CDC-845/745
Natural Sound Compact Disc Player
5-Disc Carousel Auto-Changer
PLAYXCHANGE; Disc Changing Capability while Playing Another
Random Access Programmable Play
Random-Sequence Play
Single Track/Entire Disc/All Disc Repeat Play
Automatic Tape-Programming
Automatic Peak Level Searching Capability
Program Data Filing Capability
Disc Scanning Capability Useful for Disc Searching or Disc Checking
Display Brightness Changing Capability
CD Synchronized Recording with a Compatible YAMAHA Tape Deck
Optical Digital Output
Remote Control Capability
Thank you for selecting this YAMAHA Compact Disc Player.
OWNER’S MANUAL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CONTENTS
Safety Instructions.................... 2
Connections ............................. 4
Identification of Components.... 5
Loading Discs/Disc Play........... 7
Random-Sequence Play ........ 11
Program Play.......................... 12
Repeat Play............................ 16
Index Search .......................... 16
Track Programming for
Recording to Tape...................17
CD Synchronized Recording...21
Notes about the Remote
Control Transmitter................. 22
Notes about Handling
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER-SERVICEABLE
PARTS INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
IMPORTANT!
Please record the serial number of this
unit in the space below.
Explanation of Graphical Symbols
•
Model:
Serial No.:
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The serial number is located on the rear
of the unit.
Retain this Owner’s Manual in a safe
place for future reference.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
WARNING
Compact Discs....................... 22
Troubleshooting...................... 23
Specifications......................... 23
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personel only.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
To avoid electrical shock, do not open the unit. Refer
servicing to qualified personnel only.
DANGER
DANGER: The use of optical instrument with this product will
increase eye hazard.
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
The apparatus is not disconnected from the AC power
source as long as it is connected to the wall outlet, even if
the apparatus itself is turned off.
FCC INFORMATION
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
Relocate either this product or the device that is being
affected by the interference.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions.
Failure to follow instructions could void your FCC
authorization to use this product in the USA.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s
often undetectable until it is too late, YAMAHA
and the Electronic Industries Association’s
Consumer Electronics Group recommend you to
avoid prolonged exposure from excessive
volume levels.
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing. Since hearing damage from loud sounds is
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
●
●
●
Before making any connections, switch OFF the power to
If the placement of this unit causes noise to other
equipment, such as a tuner, separate them from each other.
the unit and the amplifier or other component.
Connections should be made to the correct input terminals
of the amplifier or other component.
This unit
LINE OUT
DIGITAL
AUDIO
OUT
OPTICAL
To AC outlet
➊
➋
Optical fiber cable
(not included)
Connection cord
(included)
Amplifier
OPTICAL
CD
DIGITAL IN
Choose one of the ways listed below to connect this unit to your amplifier.
When the LINE OUT (analog) terminals of this
When the DIGITAL AUDIO OUT (OPTICAL)
unit are used (
)
terminal of this unit is used (
)
➊
➋
●
●
Be sure that the left (“L”) and right (“R”) LINE OUT terminals
are connected to the corresponding (left and right) terminals
of the amplifier or other component.
Connect the “LINE OUT” terminals to the “CD” (or “AUX”)
terminals of the amplifier. If the amplifier does not have
such terminals, use the “TAPE PB” terminals. For additional
details concerning these connections, refer to the operation
instructions for the amplifier being used.
Before using this terminal, remove the terminal’s cover by
pulling it.
●
●
Make the connection from this terminal to the digital input
terminal of an amplifier or D/A (digital-to-analog) converter
by using a commercially available optical fiber cable.
Be sure to attach the terminal’s cover when this terminal is
not being used, in order to protect the terminal from dust.
* Use an optical fiber cable that conforms to EIAJ
standards. Other cables might not function correctly.
When this terminal is used for the connection, set the
OUTPUT LEVEL control to maximum.
●
●
Adjust the level of signals output into an amplifier, etc. by
using the OUTPUT LEVEL control.
●
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IDENTIFICATION OF COMPONENTS
CDC-845
* ( ) indicates the page number on which the control part is best described.
DISC SKIP button (p. 7)
OPEN/CLOSE button (p. 7)
STOP button (p. 8)
FRONT PANEL
Disc play MODE select button (p. 7)
POWER switch (p. 7)
PLAYXCHANGE
button (p. 7)
FILE/SAVE button (p. 14)
PLAY/PAUSE
button (p. 7)
CLEAR button (p. 13)
Disc tray (p. 7)
RANDOM
button (p. 11)
TAPE button (p. 17)
PLAYXCHANGE
OPEN/CLOSE
PLAY/
PAUSE
STOP DISC SKIP
1
2
D3ISC
4
5
SKIP
8
SEARCH
PROG TAPE CLEAR FILE/SAVE MODE
REPEAT RANDOM
POWER
+10
1
2
3
4
5
6
7
9
0
TIME
FILE
PHONES
OUTPUT LEVEL
DOWN UP
SAVE
PEAK
AUTO
DISPLAY OFF
REPEAT
button (p. 16)
PROG button (p. 12)
Numeric buttons (p. 8)
Remote control sensor
(p. 22)
SKIP button (p. 8)
PEAK button (p. 20)
TIME display mode select button (p. 9)
Display panel
SEARCH button (p. 9)
OUTPUT LEVEL button (p. 10)
PHONES jack (p. 10)
DISC-select buttons (p. 7)
REMOTE CONTROL TRANSMITTER
The control functions on the main unit and on the remote
control transmitter are virtually identical, with the exceptions
described below.
DIMMER button (p. 10)
OPEN/CLOSE
DIMMER
TIME
PROG
1
TAPE
REPEAT
3
RANDOM
MODE
+10
0
* The PLAY/PAUSE button on the main unit
has both the functions of the PLAY button and
the PAUSE button on the remote control
transmitter.
* Remote control transmitter has two DISC
SKIP buttons. Pressing each button will
search discs in the direction shown by the
arrow.
2
5
8
4
6
9
7
DISC SKIP
DISC
SCAN
DISC SCAN button (p. 9)
INDEX button (p. 16)
SKIP
PAUSE
PLAY
STOP
SEARCH
INDEX
–
+
OUTPUT LEVEL
SYNCHRO
SYNCHRO
button (p. 21)
This manual mainly describes how to operate
this unit by using the front panel buttons. To
operate this unit on the remote control
transmitter, use buttons with the same name
as those on the front panel.
OUTPUT LEVEL
buttons (p. 10)
(“+” is identical with “UP”
and “–” with “DOWN” of the
OUTPUT LEVEL control
on the main unit.)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CDC-745
* ( ) indicates the page number on which the control part is best described.
DISC SKIP button (p. 7)
OPEN/CLOSE button (p. 7)
FRONT PANEL
DISC-select buttons (p. 7)
switch (p. 7)
POWER
STOP button (p. 8)
PLAYXCHANGE button (p. 7)
Disc tray (p. 7)
PLAY/PAUSE button (p. 7)
TIME display mode
select button (p. 9)
SEARCH button (p. 9)
PLAYXCHANGE
OPEN/CLOSE
PLAY/
PAUSE
STOP DISC SKIP
DISC
3
FILE/
TIME
+10
1
2
4
5
SKIP
8
SEARCH
SAVE
MODE
REPEAT
RANDOM
POWER
FILE
OUTPUT LEVEL
DOWN UP
PHONES
SAVE
1
2
3
4
5
6
7
9
0
PROG TAPE
AUTO
DISPLAY OFF
PEAK
Numeric buttons (p. 8)
SKIP button (p. 8)
PEAK button (p. 20)
PROG button (p. 12)
TAPE button (p. 17)
Display panel
FILE/SAVE button (p. 14)
OUTPUT LEVEL button (p. 10)
MODE-select button (p. 7)
Remote control sensor (p. 22)
REPEAT button (p. 16)
PHONES jack (p. 10)
RANDOM button (p. 11)
REMOTE CONTROL TRANSMITTER
The control functions on the main unit and on the remote
control transmitter are virtually identical, with the exceptions
described below.
DIMMER button (p. 10)
OPEN/CLOSE
DIMMER
TIME
PROG
1
TAPE
REPEAT
3
RANDOM
MODE
+10
0
2
5
8
* The PLAY/PAUSE button on the main unit
has both the functions of the PLAY button and
the PAUSE button on the remote control
transmitter.
* Remote control transmitter has two DISC
SKIP buttons. Pressing each button will
search discs in the direction shown by the
arrow.
4
6
9
7
DISC SKIP
DISC
SCAN
DISC SCAN button (p. 9)
INDEX button (p. 16)
SKIP
PAUSE
PLAY
STOP
SEARCH
INDEX
–
+
OUTPUT LEVEL
SYNCHRO
SYNCHRO
button (p. 21)
This manual mainly describes how to operate
this unit by using the front panel buttons. To
operate this unit on the remote control
transmitter, use buttons with the same name
as those on the front panel.
OUTPUT LEVEL
buttons (p. 10)
(“+” is identical with “UP”
and “–” with “DOWN” of the
OUTPUT LEVEL control
on the main unit.)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING DISCS/DISC PLAY
CDC-845
CDC-745
5 6 2, 4
6 6 2, 4
3, 6
6
3, 6
5
1
1
POWER
1
5
Select the disc play mode (DISC MODE: SINGLE or
ALL) while watching the display.
MODE
Shows the selected disc
mode.
2
3
4
Label side
upward
OPEN/CLOSE
“SINGLE” mode: The unit will play a designated disc only.
“ALL” mode: The unit will play all discs in the tray in
sequence.
PLAY/
6
Disc tray
PAUSE
DISC SKIP
* If necessary, select a desired disc by using a DISC-select
button or the DISC SKIP button.
DISC SKIP
CDC-845
1
2
D3ISC
4
5
Load the fifth disc.
CDC-745
OPEN/CLOSE
PLAY/
DISC
3
PAUSE
1
2
4
5
Notes
●
●
After closing the disc tray by pressing the OPEN/CLOSE
button in the stop mode or after selecting any disc by using
the DISC SKIP button, the display shows the total number of
tracks and the total recorded time of the disc to be played for
a few seconds.
Additionally, you can close the disc tray by pressing the
PLAY/PAUSE button, a DISC-select button, a numeric
button or the RANDOM button, or by pressing the front edge
of the disc tray gently. If the tray is closed in these ways,
play will begin automatically, however, the display will not
show the total number of tracks and the total recorded time
of the first disc to be played.
PLAYXCHANGE
During play, you can open the disc tray by pressing the
PLAYXCHANGE button without interrupting disc play.
However, in this case, pressing the DISC SKIP button has no
effect.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop play temporarily
To stop play completely
PLAY/
PAUSE
STOP
PAUSE
* To resume play, press the PLAY/PAUSE button again
(or press the PLAY or PAUSE button on the remote control
transmitter).
To play a desired track on the disc
SKIP PLAY
DIRECT PLAY
Select a desired track by using the numeric buttons.
●
To play from the beginning of the track following the one
now playing
SKIP
+
10
1
2
3
4
5
6
7
8
9
0
●
To play from the beginning of the track now playing
SKIP
The selected track
number is displayed.
●
To play from the beginning of the track before the one now
playing
Example: To select track 25
Press twice, then immediately press
SKIP
once.
➀
➁
+
10
1
2
3
4
5
6
7
8
9
0
(twice)
➀
➁
* These operations can also be performed when the unit is in
the pause or stop mode.
* If a track number higher than the highest track number on the
disc is selected, the last track on the disc will be played.
Encloses the tray number of the selected disc.
Shows the tray numbers with discs.
Shows the selected track number.
Shows the time displays. (Refer to “Selecting time
displays” on page 9.)
Displays the numbers that correspond to the numbers of
the tracks (as high as number 15) on the disc. After each
track is played, its corresponding number disappears so the
number of remaining tracks (and their numbers) can be
seen at a glance.
Display information at disc play
➀
➁
➂
➃
➀
➁
➂
➃
➄
Shows the level of signals output into an amplifier or the
headphone level adjusted by using the OUTPUT LEVEL
➅
➄
➅
control.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
To advance or reverse play rapidly (MANUAL SEARCH)
●
The sound can be heard (although slightly garbled) during
To advance rapidly
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
Manual search can also be performed while disc play is
paused, though no sound will be heard.
SEARCH
●
(press and hold)
To reverse rapidly
SEARCH
(press and hold)
Scanning discs to search for a desired disc (or to check discs on the disc tray)
When the DISC SCAN button is pressed while this unit is
stopped, this unit will play an early part of each disc in turn.
Each disc is played for 8 seconds.
DISC
SCAN
If, during this play, you hear a disc that you want to listen to in
entirely, press this button once again, or press the PLAY
button on the remote control transmitter. This will cancel this
play mode and the unit will enter into the normal play mode.
Notes
●
●
●
During this play, the disc tray numbers flash on and off on
the display. Every time the play of a disc is finished, the
corresponding tray number is changed from flashing to
lighting.
There may be a case that you can gain no sound with this
play, if the disc has a long blank space between tracks, for
example.
Durng this play, the setting of the disc play mode (MODE),
the program play mode, etc. are canceled temporarily.
Selecting time displays
You can select any of the four time displays by pressing the TIME display mode-select button.
Elapsed time of the track now playing
➀
Total remaining time on the disc
➃
Total disc play time
Remaining time of the track now playing
➂
➁
Note
The remaining time
21 or higher.
will not be displayed for track number
➁
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing brightness of the display
You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button.
During play
Normal illumination
Except during play
Normal illumination
DIMMER
Dim
Dim
“OFF”
Dim
(The AUTO DISPLAY OFF indicator illuminates.
In this mode, if a disc is played, the display
illumination will be off.)
* While the display illumination is off,
the AUTO DISPLAY OFF indicator
on the front panel illuminates.
FILE
SAVE
AUTO
DISPLAY OFF
When you listen with headphones
Connect the headphones to the PHONES jack and adjust the
volume by using the OUTPUT LEVEL control.
* Note that the use of the OUTPUT LEVEL control will also
vary the level of the signal output to the amplifier.
PHONES
–
+
OUTPUT LEVEL
OUTPUT LEVEL
DOWN
UP
or
Open/close the control door CDC-845
When it is not necessary to operate controls inside the control
door, close the door.
To close the door
To open the door
10
Download from Www.Somanuals.com. All Manuals Search And Download.
RANDOM-SEQUENCE PLAY
You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or any
desired disc in the disc tray.
CDC-845
CDC-745
3
3
4
2
2
4
1
3
Select whether to play one disc or all discs in the tray.
MODE
* If the “SINGLE” disc play mode is selected, next select a
desired disc by using the DISC SKIP button or a DISC-
select button.
OPEN/CLOSE
RANDOM
2
4
To cancel random-sequence play
Press the STOP button or RANDOM button once again, or
open the disc tray by pressing the OPEN/CLOSE button.
Notes
●
This feature will not function during programming, or during
programmed play.
●
If the POWER is switched off when the random-sequence
play mode is functioning, when the POWER is switched on
again, the unit will begin the random-sequence play
automatically. (This feature is available for timer play.)
●
If the SKIP
play, the next randomly programmed track will be played. If
the SKIP button is pressed, play will return to the
beginning of the track now being played.
button is pressed during random-sequence
●
●
This indication appears while the unit is
mixing up tracks.
Total remaining time on the disc will not be displayed during
random-sequence play.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAM PLAY
You can enjoy listening to your favorite tracks selected from one or several discs in any desired order using programmed play.
CDC-845
CDC-745
3
5 1
2
5 1
3
3
4
3
4 2
Stop the unit.
Select the desired track.
1
4
STOP
+
10
1
2
3
4
5
6
7
8
9
0
2
3
PROG
* Repeat step 3 – 4 to set more programs.
When the programming is completed;
5
PLAY/
PAUSE
If necessary, select the desired disc.
CDC-845
1
2
D3ISC
4
5
DISC SKIP
or
CDC-745
DISC
3
1
2
4
5
Shows the program number for the track to be set next.
Shows the selected disc and track number.
Shows the total time of the tracks currently programmed.
Shows only the numbers of programmed tracks on the
selected disc.
Display information during programming
➀
➁
➂
➃
* If “P-01” does not appear in the display after the PROG
button is pressed, press the TIME display mode-select
button.
➀
* If the total time exceeds 99 minutes and 59 seconds, the
time will not be displayed.
➁
➂
➃
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
●
●
You can set as many as 40 programs at one time.
If, during programming, the TIME display mode-select button
is pressed, the program number display can be changed to
display the total time of the programmed tracks or no
information. To return to the previous display, press the
TIME display mode-select button once again.
●
You can set a whole disc as a program by pressing “0”,
instead of selecting a track number. At that time, “AL”
flashes in the display.
If you will program tracks from more than one disc, before
you press the PROG button, check the total recorded time of
each disc on the disc tray by pressing the DISC SKIP button
in turn. Without this operation, the total time of the
programmed tracks will not be displayed during
programming.
●
●
●
The SKIP (
playing, but only within the range of the programmed tracks.
The SEARCH ( and ) button can be used during
and
) button can be used during
playing to search through all tracks, including
unprogrammed tracks.
●
The total time of the programmed tracks will not be
displayed, if a track number higher than 20 is programmed.
To stop program play
To check programmed data
●
Press the STOP button. The first track number programmed
will be displayed.
To resume play, press the PLAY/PAUSE button. Play will
1. If the unit is in the play mode, press the STOP button.
2. Press the PROG button.
●
3. Each time the SKIP
button is pressed, the track
begin from the beginning of the program.
numbers and sequential order of the programmed tracks
can be checked one after another. The display of the track
number can be returned (sequentially in reverse order) by
To cancel a programmed setting
pressing the SKIP
button.
There are several methods, as described below.
Press the STOP button while the unit is stopped.
●
To correct programmed data
●
CDC-845 only
1. Follow the procedure described in “To check programmed
data”.
2. Display the track number to be corrected by pressing the
SKIP button.
Press the CLEAR button while the unit is stopped.
Open the disc tray.
Switch off the power.
●
●
3. Press a numeric button to select a track to replace the one
displayed. The previously programmed track will be
cleared from the memory and the new one will be
programmed.
4. After the correction has been completed, press the PROG
button or PLAY/PAUSE button once again.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAM FILING
This unit has a function that can store (file) program data that has been set. You can play a disc with your favorite program at any
time without setting it again. However, note that you can not file program data which consists of tracks selected from more than one
disc.
CDC-845
CLEAR
FILE/SAVE
PLAY/PAUSE
OPEN/CLOSE
STOP
DISC
POWER
PROG
Numeric buttons
0
CDC-745
0
PLAY/PAUSE
DISC
OPEN/CLOSE
STOP
POWER
Numeric buttons
PROG
FILE/SAVE
To file data of tracks programmed in a desired
order
Notes
●
Program data filed in this way can be retained for about two
weeks with the power switched off.
One-program data can be filed for any one disc. If different
program data is filed for a disc, the previous program data
will be deleted from the file, and only the new program data
will be retained in the file.
1
2
Follow step 1 – 3 on page 12.
●
Select track numbers in a desired order.
●
Program data for a total of as many as about 100 discs can
be filed at any one time.
+
10
1
2
3
4
5
6
7
8
9
0
* If programs have already been set, make sure that
“TRACK” is flashing continuously in the display. If it is
not, once again press the PROG button. (If a program
play is being performed, press the STOP button, and
then press the PROG button.)
3
CDC-845
CDC-745
FILE
/
SAVE
FILE/SAVE
FILE
SAVE
AUTO
DISPLAY OFF
14
Download from Www.Somanuals.com. All Manuals Search And Download.
To play with program data
To delete program data from file
1
1
If the unit is playing a disc, press the STOP button.
*
If a program play is on standby, press the STOP
button (or the CLEAR button for CDC-845 only)
to cancel that program setting.
2
3
If the FILE indicator is illuminated in the display, press
the FILE/SAVE button to turn the indicator off.
OPEN/CLOSE
2
3
Select the disc of which program you want to delete.
DISC SKIP
If the FILE indicator is not illuminated in the display,
press the FILE/SAVE button.
CDC-845
CDC-745
/
PROG
FILE
4
5
FILE
SAVE
FILE/SAVE
SAVE
AUTO
DISPLAY OFF
4
Select the disc to be played.
CDC-845
CDC-745
CDC-845
CDC-745
FILE
/
The SAVE indicator
goes off.
SAVE
FILE/SAVE
DISC
1
2
D3ISC
4
5
1
2
3
4
5
To delete all program data from the memory’s
file
Notes
●
If, in step 4, the SAVE indicator does not illuminate, the disc
does not have its program data in the memory’s file.
To stop the play of the filed program data and change to
ordinary play of the disc, press the FILE/SAVE button. By
this operation, the disc will be played in the ordinary
sequence of tracks, but the program data in the memory’s
file for that disc will not be deleted from the memory. To
once again call out the program data, follow step 3 and 4.
In the “ALL” disc play mode, discs which have program data
in the memory’s file are played with their program data, and
others are played normally.
●
1
2
Turn the POWER off.
CDC-845
CDC-745
FILE
/
0
SAVE
0
FILE/SAVE
●
(Press and hold.)
POWER
3
4
CDC-845
CDC-745
FILE
/
0
SAVE
0
FILE/SAVE
(Release.)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT PLAY
You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will
change whenever you press the REPEAT button.
SINGLE REPEAT (S REP)
A single track is repeatedly played.
(OFF)
* This is also available in the programmed-play mode and the
random-sequence play mode. (If the repeat play mode is
switched off, the programmed-play mode or the random-
sequence play mode will be resumed.)
REPEAT
S REP
FULL REPEAT (F REP)
In the “SINGLE” disc play mode: A designated disc is
repeatedly played.
In the “ALL” disc play mode: All discs in the disc tray are
repeatedly played.
* In the programmed-play mode, all programmed tracks are
repeatedly played.
* In the random-sequence play mode, all randomly sequenced
tracks are repeatedly played in the same order.
FREP
INDEX SEARCH
If the disc includes index numbers, play can be started from any desired index number.
To cancel the index search function
1
2
3
Select a track which has index numbers.
Press the INDEX button.
5
Notes
●
Not all discs have index numbers. The index system is a
method for sub-dividing tracks into smaller divisions (such
as, for example, the movements within classical
symphonies) for easier location of those parts. The liner
notes with the disc usually tell if such index numbers are
included.
●
If an index number is selected that is higher than any index
number on that disc, play will start from the last index
number point on the disc.
For some discs, play may begin slightly prior to the actual
INDEX
●
designated index point.
If the disc has no encoded index points, play will begin from
●
the start of the selected track.
The index number can be designated only while the INDEX
●
number display is illuminated.
Select the desired index number.
5
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TRACK PROGRAMMING FOR RECORDING TO TAPE
This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording
time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of
unrecorded space remaining at each end of the tape.
■ Automatic tape programming
This is for recording tracks on a disc so that they best fit onto a tape.
CDC-845
CDC-745
4 6 7, 8
1
2
7, 8 1
2
5
5
4 6
REPEAT
1
2
Stop the unit.
STOP
6
* By pressing the REPEAT button, the unit automatically
programs tracks for side A and side B separately
considering the tape’s total time.
Select the disc.
DISC SKIP
7
8
Begin recording on the tape deck and press the
PLAY/PAUSE button on this unit at the same time.
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and,
at the same time, press the PLAY/PAUSE button on
this unit.
3
4
The peak level searching function of this unit is useful
for adjusting recording level on the tape deck. (Refer
to page 20.)
Enter the tape’s total possible recording time.
Notes
TAPE
●
All tracks may not be programmed if the tape’s length is not
enough. To program all tracks, use a longer tape.
In step 6, you can check the program data for side A and
side B.
●
➀
➁
You can select any of four tape lengths by pressing
the TAPE button.
TAPE
(off)
➂
Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished, and
then it is replaced by the number of the first programmed
track for side A.
Shows the total time of programmed tracks for each side.
Shows the programmed track numbers for each side.
➀
5
Otherwise, you can also enter the tape’s total possible
recording time manually.
Example: For a C-64 tape (32 minutes on each side)
➁
➂
+
10
1
2
3
4
5
6
7
8
9
0
●
CD synchronized recording method can be used if your tape
deck is compatible with it.
➁
➀
In this case, in step 7 and 8, press the SYNCHRO button
and then press the PLAY button on this unit’s remote control
transmitter. Recording automatically begins.
(For details, refer to page 21.)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Manual tape programming
This is for recording desired tracks selected from one or more discs in any desired order onto tape.
CDC-845
CDC-745
9 10, 11
6 9 10, 11
3
3
6
2, 9
4
4
2, 9
Repeat step 3–4 to set more programs for the side B
of the tape. You can select the same track again.
1
Follow step 1, 4 and 5 on page 17.
8
* If “E rr” a ppears in the display, the track number just
selected cannot be programmed because there is not
enough time remaining on side B of the tape.
Flashes on and off.
2
PROG
The peak level searching function of this unit is useful
for adjusting recording level on the tape deck. For
peak level searching, when the programming for side
B is finished, press the PROG button and then press
the PEAK button.
9
3
If necessary, select the desired disc.
DISC SKIP
Begin recording on the tape deck and press the
10
PLAY/PAUSE button on this unit at the same time.
The unit will pause at the end of side A of the tape.
11
4
5
Select the desired track.
Turn the tape over to side B. Resume recording
and, at the same time, press the PLAY/PAUSE
+
10
1
2
3
4
5
6
7
8
9
0
button on this unit.
Notes
●
If you will program tracks from more than one disc, before
you press the PROG button, check the total recorded time of
each disc on the disc tray by pressing the DISC SKIP button
in turn. Without this operation, the total remaining time of
each side of the tape and previously programmed track
numbers (and also unprogrammed track numbers) will not
be displayed during programming.
Repeat step 3–4 to set more programs for side A of
the tape. You can select the same track again.
* If “E rr” appears in the display, the track number just
selected cannot be programmed because there is not
enough time remaining on side A of the tape.
●
In step 5 and 8, even if “E rr” appears in the display, you can
program another track of which time is shorter than the
remaining time on the side of the tape. In this case, you can
check the remaining time on the side of the tape by pressing
the TIME display mode-select button.
CD synchronized recording method can be used if your tape
deck is compatible with it.
6
After you finish the programming for side A, program
the pause mode by pressing the TAPE button.
●
TAPE
In this case, in step 10 and 11, press the SYNCHRO button
and then press the PLAY button on this unit’s remote control
transmitter. Recording automatically begins.
(For details, refer to page 21.)
* “Pu” flashes in the display, and after then you can begin
programming for side B.
Notes on tape programming
●
To check, cancel or correct program data, refer to page 13.
Up to a maximum of 40 tracks can be programmed from
●
7
Follow step 3–4.
among any or all of the five discs loaded on the disc tray. If,
however, the PAUSE mode is inserted, each PAUSE is
counted as one track.
●
This function can be used to program up to track number 20.
If the disc has more than 20 tracks, track number 21 and
thereafter will not be programmed.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Shows the side of the tape and the program number for the
track to be set next.
Display information during programming
➀
Shows the selected disc and track number.
Shows the total remaining time on the side of the tape.
Programmed track numbers illuminate and unprogrammed
ones flash on and off.
➁
➂
➃
* If “A-01” does not appear in the display after the PROG
button is pressed, press the TIME display mode-select
button.
➀
➁
➂
➃
■ Random sequential tape programming
The unit will automatically program tracks on a disc in random sequential order for recording to tape.
CDC-845
CDC-745
3, 4
2 3, 4
2
Notes
●
1
Follow step 1 – 5 on page 17.
Because the programmed data changes every time the
RANDOM button is pressed, the amount of time remaining at
the end of the tape also changes accordingly.
If the tape’s length is not enough, all tracks cannot be
programmed. In this case, exchange the tape for a longer one.
In step 2, you can check the program data for side A and
side B.
●
●
2
RANDOM
➀
➁
* The unit will automatically program tracks for side A and
side B separately considering the tape’s total time.
3
4
Begin recording on the tape deck and press the
PLAY/PAUSE button on this unit at the same time.
➂
Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished, and
then it is replaced by the number of the first programmed
track for side A.
Shows the total time of programmed tracks for each side.
Shows the programmed track numbers for each side.
➀
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and,
at the same time, press the PLAY/PAUSE button on
this unit.
➁
➂
●
CD synchronized recording method can be used if your tape
deck is compatible with it.
In this case, in step 3 and 4, press the SYNCHRO button
and then press the PLAY button on this unit’s remote control
transmitter. Recording automatically begins.
(For details, refer to page 21.)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic searching of the peak level on a disc
This convenient feature automatically searches for the part on a disc where the source level peaks, and next plays the part
repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.
CDC-845
CDC-745
2
1
1
3
3
4 2
4
1
2
Stop the unit.
4
0
STOP
PEAK
Select the SINGLE disc play mode.
MODE
Searches the disc for the peak level.
REP
3
Select the disc.
DISC SKIP
REP
Repeatedly plays the part where the source level peaks.
Adjust the recording level on the tape deck listening to
this repeat play.
To cancel this function
Press the STOP button. (Some other buttons can also be
used to cancel this function.)
Notes
This feature will also function in the program play mode. If
program play is being performed, first press the STOP
button, and then press the PEAK button. If program play is
not being performed, only press the PEAK button.
To search for the peak level through all discs on the disc
tray, in step 2, select the ALL disc play mode.
Even if the peak level searching is performed twice or more
•
•
on the same disc, the same part will not be always selected,
because this unit will search for the peak level among parts
on the disc that are randomly selected by the internal
microcomputer.
•
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CD SYNCHRONIZED RECORDING
This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on
tape very easily and more precisely.
This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to
know whether it is compatible or not.)
* This unit and the tape deck must be placed close to each other so that they can receive the signals from this unit’s remote control
transmitter at the same time.
1
4
7
2
5
8
3
6
9
MODE
+10
0
4
5
1
DISC SKIP
DISC
SCAN
SKIP
PAUSE
PLAY
STOP
4
3
SEARCH
INDEX
–
+
OUTPUT LEVEL
SYNCHRO
1
Select the disc.
4
5
If necessary, select the desired track.
SKIP
DISC SKIP
4
or
2
3
Load a tape on the tape deck.
* To record from the beginning of the tape, rewind the
tape to the full end of the supply reel.
* The peak level searching function of this unit is useful
for adjusting recording level on the tape deck. (Refer
to page 20.)
PLAY
Both CD play and tape deck recording begin.
* CD play begins a little later than recording.
SYNCHRO
Notes
To finish or stop the recording, make proper operations on
the tape deck.
•
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this mode, the time display on this unit flashes on
and off.
Programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
page 12–13 for the programming procedure.)
This function can also be used together with the automatic
tape-programming function.
•
•
(Refer to page 17–19.)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Battery installation
Remote control transmitter operation range
1
3
2
Remote control
sensor
Within approximately
7 m (23 feet)
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
●
Use only AA, R6, UM-3 batteries for replacement.
Be sure the polarities are correct. (See the illustration inside
●
Notes
●
the battery compartment.)
There should be no large obstacles between the remote
control transmitter and the main unit.
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter to not work
correctly. In this case, reposition the main unit to avoid
direct lighting.
●
Remove the batteries if the remote control transmitter will
not be used for an extended period of time.
If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
●
●
NOTES ABOUT HANDLING COMPACT DISCS
●
●
This compact-disc player is designed only for playing of
compact discs bearing the mark. Never attempt to load
any other type of disc into the unit.
Compact discs are not affected by small particles of dust or
fingerprints on their playing surface, but even so they should
be kept clean. Wipe by using a clean, dry cloth. Do not
wipe with a circular motion; wipe straight outward from the
center.
The unit will also play 3-inch (8-cm) compact discs.
●
To remove a disc from its storage case, open the case and
then press down at the center; with a finger through the
center hole and the outer edges held as shown in the
illustration, lift the disc out carefully.
●
●
Do not try to clean the disc’s surface by using any type of
disc cleaner, record spray, anti-static spray or liquid, or any
other chemical-based liquid, because such substances
might irreparably damage the disc’s surface.
●
Always handle the disc with care so that its surface is not
scratched.
Do not expose discs to direct sunlight, high temperature or
high humidity for a long period of time, because these might
warp or otherwise damage the disc.
NO!
●
Compact discs are not subjected to wear during play, but
damage to the disc surface when the disc is being handled
can adversely affect the disc's play.
To play a 3-inch (8-cm) CD
Place it in the inner recessed area of the disc tray. Do not put
a normal (5-inch/12-cm) CD on top of a 3-inch CD.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple
measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit's power cord and
contact your authorized YAMAHA dealer or service center for assistance.
SYMPTOM
PROBABLE CAUSE
REMEDY
The player does not switch ON when the
POWER switch is pressed.
The power cord is not connected or not completely
connected.
Securely connect the power cord.
The disc tray does not close completely.
A foreign object is obstructing the tray.
Carefully check the disc tray and remove the foreign
object.
A disc number does not illuminate in the
display.
The disc has been loaded upside down.
The disc is damaged.
Load the disc correctly.
Check the disc carefully; replace it if necessary.
There is moisture on the laser pickup.
Wait 20 to 30 minutes after switching the unit ON
before trying to play a disc.
Play does not begin.
The disc has been loaded upside down.
The disc is dirty.
Reload the disc with the label side up.
Clean the disc.
Play is delayed, or begins at the wrong
place.
The disc may be scratched or damaged.
Check the disc carefully; replace it if necessary.
No sound.
Improper output cable connections.
Improper amplifier operation.
Connect the cables properly. If the problem
persists, the cables may be defective.
Set the amplifier controls to the correct input
selection.
Sound “skips”.
Sound “hums”.
The player is being subjected to vibrations or
impacts.
Relocate the player.
The disc is dirty.
Clean the disc.
Improper cable connections.
Securely connect the audio cables. If the problem
persists, the cables may be defective.
Noise from a nearby tuner.
The tuner is too close to the player.
The disc may be warped.
Move the tuner and player farther apart.
Replace the disc.
Noise from inside of the disc tray.
The remote control transmitter does not
work.
The batteries of this remote control transmitter are
too weak.
Replace the batteries with new ones.
Direct sunlight or lighting (of an inverter type of
fluorescent lamp etc.) is striking the remote control
sensor of the main unit.
Change position of the main unit.
SPECIFICATIONS
AUDIO SECTION
GENERAL
Power requirements
Fr<eqCuDeCnc-8y4r5e>sp..o..n..s..e............................. 2 Hz – 20 kHz, ±0.3 dB
<CDC-745>..................................... 2 Hz – 20 kHz, ±0.5 dB
De-emphasis equalization ......................................... ±0.5 dB
Harmonic distortion+noise
U.S.A. and Canada models ............................ 120V, 60 Hz
Power consumption ........................................................ 20W
Dimensions (W x H x D) ...................... 435 x 107.5 x 387 mm
(17-1/8” x 4-1/4” x 15-1/4”)
Weight
(w<ithCDL.CP-.8F4.)5>................................. Less than 0.002% (1 kHz)
<CDC-845>................................................................. 6.0 kg
<CDC-745>................................................................. 5.9 kg
Accessories .................................................. Connection cord
Remote control transmitter
<CDC-745>............................... Less than 0.0025% (1 kHz)
S/N<CraDtiCo-845>............................................................... 118 dB
<CDC-745>............................................................... 115 dB
Dynamic range ............................................................. 100 dB
Wow & flutter ................................................... Unmeasurable
Output voltage ................................................................. 2.0V
Headphones output (–20 dB) ............ 200 ± 40 mV/150 ohms
Batteries (size AA, R6,UM-3)
Please note that all specifications are subject to change
without notice.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B.
J
A
WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VR 20240
Download from Www.Somanuals.com. All Manuals Search And Download.
|