CERAMIC BUILT-IN HOB
ZKL 850 LX
OPERATING INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Content
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Child Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety During Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety When Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to Avoid Damage to Your Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50
50
50
50
50
50
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disposing of the Packaging Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Information on Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
51
51
51
Appliance Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
Prior to Using for the first Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
Initial Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
Operation of the cooking surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching on the double circuit cooking zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
53
53
53
53
Usage, Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tips on Saving Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
54
54
54
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Light Soilage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stubborn Soilage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Heavy Soilage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The hob frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
55
55
55
55
56
56
Something not working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
57
What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
57
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Directives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Instructions for the Installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing into a kitchen worksurface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
58
58
58
59
60
60
61
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
Customer Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
The safety aspects of this appliance comply with the accepted technical standards and the applicable safety regula-
tions. Nevertheless, we consider it our obligation to make you aware of the following safety information:
Electrical Safety
How to Avoid Damage
to Your Appliance
The new appliance may only be installed and con-
nected up by qualified personnel, according to the
manufacturers instructions and to the relevant
country standards.
Do not use the hob as a work surface or for storage.
Do not use the cooking zones with empty pans, or wi-
thout pans.
Repairs to the appliance should only be carried out by
approved service engineers. Improper repairs can
cause injury or significant malfunction. If your ap-
pliance needs repairing, please contact your local Cu-
stomer Service department.
Ceramic glass is insensitive to temperature shock and
very robust, however it is not unbreakable. Hard and
sharp objects, in particular, can damage the cooking
surface if they fall on it.
If your appliance malfunctions, or fractures, cracks or
splits appear:
Do not use cast iron pans or pans with damaged bases
that are rough or burred. Scratching may occur if the
pans are slid.
–
–
switch off all cooking zones,
Disconnect the hob from the electricity supply.
Do not place any pans on the hob frame. Scratching
may occur or the paint damaged.
Child Safety
The cooking zones will become hot when the hob is in
use. Therefore, always keep small children away.
Ensure that liquids containing acids, e.g. vinegar, le-
mon or scale remover do not come into contact with the
hob frame, otherwise matt spots will appear.
If sugar or a dish containing sugar comes into contact
with a hot cooking zone and then melts, remove the
soiling immediately whilst still hot using a scraper. If it
cools, damage to the surface may occur on removal.
Safety During Use
This appliance is intended for domestic cooking only.
It is not designed for commercial or industrial purpo-
ses.
Keep all items and materials that can melt away from
the ceramic glass surface, e.g. plastics, aluminium foil,
or oven foils. If something of this nature should melt
onto the ceramic glass surface, it must also be remo-
ved immediately using the scraper.
Do not use the hob to heat the room.
Take care when plugging electrical appliances into
mains sockets near the hob. Connecting leads must
not come into contact with the hot surface.
If you wish to use special types of pan (e.g. a pressure
cooker, simmering pan, wok, etc.), please observe the
manufacturer’s instructions.
Overheated fats and oils catch fire quickly. You should
supervise cooking when preparing foods in fat or oil
(e.g. chips).
Avoid boiling pans dry. The bases could be irreparably
damaged in the process and the glass ceramic coo-
king surface also damaged.
Switch the cooking zones off after use.
If a hot pan is placed on a cold cooking zone, and the
cooking zone is heated by the pan, no indication is gi-
ven on the residual heat display.
Safety When Cleaning
For safety reasons do not clean the appliance with a
steam jet or high pressure cleaner.
Clean the hob in accordance with the maintenance
and cleaning instructions in this manual.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal
Disposing of the
Packaging Material
All packaging material can be recycled, shee-
ting and hard foam parts are appropriately
marked. Please dispose of the packaging ma-
terial and any old appliance properly.
Please observe national and regional regula-
tions on appliances and packaging material,
and the markings on the materials (material
separation, waste collections, recycling de-
pots).
Information on
Disposal
The appliance must not be disposed of with
household rubbish.
You can obtain information about collection
dates or public tips from your local refuse de-
partment or council.
Important! Please make old appliances un-
usable prior to disposal. Cut off the mains ca-
ble.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Appliance Description
Features of the hob
1
Rapid Cooking zone (double–ring)
Ø 210/120 mm
2
3
Rapid Cooking zone
Rapid Cooking zone (double–ring)
Ø 170x265 mm
145 mm
Ø
145 mm
2
3
4
4
5
6
Rapid Cooking zone
Residual heating indicators
Control knobs
Ø
6
1
5
Prior to Using for the first Time
Initial Cleaning
Wipe the ceramic glass cooking surface with a damp
cloth to remove any traces left from manufacturing.
Important: Do not use any caustic or abrasive
cleaners! The surface could be damaged.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of the cooking surface
When the cooking zones are switched on, they
may hum briefly. This is a characteristic of all
ceramic glass cooking zones and does not im-
pair either the function or the life of the applian-
ce.
Control knobs
The control knob is used to set the required heat output
continuously from 1–10.
It can be turned to the right or left.
When you turn the regulator back to the zero position,
the cooking zone will be switched off.
Switching on the
double circuit cooking
zone
On the double circuit cooking zones only the inner hea-
ting circuit is switched on first.
If you want to heat the whole zone, you will have to turn
the rotary switch slightly past position «10» to the point
where it automatically springs back to position «10».
Residual heat indicator
An indicator is assigned to each cooking zone. This il-
luminates as soon as the corresponding cooking zone
becomes hot and warns against inadvertent touching.
Important! As long as the residual heat indica-
tor is illuminated, there is a risk of burns.
Even after the cooking zone is switched off, the corres-
ponding residual heat indicator will remain on until the
cooking zone is cold.
You can use the residual heat for melting and
keeping food warm.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage, Tips
Pans
The better the pan, the better the results.
•
You can recognise good pans by their bases. The
base should be thick and as flat as possible.
•
Pay attention to the base diameter when purchas-
ing pots or pans. Manufacturers often indicate the
diameter of the upper edge of pots and pans.
•
•
•
Pans with aluminium or copper bases can leave
metal discolouration on the glass ceramic surface
that is very difficult or impossible to remove.
Do not use cast iron pans or pans with damaged
bases that are rough or burred. Permanent
scratching may occur when the pans are slid.
convex
concave
When cold, pan bases are normally bowed slightly
inwards approx. 01–05 mm (concave). They
should under no circumstances be bowed out-
wards (convex).
•
Pots and pans should not be smaller in diameter
than the cooking zone and should not exceed the
hotplate diameter by more than 2–4cm if possible.
Tips on Saving Energy
You will save valuable energy if you observe
the following tips:
•
•
Always place pans on the cooking zone before
switching on.
Use only suitable cooking and roast utensils with
smooth and even bases.
•
•
If possible, always fit pans with a lid.
The pan base and cooking zone should be the
same size. Follow the special tips about pots and
pans.
•
•
Soiled cooking zones and pan bases increase the
electricity consumption.
Switch off the cooking zones before the end of coo-
king to make use of the residual heat, e.g. to keep
food warm or for melting.
•
Cooking times are reduced by up to 50% when a
pressure cooker is used.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Hob
Important: Cleaners must not come into con-
tact with the ceramic glass when hot! All clea-
ners must be removed with plenty of clean wa-
ter after cleaning as they may have a caustic
effect when the rings are next heated!
Do not use any aggressive cleaners, such as
e.g. grill or oven sprays, coarse scouring clea-
ners or pan cleaners that cause scratches.
Clean the ceramic glass surface after each use
when it is hand warm or cold. This means you
will avoid soiling becoming burnt on.
Remove scale and water marks, fat spots and
metallic shimmering discolouration with a
commercially available ceramic glass or stain-
less steel cleaner, e.g. with ”Stahl–Fix“ or “Vi-
troclen“.
Light Soilage
1. Wipe the ceramic glass surface with a damp cloth
and a little washing up liquid.
2. Then rub dry with a clean cloth. No residues of
cleaner must be left on the surface.
3. Once a week, thoroughly clean the entire ceramic
glass surface with a commercially available cera-
mic glass cleaner such as “Vitroclen“.
4. Then wipe the ceramic glass surface with plenty of
clean water and rub dry with a clean fluff–free
cloth.
Stubborn Soilage
1. To remove food that has boiled over or burnt on
spots, use a glass scraper.
2. Place the glass scraper at an angle to the glass ce-
ramic surface.
3. Remove soiling by sliding the scraper.
You can obtain glass scrapers and ceramic
glass cleaners from your local Service Force
Centre.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Heavy Soilage
1. Remove burnt on sugar, melted plastic, aluminium
foil or other melted materials immediately, while
the hob is still hot, using a glass scraper.
Important: When using the glass scraper on
the hot cooking zone, there is a risk of burns!
2. Clean the cooking surface as normal once it is
cold.
If the cooking zone has cooled down already
prior to the soilage being removed, warm it up
again for cleaning.
Scratches or dark marks on the ceramic glass
surface, which have been caused by a pan
base with sharp edges, cannot be removed.
However, they do not impair the function of the
cooking surface.
The hob frame
Important! Do not put vinegar, lemons or
scale removers on the hob frame, otherwise
matt spots will appear.
1. Wipe the frame with a damp cloth and a little was-
hing up liquid.
2. Soften dried dirt with a wet cloth. Then wipe off and
rub dry.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Something not working
Please check whether you can rectify small faults on the appliance yourself with the help of the following information.
Should this information be of no assistance in a specific case, please contact your local Service Force Centre.
Warning! Repairs to the appliance should only be carried out by approved service engineers. Improper re-
pairs can cause injury or significant malfunction. If your appliance needs repairing, please contact your local
Service Force Centre.
What to do if ...
... the cooking zones do not work?
Check whether
–
the corresponding cooking zone is switched
on.
–
–
the switch is set to the correct heat setting.
in the case of multi–ring cooking zones: the re-
quired heating circuit is switched on.
the mains fuse (fuse box) has blown.
–
If this information does not provide you with the
necessary assistance, please seek specialist advi-
ce.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Important: Assembly and connection of the
new appliance may only be performed by an
approved installer.
Damaged hobs with cracks or breakages in the
STOP
ceramic–glass surface must not be connected
to the electrical supply.
Technical data
Appliance Dimensions
Width
Depth
Height
766 mm
506 mm
49 mm
Prod-nr: 941 591 737
ZANUSSI
7.0 kW
Cut-Out Dimensions
Serie
230V, 230V 2, 400V 2-3N ~50 Hz
ZKL850LX
Width
Depth
750 mm
490 mm
Typ 211.1FBPGNAPNNA
SC
Power Consumption
Cooking zone front left
Cooking zone rear left
Cooking zone rear right
Cooking zone front right
Heater Element Voltage
Total load
750/2200 W
1200 W
1500/2400 W
1200 W
230 V ~ 50 Hz
7.0 kW
Directives
This appliance conforms with EC–Directives
Low Voltage Directive 73/23/EEC and the amendment to LVD 90/683/EEC
EMC Directive 89/336/EEC and the amendment to EMC 92/31/EEC
CE Marking Directive 93/68/EEC
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions for
the Installer
•
The mains connection must be with a cable with a
plug or there must be a disconnecting device with
at least 3 mm contact opening in the existing do-
mestic electrical installation, which disconnects
the dishwasher completely from the mains supply
in accordance with NIN 2000.
•
In respect of fire protection, this appliance corres-
ponds to type Y (EN 60 335–2–6). Only this type
of appliance may be installed with a high cupboard
or wall on one side.
•
•
•
It is not permitted to fit drawers below the cooking
surface.
Protection against electric shock must be provided
by the installation.
The kitchen unit in which the appliance is fitted
must satisfy the requirements of DIN 68930 in re-
spect of stability.
•
Built–in ovens and cooking surfaces are fitted with
special connector systems. They may only be
combined with appliances with a matching system.
•
•
All cut surfaces are to be sealed with a suitable
sealant for protection against moisture.
On tiled work surfaces, the joints in the area where
the hob sits on the surface must be completely fil-
led with grout.
•
•
On natural, artificial stone, or ceramic tops, the
snap action springs must be bonded in place.
Ensure that the seal is correctly seated in the frame
and that it is seated against the work surface wi-
thout leaving any gaps. Additional silicon sealant
must not be applied, this will make removal more
difficult in the event of the need for service.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing into a kitĆ
chen worksurface
Make a note of the serial number on the ap-
pliance rating plate prior to installation. This
number will be required in the case of requests
for service and is no longer accessible after in-
stallation, as it is on the original rating plate on
the underside of the appliance.
Installation
fig.1
1. Cut out the worktop according to the dimensions
quoted (Fig.1). (Saw exactly along the line.)
2. Fix according to Fig. 2
Position A must be used for screwing–on the catch
springs (Fig.1).
A
A
A
A
Important: The screw must be driven into the worktop
as illustrated.
A
A
Avoid overtightening. Do not use electric or pneu-
matic screwdrivers unless they have, adjustable
slipping clutches (set to 1–1.1 Nm).
fig.2
3. Check the sealing for proper fit and full contact.
4. Place the ceramic hob in the cut–out.
1 Catch spring
2 Screws
3 Worktop
4 Frame
5 Sealing tape
6 Glass ceramic plate
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
A type H05VV–F or higher quality lead must be used
for the mains connection.
The mains connection terminal is on the bottom of the
appliance behind a cover.
The cooking appliance should be connected as shown
on the connection diagram, depending on the mains
supply voltage.
Komponenten–Spannung:
Component Voltage:
230 V
400 V 3N ~
400 V 2N ~
230 V ~
(230 V 2 ~)
The earth lead is connected to the terminal, the earth
wire must be longer than the live wires.
L1
1
2
3
4
5
1
2
3
4
5
1
L1
L2
L3
N
L (L1)
2
3
4
5
If necessary, you can rearrange the bridges on the ter-
minal strip accordingly.
L2
N
N (L2)
PE
The cable connections must be fixed in accordance
with the regulations and the clamping screws securely
tightened.
PE
PE
UK
only
The connection lead should finally be secured with the
cord grip.
Once the appliance has been connected to the
mains, switch on all cooking zones one after
the other for approx. 30 seconds at the maxi-
mum setting to check they are working cor-
rectly.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
If you wish to purchase spare parts or require an engi-
neer, contact your local Service Force Centre by tele-
phoning:
08705 929929
Your telephone call will be automatically routed to the
Service Centre covering your post code area.
When you contact the Service Centre they will need
the following information:
1. Your name & address, including post code.
2. Your telephone number.
3. Clear and concise details of the fault.
4. The model, serial and production number.
(This information can be found the rating plate). In
order that you have this information to hand when
you call, we recommend you write the information
below.
Product No: .................................................................
Serial No: ....................................................................
Model No: ...................................................................
5. Date of purchase.
Please note that it will be necessary to provide
proof of purchase for any in guarantee service
calls.
In–guarantee customers should ensure that the chap-
ter headed ‘Something not working’ has been read, as
the engineer will make a charge if the fault is not a me-
chanical or electrical breakdown.
Customer Care
For general enquiries concerning your Zanussi ap-
pliance or for further information on Zanussi products,
please contact our Customer Care Department by let-
ter or telephone as follows:
Customer Care Department
Zanussi
55–77 High Street
Slough
Berkshire SL1 1DZ
08705 727727 (*)
* calls to this number may be recorded for training pur-
poses.
or visit our website at www.zanussi.co.uk
62
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
374 3670 00
05.01 mh
Download from Www.Somanuals.com. All Manuals Search And Download.
|