D O W N D R A F T V E N T I L AT I O N
USE & CARE INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F DOWNDRAFT VENTILATION S Y S T E M S
THANK YOU
Your purchase of a Wolf downdraft ventilation
system attests to the importance you place
upon the quality and performance of your
cooking equipment. We understand this impor-
tance and have designed and built your down-
draft with quality materials and workmanship
to give you years of dependable service.
IMPORTANT NOTE: Wolf downdraft ventila-
tion systems are recommended for use with
Wolf framed electric, gas, induction and
multi-function cooktops. They cannot be used
with unframed electric cooktops and are not
recommended for use with the electric grill,
steamer and fryer modules. A Pro ventilation
hood is recommended for use with Wolf dual
fuel ranges, gas ranges, sealed burner range-
tops and gas rangetops.
C O N TAC T
I N F O R M AT I O N
Wolf Customer
Service:
800-332-9513
Before you begin using your downdraft,
please take some time to read this Use & Care
Information. It will be to your benefit to
familiarize yourself with the safety practices,
features, operation and care recommendations
for your downdraft ventilation system.
Website:
wolfappliance.com
IMPORTANT NOTE: A downdraft can be
used with sealed burner rangetop Models
SRT304 and SRT366. An accessory trim kit
(SRT/DDTRIM) is necessary for this installation.
Contact your Wolf dealer for details.
We appreciate your choice of a Wolf Appliance
product and welcome any suggestions or
comments you may have. To share your
opinions with us, please call 800-332-9513.
Any violation of this application may void
your warranty for one or both products.
Your Wolf Appliance product is protected by
a warranty that is one of the finest in the
industry. Take a moment to read the warranty
statement on page 11 and refer to it should
service become necessary.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
S A F E T Y I N S T RU C T I O N S A N D P R E C AU T I O N S
IMPORTANT NOTE: Read all safety
instructions before using this
appliance.
This appliance must be grounded.
For general ventilating use only. Do
not use to exhaust hazardous or
explosive materials and vapors.
Read this Use & Care Information
carefully before using your new
downdraft ventilation system to
reduce the risk of fire, electric shock
or injury to persons.
Ducted fans must always be vented
to the outdoors.
To reduce the risk of fire, use only
steel ductwork.
Installation work and electrical
wiring must be done by qualified
person(s) in accordance with all
applicable codes and standards,
including fire-rated construction
codes and standards.
Do not install this downdraft with
the activating switch directly behind
a burner or element. The minimum
distance between the switch and
edge of the burner should be 4"
(102 mm).
Use this downdraft only in the
manner intended by Wolf Appliance
Company. If you have questions,
contact us at 800-332-9513.
Do not wear loose-fitting or hanging
clothing when operating this appli-
ance. It may be ignited by burners or
elements on the cooktop.
Before servicing or cleaning, switch
power off at the service panel and
lock the service disconnecting
means to prevent power from being
switched on accidentally. When the
service disconnecting means can not
be locked, securely fasten a promi-
nent warning device, such as a tag,
to the service panel.
Children should not be left alone or
unattended in the area where this
appliance is in use.
To reduce the risk of fire and
properly exhaust air, be certain to
duct air outside. Do not vent
exhaust air into spaces within
walls or ceilings or into attics,
crawl spaces or garages.
Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel
burning equipment to prevent back
drafting. Follow the heating equip-
ment manufacturer’s guideline and
safety standards such as those
published by the National Fire
Protection Association (NFPA), the
American Society for Heating,
Refrigeration and Air Conditioning
Engineers (ASHRAE) and the local
code authorities.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not repair or replace any part of
this appliance unless specifically
recommended in this book. All other
service should be performed by a
qualified technician.
TO REDUCE THE RISK OF INJURY TO
PERSONS IN THE EVENT OF A
COOKTOP GREASE FIRE, OBSERVE
THE FOLLOWING:
Smother flames with close-fitting
lid, cookie sheet, or metal tray, then
turn off the burner. Be careful to
prevent burns. If the flames do not
go out immediately, evacuate and
call the fire department.
To avoid motor bearing damage and
noisy and/or unbalanced impellers,
keep drywall spray, construction
dust, etc. off power unit.
When cutting or drilling into wall or
ceiling, do not damage electrical
wiring or other hidden utilities.
Never pick up a flaming pan – you
may be burned.
Please read the specification label
on the downdraft for further infor-
mation and requirements.
Do not use water, including wet
dishcloths or towels – a violent
steam explosion will result.
USE AN EXTINGUISHER ONLY IF:
TO REDUCE THE RISK OF RANGE
TOP GREASE FIRE:
You know you have a Class ABC
extinguisher and you already know
how to operate it.
a) Never leave surface units
unattended at high settings.
Boilovers cause smoking and
greasy spillovers that may
ignite. Heat oils slowly on low
or medium settings.
The fire is small and contained in
the area where it started.
The fire department is being called.
You can fight the fire with your back
b) Always turn hood ON when
cooking at high heat or when
flambeing foods (i.e. Crepes
Suzette, Cherries Jubilee,
Peppercorn Beef Flambe').
to an exit (NFPA Fire Safety Tips).
c) Clean ventilating fans
frequently. Grease should not
be allowed to accumulate on
fan or filter.
d) Use proper pan size. Always use
cookware appropriate for the
size of the surface element.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F DOWNDRAFT F E AT U R E S
DOWNDRAFT F E AT U R E S
Classic, platinum and carbon stainless steel
finishes available on control module and
top cover for Models DD30 and DD36
Stainless steel filter cover with dishwasher
safe aluminum mesh filter
LED indicators
Model DD30
Model DD36
Model DD45
Model DD45 comes standard with a classic
stainless steel control module and top
cover—not available in platinum or carbon
stainless steel finish
9" (229) chimney elevation
Downdraft control kit, available as a sales
accessory for Models DD30 and DD36
(included with Model DD45)—includes
control module, top cover, mounting
brackets, RJ45 connector and mounting
hardware
Internal and remote blower options
Remote-mounted control module
Three-speed blower control
UL listed to US and Canadian safety
standards
Filter clean timer lets you know when the
filter needs cleaning
Two and five year residential warranty—
exclusions apply, see warranty on page 11
Delay-off feature automatically turns unit
off after five minutes, chimney remains up
WO L F
WA R R A N T Y
D OW N D R A F T
Model DD36 shown
Wolf products are
covered by a two
and five year
9" (229) chimney
elevation
Top cover
residential
warranty (exclu-
sions apply). See
warranty details
at the end of this
guide.
Three-speed
blower control
Remote-mounted
control module
Aluminum mesh
filters
Stainless steel
filter covers
Location of rating
plate
6
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F DOWNDRAFT U S E & C A R E
DOWNDRAFT AC C E S S O R I E S
Optional downdraft accessories are available
through your Wolf dealer. To obtain local
dealer information, visit the Locator section of
our website, wolfappliance.com.
C O N T RO L K I T S
IMPORTANT NOTE: The downdraft must be
used with a Wolf-approved control module and
top cover.
The remote-mounted control module and top
cover are available in the classic, platinum and
carbon stainless steel finish for Models DD30
and DD36, and classic stainless steel only for
Model DD45.
B L OW E R O P T I O N S
Wolf downdraft Models DD30I, DD36I and
DD45I include a 500 CFM internal blower.
Models DD30R, DD36R and DD45R are shipped
without a blower assembly and can be used
with the remote blowers listed below. Remote
blowers are available as sales accessories.
The control kit, available as a sales accessory
for Models DD30 and DD36 and included with
Model DD45, includes the control module, top
cover, mounting brackets, RJ45 connector and
mounting hardware.
Models DD30R, DD36R and DD45R
900 CFM Remote Blower
1200 CFM Remote Blower
1500 CFM Remote Blower
801641
801642
804701
Models DD30I and DD30R
Classic Stainless
Platinum Stainless
Carbon Stainless
DD30CONTROL/S
DD30CONTROL/P
DD30CONTROL/B
IMPORTANT NOTE: Blower options vary with
the cooking surface. For recommendations,
refer to the Wolf Design Guide found on the
Wolf website, wolfappliance.com.
Models DD36I and DD36R
Classic Stainless
DD36CONTROL/S
DD36CONTROL/P
DD36CONTROL/B
Platinum Stainless
Carbon Stainless
7
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F DOWNDRAFT U S E & C A R E
D OW N D R A F T CONTROLS
To activate your new Wolf downdraft, press
the UP/DOWN button on the control
module.
In delay-off mode, both the DELAY LED and
the corresponding blower speed LED will
be illuminated.
Once the UP/DOWN button is pressed, the
downdraft blower will turn on at the last
speed used, or on medium for first time
use.
If the blower is on high speed and the
DELAY button is pressed, the blower will
stay on high speed for five minutes. It will
then switch to low speed for an additional
five minutes before turning off. The
chimney will stay up.
To adjust the speed of the blower, press
the HIGH MEDIUM or LOW button. The
,
corresponding LED will illuminate to
indicate the blower speed.
If the blower is on medium speed and the
DELAY button is pressed, the blower will
stay on medium speed for five minutes.
It will then switch to low speed for an
additional five minutes before turning off.
The chimney will stay up.
The LED next to the FILTER button on the
control module will illuminate when it is
time to clean the filters. This indicator light
comes on after approximately 30 hours of
operation. Refer to Filter Care on page 9.
If the blower is on low speed and the
DELAY button is pressed, the blower will
stay on low speed for five minutes before
turning off. The chimney will stay up.
To reset the FILTER clean LED indicator,
press the FILTER button.
If the DELAY button is pressed when the
blower is off or when the chimney is down,
no operation will take place.
D E L AY- O F F F E AT U R E
The delay-off feature will allow the down-
draft blower to continue operating at the
selected speed for approximately five
minutes after the DELAY button has been
pressed. This feature allows you to leave
the cooking area, while the downdraft
system is still in operation, it will then shut
off and the chimney will stay up.
If the DELAY button is pressed when the
unit is already in delay-off mode the delay-
off feature will be cancelled.
Three-speed
Activation button
blower controls
Filter clean LED indicator
Delay-off feature
Downdraft control module
8
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F DOWNDRAFT U S E & C A R E
GENERAL C A R E
Most surfaces of your downdraft ventilation
system are stainless steel or aluminum.
Although these surfaces are resistant to most
stains, they are not totally impervious to
damage. Salt and some cooking liquids may
pit and stain the surface. Always remove these
spills immediately.
Protective Polish: Apply to the surface to
maintain luster and protect from some food
stains. Use a soft, non-abrasive stainless steel
cleaner like Signature Polish (see side note)
and apply with a soft lint-free cloth.
S I G N AT U R E
P O L I S H
FILTER C A R E
IMPORTANT NOTE: Be careful not to soak the
control module. Although they are sealed,
excessive moisture may cause damage to the
controls.
The aluminum mesh filters should be cleaned
approximately every month, depending on
use. The FILTER clean LED on your control
module will illuminate when it is time to clean
the filters. This indicator light comes on after
approximately 30 hours of operation. You may
need to clean the filters more often if your
cooking style generates large amounts of
grease, like frying foods or wok cooking.
Signature Polish
is available from
Signature Limited
Laboratory,
P. O. Box 13436,
Dayton, Ohio
45413-0436, or
call 877-376-5474
(toll free).
C L E A N I N G
Using a clean cloth or sponge, wipe with warm
water and mild detergent. Rinse and dry
immediately. Apply protective polish, always
in the same direction as the grain.
The filters and filter covers are dishwasher
safe and are designed to fit most dishwashers.
IMPORTANT NOTE: Do not use steel wool
pads or abrasive cleaners; they will perma-
nently scratch the surface.
To remove the filters, push down on the filter
frame while pulling the filter out away from
the downdraft. Refer to the illustration below.
Place the aluminum mesh filter and stainless
steel cover into the dishwasher at approxi-
mately 140˚F (60˚C), or hand wash, and use a
biodegradable detergent. When filters are dry,
reinstall using the reverse procedure.
IMPORTANT NOTE: Painted surfaces should
be cleaned with warm water and mild deter-
gent only.
Spray Degreasers: Removes fingerprints and
greasy spatters. Spray on a cloth and wipe the
surface. Buff dry immediately to avoid streaks.
IMPORTANT NOTE: DO NOT operate the
downdraft without filters. This may cause
damage to the blower or other internal
components of the downdraft system.
Hard Water Stains: Use white vinegar and
water.
Downdraft filter removal
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE I N F O R M AT I O N
SERVICE I N F O R M AT I O N
When requesting information, literature,
replacement parts or service, always refer to
the model and serial number of your down-
draft. This information is found on the product
rating plate, located above the airbox on the
front side of the unit. Refer to the illustration
on page 6. Record the rating plate information
below for future reference.
P RO D U C T R E G I S T R AT I O N
Register your new Wolf product today so that
we may ensure your satisfaction. You may
register by one of the following options:
C O N TAC T
I N F O R M AT I O N
1) Mail in the completed Wolf Product
Registration Card.
2) Register online at wolfappliance.com
.
Wolf Customer
Service:
800-332-9513
3) Register by phone by calling the Wolf
Model Number
Customer Service Department at
800-332-9513
.
Website:
Serial Number
wolfappliance.com
The model and serial numbers of your appli-
ance are printed on the enclosed Wolf Product
Registration Card. If you provide us with your
e-mail address, we will send you exciting new
product updates and recipes as they become
available, along with information on special
events.
Installation Date
Wolf Authorized Service Center and Phone
Wolf Dealer and Phone
B E F O R E C A L L I N G F O R S E RV I C E
Before calling your Wolf authorized service
center, check the household fuse or circuit
breaker to see if it has been blown or tripped
and that the electrical connection to the
appliance has not been disconnected. A power
outage may also have caused a disruption in
service.
The information and images are the copyright
property of Wolf Appliance Company, Inc.,
an affiliate of Sub-Zero Freezer Company, Inc.
Neither this book nor any information or images
contained herein may be copied or used in
whole or in part without the express written
permission of Wolf Appliance Company, Inc.,
an affiliate of Sub-Zero Freezer Company, Inc.
©Wolf Appliance Company, Inc. all rights
reserved.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
W O L F A P P L I A N C E P R O D U C T S
L I M I T E D W A R R A N T Y
RESIDENTIAL USE ONLY
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, your Wolf Appliance product warranty covers all
parts and labor to repair or replace any part of the product that proves to be defective in materials
or workmanship. All service provided by Wolf Appliance Company under the above warranty must
be performed by a Wolf Appliance authorized service center, unless otherwise specified by Wolf
Appliance Company. Service will be provided in the home during normal business hours.
LIMITED THIRD THROUGH FIFTH YEAR WARRANTY
From the third through fifth year from the date of original installation, Wolf Appliance Company will
repair or replace the following parts that prove to be defective in materials or workmanship. Labor to
remove and replace defective parts is not covered. Wolf Appliance Company recommends that you
use a Wolf Appliance authorized service center to perform such service.
Gas Burners (excluding appearance), Electric Heating Elements, Blower Motors (vent hoods),
Electronic Control Boards, Magnetron Tubes and Induction Generators
LIMITED LIFETIME WARRANTY
For the life of the product, Wolf Appliance Company will repair or replace any BBQ body or BBQ hood
that rusts through due to defective material or workmanship. Labor to remove and replace defective
parts is not covered. Wolf Appliance Company recommends that you use a Wolf Appliance author-
ized service center to perform such service.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only
to products installed in any one of the fifty states of the United States, the District of Columbia or
the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect
caused by negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT WOLF
APPLIANCE COMPANY, INC. WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY
WARRANTY ARISING BY OPERATION OF LAW. WOLF APPLIANCE COMPANY, INC. WILL NOT BE
RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE
BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR
STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and
you may also have other legal rights that vary from state to state.
To receive parts and/or service and the name of the Wolf Appliance authorized service center
nearest you, contact Wolf Appliance Company, Inc., P.O. Box 44848, Madison, Wisconsin 53744;
check the Locator section of our website, wolfappliance.com, or call 800-332-9513.
*Stainless Steel (classic, platinum and carbon) doors, panels and product frames are covered by a
limited 60 day parts and labor warranty for cosmetic defects.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
WOLF APPLIANCE COMPANY, INC.
P. O. BOX 44848
MADISON, WI 53744
800-332-9513
WOLFAPPLIANCE.COM
8 0 8 2 5 7 R E V- B
1 1 / 2 0 0 6
Download from Www.Somanuals.com. All Manuals Search And Download.
|