Wells-Gardner Electronics Corporation
User Manual for
D9400 D9410 Series
Digital-Control Color Monitor
Wells-Gardner Electronics
9500 W. 55th Street Suite A
Mc Cook, Il. 60525-3605
(708) 290-2100
Revision ORG/E11004
D9400 User manual
Date 2-10-06
Drawn By:
Checked / Date
Approved / Date
Lee Sutton
2/10/06
Lee Sutton
2/10/06
Lee Sutton
2/10/06
Download from Www.Somanuals.com. All Manuals Search And Download.
Wells-Gardner Electronics Corporation
FEATURES:
I²C BUS control.
The monitor is designed with I²C BUS control for simplifying the circuitry.
Automatic mode recognition of preset factory modes
No control pots to wear out
SET UP:
Setting up your monitor is easy. All you have to do is make a few simple connections
and adjustments. The procedure is as follows:
START UP:
Your monitor starts up automatically when you insert the power plug to power source.
Signal Cable Connection.
Connect the 15pin-signal cable to the source and lock both screws to ensure that the
monitor is properly grounded.
D type 15pin connector:
PIN NO.
DESCRIPTION
VIDEO RED
VIDEO GREEN
VIDEO BLUE
PIN NO.
DESCRIPTION
N.C.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
GROUND
N.C.
N.C.
N.C.
SDA
HOR-SYNC
VER-SYNC
SCL
VIDEO RED GROUND
VIDEO GREEN GROUND
VIDEO BLUE GROUND
Download from Www.Somanuals.com. All Manuals Search And Download.
Wells-Gardner Electronics Corporation
CONTROLS AND ADJUSTMENTS:
There are fiver switches on the control panel. The adjustable controls allow
the best display status for individual requirements.
1.0
Key Function.
1. OSD / EXIT
OSD – Call the Main-Menu OSD
2. FUN – / FUN +
When the Main-Menu is displayed, you can select each function using these keys
3. KEY - / KEY +
When the Sub-Menu is displayed, you can change the amplitude of
The selected function of the screen using these keys.
OSD
FUN -
FUN +
KEY -
KEY +
USER O.S.D. CONTROL
Location
Adjustment Method
OSD CONTROL
Function
Brightness
Contrast
Horizontal Position
Vertical Position
Horizontal Size
Vertical Size
Side Pincushion
Trapezoid
CUSTOMER
CONTROL
PCB
Pin Balance
Parallelogram
OSD Time
Degauss
RGB screen Color
H Size -H-Cen, Fil, B+ Adj - Focus
and Screen
VR control : VR501, VR601
VR202,VR201 FBT
Main PCB
Factory Adjusted
* Note : ( Factory adjusted and epoxyed VR501 VR601)
OSD User Controls
( Hot melted screen FBT)
Download from Www.Somanuals.com. All Manuals Search And Download.
Wells-Gardner Electronics Corporation
A. ADJUSTMENT PROCEDURE .
BRIGHTNESS ADJUSTMENT
1) Press the “OSD” key The Main-Menu OSD will come up as pictured above.
2) Search “BRIGHTNESS” sub-menu using “+ or - FUN” key on the Main-Menu OSD.
3) The “BRIGHTNESS” OSD color changes from blue to red.
4) Adjust Brightness as much as you want using “+ or -” key.
5) After finishing the Brightness adjust, press the “OSD ” key. The “OSD” will
Disappear. The new Brightness value will be saved automatically.
6) If you want to adjust other functions (sub-menu), search the function using “+ or -” keys,
and then repeat the same procedures of steps 2-5. See next page.
7) Press the “OSD” key again to finish adjustments and the OSD will disappear.
If no action is taken in the OSD, the menu will disappear by itself.
Download from Www.Somanuals.com. All Manuals Search And Download.
Wells-Gardner Electronics Corporation
OTHER “OSD” ADJUSTMENTS
OSD
FUN-
FUN +
KEY -
KEY +
OSD MENU AND USER FUNCTIONS.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CONTRAST - PICTURE CONTROL
H. POSITION - SCREEN POSITION
V. POSITION - SCREEN POSITION
H. SIZE - SCREEN SIZE
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
OPTIONAL
SAME ABOVE
SAME ABOVE
SAME ABOVE
SAME ABOVE
SAME ABOVE
SAME ABOVE
SAME ABOVE
SAME ABOVE
SAME ABOVE
SAME ABOVE
FUNCTION
V. SIZE - SCREEN SIZE
PINCUSHION - SCREEN GEOMETRY
TRAPEZOID - SCREEN GEOMETRY
PIN BALANCE (BOW)- SCREEN GEOMETRY
PARALLEL - SCREEN GEOMETRY
TILT - SCREEN ROTATION
HORIZONTAL MOIRE
VERTICAL MOIRE
OPTIONAL
FUNCTION
OSD - HORIZONTAL POSITION
OSD - VERTICAL POSITION
OSD - TIME
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
SAME ABOVE
SAME ABOVE
SAME ABOVE
SAME ABOVE
SEE NEXT PAGE
SEE NEXT PAGE
DEGAUSS - SCREEN COLOR PURITY
COLOR SCREEN - COLOR PREFERENCE
LANGUAGE - OSD LANGUAGE
The menu is available in NINE POPULAR languages
•
RECALL - RECALL FACTORY ADJUSTMENTS
ADJUSTMENT
SEE ABOVE
When the “RECALL” key is pressed, all user’s adjustment values are changed to the
factory values.
Download from Www.Somanuals.com. All Manuals Search And Download.
Wells-Gardner Electronics Corporation
COLOR SUBMENU RGB
SCREEN COLOR - COLOR PREFERENCE
• COLOR ADJUSTMENT. Factory preset.
COLOR 1 - 9300°K: X=0.285, Y=0.293
COLOR 2 - 6500°K: X=0.312, Y=0.329
COLOR ADJUSTMENT - USER PREFERENCE
1) Press the “OSD” button to show the Main-Menu OSD.
2) Search the “RGB - ICON” sub-menu by using “+ or - Key” key on the Main-Menu OSD.
3) SELECT the “RGB” by pressing “+ Key”. The color Sub-Menu OSD appears as
Shown by the figure below. RGB BOX WILL BE FLASHING RED.
4) Press “+ or- KEY” to select COLOR 1 ( Cool color ) or COLOR 2 ( Warm color)
Press “+ or - FUN” to select “RED”, “GREEN” or “BLUE” for adjustment to the
User’s preference. The “ + or- KEYS ” will adjust the selected RED,GREEN,BLUE
Color on the viewing screen. The selected item will change the OSD color and the
White Screen from white to the users preference.
5) The box labeled R Will return the changed settings to the factory preset
values if desired
6) Using the “+ or- KEY” to select the “ OSD ” box will return the main menu.
Using the “+ or- KEY” to select the “ EXIT ” box will turn off the menu.
( Exit and save. Save is automatic)
Download from Www.Somanuals.com. All Manuals Search And Download.
Wells-Gardner Electronics Corporation
LANGUAGE - USER PREFERENCE
LANGUAGE SELECTION - USER PREFERENCE
1) Press the “OSD” button to show the Main-Menu OSD.
2) SELECT the “LANGUAGE - ICON” by pressing “+ FUN” Key. The language
Sub-Menu OSD appears as Shown by the figure above. The language
BOX WILL BE FLASHING RED.
3) Press “+ or - KEY” to select one of the desired languages for the users
Preference. This menu is available in nine languages.
4) Press the “OSD” button to turn off the Menu (OSD).
If no action is taken in the OSD, the menu will disappear by itself.
( Exit and save. Save is automatic)
Download from Www.Somanuals.com. All Manuals Search And Download.
Wells-Gardner Electronics Corporation
TIMING CHART:
5 Standard Factory Pre-Set Timing Modes.
Can be set to any customer requirement of 15.75-40Khz hor and 40-100Hz vert.
Timing shown is based on 801GC/GX signal generator
CGA
640X240
MID- RES
773X384
Mode 3
640X480
VGA_M3 VGA_2
Mode4
720X400
Mode 5
800X600
VG900602
HORIZONTAL
Scan freq.
scan per.
15.725kH
24.394kHz
41.00us
3.00us
2.910us
30.690us
4.440us
( - )
31.469kHz 31.469Khz
37.879KHz
26.00us
3.200us
1.000us
20.000us
2.200us
( + )
63.594us
4.688us
2.187us
50.00us
6.719us
( - )
31.777us
3.813us
0.636us
25.422us
1.906us
( - )
31.777us
3.813us
0.636us
25.422us
1.906us
sync pulse
front porch
active vid.
back porch
sync polarity
( -
)
VERTICAL
Vert. scan freq.
scan per.
sync pulse
front porch
active vid.
60.018Hz
16.662ms
0.191ms
0.190ms
15.263ms
1.018ms
( - )
57.534Hz
17.384m
0.164ms
0.451ms
15.621ms
1.148ms
59.941Hz
16.683ms
0.064ms
0.318ms
15.253ms
1.048ms
( - )
70.087Hz
14.268ms
0.064ms
0.318ms
12.711ms
1.048ms
60.317Hz
16.579ms
0.106ms
0.02ms
15.840ms
0.607ms
( + )
back porch
sync polarity
( -
)
(
+ )
Lee
Download from Www.Somanuals.com. All Manuals Search And Download.
Wells-Gardner Electronics Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Wells-Gardner Electronics Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|