UA
DVD CHANGER
LECTEUR DE DVD CHANGEUR
DVD-C740
OWNER’S MANUAL
MODE D’EMPLOI
NATURAL SOUND DVD PLAYER
STANDBY
ON
DISC
PLAY CHANGE
PROGRESSIVE
1
2
3
4
5
REPEAT
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC INFORMATION (for US customers)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly
approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the
USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices.
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not
result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used accord-
ing to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with
FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference,
which can be determined by turning the product "OFF" and "ON", please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial
type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you
can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6600 Orangethorpe Ave. Buena Park, CA90622.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying
blaring or distortion - and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic
Industries Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive
volume levels.
For Customer Use:
CAUTION
-
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM.
Read carefully the information located at the rear panel of the
player and enter below the Serial No. Retain this information for
future reference.
CAUTION VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM.
Model No.
Serial No. __________________________
U.S.A. model
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
PRODUIT LASER DE CLASSE 1
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide slot and
fully insert.
This Class B digital apparatus complies with Canadian ICES-003.
CAUTION
-
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM.
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.
CAUTION VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM.
Australia model
WARNING
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
PRODUIT LASER DE CLASSE 1
TO REDUCETHE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSETHIS UNITTO
RAIN OR MOISTURE.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
To assure the finest performance, please read
this manual carefully. Keep it in a safe place for
future reference.
14 Do not attempt to modify or fix this unit.
Contact qualifiedYAMAHA service personnel
when any service is needed.The cabinet should
never be opened for any reason.
15 When not planning to use this unit for long
periods of time (i.e., vacation), disconnect the AC
power plug from the wall outlet.
16 Be sure to read the “Troubleshooting” section on
common operating errors before concluding
that this unit is faulty.
17 Before moving this unit, press STANDBY/ON to
set the unit in standby mode, then disconnect
the AC power plug from the wall outlet.
Install this unit in a well ventilated, cool, dry, clean
place — away from direct sunlight, heat sources,
vibration, dust, moisture, or cold. In a cabinet,
allow about 2.5cm (1 inch) of free space all
around this unit for adequate ventilation.
Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
Do not expose this unit to sudden temperature
changes from cold to hot, nor locate this unit in
an environment with high humidity (i.e., a room
with a humidifier) to prevent condensation inside
this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
Avoid installing this unit in a location where
foreign objects may fall onto this unit or where
this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause
damage and/or discoloration on the surface
of this unit.
3
4
The unit is not disconnected from the AC power
source as long as it is connected to the wall
outlet,even if this unit itself is turned off.This state is
called the standby mode.In this state,this unit is
designed to consume a very small quantity of power.
5
NOTE:
Pictures shown maybe different between countries.
Never make or change connections with the power
switched on.
– Burning objects (i.e., candles), as they may
cause fire, damage to this unit, and/or
personal injury.
LASER SAFETY
This unit employs a laser. Due to possible eye injury,
only a qualified service person should remove the
cover or attempt to service this device.
– Containers with liquid in them, as they may
fall, spilling the liquid and causing an electrical
shock to the user and/or damage to this unit.
Do not cover this unit with a newspaper,
tablecloth, curtain, etc. in order not to obstruct
heat radiation. If the temperature inside this unit
rises, it may cause fire, damage to this unit, and/or
personal injury.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN.AVOID EXPOSURETO BEAM
6
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
7
8
9
Do not plug in this unit to a wall outlet until all
connections are complete.
Do not operate this unit upside-down. It may
overheat, possibly causing damage.
Do not use excessive force on switches, knobs
and/or cords.
This unit is designed for home use only. Do not use
this unit for business purposes.
Be sure to place this unit on a level surface.
If not so, this unit will fail to work normlly at the
PLAYXCHANGE operation and cause damage to
the disc(s) and this unit itself.
10 When disconnecting the power cord from the
wall outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12 Use only the voltage specified on this unit. Using
this unit with a higher voltage than specified is
dangerous and may cause fire, damage to this
unit, and/or personal injury.YAMAHA will not be
held responsible for any damage resulting from
use of this unit with a voltage other than as
specified.
LASER
Type
Wave length
Semiconductor laser GaAlAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
Output Power
10 mW (VCD/CD)
Beam divergence 60 degree
13 To prevent damage by lightning, disconnect the
power cord from the wall outlet during an
electrical storm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Features.....................................................17
Moving to another title/chapter................................17
Search.......................................................................................17
Slow Motion.........................................................................17
Still Picture and Frame-by-frame playback..........17
Scan...........................................................................................17
Repeat......................................................................................18
Repeat A-B............................................................................18
Shuffle Across All Discs..................................................18
Time search ..........................................................................18
Zoom.......................................................................................18
Favorite Track Selection Across Disc ....................19
FTS for a Single disc.........................................................19
MP3 Disc Features..................................................20
Album/Title Playback.......................................................21
Repeat track/album/Disc...............................................21
Introduction
Supplied accessories..................................................2
Notes about discs......................................................2
Cleaning discs..........................................................................2
Symbols Used in this Manual...................................2
Functional Overview
Front Panel ..................................................................3
Rear Panel....................................................................4
Remote Control.........................................................5
Preparation
General Notes on connections ..............................6
Digital Connections...................................................6
Analog Connections.................................................6
Video Connections....................................................6
S-Video jacks...........................................................................7
Component Video jacks...................................................7
Composite Video jacks.....................................................7
Inserting batteries into the Remote Control ......8
Using the Remote Control.............................................8
NTSC/PAL Conversion ............................................8
Switching On...............................................................8
Menu Bars on TV Screen .........................................9
Temporary Feedback Field Icons.................................9
User Preference Settings..........................................9
General operation................................................................9
Picture......................................................................................10
Sound.......................................................................................11
Language.................................................................................13
Features...................................................................................13
Other Feature......................................................................13
Access Control
Child Lock.................................................................22
Activating/deactivating the Child Lock..................22
Authorising discs................................................................22
Deauthorising discs...........................................................22
Parental Control......................................................22
Activating/Deactivating Parental Control.............23
Country...................................................................................23
Changing the 4-digit code ............................................23
If you forget your 4 digit code...................................23
Parental Control Disclaimer........................................23
Troubleshooting ........................ 24
Specifications ............................. 25
Operation
Basic Playback .......................................................... 14
Playing a DVD-Video.............................................. 14
Playing a title.........................................................................14
Resume....................................................................................14
Video CD and Super Video CD.......................... 15
Playing a disc.........................................................................15
Playing an Audio CD .............................................. 15
Playing a disc.........................................................................15
Special DVD Features............................................ 16
Title/Disc menu..................................................................16
Camera Angle......................................................................16
Changing the audio language......................................16
Subtitle Language...............................................................16
Special VCD & SVCD Features............................ 16
Playback Control (PBC).................................................16
Special CD & MP3 Features.................................. 16
CD text and MP3 text...................................................16
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing this YAMAHA DVD
player. This Owner’s Manual explains the basic
operation of this DVD player.
Symbols Used in this Manual
The below symbols appear in some headings and
notes with the following meanings:
Supplied accessories
– Remote control
– Description refers to playback of
DVD-video discs
DVD
– Batteries (two AA size) for remote control
– Audio/Video cable
– Description refers to playback of
Video CDs
VCD
– Owner’s Manual
– Description refers to playback of
Audio CDs
CD
Notes about discs
Helpful Hints!
– This unit is designed for use with DVD video,
Video CD, Super video CD, Audio CD (CD text
supported), CD-R and CD-RW (MP3 Supported),
DVD+RW and DVD+R.
– CD-R and CD-RW cannot be played unless
finalized.
– Some discs cannot be played depending on the
disc characteristics or recording conditions.
– Be sure to use only CD-R and CD-RW discs made
by reliable manufacturers.
● Some DVD video discs require specific
functions or allow only limited functions
during playback.
● “ Ä” may appears on the TV screen
which means that the function is not
available on that specific DVD video disc.
– Do not use any non standard shaped discs (heart,
etc.)
– Do not use disc with tape, scals, or paste on it,
damage to the unit may result.
– Do not use a disc printed on its surface by a
commercially available label printer.
Cleaning discs
● When a disc becomes dirty, clean it with a
cleaning cloth. Wipe the disc from the centre out.
Do not wipe in a circular motion.
● Do not use solvents such as benzine, thinner,
commercially available cleaners, or antistatic spray
intended for analogue records.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
”DTS” and ”DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Front Panel
STANDBY/ON
– to switch the player to standby mode
or ON
/ OPEN/CLOSE
Disc Tray
– to open/close the disc tray
– load up to 5 discs on the disc tray
NATURAL SOUND DVD PLAYER
STANDBY
ON
DISC
PLAY CHANGE
PROGRESSIVE
1
2
3
4
5
REPEAT
DISPLAY
– shows the current status of the player
S/Q
– search backward* / go to a previous
chapter or track
DISC (1, 2, 3, 4, 5)/LEDs
– to select and directly playback the
preferred disc / each LED flashes green
when button is selected
R/T
– search forward* / go to the next
chapter or track
LEDs
B; PLAY/PAUSE
– LED lights up when the corresponding
feature is set to ON
– to start or interrupt playback
9 STOP
– to stop playback
PLAYXCHANGE
– to change another disc(s) during
playback
* Press button for about two seconds.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Rear Panel
VIDEO OUT - COMPONENT
– connect to COMPONENT VIDEO
input of your AV receiver
AC Power Cord
VIDEO OUT - VIDEO
– connect to a standard AC outlet
– connect to VIDEO (composite)
input of your AV receiver
Progressive / Interlace SELECTOR
(NTSC only)
SUBWOOFER
– connect to an active subwoofer
– to switch between Progressive or
interlace depending on your monitor
VIDEO
SUB WOOFER
Y
PB
480p
480i
R
PR
COAXIAL
PCM
OPTICAL
SCAN MODE
S
VIDEO
COMPONENT
1
2
DIGITAL DTS
DIGITAL OUT
VIDEO OUT
AUDIO OUT
VIDEO OUT - S VIDEO
– connect to S VIDEO input of your
AV receiver
AUDIO OUT
– connect to AUDIO inputs of your AV
receiver or stereo system
DIGITAL OUT - OPTICAL
– connect to OPTICAL input of your
AV receiver
DIGITAL OUT - COAXIAL
– connect to COAXIAL input of your
AV receiver
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the player.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Remote Control
DISC SKIP
– to select another disc
B/ I
DISC SKIP
DIMMER
T
C
SOUND MODE
– switch DVD player ON or go
to standby mode
DIMMER
– to select 4 different
brightnesses for the display
1
2
5
8
0
3
6
9
0-9 numerical keys
– select numbered items in a
menu
4
7
T/C
– select title/chapter
RETURN RESUME
CD TEXT BIT RATE
SOUND MODE
– selects required sound mode
Stereo, Dolby Surround-
MENU
ON SCREEN
CD TEXT/BIT RATE
– activate/deactivate CD text if
available on the disc (audio
CDs)
ENTER
OK
compatible or 3D sound
– to display bit rate indicator
during playback (DVD, SVCD)
STOP
PLAY
PAUSE
RETURN/RESUME
– go back to previous menu /
continue playback after play
was stopped
SUBTITLE ANGLE ZOOM AUDIO
ON SCREEN
– access or remove player’s
system menu
REPEAT
A
B
SHUFFLE
SCAN
MENU
– access menu of a DVD disc
T
– search forward* / next
chapter or track
1, 2, 3, 4
– (left/right/up/down) select an
item in the menu
STOP ( 9 )
– stop playback
ENTER/OK
– acknowledge menu selection
PLAY ( B )
– start playback
S
– search backward* / go to a
previous chapter or track
PAUSE ( ; )
– pause playback temporarily /
frame-by-frame playback
REPEAT
– repeat chapter, track, title, disc,
all discs
SUBTITLE
– subtitle language selector
ANGLE
– select DVD camera angle
A-B
– repeat a specific segment
ZOOM
– enlarge video image
SHUFFLE
– play tracks in random order
AUDIO
– audio language / format /
sampling selector
SCAN
– play the first 10 seconds of each
track/chapter within a disc
* Press and hold button for about two seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Preparation
Notes:
General Notes on connections
– If the audio format of the digital output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at
all. Make sure to select the appropriate audio
format at menu screen included on the disc.
Pressing AUDIO once or more may change not only
audio languages but also audio formats, and the
selected format appears for several seconds on the
status window.
Never make or change connections with the
power switched on.
● Depending on the equipment you wish to
connect, there are various ways you could
connect this player. Possible connections are
shown in the following drawings.
● Please refer to the manuals of other equipment as
necessary to make the best connections.
● Do not connect this player via your VCR. The
video quality could be distorted by the copy
protection system.
– MP3 Audio is not available on the Digital Output.
Analog Connections
● Do not connect this player’s audio out jack to the
phono in jack of your audio system.
Use audio/video cable supplied with this player to
connect the AUDIO OUT L (left) and R (right)
jacks to corresponding input jacks of your audio
equipment such as Stereo amplifier. You can
connect a subwoofer to the SUBWOOFER jack.
Digital Connections
This player has COAXIAL and OPTICAL digital
out jacks. Connect one or both of them to your
AV receiver equipped with Dolby digital, DTS, or
MPEG decoder using each specific cable (separate
purchase).
VIDEO
SUB WOOFER
Y
PB
480p
480i
R
PR
COAXIAL
PCM
OPTICAL
DIGITAL
SCAN MODE
S
VIDEO
COMPONENT
1
2
DTS MPEG
DIGITAL OUT
VIDEO OUT
AUDIO OUT
Y
R
L
PB
480p
480i
R
PR
COAXIAL
PCM
OPTICAL
DIGITAL
SCAN MODE
S
VIDEO
COMPONENT
1
2
DTS MPEG
DIGITAL OUT
VIDEO OUT
AUDIO OUT
C
O
AV receiver
Speakers
COAXIAL
IN
OPTICAL
IN
Subwoofer
R
L
1
CD/DVD
Stereo
amprifier
R
L
Left
speaker
Right
speaker
You will need to set this player’s digital
output to ALL (see ‘User Preference
Settings’).
Video Connections
If your AV receiver has video output jacks,
connect your receiver (and then to your TV) so
that you can use one TV for several different
video sources (LD, VCR etc.) by simply switching
the input source selector of your receiver.
The player has three types of video output jacks.
Use one of them in accordance with the input
jacks of the equipment to be connected.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Use commercially available coaxial cables.
S-Video jacks <A>
Receiver (and TV) with component input is
required. Observe the color of each jack when
connecting. If your receiver does not have
component output jacks, connecting the player’s
component output directly to your TV’s
component input can reproduce better video
image.
S (separate) video connection achieves a clearer
picture than composite video connection by
separating color and luminance when transmitting
signals. Use commercially available S-video cable.
Receiver (and TV) with S-video input is required.
Component Video jacks <B>
Component video connection achieves high
fidelity in reproducing colors (better performance
than S-video connection), separating video signal
into luminance (Y, terminal color-coded as green),
and color difference (Pb, blue/Pr, red).
Composite Video jacks <C>
Use audio/video cable supplied with this player
when connecting the player to a TV.
VIDEO
SUB WOOFER
SCAN MODE selector
Y
This switch will change the type of NTSC signal
output from the Pr/Cr Pb/Cb Y VIDEO OUT on
the player.
PB
PR
480p
480i
R
COAXIAL
PCM
OPTICAL
DIGITAL
SCAN MODE
S
VIDEO
COMPONENT
1
2
DTS MPEG
DIGITAL OUT
VIDEO OUT
AUDIO OUT
480p:
Select progressive when you have a TV that can
accept progressive signals to enjoy accurate
colour reproduction and high quality images.
SCAN MODE
Selector
V
S
<A>
<B>
<C>
480i:
PR/CR
PB/CB
Y
Select this setting when connected to a standard
(interlace format) TV.
S VIDEO
COMPONENT
VIDEO
VIDEO
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
AV receiver
S VIDEO
OUT
COMPONENT
VIDEO
VIDEO OUT OUT
DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE “STANDARD
DEFINITION” OUTPUT. IF THERE ARE
S VIDEO
IN
COMPONENT
VIDEO IN
VIDEO
IN
QUESTIONS REGARDING OUR VIDEO
MONITOR COMPATIBILITY WITH THIS
MODEL 525P DVD PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line of
YAMAHA projectors, including the DPX-1, LPX-
500, PDM-1 and DPX-1000.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Inserting batteries into the
Remote Control
NTSC/PAL Conversion
DVD discs are recorded according to color
system eg. NTSC and PAL. Your TV also operates
according to a color system.
This DVD player is compatible with NTSC and
PAL. To play on this DVD player, the color
system of the DVD disc, the TV and the DVD
player should match. If all three are not the same,
the DVD may play in only black and white, the
picture may roll continuously or the picture may
appear distorted.
1
2
Open the battery cover.
Insert batteries (AA size) with the correct polarity
as indicated by the + and - symbols inside the
battery compartment.
3
Close the cover.
-
+
To activate the conversion, refer to page 11.
+
-
Switching On
1
2
3
Connect the AC power cord to the power outlet.
Switch on the TV and DVD player.
Select the correct input channel at your TV and
set the input source at your AV receiver to DVD.
● The player display lights up and the default
screen appears on the TV.
If you are using an external equipment (eg. audio
system or receiver), turn them on and select the
appropriate input source that was used to
connect to the player output. Refer to the
equipment owner’s manual for detail.
CAUTION!
– Remove batteries if they are exhausted or
not to be used for a long time.
– Do not use old and new or different types
of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly and
kept away from children.
4
Using the Remote Control
● Direct the remote control at the remote sensor
of the player.
● Do not drop the remote control.
● Do not leave the remote control near extremely
hot or humid places.
Note:
– If you do not have a proper picture or sound, refer
to ‘Troubleshooting’ section.
● Do not spill water or put anything wet on the
remote control.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Temporary Feedback Field Icons
Menu Bars on TV Screen
These icons will appear on the top left hand
corner of your TV screen.
● Operations can be carried out directly via the
multiple menu bars on the TV screen.
● The following functions are available via the menu
bars. Pressing ON SCREEN repeatedly will toggle
through menu bar 1, menu bar 2, menu bar 3 and
menu bar OFF:
Scan
Repeat A to end
Repeat A–B
Angle
Repeat all discs
Repeat disc
RepeatTitle
RepeatTrack
Repeat Chapter
Shuffle all discs
Menu bar 1
Child Lock On
Child Safe
From the left,
Resume
User Preference Settings ●
Current Subtitle Language ●
Current Audio Language ● Smart Color ●
Sound Mode
Action Prohibited
Movie only
Shuffle
Music only
Shuffle Repeat
PlayXchange
The following functions are available with
activated disc via the menu bars:
Menu bar 2
User Preference Settings
In the User Preference Settings menu, you can
customize your player to suit your own particular
requirements.
From the left,
Frame by Frame ● Slow Motion ● Scan Speeds
● Camera Angle ● Enlarge Picture
General operation
Press ON SCREEN on the remote control.
Menu bar 3
1
2
3
The
will be highlighted in the menu bar.
Press 4to activate the Personal Preferences
menu.
From the left,
Disc ● Title ● Chapter ● Time Search ●
Favorite Track Selection
To select a preferred menu language,
1
2
Press 4until ris highlighted.
Press 2to enter the submenu and 4to choose
Menu language.
3
Use 3/4to select your preferred menu language.
For navigation and selection in Personal
preferences,
1
2
Use 1, 2, 3, 4to toggle through the functions
and select your preferred option.
Press ENTER/OK to confirm a highlighted
selection.
The following items are available:
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
– Monitor Type
Picture
Allows you to select the type of display device
that is connected to this unit.
– TV Shape
In each device, a set of predefined Colour settings
is available or choose Personal that allows you to
select the colour settings according to your
preference.
Select the aspect ratio of the TV to be connected.
16:9 ● when you connect a wide-screen TV to
this player.
4:3 LETTER BOX ● when you connect a
normal TV to this player. Displays a wide picture
with black bands displayed on the upper and
lower portions of the TV screen.
1en
TV shape
1en
1
2
1 TV
4:3 PAN SCAN ● when you connect a normal
TV to this player. Displays the wide picture on the
whole TV screen with a portion automatically cut
off.
Black Level shift
Monitor Type
Video shift
2 Plasma TV
3 Projector
4 Projection TV
– Video shift
Use this setting to personalize the position of the
picture on your TV by scrolling it to the left or
right.
16:9
4:3
Letter Box
1en
TV shape
1en
1
2
Black Level shift
Monitor Type
Video shift
4:3
Pan Scan
OK to exit
– Color settings
You can select one of five predefined sets of color
settings and one set (Personal) which you can
define yourself.
Note:
– Pan Scan is subject to availability on the disc.
– Black level shift (NTSC output only)
Select On for adapting the color dynamics to
obtain richer contrasts.
1en
TV shape
1en
1
2
1 Personal
2 Rich
Black Level shift
Video shift
3 Natural
4 Soft
1en
TV shape
1en
1
2
Colour settings
● When Personal is selected it allows you to fine-
tune saturation, brightness and contrast.
● Use 3or 4to adjust the values of these
parameters. Press ENTER/OK or 1to exit.
Black Level shift
Video shift
On
Off
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
– TV System (NTSC/PAL Conversion)
Sound
Allows you to select between PAL, NTSC and
AUTO mode depending on your TV.
– Digital output
The conversions supported are as follows:
● Digital output selection enables you to specify the
type of digital output suitable for your receiver.
● Select ALL (default setting), if you had connected
your DIGITAL AUDIO OUT to a multichanel
decoder receiver.
● Select PCM only if your receiver is not capable of
decoding compressed/encoded input stream.
● Select OFF to deactivate the DIGITAL AUDIO
OUT.
Disc
Output format
Selected mode
Type
Format
NTSC
PAL
AUTO
NTSC
PAL60
NTSC
PAL
NTSC
DVD
VCD
Not
Supported
PAL
PAL60
PAL
PAL
NTSC
NTSC
NTSC
PAL
NTSC
PAL
1
2
In the Personal Preferences Menu, select TV
System.
Note:
Press 3or 4to select PAL, NTSC or AUTO.
– Digital output is not available for MP3 discs.
Notes:
– If you have a PAL only TV, ensure that your TV
System setting is PAL.
– AUTO can only be selected when using a TV that
supports both the NTSC and PAL systems
(multisystems).
1en
1en
1
2
Digital output
Analog output
Night mode
Off
PCM only
All
– This setting is applicable for CVBS output on cinch
only.
– Analog output
– Slight picture distortions may occur due to this
conversion. This is normal. Thus, the AUTO format
is most suitable for the best picture quality.
Select Stereo, Dolby Surround-compatible or 3D
Sound.
Stereo: In this setting, the 5.1 audio channels are
down-mixed to a stereo signal. Select this setting
when connecting to a TV, stereo amplifier/
receiver, etc.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Dolby Surround-compatible: Select this setting
when using an equipment with a Dolby Surround
Pro Logic decoder. In this setting, the 5.1 audio
channels (Dolby Digital, MPEG-2, DTS) are
downmixed to a Dolby Surround-compatible 2-
channel output.
3D-Sound: In a setup without rear speakers
(analog stereo output), 3D Sound remixes the six
channels of digital surround into a two-speaker
output while retaining all of the original audio
information. The result is the listening sensation of
being surrounded by multiple speakers.
– PCM Output
Allows to select PCM digital output between
48kHz and 96kHz. When 48kHz has been
selected, 96kHz PCM data, (if available on disc)
will be converted to 48kHz.
Some 96kHz DVD are copy protected. If your
PCM output selection is 96kHz, the digital output
is downsampled to 48KHz.
– Sub-woofer Cut-off
The frequency of the subwoofer output can be
set to High (200Hz) or Low (100Hz) to match
your system’s playback sound quality.
During DVD or Video-CD playback, these values
can be selected directly with SOUND MODE.
1en
1en
1
2
Digital output
Analog output
Night mode
Stereo
Dolby Surr-compat
3D sound
Karaoke vocal
– Night Mode
When set to ON, the dynamics of your sound
output are optimized. High volume outputs are
softened, enabling you to watch your favorite
action movie, etc. without disturbing others.
– Karaoke vocal
Put this setting to ON only when a multi-channel
karaoke DVD is being played. The karaoke
channels on the disc will then be mixed into a
normal stereo sound.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
– Smart Power OFF
Language
Puts the set to standby after a predefined time.
This can be set to Enabled or Disabled.
Selecting disc languages:
Menu/Audio/Subtitle language
– Wake-up Timer
● This is to select the audio language, subtitle
language and the language used in TV screen
menus or DVD menus which will always be used
for every disc to be played back.
● If the language selected is not available on the disc,
the default language designated by each disc will
be selected.
The wake-up timer allows your player to turn on
after a preset time. Whenever the player wakes
up, the value of wake up timer is set to zero
automatically. The Wake-up Timer will activate
when the set is switched to standby-mode.
Beeper
450
480
510
540
Help text
Smart Power off
Wake up timer
Features
– Access Control
– IntelliPlay
Access Control contains the following features:
Child Lock - When Child Lock is set to ON, a 4-
digit code needs to be entered in order to
playback discs.
Parental control - Allows the conditional
presentation of DVDs containing Parental
Control information (see ‘Access Control’ section).
Intelliplay is a convenient feature for automated
playback of disc content.
When switched to “ON”, the playback will
automatically play only disc with similar content
(either audio or video) to previous disc while
skipping the rest content.
For example, when a CD was played previously,
the player will search for the next audio disc in the
tray sequence (CD or MP3 disc). (● Music only)
Pressing the Disc Direct Access to a disc other
than a music disc when IntelliPlay is set to ON, will
change to video mode. (● Movie only)
– Status Window
Displays the current status of the player and
appears with the menu bar. When disc playback
is stopped, it is displayed with the ‘Temporary
Feedback Field’ in the default screen. See ‘On-
Screen Display’ information;
IntelliPlay
On
Factory setting is ON. Select OFF to suppress
display of the Status Window.
Off
Other Feature
– Bit Rate Indicator
Press CD TEXT/BIT RATE to activate the bit rate
indicator. When activated, the bit rate for video
and audio, as well as the total bit rate is displayed.
This is only applicable during playback of
DVD and SVCD discs.
– PBC (Playback Control - for VCD)
The Playback Control can be set to ON or OFF
(see section “Special VCD & SVCD Features” for
details).
– Beeper
The beeper can be set to ON or OFF.
– Help text
When set to ON, help text describes the icons
selected. Select OFF if you no longer require the
help text.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Basic Playback
Playing a DVD-Video
1
2
Press STANDBY/ON on the front panel.
Press OPEN/CLOSE /on the front panel to
open disc loading tray.
● DVD video discs may have one or more TITLES,
and each TITLE may have one or more
CHAPTERS.
3
4
Place the chosen discs in the tray, with the label
facing up.
Press PLAY B.
● Playback stops at the end of each TITLE.
DVD-VIDEO DISC
● The disc tray closes and playback starts
automatically with all the loaded discs on the tray
in sequence.
TITLE 1
TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2
CHAPTER 3
5
To stop playback, press STOP.
NATURAL SOUND DVD PLAYER
STANDBY
ON
Playing a title
1
Press DISC (1, 2, 3, 4, 5) on the front panel or
DISC SKIP repeatedly on the remote control to
playback a specific disc directly.
● Playback starts automatically.
2
3
4
When the MENU appears on the TV screen, use
4, 3, 1, 2or numerical keys on the remote
control to select an option and continue playback.
If the titles are numbered , press the numerical
keys or use 3/4to select desired title in the
menubar.
● To playback a specific disc directly, press DISC
SKIP repeatedly on the remote control or one of
the DISC (1, 2, 3, 4, 5) on the front panel.
● Press PLAYXCHANGE on the front panel to
open the disc tray and reload or unload any discs
without interrupting current disc playback.
● Playback will stop after all discs have been played.
● When the disc tray is open, pressing PLAY,
OPEN/CLOSE, PLAYXCHANGE, DISC (1, 2, 3,
4, 5) will close the disc tray automatically.
To stop playback, press STOP.
Resume
The playback of a disc can be interrupted at any
point and then resumed from the point where the
playback was last stopped.
Notes:
– DVDs may have a region code. Your player will
not play discs that have a region code different from
the region code of your player. The region code of
this player is stated on the rear panel.
– If ‘Child Lock’ is set to ON and the disc inserted
is not authorized, the 4-digit code must be entered
and/or the disc must be authorized (see ‘Access
Control’).
1
2
Press STOP to interrupt playback.
● The help line text appears “Press Stop again to
start from beginning” for 5 seconds.
Pressing PLAY will automatically resume playback
from the point where playback was interrupted.
OR
● Press STOP again and then press PLAY,
● Playback will starts from the beginning of the
discs.
● If you press PLAY when resume icon appears on
the screen, resume playback starts from the point
where playback was interrupted.
Note:
– Resume feature is also applicable to VCDs and
SVCDs.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Video CD and Super Video CD
Playing an Audio CD
The current VCD 2.0 and Super Video CD 1.0
standard features are:
● Audio CDs contain only TRACKS.
● They can be played on your DVD player with the
audio output connected to a stereo system or to
your TV.
● If CD-text is available on the disc, it will be
displayed on both the TV screen and player’s
front display.
● Select tracks using the menubar on the TV screen
or by pressing the numerical keys directly.
● Your DVD player also allows you to compile
Favorite Track Selection (FTS) programs for your
discs by selecting or excluding tracks of your
choice (see FTS Program - Audio CDs).
Support following VCD and SVCD formats:
Features
Video CDs 2.0
MPEG-1
SuperVideo CDs 1.0
MPEG-2
Video
bit rate
resolution NTSC
resolution PAL
constant 1,150 Kbps
352x240, 29.97Hz
352x288, 25Hz
variable up to 2.6 Mbps
480x480 interlaced, 29.97Hz
480x576 interlaced, 25Hz
Still picture (photo)
resolution NTSC
resolution PAL
MPEG-1
352x240, 704x480
352x288, 704x576
MPEG-2 (1 Frame)
480x480, 704x480
480x576. 704x576
Audio
MPEG-1 layer II
44.1KHz
MPEG-1 layer II
44.1KHz
sampling
bit rate
224Kbps
32-384Kbps
audio channels
surround sound
1 stereo / 2 mono
Stereo with Dolby Pro-Logic
< 2 stereo / 4 mono
MPEG-1 (5+1) extension
Overlay graphics/text
sub-channels
coding
overlay video plane
<= 4
4 colour CLUT (2bits/pixel)
AUDIO CD
Following formats can’t be supported in
VCD:
TRACKS
1
2
3
4
5
6
7
8
9
10 11 12 ...
– HQ-VCD is encoded at 2.4Mbps or 2.6Mbps
– XVCD (eXtended VCD) with higher resolution
and data rate.
Playing a disc
● Video CDs may have one or more TRACKS, and
TRACKS may have one or more INDEXES.
● To make easy and convenient access, you can
move between TRACKS and INDEXES.
1
Press DISC (1, 2, 3, 4, 5) on the front panel or
DISC SKIP repeatedly on the remote control to
playback a specific disc directly.
● Some Video CDs have Play Back Control (PBC),
which is a predefined playback sequence stored
on the disc (see “Playback Control” section).
● Playback starts automatically.
● The TV screen will display the number of
tracks for selection and current playing status.
At the end of the disc, playback of the next
available disc starts. Playback stops after all the
discs are played back.
2
3
VIDEO CD
TRACK 1
INDEX 2
TRACK 2
INDEX 2 INDEX 3
INDEX 1
INDEX 1
To stop playback, press STOP.
Playing a disc
1
Press DISC (1, 2, 3, 4, 5) on the front panel or
DISC SKIP repeatedly on the remote control to
playback a specific disc directly.
● Playback starts automatically.
● The current track number and its elapsed
playing time will be displayed.
2
3
To stop playback, press STOP.
Disc Resume feature is also applicable for VCDs
and SVCDs (see “Resume” section).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Special DVD Features
Special VCD & SVCD Features
Playback Control (PBC)
Playback control is a feature on some Video CDs
/ Super Video CDs that enables interactive use.
Video CD discs with Playback Control features
enables user to access a selected track directly
from the menu.
DVDs may contain menus to navigate the disc
and access special features. Press the appropriate
numerical key or use 4, 3, 2, 1to highlight your
selection in the DVD menu and press ENTER/OK
to confirm.
Title/Disc menu
1
Press MENU.
1
2
Load a Video CD with PBC and press PLAY.
Go through the menu with the keys indicated on
the TV screen until your chosen passage starts to
playback. If a PBC menu consists of a list of tracks,
you can select a track directly.
Enter your choice with the numerical keys.
Press RETURN/RESUME to go back to the
previous menu, if applicable on the menu.
You may also select PBC OFF under Personal
Preferences.
● If the current title has a menu, the menu will
appear on the screen. Otherwise, the menu will
be displayed.
If menu is available on the disc, audio language,
subtitle options, chapters for the title and other
options will appear for selection.
2
3
3
4
To remove the title/menu, press MENU again.
5
Camera Angle
● When set to OFF, PBC menus are not
activated for further playback.
Some discs contain scenes which have been shot
simultaneously from various angles.
This DVD player allows you to select the desired
camera angle.
Special CD & MP3 Features
CD text and MP3 text
Some CD or MP3-CD discs may contain text
information (eg. track name, album name, artist
name etc.) which will appear on the player and TV
screen during playback.
By default, CD text display is set to ON.
To switch off the CD text display, press CD
TEXT/BIT RATE on the remote control during
playback.
Press CD TEXT/BIT RATE on the remote control
again to switch on the text display mode.
● When the DVD player encounters a scene shot
in multiple angles, it will give an indication on the
“Temporary Feedback Field.”
● The angle icon remains displayed until multiple
angles are no longer available.
● Use 3/4to select the required angle.
● Playback changes to the selected angle.
● You can also select }in the menu bar or press
ANGLE on the remote control directly.
1
2
3
Changing the audio language
Select Yin the menu bar or press AUDIO on the
remote control directly.
Press AUDIO or 3/4repeatedly to select the
different languages.
4
1
2
CD
AudioDiskMode
total time
play
track
11
time
2.34
total tracks
14
5.29.78
Subtitle Language
Select Zin the menu bar or press SUBTITLE on
the remote control directly.
Press SUBTITLE or 3/4repeatedly to select the
different subtitles.
Disc
The Best of Me
Bryan Adams
1
2
Artist
Track
Everything I do
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
DVD VCD
Slow Motion
General Features
Note:
1
2
Select
● Playback will pause.
Use 1/2to select the required speed: –1, –1/2,
–1/4 or –1/8 (backward), or +1/8, +1/4, +1/2 or
+1 (forward).
in the menu bar and press 4.
– Unless stated, all operations described are based
on remote control use. Some operations can be
carried out using the menu bar on the TV screen.
3
4
Select 1 to play the disc at normal speed again.
If ;is pressed, the speed will be set to zero
(PAUSE).
Moving to another title/chapter
DVD VCD
5
To exit slow motion mode, press 3.
(Playback continues at the selected speed.)
When a disc has more than one title/track or
chapter, you can move to another title/chapter as
follows:
Still Picture and Frame-by-frame
1
2
Press ON SCREEN, then select Wor Xin the
menu bar.
Press 3/4or the numerical keys to select a title/
chapter.
DVD VCD
playback
1
2
Select
in the menu bar and press 4.
● Playback will pause.
Use 1/2to select the previous or next picture
frame.
CD
1
Press Tor Sbriefly during playback to go
to the next track or to return to the beginning of
the currect track respectively.
Press Stwice briefly to step back to the
previous track.
● Press PLAY to play the disc at normal speed again.
Note:
– You can also activate frame-by-frame playback by
pressing PAUSE repeatedly on the remote control.
2
3
To go directly to any track, enter the track
number using the numerical keys.
DVD VCD CD
Scan
Scanning plays the first 10 seconds of each
chapter/track on a disc.
Press SCAN.
To continue playback at your chosen chapter/
track, press SCAN again or press PLAY.
Search
1
2
DVD VCD
1
2
Select
in the menu bar and press 4.
Use 1/2to select the required speed: –32, –8 or
–4 (backward), or +4, +8, +32 (forward).
Select 1 to play the disc at normal speed again.
To exit the Search mode, press 3.
3
4
CD
● To search forward or backward through different
speeds, you can also hold down Tor Sfor
more than two seconds.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Repeat
DVD
Shuffle Across All Discs
Shuffle feature plays all tracks on all loaded discs
on the disc tray in random sequence.
Press SHUFFLE repeatedly during playback.
● SHUFFLE, SHF ALL DSC, SHUFFLE OFF
appears continuously on the front display for
about 3 seconds.
Repeat chapter/title/disc
1
Each time you press REPEAT, the front display
changes as follows;
REPEAT CHPT
REPEATTITL
REPEAT DISC
Notes:
REPEAT OFF RPT ALL DSC
– DVD Discs will not be included in the "Shuffle
across all discs" sequence.
– With VCD 2.0, set the PBC (Playback Control) to
Off.
REPEAT CHPT*: repeat the current chapter
REPEAT TITL: repeat the current title
REPEAT DISC*: repeat the entire disc
RPT ALL DSC: repeat all discs loaded on the tray
REPEAT OFF: exit repeat mode
DVD VCD
Time search
* This feature may not be available with some
discs.
The Time Search function allows you to start
playing at any chosen time on a disc.
VCD CD
1
2
Select
● Playback will pause.
in the menu bar and press 4.
Repeat track/disc
● The elapsed playing time is displayed in a time
edit box.
Enter hours, minutes and seconds from left to
right in the time edit box using the remote control
numerical keys.
● Each time an item has been entered, the next
item will be highlighted.
Press ENTER/OK to confirm the selected time.
● The time edit box will disappear and playback
starts from the selected time position on a disc.
Each time you press REPEAT, the front display
changes as follows;
REPEATTRK
REPEAT OFF
REPEAT DISC
RPT ALL DSC
REPEAT TRK: repeat the current track
REPEAT DISC: repeat the entire disc
RPT ALL DSC: repeat all discs loaded on the tray
REPEAT OFF: exit repeat mode
3
Note:
– When only one disc is available on the disc tray,
continuous playback will apply when RPT ALL DISC
is selected.
1
3
1
off
0:00:34
4
Press ON SCREEN to remove the menu bar.
DVD VCD
CD
DVD VCD
Repeat A-B
– DVD-Video Discs: repeat a sequence in a
title
– Video and Audio CDs: repeat a sequence
in a disc
Press A-B at your chosen starting point.
Press A-B again at your chosen end point.
● REPEAT A B appears briefly on the front
display, and the repeat sequence begins.
To exit the sequence, press A-B.
Zoom
The Zoom function allows you to enlarge the
video image and to pan through the enlarged
image.
1
2
1
2
Select
.
Press 3/4to activate the ZOOM function and
select the required zoom factor: 1.33 or 2 or 4.
● Playback will continue.
3
● The selected zoom factor and ‘Press OK to
pan’ appears below the menu bar.
● The zoomed picture will appear on the TV
screen.
3
Press ENTER/OK to confirm the selection.
● The panning icon appears on the screen.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
4
5
Use 1, 2, 3, 4to pan across the screen.
When ENTER/OK is pressed only the panned
picture will be shown on the screen.
To exit ZOOM mode, select zoom factor to
“Off” (zoom factor 1) in the menu bar.
Storing album/title
1
Press 4to select ALBUM/TRACK. Albums are for
MP3 discs and Tracks for (S)VCD.
Use 2and 1to select the require Album/Track.
Press ENTER/OK to store the entire selected
Album/Track.
6
2
3
● The Album/Track. number will be added to
the program list.
off
1
1
no
2
press OK to pan
Storing track/chapter
1
Press 4on the selected TRACK/INDEX. Tracks
are for MP3/CDDA discs and Index for S(VCD).
● The track/chapter number will be highlighted.
Use 2and 1to select the required Track/Index.
Press ENTER/OK to confirm the selection.
● The selected Track/Index will be added to the
program list.
Note:
– ZOOM mode gets deactivated when starting
playback of next element in FTS across disc and
Shuffle across Disc modes.
2
3
Favorite Track Selection Across Disc
4
Press ON SCREEN to exit the FTS menu.
● This FTS function allows you to create a list
favorite tracks by selecting tracks from different
discs available in the disc tray.
● The supported discs are CDDA, MP3, VCD,
SVCD.
Switching a Program OFF
1
2
3
Use 3/4to move to FTS.
Press 2or 1to select OFF.
Press ON SCREEN to exit.
● Favorite Track Selection (FTS) list contains up to
100 elements across all the discs on the tray.
Erasing a selection in a Program
1
While playback is stopped, select FTS in the menu
bar.
Use 4to select PROGRAM.
Use 2and 1to select the required number.
Press ENTER/OK to erase the selection.
Press ON SCREEN to exit.
Storing a Program
1
Press OPEN/CLOSE and load preferred discs
onto the disc tray.
In STOP mode, select FTS in the menu bar.
Press 4in the menu bar.
● The FTS window menu appears.
Select All Discs option.
2
3
4
5
2
3
4
Erasing all selections
1
2
While playback is stopped, select FTS in the menu
bar.
Use 4to select CLEAR ALL and press ENTER/
OK.
● All selections will be erased.
Press ON SCREEN to exit.
Storing entire disc as the FTS
1
2
Press 4to select DISC.
Use 2and 1to select the require disc list for all
the loaded discs in the disc tray.
Press ENTER/OK to store the entire disc
selection.
3
3
Note:
– Pressing PLAYXCHANGE or OPEN/CLOSE during
playback will erase the selected Program if any.
– With VCD 2.0, set the PBC (Playback Control) to
Off.
FTS for a Single disc
1
2
Select FTS in the menu bar.
Press 4in the menu bar.
● The FTS window menu appears.
Select CURRENT DISC option.
3
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Storing album/title
MP3 Disc Features
1
Press 4to select ALBUM/TRACK. Albums are for
MP3 and Tracks for (S)VCD.
Use 2and 1to select the require Album/Track.
Press ENTER/OK to store the entire selected
Album/Track.
Support following MP3-CD formats (Joliet
format):
2
3
● Max. 64 characters (file names or directory)
● Max. nested directory is 8 levels
● The max. album (directory) number is 100
● Supported VBR bit-rate
● The Album/Track number will be added to
the program list.
● Supported sampling frequencies for MP3 disc are:
32 kHz, 44.1 kHz, 48 kHz
● Supported Bit-rates of MP3 disc are: 32, 64, 96,
128, 192, 256 (kbps)
Storing track/chapter
1
Press 4on the selected TRACK/INDEX. Tracks
are for MP3/CDDA and Index for (S)VCD.
● The track/chapter number will be highlighted.
Use 2and 1to select the required Track/Index.
Press ENTER/OK to confirm the selection.
● The selected Track/Index will be added to the
program list.
Following formats can’t be supported
2
3
● The files like *.WMA, *.AAC, *.DLF, *.M3U, *.PLS
● Chinese filenames
● The non-session closed discs
● The discs recorded under UDF format
4
Press ON SCREEN to exit the FTS Menu.
Switching a Program OFF
Downloading MP3 files from the Internet or
copying songs from your own legal discs is a
delicate process.
1
2
Use 3/4to move to FTS.
Press 2or 1to select OFF.
Sound
Quality
Approximate Approximate total
Comment
Bit Rate
Erasing a selection in a Program
Reduction Ratio
MP3-CD time
AM radio
32 kbps
64 kbps
40 : 1
20 : 1
15 : 1
10 : 1
5 : 1
40 hrs
Sound quality significantly affected
– not recommended
1
While playback is stopped, select FTS in the menu
bar.
Use 4to select PROGRAM.
Use 2and 1to select the required number.
Press ENTER/OK to erase the selection.
Press ON SCREEN to exit.
FM radio
Near-CD
CD-like
CD*
20 hrs
96 kbps
128 kbps
256 kbps
320 kbps
15 hrs
10 hrs
5 hrs
Balanced sound quality
– compression rate
2
3
4
5
Compression rate low
– suggest to play CDs instead
CD*
3 : 1
3 hrs
You may experience an occasional “skip”
while listening to your MP3 files. This is
normal.
Erasing all selections
1
2
While playback is stopped, select FTS in the menu
bar.
Additional note for MP3 disc Playback:
Use 4to select CLEAR ALL and press ENTER/
OK.
● All selections will be erased.
Press ON SCREEN to exit.
– In compliance with the SDMI, digital-out is
muted while playing MP3 discs.
– Due to the recording nature of Digital Audio
MP3 (DAM),only Digital Audio music will play.
– The disc reading time may exceed 10 seconds
due to the large number of songs compiled
onto one disc.
3
CDDA
ANY
– Playback of multi-session disc is supported for
the first 10 sessions with the same format.
– For multi-session discs with different formats,
only the first session will be available.
– Some MP3 discs cannot be played depending
on the disc characteristics or recording
conditions.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Album/Title Playback
This feature allows you to view and select the
next or previous MP3 disc Album/Title.
1
2
3
Press 3/4to scroll through the previous or next
Album.
Press 1/2to scroll through the previous or next
Track.
You can also select the desired album/track
number directly using the numeric keys on the
remote control.
Notes:
– In STOP mode: numbers are used for album
selection.
– In PLAY mode: numbers are used for track
selection.
● Only the following functions are possible for MP3
discs:
– STOP / PLAY / PAUSE
– SKIP NEXT / PREVIOUS
– REPEAT (TRACK / ALBUM / DISC / ALL
DISCS)
– SHUFFLE ACROSS ALL DISC
– FTS ACROSS ALL DISC
Repeat track/album/Disc
Each time you press REPEAT, the front display
changes as follows;
REPEATTRK
REPEAT ALBM
REPEAT DISC
REPEAT OFF RPT ALL DSC
REPEAT TRK: repeat a track
REPEAT ALBM: repeat an album
REPEAT DISC: repeat the current disc
RPT ALL DSC: repeat all discs loaded on the tray
REPEAT OFF: exit repeat mode
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Control
– Double-sided DVDs and multi-volume VCDs may
have a different ID for each side. In order to make
the disc ‘child safe’, each side has to be authorized.
DVD VCD
Child Lock
Activating/deactivating the Child
Lock
1
When disc playback is stopped, select ACCESS
CONTROL in the Personal Preferences menu
using 3/4.
2
3
4
5
6
Enter a 4-digit code of your own choice twice.
Move to “CHILD LOCK” using 3/4.
Move to Ç/ Éusing 2.
Select Çusing 3.
Deauthorising discs
Insert the disc.
● Playback starts automatically.
Press 9while {is visible.
● The |will appear and the disc is now
deauthorized.
Press ENTER/OK or 1to confirm, then press ON
SCREEN to exit the Personal Preferences menu.
● Now unauthorized discs will not be played
unless the 4-digit code is entered.
1
2
7
Select Éto deactivate the CHILD LOCK.
Notes:
Note:
Confirmation of the 4-digit code is necessary when:
– The code is entered for the very first time (see
above),
– Playback continues even after you have
deauthorized the disc. Press 9if you want to stop it.
– The code is changed or cancelled (see ‘Changing
the 4-digit code’),
DVD
Parental Control
Movies on DVDs may contain scenes not suitable
for children. Therefore, discs may contain
1en
1en
1
2
‘Parental Control’ information which applies to
the complete disc or to certain scenes on the disc.
These scenes are rated from 0 to 8, and
alternative, more suitable scenes are available on
the disc. Ratings are country dependent. The
‘Parental Control’ feature allows you to prevent
discs from being played by your children or to
have certain discs played with alternative scenes.
Access control
Status window
Child lock
Parental level
Change country
Change code
Authorising discs
Insert the disc.
1
2
● The ‘child safe’ dialog will appear.
You will be asked to enter your secret code for
‘Play Once ‘or ‘Play Always.’
1en
1en
1
2
Access control
Status window
● If ‘Play Once’, disc can be played untill you select
another disc, open the disc tray or turn the player
off.
•
[ ] [ ] [ ]
insert code
● If ‘Play Always’, disc will become authorized and
can always be played, even if the Child Lock is set
to ON.
Notes:
– The player memory can maintain 80 authorized
(‘Child safe’) disc titles. A disc will be placed in the
list when ‘Play Always’ is selected.
– Each time a ‘child safe’ disc is played, it will be
placed on top of the list. When the list is full, the last
disc in the list will be replaced when a new disc is
added.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Control
Activating/Deactivating Parental
Control
When disc playback is stopped, select ACCESS
CONTROL in the Personal Preferences menu
using 3/4.
Changing the 4-digit code
1
When disc playback is stopped, select ACCESS
CONTROL in the Personal Preferences menu
using 3/4.
Enter the current 4 digit code.
Move to CHANGE CODE using 4and press 2.
Enter the new 4-digit code.
Enter the code a second time and reconfirm by
pressing ENTER/OK.
Press 1to exit the menu.
1
2
2
3
4
5
Enter your 4-digit code. If necessary, enter the
code a second time.
3
4
5
Move to Parental Control using 3/4.
Move to value adjustment (‘– –’ -8) using 2.
Then use 3/4or the numerical keys on the
remote control to select a rating from 1 to 8 for
the disc inserted.
6
● The new 4 digit code will be take effect.
If you forget your 4 digit code
Rating 0 (displayed as ‘– –’):
Parental Control is not activated. The Disc will be
played in full.
1
2
Press 9to exit the ‘Child Safe’ screen.
Select ACCESS CONTROL in the Personal
Preferences menu using 3/4.
The 4-digit code can be cancelled by pressing 9
four times in the ‘Access Control’ dialog.
You can then enter a new code (twice!) as
described above in ‘Changing the 4 digit code’.
Ratings 1 to 8:
3
4
The disc contains scenes not suitable for children.
If you set a rating for the player, all scenes with the
same rating or lower will be played. Higher rated
scenes will not be played unless an alternative
which has the same rating or lower is available on
the disc. If no suitable alternative is found,
playback will stop and the 4-digit code has to be
entered.
Parental Control Disclaimer
This player features the PARENTAL CONTROL
system which is to activate when playing DVD
discs furnished with certain software coding only.
Also note that at the time of release of this player,
certain aspects of the technical standards had not
been settled between set makers and the disc
industries.
6
Press ENTER/OK or 1to confirm, then press 1
again to exit the Personal Preferences menu.
Access control
Status window
Child lock
On this basis, YAMAHA cannot guarantee the
functioning of the PARENTAL CONTROL
system and denies any liability associated with
unintended watching of disc content.
Parental level
Change country
Change code
If in doubt, please make sure the disc plays
according to your PARENTAL CONTROL
settings before you allow children access to the
player.
Country
You can set the DVD player to block or allow
DVD playback according to the country rating
selected in the DVD.
1
When disc playback is stopped, select ACCESS
CONTROL in the Personal Preferences menu
using 3/4.
2
3
4
5
6
Enter the 4-digit code.
Move to CHANGE COUNTRY using 4.
Press 2.
Select a country using 3/4.
Press ENTER/OK or 1to confirm, then press 1
again to exit the menu.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair.
Problem
Solution
No power
No picture
–
Check if the AC power cord is properly connected.
–
–
Check if the TV is switched on.
Check the video connection.
Distorted picture
–
Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
Completely distorted picture or
black/white picture with DVD or
Video CD
–
Make sure the NTSC/PAL setting at the DVD player matches
the video signal of your television.
(See NTSC/PAL Conversion/Settings)
No sound or distorted sound
–
–
Adjust the volume.
Check that the speakers are connected correctly.
No audio at digital output
–
–
Check the digital connections.
Check the settings menu to make sure the digital output is set
to ALL or PCM.
–
Check if the audio format of the selected audio language
matches your receiver capabilities.
Disc can’t be played
–
–
Ensure the disc label is facing up.
Check if the disc is defective by trying another disc.
Picture freezes momentarily during
playback
–
–
–
Check the disc for fingerprints/scratches and clean with a soft
cloth wiping from center to edge.
No return to start-up screen when
disc is removed
Reset the player by switching the player off, then on again.
The player does not respond to the
remote control
Aim the remote control directly at the sensor on the front of
the player.
–
–
–
Reduce the distance to the player.
Replace the batteries in the remote control.
Re-insert the batteries with their polarities (+/– signs) as
indicated.
Buttons do not work or player stops
responding
–
–
To completely reset the player, unplug the AC cord from the
AC outlet for 5-10 seconds.
Player does not respond to some
operating commands during
playback
Operations may not be permitted by the disc. Refer to the
instructions of the disc.
This player does not respond to any
command when turned on for the
first time
–
Turn on your TV and follow the procedures on the screen to
decide initial setup items.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
PLAYBACK SYSTEM
AUDIO PERFORMANCE
DVD Video
DVD+RW
DVD+R
Video CD and SVCD
CD (CD-R and CD-RW)
MP3 CD
DA Converter
DVD
CD/Video CD
S-Video CD
24 bits
fs 96 kHz
fs 44.1 kHz
fs 48 kHz
fs 44.1 kHz
2 Hz - 44 kHz
2 Hz - 20 kHz
2 Hz - 22 kHz
2 Hz - 20 kHz
105 dB
Signal-Noise (1kHz)
Dynamic Range (1kHz)
Harmonic Distortion + Noise (1kHz)
MPEG MP3
100 dB
0.003%
MPEG Audio L3
TV STANDARD (PAL/50Hz) (NTSC/60Hz)
Number of lines
Playback
625
Multistandard
525
(PAL/NTSC)
CONNECTIONS
Y Pb/Cb Pr/Cr (480i/p)
S-Video Output
Video Output
Audio L+R output
Subwoofer output
Digital Output
Cinch 3x (green, blue, red)
Mini DIN, 4 pins
Cinch (yellow)
Cinch (white/red) x2
Cinch (black)
1 coaxial, 1 optical
IEC958 for CDDA / LPCM
IEC1937 for MPEG1/2, Dolby
Digital, DTS
VIDEO PERFORMANCE
YUV output
Y: 1Vpp into 75 ohm
Pr/Cr Pb/Cb: 0.7Vpp into 75 ohm
Y: 1Vpp into 75 ohm
C: 0.3Vpp into 75 ohm
1 Vpp into 75 ohm
On/Off
S-Video output
Video output
Black Level Shift
Video Shift
Left/Right
AUDIO FORMAT
CABINET
Dolby Digital/
DTS/MPEG
PCM
Compressed Digital
Dimensions (w x h x d)
Weight
435 x 116 x 425 mm
Approx. 6 Kg
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
96, 112, 128, 256 kbps and
variable bit rate fs 32, 44.1, 48kHz
POWER SUPPLY
MP3
(Joliet)
Power inlet
U.S.A. model
Australia model
120V, 60Hz
Full decoding of Dolby Digital and DTS multi channel sound
Analog Stereo Sound
240V, 50Hz
Approx. 20W
< 5W
Power usage
Dolby Surround-compatible downmix from Dolby Digital
multi-channel sound
Power usage standby
3D Sound for virtual 5.1 channel sound on 2 speakers
* typical playing time for movie with 2 spoken languages and
3 subtitle languages
Specifications subject to change without prior notice.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
YAMAHA CORPORATION
3139 246 12101 Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|