DISHWASHER
ZDI 6895 SX
INSTRUCTION BOOK
152975 55/1
UK
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
It is most important that this instruction book should be retained with the appliance for future reference. Should the
appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure
that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and
the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the
appliance.
G Long bladed knives stored in an upright position are a
potential hazard.
G Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
G When finishing loading or unloading close the door, as an
open door can be a hazard.
G Do not sit or stand on the open door.
Installation
G This appliance is heavy. Care should be taken when
moving it.
G It is dangerous to alter the specifications or attempt to
modify this product in any way.
G Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.
G Any electrical work required to install this appliance should
be carried out by a qualified electrician or competent
person.
G Any plumbing work required to install this appliance should
G Isolate the appliance from the power supply and turn off the
water supply after use.
G Care should be taken when cleaning the bottom door seal
and hinge area as any exposed metal edges may cut if
care is not taken.
G This product should be serviced by an authorised Service
be carried out by a qualified plumber or competent person.
engineer, and only genuine spare parts should be used.
Child Safety
G This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the controls
or play with the product.
G Under no circumstances should you attempt to repair the
machine yourself. Repairs carried out by inexperienced
persons may cause injury or serious malfunctioning.
Contact your local Service Force Centre. Always insist on
genuine spare parts.
G Keep all packaging well away from children.
G Keep all detergents in a safe place out of children's reach.
Conservation
In the interest of the environment:
During Use
G Items that are contaminated by petrol, paint, steel or iron
debris, corrosive, acidic or alkaline chemicals must not be
washed in this dishwasher.
G Under no circumstances should you open the door whilst
the appliance is in operation. Always turn off the appliance
before opening the door.
G Materials marked with the symbol
are recyclable.
G Check with your local Council or Environmental Health
Office to see if there are facilities in your area for re-cycling
this appliance.
G When the appliance is to be scrapped, cut off the power
supply cable and make the door closing device unusable to
prevent young children from being trapped inside.
G Only use detergent specifically designed for use in
G Help to keep your country tidy - use authorised disposal
dishwashers.
sites for your old appliance.
Description of the appliance
1. Levelling spacers
2. Upper basket stop
3. Upper spray arm
4. Salt container
5. Large filter
1
13
12
2
6. Detergent dispenser
7. Control panel
3
8. Rating plate
11
10
4
5
9. Rinse aid dispenser
10. Central filter
11. Lower spray arm
12. Upper basket
6
13. "SID" detergent dispenser
(Super Intensity Dispenser)
9
8
7
IN84
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The control panel
2. reduce the temperature of the water in the last rinse
(No Dry)
The indicator light corresponding to the selection will
come on.
1. On/Off indicator light
2. On/Off push button
Eco Dry
No Dry
3. Indicator lights
Open door
This option is not available with the following
programmes:
Illuminates when the door has not been properly
closed.
Programme 1 (Rinse and Hold)
Programme 8 (Quick wash 50°C)
Programme 11 (Quick 30I)
Programme 12 (Plate warmer)
If both indicator lights are off, the normal drying phase
will be carried out.
Salt
Illuminates when the salt has run out, to remind
you to refill the salt container.
Water tap
Flashes when:
- The water tap is closed.
- The mains water supply has been cut off.
- The inlet hose may be blocked.
7. Digital display
Rinse aid
Illuminates when the rinse aid has run out, to
remind you to refill the rinse aid dispenser.
8. Delay start push button
Allows the start of the programme to be delayed by a
minimum of 1 hour, up to 12 hours.
4. Programme selection push button
For the setting of the wash programme refer to the
"Washing programmes" chart.
9. Programme start push button
This is the last push button to press after having set the
programme and closed the door.
It starts the programme.
5. Half load push button
This option is useful and economical when only a few
dishes need washing.
The prewash phase will be automatically excluded.
Remember to load all the dishes into both baskets.
When this option is selected the corresponding indicator
light comes on.
This option is not available with the following
10. Programme phase indicator lights
Each phase is indicated with a symbol:
Prewash / Rinse and Hold
Wash
Rinse
Drying
programmes:
Programme 1 (Rinse and Hold)
Programme 8 (Quick wash 50°C)
Programme 11 (Quick 30I)
As soon as you select a washing programme, this
illuminates all the phases the programme consists of.
As the programme progresses, the phase under way will
illuminate.
Programme 12 (Plate warmer)
At the end of the programme the phase indicator lights
turn off.
6. Drying options push button
By pressing this push button you can opt to:
1. reduce the temperature of the drying phase (Eco Dry)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing.
Short "instruction accepted" signal
When any of the push buttons are pressed (except the
On/Off push button), a short audible signal informs you that
the machine has accepted the instruction given.
Long "programme run" signal
A continuous audible signal informs you that the washing
programme is starting.
Intermittent "end of programme" signal
An intermittent audible signal informs you that the wash
programme has ended.
"Alarm" intermittent signal
The machine is fitted with a number of alarm systems to
help you determine the cause of any problems (see
"Something not working").
An intermittent audible signal informs you that an
alarm is activated.
To deactivate these audible signals, press simultaneously
and keep pressed both HALF LOAD and DELAY push
buttons for about 5 seconds, until you hear 3 short intermittent
audible signals, this means that the audible signals have been
deactivated.
SO433
To reactivate these audible signals, press simultaneously
and keep pressed both HALF LOAD and DELAY push
buttons for about 5 seconds, until you hear 3 short intermittent
audible signals, this means that the audible signals have been
reactivated.
Both operations (to deactivate or reactivate the audible
signals) must be carried out before starting a washing
programme; the setting will remain memorised after
switching off the dishwasher.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before use
Before using your dishwasher for the
first time:
2. Press the DELAY push button within 5 seconds until the
required level appears in the display. The level increases
by 1 each time the push button is pressed.
1. Ensure that the electrical and water connections comply
3. 5 seconds after the DELAY push button has last been
pressed, the dishwasher memorises the level selected and
returns to the programme setting mode.
with the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and then fill
with salt
Filling with salt
Only use salt specifically designed for use in
dishwashers.
5. Fill the rinse aid dispenser.
6. Run a Rinse and Hold programme.
All other types of salt not specifically designed for use in
a dishwasher, especially table salt, will damage the water
softener.
Setting the water softener
Only fill with salt just before starting one of the complete
washing programmes. This will prevent any grains of salt
or salty water, which may have been spilled, remaining on
the bottom of the machine for any period of time, which
may cause corrosion.
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, Clarke
degrees, French degrees and PPM (parts per Million).
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
To fill:
1. To fill with salt, unscrew the cap of the salt container.
2. Pour 1 litre of water inside the container (this is necessary
only before filling with salt for the first time).
The dishwasher is factory set at level 4.
If this level is not suitable for your area the softener should be
adjusted.
3. Using the funnel provided, pour in the salt until the
container is full.
Do not worry if water over flows from the unit when filling
with salt, this is quite normal.
Water hardness
PPM
(Parts per
Million)
Use of
salt
French
degrees
(°TH)
Clarke
degrees
E
L
Level
A
S
LT
A
S
LZ
A
S
L
E
S
0 - 80
0 - 6
0 - 8
9 - 14
NO
0
1
2
3
4
5
6
7
8
9
81 - 140
7 - 10
YES
YES
YES
YES
YES
YES
YES
YES
YES
141 - 200
201 - 300
301 - 400
401 - 500
501 - 600
601 - 700
701 - 800
801 - 1200
11 - 14
15 - 21
22 - 28
29 - 35
36 - 42
43 - 49
50 - 56
57 - 84
15 - 20
21 - 30
31 - 40
41 - 50
51 - 60
61 - 70
71 - 80
81 - 120
SR06
4. Replace the cap making sure that there is no trace of salt
on the screw thread or on the gasket.
5. Screw on the cap tightly.
The salt container will require topping up periodically.
If your water is level 0 it is already soft and therefore
there is no need to use salt.
With the setting of the water softener at level 0 the salt
indicator light on the control panel will always remain off.
Use salt from level 1 upwards.
You are reminded of this by the salt indicator light on the
control panel which comes on when the salt has finished.
The salt indicator light on the control panel can remain
illuminated for 2-6 hours after the salt has been
replenished, assuming the dishwasher remains switched
on. If you are using salts that take longer to dissolve then
this can take longer.
The adjustment of the water softener is possible only with
the machine in setting mode.
The operation of the machine is not affected.
To select a different level proceed as follows:
1. Press SELECTION and DELAY programme push buttons
simultaneously for about 5 seconds. In the display appears
an L followed by a number (e.g. L 4) which corresponds to
the current level.
SO432
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid
Use of detergent
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, and spot and streak free drying.
The dispenser, which is positioned inside the door, holds
about 110 ml of rinse aid, which is sufficient for 16 - 40
dishwashing programmes, depending upon the dosage
setting.
Only use detergents specifically designed for use in
dishwashers.
We recommend the use of Finish detergents which are
available in the following options:
Finish Double Action Tablets. Each tablet has the exact
amount of detergent required, simply place in the dispenser.
Filling with rinse aid
1. Open the container by turning the lid (A) anticlockwise.
Finish Powder recommended for every day use.
Finish Liquid Gel ideal for every day use. As the gel is extra
gentle it is recommended for fine bone china.
2. Add the rinse aid until the container is completely full.
The indicator (B) will be completely dark.
If using powder detergents proceed as follows:
1. Open the dispenser lid by pulling the catch (D).
2. Add the detergent according to the instructions given in the
Washing programmes chart.
As all detergents are not the same, you should also consult
the instructions on the packet.
3. Always close the lid.
4. If the programme has a prewash add a little amount of
detergent in the SID detergent dispenser, located in the
centre of the upper basket.
BR03
BR01
Follow the recommended quantity of detergent given in the
Washing programmes chart.
3. Top up the rinse aid when the rinse aid indicator light on
the control panel illuminates.
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid compartment.
Clean up any rinse aid spilt during filling with an absorbent
cloth to avoid excess foaming during the next wash.
Adjusting the dose
According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (C)
(position 1 minimum dosage, position 6 maximum dosage).
DE17
DE14
Increase the dose if there are drops of water or lime spots on
the dishes after washing.
If using detergent in tablets proceed as
follows:
Reduce it if there are sticky whitish streaks on the dishes.
1. For all programmes; place 1 tablet inside the detergent
dispenser.
2. Always close the lid.
3. For all programmes with prewash; place a portion of a
further tablet on the lid of the detergent dispenser.
Insufficient quantities of detergent will produce poor
washing results, whereas an excessive amount of
detergent will not improve washing results and is also
wasteful.
Using no more than the correct amount also contributes
to reducing pollution.
BR02
Compact detergents with enzymes
In these compact powders the environmentally unfriendly
components have been replaced by natural enzymes and
other more biodegradable substances.
The enzymes deploy their full dirt dissolving power at a
temperature as low as 50°C.
By choosing the BIO programmes you can therefore achieve
the same cleaning results that would otherwise be achievable
only with 65°C programmes and conventional detergents.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any scraps of
food, to avoid clogging the filters and consequently reducing
the performance.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking
together.
Do not load very small items which can fall through the
baskets.
Silver cutlery tends to go black if mixed with steel cutlery.
Place it in the cutlery basket separate from the others.
Open the door and slide out the baskets to load the dishes.
For best results we recommend to use the cutlery grids
provided (if the size and the dimensions of the cutlery allow it).
The cutlery basket is in two parts which can be separated to
give greater loading flexibility. To separate the two parts, slide
them horizontally in opposite directions and pull them apart. To
reassemble, reverse the procedure.
The lower basket
The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the upper spray arm can
turn freely.
UI62
UI63
UI48
UI21
The upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 25 cm in diameter), salad
bowls, cups and glasses.
The two rear rows of prongs on the lower basket can be easily
lowered to allow you to load pots, pans and bowls.
To lower the prongs:
Arrange items so that water can reach all surfaces.
- Slightly pull them upward and let them drop down
(see picture).
- To bring them back to the
standing position, just pull
them up again.
Glasses with long stems can be placed upside down in the
cup racks.
Light items (plastic bowls etc.) should be loaded in the upper
basket and arranged so they do not move.
UI86
US72
The cutlery basket
Long bladed knives stored in an upright position are a
potential hazard.
These items should only be placed in the removable knife
basket.
Take care when loading or unloading sharp items such as
knives.
In case that plates are loaded in the upper basket:
load them starting from the rear positions of the basket, tilting
them forwards and avoiding the front positions near the door.
Removable knife basket
Long and/or sharp items of cutlery such as carving knives
must be placed horizontally in the removable knife basket,
which is positioned at the rear of the upper basket.
US71
Attention!
Before closing the door, ensure that the spray arms can
rotate freely.
UI53
Cutlery should be placed in the removable cutlery basket with
the handles facing downwards.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the height of the upper
basket
If washing very large plates (over 27 cm and up to 32 cm in
diameter) you can load them in the lower basket after moving
the upper basket to the higher position.
Attention!
Never lift or lower the basket on one side only.
To move to the higher position proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards until the mechanism is
engaged and the basket is stable.
RC02
When the top basket is in the higher position it will only take
plates up to 20 cm in diameter and you will not be able to use
the cup racks.
To lower the basket to the original position proceed as
follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and the allow the
mechanism to drop back slowly, keeping hold of it.
Attention!
After loading your machine always close the door, as an
open door can be a hazard.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints and tips
To save energy
Items not suitable for dishwashers
Place dishes in the machine immediately after every meal and
wait until the dishwasher is full before washing.
The following items should not be washed in the dishwasher
(unless they are sold as dishwasher proof):
Do not prewash dishes under running water.
- Cutlery with wooden or horn handles or glued parts
- bronze cutlery
Select the DAILY 30I programme when dishes are not very
soiled, following the instructions given in the "Washing
programmes" chart.
- saucepans with wooden handles
- aluminium ware
Select the HALF LOAD option if only a few dishes need
washing. Remember to load the dishes in both baskets.
- crystal ware
- leaded glass
- plastic items
- antique or fine decorated china
For best washing results
Before loading, remove all scraps of food and soak very
heavily soiled pots and pans.
Certain types of decoration can discolour when washed in a
dishwasher.
Crystal-ware and plastic objects, if not guaranteed dishwasher
proof should be washed by hand.
Arrange saucepans, cups and glasses etc. upside-down.
Tilt items with convex or concave surfaces so that the water
drains off easily.
Certain types of glass can also become opaque
after being washed several times in a dishwasher.
Avoid contact between the dishes as far as possible.
A chemical reaction can occur between silver cutlery and
stainless steel cutlery. As a precaution, do not wash together.
Iron and cast iron objects can rust and stain other items.
Aluminium tends to go black, copper, pewter and
brass tend to stain.
If in doubt check with manufacturer of the item.
When buying new dishes, ensure that they are
dishwasher proof.
For best results we recommend the use of Finish detergents, rinse aid and salt.
P OURING
PACK
W
E
L
N
OUB
ION
T
C
E
A
D
L
I
Q
U
I
D
G
E
L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT
DE15
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Programme
Type of load
Recommended
quantity of detergent
Cycle
description
and
degree of soil
wash
prewash
1.
Any. Partial load (to be completed later
in the day)
1 cold rinse (to avoid food scraps
from sticking together)
/
/
Rinse and Hold
Hot prewash
Main wash up to 70°C
3 cold rinses
1 hot rinse
2.
Heavy soil.
Crockery, cutlery, pots and pans
20 g
20 g
10 g
10 g
Intensive 70°C
Turbo dry
Hot prewash
Main wash up to 65°C
2 warm rinses
1 hot rinse
3.
Normal soil.
Crockery, cutlery, pots and pans
Normal Plus 65°C
with prewash
Turbo dry
Hot prewash
Main wash up to 70°C
1 cold rinse
1 hot rinse
Turbo dry
4.
*
Normal soil.
Crockery and cutlery
20 g
30 g
20 g
10 g
Intensive 80I
Main wash up to 65°C
2 cold rinses
1 hot rinse
5.
Light soil.
Crockery and cutlery
/
Normal 65°C
no prewash
Turbo dry
Warm prewash
Main wash up to 50°C
2 cold rinses
1 hot rinse
Turbo dry
6.
**
Normal soil.
Crockery and cutlery
Bio 50°C
10 g
with prewash
7.
Main wash up to 50°C
2 cold rinses
1 hot rinse
Light soil.
Crockery and cutlery
Bio 50°C
no prewash
30 g
30 g
/
/
Turbo dry
Main wash up to 50°C
1 cold rinse
1 hot rinse
8.
Light soil.
Crockery, cutlery and party crockery
***
Quick Wash 50°C
Cold prewash
Main wash up to 45°C
2 cold rinses
1 hot rinse
9.
Normal soil.
Delicate china and crockery
Delicate 45°C
with prewash
25 g
5 g
Turbo dry
Cold prewash
Main wash up to 40°C
2 cold rinses
1 hot rinse
Light soil.
Crystal glass and delicate glassware
10.
25 g
20 g
/
5 g
Crystal 40°C
Turbo dry
11.
Fresh soil.
Crockery and cutlery
Main wash up to 60°C
1 hot rinse
****
/
/
Quick 30I
This is a programme both designed to
heat plates before serving or remove
dust from dishes which have not been
used for a long time
12.
1 hot rinse
Plate Warmer
Ideal for washing a complete load of 12 place settings with normal soil.
*
Characterised by a duration of about 80 minutes and a washing temperature of 70°C. The time value is approximated and depends on
the pressure and the temperature of the water and also by the variations of the power supply.
Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with enzymes, allows
to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C
programmes and conventional detergents. To compensate the lower temperature, the duration of the programme has been prolonged.
**
This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that you may re-
use them promptly
***
Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil).
****
Characterised by a duration of about 30 minutes and a washing temperature of 60°C. The time value is approximated and depends on
the pressure and the temperature of the water and also by the variations of the power supply.
This is the a daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and
cutlery.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating sequence
1. Check the filters
8a. Setting and starting the programme
without "delay start"
Ensure they are clean and properly positioned (see
"Maintenance and cleaning").
Press the "SELECTION" push button until the required
programme number appears in the digital display.
Select a drying option and/or half load (if desired).
Press the START push button, an audible signal advises
you that the programme has started.
2. Press the On/Off push button
The display will show the last selected programme and
the corresponding phase indicator lights will illuminate.
If the door is open also the "open door" indicator light
will illuminate.
The display will show the running time of the programme
and the indicator lights of the phases will turn off except
for the indicator light of the current phase.
The time in the digital display will start to decrease from
minute to minute.
Pressing the "SELECTION" push button while the
programme is running will display the number of the
current programme.
If the door is opened during the run of the programme
the current phase will be interrupted and the digital
display will show the number of the programme. The
indicator light of the interrupted phase will start to flash
and the indicator light "open door" will illuminate.
3. Check that there is rinse aid and salt
The corresponding indicator lights will illuminate if
refilling is necessary.
4. Load the dishes
Once the door is closed the programme will start from
the point where it was interrupted.
Remove any scraps of food.
Pull the lower basket out and arrange the saucepans,
plates and cutlery in it.
Pull the upper basket out and arrange the plates,
saucers, glasses and cups etc. in it.
Slide the baskets back into the machine.
8b. Setting and starting the programme
with "delay start"
Once a programme and required options (see point 8a)
have been selected to use DELAY proceed as follows:
5. Ensure that the spray arms can
rotate freely
Press the DELAY push button. The digital display will
show "h 0". Press the button again to select the number
of hours by which you wish to delay the programme start
(up to a maximum of 12 hours).
The delay start will not modify the settings made
previously .
To set the time setting to zero press the DELAY push
button until "h 0" appears in the digital display.
Press the START push button.
The digital display shows the delay time required before
the start of the programme that will decrease from hour
in hour.
6. Measure out detergent
Add the required amount of detergent into the dispenser.
Important!
If you select the half load option remember to reduce the
quantity of detergent.
Close the detergent dispenser lid.
The start of the countdown will be confirmed by the
flashing "h" in the digital display.
The phase indicator lights will turn off, only the indicator
lights of the options (drying and/or half load), if selected,
will remain on.
Once the delayed time has elapsed the programme will
start automatically.
7. The setting of the programme can
be done both with opened or closed
door
Opened door: select the programme and if necessary
the options (drying options, half load, delay start).
The START push button can be pressed before the
closure of the door (in this case the phase indicator
lights for that programme will turn off, except for the
indicator light of the first phase of the programme that
will flash continuously until the closure of the door).
Close the door and the programme will start
automatically.
If you desire to cancel a delay start in progress follow
the instructions given in the following chapter (point 9).
Opened door: select the programme and if necessary
the options (drying options, half load, delay start).
Close the door and press the START push button, the
programme will start automatically.
Closed door: select the programme and if necessary
the options (drying options, half load, delay start).
The start of the programme will only occur only after
having pressed the START push button.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
9. To cancel a programme in progress
Press the "START" push button for 5 seconds to cancel
the setting or the running of the current programme. An
intermittent audible signal will be heard and all the
indicator lights will turn off while in the digital display 3
horizontal lines will appear.
After 5 seconds the dishwasher will return to setting
mode.
It is now possible to select a new washing programme.
10. At the end of the washing
programme
The dishwasher will automatically stop and an
intermittent audible signal will be heard when the
programme has ended.
3 flashing horizontal lines will appear in the digital
display and all the indicator lights (drying phase
included) will turn off.
If the end of the programme has not occurred it will not
be possible to select a new one if the previous
programme has not been cancelled (see point 9).
Press the On/Off push button and open the door and
wait a few minutes before removing the dishes; in this
way they will be cooler and the drying will be improved.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
Important!
In general it is not advisable to open the door while the
machine is working; if the door is opened however, a
safety device ensures that the machine stops.
Care must be taken if the door is opened during the hot
phase or immediately after a programme has finished, as
steam may escape.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and cleaning
Internal cleaning
Ensure that the seals around the door, the detergent and rinse
aid dispensers are cleaned regularly with a damp cloth.
Check that the SID is not clogged with detergent residue. If
necessary rinse it under running water after having removed it
from the basket by twisting it anticlockwise and pulling it
upwards.
We recommend the use of Finish Dishwasher Cleaner every
3 months or run a 65°C wash without dishes using detergent.
Regular use of Finish Dishwasher Cleaner cleans inaccessible
parts, eliminates unpleasant food odours and helps prevent
the build-up of limescale.
Fasten it back onto the support by turning it clockwise.
Cleaning the central filter
(After each wash)
Scraps of food may accumulate in the drain filter (A) and
should be removed by rinsing the filter under running water.
To remove the drain filter
- simply pull it out by the handle.
MA12
Once cleaned, refit the filter by pushing it back to its original
position until it engages.
Never use your dishwasher without the SID dispenser.
Since SID also ensures correct distribution of the water to
the upper spray arm,
running the dishwasher without it will impair the washing
results.
A
External cleaning
Clean the external surfaces of the machine and control panel
with a damp soft cloth. If necessary use only neutral
detergents. Never use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc....).
MA04
MA19
Cleaning the large filter
(Every week)
If necessary clean the large filter (B) on both sides under
running water, using a brush.
To remove the large filter
1. Remove the spray arm by pulling it upwards on one side.
2. Turn the column (C) anticlockwise by 90° and then slide out
Prolonged periods of non-operation
If you are not using the machine for any period of time you are
advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of any
unpleasant smells.
4. Leave the inside of the machine clean.
the filter.
3. Once cleaned refit it following the above instructions in
reverse order.
4. Ensure the filter is in its original position, the handle of the
drain filter should be pointing towards the front of the
appliance.
Frost precautions
Avoid placing the machine in a location where the temperature
is below 0°C. If this is unavoidable, empty the machine, close
the appliance door, disconnect the water inlet pipe and empty
it.
90°
B
Moving the machine
If you have to move the machine (moving house etc....):
C
MA20
1. Unplug it.
MA05
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
MA21
MA18
The dishwasher must not be used without filters.
Incorrect repositioning and fitting of the filters will
produce poor washing results.
Cleaning the filters is vital to ensure correct operation of
the machine.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer.
The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems.
If the dishwasher will not start or stops during operation, all push buttons are inoperative except for the On/Off push button, all the
indicator lights turn off and in the digital display one of the following flashing fault codes will appear: AL1, AL2, AL3, AL4, AL5, AL6,
AL7, AL8.
Press the On/Off push button to switch off the dishwasher and carry out the following suggested corrective actions listed below.
Once the checks have been carried out switch on the dishwasher and start a washing programme, if the fault code reappears in
the digital display, contact your local Service Force Centre.
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will
be made, even if the appliance is in guarantee.
Symptom
Fault code
Solution
The machine will not start
G The door has not been properly closed. Indicator light
"open door" illuminates.
G The plug is not properly inserted in the power socket.
G There is a power failure.
The machine does not fill
with water
Indicator light
"water tap" flashes
and/or alarm AL5
G Ensure the water tap is open.
G Ensure the mains water supply has not been cut off.
G The inlet hose may be squashed or bent. Reposition the hose.
G The inlet hose may be blocked. Switch off the water supply
and clean the filter.
The dishwasher will not drain
Alarm AL6
G The drain hose may be squashed or bent. Reposition the
hose.
G The sink may be blocked. Clear any blockages.
G The drain hose extension is not correct. Follow the instructions
for connecting to the waste.
G There is no vent in the end of the drain hose.
Protection against flooding
is active
Alarm AL4
G Close the water tap and contact the Service Force Centre.
General
Alarms AL1, AL2,
AL3, AL7, AL8
G Switch off the dishwasher. Switch it back on and start the
programme. If the alarm reappears, call the local Service
Force Centre.
The machine is noisy
G Dishes are rattling against each other, refer to “Loading
your machine”.
G The spray arms are knocking against the dishes. Refer
to "Loading your machine".
The door is difficult to close
G The dishwasher is not level, or not properly built-in.
Visible lime deposits or
white film on the dishes
G Check that there is salt and that the salt cap is tight.
G Check that the right level of the water softener is setted.
The dishes are not quite dry
G The rinse aid has run out or too little is being used.
The dishes are not clean
(poor wash)
G The baskets are too full.
G The dishes have not been arranged properly.
G The spray arms do not rotate
G The spray arms are clogged.
G The filters are clogged.
G The filters are not in the correct position.
G Not enough detergent has been used or it is unsuitable.
G The detergent is old or has gone hard.
G The salt container cap is not properly closed.
G The washing programme selected is too gentle.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
If after all these checks, the problem persists, contact your
local Service Force Centre, quoting the model and serial
number. This information can be found on the rating plate
located on the right hand side of the dishwasher door (see
picture).
Prod.No. ........ Ser. No. .........
Mod. ........
RA01
Protection against flooding
The machine is fitted with a device in the bottom of the
machine to protect against flooding. The device will operate if
there are any water leaks in the machine, however it will only
operate if the machine is on.
In case of intervention the digital display will show "AL4". Turn
off the water tap and call the Service Force Centre.
Service and Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force
Centre by telephoning:
08705 929929
Your telephone call will be automatically routed to the Service Force centre covering your post code area.
For the address of your local Service Force Centre and further information about Service Force, please visit the website at
Before calling out an engineer, please ensure you read the details under the heading Something not working.
When you contact the Service Force Centre you will need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
4. The model and serial number (found on the rating plate)
5. The purchase date
Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee service calls.
Customer Care Department
For general enquiries concerning your Zanussi appliance or for further information on Zanussi products please contact our
Customer Care Department by letter or telephone at the address below or visit our website at www.zanussi.co.uk
Customer Care Department
Zanussi
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 727727 ( )
*
calls to this number may be recorded for training purposes
*
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee Conditions
Standard guarantee conditions
We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to be
defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE
for labour, materials or carriage on condition that:
G The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
G The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s instructions.
G The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not authorised by us.
G All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.
G Any appliance or defective part replaced shall become the Company’s property.
G This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case
a premium will be charged.
Exclusions
This guarantee does not cover:
G Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts
of glass or plastic.
G Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom.
G Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
G Products of Zanussi manufacture which are not marketed by Zanussi.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the
following qualifications:
G The guarantee starts from the date you first purchased your product.
G The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this
brand or range of products.
G This guarantee relates to you and cannot be transferred to another user.
G Your new home is within the European Community (EC) or European free Trade Area.
G The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household.
G The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will
then ensure that the local service Organisation is aware of your move and able to look after you and your appliances.
France
Senlis
+33 (0) 3 44 62 29 29
+49 (0) 800 234 7378
+39 (0) 434 39 4700
+46 (0) 8 672 53 90
+44 (0) 1753 219897
+353 (0) 14090753
Germany Nurnberg
Italy
Pordenone
Stockholm
Slough
Sweden
UK
Ireland
Dublin
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Test standard
EN 50242
Reference programme:
Load:
Programme 6 - Bio 50°C with prewash
12 standard place settings
position 5
Rinse aid selector:
Detergent dosage :
20 g in the dispenser
10 g on the dispenser lid
Arrangement lower basket
Arrangement upper basket
Arrangement cutlery basket
Arrangement knife basket
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
If you use a drain hose extension it must be no longer than 2
metres and its internal diameter must be no smaller than the
diameter of the hose provided.
Likewise the internal diameter of the couplings used for
connections to the waste outlet must be no smaller than the
diameter of the hose provided.
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or competent
person.
Remove all packaging before positioning the machine.
If possible, position the machine next to a water tap and a
drain.
Water supply connections
This dishwasher must be plumbed into a cold water supply.
The water pressure must be within the limits given in the
technical specifications (page 2).
+ 2 m max
CS14
Your local Water Authority will advise you on the average
mains pressure in your area.
The dishwasher features fill and drain hoses which can be
turned either to the left or the right to suit the installation.
Do not use, for the connection, old hoses which have
been used in another appliance.
The locknut must be correctly fitted to avoid water leaks.
Avoid bends or kinks in the hose which could prevent or slow
down the water supply.
If the machine is connected to new pipes or pipes which have
not been used for a long time, you should run the water for a
few minutes before connecting the inlet hose. This will prevent
deposits of sand or rust clogging the inlet hose filter.
Electrical connection
This appliance must be earthed.
The manufacturer declines any responsibility should this
safety measure not be observed.
If the plug that is fitted to your appliance is not suitable for the
socket, it must be cut off and the appropriate plug fitted.
Important
The wires on the mains lead are coloured in accordance with
the following code:
Green and Yellow - Earth
Blue
- Neutral
- Live
Brown
Water outlet hose connection
The end of the drain hose can be connected in the following
ways:
If you fit your own plug, the colours of the wires in the mains
lead of your appliance may not correspond with the markings
identifying the terminals in your plug.
1. To the sink outlet spigot, securing it if necessary with a clip.
2. To a stand pipe provided with vent-hole, minimum internal
diameter 4 cm.
E
1
2
L
N
CS13
CE04
The waste connection must be at a height of between 30 cm
(minimum) and 100 cm (maximum) from the bottom of the
dishwasher.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the terminal
The drain hose can face either to the right or left of the
dishwasher
in the plug which is marked with the letter "E" or the earth
symbol
or coloured green and yellow.
Ensure the hose is not bent or squashed as this could prevent
or slow down the discharge of water.
2. Connect the Blue (neutral) wire to the terminal in the plug
The sink plug must not be in place when the machine is
draining as this could cause the water to siphon back into the
machine.
which is marked with the letter "N" or coloured black.
3. Connect the Brown (live) wire to the terminal in the plug
which is marked with the letter "L" or coloured red.
Attention!
The plug moulded onto the lead incorporates a 13amp BSI362
fuse. Only ASTA or BSI fuses should be used.
Our appliances are supplied with a security device to
protect against the return of dirty water back into the
machine.
If the spigot of your sink has a "no return valve"
incorporated this can prevent the correct draining of your
dishwasher.
The plug must not be used if the fuse cover/carrier is lost. The
cover/carrier is indicated by the coloured insert at the base of
the plug.
A replacement cover/carrier must be obtained from your local
Service Force Centre.
We advise you therefore to remove it.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Electrolux Group. The world’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen,
cleaning and outdoor use. More than 55 million Electrolux Group products (such as
refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year
to a value of approx. 14 billion USD in more than 150 countries around the world.
©
Subject to change without notice
Electrolux plc 2002
1 08/02
Download from Www.Somanuals.com. All Manuals Search And Download.
|