Installation Guide
Wyse® VX0L and VX0LE Thin Clients
512-MB RAM Upgrade Option Kit
Issue: 022108
PN: 883884-06L Rev. A
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Thin Client Requirements Compliance
FCC Compliance
Model VX0 thin clients meet Class B requirements.
IEC/EN Compliance
Model VX0 thin client meet Class B requirements.
Canadian DOC Notices
Refer to the previous section, "Thin Client Requirements Compliance," to find out to which Thin Client model each
of the statements below refers.
Class A
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.
Class B
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe B prescrites dans le Réglement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.
IEC/EN Notice
This product conforms to the requirements of IEC950 and EN60950.
This product conforms to requirements of EN55022 for Class A equipment or EN55022 for Class B equipment
Cable Notice
The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or
host devices. Failure to do so may cause interference and violate FCC and international regulations for
electromagnetic interference.
Device Power Supply
Caution
Replace power supply with the same or equivalent type as recommended by the manufacturer.
Model VX0, Product VX0L/LE Thin Clients
For use with External Power Supply Model LSE9802A1255, or certified equivalent model supplied by the
manufacturer, output rated 12Vdc, 4.0A.
Battery Information
Model VX0, Product VX0L/LE thin clients contain a replaceable battery.
Warning
There is a risk of explosion if the battery is replaced by an incorrect type. Always dispose of used
batteries according to the instructions accompanying the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1
1
1
1
1
2
2
2
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Guide
Wyse® VX0L and VX0LE Thin Clients
512-MB RAM Upgrade Option Kit
About This Guide
This guide describes how to install the 512-MB RAM Upgrade Option Kit in a Wyse VX0L
or VX0LE thin client. This guide is intended for users of Wyse VX0L/LE thin clients.
Before You Begin
This section provides information about kit warranty, kit contents, the tools needed, and
accessing Technical Suppport and related online resources.
Kit Warranty
The warranty on this kit assumes the remaining months of warranty of the thin client in
which it is installed, or for 90 days, whichever is greater. Installation of this kit will not void
the factory warranty, however the user will be responsible for damage due to improper
installation.
What’s in the Kit
Included in the kit is the 512-MB RAM module (your module may look different).
Required Tools and Materials
You will need a #1 Phillips Screwdriver and a small Flat-Edge Screwdriver to install the kit.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Warning
The RAM module may be susceptible to damage by Electro-Static Discharge
(ESD). All industry-standard cautions should be followed to avoid ESD.
Caution
Follow all precautions listed in the Quick-Start Guide that came with your thin
client for disconnecting and reconnecting the thin client.
Wyse Technical Support
Customer Support at 1-800-800-WYSE (toll free in U.S. and Canada). Hours of operation
are from 6:00 am to 5:00 pm PST, Monday through Friday.
Related Online Resources Available at Wyse
Wyse thin client features can found in the Datasheet for your specific thin client model.
Administrator, User, and ReadMe documentation for your thin client model are available
Wyse Thin Computing Software is available on the Wyse Web site at:
Installing the Option Kit
To install the 512-MB RAM Upgrade Option Kit in the Wyse VX0L/LE thin client:
1. Perform a proper shutdown of the thin client by ending your session and clicking the
buttons as they appear; then press the power button to turn off the thin client.
2. Unplug the power cord, power adapter, remove all of the cables from the rear of the
unit, and detach the vertical foot.
3. Remove the two screws from the rear of the thin client using a #1 Phillips Screwdriver.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4. Remove the top cover from the thin client by inserting the tip of a small Flat-Edge
Screwdriver just inside the edge of the lock receptacle to make contact with the metal
liner that lines the opening. Apply pressure inward and downward on the metal liner
while pulling up on the plastic housing until it releases.
5. Carefully remove the existing module from the socket, noting where the connector of
the module is located. Push the module locking clamps, swinging them outward, from
each side of the module to unlock it for removal; remove the module.
6. Install the 512-MB RAM module, label facing down, into the location of the original
module at the same angle, and then press module’s raised edge downward until it
snaps in place.
Warning
The RAM module may be susceptible to damage by Electro-Static Discharge
(ESD). All industry-standard cautions should be followed to avoid ESD.
7. Replace the top cover and attach the vertical foot.
8. Proceed to “Verifying the Thin Client’s Operation.”
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Verifying the Thin Client’s Operation
To verify that the thin client works properly:
1. Reconnect the video display, keyboard, mouse, and power adapter to the thin client
before connecting to your electrical outlet; then press the power button on the thin
client.
2. From the desktop, click Start | About to open the Client Information window.
3. Verify that the MAC address and Serial Number matches the serial number and MAC
address on the thin client.
4. Verify that the RAM Configuration is approximately 496 MB.
5. Click OK to close the Client Information window. The thin client is ready for operation
and setup by the Administrator.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Guide
®
Wyse VX0L and VX0LE Thin Clients
512-MB RAM Upgrade Option Kit
Issue: 022108
Written and published by:
Wyse Technology Inc., February 2008
®
®
Created using FrameMaker and Acrobat
Download from Www.Somanuals.com. All Manuals Search And Download.
|