DISHWASHER
ZT 685
GB
INSTRUCTION BOOKLET
152989 03/1
Download from Www.Somanuals.com. All Manuals Search And Download.
Con t en t s
For the user
For the installer
In st allat ion in st ru ct ion
Technical specifications
Water supply connections
Water outlet connection
Electrical connection
23
23
24
25
26
Im port an t safet y in form at ion
Gu ide t o u se t h e in st ru ct ion book
Descript ion of t h e applian ce
Th e con t rol pan el
2
3
4
5
Bu ildin g-in
Adjusting the height of the appliance
The furniture door
Securing to the adjacent units
Noise protection
27
27
28
29
30
30
Before u se
Setting the water softener
Rinse aid
Use of detergent
6
6
8
9
Kitchen plinth adjustment
Usin g you r applian ce
Loading your appliance
Adjusting the height of the upper basket
11
11
13
Hin t s an d t ips
14
15
16
Wash in g program m es
Operat in g sequ en ce
Main t en an ce an d clean in g
Internal cleaning
Cleaning the central filter
Cleaning the large filter
External cleaning
Prolonged periods of non-operation
Frost precautions
Moving the machine
17
17
17
17
18
18
18
18
Som et h in g n ot work in g
Service an d spare part s
Gu aran t ee Con dit ion s
19
21
22
Gu ide t o u se t h e in st ru ct ion book
The following symbols will be found in the text to guide you throughout the instructions:
Safet y in st ru ct ion s
St ep by st ep in st ru ct ion s
☞
Hin t s an d t ips
PCO07/1UK
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Descript ion of t h e applian ce
1
2
13
12
3
11
10
4
5
6
9
8
7
IN84
1
Levelling spacers
9. Rinse aid dispenser
10. Central filter
2. Upper basket stop
3. Upper spray arm
4. Salt container
5. Large filter
11. Lower spray arm
12. Upper basket
13. SID (Super Intensity Dispenser)
6. Detergent dispenser
7. Control panel
8. Rating plate
PDA07/1UK
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Th e con t rol pan el
1
2 3
4
5
In this fully integrated appliance the controls are
located on the top of the door. When selecting a
programme, the door needs to be open.
1. O n/O ff pushbutton
Depress this button to switch the dishwasher on.
The On/Off indicator light illuminates indicating that
the washing programme can be selected and started.
Depress again this button to switch the appliance off.
Audible signals have been introduced to help indicate
which operations the dishwasher is performing.
Sh ort sign al "in st ru ct ion accept ed"
When any of the buttons are pressed: a short audible
signal informs you that the machine has accepted the
instruction given.
2. Salt refill indicator light
This illuminates when the salt container needs
refilling. This light will remain on if salt is not added -
for example in a soft water area, where salt is not
required.
Lon g sign al "program m e st art in g"
A continuous audible signal lasting about one second,
heard only when you close the dishwasher door,
informs you that the washing programme is starting.
3. O n/O ff indicator light
In t erm it t en t sign al "en d of program m e"
An intermittent audible signal, lasting for
approximately five seconds, informs you that the
wash programme has finished. If you wish to
deactivate these audible signals, press both the
"NORMAL 65°c" and "BIO 50°c" programme
buttons together for about 3 seconds, until the
intermittent audible signal can no longer be heard.
4. Program m e selector
buttons
Depress the button corresponding to the desired
washing programme (see "Washing programmes"
chart).
5. End of cycle indicator
light
SO234
This light flashes when the programme has finished.
To switch it off depress the On/Off button.
To reactivate the audible signals, press both buttons
together again for about 3 seconds, until an
intermittent audible signal is heard.
PCP11UK
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before u se
Before using your dishwasher for the first time:
ensure that the electrical and water
connections comply with the installation
instructions
remove all packaging from inside the appliance
set the water softener
fill the salt container
fill the rinse aid dispenser.
Setting the water softener
The dishwasher is equipped with a water softener
designed to remove minerals and salts from the water
supply, which would have a detrimental or adverse
effect on the operation of the appliance.
Water
hardness
Use
of
salt
Level
Clarke
degrees
French
degrees
The higher the content of these salts, the harder your
water is.
0 ÷ 7
8 ÷ 20
21 ÷ 40
41 ÷ 60
61 ÷ 80
81 ÷ 120
NO
0 ÷ 5
6 ÷ 17
18 ÷ 28
29 ÷ 42
43 ÷ 63
64 ÷ 84
0
1
*2
3
4
5
YES
YES
YES
YES
YES
Water hardness is measured in equivalent scales, Clarke
degrees and French degrees.
The softener should be adjusted according to the
hardness of the water in your area. Your local Water
Authority can advise you on the hardness of the water in
your area.
* factory setting
If your water is "level 0" it is already soft and therefore
there is no need to use salt. (In this case the salt refill
indicator light will remain illuminated).
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener
should be adjusted.
Level 1
Level 2
Level 3
Level 4
Level 5
"RINSE AND HOLD" programme button
"INTENSIVE 70°c" programme button
"NORMAL 65°c" programme button
"BIO 50°c" programme button
You may change the factory setting level setting by
means of the wash programme selector buttons. Each
button corresponds to a different level (see chart).
To select a differen t level proceed as
follows:
"QUICK 50°c" programme button
- Press the "NORMAL 65°c" and "QUICK 50°c"
programme buttons simultaneously for about 5
seconds until the short signal "instruction accepted" is
heard. The pilot light corresponding to the current
level (level 2) flashes very rapidly.
- Press the programme button corresponding to the
required level.
- 5 seconds after having last pressed any of the
programme buttons, the dishwasher memorises the
level selected and returns to the programme setting
mode.
SO235
PBU04UK
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Filling with salt
If your water is "level 0" it is already soft and therefore
there is no need to use salt. (In this case the salt refill
indicator light will remain illuminated).
Salt must be used from "level 1" upward.
On ly u se salt specifically design ed for
u se in dish wash ers.
All ot h er t ypes of salt n ot specifically
design ed for u se in dish wash er,
especially t able salt , will dam age t h e
wat er soft en er.
Only fill with salt just before starting one of the
complete washing programmes (not the Rinse and Hold
programme). This will prevent any grains of salt or salty
water, which may have been spilled, remaining on the
bottom of the machine for any period of time, which
may cause corrosion.
To fill:
1 . To fill with salt, unscrew the cap of the salt
container.
2 . Pour about 1 litre of water inside the container,
or until it is full (this is necessary only before
filling with salt for the first time).
T
SAL
3 . Then using the funnel provided, pour in the salt
until the container is full (approx. 1.5 - 1.8 kg).
Do not worry if water over flows from the unit
when filling with salt, this is quite normal.
4 . Replace the cap making sure that there is no
trace of salt on the screw thread or on the
gasket.
SR07
5 . Screw on the cap tightly.
The salt container will require topping up periodically.
You are reminded of this by the "Salt refill indicator
light" on the control panel which comes on when the salt
has finished.
Th e "Salt refill in dicat or ligh t " on t h e
con t rol pan el can rem ain illu m in at ed
for 2 -6 h ou rs aft er t h e salt h as been
replen ish ed, assu m in g t h e dish wash er
rem ain s swit ch ed on . If you are u sin g
salt s t h at t ak e lon ger t o dissolve t h en
t h is can t ak e lon ger. Th e fu n ct ion of
t h e m ach in e is n ot affect ed.
PFS06UK
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, spot and streak free drying.
The dispenser, which is positioned inside the door, holds
about 110 ml of rinse aid, which is sufficient for 16 - 40
dishwashing programmes, depending upon the dosage
setting.
Fillin g wit h Rin se Aid:
1 . Open the container by turning the lid (A)
anticlockwise.
A
2 . Add the rinse aid until the container is
completely full (approx. 110 ml). The indicator
(B) will be completely dark.
BR01
3 . Top up the rinse aid when the indicator (B)
becomes clear.
En su re t h at t h e lid is closed aft er every
refill.
B
5
4
Do not put liquid detergent in the rinse aid department.
Clean up any rinse aid spilt during filling with an
absorbent cloth to avoid excess foaming during the next
wash.
BR03
Adju st in g t h e dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6 position
selector (C) (position 1 minimum dosage, position 6
maximum dosage). (Start from position 3). Gradually
increase the dose if there are drops of water or lime
spots on the dishes after washing. Reduce it if there are
sticky whitish streaks on the dishes.
C
5
BR02
PFR01UK
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Use of detergent
On ly u se det ergen t s specifically
design ed for u se in dish wash ers.
We recommend the use of Finish detergents which are
available in the following options:
Finish Double Action Tablets. Each tablet has the exact
amount of detergent required, simply place in the
dispenser.
Finish Powder recommended for every day use.
Finish Liquid Gel ideal for every day use. As the gel is
extra gentle is it recommended for fine bone china.
To fill t h e dish wash er wit h det ergen t
proceed as follows:
1 . Open the dispenser lid by pulling the catch (D).
D
2 . Add the detergent according to the
recommendations in the programme chart. As
all detergents are not the same, you should
also consult the instructions on the packet.
To help correctly dose the right amount of
detergent, inside the container there are two
reference marks:
M A X
M I N
DE07
- MIN
= 15 ml
= 30 ml
- MAX
3 . Always close the lid.
4 . If the programme has a prewash add the
required detergent in the "SID" located in the centre
of the upper basket.
Insufficient quantities of detergent will produce poor
washing results, whereas an excessive amount of
detergent will not improve washing results and is also
wasteful.
DE14
Using no more than the correct amount also contributes
to reducing pollution.
PUD04UK
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Com pact detergents with
enzym es
In these compact powders the environmently unfriendly
components have been replaced by natural enzymes and
other more biodegradable substances.
The enzymes deploy their full dirt dissolving power at a
temperature as low as 50°C.
By choosing the "Bio" programmes you can therefore
achieve the same cleaning results that would otherwise
be achievable only with 65°C programmes and
conventional detergents.
For best results we recommend the use of Finish detergents, rinse aid and salt.
P OURING
PACK
W
N E
E
N
O
TI
C
A
BL
U
DO
L
I
Q
U
I
D
G
E
L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT
DE15
PUD03UK
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g you r applian ce
Loading your appliance
Before placing dishes in the machine, remove any scraps
of food, to avoid clogging the filters and consequently
reducing the performance.
Do n ot load very sm all it em s wh ich
can fall t h rou gh t h e bask et s.
Open the door and slide out the baskets to load the
dishes.
The lower basket
The lower basket is designed to take saucepans, lids,
plates (up to 27 cm in diameter), salad bowls, cutlery
etc.
Serving dishes and large lids should be arranged around
the edge of the basket, ensuring that the upper spray arm
can turn freely.
UI39
IEC 436 / DIN 44990
The two rear rows of prongs on the lower basket can be
easily lowered to allow you to load pots, pans and
bowls.
To lower the prongs:
☞
Slightly pull them upward and let them drop
down (see picture)
To bring them back to the standing position, just
pull them up again.
UI21
UI18
PBA10UK
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The cutlery basket
Lon g bladed k n ives st ored in an
u prigh t posit ion are a pot en t ial
h azard.
Lon g an d/ or sh arp it em s of cu t lery
su ch as carvin gs k n ives m u st be
posit ion ed h orizon t ally in t h e u pper
bask et .
Tak e care wh en loadin g or u n loadin g
sh arp it em s su ch as k n ives.
Cutlery should be placed in the removable cutlery
basket with the handles facing downwards. If the
handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with
the handles facing upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
Silver cutlery tends to go black if mixed with steel
cutlery. Place it in the cutlery basket separate from the
others.
The cutlery basket is in two parts which can be
separated to give greater loading flexibility. To separate
the two parts, slide them horizontally in opposite
directions and pull them apart. To reassemble, reverse
the procedure.
UI07
PBA11UK
12
Download from Www.Somanuals.com. All Manuals Search And Download.
The upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 24 cm in diameter), salad
bowls, cups and glasses.
Light items (plastic bowls etc.) should be loaded in the
upper basket and arranged so they do not move.
Arrange items on and underneath the fold-down cup
racks so that water can reach all surfaces. For taller
items, the cup racks can be folded upwards. Long-stem
glasses can then be suspended from the prongs of the
cup racks.
IEC 436 / DIN 44990
US28
Before closin g t h e door, en su re t h at
t h e spray arm s can rot at e freely.
Aft er loadin g or u n loadin g you r
m ach in e always close t h e door, as an
open door can be a h azard.
US29
Adjusting the height of the
upper basket
If washing very large plates (over 27 cm and up to 31
cm in diameter) you can load them in the lower basket
after moving the upper basket to the higher position.
US39
To m ove t o t h e h igh er posit ion proceed as
follows:
1 . Pull out the basket until it stops.
2 . Carefully lift both sides upwards until the
mechanism is engaged and the basket is stable.
When the top basket is in the higher position it
will only take plates up to 20 cm in diameter and
you will not be able to use the raised cup racks.
RC04
To lower t h e bask et t o t h e origin al
posit ion :
1 . Pull out the basket until it stops.
2 . Carefully lift both sides upwards and then allow the
mechanism to drop back down slowly, keeping hold
of it.
Never lift or lower t h e bask et on on e side
on ly.
PBA14UK
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Hin t s an d t ips
To save energy
Place dishes in the machine immediately after every
meal and wait until the dishwasher is full before
washing.
Item s not suitable for
dishwashers:
Th e followin g it em s sh ou ld n ot be
wash ed in t h e dish wash er (u n less t h ey
are sold as dish wash er proof):
If necessary run the Rinse and Hold programme (see
"Washing Programmes" chart on the following page),
so that any food scraps do not become caked on the
dishes while you are waiting to run the complete wash
programme.
- Cutlery with wooden or horn handles or
glued parts
- bronze cutlery
- saucepans with wooden handles
- aluminium ware
Do not prewash dishes under running water.
- crystal ware
- leaded glass
For best washing results:
Before loading remove all scraps of food and soak
very heavily soiled pots and pans.
- plastic items
- antique or fine decorated china
Certain types of decoration can discolour when
washed in a dishwasher.
Arrange saucepans, cups and glasses etc. upside-
down.
Crystal-ware and plastic objects, if not guaranteed
dishwasher proof should be washed by hand.
Tilt items with convex or concave surfaces so that the
water drains off easily.
Certain types of glass can also become opaque
after being washed several times in a dishwasher.
Avoid contact between the dishes as far as possible.
A chemical reaction can occur between silver cutlery
and stainless steel cutlery. As a precaution, do not
wash together.
You will improve drying results by leaving the
dishwasher door ajar for at least 15-30 minutes as
soon as the programme finishes.
Iron and cast iron objects can rust and stain other
items.
Wait a few minutes before removing the dishes; in
this way they will be cooler and the drying will be
improved.
Aluminium tends to go black, copper, pewter
and brass tend to stain.
Empty the lower basket first and then the upper one;
this will avoid water dripping from the upper basket
onto the dishes in the lower one.
If in dou bt ch eck wit h m an u fact u rer
of t h e it em .
Wh en bu yin g n ew dish es, en su re
t h at t h ey are dish wash er proof.
PHT01UK
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash in g program m es
Recommended quantity
of detergent
Cycle
Degree of soil
Programme
Required
description
and
type of load
pushbuttons
in the
SID
in the
dispenser
Any.
RINSE &
HOLD
Partial load (to be
completed later in
the day).
/
/
1 cold rinse
ON
OFF
RINSE & HOLD
Prewash up to 55°C
Main wash up to 70°C
2 cold rinses
1 hot rinse up to 65°C
Thermal dry
Heavy soil.
Crockery, cutlery
pots and pans
INTENSIVE
70°c
ON
OFF
INTENSIVE
70°c
25 g
10 g
Cold prewash
Main wash up to 65°C
1 cold rinse
1 hot rinse up to 65°C
Thermal dry
Normal soil.
Crockery and
cutlery
NORMAL
NORMAL
65°c
*
25 g
5 g
ON
OFF
65°c
Cold prewash
Main wash up to 50°C
1 cold rinse
1 hot rinse up to 65°C
Thermal dry
Normal soil.
Crockery and
cutlery
BIO
*
BIO
50°c
25 g
25 g
5 g
ON
50°c
OFF
Light soil.
Crockery and
cutlery
Main wash up to 50°C
1 cold rinse
1 hot rinse up to 55°C
QUICK
**
QUICK
50°c
ON
OFF
/
50°c
Testing programme according to IEC 436/DIN 44990
Programme "NORMAL 65°c" with detergent type A and programme "BIO 50°c" with detergent type B;
Standard place settings: 12.
*
Rinse aid selector on position 3.
Recommended quantity of detergent:
25 g in the dispenser
5 g in the SID.
** This is a special programme for quick washing (approx. 40 minutes) a full load of lightly soiled crockery etc.
PWP09UK
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operat in g sequ en ce
1. Check the filters
9. At the end of the
washing program m e
Ensure they are clean and properly positioned
(see cleaning instructions).
The dishwasher will automatically stop and an
intermittent audible signal of about 5 seconds
informs you that the programme has finished.
2. Check that there is rinse
aid and salt
Wait until the end of the signal before opening
the door.
3. Load the dishes
10. Switch off the
dishwasher
Remove any scraps of food.
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the plates,
saucers, glasses and cups etc. in it.
Slide the basket back into the machine.
Open the door.
The "End of cycle" indicator light flashes.
Depress the On/Off button to switch the
dishwasher off.
4. Ensure that the spray
arm s can rotate freely.
11. Cancel the wash
program m e
5. Measure out detergent
To change a wash programme in progress
depress the button corresponding to the
programme you wish to cancel for about 1
second, until the relevant control light goes out.
Add the required amount of detergent into the
dispenser according to the "Washing
programmes" chart and close the lid.
The dishwasher is now reset and you can select
a new programme.
6. Close the detergent
dispenser lid
In gen eral it is n ot advisable t o open
t h e door wh ile t h e m ach in e is
work in g. If t h e door is open ed
h owever, a safet y device en su res
t h at t h e m ach in e st ops.
7. Select the program m e
The selection of a programme occurs with the
door partially opened.
Depress the On/Off button; the On/Off
indicator light comes on.
Depress the programme button which
corresponds to the washing programme you
wish to select; the corresponding indicator light
will flash.
Care m u st be t ak en if t h e door is
open ed du rin g t h e h ot ph ase or
im m ediat ely aft er a program m e h as
fin ish ed, as st eam m ay escape.
Wh en t h e wash program m e h as
fin ish ed, it is recom m en ded t h at t h e
dish wash er is u n plu gged an d t h e
wat er t ap t u rn ed off.
8. Start the program m e
Close the dishwasher door. An audible signal of
about 1 second advises you that the
programme has started. The indicator light
which corresponds to the programme under
way is now permanently on.
POS06UK
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Main t en an ce an d clean in g
Internal cleaning
Ensure that the seals around the door, the detergent and
rinse aid dispensers are cleaned regularly with a damp
cloth.
We recommend the use of Finish Dishwasher Cleaner
every 3 months or run a 65°C wash without dishes using
detergent. Regular use of Finish Dishwasher Cleaner
cleans inaccessible parts, eliminates unpleasant food
odours and helps prevent the build-up of limescale.
Cleaning the central filter
(After each wash)
Scraps of food may accumulate in the drain filter (A)
and should be removed by rinsing the filter under
running water.
To rem ove t h e drain filt er:
☞
simply pull it out by the handle.
A
Once cleaned, refit the filter by pushing it back to its
original position until it engages.
MA04
Cleaning the large filter
(Every two months)
If necessary clean the large filter (B) on both sides under
running water, using a brush.
To rem ove t h e large filt er
☞
1.
2.
3.
Remove the spray arm by pulling it upwards on
one side.
Turn the column (C) anticlockwise by 90° and
then slide out the filter.
90°
Once cleaned refit it following the above
instructions in reverse order.
B
4.
Ensure the filter is in its original position, the
handle of the drain filter should be pointing
towards the front of the appliance.
C
MA05
Th e dish wash er m u st n ot be u sed
wit h ou t filt ers.
In correct reposit ion in g an d fit t in g of
t h e filt ers will produ ce poor wash in g
resu lt s.
Clean in g t h e filt ers is vit al t o en su re
correct operat ion of t h e m ach in e.
PMC04UK
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Check that the SID is not clogged with detergent
residue. If necessary, rinse it under running water after
having removed it from the basket by twisting it
anticlockwise and pulling it upwards.
Fasten it back onto the support by turning it clockwise.
Never u se you r dish wash er wit h ou t
t h e SID dispen ser.
MA12
External cleaning
Clean the external surfaces of the machine and control
panel with a damp soft cloth. If necessary use only
neutral detergents. Never use abrasive products,
scouring pads or solvent (acetone, trichloroethylene
etc....).
Prolonged periods of non-
operation
If you are n ot u sin g t h e m ach in e for an y
period of t im e you are advised t o:
1 . Unplug the appliance and then turn off the
water;
2 . Fill the rinse aid dispenser;
3 . Leave the door ajar to prevent the formation of
any unpleasant smells;
4 . Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the
temperature is below 0°C. If this is unavoidable, empty
the machine, close the appliance door, disconnect the
water inlet pipe and empty it.
Moving the m achine
If you h ave t o m ove t h e m ach in e (m ovin g
h ou se et c....):
1 . Unplug it;
2 . Turn the water tap off;
3 . Remove the water inlet and discharge hoses;
4 . Pull the machine out together with the hoses.
Avoid over tilting the machine during transport.
PMC05UK
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Som et h in g n ot work in g
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling
out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
The dishwasher is fitted with a number of alarm systems which can help you quickly determine the cause of any
problems.
If the "On/Off" indicator light on the control panel is off and you see the following signals, carry out the suggested
corrective action:
- switch off the dishwasher, switch back on and start the wash programme.
If the fault code reappears, contact your local Service Force Centre.
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or
installation a charge will be made even if the appliance is in guarantee.
Sym ptom
Fault code
Solution
The machine will not start
■ The On/Off button has not been pressed.
■ The door has not been properly closed.
■ The plug is not properly inserted in the power
socket.
■ Check the plug fuse.
■ There is no current at the socket.
The dishwasher does not
fill with water
"Rinse & Hold"
programme light
flashing very fast
■ Ensure the water tap is open.
■ Ensure the mains water supply has not been cut off.
■ The inlet hose may be squashed or bent.
Reposition the hose.
■ The inlet hose may be blocked.
Switch off the water supply, and clean the filter.
The filters are blocked
"Intensive"
programme light
flashing very fast
■ Clean the filters (refer to “Maintenance and
cleaning”).
■ The spray arms are not rotating. Ensure the
crockery is loaded correctly.
The dishwasher will not drain
"Quick"
programme light
flashing very fast
■ The drain hose may be squashed or bent.
Reposition the hose.
■ The sink may be blocked. Clear any blockages.
■ The drain hose extension is not correct. Follow the
instructions for connecting to the waste.
■ There is no vent in the end of the drain hose.
"Normal" or "Bio"
programme light
flashing very fast
■ Switch off the dishwasher. Switch it back on and
start the programme. If the alarm reappears, call
the local Service Force Centre.
The machine is noisy
■ Dishes are rattling against each other, refer to
"Loading your machine".
■ The spray arms are knocking against the dishes.
Refer to "Loading your machine".
The door is difficult to close
■ The dishwasher is not level, or not properly built-
in.
PSN08UK
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Sym ptom
Solution
The dishes are not clean (poor wash)
■ The baskets are too full.
■ The dishes have not been arranged properly.
■ The spray arms do not rotate.
■ The spray arms are clogged.
■ The filters are clogged.
■ The filters are not in position.
■ Not enough detergent has been used or it is unsuitable.
■ The detergent is old or has gone hard.
■ The salt container cap is not properly closed.
■ The washing programme selected is too gentle.
Visible lime deposits or white film on
the dishes
■ The rinse aid has run out or too little is being used.
■ Check that there is salt and that the salt cap is tight.
■ Ensure the water softener has been adjusted to suit the water
hardness in your area.
The dishes are not quite dry
■ The dishes have been left too long inside the machine.
PSN09UK
20
Download from Www.Somanuals.com. All Manuals Search And Download.
If after all these checks, the problem persists, contact
your local Service Force Centre, quoting the model and
serial number. This information can be found on the
rating plate located on the right hand side of the
dishwasher door (see picture).
Prod.No. ........ Ser. No. .........
Service and spare parts
Mod. ........
RA01
In the event of your appliance requiring service, or if
you wish to purchase spare parts please contact your
local Zanussi Service Force Centre by telephoning:
0990 929929
Your telephone call will be automatically routed to the
Service Centre covering your post code area. Service
Centre addresses can be found in the accompanying
Customer Care book.
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working” and have the model number and purchase date
to hand.
In-guarantee customers should ensure that the
checks under the heading “Something Not Working”
have been made as the engineer will make a charge if
the fault is not a mechanical or electrical breakdown.
Please note that it will be necessary to provide proof
of purchase for any in-guarantee service calls.
Custom er Care Departm ent
For general enquiries concerning your Zanussi appliance
or for further information on Zanussi products please
contact our Customer Care Department by letter or
telephone as follows:
Customer Care Department
Zanussi
Zanussi House
Hambridge Road
Newbury
Berkshire
RG145EP
Tel: 01635 521313
PSN06UK
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Gu aran t ee Con dit ion s
Standard guarantee conditions
We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof
is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace
the same FREE OF CHARGE for labour, materials or carriage on condition that:
• The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s
instructions.
• The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not
authoried by us.
• All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.
• Any appliance or defective part replaced shall become the Company’s property.
• This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
Exclusions
Th is gu aran t ee does n ot cover:
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or
removable parts of glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the
United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are subject to rental
agreements.
• Products of Zanussi manufacture which are not marketed by Zanussi.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home
subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of
use for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within European Community (EC) or European Free Trade Area.
• The product is installed and used in accordance with our instructions and is only used domestically, i.e. a
normal household.
• The product is installed taking in account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new
home. They will then ensure that the local Service Organisation is aware of your move and able to look after you
and your appliance.
France
Germany
Italy
Sweden
UK
Senlis
+33 (0) 44 62 29 99
Nurenberg +49 (0) 911 323 2600
Pordenone +39 (0) 1678 47053
Stockholm +46 (0) 8 738 79 50
Newbury +44 (0) 1635 521313
PSN07UK
22
Download from Www.Somanuals.com. All Manuals Search And Download.
In st allat ion in st ru ct ion s
An y elect rical work requ ired t o in st all
t h is applian ce sh ou ld be carried ou t
by a qu alified elect rician or
com pet en t person .
An y plu m bin g work requ ired t o in st all
t h is applian ce sh ou ld be carried ou t
by a qu alified plu m ber or com pet en t
person .
En su re t h e m ach in e is easily accessible for
servicin g wh en in st alled.
Technical specifications
DIMENSIONS
Width
Height
Max depth
59.6 cm
81.8 - 87.8 cm
55 cm
Max depth with open door
111.4 cm
ELECTRICAL CONNECTION
MOTOR RATING DURING WASH
POWER OF HEATING ELEMENT
OVERALL POWER
Voltage
220/240 V - 50 Hz
200 W
2100 W
2300 W
WATER SUPPLY PRESSURE
Minimum
Maximum
50 kPa (0.5 bar)
800 kPa (8 bar)
CAPACITY (STANDARD IEC)
PLACE SETTINGS
12
CONSUMPTION
Water
19 l
Electricity
1.4 kW/h
PTS09UK
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Rem ove all pack agin g before posit ion in g
t h e m ach in e.
If possible, position the machine next to a water tap and
a drain.
W ater supply connections
This dishwasher must be plumbed into a cold water
supply.
The water pressure must be within the limits given in
the technical specifications.
Your local Water Authority will advise you on the
average mains pressure in your area.
The dishwasher features fill and drain hoses which can
be turned either to the left or the right to suit the
installation.
Th e lock n u t m u st be correct ly fit t ed t o
avoid wat er leak s.
Avoid bends or kinks in the hose which could prevent or
slow down the water supply.
If the machine is connected to new pipes or pipes which
have not been used for a long time, you should run the
water for a few minutes before connecting the inlet
hose. This will prevent deposits of sand or rust clogging
the inlet hose filter.
PWA01UK
24
Download from Www.Somanuals.com. All Manuals Search And Download.
W ater outlet hose
connection
The end of the drain hose can be connected in the
following ways:
A- To the sink outlet siphon, securing it if necessary
with a clip.
B- To a wall outlet provided with a vent-hole, minimum
internal diameter 4 cm.
The waste connection must be at a height of between 30
cm (minimum) and 100 cm (maximum) from the floor.
It makes no difference which way the drain hose faces,
either to the right or left of the dishwasher.
A
C
B
Ensure the hose is not bent or squashed as this could
prevent or slow down the discharge of water.
C- If you use a drain hose extension it must be no longer
than 2 metres and its internal diameter must be no
smaller than the diameter of the hose provided.
+ 2 m max
CS11
Likewise the internal diameter of the couplings used for
connections to the waste outlet must be no smaller than
the diameter of the hose provided.
Th e sin k plu g m u st n ot be in place wh en
t h e m ach in e is drain in g as t h is cou ld cau se
t h e wat er t o siph on back in t o t h e m ach in e.
PWA04UK
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Th is applian ce m u st be eart h ed.
Th e m an u fact u rer declin es an y
respon sibilit y sh ou ld t h is safet y m easu res
n ot be observed.
If the plug that is fitted to your appliance is not suitable
for the socket, it must be cut off and the appropriate plug
fitted.
Im port an t
The wires on the mains lead are coloured in accordance
with the following code:
Green an d Yellow
Blu e
-Eart h
-Neu t ral
-Live
CE03
Brown
If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug.
Proceed as follows:
1 . Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter
"E" or the earth symbol or coloured green and
yellow.
2 . Connect the Blue (neutral) wire to the terminal in the
plug which is marked with the letter "N" or coloured
black.
3 . Connect the Brown (live) wire to the terminal in the
plug which is marked with the letter "L" or coloured
red.
The plug moulded onto the lead incorporates a 13amp
BSI362 fuse. Only ASTA or BSI fuses should be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured insert
at the base of the product.
A replacement cover/carrier must be obtained from your
local Service Force Centre.
Th is applian ce com plies wit h t h e followin g
E.E.C. Direct ives:
- 7 3 / 2 3 or 1 9 .2 .7 3 (Low Volt age Direct ive)
an d su bsequ en t m odificat ion s;
- 8 9 / 3 3 6 or 3 .5 .8 9 (Elect rom agn et ic
Com pat ibilit y Direct ive) an d su bsequ en t
m odificat ion s.
PWA02UK
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Bu ildin g-in
This dishwasher is designed to be fitted under a kitchen
counter or worksurface.
It is essential that the recess dimensions indicated in the
diagram are followed.
No further openings for venting of the dishwasher are
required, but only to let the water fill and drain hose and
power supply cable pass through.
The recess height may be anywhere between 820 and
880 mm from the floor as the dishwasher incorporates
adjustable feet (max 60 mm).
A distance of 2 mm should be allowed between the top
of the dishwasher and the counter top.
596
600
550
max
Adjusting the height of the
appliance
-
To adju st t h e h eigh t proceed as follows:
+
II64
1. Loosen or tighten the two front feet.
2. The rear foot is adjusted by turning the screw in
the middle of the front kick plate to the left or
right.
A pad is supplied for the rear foot to make sliding the
appliance in and out of the recess easier.
To fit the pad, press it onto the rear foot.
If required, the dimensions of this pads can be reduced
by breaking it where marked.
II52
Good levelling is essential for correct closure and
sealing of the door. When the appliance is correctly
levelled, the door will not catch on the levelling spacers,
either side of the cabinet.
If the door does not close correctly, loosen or tighten the
adjustable feet until the machine is perfectly level.
IN11
IN12
PFI20UK
27
Download from Www.Somanuals.com. All Manuals Search And Download.
The furniture door
The door on this appliance is designed for the overlay of
a panel having the following dimensions:
Width:
Height:
596 mm
664 - 724 mm max
Thickness: 20 mm max
Weight: 2 - 7.5 kg max
The panel height should be no more than indicated,
otherwise complete opening of the door will no
longer be possible as the panel hits against the
dishwasher plinth.
Mounting the furniture door
onto the door
596 max
The height of the panel depends on the height of
adjacent kitchen units (see kitchen plinth adjustment).
The panel must be fitted with a handle, as the
dishwasher handle will be hidden by the panel. Drill the
panel with a Ø 2 x 14 bit according to the dimensions
indicated in the figure.
525
=
=
Screw the two fastening pivots in the holes indicated in
the figure.
II92
Mount the decor panel by inserting the two fastening
pivots into the slotted holes of the door. Lift the decor
panel until perfect alignment with the fascia panel is
obtained.
Once the correct position has been found, open the door
and fasten the decor panel by means of the six 4 x 40
screws provided, using the holes through the inner door.
II79
II80
PFI16/1UK
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing to the adjacent
units
To prevent the dishwasher tilting, it must be secured to
either the worktop or adjacent kitchen cabinet/wall using
the brackets supplied.
Insert the two fixing brackets into the slots provided in
the top front part of the dishwasher as shown in the
figure.
Secure the brackets to the adjacent units with the 3.5 x
16 screws using the upper or the side holes.
Th e applian ce m u st be secu red t o t h e
u n derside of t h e u n derside of t h e
work t op u sin g t h e brack et s provided.
Failu re t o do t h is cou ld cau se dam age
or in ju ry.
II54
PFI14/1UK
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise protection
Adhesive noise protection ensures excellent noise
insulation. This should be fitted when the dishwasher
has been mounted in the recess and the height adjusted.
Apply the protection as shown in the drawing, making
sure that the non-adhesive section reaches right down to
the floor.
II61
Kitchen plinth adjustm ent
To allow correct opening of the door it is sometimes
necessary to cut the kitchen plinth. Refer to the cutting
table.
According to dimensions (a) and (b) as shown on the
figure, you will find on the following table the depth (x)
of the cut to be made on the plinth.
II59
The dimensions (a) and (b) of the table are those most
frequently used in the kitchen furnitures.
a
b
II15
Height (a)*
170 160 150 140 130 120 110 100
136 131 125 118 110 100 93 85
135 131 125 118 110 102 92 85
137 132 125 118 110 102 94 85
138 134 128 120 110 104 95 85
90
75
75
75
75
78
80
85
40
50
60
70
X
80
/
/
/
139 130 124 115 105 98 88
90
/
/
138 129 120 110 100 90
100
/
135 125 115 105 95
600 mm
minimum
(*) dimensions in mm
X
Dimensions of the
cut on the plinth
PFI17UK
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1 02/99
Download from Www.Somanuals.com. All Manuals Search And Download.
|