Design for Manufacturing and Environment Document
EDGE Wireless
De-manufacturing
Instructions
\
Document Number: 480-2521-001
WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 1 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system
Download from Www.Somanuals.com. All Manuals Search And Download.
Design for Manufacturing and Environment Document
3.0 Instruction
3.1 -Remove wireless antenna and antenna hardware
Material removed (P/N
Instruction visual
& material type)
Antenna
1305-002 - TPE, PC,
reverse SMA connector, RG-
178 coaxial cable; 2.4Ghz; 2
ea.
Remove antenna by
unscrewing from chassis
post, 2 sides
Post cover
1366-001- Rubber -
Santoprene 10155A
Washer
No p/n - Gold plated brass
Nut
No p/n - Gold plated brass
Remove post cover and
hardware; 2 sides
3.2 -Remove labels, rubber feet and screw, and separate top from bottom
WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 3 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system
Download from Www.Somanuals.com. All Manuals Search And Download.
Design for Manufacturing and Environment Document
Material removed (P/N
Instruction visual
& material type)
Labels
Cert. label:
Remove rubber feet
1791-0xx – Metalized
poly-film
Serial number:
1789-00x – Poly-film
Transmit Cert/FCC/CE:
2111-00x – Metalized
Poly-film
Made in Taiwan (if appl):
1794-00x - Metalized
poly-film
Remove labels
CM identifier:
No p/n – Poly-film
Rubber Feet
1422-002 - Polyurethane
Remove screw
2130-002 - Torx pin-head
security screw; stainless
steel
Remove screw,
security head
Separate top from bottom
WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 4 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system
Download from Www.Somanuals.com. All Manuals Search And Download.
Design for Manufacturing and Environment Document
3.3 – Remove serial connector standoffs
Material removed (P/N
Instruction visual
& material type)
Stand-offs
No p/n – Hex-head;
stainless steel
Remove stand-offs
3.4 – Remove bezel from unit top - depress tabs to disengage; remove light pipe
from bezel
Material removed (P/N
Instruction visual
& material type)
Painted metal enclosure
1768-001 - 22Ga. EG
w/powder coat (Interpon 700
-epoxy/polyester)
Light-pipe
1587-001 - PC
Bezel
1590-001 - PC/ABS
Depress tabs to
disengage
Remove light pipe; clear PC
WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 5 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system
Download from Www.Somanuals.com. All Manuals Search And Download.
Design for Manufacturing and Environment Document
3.5 –Remove battery; remove screws and separate main PCBA from chassis
bottom
Material removed (P/N
Instruction visual
& material type)
Battery –coin cell
0301-001– Manganese
oxide / Lithium CR2032
Remove battery from clip
Remove screws
0863-002 - Phillips head,
stainless steel, 4 ea.
Remove PCBA screws -4 ea.
Separate PCBA from
chassis bottom
3.6 –Remove insulator shields from bottom chassis
WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 6 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system
Download from Www.Somanuals.com. All Manuals Search And Download.
Design for Manufacturing and Environment Document
Material removed (P/N
& material type)
Instruction visual
Painted metal enclosure;
chassis bottom
1769-001 - 22Ga. EG
w/powder coat (Interpon 700
-epoxy/polyester)
Insulator shields
1780-001 - Insulator,
31.3mm round, Mylar, 2 ea.
1767-001 - Insulator,
42x221mm, Mylar, 1 ea.
Remove EMI shields
3.7 –Bend RF PCBA clip (up) and remove RF PCBA from main PCBA
Material removed (P/N Instruction visual
& material type)
Main PCBA
1724-001 - Printed circuit
assembly
Remove RF PCBA
by pulling out
Release connector, 2 sides
Bend clip up
3.8 –Disconnect RF cables from RF PCBA
WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 7 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system
Download from Www.Somanuals.com. All Manuals Search And Download.
Design for Manufacturing and Environment Document
Material removed (P/N
& material type)
Instruction visual
RF PCBA
1771-001 - RF PCBA
RF Cable
1772-001 - Coaxial cable
assembly. 6cm
Remove RF Cables from
RF PCBA
RF Cable
1772-002 - Coaxial cable
assembly. 19.5cm
4.0 Applicable Documents
5.0 Revision History
REV.
NO.
REV. DATE
REVISED SECTION
REASON
ECO#
A
10/10/2005
n/a
Initial Release
0712
WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 8 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system
Download from Www.Somanuals.com. All Manuals Search And Download.
|