INSTALLATION &
OPERATION MANUAL
VC SERIES
ELECTRIC CONVECTION OVENS
MODEL
VC4ED
VC4EC
VC6ED
VC6EC
ML-126744
ML-126745
ML-126747
ML-126748
Model VC4ED
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL. (502) 778-2791
FORM 31159 Rev. B (Jan. 2002)
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation, Operation and Care of
VC SERIES
ELECTRIC CONVECTION OVENS
KEEP THESE INSTRUCTIONS FOR FUTURE USE
Your Vulcan Electric Convection Oven is produced with quality workmanship and material. Proper
installation, usage and maintenance of your oven will result in many years of satisfactory performance.
The manufacturer suggests that you thoroughly read this entire manual and carefully follow all of the
instructions provided.
GENERAL
The VC Series Electric Convection Ovens feature a 500°F thermostat, timer, porcelain interior and a
1
two-speed, /2 HP blower motor as standard equipment. Ovens equipped with standard voltages are 208
or 240 V, 60 Hz, single- or three-phase. Ovens equipped for 480 V, 60 Hz, single- or three-phase
electrical specifications are optional.
The VC Series Oven is a single cavity oven furnished with five racks. Independently opening doors
are standard; simultaneously opening doors with chain mechanism underneath are optional. Oven
lights with on-off switch are standard on all models.
An open stand with lower storage rack is available as an option.
Stacked ovens are furnished with either Stacking Kit 426983G1 (8" LEGS) or Stacking Kit 426984G1
(CASTER) for mounting one oven on top of the other.
Additional racks are available as accessories.
Features of the models are shown below:
FEATURES & OPTIONS
Stack
Kit
& Hold Timer with
Legs *
Stand Stand
with with
Rack Rack &
& Feet Casters
Oven
Model Interior Exterior Thermostat
Depth Depth
Oven
Stack Kit Legs Legs
with with with
Casters * Feet Casters
Roast 5 Hr.
Timer
261/2
"
411/2
"
VC4ED
VC4EC
VC6ED
VC6EC
Solid State 1 Hr. Dial NA
24 Hr.
Opt. Opt.
NA Opt.
Opt. Opt.
NA Opt.
Opt.
Opt.
Opt.
Opt.
Std. Opt.
Std. Opt.
Std. Opt.
Std. Opt.
Opt.
Opt.
Opt.
Opt.
Opt.
Opt.
Opt.
Opt.
(67.3 cm)
(105.4 cm)
261/2
(67.3 cm)
"
411/2
(105.4 cm)
"
Computer
Std.
Digital
301/2
(77.5 cm)
"
451/2
(115.6 cm)
"
Solid State 1 Hr. Dial NA
301/2
(77.5 cm)
"
451/2
(115.6 cm)
"
24 Hr.
Digital
Computer
Std.
* With Two Stacked Ovens Only.
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
UNPACKING
Immediately after unpacking the oven, check for possible shipping damage. If the oven is found to be
damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, verify that the electrical service agrees with the specifications on the oven data
plate, located on the inside of the top front cover.
Do not use the doors or their handles to lift the oven.
LOCATION
The installation location must allow adequate clearances for servicing and proper operation. For solid
state and digitally controlled models, there must be 18" (45 cm) of clearance on the right side of the oven
from any open flame.
INSTALLATION CODES AND STANDARDS
In the United States, install the oven in accordance with: 1) State and local codes; 2) National Electrical
Code, NFPA-70 (latest edition) and 3) NFPA Standard #96, Vapor Removal from Cooking Equipment
(latest edition), available from National Fire Protection Association, Batterymarch Park, Quincy, MA
02269.
In Canada, install the oven in accordance with: 1) Local codes; 2) Canadian Electrical Code, CSA
Standard C22.2 No. 1 (latest edition) and 3) Canadian Standard for Commercial Cooking Equipment
CSA Standard C22.2 No.109 (latest edition).
INSTALLING BASIC OVEN
The basic oven must be installed on legs or mounted on a modular stand. Installations on concrete
bases or other supports restricting air circulation underneath the oven is not advisable and may void
the warranty. If using the modular stand, set the oven on the stand after unpacking.
ASSEMBLING THE LEGS TO THE SINGLE OVEN
The legs must be installed on the bottom of the oven. Gently position the oven on its left side, taking
care not to cause scratches or damage.
Attach each of the four leg assemblies to the bottom of the oven with the 24 bolts and lockwashers
(six bolts and lockwashers per leg). Carefully raise the oven to its normal position.
LEVELING
Adjust the legs to ensure that the oven racks are level in the final installed position.
CASTERS
If the oven is to be installed on casters, assemble the casters to the legs provided. Then attach the
caster-leg units to the oven at each corner using the 24 bolts and lockwashers (six bolts and
lockwashers per leg). Place the locking casters on the front legs and nonlocking casters on the rear
legs.
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING THE STAND TO THE OVEN
BACK
Attach each of the four leg assemblies to the bottom of the
oven with the 24 bolts and lockwashers (six per leg).
Carefully raise the oven to the normal position.
Attach the undershelf to the legs with eight bolts and
lockwashers (two per leg).
Install the rack guides into the shelf at the desired locations
(for pan or flat rack), then attach the rack supports to the
top end of the rack guides. Attach rack supports to the leg
assembly by removing one middle bolt and reattaching the
back through the end holes in the rack support (Fig. 2).
FRONT
PL-53274
Fig. 2
ELECTRICAL CONNECTIONS
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE
APPLICABLEPORTIONSOFTHENATIONALELECTRICALCODEANSI/NFPA70(LATESTEDITION)
AND/OR OTHER LOCAL ELECTRICAL CODES.
WARNING:DISCONNECTELECTRICALPOWERSUPPLYANDPLACEATAGATTHEDISCONNECT
SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT.
Remove the wiring compartment cover on the front of the oven. Remove the appropriate knockout on
the bottom of the oven and attach the power supply conduit to the bottom of the oven.
Comply with the appropriate wiring diagram (located inside the right side panel) when making
connections to the electrical supply lines.
Replace the wiring compartment cover and right side panel. Turn on the power supply.
ELECTRICAL DATA
208-240 V
3-PHASE LOADING 3-PHASE LOADING
KW PER PHASE KW PER PHASE
L1-L2 L2-L3 L1-L3 L1-L2 L2-L3 L1-L3 L1
480 V
NOMINAL AMPERES PER LINE WIRE
3-PHASE
TOTAL
KW
1-PHASE
208 V
L2
240 V
L2
480 V
L2
208 V 240 V 480 V
L3
35
70
L1
33
66
L3
L1
L3
Single Oven
12.5
25
4
8
4
8
4.5
9
4
8
4
8
4.5
9
35
70
33
29
33 14.4 15.3 15.3
60
52
26
Stacked Oven
66
58
66 28.8 30.6 30.6 120 104 52
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING STACKED OVENS
Unpack the ovens and the stack kit. Position the oven to be used as the bottom oven on its left side
for access to the oven bottom, taking care not to scratch or damage it.
Attach the four leg assemblies with the 24 bolts and lockwashers (six per leg).
Place the lower oven (with legs) on the floor and remove two 7/16" (11 mm) diameter knockouts on each
side of the top cover.
Install two locating studs to the bottom of the top oven per stacking kit instructions.
Move the oven with legs to the installed position. Place the upper oven on top of the lower oven using
the locating studs.
Remove the optional rear panel, if provided, from the TOP oven. Install the Stacking Flue (Fig. 3) with
the four screws provided. Replace the top oven rear panel, if provided.
STACKING FLUE
PL-53463
Fig. 3
– 6 –
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL CONNECTIONS (Stacked Ovens)
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE
APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL
ELECTRICAL CODES.
WARNING:DISCONNECTELECTRICALPOWERSUPPLYANDPLACEATAGATTHEDISCONNECT
SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT.
Make sure that the electrical power supply agrees with the specifications on the oven data plate, the
wiring diagram on the oven and Electrical Data, page 5.
1. Wires to connect both ovens are provided with each oven. Carefully route these leads from the
top oven through the bushing (supplied with the stacking kit) through the electrical access
knockout holes common to both ovens.
2. Connect wires X, Y and Z from the upper oven to the lower oven per the wiring diagram using wire
nuts provided. Attach the power supply conduit to the bottom of the lower oven. Connect the
power supply leads to the line side of the terminal block on the bottom oven.
3. Finally, inspect and check all wiring and terminal connections for tightness or pinch points (cover
on oven frame).
4. Refer to reference drawing 426986 supplied with the stacking kit for electrical connection
instructions.
5. Refer to instructions supplied with the stacking kit for marking the combined electrical load
information to the electrical data plate of the bottom oven.
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
WARNING: THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR
PERFORMING ANY MAINTENANCE.
CONTROLS — MODELS VC4ED/VC6ED
MOVE TO VENT
MASTER SWITCH
ON
OFF
OVEN COOL
HEAT
200
400
350
375
325
150
300
275
425
450
250
225
475
500
150
F
250
100
C
TEMPERATURE
TIMER
0
5
60
45
10
25
55
50
15
20
40
30
35
FAN SPEED
HI
LIGHTS
ON
LOW
OFF
PL-53491
MOISTURE VENT DAMPER – Open the damper to exhaust excess moisture. Close the damper
when cooking dry products. Select settings between OPEN and
CLOSED for optimum performance.
MASTER SWITCH
– ON - Turns oven control circuits on.
– OFF - Turns oven control circuits off.
– OVEN COOL - Allows the fan motor to run with the doors ajar to
speed oven cooling.
ON LIGHT (Amber)
HEAT LIGHT (White)
TEMPERATURE
TIMER
– Lit when MASTER SWITCH is turned to ON.
– Comes on and goes off when the heating elements cycle on and off.
– Controls oven temperature.
– Use to set the cooking time. Alarm sounds continuously when time
has elapsed to 0. Turn the timer OFF to silence the alarm. The timer
does not turn the oven off. Keep timer set to OFF when the oven is
not in use.
FAN SPEED
LIGHTS
– Adjust air velocity in the oven cavity.
HI - Normal operating speed.
LOW - Use this setting when cooking a delicate product like
meringue, which could blow around in the oven.
– ON - Turns the interior lights on.
– OFF - Turns the interior lights off.
– 8 –
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE FIRST USE (All Models)
Before using the oven for the first time, it must be burned off to release any odors that might result from
heating the new surfaces in the chamber.
1. Using a clean damp cloth, wipe the inside of the oven, including the racks.
2. Close the oven doors, turn the MASTER SWITCH to ON, turn the Thermostat to 300°F (149°C)
and allow the oven to cycle for 6 to 8 hours before turning the MASTER SWITCH to OFF.
USING MODELS VC4ED/VC6ED
Preheating
1. Turn MASTER SWITCH to ON. Amber ON light will come on, indicating that power to oven is on.
2. Set Thermostat as desired. Refer to COOKING GUIDELINES for suggested temperatures and
times for various products.
3. Prepare product and place in suitable pans. When white HEAT light goes off, oven has reached
desired preheat temperature.
Cooking
1. Open doors and load the product into the oven. Place pans in the center of the racks. Close doors.
2. Set the Timer. After the preset time lapses, turn Timer to OFF position to stop alarm.
3. When product is done, open doors and carefully remove cooked product from the oven. Care
should be taken when wiping up any spills, as oven is still hot.
End of Day
1. Turn Thermostat to OFF.
2. Turn MASTER SWITCH to OVEN COOL. Leave doors open while the fan is on to cool the oven.
3. When oven has cooled sufficiently, turn MASTER SWITCH to OFF and clean the oven.
– 9 –
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS — MODELS VC4EC/VC6EC
Always displays [HR:Min] when setting the Time.
Displays [HR:Min] if the countdown Time is more than 1 Hour.
Displays [Min:Sec] if the countdown Time is less than 1 Hour.
Displays Temperature in °F.
R & H
MODE
Indicates the oven is in the Roast and Hold Mode.
Indicates the oven is preheated and ready for cooking.
Indicates the oven is preheating.
R & H
MODE
OVEN
READY
OVEN
HEATING
MENU SELECT
OVEN
READY
PRIMARY
OVEN
HEATING
SECONDARY
1
Primary indicates Menu Items 1, 3 or 5.
Secondary indicates Menu Items 2, 4 or 6.
PRIMARY
SECONDARY
SET
2
3
4
Up arrow increases and Down arrow decreases a displayed
Time or Temperature value (if arrow keys are lit).
1/2
3/4
TEMPERATURE: Use with SET to set the oven temperature.
ROAST
&
HOLD
SET
SET: Use with Time or Temperature.
START
STOP
TIME: Use with SET to manually set the time.
Selects Roast & Hold mode; also selects Low Fan Speed.
Press once to start; press a second time to stop.
5
5/6
MENU
RACK
ROAST
&
HOLD
START
STOP
POWER
LIGHTS
ON
ON
Press once for Primary Menu Items (1, 3 or 5).
1/2
3/4
5/6
OFF
Press a second time for Secondary Menu Items (2, 4 or 6).
OVEN
COOL OFF
Rack Buttons select individual Menu/Rack Number
1
5
3
2
4
Cook Times — once programmed.
PL-53464
– 10 –
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUALLY SETTING THE TEMPERATURE AND COOK TIME
To Set the Temperature
1. Press the SET button. Press the TEMPERATURE button; StPt displays to indicate Setpoint.
2. Use the Up and Down arrow keys to increase or decrease the displayed Temperature value.
3. Press the SET button again to save the Temperature setpoint in the computer.
To Set the Cook Time
1. Press the SET button. Press the TIME button. Tine displays to indicate TIME.
2. Use the Up and Down Arrow keys to increase or decrease the displayed Cook Time (HR:Min).
3. Press the SET button again to save the Time setting in the computer.
To Start Cooking
1. Press the START/STOP button.
2. The manual Cook Time counts down to 00:00. Displays [HR:Min] above 1 hour; [Min:Sec] below.
3. The buzzer will sound. To silence the buzzer, press the START/STOP button again.
4. The control retains the manual settings for Temperature and Time.
TO PROGRAM MENU ITEM AND RACK NUMBER COOK TIMES
Factory Preset and Programmable Cook Times are shown in the table, below:
PROGRAMMABLE VALUES
RACK 2 RACK 3
COOK TIME COOK TIME COOK TIME COOK TIME COOK TIME COOK TIME
FACTORY PRESET
MENU ITEM
MENU
SELECTION
MENU
ITEM
MENU ITEM
RACK 1
RACK 4
RACK 5
COOK TIME
1/2 Primary
1
2
3
4
5
6
10 min.
15 min.
20 min.
25 min.
30 min.
35 min.
1/2 Secondary
3/4 Primary
3/4 Secondary
5/6 Primary
5/6 Secondary
The Primary indicator light with Menu 1/2 selects Menu Item 1 (Factory Preset Cook Time = 10 minutes).
The Secondary indicator light with Menu 1/2 selects Menu Item 2 (Factory Preset Cook Time = 15
minutes). This is similar, for Menu Buttons 3/4 or 5/6. Any menu item cook time can be changed using
the procedure below. Rack number Cook Times may be programmed if desired but are not required.
To Change the Time Setting for any Menu Item (1 – 6)
1. To enter program mode, press and hold the Up and Down arrow buttons until PrOG displays.
2. Select the Menu Item to be programmed (1 – 6). Tine displays to indicate TIME. Use the Up and
Down arrow buttons to increase or decrease the Menu Item's COOK TIME. Repeat this step for
any other Menu Items.
3. Press the START/STOP button; LOC displays. Press the START/STOP button a second time to
save the Menu Item(s)' COOK TIME(s).
4. Press the START/STOP button once to begin cooking (with the Menu Item's Cook Time). To exit,
press the START/STOP button a second time.
To Program Individual Rack Number Cook Times for a Menu Item
1. To enter program mode, press and hold the Up and Down arrow buttons until PrOG displays.
2. Select the Menu Item to be programmed (1 – 6); Tine displays to indicate TIME.
3. Then select the rack number (1 – 5). [t 1] indicates rack 1; [t 2] indicates rack 2 and so on. Use
the Up and Down arrows to increase or decrease the COOK TIME for any rack number.
4. Press the START/STOP button; LOC displays. Press the START/STOP button a second time to
save the Menu/Rack Number's COOK TIME(s).
5. To exit program mode, press START/STOP twice.
– 11 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Always Set the Temperature Before Setting the Time
1. Press the SET button. Press the TEMPERATURE button; StPt displays. Use the Up and Down
Arrow keys to increase or decrease the temperature. To save, press the SET button again.
At startup, the display will initially show a GROWING BAR. When the oven temperature reaches the
Set Point, the set temperature displays. The READY light is lit, the HEAT light goes out and the oven
is ready for you to select the Cook Time, Menu Item Cook Time or Menu/Rack Number Cook Time.
Starting a Timed Cycle On All Racks
1. Open the door; door will display.
2. Place the desired product on any of the five racks.
3. Close the door. The display should return to the set temperature or the GROWING BAR.
4. Press the Menu Key once for Primary or twice for Secondary to select a Menu Item Cook Time.
5. Press the START/STOP button. Pressing the START/STOP button after making a menu selection
will time all racks for the selected menu time.
6. The timer will count down the time remaining for the Menu Item Cook Time.
7. When the time has counted down to 00:00, the buzzer will sound and all Rack Buttons will flash.
8. To silence the buzzer, press the START/STOP button.
Starting a Timed Cycle Using Programmed Individual Menu/Rack Number Cook Time(s)
1. After the set temperature is reached, open the door; door displays. Place product(s) in oven.
2. Close the door. The display returns to the set temperature or the GROWING BAR.
3. Select the Menu Item (once for Primary or twice for Secondary) and the Rack Number to select
the Menu/Rack Number Cook Time. If using simultaneous cook times, select the other Menu/
Rack Number's.
4. The timer selects the rack number with the shortest cook time and counts down to 00:00.
5. The buzzer sounds and the rack number flashes. To silence the buzzer, press the flashing Rack
Number.
6. Open the door; door displays. Remove the finished product and close the door.
7. The next shortest cook time displays, its rack number flashes and the time counts down to 00:00.
8. The buzzer sounds. Press the flashing Rack Number. Open the door; door displays. Remove the
product and close the door.
9. Repeat steps 7 through 8 until all rack number's are done.
To Display the Actual Oven Temperature
1. Press and hold the Temperature button for three seconds to display Actual Oven Temp until
released.
To End a Cooking Cycle
At the end of a cooking cycle, the alarm will sound. To silence the alarm and end a Menu Item cooking
cycle, press START/STOP. To silence the alarm and end a rack number cooking cycle, press the Rack
Number.
To cancel a cooking cycle which might have been started in error, press and hold the Rack Number
button to be terminated and press START/STOP at the same time.
Door and Timing
Opening the door while loading additional product will interrupt all timing functions until the door is
closed and the timer resumes. For example, if a product time had diminished to 1 minute and the door
was opened for 30 seconds and then closed, the timer would still show 1 minute.
– 12 –
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE OVEN FOR ROAST & HOLD
1. Press the ROAST & HOLD button to select Roast & Hold.
2. Set the first stage Temperature and the Cook Time as described in: MANUALLY SETTING THE
TEMPERATURE AND COOK TIME. Press START/STOP to begin cooking.
3. The HOLD Temperature is preset by the computer control at 150°F (66°C).
4. The LOW FAN SPEED is present during Roast & Hold. Use Roast & Hold to select LOW FAN
SPEED.
ROAST & HOLD OPERATION — Models VC4EC and VC6EC
Roast & Hold cooks the product in two stages. During First Stage Cooking, the oven temperature is
regulated by the Temperature setpoint and the Time setting. After the time counts down to 00:00,
Second Stage Cooking begins. During Second Stage Cooking, the heating elements are off as the
temperature in the oven declines to the Hold Temperature. The doors should remain closed during
Second Stage Cooking.
When the Hold temperature is reached, the display flashes HOLD. Temperature in the oven will be
maintained at the Hold temperature until the oven is turned off.
ROAST AND HOLD DIAGRAM - Time vs. Temperature
OVEN TEMPERATURE
SHORT BEEP.
400ºF
300ºF
200ºF
100ºF
TIMER DISPLAY COUNTS DOWN.
TIMER DISPLAYS "HOLD."
ROAST THERMOSTAT OFF.
HEATERS OFF UNTIL HOLD
TEMPERATURE IS REACHED.
COOKING FROM
STORED HEAT
HEATERS MAINTAIN
HOLD TEMPERATURE.
TIMER DISPLAY FLASHES
"HOLD."
LOAD PRODUCT
INTO OVEN
PRODUCT TEMPERATURE
TEMP.
PREHEAT
FIRST STAGE COOKING
SECOND STAGE
HOLDING
COOKING
(DO NOT OPEN
DOORS)
TIME
PL-53493
PROPER UTENSILS
The use of proper utensils can enhance oven operation. Medium and lightweight pans allow the product
to warm faster. Roast meats in shallow pans deep enough to hold all juices yet allow free air circulation.
OPERATING HINTS
When using the convection oven for the first time with a particular food, check the degree of doneness
periodically before the suggested time has elapsed. This will ensure the desired doneness is achieved.
Record your temperature and time settings for various products. The convection oven can provide
consistent and repeatable results.
The convection oven is faster than conventional deck-type ovens; temperature settings are lower and
cook times are shorter. Since recipes and foods are subject to many variations and tastes, the
guidelines regarding Times and Temperatures in this manual are SUGGESTIONS ONLY. Experiment
with your food products to determine the cooking temperatures and times that give you the best results.
NOTE: For a more even bake in models VC6ED and VC6EC, place the pans horizontally in the center
of the oven rack and decrease the suggested cooking temperature by 50°F (10°C).
– 13 –
Download from Www.Somanuals.com. All Manuals Search And Download.
COOKING GUIDELINES
The information in the Cooking Guidelines chart is suggested only. Cooking times for various products
may be different depending on the brand, consistency and the chef’s preferences for taste and
presentation. The times below may require adjustments. Note the times and temperatures of your
preferred results for future use. The preheating time for all of the following is 15 minutes. The computer
control's Holding Temperature is preset at 150°F (66°C) and cannot be changed.
COOKING GUIDELINES (HOLDING FEATURE)
Cooking Cooking
Min. Hold Max. Internal
Internal
Amount
lbs. (kg)
Temp.
Time
Time
Cook Temp. Hold Temp.
Product
°F (°C)
Hours
Hours
°F (°C)
°F (°C)
Prime Rib
20 (9.06)
12 (5.43)
20 (9.06)
20 (9.06)
20 (9.06)
12 (5.43)
6 (2.71)
225 (107)
225 (107)
225 (107)
225 (107)
225 (107)
225 (107)
225 (107)
225 (107)
225 (107)
225 (107)
225 (107)
225 (107)
250 (121)
250 (121)
250 (121)
250 (121)
250 (121)
225 (107)
250 (121)
250 (121)
350 (177)
350 (177)
250 (121)
5
4
140 (60)
140 (60)
140 (60)
140 (60)
140 (60)
140 (60)
140 (60)
140 (60)
165 (74)
180 (82)
175 (79)
175 (79)
165 (74)
165 (74)
135 (57)
175 (79)
175 (79)
175 (79)
160 (71)
170 (77)
N/A
Rib Eye Boneless
Top Round
3
4
5
4
Steamship Round
Bottom Round
7
2
5
8
Boneless Strip Loin
Whole Tenderloin
Top Sirloin Butt
Beef Short Ribs
Cube Steaks
3
4
2
2
14 (6.34)
10 (4.53)
10 (5.43)
30 (13.6)
10 (5.43)
12 (5.43)
12 (5.43)
12 (5.43)
10 (4.53)
30 (13.6)
10 (4.53)
10 (4.53)
30 (13.6)
3
4
4
4
3
3
Beef Back Ribs
Beef Stew
5
4
4
6
150 (66)
150 (66)
Corned Beef
4
4
Fresh Ham
6
4
Cooked Cured Ham
Pork Back Ribs
Pork Spare Ribs
Fresh Sausages
Pre-Cooked Sausage
Roast Suckling Pig
Bacon
4
4
5
3
150 (66)
150 (66)
5
4
2
13/4
5 (Max)
51/2 (Max)
3
6
155 (68)
150 (66)
40 min.
45 min.
21/2
Roasted Chicken
Chicken Pieces (per tray)
Whole Chickens
(per chicken)
10 (4.56)
10 (4.56)
N/A
165 (74)
170 (77)
1
/
2
(Max)
3.25 (1.47)
20 (9.06)
10 (4.53)
4 (1.81)
250 (121)
230 (110)
250 (121)
350 (177)
250 (121)
21/2
61/2
5
11/2
31/2
41/2 (Max)
12 (Max)
1
170 (77)
170 (77)
160 (71)
170 (77)
160 (71)
140 (60)
160 (71)
150 (66)
150 (66)
Whole Turkeys
Bone In Turkey Breast
Roast Duckling (per duck)
Rack of Lamb
3 (Max)
21/2
15 racks
per tray
Lamb Shanks, Braised
Fish Filets
250 (121)
225 (107)
4
4
4
180 (82)
160 (71)
150 (66)
4-6 oz. (23g)
40 min.
1/1 Gastronome
Clear Soups
or 12x20x4"
Steam Pan
(2) 18” Pies
225 (107)
3
Overnight
175 (79)
150 (66)
Frozen Pizza
Rice
350 (177)
250 (121)
350 (177)
15 min.
2
175 (79)
160 (171)
200 (93)
160 (71)
N/A
1 Qt. dry
90 CT.
2
1
18
11/2
Baked Potatoes
170 (77)
– 14 –
Download from Www.Somanuals.com. All Manuals Search And Download.
STANDARD COOKING TIME CHART
Product
Amount
Temp.
Time
Frozen Croissant Dough
Cinnamon Croissant
Small Bread Loaves
Large Bread Loaves
1.75 oz.
1.75 oz.
1 Tray
350°F (177°C)
350°F (177°C)
350°F (177°C)
350°F (177°C)
300°F (149°C)
350°F (177°C)
350°F (177°C)
350°F (177°C)
350°F (177°C)
350°F (177°C)
350°F (177°C)
325°F (163°C)
25 Min
35 Min.
30 Min.
60 Min.
25 Min.
30 Min.
30 Min.
16 Min.
40 Min.
30 Min.
60 Min.
16 Min.
1.5 lbs.
Sheet Cake
Scone Mix
(1) 18x26" Tray
1 Tray
Muffin Mix
1 Tray
Kaiser Rolls
Italian Bread
Danish Rounds*
Cream Cake*
Cookies
1 Tray
1 Tray
1 Tray
1 Tray
1 Tray
*The maximum internal cooking temperature should be 190°F (88°C).
POWER OUTAGE
In case of a power outage, the oven will automatically shut down. When power is restored to the lines,
the oven will resume its normal operation. However, if the oven is to be left unattended during a power
outage, push the MASTER SWITCH to the OFF position. When power is restored to the lines, push
MASTER SWITCH to the ON position, wait for the oven to preheat, then resume normal cooking
operations.
CLEANING
WARNING: DISCONNECT ELECTRICAL SUPPLY AND PLACE A TAG AT THE DISCONNECT
SWITCH TO INDICATING THAT YOU ARE WORKING ON THE OVEN BEFORE CLEANING.
•
•
Clean outside of the oven daily by wiping with a clean, damp cloth.
Clean porcelain oven interior daily with soap or detergent and water. Rinse thoroughly and wipe
dry with a soft, clean cloth.
Optional Stainless Steel Oven Interior
Soap or detergent and water usually handle routine cleaning. Rinse thoroughly and dry with a soft, clean
cloth.
For burned-on foods and grease which resist simple soap and water cleaning, an abrasive cleanser
(scouring powder) mixed into a paste may be used. Apply with stainless steel wool or sponge, always
rubbing with the grain.
This treatment is equally effective for "heat tint" (slightly darkened areas caused by oxidation). Again,
remember to rub in the direction of the polish lines. Rinse with clear water and dry with a soft cloth.
– 15 –
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
WARNING: THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR
PERFORMING ANY MAINTENANCE.
WARNING: DISCONNECT ELECTRICAL SUPPLY AND PLACE A TAG AT THE DISCONNECT
SWITCH TO INDICATING THAT YOU ARE WORKING ON THE OVEN BEFORE PERFORMING ANY
MAINTENANCE.
The fan motor comes with sealed bearings and requires no lubrication.
Annually check the vent, when cool, to be sure it is free of obstructions.
REPLACING LAMPS
1. Allow oven to cool.
2. Remove all racks by pulling forward, lifting up and out.
3. Unscrew glass dome(s) from light body.
4. Replace the bulb(s).
5. Reassemble glass dome(s) and racks by reversing the disassembly procedure.
SERVICE AND PARTS INFORMATION
To obtain service and parts information concerning your VC Series Oven, contact the Vulcan-Hart
Service Depot in your area (refer to listing supplied with this oven) or Vulcan-Hart Company Service
Department at the address or phone number shown on the front cover of this manual.
FORM 31159 Rev. B (Jan. 2002)
– 16 –
PRINTED IN U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|