USER’S MANUAL
MANUEL DE L’UTILISATEUR
MANUAL DEL USUARIO
VM-42F140S
VM-47F140S
1080p Monitor
Moniteur 1080p
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. IMPORTANT SAFETY AND PRECAUTIONS
This wide active matrix TFT (thin film transistor) liquid crystal monitor is designed for use as
a stand alone MONITOR as well as a display device for video electronics appliances and
personal computers.
1.1. Important Information
Warning : To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
CAUTION
Risk of electric
shock. Do not open.
The symbol is intended to alert the user to presence of un-insulated ”Hazardous Voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The symbol is intended to alert the user that improper use of the product may result in
product malfunction. The user should pay attention to avoid accidents or unnecessary
problems.
Caution : To reduce the risk of electric shock, do not attempt to disassemble or modify this
device. There are no user-serviceable parts inside. Refer any service issues to
qualified service personnel.
Caution : FCC/ CSA regulations state that any unauthorized changes or modifications to this
equipment may void the user's authority to operate it.
Important: One Federal Court has held that unauthorized recording of copyrighted MONITOR
programs is an infringement of U.S. copyright laws. Certain Canadian programs may also be
copyrighted and any unauthorized recording in whole or in part may be in violation of these
rights.
Warning : Do not leave stationary images, patterns, PIP windows, or letterbox images on
the screen for prolonged periods of time as this may result in permanent damage to the
LCD panel. This type of damage is not covered under warranty. The following are
examples of, but not limited to, potentially hazardous display output: side bar images,
video game patterns, closed captioning, channel logos and letterbox black bars. To
prevent this type of damage, it is recommended to display constantly moving images that
fill the screen as often as possible.
According to industrial standards for LCD display technology; there are a certain number of
allowable defective pixels. Although we produce panels with more than 99.9% active cells,
there still may be some cells that do not produce light or remain constantly lit. For further
information, please contact sales or technical support.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. GENERAL INFORMATION
2.1 Overview
A. Front View of the HD Video Monitor
IR receiver &
Left Channel
Right Channel
Speaker
LED indicator
Speaker
4
Download from Www.Somanuals.com. All Manuals Search And Download.
B. Rear View of the HD Video Monitor
5
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Side View of the HD Video Monitor
Right Side
Function Buttons
Use the function buttons on the right side of the HD Monitor or on the remote control to
display the On Screen Display (OSD).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Feature
z
Highest Resolution
It’s the highest resolution 42”/47" 1080p monitor on the market. The Westinghouse
VM-42/47F140S features a 1920 x 1080 resolution display with more than 2 million pixels.
z
True 1080p
The Westinghouse VM-42/47F140S 1080p monitor is a true 1080p monitor. It can accept,
process and output any 1080p source input.
z
Multi-Source Input
HDMI x 3,
Support Format: 640 x 480 @ 60Hz, 720 x 400 @ 70Hz,
800 x 600 @ 60Hz, 800 x 600 @ 72Hz,
800 x 600 @ 75Hz, 1024 x 768 @ 60Hz,
1024 x 768 @ 70Hz, 1024 x 768 @ 75Hz
1280 x720 @ 60Hz, 1280 x 800 @ 60Hz,
1280 x 1024 @ 60Hz, 1280 x 1024 @ 75Hz,
1920 x 1080 @ 60Hz,
480i/p, 720p, 1080i/p
YPbPr x 2,
Support Format: 480i/p, 720p, 1080i/p
Composite x 1, Support Format: 480i
S-Video x 1,
D-SUB x 1,
Support Format: 480i
Support Format: 640 x 480 @ 60Hz, 640 x 480 @ 72Hz
640 x 480 @ 75Hz, 720 x 400 @ 70Hz,
800 x 600 @ 60Hz, 800 x 600 @ 72Hz
800 x 600 @ 75Hz, 1024 x 768 @ 60Hz,
1024 x 768 @ 70Hz, 1024 x 768 @ 75Hz
1280 x720 @ 60Hz, 1280 x 1024 @ 60Hz,
1280 x 1024 @ 75Hz ,1280 x 800 @ 60Hz,
1920 x 1080 @ 60Hz
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DVI x 1,
Support Format: 640 x 480 @ 60Hz, 720 x 400 @ 70Hz,
800 x 600 @ 60Hz, 800 x 600 @ 72Hz,
800 x 600 @ 75Hz, 1024 x 768 @ 60Hz,
1024 x 768 @ 70Hz, 1024 x 768 @ 75Hz
1280 x720 @ 60Hz, 1280 x 800 @ 60Hz,
1280 x 1024 @ 60Hz, 1280 x 1024 @ 75Hz,
1920 x 1080 @ 60Hz,
480i/p, 720p, 1080i/p
z
HD Cable, HD Satellite and HD Gaming
Because the VM-42/47F140S is a true 1080p monitor, you can attach all your favorite
sources using uncompressed digital interfaces. Multiple high-bandwidth digital interfaces
mean high-performance HD digital cable, HD satellite and an HD game console.
z
Design Excellence
The Westinghouse VM-42/47F140S 1080p monitor is the largest screen you can fit in a
limited space. Because of its ingenious and efficient design, you can fit this 47" display in
the same space that other brands can only squeeze in a 40" or 42". Amazingly thin for its
size, it’s only 5.0 inches deep (without base), giving you the option of mounting this stylish
monitor on your wall. It’s true art, Westinghouse-style. Connector access is a breeze with
our innovative Spine Design™ technology, allowing easy side access to all connections
(not just 1 legacy input) while still on the wall or shelf.
z
Great Sound Right Out of the Box
The Westinghouse VM-42/47F140S is a complete entertainment package. A pair of 15 watt
speakers that give you an amazing sound experience by themselves, or you can use them
to optimize the center field of your existing surround sound system. Convenient switched
stereo audio outputs allow the ultimate flexibility for external receivers and surround-sound
processors.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3 Controls and Ports of the Panel
A. Front Panel Views
Function Keys
Remote sensor window & Power indicator
FUNCTION KEYS
1. MENU: Displays the main menu. When OSD is appeared, press the button to select or
access the sub-menu.
2. VOLUME (+ / -): Increases/decreases the volume or use as the left/right arrow button for
menu.
3. CHANNEL (+ / -): Changes the Source or use as the up/down arrow button for menu.
4. SOURCE: Selects the input source (Video, S-Video, YPbPr1, YPbPr2, PC, DVI, HDMI1,
HDMI2, HDMI3)
5. POWER: Turns the LCD-MONITOR on or off.
6. REMOTE SENSOR WINDOW: Aim the remote control towards this spot on the
MONITOR.
7. POWER INDICATOR : WHITE LIGHT
ORANGE LIGHT ─ Power Sleep
OFF LIGHT ─ Power Off
─ Power On
NOTE 1: These buttons control the basic features of your MONITOR, including the on-screen menu. To use
advanced features, you must use the remote control.
NOTE 2: The picture of LCD MONITOR display is for reference only.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
B. Side Panel Views
1
1. DVI Input
Using a DVI cable, connect to a computer, HD
Digital cable/satellite receiver, HD Set-Top-Box,
DVD or other device with a DVI output.
2
3
2. DVI AUDIO Input (Left / Right)
Connect an external DVI audio source to this jack.
3. HDMI1 Video Input
Connect to an external video device such as HD
Digital cable/satellite receiver, HD Set-Top-Box,
Media Center PC, or DVD player
4
4. HDMI2 Video Input
Connect to an external video device such as HD
Digital cable/satellite receiver, HD Set-Top-Box,
Media Center PC, or DVD player
5
6
5. HDMI3 Video Input
Connect to an external video device such as HD
Digital cable/satellite receiver, HD Set-Top-Box,
Media Center PC, or DVD player
6. HDMI3 AUDIO Input (Left / Right)
Connect the audio input if you using a DVI-to-HDMI
converter
7
7. RS232
Connect to PC RS232 port for function control
10
Download from Www.Somanuals.com. All Manuals Search And Download.
8. VGA Input
Using a 15-pin VGA cable, connect to a computer.
8
9
9. VGA Audio Input (Stereo)
Connect to the audio out from a computer.
10. YPbPr1 / YPbPr2 Video Input
Connect an external video device such as DVD or
video game system with component output to these
jacks
10
11. Audio Input (Left / Right)
Connect an external audio source for component
input
11
12. S-Video / Composite Video Input
13. Audio Input (Left / Right)
12
13
Connect an external audio source for S-Video /
Composite input
14. SPDIF Output (Optical)
Connect this output to an external stereo audio
amplifier, receiver or surround sound processor with
SPDIF optical input.
14
15
15. AUDIO Out
Connect this output to an external stereo audio
amplifier, receiver or surround sound processor.
16. AC Power In
Connect power cable to AC inlet.
16
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 Accessories
VM-47F140S
User’s Manual
Remote Control & Batteries
Quick connect
Power Cord
Quick Connect Guide
Warranty Card
Warranty Card
Screw driver & Screws x4(base)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5 Remote Control
1
2
3
4
5
6
Power
Switch MONITOR power On/Off.
1
Mute
2
3
4
6
7
Turn the sound On/Off.
Swap
5
8
Not supported.
PIP
Not supported.
Backlight
Adjust the LCD backlight level.
Sleep
9
Press to select a preset time interval for
automatic power down.
7
8
C.C.
10
11
Not supported.
Favorite
29
12
Not supported.
Channel number keys
Select specific input source.
Enter
13
9
14
16
10
Execute a command.
Input
15
11
12
13
14
15
16
17
18
Select input source.
VOL +/-
Volume Up/Down adjustment.
CH +/-
20
19
Input source select.
Screen Fit
22
24
26
28
21
23
Adjust scaling
Menu
25
27
Display the user setup menu.
Return
Switch to root OSD menu
Enter
17
18
Execute a command.
▲/▼/◄/►
OSD menu control(▲/▼:OSD Menu Up/Down
Select;◄/►:Volume/Setting Up/Down)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
19
20
21
22
23
24
25
26
Guide
Not supported.
1
Info
2
5
8
3
4
6
7
Display the source information.
YPbPr1
Select YPbPr1 source input.
MONITOR
Not supported.
PC
Select VGA source input.
HDMI
9
Select HDMI 1, 2 or 3 source input.
YPbPr2
Select YPbPr2 source input.
10
11
29
12
DVI
Select DVI source input.
27
28
Video
13
Select Video input.
S-Video
14
16
Select S-Video input.
15
29
Dot button
17
18
Not supported.
20
19
22
24
26
28
21
23
25
27
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3. INSTALLATION AND FUNCTION ADJUSTMENT
3.1 Installation
z Insert Batteries into Remote Control
1) Remove the battery cover.
2) Insert two size AAA batteries corresponding to (+) and (-) marks on the battery
compartment.
CAUTION
‧
‧
Only use AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage, which may
pose a fire risk or lead to personal injury.
‧
Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may
result in cracking or leakage, which may pose a fire risk or lead to personal injury.
‧
‧
‧
Dispose of used batteries in accordance with local laws and regulations.
Keep batteries away from children and pets.
When the remote control will not be used for an extended period, remove the batteries
15
Download from Www.Somanuals.com. All Manuals Search And Download.
z Connect power cables
Connect the power cord to the LCD MONITOR then to a proper AC outlet.
IMPORTANT: The power input voltage for MONITOR is 100 ~ 240Vac, before
beginning; make sure all devices are turned off.
z Turn Power On
Press the power button on the right side of the LCD MONITOR, or press the power
(Red) button on the remote control.
z Select input source for the LCD MONITOR using the OSD menu or
remote control direct select buttons
z If connecting to a PC(VGA):
For the best picture quality, set the timing of your computer to 1920 x 1080 at 60Hz.
Refer to the graphic card’s user guide of your computer to set this timing.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 How to assemble the BASE
a. Carefully place the TV face down on a soft clean surface.
b. Position the BASE at bottom the TV.
c. Install the four screws underneath the BASE.
(See picture below)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 How to remove the BASE
a. Carefully place the MONITOR face down on a soft clean surface.
b. Remove the four screws underneath the BASE.
(See picture below)
c. Pull out the BASE from the MONITOR.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Function Adjustment
There are four main Setup Menus; these are Picture, PC, Audio and Setting. All the
functions can be adjusted either by the remote control or by using the control keys on the
right side of the monitor.
Viewing OSD Menu
To display the main menu, press the Menu button on the right side of front control keys of
the LCD MONITOR or the MENU key on the remote control. Press arrow keys to select
desired OSD menu and Enter key to select desired setting.
Menu/Exit
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE
1. PICTURE MODE
< ENHANCE / MOVIE / SPORT / GAME / USER >
Press arrow key to adjust your favorite picture mode setting.
2. BRIGHTNESS (For Picture Mode set to USER Only)
< 0 ~ 100 > Press arrow key to adjust brightness setting.
3. CONTRAST (For Picture Mode set to USER Only)
< 0 ~ 100 > Press arrow key to adjust contrast setting.
4. SATURATION (For Picture Mode set to USER Only)
< 0 ~ 100 > Press arrow key to adjust saturation setting.
5. HUE (For Picture Mode set to USER Only)
< 0 ~ 100 > Press arrow key to adjust hue setting.
6. COLOR TEMP (For Picture Mode set to USER Only)
< WARM / NEUTRAL / COOL / USER >
Press arrow key to adjust color temperature setting.
7. SHARPNESS (For Picture Mode set to USER Only)
< 0 ~ 100 > Press arrow key to adjust sharpness setting.
8. BACKLIGHT (For Picture Mode set to USER Only)
< 0 ~ 100 > Press arrow key to adjust your favorite picture mode setting.
9. ADVANCE SET
1. DLC
< OFF / ON >
2. FILM MODE
3. 3D NR
< NORMAL / QUICK >
< OFF / LOW / MIDDLE / HIGH >
< 0 ~ 100 >
4. FLESH TONE
5. ASPECT RATIO
<FILL / STANDARD / OVERSCAN>
Press arrow key to adjust your favorite advance setting.
RESET
0.
Press Enter key to recover the default picture setting.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
PC
1. AUTO (For PC Analog input only)
Press Enter key to do PC auto-adjust function.
2. CLOCK (For PC Analog input only)
< 0 ~ 100 > Press arrow key to adjust PC clock setting.
3. PHASE (For PC Analog input only)
< 0 ~ 100 > Press arrow key to adjust PC phase setting.
4. H-POSITION (For PC Analog input only)
< 0 ~ 100 > Press arrow key to adjust PC Horizontal Position setting.
5. V-POSITION (For PC Analog input only)
< 0 ~ 100 > Press arrow key to adjust PC Vertical Position setting.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO
1. VOLUME
< 0 ~ 100 > Press arrow key to adjust volume setting.
2. EQUALIZER
< STANDARD / MOVIE / MUSIC / USER >
Press arrow key to adjust your favorite equalizer mode setting.
3. BASS (For EQUALIZER set to USER Only)
< 0 ~ 100 > (For equalizer is selected as “user” mode only)
Press arrow key to adjust your favorite bass setting.
4. TREBLE (For EQUALIZER set to USER Only)
< 0 ~ 100 > (For equalizer is selected as “user” mode only)
Press arrow key to adjust your favorite treble setting.
5. BALANCE
< 0 ~ 100 > Press arrow key to adjust balance setting.
6. MUTE
< OFF / ON >
Press arrow key to adjust your audio mute function setting.
7. SPEAKER
< INTERNAL / EXTERNAL>
Press arrow key to adjust your favorite balance setting.
INTERNAL: For internal speaker
External: For Line out & S/PDIF out
8. RESET
Press Enter key to recover the default audio setting.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS
1. MENU POSITION
z MENU H-POSITION
z MENU V-POSITION
Press arrow key to adjust menu position.
2. MENU TIMEOUT
< OFF / 15S / 30S / 45S / 60S >
Press arrow key to adjust OSD MENU timeout function setting.
3. LANGUAGE
< ENGLISH / 繁體中文 / SPANISH / FRENCH >
Press arrow key to adjust OSD MENU timeout function setting.
4. SLEEP TIMER
< OFF / 15MIN / 30MIN / 45MIN / 60MIN >
Press arrow key to adjust your favorite equalizer mode setting.
5. TRANSPARENCY
< 0 ~ 100 > Press arrow key to adjust transparency function setting.
6. POWER SETTING
1. DPMS < OFF / 5S / 10S / 20S >
2. POWER MODE <E. SAVING / NORMAL>
Press arrow key to adjust DPMS function setting.
7. ADD. FEATURES
1. LED
< ON / OFF >
< ON / OFF >
2. KEY LOCK
When KEY LOCK ON, press MENU key in the front panel for about 7 sec to unlock
or use Remote Control to set the KEY LOCK OFF.
3. VOLUME MAX
< 0 ~ 100 >
4. VOLUME MIN
< 0 ~ 100 >
5. START VOLUME SET
6. START INPUT SET
< OFF / VOLUME MIN ~ VOLUME MAX >
< OFF / VGA / DVI / AV / SV / YPBPR1 / YPBPR2 /
HDMI1 / HDMI2 / HDMI3 >
23
Download from Www.Somanuals.com. All Manuals Search And Download.
7. REMOTE LOCK
When REMOTE LOCK ON, press “ i ” key for about 7 sec to unlock.
8. SETUP MENU LOCK < ON / OFF >
< ON / OFF >
When REMOTE LOCK ON, press “ i ” key for about 7 sec to unlock.
“ i ”
9. SET ID
< 0 ~ 99 >
Press arrow key to adjust additional feature function setting.
8. AUTO SOURCE < ON / OFF >
Press arrow key to adjust auto source function setting.
9. SYSTEM INFO
Press Enter or arrow key to display the system information.
10. FACTORY RESET
Press Enter key to recover the default factory setting.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
4. TROUBLESHOOTING
There is no picture or sound.
▪ Make sure the AC adapter is connected.
▪ Verify that there is a valid source signal.
▪ Make sure the correct input mode is selected.
There is no picture from AV.
▪ Make sure the BRIGHTNESS is properly adjusted.
▪ The florescent lamp may have reached the end of its
life. Contact an authorized service center.
▪ Make sure the video source is plugged into the
composite video-in port.
There is no sound.
▪ Make sure the volume is not set to minimum.
▪ Make sure the sound is not muted
There is no picture or sound, just noise.
▪ The source signal may be weak.
▪ Your provider may be experiencing difficulties.
▪ Check your input connections.
Picture is not clear.
▪ The source signal may be weak.
▪ The provider may be experiencing difficulties.
▪ Check input connections.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture is light or improperly tinted.
▪ Check the Hue, Saturation and Color adjustments.
▪ Reset the MONITOR to the factory default settings.
The picture is too dark.
▪ Select a different Video Preset mode.
▪ Check the Brightness of Picture Settings.
▪ The fluorescent lamp may have reached the end of its life.
Contact an authorized service center.
Remote control does not work.
▪ Install new batteries.
▪ Make sure the remote sensor window isn’t blocked.
▪ Make sure the system is in the right mode (MONITOR /
VCR / CBL / AUX)
There are stripes on the screen or colors fade.
▪ There may be interference from other appliances.
▪ There may be interference between the video source
cable and the power cable.
▪ Make sure the power and video cables are not touching.
Check the Hue, Saturation and Color adjustments
26
Download from Www.Somanuals.com. All Manuals Search And Download.
The picture is not sharp.
▪ The signal source may be weak.
▪ The provider may be experiencing difficulties.
▪ Check input connections.
▪ Check the Sharpness of Picture Settings.
The picture moves.
▪ The source signal may be weak.
▪ The provider may be experiencing difficulties.
▪ Check input connections.
The picture is doubled or tripled.
▪ The source signal may be weak.
▪ Check input connections.
The picture is spotted.
▪ There may be interference from other appliances
nearby or around the LCD Monitor.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
5. PRODUCT SPECIFICATION
ITEMS
VM-42F140S
Screen Size
42” LCD Panel
Aspect Ratio
16：9
Panel
Resolution
1920 x 1080
16.7 Million True Colors
176o Hor./ 176o Ver. (typ.)
CVBS
Display colors
Viewing Angle (CR>10)
Composite Signal
Y, C Signal
x 1
x 1
x 2
x 3
S-Video
Video Input
PC Input
Component Signal
HDMI Connection
Y Pb Pr
HDMI
VGA Connection
DVI Connection
Audio 1
D-Sub 15 pin
DVI
x 1
x 1
Composite / S-Video Audio L/R Input
YPbPr Audio L/R Input
PC Audio Input
x 1
x 2
x 1
x 1
x 1
Audio 2
Audio Input
Audio 3
Audio 4
DVI Audio L/R Input
Audio 5
HDMI Audio L/R Input
15W + 15W (Average)
AUDIO Left / Right Output
SPDIF Output
Speaker ( build-in)
RCA Out
Audio Output
Feature
Digital Audio Out
Function Keys
Power , Input , Menu , Up/Down(Channel) , +/-(Volume)
3D Comb-filter , 3D De-interlace , Aspect Ratio Control (ARC) ,
Auto Picture Control, Noise Reduction
Video Performance
Other Control
Sleep Timer, Timer On, Timer Off
AC 100V ~ 240V , 50 / 60Hz
< 300 W
Power Supply
Power
Power Consumption
For use only with UL Listed Wall Mount Bracket or M2010 Wall Mount Bracket.
Wall Mount
Dimension
Weight (net)
W x H x D
41.5” x 28.2” x 8.9”
57.2 lb
Without Accessories
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ITEMS
VM-47F140S
Screen Size
47” LCD Panel
Aspect Ratio
16：9
Panel
Resolution
1920 x 1080
16.7 Million True Colors
176o Hor./ 176o Ver. (typ.)
CVBS
Display colors
Viewing Angle (CR>10)
Composite Signal
Y, C Signal
x 1
x 1
x 2
x 3
S-Video
Video Input
PC Input
Component Signal
HDMI Connection
Y Pb Pr
HDMI
VGA Connection
DVI Connection
Audio 1
D-Sub 15 pin
DVI
x 1
x 1
Composite / S-Video Audio L/R Input
YPbPr Audio L/R Input
PC Audio Input
x 1
x 2
x 1
x 1
x 1
Audio 2
Audio Input
Audio 3
Audio 4
DVI Audio L/R Input
Audio 5
HDMI Audio L/R Input
15W + 15W (Average)
AUDIO Left / Right Output
SPDIF Output
Speaker ( build-in)
RCA Out
Audio Output
Feature
Digital Audio Out
Function Keys
Power , Input , Menu , Up/Down(Channel) , +/-(Volume)
3D Comb-filter , 3D De-interlace , Aspect Ratio Control (ARC) ,
Auto Picture Control, Noise Reduction
Video Performance
Other Control
Sleep Timer, Timer On, Timer Off
AC 100V ~ 240V , 50 / 60Hz
< 300 W
Power Supply
Power
Power Consumption
For use only with UL Listed Wall Mount Bracket or M2010 Wall Mount Bracket.
Wall Mount
Dimension
Weight (net)
W x H x D
46.1” x 31.7” x 8.9” (with stand)
69.1lb
Without Accessories
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Westinghouse Digital Electronics
Santa Fe Springs, CA
SE-UM-4208-0701
Download from Www.Somanuals.com. All Manuals Search And Download.
|