUIDS  
Compact detergents (or concentrates as they are also  
known) are available in liquid or powder form, and  
generally require a smaller dosage. Follow the  
manufacturer’s instructions to ensure the most  
economical usage. Pour the detergent directly into the  
dispenser drawer, or alternatively measure the detergent  
into the specially designed dosing device* which  
should be placed on top of the laundry, and at the back  
of the machine drum.  
COLOUREDS  
For coloured items you should use a  
detergent which is designed to clean  
while maintaining the original colour.  
Ariel Color does not contain bleach  
and therefore helps to preserve  
colours.  
* If you use a dosing device in a washer dryer,  
please ensure the dosing device/ball is removed  
before carrying out a drying programme.  
DELICATE ITEMS  
FABRIC CONDITIONERS  
When washing delicates such as  
woollens, you should use a product  
which is specially designed to care for  
fine fabrics.  
These are ideal for improving ‘softness’, and also  
reduce static cling on synthetics and make ironing  
easier. They are available in two types:  
Dreft Automatic is suitable for  
woollens and other delicates.  
For example Lenor liquid fabric  
softener, for use in the washing  
machine/washer dryer. The  
liquid fabric softener should be  
poured into the compartment  
LAUNDRY BLEACH  
For additional stain removal you may  
wish to use a product such as Ace  
Gentle Bleach which is used in addition  
to your chosen detergent. Ace is  
suitable for all washable fabrics  
including silks, woollens and coloureds.  
marked with the symbol  
.
Follow the manufacturer’s dosage  
instructions and never exceed the  
MAX level.  
Bounce conditioning sheets for use  
in a tumble dryer. We recommend  
the conditioning sheets are pinned  
(using a safety pin) to an article  
of laundry and placed in the  
tumble dryer.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wash Care Sym bols  
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling  
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct  
programme on your washing machine.  
WASHING SYMBOL  
WASH ACTION  
Normal (Maximum)  
Normal (Maximum)  
FABRIC  
White Cotton or Linen  
without Special Finishes  
95  
Cotton, Linen or Viscose  
without Special Finishes  
Colourfast at 60°C.  
60  
50  
Nylon, Polyester/Cotton, Viscose  
with Special Finishes,  
Cotton/Acrylic Mix.  
Reduced (Medium)  
Normal (Maximum)  
Reduced (Medium)  
Cotton, Linen or Viscose  
Colourfast at 40°C but not 60°C.  
40  
40  
Acrylics, Acetate, Triacetate, Wool  
mixes, Polyester/wool blends.  
Wool, wool mixtures, Silks  
Do not machine wash  
40  
Much Reduced (Minimum)  
Hand wash only  
BLEACHING  
Chlorine bleach may be used  
IRONING  
Cotton, Linen, Viscose  
Polyester mixtures, Wool  
Acrylic, Nylon, Polyester  
Hot iron  
Warm iron  
Cool iron  
DRY CLEANING  
May be dry cleaned. Other letters and/or a bar beneath the circle will  
indicate the required process to the dry cleaner.  
TUMBLE DRYING  
with high heat setting  
with low heat setting  
May be tumble dried  
A cross through any symbol means «DO NOT»  
X
Im p o r t ant N o t es  
fabric conditioner to avoid the conditioner entering the  
For best results, always use the dispenser drawer for  
machine prematurely.  
dispensing detergents and liquid additives.  
Once the dispenser has been filled, close it by pushing it  
in gently. This is particularly important if you are using  
When using liquid detergent and a prewash programme,  
place the detergent into the correct compartment in the  
dispenser drawer, after the prewash has finished.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Program m es  
Programmes for cotton and linen  
Progr.  
time  
mins.  
Wash programme/  
Washing symbol  
Degree of soil  
and type of laundry  
Programme  
dial position  
Possible  
options  
Max  
Load  
Description  
Prewash at 40 °C  
Wash at 95°C  
3 rinses  
WHITES  
+
PREWASH  
QUICK WASH  
HALF LOAD  
RINSE HOLD  
For heavy soiled cotton  
items.  
145  
4.5 kg  
A
Long spin  
White cotton, for  
example normally soiled  
work garments, sheets,  
household linen,  
Wash at 95 °C  
3 rinses  
Long spin  
QUICK WASH  
HALF LOAD  
RINSE HOLD  
WHITES  
4.5 kg  
4.5 kg  
120  
130  
B
C(*)  
D
underwear, towels.  
Wash at 60 °C  
3 rinses  
Long spin  
Fast coloured cotton or  
linen fabrics, shirts,  
underwear, towels.  
QUICK WASH  
HALF LOAD  
RINSEHOLD  
FAST  
COLOUREDS  
Non fast coloured  
cotton or linen fabrics,  
shirts, blouses,  
Wash at 40 °C  
3 rinses  
Long spin  
QUICK WASH  
HALF LOAD  
RINSE HOLD  
NON- FAST  
COLOUREDS  
4.5 kg 115  
4.5 kg 58  
underwear.  
Separate rinse cycle for  
hand washed cotton  
and linen items  
HAND  
RINSES  
4 rinses  
Long spin  
F
Separate spin for  
cotton and linen items  
LONG SPIN  
12  
Long spin  
4.5 kg  
G
(*) This programme at 60°C with cold water filling and a wash load of 4.5 kg is the reference programme for the  
Energy label according to EEC Directive 92/75.  
Water filling:  
30°-40° programmes: cold water filling  
50°-60° programmes: hot and cold filling  
95° programme: hot water filling  
The programme times are intended as a guide only. The actual time will vary depending on incoming water  
temperature and pressure.  
Important!  
Some programmes when selected may start with a short drain. This is quite normal and not a fault with the  
appliance.  
When a programme is selected, the selector dial will advance to the water filling position. E.g. Programme B is  
selected, there is a short drain. The appliance takes in water and the selector will appear to move to the C position.  
The appliance will have memorised the programme selected, in this case B, and will run the correct programme  
even though the selector dial appears to be at position C.  
We recommend you not to switch the appliance off and on during its operation. This would modify the memorised  
programme in progress with unsatisfactory washing results.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Program m es  
Programmes for synthetics, mixed fabrics, delicates and wool  
Progr.  
time  
mins.  
Wash programme/  
Washing symbol  
Degree of soil  
and type of laundry  
Programme  
dial position  
Possible  
options  
Max  
Load  
Description  
Synthetic or mixed  
fabrics, underwear,  
coloured garments,  
non-shrink shirts,  
blouses.  
Wash at 50 °C  
3 rinses  
Stop with water in  
tub  
MIXED  
FABRICS  
RINSE HOLD 2 kg  
60  
H
Wash at 30 °C  
3 rinses  
Stop with water in  
tub  
WORN  
ONCE  
Lightly soiled synthetic  
or mixed fabrics  
2 kg  
2 kg  
30  
6
RINSE HOLD  
J
Separate spin for hand  
washed delicate items  
Draining of water  
and short spin  
SHORT  
SPIN  
K
Specially tested  
programme for wool  
garments bearing the  
“Pure new wool, non-  
shrink, machine  
Wash at 40 °C  
3 rinses  
Stop with water in  
tub  
WOOL CARE  
DELICATES  
RINSE HOLD  
RINSE HOLD  
1 kg  
50  
L
washable” label.  
Wash at 40 °C  
3 rinses  
Stop with water in  
tub  
Delicate fabrics, for  
example curtains  
M
2 kg  
2 kg  
-
45  
9
1 rinse, with fabric  
softener, if required RINSE HOLD  
Stop with water in  
tub  
This programme can be  
used for softening hand  
washed garments.  
FRESHEN UP  
DRAIN  
N
P
For emptying out the  
last rinse water of these  
programmes  
1
Draining of water  
Important!  
Some programmes when selected may start with a short drain. This is quite normal and not a fault with the  
appliance.  
When a programme is selected, the selector dial will advance to the water filling position.  
We recommend you not to switch the appliance off and on during its operation. This would modify the memorised  
programme in progress with unsatisfactory washing results.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Cleaning  
Before any maintenance or cleaning is carried out you  
must DISCONNECT the appliance from the electricity  
supply.  
Descaling  
The water we use normally contains lime. It is a good  
idea to periodically use a water softening powder in the  
C0073  
C0072  
machine. Do this separately from any laundry washing,  
and according to the softening powder manufacturer's  
instructions. This will help to prevent the formation of  
lime deposits.  
Cleaning t he d rawer recess  
Having removed the drawer, use a small brush to clean  
the recess, ensuring that all washing powder residue is  
removed from the upper and lower part of the recess.  
Replace the drawer and run the rinse programme  
without any clothes in the drum.  
Aft er each wash  
Leave the door open for a while. This helps to prevent  
mould and stagnant smells forming inside the appliance.  
Keeping the door open after a wash will also help to  
preserve the door seal.  
Maint enance Wash  
With the use of low temperature washes it is possible to  
get a build up of residues inside the drum.  
We recommend that a maintenance wash be performed  
on a regular basis.  
P0038  
Cleaning t he p u m p  
The pump should be inspected if  
To run a maintenance wash:  
The drum should be empty of laundry.  
Select the hottest cotton wash programme.  
• the machine does not empty and/or spin  
• the machine makes an unusual noise during draining  
due to objects such as safety pins, coins etc. blocking  
the pump.  
Use a normal measure of detergent, must be a  
powder (such as Ariel Futur).  
Proceed as follows:  
Ex t er nal cleaning  
Clean the exterior cabinet of the appliance with soap  
• Disconnect the appliance.  
• If necessary wait until the water has cooled down.  
• Open the pump door.  
and water only, and then dry thoroughly.  
Cleaning t he d isp enser d rawer  
The washing powder and additive dispenser drawer  
should be cleaned regularly.  
Remove the drawer by pressing the catch downwards  
and by pulling it out. Flush it out under a tap, to remove  
any traces of accumulated powder.  
To aid cleaning, the top part of the additive  
compartment should be removed.  
P1114  
• Place a container close to the pump to collect any  
spillage.  
• Pull out the emergency emptying hose, place it in the  
container and remove its cap.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• When no more water comes out, unscrew the pump  
cover and remove it. Always keep a rag nearby to dry  
up spillage of water when removing the cover.  
Clean the filters using a hard bristle brush.  
Tighten up the inlet hoses.  
P1090  
P1115  
The d anger s o f freezing  
If the machine is exposed to temperatures below 0°C,  
certain precautions should be taken.  
Remove any objects from the pump impeller by  
rotating it.  
Turn off the water taps.  
Unscrew the inlet hoses.  
Place the end of the emergency emptying hose and  
that of the inlet hoses in a bowl placed on the floor  
and let water drain out.  
Screw the water inlet hoses back on and reposition  
the emergency emptying hose after having put the  
cap on again.  
• Put the cap back on the emergency emptying hose and  
place the latter back in its seat.  
When you intend to start the machine up again,  
make sure that the room temperature is above 0°C.  
Important!  
Every time you drain the water through the emergency  
emptying hose you must pour 2 litres of water into the  
main wash compartment of the detergent drawer and  
then run the drain programme. This will activate the  
ECO valve avoiding that part of the detergent remains  
unused at next washing.  
P1117  
• Screw the pump cover fully in.  
• Close the pump door.  
Em ergency em p t ying o u t  
If the water is not discharged, proceed as follows to  
empty out the machine:  
Warning  
When the appliance is in use and depending on the  
programme selected there can be hot water in the pump  
circuit. Never remove the pump cover during a wash  
cycle, always wait until the appliance has finished the  
cycle, and is empty. When replacing the pump cover,  
after a cleaning inspection, ensure it is securely  
retightened so as to stop leaks and young children being  
able to remove it.  
• pull out the plug from the power socket;  
• close the water tap;  
• if necessary, wait until the water has cooled down;  
• open the pump door;  
• place a bowl on the floor and place the end of the  
emergency emptying hose into the bowl. Remove its  
cap. The water should drain by gravity into the bowl.  
When the bowl is full, put the cap back on the hose.  
Empty the bowl. Repeat the procedure until water  
stops flowing out;  
Cleaning t he wat er inlet filt er s  
If your water is very hard or contains traces of lime  
• clean the pump if necessary as previously described;  
deposit, the water inlet filters may become clogged.  
• replace the emergency emptying hose in its seat after  
having plugged it;  
• screw the pump cover again and close the door.  
It is therefore a good idea to clean it from time to time.  
Turn off the water taps. Unscrew the water inlet hoses.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Som ething Not Working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out  
an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.  
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or  
installation, a charge will be made even if the appliance is under guarantee.  
Sym ptom  
Possible causes  
The machine does not start  
The door has not been closed.  
The plug is not properly inserted in the power socket.  
There is no supply at the socket  
The main fuse or the fuse in the plug has blown.  
The selector dial is not correctly positioned.  
The ON/OFF button has not been depressed.  
The machine does not fill  
Ensure the water taps are open.  
The filters in the inlet hoses are blocked.  
The inlet hoses may be squashed or kinked.  
The door has not been closed.  
The machine fills then empties  
immediately  
The end of the drain hose is too low.  
The end of the drain hose is submerged in water.  
There is no vent in the end of the drain hose.  
The machine does not empty and/or  
does not spin  
The drain hose may be squashed or kinked.  
The drain pump may be blocked.  
The drain hose extension, if fitted, is not correct. Follow the  
instructions for connecting to the waste.  
The drainage system pipes are blocked.  
The wash load is unbalanced: redistribute the clothes inside the drum to  
allow the machine to spin.  
A programme which ends with water in tub has been selected.  
There is water on the floor  
Too much detergent or unsuitable detergent has been used (creates too  
much foam).  
Check whether there are any leaks from one of the inlet hose(s) fittings.  
It is not always easy to see this as the water runs down the hose; check  
to see if it is damp.  
The drain hose may be damaged or not securely positioned.  
The detergent dispenser drawer or recess is clogged.  
The drainage system pipes are blocked.  
Unsatisfactory washing results  
Too little detergent or unsuitable detergent has been used. An  
insufficient amount of detergent leaves the laundry looking grey and  
causes lime scale to form.  
Stubborn stains have not been treated prior to washing  
The correct wash programme has not been selected.  
Too much laundry has been placed in the drum.  
The machine vibrates when spinning  
The internal packing has not been removed.  
The machine is in contact with the wall or furniture.  
The machine is not stable and level (check diagonally).  
The washing load is badly distributed in the drum.  
Maybe there is very little laundry in the drum.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sym ptom  
Possible causes  
The programme is still running.  
The door lock has not yet released.  
Water in the tub: the door cannot be opened if water is present in the  
The door will not open  
tub.  
The electronic unbalance detection device has cut in because the  
Spinning starts late or the machine  
does not spin  
laundry is not evenly distributed in the drum. The laundry is  
redistributed by reverse rotation of the drum. This may happen several  
times before the unbalance disappears and normal spinning can resume.  
If, after 10 minutes, the laundry is still not evenly distributed in the  
drum, the machine will not spin. In this case, redistribute the load  
manually and reselect the spin programme.  
The machine makes an unusual  
noise  
The machine is fitted with a type of motor which makes an unusual  
noise compared with other traditional motors. This new motor ensures  
a softer start and more even distribution of the laundry in the drum  
when spinning, as well as increased stability of the machine.  
No water is visible in the drum  
Machines based on modern technology operate very economically  
using very little water without affecting performance.  
Before calling out an engineer, please ensure you have  
read the details under the heading “Something Not  
Working”.  
Ser vice & Sp are Par t s  
In the event of your appliance requiring service, or if  
you wish to purchase spare parts, please contact your  
local Service Force Centre by telephoning:  
When you contact the Service Force Centre you will  
need to give the following details:  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of fault  
4. The model and serial number of the appliance (found  
on the rating plate - see picture)  
0870 5 929929  
Your telephone call will be automatically routed to the  
Service Force Centre covering your post code area.  
For the address of your local Service Force Centre and  
further information about Service Force, please visit the  
For Customer Service in Ireland please contact us at the  
address below:  
5. The purchase date.  
Please note that a valid purchase receipt or  
guarantee documentation is required for in-  
guarantee service calls.  
Zanussi Electrolux  
Electrolux Group (Irl) Ltd  
Long Mile Road  
Dublin 12  
P
r
o
M
o
d
.
N o .  
d
.
. . . . . . . . . .  
. . . . . . . . . . .  
S
Republic of Ireland  
e r  
.
N o  
.
. .  
. . . . . . .  
Tel: +353 (0)1 4090751  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042 BD  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customer Care Department  
Zanussi Electrolux  
55-77 High Street  
Slough  
Cu st o m er Care Dep ar t m ent  
For general enquiries concerning your Zanussi  
Electrolux appliance or for further information on  
Zanussi Electrolux products, please contact our  
Customer Care Department by letter or telephone at the  
Berkshire  
SL1 1DZ  
Tel 08705 727727*  
* calls to this number may be recorded for training  
purposes.  
Guarantee Conditions  
Appliances found to be in use within a commercial  
environment, plus those which are subject to rental  
agreements.  
St and ard gu arant ee co nd it io ns  
We, Zanussi Electrolux, undertake that if, within 12  
months of the date of the purchase, this ZANUSSI  
ELECTROLUX appliance or any part thereof is proved  
to be defective by reason only of faulty workmanship or  
materials, we will, at our option repair or replace the  
same FREE OF ANY CHARGE for labour, materials or  
carriage on condition that:  
Products of Zanussi Electrolux manufacture which  
are NOT marketed by Zanussi Electrolux.  
Eu ro p ean gu arant ee  
If you should move to another country within Europe  
then your guarantee moves with you to your new home  
subject to the following qualifications:  
The appliance has been correctly installed and used  
only on the electricity supply stated on the rating  
plate.  
The guarantee starts from the date you first  
The appliance has been used for normal domestic  
purposes only, and in accordance with the  
manufacturer’s instructions.  
purchased your product.  
The guarantee is for the same period and to the same  
extent for labour and parts as exists in the new  
country of use for this brand or range of products.  
The appliance has not been serviced, maintained,  
repaired, taken apart or tampered with, by any  
person not authorised by us.  
The guarantee relates to you and cannot be  
transferred to another user.  
All service work under this guarantee must be  
undertaken by a Service Force Centre.  
Your new home is within the European Community  
(EC) or European Free Trade Area.  
Any appliance or defective part replaced shall  
become the Company’s property.  
The product is installed and used in accordance with  
our instructions and is only used domestically, i.e. a  
normal household.  
This guarantee is in addition to your statutory and  
other legal rights.  
The product is installed taking into account  
Home visits are made between 8.30am and 5.30pm  
Monday to Friday. Visits may be available outside these  
hours in which case a premium will be charged.  
regulations in your new country.  
Before you move please contact your nearest Customer  
Care Centre, listed below, to give them details of your  
new home. They will then ensure that the local Service  
Organisation is aware of your move and able to look  
after you and your appliances.  
Ex clu sio ns  
This guarantee does not cover:  
France  
Germany  
Italy  
Senlis  
+33 (0) 344 62 29 29  
+49 (0) 800 234 7378  
+39 0434 39 4700  
Damage or calls resulting from transportation,  
improper use or neglect, the replacement of any light  
bulbs or removable parts of glass or plastic.  
Nurnberg  
Pordenone  
Stockholm  
Slough  
Sweden  
UK  
+46 (0) 8 672 53 90  
+44 (0) 1753 219897  
+353 (0) 1 4090 751  
Costs incurred for calls to put right an appliance  
which is improperly installed or calls to appliances  
outside the United Kingdom.  
Ireland  
Dublin  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
Care must be taken to ensure that the appliance  
does not stand on the electrical supply cable.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Any plumbing work required to install this  
appliance should be carried out by a qualified  
plumber or competent person.  
Should the appliance power supply cable need to  
be replaced, this should be carried out by our  
Service Force Centre.  
Technical Specifications  
DIMENSIONS  
Height  
Width  
Depth  
85 cm  
60 cm  
59 cm  
POWER SUPPLY VOLTAGE  
TOTAL POWER ABSORBED  
230-240 V/50 Hz  
2050 W (10A)  
WATER PRESSURE  
Minimum (hot)  
Minimum  
35 kPa  
50 kPa  
Maximum  
800 kPa  
MAXIMUM RECOMMENDED LOAD  
Cotton, linen  
Synthetics  
Delicate fabrics  
Wool  
4.5 kg  
2 kg  
2 kg  
1 kg  
SPIN SPEED  
Maximum  
1200 rpm  
CONSUMPTION DATA FOR WASHING  
4.5 KG NORMALLY SOILED COTTON  
ITEMS AT 60°C (PROGR. C) WITH COLD  
WATER FILLING  
Energy  
Water  
0.85 kWh  
56 litres  
This appliance complies with the following E.E.C. Directives:  
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;  
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fill all the holes with the plastic plugs supplied with the  
instruction booklet.  
Unp ack ing  
All transit bolts and packing must be removed  
before using the appliance.  
You are advised to keep all the packaging for re-use in  
case the machine is to be transported again.  
Using a spanner unscrew and remove the two rear  
bottom screws. Slide out the two plastic pins.  
P1128  
P0002  
Lay the machine gently on its back, making sure that the  
hoses are not squashed.  
Important !  
You are advised to keep all the packaging for re-use in  
case the machine is to be transported again.  
If the appliance is to be moved, the precautions listed  
under “The dangers of freezing” must be carried out  
i.e. the residual water in the hoses must be pumped out.  
P0001  
P1129  
Po sit io ning  
Install the machine on a flat hard floor.  
Remove the polystyrene block from the bottom of the  
machine and release the two plastic bags.  
Very carefully slide out the left polythene bag, removing  
it towards the right and then downwards.  
Make sure that air circulation around the machine is not  
impeded by carpets, rugs etc. Check that the machine  
does not touch the wall or other kitchen units.  
Never place cardboard, wood or similar materials under  
the machine to compensate for any unevenness in the  
floor.  
1
2
Your new washing machine has been designed to be  
permanently plumbed in to your home’s water supply  
and drainage system. However, if this is not possible, it  
may be connected to suitable existing taps with the drain  
hose discharging into a sink.  
3
P1124  
P1126  
The appliance has two inlet hoses, hot and cold, with  
female 3/4” BSP thread connectors. If this connection is  
not compatible with the plumbing of the existing  
installation, a variety of connectors are available from  
good hardware stores and plumbers merchants to suit  
most domestic plumbing. Any alteration to your existing  
plumbing must be carried out by a competent person, or  
qualified plumber.  
Repeat the operation for the right polythene bag,  
removing it towards the left and then upwards.  
Inst allat io n o n a Su sp end ed Flo o r  
P1127  
Suspended wooden floors are particularly susceptible to  
vibration. To help prevent vibration we recommend you  
place a waterproof wood panel, at least 15 mm thick  
under the appliance, secured to at least 2 floor beams  
with screws. If possible install the appliance in one of  
the corners of the room, where the floor is more stable.  
Remove the polystyrene base.  
Set the machine upright and unscrew the remaining rear  
screw. Slide out the relevant pin.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wat er inlet  
The inlets on the back of the appliance are colour coded,  
blue for cold and red for hot.  
Wat er d rainage  
This appliance is designed to be permanently plumbed  
into your home's water supply and drainage system.  
Connect the hoses to a tap with a 3/4” thread.  
Do not use already employed inlet hoses.  
The appliance drain hose should hook into a standpipe,  
the hook in the drain hose is formed using the plastic  
“U-Piece” supplied.  
The standpipe should have an internal diameter of  
approximately 38mm (see diagram) thus ensuring there  
is an air break between the drain hose and standpipe.  
1
38 mm.(1/2") diameter  
standpipe  
P1088  
If only a cold water supply is available, connect the two  
hoses to a cold water outlet by means of a «Y»  
connection piece.  
P1040  
Installation should comply with local water authority  
and building regulations’ requirements.  
When discharging into a standpipe ensure that the top of  
the curve in the hose end is no more than 90cm (35.4'')  
and no less than 60cm (23.6'') above floor level. The  
upright standpipe should have a minimum length of  
30cm (12'') from the bottom of the elbow to the top of  
the pipe (see diagram).  
The appliance must be given a separate cold water  
supply and not be connected to a mixer tap, a single  
outlet water heater or a booster pump. A minimum  
water pressure of 0.48 bar is required for safe operation  
of the appliance.  
If you cannot make the cold water connection direct  
from the rising mains, you may be able to operate the  
appliance from your cold water storage system.  
3 pin  
There should be a minimum distance of 5.02m  
(16.5 ft) between the appliance’s inlet and the bottom of  
the water storage tank.  
There will be sufficient pressure for the hot water  
supply, providing there is a minimun height of 2.74  
metres (9 ft) between the bottom of the cold water  
storage tank and the bottom of the hot water cylinder.  
P1130  
Make sure that it is designed in such a way, that the end  
of the drain hose cannot be covered with water.  
Set the hoses correctly by loosening the ring nuts. After  
positioning the inlet hoses, be sure to tighten the ring  
nuts again to prevent leaks.  
The drain hose may be extended to a maximum of 4  
metres. An additional drain hose and joining piece  
is available from your local Service Force Centre.  
The joining piece must have an internal diameter of  
18mm.  
P0021  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you intend the drain hose to empty into a sink, make  
sure that the sink is empty and the plug hole is not  
blocked. Use the plastic “U-Piece” supplied.  
Sp ecial co nd it io ns  
If the floor is carpeted or covered with crumbly or soft  
material, insert a rigid support base under the feet to  
prevent noise, vibration or displacement. The base  
should protrude a few centimetres beyond the edges of  
the machine.  
Warning  
The machine should NOT be placed on deep pile  
carpeting.  
P0022  
Note  
Please ensure that when the appliance is installed it is  
easily accessible for the engineer in the event of a  
breakdown.  
The drain hose must not be kinked.  
Im portant  
Before connecting up the machine to new pipework  
or to pipework that has not been used for some time,  
run off a reasonable amount of water to flush out any  
debris that may have collected in the pipes.  
For a correct functioning of the machine the drain  
hose must be hooked on the proper support piece  
situated on the top of the back side of the appliance.  
In t he int erest o f t he  
enviro nm ent  
Washing machines and dishwashers should be  
connected to the FOUL drainage system, the water will  
then be taken to a sewage works for treatment before  
being discharged safely into a river.  
It is essential that these appliances are not connected to  
the surface water drainage system as this water is  
discharged directly into a river or stream and may cause  
pollution. If you require any further advice please  
contact your local water authority.  
Levelling  
Level the washing machine by raising or lowering the  
feet. The feet may be tight to adjust as they incorporate  
a self locking nut, but the machine MUST be level and  
stable.  
P1051  
SHOWER  
SINK TOILET  
Any necessary adjustment can be made with a spanner.  
Accurate levelling prevents vibration, noise and  
displacement of the machine during operation.  
BATH  
BIDET  
Some vibration is inevitable, especially if mounted on a  
wooden floor.  
WASHING  
MACHINE  
DISHWASHER  
RAINWATER  
'RUN-OFF'  
Sprung wooden floors are particularly susceptible to  
vibration. For advice, consult a builder. If possible,  
always place the machine on a solid floor.  
FOUL DRAIN  
SURFACE WATER  
DRAINS & SEWERS  
FOUL SEWERS  
SEWAGE  
TREATMENT  
WORKS  
UNTREATED  
DISCHARGE  
TREATED  
DISCHARGE  
RIVER  
RIVER  
P0987  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The wire coloured brown must be connected to the  
terminal marked «L» or coloured red.  
Upon completion there must be no cut, or stray strands  
of wire present and the cord clamp must be secure over  
the outer sheath.  
Elect r ical co nnect io n  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
WARNING: THIS APPLIANCE MUST BE  
EARTHED.  
WARNING:  
A cut off plug inserted into a 13 amp socket is  
a serious safety (shock) hazard.  
Ensure that the cut off plug is disposed of  
safely.  
The manufacturer declines any liability should  
this safety measure not be observed.  
Before switching on, make sure the electricity supply  
voltage is the same as that indicated on the appliance’s  
rating plate. The rating plate is located at the top of the  
rim of the open door.  
Should the appliance power supply cable neeed to be  
replaced, this should be carried out by our Service  
Force Centre.  
Note  
When the appliance is installed the power supply cable  
must be accessible.  
P
r o  
M
d
o d  
.
N o  
.
. . . . . . . . . .  
.
. . . . . . . . . . .  
S
e
r
.
N
o
.
.
.
.
.
.
.
.
.
.
Per m anent co nnect io n  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042 BD  
In the case of permanent connection it is necessary that  
you install a double pole switch between the appliance  
and the electricity supply (mains), with a minimum gap  
of 3mm between the switch contacts and of a type  
suitable for the required load in compliance with the  
current electrical regulations.  
The appliance is supplied with a 13amp plug fitted.  
In the event of having to change the fuse in the plug  
supplied, a 13amp ASTA approved (BS1363A) fuse  
must be used.  
Should the plug need to be replaced for any reason,  
proceed as described below.  
The switch must not break the yellow and green earth  
cable at any point.  
The wires in the mains lead are coloured in accordance  
with the following code:  
Green and Yellow  
Blue  
- Earth  
- Neutral  
- Live  
Brown  
GREEN & YELLOW  
E
L
N
BROWN  
BLUE  
CORD CLAMP  
P1041  
The wire coloured green and yellow must be connected  
to the terminal marked with the letter «E» or by the  
earth symbol  
or coloured green and yellow.  
The wire coloured blue must be connected to the  
terminal marked «N» or coloured black.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
From the Electrolux Group. The world’s No. 1 choice.  
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.  
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum  
cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150  
countries around the world.  
© Electrolux plc 2003  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weed Eater Trimmer 530086924 User Manual
White Outdoor Lawn Mower LT 542K, LT 942K, LT 946K User Manual
White Rodgers Thermostat 1F70 User Manual
Wibur Curtis Company Coffeemaker Brewer User Manual
Woodstock Router 1107907 User Manual
Wright Manufacturing Lawn Mower 31897 User Manual
Xantrex Technology Marine Battery Freedom SW 2000 User Manual
Xerox Photo Printer C65 User Manual
Yamaha Motorcycle FJR1300 User Manual
Zenoah Trimmer CHTZ6010 User Manual