White Westinghouse Washer SWS1233CQ S0 User Manual

WASHER  
Models SWX703CQ/S0  
SWS1233CQ/S0  
SWS1339CC1  
Owner's Guide  
LAVADORA  
Manual del Usuario  
SWS1649CQ/S0  
Contents  
ImportantSafetyInstructions .................................................2  
WashingProcedures...........................................................3-4  
Stain Removal ......................................................................5  
CommonWashingProblems .................................................6  
Care and Cleaning ...............................................................7  
Avoid Service Checklist ......................................................8-9  
Español........................................................................ 10-20  
Instrucciones Importantes de Seguridad............................... 10  
Procedimientos para el Lavado.........................................11-13  
Cómo Remover Manchas.................................................13-14  
Problemas Comunes del Lavado........................................  
15  
Limpieza y Cuidado.............................................................16  
Lista de Control de Averías..............................................17-18  
Garantia........................................................................19-20  
.
Product Registration  
Read and Save These Instructions  
Thank you for choosing this  
washer. This owner's guide will  
explain proper operation and care.  
Record Your Model and Serial Numbers  
Record below the model and serial numbers found on the washer  
serial plate located on the underside of the washer lid. Keep these  
numbers for future reference.  
Register Your Product  
Theself-addressedPRODUCT  
REGISTRATIONCARDshouldbe  
filled in completely, signed and  
returned.  
Anote su Número de Modelo y de Serie  
Anote a continuación los números de serie y de modelo que se  
encuentran en la placa de series de la lavadora ubicada en el reverso  
de la tapa de la lavadora. Guarde estos números para futura  
referencia.  
Registro del Producto  
Leagradecemosquehayaseleccio-  
nadoesta lavadora.Enestemanual  
delusuarioencontrarálasintrucciones  
apropiadas para su funcionamiento y  
cuidado.  
Model Number:  
Número de Modelo:  
Serial Number:  
Número de Serie:  
Registre su Producto  
La TARJETA DE REGISTRO DEL  
PRODUCTO ya dirigida debe ser  
llenada, firmada y enviada.  
Purchase Date:  
Fecha de compra:  
P/N 134437100D (0504)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Follow the guidelines below for preparing the wash load.  
Washing Procedures  
Read the Operating Instructions card for operating your specific model.  
Always read and follow fabric care and laundry product labels.  
To reduce the risk of fire, electrical shock, or injury to persons, read  
Important Safety Instructions, pages 2-3, before operating this washer.  
1. Sort laundry into loads that can be washed together.  
Sort items by recommended water temperatures, wash time, and agitate/spin  
speeds.  
Separatewhite,light,andcolorfastitemsfromdarkandnoncolorfastitems.  
Separate items which shed lint from items which attract lint. Permanent  
press, synthetic, knit and corduroy items will pick up lint from towels, rugs  
and chenille bedspreads.  
Separate heavily soiled items from lightly soiled items.  
Separate lacy, sheer and loosely knit items from sturdy items.  
Sortlaundryintoloadsthatcanbe  
washedtogether.  
2. Prepare items for washing.  
Empty pockets.  
Brush off lint and dirt. Shake out rugs and beach towels.  
Closezippers,fastenhooks,tiestringsandsashes,andremovenonwashable  
trims and ornaments.  
Remove pins, decorative buttons, belt buckles, and other objects which  
could be damaged. This also helps protect other items in the wash load.  
Mend rips and tears to prevent further damage during washing.  
Placedelicateitemssuchasbras,shoulderpads,hosiery,andbeltsinamesh  
bag to prevent tangling during the wash cycle.  
Turn knit items inside out to prevent pilling.  
Emptypockets.  
3. Pretreat stains and heavy soil.  
See Stain Removal, pages 6-7, for details.  
4. Add a measured amount of detergent to the wash tub  
before adding the laundry load.  
Follow detergent manufacturer's directions. The amount required depends on  
type of detergent, load size and soil level, and water hardness.  
5. Ifdesired,addliquidbleachtoBleachDispenser(somemodels).  
Before adding the wash load, add liquid bleach to bleach dispenser located  
in left front corner under the lid:  
Placedelicateitemsinameshbag.  
3/4 cup (180 ml) for small loads  
1 cup (240 ml) for large loads  
1-1/4 cups (300 ml) for extra-large loads.  
Then add 1 cup (240 ml) water to flush the dispenser.  
Do not use powdered bleach in the bleach dispenser.  
Formodelswithoutableachdispenser,dilutetherecommendedamountof  
liquid chlorine bleach in 1 quart (.95 L) water. Add it to wash water after  
a few minutes of agitation. Do not pour bleach directly on wash load.  
BleachDispenser(somemodels)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Add laundry load to washer.  
Washing Procedures(continued)  
Dry load level should not be higher than top row of holes in wash tub.  
Do not overload washer.  
Do not put items on top of agitator or wrap them around it. Load items  
evenly.  
Combine large and small items in a load. Load large items first. Large items  
should not be more than half the total wash load.  
When washing a single heavy item, add 1 or 2 towels to balance the load.  
7. If desired, add liquid fabric softener to Fabric Softener  
Do not load items above  
top row of holes in wash tub.  
Dispenser (some models).  
For models with a built-in dispenser (see picture to the left):  
1. Addliquidsoftenertothedispenser,followingfabricsoftenerlabeldirections.  
2. Add water to bring liquid level to fill line on dispenser cap.  
3. Remove the dispenser from the agitator after each use. Rinse both cap and  
cup with warm water. Replace dispenser in the agitator.  
NOTE:Toseparatecapfromcup,putthumbintodispenserandpushagainstside  
ofcup(seepicturetotheleft). Aftercleaning, pushcapandcupfirmlytogether.  
Replacedispenserbylininguptheribsandgroovesandsnappingitintoposition.  
Fabric softener will be flushed from area under the built-in fabric softener  
dispenserwhenLargeLoadWaterLevelisselected.Ifabuild-upoffabricsoftener  
occurs, clean with hot water. DO NOT REMOVE SERVICE CAP.  
For models with a removable dispenser (see picture below to the left):  
1. Attachfabricsoftenerdispensertotopofagitatorbypressingdowngently.  
2. Add softener to the dispenser, following fabric softener label directions.  
3. Add water to bring liquid level to top of the peg in the center of the cup.  
4. Remove the dispenser from the agitator after each use. Rinse both lid and  
bowl thoroughly with warm water. Reassemble and place dispenser on  
agitator or store it nearby.  
Built-In Fabric Softener Dispenser  
(some models)  
Formodelswithoutafabricsoftenerdispenser,followfabricsoftenerlabel  
directions. Add diluted fabric softener to the final rinse. Do not pour fabric  
softener directly on the wash load.  
8. Set cycle selector knob and washer controls according to  
type, size, and soil level of each load, and detergent used.  
See Operating Instructions card for your specific model controls.  
Built-In Fabric Softener Dispenser  
(some models)  
9. Start the washer.  
Close the washer lid and pull out the cycle selector knob. The washer will not  
agitate or spin with the lid open.  
To stop the washer, push in the cycle selector knob.  
Do not stop and restart washer during a spin when using the fabric softener  
dispenser.  
To change a cycle, push in the cycle selector knob. Turn it clockwise to the  
desired setting. Pull out the knob to restart the washer.  
Removable Fabric Softener Dispenser  
(some models)  
10.Remove items when the cycle is completed.  
For your safety, the lid locks when the tub is spinning. It will remain locked for  
about 1 minute after the tub stops spinning.  
Toopenthelidduringaspin, pushinthecycleselectorknobandwaitabout  
1 minute for the lid lock to release. Do not force open the locked lid.  
Place washed items in automatic dryer, line dry, or dry flat as directed by fabric  
care label. Excess wrinkling, color transfer or odors may develop in items left in  
the washer after the cycle has ended.  
To avoid serious personal injury, do not operate washer if safety lid  
lock is missing or damaged.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safe Stain Removal Procedures  
To reduce the risk of fire or serious injury to persons or property, comply with the  
basic warnings listed below:  
Stain Removal  
Read and comply with all instructions on stain removal products.  
Keep products in their original labeled containers and out of children's reach.  
Thoroughly wash any utensil used.  
Do not combine stain removal products, especially ammonia and chlorine bleach.  
Dangerous fumes may result.  
Never wash items which have been previously cleaned in, washed in, soaked in or spotted  
with gasoline, dry cleaning solvents or other flammable or explosive substances because  
they give off vapors that could ignite or explode.  
Do not combine stain removal products.  
Never use highly flammable solvents, such as gasoline, inside the home. Vapors can  
explode on contact with flames or sparks.  
For successful stain removal:  
Remove stains promptly.  
Determine the kind of stain, then follow recommended treatment in the stain removal  
chart on the next page.  
To pretreat stains, use a prewash product, liquid detergent, or a paste made from  
granular detergent and water.  
Use cold water on unknown stains because hot water can set stains.  
Check care label instructions for treatments to avoid on specific fabrics.  
Check for colorfastness by testing stain remover on an inside seam.  
Rinse and wash items after stain removal.  
Follow fabric care label instructions.  
STAIN  
Adhesive tape, chewing gum,  
rubber cement  
TREATMENT  
Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or  
nonflammable dry cleaning fluid.  
Use product containing enzymes to pretreat or soak stains. Soak for 30 minutes or more. Wash.  
Pretreat stain. Wash using cold water and bleach safe for fabric.  
Baby formula, dairy products,  
egg  
Beverages (coffee, tea, soda,  
juice, alcoholic beverages)  
Rinse with cold water. Rub with bar soap. Or, pretreat or soak with product containing enzymes. Wash using  
bleach safe for fabric.  
Blood  
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.  
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning  
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.  
Candle wax, crayon  
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.  
Pretreat with prewash stain remover or rub with bar soap.  
Chocolate  
Collar or cuff soil, cosmetics  
Dye transfer on white fabric  
Grass  
Use packaged color remover. Wash using bleach safe for fabric.  
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.  
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply  
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse thoroughly. Wash  
using hottest water safe for fabric.  
Grease, oil, tar (butter, fats,  
salad dressing, cooking oils,  
car grease, motor oils)  
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured  
alcohol or nonflammable dry cleaning fluid.  
Ink  
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badly  
mildewed fabrics may be permanently damaged.  
Mildew, scorch  
Brush off dry mud. Pretreat or soak with product containing enzymes.  
Pretreat with prewash stain remover. Wash using bleach safe for fabric.  
Mud  
Mustard, tomato  
Nail polish  
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.  
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.  
WATER BASED: Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed. OIL  
BASED AND VARNISH: Use solvent recommended on can label. Rinse thoroughly before washing.  
Paint, varnish  
Perspiration  
Use prewash stain remover or rub with bar soap. Rinse. Wash using nonchlorine bleach in hottest water safe for  
fabric.  
For spots, use rust remover safe for fabric. For discoloration of an entire load, use nonchlorine bleach. Do not use  
chlorine bleach because it may intensify discoloration.  
Rust, brown or yellow  
discoloration  
LIQUID: Pretreat with a paste of granular detergent and water. PASTE: Scrape residue from fabric. Pretreat with  
prewash stain remover or nonflammable dry cleaning fluid. Rinse. Rub detergent into dampened area. Wash using  
bleach safe for fabric.  
Shoe polish  
Pretreat or soak in product containing enzymes. Wash using bleach safe for fabric.  
Urine, vomit, mucus, feces  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Common Washing Problems  
Manywashingproblemsinvolvepoorsoilandstainremoval,residuesoflintandscum,andfabricdamage.Forsatisfactorywashing  
results, follow these suggestions provided by The Soap and Detergent Association.  
SOLUTIONS  
PREVENTIVE MEASURES  
PROBLEM  
POSSIBLE CAUSES  
•Add detergent before wash load. Then  
start washer.  
Blue stains  
•Detergent or liquid fabric softener  
did not dissolve or disperse.  
•If caused by detergent, mix 1 cup (240 ml)  
white vinegar with 1 quart (.95 L) water  
in a plastic container. Soak item 1 hour.  
Rinse.  
•Dilute fabric softener with water.  
•If caused by fabric softener, rub stains  
with bar soap. Wash.  
•Rewash with correct amount of  
detergent and hottest water safe for  
fabric. Add bleach safe for fabric.  
•Sort items by soil level and color.  
•Use correct amount of detergent, hottest  
water and bleach safe for fabric.  
Discoloration,  
graying  
•Not enough detergent.  
•Wash water temperature too low.  
•Incorrect sorting.  
•Use correct amount of detergent and  
hottest water safe for fabric.  
Do not pour liquid fabric softener  
directly on fabric. See package directions  
or Washing Procedures for proper  
diluting.  
Greasy, oily stains •Not enough detergent.  
•Undiluted liquid fabric softener  
poured directly on fabric.  
•Treat with prewash stain remover or  
liquid detergent.  
•Increase detergent and water  
temperature. Rewash.  
•Rub fabric softener stains with bar soap.  
Holes, tears, or  
snags  
•Incorrect use of chlorine bleach.  
•Unfastened zippers, hooks,  
buckles.  
•May be irreversible if rips, tears and seams  
cannot be mended.  
•Never pour chlorine bleach directly on  
fabric.  
•Check condition of items before washing.  
See Washing Procedures for preparing  
and loading the wash load.  
•Rips, tears and broken threads.  
•Overloading the washer.  
•Degradation of fabric.  
Lint  
•Incorrect sorting.  
•Reduce load size. Rewash using correct  
water temperature, water level, and  
amount of detergent.  
•Add nonprecipitating water conditioner  
to wash water.  
• Add liquid fabric softener to final rinse.  
•Dry load in dryer.  
•Remove lint with lint brush or roller.  
•See Washing Procedures for sorting and  
preparing the wash load.  
•Do not overload washer.  
•Use correct amount of detergent, water  
temperature and water level.  
•Tissues left in pocket.  
•Overloading the washer.  
•Not enough detergent.  
•Undissolved detergent has left  
residue.  
•Static cling is attracting lint.  
•Load washed too long.  
•Use fabric softener in the washer to  
lubricate fibers.  
•When ironing, use spray starch or fabric  
finish on collars and cuffs.  
Pilling  
•Pilling is normal with synthetic and  
permanent press fabrics. This is due  
to abrasion from normal wear.  
•Use a lint brush or shaver to remove pills.  
(Fibers break off,  
ball up and cling to  
fabric)  
•Turn items inside out to reduce abrasion.  
•Increase water temperature using hottest  
water safe for fabric.  
•Do not overload washer.  
Residue or powder •Undissolved detergent.  
on dark items;  
•Some nonphosphate granular  
Stiff, harsh fabrics. detergents can combine with hard  
•Reduce load size.  
•Add dissolved detergent to tub . Rewash  
load.  
•Use liquid detergent or use nonprecipitating  
water conditioner with nonphosphate  
granular detergent.  
water minerals to form a residue.  
•Mix 1 cup (240 ml) white vinegar to 1  
gallon (3.8 L) warm water in plastic  
container. Soak item. Rinse and rewash.  
•Do not overload washer.  
•Remove items from washer as soon as cycle  
is completed.  
Wrinkling  
•Overloading the washer.  
•Reduce load size.  
•Rinse in cold water with liquid fabric  
softener.  
•Use liquid fabric softener.  
•Wash synthetics frequently using water at  
least 100°F (37°C ) and correct water level.  
Yellow buildup of •Agitation time too short.  
•Soak in detergent booster or product  
containing enzymes.  
•Wash in hot water (120°F/49°C) using full  
permanent press cycle. Increase  
detergent. Add bleach safe for fabric.  
•Or, treat with color remover.  
body soil on  
•Wash water temperature too low.  
•Not enough detergent.  
synthetic fabrics  
•Use nonprecipitating water softener.  
•Before washing, run hot water for a few  
minutes to clear lines.  
•Drain water heater occasionally.  
•For an ongoing problem, install an iron filter  
in your water supply system.  
Yellow or brown  
rust stains  
•Iron or manganese in water supply, •To restore discolored load of whites, use  
water pipes, or water heater.  
rust remover safe for fabric.  
Do not use chlorine bleach to remove  
rust stains. It may intensify  
discoloration.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inside  
Care and Cleaning  
Removeitemsfromthewasherassoonasthecycleends.Excesswrinkling,color  
transfer, and odors may develop in items left in the washer.  
Use care with laundry  
products. They can damage finish on  
the washer.  
Dry the washer top, the area around the lid opening, and the underside of the  
lid. These areas should always be dry before the lid is closed.  
Beforecleaningthewasherinterior,unplugtheelectricalpowercordtoavoid  
electrical shock hazards.  
When extremely soiled items have been washed, a dirty residue may remain on  
the tub. Remove this by wiping the tub with a nonabrasive household cleanser.  
Rinsethoroughlywithwater.  
The agitator or tub may become stained from fabric dye. Clean these parts with  
a nonabrasive household cleanser. This prevents dye transfer to future loads.  
Outside  
When washing is completed, wipe top and sides of washer with a damp cloth.  
Turn water faucets off to prevent pressure build-up in the hoses.  
Asneeded,cleanthecabinetwithmildsoapandwater.Neveruseharsh,gritty  
orabrasivecleansers.Iftoporlidbecomesstained,cleanwithdilutedchlorine  
bleach [1/2 cup (120 ml) in 1 quart (.95 L) water]. Rinse several times with clear  
water.  
Remove glue residue from tape or labels with a mixture of warm water and mild  
detergent. Or, touch residue with the sticky side of the tape or label.  
Beforemovingthewasher,placeastripofcardboardorthinfiberboardunder  
the front leveling legs to prevent floor damage.  
WinterizingInstructions  
If the washer is stored in an area where freezing can occur or moved in freezing  
temperatures,followthesewinterizinginstructionstopreventdamagetothewasher:  
1. Turn off water supply faucets.  
FollowWinterizing  
Instructions for cold  
weather care.  
2. Disconnect hoses from water supply and drain water from hoses.  
3. Plug electrical cord into a properly grounded electrical outlet.  
4. Add 1 gallon nontoxic recreational vehicle (RV) antifreeze to empty wash tub.  
Close lid.  
5. Set cycle selector knob at a spin setting. Pull out knob and let washer spin for  
1 minute to drain out all water. Not all of the RV antifreeze will be expelled.  
6. Push in knob, unplug electrical power cord, dry tub interior, and close lid.  
7. Store washer in an upright position.  
8. To remove antifreeze from washer after storage, run empty washer through a  
complete cycle using detergent. Do not add wash load.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before calling for service, review this list. It may save both time and expense. The list includes  
common concerns that are not the result of defective workmanship or materials in this washer.  
Avoid Service  
Checklist  
OCCURRENCE  
POSSIBLE CAUSE  
SOLUTION  
NOISE  
A certain amount of "clunking" or gear  
sounds are normal in a heavy-duty  
washer.  
"Clunking"  
sounds.  
or  
gear  
This is normal.  
Foreign objects such as coins or safety  
pins may be in tub or pump.  
Rattling and clanking  
noise.  
Stop washer and check tub. If noise continues after  
washer is restarted, objects may be in pump. Call your  
authorized servicer.  
Belt buckles and metal fasteners are  
hitting wash tub.  
To prevent unnecessary noise and damage to tub,  
fasten fasteners and turn items inside out.  
Washer is overloaded.  
Squealing sound or hot  
rubber odor.  
Do not overload washer. Stop washer and reduce  
load.  
Heavy wash loads may produce a  
thumping sound.  
Thumping sound.  
This is usually normal. If sound continues, washer is  
probably out of balance. Stop washer and redistribute  
wash load.  
Washer is not resting firmly on floor.  
Vibrating noise.  
Move washer so it rests firmly on floor. Adjust leveling  
legs. See INSTALLATION INSTRUCTIONS for details.  
Shipping bolt and block have not been  
removed during installation.  
See INSTALLATION INSTRUCTIONS for removing  
shipping bolt and block.  
Wash load unevenly distributed in tub.  
Stop washer and rearrange wash load.  
Make sure plug fits tightly in wall outlet.  
OPERATING  
Electrical power cord may not be plugged  
in or connection may be loose.  
Washer does not start.  
Housefuseblown, circuitbreakertripped,  
or a power outage has occurred.  
Reset circuit breaker or replace fuse. Do not increase  
fuse capacity. If problem is a circuit overload, have it  
corrected by a qualified electrician. If problem is a  
power outage, call local electric company.  
Water supply faucets are not turned on.  
Cycle selector is not in correct position.  
Motor is overheated.  
Turn on water supply faucets.  
Move indicator clockwise slightly. Pull out knob.  
Washer motor will stop if it becomes overheated. It  
will automatically restart after a cool down period of  
up to 30 minutes (if washer has not been manually  
turned off).  
Lid is not completely closed.  
Heavily soiled items.  
Washer won't spin.  
Close lid completely.  
Wipe tub with a nonabrasive household cleanser, then  
rinse. Shake or brush excess dirt and sand from items  
before washing.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
POSSIBLE CAUSE  
SOLUTION  
OCCURRENCE  
WATER  
Residue left in tub.  
Wash load too wet after  
spin.  
Washer is overloaded.  
Do not overload washer. See Washing  
Procedures.  
Load is out of balance.  
Rearrange load to allow proper spinning.  
Straighten drain hose.  
Drain hose is kinked.  
Water does not enter  
washer or it enters  
slowly.  
Water supply is not adequate in area.  
Check another faucet in the house. Wait until  
water supply and pressure increase.  
Water supply faucets are not completely  
open.  
Fully open hot and cold faucets.  
Water is being used elsewhere in the house.  
Water pressure must be at least 30 psi (260 kPa).  
Avoid running water elsewhere while washer is  
filling.  
Water level does not  
cover load.  
Water inlet hoses are kinked.  
Straighten hoses.  
Improper water level selection (for models  
with  
Select higher water level/load size.  
water level/load size control).  
Washer is overloaded.  
Do not overload washer. When control is set at  
highest fill level, dry load level should not be  
higher than top row of circular holes in wash tub.  
Warm or hot water is not  
hot enough.  
Hot water heater is set too low or is a distance  
from washer.  
Measure hot water temperature at nearby faucet  
with candy or meat thermometer. Water  
temperature should be at least 130°F (70°C).  
Adjust water heater as necessary.  
Hot water is being used elsewhere in the  
house.  
Avoid using hot water elsewhere before or during  
washer use. There may not be enough hot water  
available for proper cleaning. If problem persists,  
your hot water system may be unable to support  
more than 1 use at a time.  
Water in washer does not  
drain or drains slowly.  
Drain hose is kinked or clogged.  
Clean and straighten the drain hose.  
Water leaks.  
Fill hose connection at faucet or washer.  
Check and tighten hose connections. Install rubber  
sealing washers provided.  
House drain pipes are clogged.  
Oversudsing.  
Unclog drain pipes. Contact plumber if necessary.  
Use less detergent.  
Incorrect wash and rinse  
temperatures.  
Hot and cold water hoses are connected to  
wrong supply faucets.  
Connect hot water hose to hot water faucet and  
cold water hose to cold water faucet.  
Water is entering washer  
but tub does not fill.  
Drain hose standpipe is incorrect height.  
Standpipe must be a minimum of 33" (83.82 cm)  
high to prevent siphoning. See INSTALLATION  
INSTRUCTIONS.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  

Westinghouse Indoor Furnishings 100405 User Manual
Westinghouse Landscape Lighting 11704 User Manual
Westinghouse Outdoor Ceiling Fan mh10 User Manual
Whirlpool Ice Maker GSF26C5EXA User Manual
White Rodgers Electric Heater 21M51U 843 User Manual
Yamaha Musical Instrument CLP 811 User Manual
Zanussi Clothes Dryer TD 4112 W User Manual
Zanussi Cooktop 200228 User Manual
Zanussi Range 200143 User Manual
Zenoah Blower BM40S User Manual