Model No. WEBE03320
Serial No.
Write the serial number in the
space above for future reference.
USER’S MANUAL
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satis-
faction through direct assis-
tance from our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The trained technicians on our
customer hot line will provide
immediate assistance, free of
charge.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the slant board.
1. Read all instructions in this manual before
using the slant board. Use the slant board
only as described in this manual.
7. Keep children under 12 and pets away from
the slant board at all times.
8. Always wear athletic shoes for foot protec-
tion while exercising.
2. It is the responsibility of the owner to ensure
that all users of the slant board are ade-
quately informed of all precautions.
9. The slant board is designed to support a
maximum user weight of 300 pounds. Do not
use more than 100 pounds of weight with the
weight bench. Note: The weight bench does
not include weights.
3. The slant board is intended for home use
only. Do not use the slant board in any com-
mercial, rental, or institutional setting.
4. Use the slant board only on a level surface.
Cover the floor beneath the slant board to
protect the floor.
10. Always make sure that the locking pin is fully
inserted into the pivot bracket and the frame
before exercising.
5. Make sure all parts are properly tightened
each time you use the slant board. Replace
any worn parts immediately.
11. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
6. Keep hands and feet away from moving parts.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile WEIDER®
BASICS slant board. The WEIDER® BASICS slant
board is designed to help develop the major muscle
toll-free at 1-800-999-3756, Monday through Friday,
6 a.m. until 6 p.m. Mountain Time (excluding holidays).
To help us assist you, please note the product model
groups of the upper body. Whether your goal is to tone number and serial number before calling. The model
your body, build dramatic muscle size and strength, or
improve your cardiovascular system, the WEIDER®
BASICS slant board will help you to achieve the spe-
cific results you want.
number is WEBE03320. The serial number can be
found on a decal attached to the slant board (see the
front cover of this manual).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
For your benefit, read this manual carefully before
using the slant board. If you have additional ques-
tions, please call our Customer Service Department
ASSEMBLED
DIMENSIONS:
Height: 41 in.
Width: 18 in.
Depth: 54 in.
Backrest
Seat
Front Leg
Foam Pad
Pivot Bracket
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 11 of this manual. Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M6 x 45mm Bolt (16)
M10 x 25mm Bolt (25)
M10 Washer (20)
M10 x 60mm Bolt (17)
M8 x 25mm Bolt (29)
M6 Washer (22)
M8 x 65mm Bolt (26)
M6 x 16mm Bolt (24)
M10 Nylon Locknut (19)
M4 x 16mm Screw (28)
M10 x 60mm Carriage Bolt (18)
M10 x 85mm Bolt (23)
M8 Nylon Locknut (27)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
Make Things Easier for Yourself
This manual is designed to ensure that the
slant board can be assembled successfully by
anyone. Most people find that by setting aside
plenty of time, assembly will go smoothly.
The following tools (not included) are required
for assembly:
• Two adjustable wrenches
• One rubber mallet
Before beginning assembly, carefully read the
following information and instructions:
• One standard screwdriver
• Assembly requires two people.
• One Phillips screwdriver
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• Lubricant, such as grease or petroleum jelly,
and soapy water.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
• As you assemble the slant board, make sure all
parts are oriented as shown in the drawings.
1.
1
Before assembling this product, make sure
that you understand the information in the
box above.
14
2
Name
Decal
Press a 45mm Square Inner Cap (14) into the top
of the Front Leg (2). Press two 50mm Round
Outer Caps (12) onto the ends of a Stabilizer (4).
19
12
Attach the Stabilizer (4) to the Front Leg (2) with
two M10 x 60mm Carriage Bolts (18) and two M10
Nylon Locknuts (19). Be sure the indents in the
Stabilizer and the decal on the Front Leg are in
the positions shown. Do not tighten the
Locknuts yet.
19
4
Indents
12
18
2. Press four 32mm Square Inner Caps (13) into the
tubes on the Frame (1).
2
13
Attach the Frame (1) to the Front Leg (2) with two
M10 x 60mm Bolts (17), two M10 Washers (20),
and two M10 Nylon Locknuts (19). Do not tighten
the Locknuts yet.
1
19
20
17
19
20
13
2
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press two 50mm Round Outer Caps (12) onto the
ends of the other Stabilizer (4).
3
Warning
Decal
Indents
12
Attach the Stabilizer (4) to the Rear Leg (3) with
two M10 x 60mm Carriage Bolts (18) and two M10
Nylon Locknuts (19). Be sure the indents and the
decal on the Stabilizer are oriented as shown.
Do not tighten the Locknuts yet.
19
18
12
3
1
20
20
4
19
Attach the Rear Leg (3) to the Frame (1) with two
M10 x 25mm Bolts (25) and two M10 Washers
(20).
25
4
Tighten the M10 Nylon Locknuts (19) used in
steps 1–3.
4. Press the 25mm x 50mm Inner Cap (15) into the
end of the Backrest Frame (5).
7
15
Attach the Pivot Bracket (6) to the Backrest
Frame (5) with two M8 x 65mm Bolts (26) and
two M8 Nylon Locknuts (27). Be sure the Pivot
Bracket is oriented as shown.
5
24
24
27
Attach the Backrest (7) to the Backrest Frame (5)
with four M6 x 16mm Bolts (24). Be sure the
Backrest is oriented as shown.
26
6
5. Slide the Pivot Bracket (6) through the slot in the
Frame (1).
5
Lubricate the M10 x 85mm Bolt (23). Attach the
Backrest Frame (5) to the Frame (1) with the Bolt
and an M10 Nylon Locknut (19). Do not over-
tighten the Locknut; the Backrest Frame must
be able to pivot easily.
5
19
6
1
21
Slot
Insert the Locking Pin (21) into the Frame (1) and
through an adjustment hole in the Pivot Bracket
(6).
23
Adjustment
Holes
Lubricate
6. Attach the tether on the Locking Pin (21) to the
bottom of the Frame (1) with the M4 x 16mm
Screw (28).
6
8
Wide
End
Attach the Seat (8) to the Frame (1) with four M6
x 45mm Bolts (16) and four M6 Washers (22). Be
sure the wide end of the Seat is on the side
shown.
1
21
22
28
16
16
7
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Attach an M8 x 25mm Bolt (29) to the the last
hole in the Pivot Bracket (6) with an M8 Nylon
Locknut (27).
7
9
Press four 19mm Round Inner Caps (11) into the
two Pad Tubes (10).
6
9
27
11
29
Slide the two Pad Tubes (10) into the Front Leg
(2). Slide four Foam Pads (9) onto the ends of the
Pad Tubes.
9
2
10
9
11
8. Make sure all parts are properly tightened
before you use the slant board.
ADJUSTMENTS
This section explains how to adjust the slant board. See the EXERCISE GUIDELINES on page 9 for important
information about how to get the most benefit from your exercise program. Also, refer to the accompanying exer-
cise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time you use the slant board. Replace any worn parts immediately.
The slant board can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ADJUSTING THE BACKREST
The Backrest (7) can be used in a declined, a level,
7
or any of three inclined positions. To adjust the
Backrest, remove the Locking Pin (21) from the
Frame (1). Move the Backrest to the desired position
and reinsert the Locking Pin into the Frame and an
adjustment hole in the Pivot Bracket (6).
WARNING:Always make sure the
Locking Pin (21) is fully inserted through the
Frame (1) and the Pivot Bracket (6).
1
21
6
Adjustment
Holes
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
Muscle Building
To increase the size and strength of your muscles,
Determining the exact length of time for each workout,
as well as the number of repetitions or sets completed,
push them close to their maximum capacity. Your mus- is an individual matter. It is important to avoid overdo-
cles will continually adapt and grow as you progres-
sively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
• by changing the amount of weight used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
ing it during the first few months of your exercise pro-
gram. You should progress at your own pace and be
sensitive to your body’s signals. If you experience pain
or dizziness at any time while exercising, stop immedi-
ately and begin cooling down. Find out what is wrong
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise pro-
gram.
WARMING UP
The proper amount of weight for each exercise
depends upon the individual user. You must gauge
Begin each workout with 5 to 10 minutes of stretching
your limits and select the amount of weight that is right and light exercise to warm up. Warming up prepares
for you. Begin with 3 sets of 8 repetitions for each
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of weight.
your body for more strenuous exercise by increasing
circulation, raising your body temperature and deliver-
ing more oxygen to your muscles.
WORKING OUT
Toning
You can tone your muscles by pushing them to a mod- Each workout should include 6 to 10 different exercis-
erate percentage of their capacity. Select a moderate
amount of weight and increase the number of repeti-
tions in each set. Complete as many sets of 15 to 20
repetitions as possible without discomfort. Rest for 1
minute after each set. Work your muscles by complet-
ing more sets rather than by using high amounts of
weight.
es. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
Weight Loss
To lose weight, use a low amount of weight and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
Cross Training
Cross training is an efficient way to get a complete and moving only the appropriate parts of the body.
well-balanced fitness program. An example of a bal-
anced program is:
• Plan weight training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
cycling or swimming, on Tuesday and Thursday.
• Rest from both weight training and aerobic exercise
for at least one full day each week to give your body
time to regenerate.
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. Refer to the muscle chart on page
10 to find the names of the muscles.
The repetitions in each set should be performed
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
The combination of weight training and aerobic exer-
cise will reshape and strengthen your body, plus devel- during the exertion stage of each repetition and inhale
op your heart and lungs. during the return stroke. Never hold your breath.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rest for a short period of time after each set. The
ideal resting periods are:
• Rest for three minutes after each set for a muscle
building workout.
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
For motivation, keep a record of each workout. List
the date, the exercises performed, the weight used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at
the end of every month. Remember, the key to
achieving the greatest results is to make exercise a
regular and enjoyable part of your everyday life.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
N
O
P
A. Sternomastoid (neck)
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
A
B
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
C
D
E
Q
R
S
F
L
T
L. Rectus Abdominus (stomach)
M. Adductor (inner thigh)
G
M
N. Trapezius (upper back)
O. Rhomboideus (upper back)
P. Deltoid (shoulder)
H
I
U
V
Q. Triceps (back of arm)
J
K
W
R. Latissimus Dorsi (mid back)
S. Spinae Erectors (lower back)
T. Gluteus Medius (hip)
U. Gluteus Maximus (buttocks)
V. Hamstring (back of leg)
W. Gastrocnemius (back of calf)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST/EXPLODED DRAWING—Model No. WEBE03320
R0602A
7
15
19
5
23
24
24
27
8
13
27
6
26
9
14
1
19
29
17
20
21
19
22
16
11
13
28
22
22
2
16
9
9
19
12
3
11
19
18
12
10
19
12
19
20
25
20
25
4
4
11
9
18
Key No. Qty.
12
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
1
1
2
1
1
1
1
4
2
4
4
4
1
1
4
Frame
17
18
19
20
21
22
23
24
25
26
27
28
29
#
2
4
7
4
1
4
1
4
2
2
3
1
1
1
1
M10 x 60mm Bolt
Front Leg
Rear Leg
Stabilizer
Backrest Frame
Pivot Bracket
Backrest
Seat
Foam Pad
Pad Tube
19mm Round Inner Cap
50mm Round Outer Cap
32mm Square Inner Cap
45mm Square Inner Cap
25mm x 50mm Inner Cap
M6 x 45mm Bolt
M10 x 60mm Carriage Bolt
M10 Nylon Locknut
M10 Washer
Locking Pin
M6 Washer
M10 x 85mm Bolt
M6 x 16mm Bolt
M10 x 25mm Bolt
M8 x 65mm Bolt
M8 Nylon Locknut
M4 x 16mm Screw
M8 x 25mm Bolt
User’s Manual
#
Exercise Guide
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of the user’s manual for information about ordering replacement parts.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre-
pared to give the following information:
1. The MODEL NUMBER of the product (WEBE03320)
2. The NAME of the product (WEIDER® BASICS slant board)
3. The SERIAL NUMBER of the product (see the front cover of this manual)
4. The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING on
page 11 of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which
warranty claims are made must be pre-authorized by ICON. This warranty does not extend to any product or
damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage
or repairs not provided by an ICON authorized service center; products used for commercial or rental pur-
poses; or products used as store display models. No other warranty beyond that specifically set forth above
is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential
damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or conse-
quential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 187097 R0602A
Printed in China © 2002 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|