OWNER’S MANUAL
1783/1793
SE
LASER-RADAR
DETECTOR
The Whistler Group Corporate Headquarters
13016 N. Walton Blvd. • Bentonville, AR 72712
Tel (479) 273-6012 • Fax (479) 273-2927
Customer Return Center
1201 N. Dixieland Rd. • Rogers, AR 72756
Customer Service Tel (800) 531-0004
www.whistlergroup.com
©
2003 The Whistler Group, Inc.
ad from WPw/wN.2S03o33m6,aRnEVua1 ls.com. All Manuals Search And Do
INTRODUCTION
TABLE OF CONTENTS
WHISTLER FEATURES
Model Features Summary........................ 3 - 4
Installation............................................... 5 - 6
• Mounting Guidelines
Feature Listing of 1783 and 1793 SE
Dear Whistler Owner,
If you have questions concerning the
operation of this Whistler product
please call:
With the change in time also comes change in technology.
Radar gun manufacturers have stepped up to the plate.
The new arsenal they carry is called POP™ Mode. This new
gun is a normal K or Ka band radar gun detectable by
most radar detectors made in the past 30 years, unless
the gun is placed in POP™ Mode. POP™ Mode is a feature
on some newer radar guns operating on K or Ka bands.
When the gun is in POP™ Mode and activated, a brief burst
of energy, less that 1/10 of a second, is transmitted and
the vehicles’s speed is quickly acquired. A detector without
POP™ Mode detection capability cannot respond to this
brief transmission. This detector has the power to report
this new gun where other detectors cannot! - until now!
Whistler introduces the 1783 and 1793 SE with POP™
Mode detection! These units are the beginning in total
protection. With POP™ Mode detection, these units can
react fast enough to detect this new technology. Packed
with power you still have a full featured radar detector:
• Digital Compass
• 3 City Modes
• Quiet Mode
• Windshield Mounting
®
• Real Voice
• Power Connection And Fuse Replacement
Operation................................................ 6 - 15
• Compass Calibration
• High Visibility Text Display
• POP™ Mode Detection
Capabilities
• Auto Quiet
• Vehicle Battery Saver
• Setting Saver
• Dim/Dark Mode
• Stay Alert™
• Power On and Self-Test
CuSTOmer SeRVICE
• All Band™
• Setting Saver
• 360° Protection
• Feature Engaged Confirmation
• Audio Level Adjustment
• Integrated Real Voice®
• VG-2 Cloaking™ Technology
• Safety Warning System™
Selectable Bands
• Tutorial Mode
1-800-531-0004
Monday - Friday • 8:00 am - 5:00 pm CT
• Compass Mode
• Auto Quiet Mode
or visit our website
www.whistlergroup.com
• Quiet Mode
1783
1793 SE
• City/City 1/ City 2 Mode
• Highway Mode
6
6
12
12
• Dim/Dark Mode
Please keep the receipt in a safe place.
You may register your product online
at www.whistlergroup.com. For warranty
verification purposes, a copy of your
dated store receipt must still accompany
any unit sent in for warranty work. If
the unit is returned without a dated
store receipt an out of warranty service
charge applies. Note: Your warranty
period begins at the time of purchase.
The warranty is validated only by the
dated store receipt! Now is the time to
record the serial number of the unit in
the space provided in the warranty
section of the manual.
• Engaging/Disengaging VG-2
• Teach/Tutorial Mode
• Option Select Mode
2
2
• Vehicle Battery Saver Mode
• Vehicle Battery Monitor
1
1
9
• VOICE MEMO RECORDER digitally records
your voice message (1793 SE only).
• Stay Alert Feature
10
10
• Memo Mode
Safety Warning System™.......................... 15
POP™ Mode Alerts................................... 15
Laser/Radar Alerts................................... 15 - 16
• Speed Radar Audio/Visual Alerts
• Laser Audio/Visual Alerts
9
• COMPASS provides points of direction.
®
7
8
• REAL VOICE ALERTS are given verbally
7
8
11
11
through the detector so you do not have to take
your eyes off the road to look at the display.
• TEXT DISPLAY shows laser-radar information,
VG-2 alerts, SWS messages, and detector status.
• NEW POP™ MODE CAPABILITIES
1793 SE Additional Features
• Memo Voice Recorder
• Vehicle Battery Monitor
1793 SE Accessories:
Windshield Bracket, Power
Cord, Travel Bag and Socket
Multiplier
1783 Accessories:
Windshield Bracket,
Power Cord
®
• Pulse Protection
VG-2 Alerts.............................................. 16-17
• Alert Priority
Reset Features......................................... 17
Troubleshooting Guide............................ 18
Care and Maintenance.............................19
Are Detectors Legal?...............................19
FCC Information.......................................19
Speed Monitoring....................................20 - 22
• Radar Facts
Even though these units are packed full of features, they’re
still very easy to use. To fully utilize your unit to its potential,
we recommend reading this entire manual or visit our
FAQ page on our web site www.whistlergroup.com.
Note: Compass must be calibrated before use!
See Compass Calibration set-up section.
3
• POP™ Mode
• Laser Facts
Enjoy your new Whistler and please drive safely.
• Other Speed Detection Systems
5
Warranty Information...............................23 - 25
Specifications...........................................25
Accessories.............................................. 26
4
Sincerely,
Download from Www.Somanuals.com. All Manuals Search And Download.
The Whistler Group, Inc.
3
FEATURE DESCRIPTIONS
INSTALLATION
INSTALLATION
Whistler’s ergonomic and user-friendly design provides a
new level of operating convenience. Special features
include: Note: Not all units have all features listed.
If the detector is removed, this may cause blistering
of the dash in some vehicles.
Mounting Guidelines
• Mount the unit as low as possible near the center
of the windshield.
• Slide the detector onto the bracket until it locks into place.
• If necessary, the unit may be leveled by bending
the windshield bracket. Press the bracket release
button and remove the detector before bending.
• Do not mount your unit behind wipers, ornaments,
mirrored sunscreens, etc. These obstructions have
metal surfaces which can affect radar and laser
signals and reduce critical warning time. (Regular
tinted glass does not affect reception.)
• Some windshields have an Instaclear™ or
Electriclear™ type coating, which affect radar signals.
Consult your dealer or the owner’s manual supplied
with your vehicle to determine if your windshield
has this coating.
1. Bracket Release Button – Provides quick and
easy release of the mounting bracket.
2. Speaker – Provides distinct audio warnings for X,
K, Ka band radar, safety radar, laser and VG-2.
3. Mounting Bracket Location – Slot holds mounting
bracket firmly.
4. Radar Antenna – Compact, high-efficiency antenna
receives radar signals.
5. Front Laser Antenna – High gain optical lens provides
increased sensitivity and field of view for leading-edge
laser detection.
Power Connection
• Plug the small end of the power cord into the
unit’s power jack.
• Plug the large end into the vehicle’s cigarette lighter.
NOTE: Cord fits tightly into detector. When
installing the cord, expect some resistance.
Fuse Replacement
• Avoid placing unit in direct contact with windshield.
• To reduce the possibility of theft, conceal your unit
when not in use.
The lighter socket plug is equipped with a replaceable
2 amp 3AG fuse located behind the silver tip. To
replace the fuse, carefully unscrew the tip of the plug.
IMPORTANT: Unscrew slowly. The tip contains a
spring which may fly out when disassembling.
Insert the new fuse with the spring and screw on the
tip. With use, screw cap on plug may loosen.
Retighten occasionally.
6. Rear Laser Antenna – An integrated optical
wave-guide provides superior detection of laser
signals transmitted from behind.
Windshield Mounting
• Install the two suction cups and rubber bumper
onto the bracket by fitting them into their holes.
• Press the suction cups onto the windshield at the
location you have chosen. IMPORTANT: Some
newer cars have a plastic safety coating on the
inside of the windshield. The windshield bracket
may leave permanent marks on this type of surface.
To find out if your vehicle has this type of windshield,
check the owner’s manual or ask your dealer. We
recommend that you do not leave the suction cup
bracket on the window in direct sunlight.
7. City Button - Reduces the annoyance of false
alerts typically encountered in urban driving areas.
8. Quiet/Menu Button - Pressing QUIET before a
signal is detected engages Auto Quiet Mode which
automatically reduces the audio level after the
initial warning to a low audio level setting. Pressing
QUIET during a radar/laser encounter silences
audio alerts, while allowing visual alerts to keep
you informed. Pressing and holding for 2 seconds
allows you to enter Option Select Mode (see page 12).
9. Power/Dim Dark - Turns unit on/off and engages
Dim/Dark modes (press and hold for 2 seconds).
10. Volume Up/Down Buttons – Adjust volume up or down.
11. High Visibility Text Display – Provides distinct
visual confirmation of signals detected, signal
strength, and indicates engaged modes of operation.
12. Power Jack – Provides connection for the power cord.
Unscrew the tip of the lighter socket plug carefully when replacing the 2 amp fuse.
OPERATION
Compass Calibration Set-up
The unit will need to be calibrated in order for the
compass to provide accurate readings. To calibrate
the unit, perform the following procedure:
1. Mount the unit level in the center of the vehicle’s
windshield in which it will be used. Make sure
there are no other magnetic sources near the
detector (i.e., speaker).
4
Download from Www.Somanuals.c5om. All Manuals Search And Download.
6
OPERATION
OPERATION
OPERATION
OPERATION
Audio Level Adjustment
City/City 1/City 2 Mode Continued
Auto Quiet Mode Continued
• Press Quiet/Menu (before a signal is detected) to
engage Auto Quiet.
Compass Calibration Set-up Continued
2. Select a large clear area (parking lot or field)
without any power lines.
The audio levels can be adjusted high to low or low
to high, in seven steps.
CAUTION: Some towns/small cities may still be using
X band radar. If Auto Quiet is engaged in City 1 or
City 2 modes and the unit receives a strong radar signal,
the unit performs the Auto Quiet feature. City Modes
do not change the audio alert for laser or VG-2.
• Once the Auto Quiet mode is engaged, you may
cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to
cancel Auto Quiet mode.
3. 1783 only - While parked, press both volume
buttons simultaneously.
1793 Only: Press and hold quiet button until display
says CALMODE. Then press both volume buttons
simultaneously. The display shows (scrolling):
• Press Volume
• Press Volume
up to increase audio level.
down to decrease audio level.
As audio level is adjusted, beeps are provided and
the display indicates volume level.
Highway Mode
Quiet Mode
®
Highway mode provides full audio warnings any time
radar (X, K, Ka, Safety Radar) or laser signals are
detected, and is recommended for open road driving.
Integrated Real Voice
Quiet cancels audio during an alert and any new alert
within 20 seconds. After 20 seconds, approximately
2 beeps are provided on any new alert and unit then
remains quiet.
Drive in two complete circles
When selected, Real Voice® will be used to articulate
the following:
4. If calibration does not automatically finish press both
volume buttons simultaneously to complete calibration.
The unit will beep twice and display, for example:
For more information on City and Highway mode, please visit
our FAQ page on our website: www.whistlergroup.com
1. Band Identification
2. Safety Warning System messages
3. Feature Selection
NOTE: In certain cases the voice message does not
replicate the text message.
• Press Quiet to cancel the audio.
• Press Quiet a second time during an alert to restore
the standard audio alert pattern; or turn the unit
off, then on.
NE 45
CAL DONE
Dim/Dark Mode
Note: If unit mounting is relocated in the vehicle,
(i.e., visor to windshield mounting or dash mounting),
or if the unit is moved to another vehicle, you must
recalibrate the compass.
Dim/Dark Mode reduces the illumination of the display.
•
Press and hold Power for 2 seconds to reduce
illumination to a Dim setting.
City/City 1/City 2 Mode
Compass Mode
•
Pressing and holding the power button for 2 seconds
a second time engages Dark Mode. The display
illumination is further reduced.
Dim or dark can be engaged during an alert. In Dark
Mode, the display goes dark for as long as a signal is
being detected and for 20 seconds after, then the
display returns to the dimmer setting.
Whistler’s Three Stage City Mode is designed to reduce
the annoyance of automatic door openers, intrusion
alarms and other devices which share frequencies with police
radar. Generally X band is used for these devices.
The unit is programmed from the factory in “Combo
Mode”. COMBO mode means that the unit provides
both compass readings as well as detecting laser/radar
signals. Through the “Option Select Mode”, either
laser / radar or compass features can be turned off meaning,
RADAR equals detection of all police bands and laser;
Compass equals no detection of police laser/radar.
Power On and Self-Test
Each time your Whistler detector is turned on, an
automatic self-test sequence confirms that the
speaker and visual displays are functional.
• Press City to cancel Highway mode and engage City.
• Press City a second time engages City 1.
• Press City a third time engages City 2.
• Pressing City a fourth time cancels City Modes and
returns the unit to Highway Mode.
• Press Power or apply Power. Display reads in order:
1. WHISTLER 2. X-band 3. K-band 4. Ka-band
5. LASER
9. POP ON
6. SR ON 7. VG2 OFF 8. B SVR ON
•
Pressing and holding the power button a third
time restores full illumination to the display.
NOTE: The unit must be calibrated to provide accu-
rate compass readings. See Compass Calibration
Set-up section on page 6 & 7.
10. HWY
11. NE 45°
Setting Saver
Engaging/Disengaging VG-2
In City Mode, weak speed/safety radar signal give an
initial alarm of two beeps, and then remains quiet
unless the signal becomes very strong. When the
signal strength increases, two additional beeps are
provided.
City 1 and CIty 2 Modes operate the same as Highway
Mode, but in City 1 Mode, only the X band sensitivity
is lowered. In City 2 Mode, X-band is not detected.
Setting Saver saves your personalized settings so
that when the detector is turned off and then on
again, you do not have to re-enter them.
See option select mode to turn this feature on.
Auto Quiet Mode
Auto Quiet reduces the selected audio level to level
(1) approximately 5 seconds after a radar or safety
radar signal is detected. The alert for any new signal
within 20 seconds will resume at level (1). Auto Quiet
does not affect VG-2 or laser alerts.
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
Feature Engaged Confirmation
• Press City and Quiet simultaneously and release.
• Press Power to exit.
Each time a button is pressed one beep confirms
feature “on”, two beeps confirm feature “off”.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
9
10
OPERATION
OPERATION
OPERATION
Vehicle Battery Saver Mode
Option Select Mode
1793 SE Chart
The Vehicle Battery Saver Mode automatically shuts off
your detector within 3 hours if you forget to turn it off. The
timer is reset if the detector is turned off, unplugged or any
button is pressed before the 3 hours have expired. The detector
will alert you with an audible and visual warning before
it shuts off.
During this warning you can reset the unit by pressing
any button. This will reset the timer.
If the unit has automatically turned itself off, press the Power
button to turn the unit back on. You can manually engage
the Vehicle Battery Saver Mode by pressing and holding
the City button until one beep is heard.
Entering Option Select Mode allows you to customize options
such as Tone Select, Compass Select, Abbreviated Power
Up Sequence and VG-2 Mode. When selecting options,
or quiet must be pressed within 20 seconds or
options mode will automatically be exited. To enter:
Press:
Quiet
Display
Reads:
To Change
Reads:
Option:
Press
the
,
For 2
Cal Mode
Press
Starts Compass
Seconds
Both
Calibration
1st Time
COMBO
OR
Combo= Radar &
Compass
1783 Chart
Radar= Radar Only
Compass= Compass
Only
Press:
Quiet
Display
Reads:
COMBO
To Change: Option:
2nd Time TONE 3
= YES
= NO
Tone 1, 2, 3
(3 different X, K, Ka
For 2
Combo= Radar &
OR
Patterns)
Seconds
Compass
Radar= Radar Only
Compass= Compass
Only
3rd Time
TEST YES
= ON
X, K, Ka Audio tones
Refer to “Option Select Mode” for instructions for
deactivating battery saver mode feature.
= OFF 1 beep during
Power Up
Vehicle Battery Monitor (1793 SE only)
The vehicle’s battery voltage can be momentarily displayed
by pressing and holding both volume buttons for 3 seconds.
4th Time
5th Time
6th Time
7th Time
8th Time
9th Time
X ON
= ON
X Band On
1st Time
TONE 3
= YES
= NO
Tone 1, 2, 3
= OFF X Band Off
(3 different X, K, Ka
Patterns)
K ON
= ON
K Band On
= OFF K Band Off
2nd Time TEST YES
= ON
X, K, Ka Audio tones
Stay Alert Feature
Ka ON
= ON Ka Band On
= OFF Ka Band Off
= ON Laser Band On
= OFF Laser Band Off
= ON Turns VG-2 On
= OFF Turns VG-2 Off
= OFF 1 beep during
Power Up
The Stay Alert Feature is designed to test a driver’s
alertness. To engage (when unit is not alarming) :
LASER ON
VG-2 OFF
SR ON
3rd Time
4th Time
5th Time
6th Time
7th Time
VG-2 OFF
SR ON
= ON
Turns VG-2 On
• Press and hold City for approximately 2 seconds.
Release button during or immediately after the alert
is given. Display reads:
= OFF Turns VG-2 Off
= ON Turns Safety Radar
= ON
Turns Safety Radar On
= OFF On
Within 30-60 seconds two beeps are sounded; to show
alertness, the driver must press either the City, Volume,
or Quiet buttons within 3-5 seconds. If button a is
pressed within 3-5 seconds, the cycle is repeated.
= OFF Turns Safety Radar Off
10th Time VOICE ON
= ON
Real Voice Engaged
VOICE ON
Pop ON
= ON
Real Voice Engaged
= OFF Real Voice
= OFF Real Voice
Disengaged
Pop On
= ON
Pop On
11th Time Pop ON
12th Time B SVR ON
= ON
If a button was not pressed within 3-5 seconds alarm
sounds and the display reads:
• Press Power to exit.
= OFF Pop Off
= OFF Pop Off
= ON
Battery Saver On
B SVR ON
= ON
Battery Saver On
= OFF Battery Saver Off
= OFF Battery Saver Off
WARNING!!! Stay Alert is NOT intended as a substitute
for adequate rest. You should NOT operate a vehicle if you
are drowsy. During extended periods of vehicle operation,
you should take frequent breaks. Improper reliance on the
Stay Alert feature may result in vehicle damage, personal
injury or death. NEVER OPERATE A VEHICLE IF YOU
ARE DROWSY.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
12
13
OPERATION
OPERATION
LASER/RADAR ALERTS
VG-2 ALERTS
Memo Mode (1793 SE only)
Record up to nine distinct message tracks for a total of
90 seconds, one 90 second message or any combination
in between.
Memo Mode Continued
Alert Priority
Speed Radar Audio / Visual Alerts
When two or more signals are received at the same
time, the alert priority is:
1. Laser
To delete a message:
When X, K or Ka is detected the band ID and signal
strength is displayed. The audio alert is continuous
and has a geiger counter-like pattern. The faster the
beep the closer or stronger the radar source.
• Enter Memo mode and press Volume Up or Volume
Down button until selected track appears on the display.
• Press the Quiet/Record button twice.
2. VG-2
IMPORTANT: Unit does not detect radar or laser signals
during recording or while playing a memo.
3. Speed Radar
4. Safety Radar
To exit Memo mode:
• Press both volume buttons and release. The unit
will beep twice.
Laser Audio / Visual Alerts
WARNING!!! Memo mode is not intended to be
used while you are driving. You should not use any
device in a vehicle that may distract you from observ-
ing the road ahead.
When a laser signal is detected the word “Laser” and
signal strength is displayed, the audio alert is continuous
for a minimum of 3 seconds. Example:
Example:
If X band is alerting, then suddenly VG-2 is detected,
the VG-2 warning will override the X band alert.
NOTE: Memo mode automatically exits within 20
seconds if a button is not pressed.
The more “|||” the closer the laser source.
To record or play a message (Memo mode):
• Press both volume buttons for less than 2 seconds
and release. The unit will beep once; this enters
Memo mode. Display reads:
®
RESET FEATURES
Pulse Protection
Pulse (or instant-on) radar is more difficult to detect
than conventional radar because it remains “off” until
activated to measure the speed of a targeted vehicle.
™
Reset Features
SWS
All user features can be reset to factory settings.
MEMO
PLAY
REC
Safety Warning System™
•Unplug Power Cord from unit.
•Press and hold Power and Quiet.
•Plug Power Cord into unit.
•Wait for 2 beeps.
•Release Power and Quiet buttons.
Unit is now reset.
When a pulse type transmission is detected, your Whistler
detector sounds an urgent 3-second audio warning
and the display shows PULSE (like the picture above.
After the 3-second pulse alert, the standard alert pat-
tern continues for as long as the signal is present.
It is important to respond promptly to a pulse alert,
since warning time may be minimal.
In communities where transmitters are located,
the Safety Warning System™ displays over 60 text
messages. When Safety Radar is detected the audio
alert is geiger counter-like.
• Press and release the Quiet/Record button to
begin a recording. Note: Recording starts as
soon as the button is released. Display reads:
REC1 8
REC = record, 1 = track #, 8 = time remaining
Safety Warning System Text
Example: Poor - Road - Surface.
If the recording time expires for a track, the unit will
automatically switch to the next track. Press and release
Quiet/Record again to stop recording. The unit will
automatically stop recording once track 9 is completed.
Default factory settings are:
1. Audio to level (4).
NOTE:
Not all areas have Safety Warning System™ transmitters.
2. Display reads Highway.
3. Dim/Dark Mode to full illumination of display.
4. Auto Quiet Mode OFF.
5. VG-2 Detection Mode OFF.
6. Combo ON.
VG-2 ALERTS
To play a message:
™
VG-2 Audio/Visual Alerts
• Enter Memo mode and press Power/Play to listen
to recorded messages.
POP MODE ALERTS
NOTE: You must turn this feature on in option select
mode before it will detect VG-2.
• To play a selected track, press Volume Up or
Volume Down button until selected track appears
on the display. Display reads:
POP™ Mode Alerts
7. Safety ON.
Because POP™ Mode travels on regular radar bandwith,
there is no particular alert for POP™ Mode transmissions.
POP™ Mode alerts will be displayed as a regular radar alert.
When a VG-2 signal is detected, the detector “hides” its own
radiated signal and becomes undetectable by the VG-2.
8. Vehicle Battery Saver ON.
9. Full Power Up sequence.
10. Default TONE 3.
PLY1 8
Every 30 seconds, the detector checks for a VG-2 signal.
If a VG-2 signal is still present, the unit continues to
hide and repeats the VG-2 alert. If no signal is detected,
two beeps are provided, indicating an “all clear” condition.
During VG-2 Alert X, K, and Ka band signals cannot
be received (Reference page 19 & 20 for VG-2 information).
PLY = play, 1 = track #, 8 = time remaining
11. All Band ON
12. POP ON
• Press the Power/Play button.
13. Unit ON or OFF.
Messages are kept in memory and are not affected by
resetting the factory features. See “Reset Features”
section of the manual.
NOTE: Must calibrate compass after resetting features.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
16
17
14
TROUBLESHOOTING
CARE AND MAINTENANCE
FCC INFORMATION
Your Whistler detector is expertly engineered and
designed to exacting quality standards to provide
you with reliable, trouble-free operation. If your unit
has been correctly installed following the guidelines
in this manual, but is not operating optimally, please
refer to the troubleshooting guide below.
FCC ID HSXWH11 - 1783, 1793 SE
Care And Maintenance
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device many not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
During the summer months, avoid prolonged exposure
to direct sunlight by removing your unit from the dash
when your vehicle is parked for an extended period of
time. Do not spray water, cleaners, or polishes directly
onto the unit. The spray may penetrate through the
openings and damage the unit. Also, do not use any
abrasive cleaners on the units exterior.
PROBLEM: No display or audio.
IMPORTANT
•
Check fuse in Whistler plug; replace if necessary with a 2
amp 3AG type.
FCC requirements state that changes or modifica-
tions not expressly approved by Whistler could void
the user’s authority to operate the equipment.
•
•
Check fuse for lighter socket; replace if necessary.
Make sure lighter socket is clean.
ARE DETECTORS LEGAL?
PROBLEM: Unit alarms when vehicle hits bumps.
•
•
Check for loose lighter socket; tighten and clean.
Check connections at both ends of power cord. Substitute
another cord to determine if cord is defective. Return
defective cord to the factory.
In Most States YES!
SPEED MONITORING
Laser/radar detectors are legal in every state (with
the exception of Virginia and Washington, D.C., which
have local regulations restricting the use of radar
receivers in any vehicle) when used in automobiles or
light trucks (under 10,000 lbs.).
Radar Detector Detectors (VG-2)
The Interceptor VG-2, or simply VG-2, is a microwave
receiver used by police to detect signals radiated by
the local oscillator of a radar detector. Because its
purpose is to identify persons driving with radar detectors,
the VG-2 is known as a “radar detector detector”.
PROBLEM: Unit alarms when using vehicle electrical
accessories (brakes, power mirrors/windows,
turn signals, horn, etc.).
Concerning trucks over 10,000 lbs., the Federal
Highway Administration (FHWA) issued a regulation,
effective January, 1994 which prohibits radar and laser
detector use in these types of vehicles nationally. Prior
to the FHWA regulation, laws existed in the state of
New York restricting the use of radar detectors in trucks
over 18,000 lbs. and in Illinois in trucks over 26,000 lbs.
•
Vehicle’s electrical system, including battery and alternator, may
have electrical noise. Install a filter capacitor (470mfd. 25 volt
or larger capacitance value) on the back of the lighter socket.
The VG-2 is the primary tool used by the police to
identify radar detector equipped vehicles. If caught,
in a state where detectors are illegal, (see page 19),
drivers risk losing their radar detector and receiving a
fine. In addition, instant-on radar is almost always used
in combination with a VG-2, leaving unsuspecting motorists
vulnerable to receiving two tickets - one potentially
for speeding, the other for possession of a detector.
PROBLEM: Unit gives laser alert when accelerating.
•
Possible bad or low quality distributor cap. Replace with
high quality cap.
PROBLEM: Audio alerts are not loud enough.
•
•
Cancel Auto Quiet Mode or City Mode.
Check audio level setting (see page 8 & 9).
If difficulties occur which cannot be solved by information
in this Troubleshooting Guide, please call Whistler
Customer Service at 1-800-531-0004 or visit our FAQ
page at www.whistlergroup.com/faq-detectors.asp,
before returning your unit for service.
Having a radar detector capable of detecting the
VG-2 may alert you to the presence of a speed trap. For
more information on speed monitoring technologies,
please visit our FAQ page on our website:
www.whistlergroup.com
NOTE: It is the responsibility of the individual radar
detector owner to know and understand the laws in your
area regarding the legality of the use of radar detectors.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
19
20
SPEED MONITORING
SPEED MONITORING
WARRANTY INFORMATION
• Because you vehicle’s license plate or headlights
are the laser gun’s primary targets, mounting your
Whistler detector on the dashboard can improve
laser detection at short range.
Consumer Warranty
Radar Facts
This Whistler Laser/Radar detector is warranted to the
original purchaser for a period of one year from the date
of original purchase against all defects in materials and
workmanship (3 years for the 1793 SE). This limited
warranty is void if the unit is abused, modified, installed
improperly, if the housing has been removed, or if the serial
number is missing. There are no express warranties covering
this product other than those set forth in this warranty.
All express or implied warranties for this product are limited
to the above time. Whistler is not liable for damages
arising from the use, misuse, or operation of this product.
A radar gun operates by transmitting radio waves at
certain frequencies which reflect off objects and are
then picked up by the radar gun’s receiving section.
When a radar beam reflects off a moving target, a
measurable frequency shift occurs. The radar unit converts
this shift into miles per hour to determine your vehicle’s
speed. Currently, the FCC (Federal Communications
Commission) permits operation of traffic radar guns
at X Band (10.500 - 10.550 GHz), K Band (24.050 -
24.250 GHz), and Ka Band (33.400 - 36.000 GHz).
• Do not follow closely behind any vehicle you cannot
see through. If you can’t see past a vehicle ahead
of you, chances are your detector won’t either.
• The receiving range of your laser detector will not
be the same as a radar detector. Laser guns are
most often used at short range.
Whistler Laser/Radar detectors receive all current laser
guns which operate at a laser wavelength of 905 +/- 10mm.
Note: A radar detector will not alarm if an officer is
not transmitting on any one of the above radar bands.
•Pro Laser™ I II III
•LT1 20-20
•Ultra Lyte
Service Under Warranty
During the warranty period, defective units will be
repaired without charge to the purchaser when returned
with a dated store receipt to the address below. Units
returned without dated store receipt will be handled
as described in section “Service Out Of Warranty.”
Due to the specialized equipment necessary for testing
a laser/radar receiver, there are no authorized service
stations for Whistler brand detectors other than Whistler.
Laser Tips
POP™ Mode
POP™ Mode is a feature on some newer radar guns
operating on K or Ka bands. When the gun is in POP™
Mode and activated, a brief burst of energy, less that
1/10 of a second, is transmitted and the vehicles’s
speed is quickly acquired. A detector without POP™
Mode detection capability cannot respond to this
brief transmission. This detector has the power to
report this new gun where other detectors cannot!
If you are the targeted vehicle, a laser gun can often
determine your speed within a few seconds after you
receive an alert. In this situation there is generally no
time to safely adjust your speed. However, if you are
traveling near or behind the targeted vehicle and
receive an alert, response time should be sufficient.
Any laser alert, regardless of duration, requires
immediate action!
When returning a unit for service under warranty,
please follow these instructions:
Other Speed Detection Systems
Laser Facts
1. Ship the unit in the original carton or in a suitable
sturdy equivalent, fully insured, with return
receipt requested to:
Several techniques other than radar or laser are used
to measure vehicle speeds. When these methods
are being used, no detector can provide a warning.
These techniques include:
It’s well documented that many radar guns cannot
reliably provide the speed of a targeted vehicle that
is traveling in a group of vehicles. In contrast, a laser
gun can target a specific vehicle out of a line of traffic
and determine its speed. The advantage of laser
over radar in terms of target identification is the result
of the laser gun’s narrow beam. A radar transmission
can cover more than a four-lane highway at a distance
of 1,000 feet, compared with a laser transmission
which covers about 3 feet at the same distance. For
best protection, keep these points in mind:
Whistler Repair Dept.
1201 North Dixieland Rd
Rogers, AR. 72756
• Pacing - A patrol car drives behind you and matches
your driving speed.
• Vascar/Aircraft - The time it takes a vehicle to travel
a known distance is measured.
Please allow 3 weeks turnaround time.
IMPORTANT: Whistler will not assume responsibility
for loss or damage incurred in shipping. Therefore,
please ship your unit insured with return receipt
requested. CODs will not be accepted!
Download from Www.Somanuals.com. All Manuals Search And Download.
23
21
22
WARRANTY INFORMATION
WARRANTY INFORMATION
ACCESSORIES
2. Include with your unit the following information,
clearly printed:
In the event repairs cannot be covered by the minimum
$55.00 service fee, you will be contacted by a Whistler
technical service specialist who will outline options
available to you. If you elect not to have your unit
repaired, it will be returned to you along with your
certified check or money order.
These and other accessories can be ordered directly
from Whistler by calling 1-800-531-0004 or visit our
online store at www.whistlergroup.com
• Your name and street address (for shipping via
UPS), a daytime telephone number and email
address, if applicable.
• A detailed description of the problem (e.g., “Unit
performs self-test but does not respond to radar”).
• A copy of your dated store receipt or bill of sale.
Order
Code
Description
Price
IMPORTANT: When returning your unit for service,
be certain to include a daytime telephone number,
and email address (if applicable).
202151
206552
206553
206880
Windshield Bracket Kit
Straight Power Cord (5’)
Coiled Power Cord (7’)
$
9.95
3. Be certain your unit is returned with its serial number.
For reference, please write your units serial number
in the following space: s/n_______________.
$ 14.95
$ 15.95
$
Customer Service
If you have questions concerning the operation of your
Whistler detector, or require service during or after
the warranty period, please call Customer Service at:
1-800-531-0004
Hardwire Kit (10' )
9.95
Units without serial numbers are not covered under warranty.
(for wiring to fuse box)
IMPORTANT: To validate that your unit is within
the warranty period, make sure you keep a copy
of your dated store receipt. You may register
however, for warranty verification purposes, a
copy of your dated store receipt must accompany
any unit sent in for warranty work.
206666
Modular Cord Package
(includes coiled and straight cords,
and power adapter)
$ 17.95
Representatives are available to answer your questions
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or
visit the FAQ’s at www.whistlergroup.com
159032
402081
206660
Package of 8 Suction Cups
Non-Skid Dash Pad
Straight Modular Cord and
Socket Multiplier
Coiled Modular Cord and
Socket Multiplier
$
$
2.95
6.95
SPECIFICATIONS
$ 11.95
$ 12.95
Service Out of Warranty
Units will be repaired at “out of warranty” service
rates when:
206661
1783 Dimensions:
4.65” L x 2.95” W x 1.45” H Weight: 6.8 oz.
1793 SE Dimensions: 4.65” L x 2.95” W x 1.45” H Weight: 6.8 oz.
• The units original warranty has expired.
• Dated store receipt is not supplied.
• The unit has been returned without its serial number.
• The unit has been abused, modified, installed
improperly, or had its housing removed.
Laser Wavelength:
Radar Frequencies:
905 50 nanometers (nm)
*Modular: Interconnecting pieces cord and plug. Shipping and
handling (per order) $5.00 Prices are subject to change without notice.
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
Operating Temperature Range: -20˚ C to +80˚ C (-4˚ F to +176˚ F)
Power Requirements:
Operational 12 to 15 volts DC, 250mA nominal
Vehicle Battery Saver, 30mA nominal.
The minimum out of warranty service fee for your
Whistler detector is $55.00 (U.S.). If you require out
of warranty service, please return your unit as outlined
in the section “Service Under Warranty” along with a
certified check or money order for $55.00. Payment
may also be made by MasterCard, VISA or American
Express; personal checks are not accepted.
One or more U.S. patents may apply:
#5,146,227, #5,379,456, #5,666,120, #5,990,821
POP™ Mode is a trademark of MPH Industries, Inc.
Specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
25
26
|