CDC-625
Natural Sound Compact Disc Player
5-Disc Carousel Auto-changer
PLAYXCHANGE; Disc changing capability while playing another
Random Access Programmable Play
Random-Sequence Play
Single Track/Entire Disc/All Disc Repeat Play
Remote Control Capability
Thank you for selecting this YAMAHA Compact Disc Player.
CAUTION
RISK OF ELECTRIC SHOCK
OWNER’S MANUAL
DO NOT OPEN
CONTENTS
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER-SERVICEABLE
PARTS INSIDE, REFER SERVICING TO
Safety Instructions.................... 2
Connections ............................. 4
Identification of Components.... 5
Loading the Disc/Disc Play....... 6
QUALIFIED SERVICE PERSONNEL.
IMPORTANT!
Please record the serial number of this
unit in the space below.
Explanation of Graphical Symbols
•
Random-Sequence Play .......... 9
Program Play.......................... 10
Repeat Play............................ 12
Index Search .......................... 12
Notes about the Remote
Control Transmitter................. 13
Notes about Handling
Compact Discs....................... 13
Troubleshooting...................... 14
Specifications......................... 14
Model:
Serial No.:
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The serial number is located on the rear
of the unit.
Retain this Owner’s Manual in a safe
place for future reference.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT
1
2
To ensure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
9. To prevent damage by lightning, disconnect the power
cord from the household AC outlet during an electrical
storm.
Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers,
motors). To prevent fire or electrical shock, do not expose
to rain and water.
10. When disconnecting the power cord from the household
AC outlet, grasp the plug; do not pull the cord.
11. When moving the unit, be sure to first disconnect the
power cord from the household AC outlet, and disconnect
cords connected to other equipment.
3
4
5
Do not operate the unit upside-down. It may overheat,
possibly causing damage.
Never open the cabinet. If a foreign object drops into the
set, contact your dealer.
CAUTION FOR CARRYING THIS UNIT
Be sure not to carry or tip the unit with discs remaining in it.
Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
CAUTION FOR MOVING THIS UNIT
When moving this unit, first remove all discs from the disc tray and
close the tray by pressing the OPEN/CLOSE button, and then
switch off the power after you confirm that the display indicates as
follows.
6
7
Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit
is faulty.
Never switch off the power if the display is not pictured as above,
otherwise the unit will get out of order during moving because the
internal mechanism is not locked.
8. Do not place another component on top of this unit,
because to do so will discolor or damage the surface of
the unit.
WARNING
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personel only.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
To avoid electrical shock, do not open the unit. Refer
servicing to qualified personnel only.
DANGER
DANGER: The use of optical instrument with this product will
increase eye hazard.
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
The apparatus is not disconnected from the AC power
source as long as it is connected to the wall outlet, even if
the apparatus itself is turned off.
Laser Diode Properties
• Material: GaAlAs
• Wavelength: 780nm
• Emission Duration: continuous
• Laser Output: max. 44.6µW*
* This output is the value measured at a distance of about
200mm from the objective lens surface on the Optical Pick-
up Block.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s
often undetectable until it is too late, YAMAHA
and the Electronic Industries Association’s
Consumer Electronics Group recommend you to
avoid prolonged exposure from excessive
volume levels.
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing. Since hearing damage from loud sounds is
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
●
●
●
Before making any connections, switch OFF the power to
the unit and the amplifier or other component.
Connect the “LINE OUT” terminals to the “CD” (or “AUX”)
terminals of the amplifier. If the amplifier does not have
such terminals, use the “TAPE PB” terminals. For additional
details concerning these connections, refer to the operation
instructions for the amplifier being used.
Be sure that the left (L) and right (R) LINE OUT terminals
are connected to the corresponding (left and right) terminals
of the amplifier or other component.
If the placement of this unit causes noise to other
equipment, such as a tuner, separate them from each other.
●
This unit
To AC outlet
Connection cord (included)
Amplifier
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IDENTIFICATION OF COMPONENTS
FRONT PANEL
switch
POWER
DISC-select button
DISC SKIP button
OPEN/CLOSE button
STOP
button
PLAYXCHANGE button
Disc tray
PLAY/PAUSE button
SKIP button
TIME
display mode-
select button
button
SEARCH
PROG button
OUTPUT LEVEL control
Disc play MODE-select button
Display panel
REPEAT button
PHONES jack
RANDOM button
Remote control sensor
REMOTE CONTROL TRANSMITTER
The control functions on the main unit and on the remote-
control transmitter are virtually identical, with the exceptions
described below.
DIMMERbutton
CLEARbutton
Numeric buttons
button
INDEX
*
*
The PLAY/PAUSE button on the main unit has both
the functions of the PLAY button and the PAUSE
button on the remote control transmitter
Remote control transmitter has two DISC SKIP
buttons. Pressing each button will search discs in
the direction shown by the arrow.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING THE DISC/DISC PLAY
6
6 2,4
6,3
1
5
1
2
5
Select the disc play mode (DISC MODE: SINGLE or
ALL) while watching the display.
Shows the selected disc
mode.
Label side
upward
“SINGLE” mode: The unit will play a designated disc only.
“ALL” mode: The unit will play all discs in the tray in
sequence.
6
Disc tray
3
4
* If necessary, select a desired disc by using a DISC-select
button or the DISC SKIP button.
●
Notes
Additionally, you can close the disc tray by pressing the
PLAY/PAUSE button, a DISC-select button, a numeric
button (on the remote control transmitter) or the RANDOM
button, or by pressing the front edge of the disc tray gently.
If the tray is closed in these ways, play will begin
automatically, however, the display will not show the total
number of tracks and the total recorded time of the first disc
to be played.
●
After closing the disc tray by pressing the OPEN/CLOSE
button in the stop mode or after selecting any disc by using
the DISC SKIP button, the display shows the total number
of tracks and the total recorded time of the disc to be played
for a few seconds.
PLAYXCHANGE
During play, you can open the disc tray by pressing the
PLAYXCHANGE button without interrupting disc play.
However, in this case, pressing the DISC SKIP button has no
effect.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop play temporarily
To stop play completely
or
* To resume play, press the PLAY/PAUSE button again
(or press the PLAY or PAUSE button on the remote control
transmitter).
To play a desired track on the disc
DIRECT PLAY
Select a desired track by using the numeric buttons on the
remote control transmitter.
SKIP PLAY
●
To play from the beginning of the track following the one
now playing
●
To play from the beginning of the track now playing
The selected track
number is displayed.
●
To play from the beginning of the track before the one now
playing
Example: To select track 25
Press
twice, then immediately press
once.
➀
➁
(twice)
➁
➀
* These operations can also be performed when the unit is in
the pause or stop mode.
* If a track number higher than the highest track number on
the disc is selected, the last track on the disc will be played.
Encloses the tray number of the disc standing by to be
played or the disc now playing.
Display information at disc play
➀
Shows the tray numbers with discs.
Shows the track number to be played.
Shows the time displays. (Refer to “Selecting time
displays” on the next page.)
➁
➂
➀
➁ ➂
➃
➃
Displays the numbers that correspond to the numbers of
➄
the tracks (as high as number 20) on the disc. After each
track is played, its corresponding number disappears so
the number of remaining tracks (and their numbers) can be
seen at a glance.
➄
7
Download from Www.Somanuals.com. All Manuals Search And Download.
To advance or reverse play rapidly (MANUAL SEARCH)
●
The sound can be heard (although slightly garbled) during
To advance rapidly
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
Manual search can also be performed while disc play is
paused , though no sound will be heard.
●
(press and hold)
To reverse rapidly
(press and hold)
Selecting time displays
You can select any of the four time displays by pressing the TIME display mode-select button.
Elapsed time of the track now playing
➀
Total remaining time on the disc
➃
Total disc play time
Remaining time of the track now playing
➂
➁
Notes
The remaining time
●
will not be displayed for track
➁
number 21 or higher.
You can also select one of the three levels of brightness of
the display by pressing the
●
DIMMER button.
When you listen with headphones
Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL control. At that time, note
that this adjustment will also vary the level of the signal output to the amplifier.
or
8
Download from Www.Somanuals.com. All Manuals Search And Download.
RANDOM-SEQUENCE PLAY
You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or any
desired disc in the disc tray.
2
4
3
1
2
3
Select whether to play one disc or all discs in the tray.
* If the “SINGLE” disc play mode is selected, next select a
desired disc by using the DISC SKIP button or a DISC-
select button.
4
Notes
To cancel random-sequence play
Press the STOP button or RANDOM button once again, or
open the disc tray by pressing the OPEN/CLOSE button.
●
This feature will not function during programming, or during
programmed play.
●
If the POWER switch is set off when the random-sequence
play mode is functioning, when the POWER switch is set on
again, the unit will begin the random-sequence play
automatically. (This feature is available for the timer play.)
●
If the SKIP
play, the next randomly programmed track will be played. If
the SKIP button is pressed, play will return to the
beginning of the track now being played.
button is pressed during random-sequence
●
●
This indication appears while the unit is
mixing up tracks.
Total remaining time on the disc will not be displayed during
random-sequence play.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAM PLAY
You can enjoy listening to your favorite tracks selected from one or plural discs in any desired order using a programmed play.
* The use of the remote control transmitter is recommended for easier operations.
2
3
5
1
4
5
1
or
3
3
4 2
Stop the unit.
1
Select the desired track.
4
or
(Select a track
number.)
or
2
3
or
(Press once.)
*Repeat steps 3 and 4 to set more programs.
When the programming is completed;
5
If necessary, select the desired disc.
or
or
Shows the program number for the track to be set next.
Shows the selected disc and track number.
Shows the total time of the tracks currently programmed, if
tracks are selected from one disc only.
Display information during program play
➀
➁
➂
Shows only the numbers of programmed tracks.
➃
* If “P-01” does not appear in the display after the PROG
button is pressed, press the TIME display mode-select
button.
➀
➁
➂
* If the total time reaches 100 minutes or more, only the last
two-digits will be displayed for the three-digit number.
➃
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
●
●
You can set as many as 20 programs at a stretch.
If, during program setting, the TIME display mode-select
button is pressed, the program number display can be
changed to display the total time of the programmed tracks
or no information. To return to the previous display, press
the TIME display mode-select button once again.
●
If you will make program setting with the DISC 1 tray empty,
be sure to press the DISC SKIP button before starting
program setting.
●
●
The total time of the programed tracks will not be displayed,
if tracks are selected from more than one disc.
The total time of the programmed tracks will not be
displayed, if the number of track higher than 20 is
programmed.
●
●
The SKIP (
playing, but only within the range of the programmed tracks.
The SEARCH ( and ) button can be used during
and
) button can be used during
playing to search through all tracks, including
unprogrammed tracks.
To stop program play
To check programmed data
●
Press the STOP button. The first track number
programmed will be displayed.
To resume play, press the PLAY/PAUSE button. Play will
1. If the unit is in the play mode, press the STOP button.
2. Press the PROG button.
●
3. Each time the SKIP
button is pressed, the track
begin from the beginning of the program.
numbers and sequential order of the programmed tracks
can be checked one after another. The display of the track
number can be returned (sequentially in reverse order) by
To cancel a programmed setting
pressing the SKIP
button.
There are several methods, as described below.
Press the CLEAR button on the remote-control transmitter
●
To correct programmed data
while the unit is stopped.
Press the STOP button while the unit is stopped.
Open the disc tray.
Switch off the power.
●
1. Follow the procedure described in “To check programmed
data”.
2. Display the track number to be corrected by pressing the
SKIP button.
●
●
3. Press a numeric button on the remote control transmitter to
select a track to replace the one displayed. The previously
programmed track will be cleared from the memory and the
new one will be programmed.
4. After the correction has been completed, press the PROG
button or PLAY/PAUSE button once again.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT PLAY
You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will
change whenever you press the REPEAT button.
SINGLE REPEAT (S REP)
A single track is repeatedly played.
* This is also available in the programmed-play mode and the
random-sequence play mode.(If the repeat play mode is
switched off, the programmed-play mode or the random-
(OFF)
sequence play mode will be resumed.)
FULL REPEAT (F REP)
In the “SINGLE” disc play mode: A designated disc is played
or
repeatedly.
In the “ALL” disc play mode: All discs in the disc tray are
repeatedly played.
* In the programmed-play mode, all programmed tracks are
repeatedly played.
* In the random-sequence play mode, all randomly sequenced
tracks are repeatedly played in the same order.
INDEX SEARCH
If the disc includes index numbers, play can be started from any desired index number.
To cancel the index search function
Press the INDEX button.
1
Select a track which has index numbers.
Notes
●
Not all discs have index numbers. The index system is a
method for sub-dividing tracks into smaller divisions (such
as, for example, the movements within classical
symphonies) for easier location of those parts. The liner
notes with the disc usually tell if such index numbers are
included.
If an index number is selected that is higher than any index
number on that disc, play will start from the last index
number point on the disc.
●
2
3
●
●
●
For some discs, play may begin slightly prior to the actual
designated index point.
If the disc has no encoded index points, play will begin from
the start of the selected track.
The index number can be designated only while the INDEX
number display is illuminated.
Select the desired index number.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Battery installation
Remote-control transmitter operation range
1
3
Remote control
sensor
2
Within approximately
7 m (23 feet)
Battery replacement
If you find that the remote-control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
●
Use only “AA” (R6) batteries for replacement.
Be sure the polarities are correct. (See the illustration inside
●
Notes
●
the battery compartment.)
There should be no large obstacles between the remote-
control transmitter and the main unit.
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote-control transmitter to not work
correctly. In this case, reposition the main unit to avoid
direct lightening.
●
Remove the batteries if the remote-control transmitter will
not be used for an extended period of time.
If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
●
●
NOTES ABOUT HANDLING COMPACT DISCS
●
●
This compact-disc player is designed only for playing of
compact discs bearing the mark. Never attempt to
load any other type of disc into the unit.
Compact discs are not affected by small particles of dust or
fingerprints on their playing surface, but even so they should
be kept clean. Wipe by using a clean, dry cloth. Do not
wipe with a circular motion; wipe straight outward from the
center.
The unit will also play 3-inch (8-cm) compact discs.
●
To remove a disc from its storage case, open the case and
then press down at the center; with a finger through the
center hole and the outer edges held as shown in the
illustration, lift the disc out carefully.
●
●
Do not try to clean the disc's surface by using any type of
disc cleaner, record spray, anti-static spray or liquid, or any
other chemical-based liquid, because such substances
might irreparably damage the disc's surface.
●
Always handle the disc with care so that its surface is not
scratched.
Do not expose discs to direct sunlight, high temperature or
high humidity for a long period of time, because these might
warp or otherwise damage the disc.
NO!
●
Compact discs are not subjected to wear during play, but
damage to the disc surface when the disc is being handled
can adversely affect the disc's play.
To play a 3-inch (8-cm) CD
Place it in the inner recessed area of the disc tray. Do not put
a normal (5-inch/12-cm) CD on top of a 3-inch CD.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple
measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit's power cord and
contact your authorized YAMAHA dealer or service center for assistance.
SYMPTOM
PROBABLE CAUSE
REMEDY
The player does not switch ON when the
POWER switch is pressed.
The power cord is not connected or not completely
connected.
Securely connect the power cord.
The disc tray does not close completely.
A foreign object is obstructing the tray.
Carefully check the disc tray and remove the foreign
object.
A disc number does not illuminate in the
display.
The disc has been loaded upside down.
The disc is damaged.
Load the disc correctly.
Check the disc carefully; replace it if necessary.
There is moisture on the laser pickup.
Wait 20 to 30 minutes after switching the unit ON
before trying to play a disc.
Play does not begin.
The disc has been loaded upside down.
The disc is dirty.
Reload the disc with the label side up.
Clean the disc.
Play is delayed, or begins at the wrong
place.
The disc may be scratched or damaged.
Check the disc carefully; replace it if necessary.
No sound.
Improper output cable connections.
Improper amplifier operation.
Connect the cables properly. If the problem
persists, the cables may be defective.
Set the amplifier controls to the correct input
selection.
Sound “skips”.
Sound “hums”.
The player is being subjected to vibrations or
impacts.
Relocate the player.
The disc is dirty.
Clean the disc.
Improper cable connections.
Securely connect the audio cables. If the problem
persists, the cables may be defective.
Noise from a nearby tuner.
The tuner is too close to the player.
The disc may be warped.
Move the tuner and player farther apart.
Replace the disc.
Noise from inside of the disc tray.
The remote-control transmitter does not
work.
Direct sunlight or lighting (of an inverter type of
fluorescent lamp etc.) is striking the remote control
sensor of the main unit.
Change position of the main unit.
SPECIFICATIONS
AUDIO SECTION
GENERAL
Frequency response ................... 2 Hz – 20 kHz, +0.5 / –1 dB
De-emphasis equalization ......................................... ±0.5 dB
Harmonic distortion+noise
(with L.P.F.)..................................... Less than 0.004% (1 kHz)
S/N ratio ........................................................................ 108 dB
Dynamic range ............................................................... 98 dB
Wow & flutter ................................................... Unmeasurable
Output voltage ............................................................. 2±0.5V
Headphones output (–20 dB) .................... 200 mV/150 ohms
Power requirements
U.S.A. and Canada models ............................ 120V, 60 Hz
Australia and U.K. models ............................. 240V, 50 Hz
Europe model ..................................................230V, 50 Hz
General model ...................... 110/120/220/240V, 50/60 Hz
Power consumption ........................................................ 20W
Dimensions (W x H x D) ...................... 435 x 107.5 x 387 mm
(17-1/8” x 4-1/4” x 15-1/4”)
Weight ................................................... 6.2 kg (13 lbs. 10 oz.)
Accessories .................................................. Connection cord
Remote control transmitter
Batteries (size “AA”, R6)
Please note that all specifications are subject to change
without notice.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B.
J
A
WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VM62150-3 Printed in Japan BWWR, Y
Download from Www.Somanuals.com. All Manuals Search And Download.
|