VIZIO
QUICK START GUIDE
Download from Www.Somanuals.com. All Manuals Search And DowMnloado. del: S5451w-C2
TABLE OF CONTENTS
Package Contents.................................................................. 4
Controls & Connections ......................................................... 5
First-Time Setup ....................................................................... 8
Connecting with HDMI ........................................................... 10
Using the Remote.................................................................... 17
Settings and LED Behavior...................................................... 18
Programming the Sound Bar.................................................. 20
Resetting to Factory Default Settings ..................................... 21
Bluetooth Pairing..................................................................... 22
Using Bluetooth Mode ............................................................ 23
Advanced Setup .................................................................... 24
Wall Mounting the Sound Bar ................................................ 26
Re-linking the Subwoofer with the Sound Bar........................ 28
Wall Mounting the Satellite Speakers..................................... 29
Help & Troubleshooting .......................................................... 31
One-Year Limited Warranty..................................................... 32
Specifications.......................................................................... 32
Legal & Compliance .............................................................. 33
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKAGE CONTENTS
VIZIO
INPUT
MENU
Remote Control
with Batteries
This Quick
Start Guide
High Definition Sound Bar with
Wireless Subwoofer
2 x Satellite Speakers
Digital Optical
Cable
Stereo RCA to 3.5mm
Audio Cable
Coaxial Audio
Cable
2 x Satellite Speaker
Audio Cables
2 x Power
Cables
2 x Sound Bar Wall
Mount Brackets
2 x Sound Bar Wall
Wall Mount
Template
HDMI Cable
Mount Lugs
(Size: M4 x 10)
2 x Satellite Speaker
Wall Mount Lugs
(Size: M4 x 8)
2 x Satellite Speaker
Wall Mount Brackets
4 x Velcro
Cable Ties
Download from Www.Somanuals.com. All Manuals Search And Download.
4
CONTROLS & CONNECTIONS
Back of Sound Bar
AUX (1)
RCA Analog Audio In
USB (7)
Power Port
Service Port
(For use by authorized
technician only)
OPTICAL (4)
Digital Optical Audio In
HDMI OUT
(ARC) (6)
AUX (2)
3.5mm Analog Audio In
HDMI IN (5)
DIGITAL (3)
Digital Coaxial Audio In
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Control Buttons
are located here
Power
Input
Bluetooth Input
(Hold to pair device, See Bluetooth Pairing for more information.)
Volume
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Back of Subwoofer
Back of Satellite Speaker
Pairing Button
LED Indicator
Satellite Speaker Port
Satellite Speaker
(Connects to Subwoofer)
Ports
(Connects to Speakers)
Power Switch
Power Port
Download from Www.Somanuals.com. All Manuals Search And Download.
7
FIRST-TIME SETUP
Back of Sound Bar
1
GOOD
BETTER
BETTER
GOOD
3.5MM TO RCA
CABLE
DIGITAL OPTICAL
CABLE†
DIGITAL COAXIAL
CABLE†
3.5MM TO RCA
CABLE
Note: Cables’appearance may differ from the ones supplied.
CHOOSE ONE CABLE:
GOOD
BETTER
BEST
AND CONNECT IT TO YOUR TV*
†
*
Not all TVs have the audio outputs shown above.To connect the Sound Bar directly to your other devices
(Blu-ray player, game system, etc) see your device’s user manual.
When using the Digital Inputs, if there is no audio: (A) try setting the TV output to PCM or (B) Connect directly to
your Blu-ray/other source, some TVs do not pass through digital audio.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Do not use HDMI IN for First-Time Setup.
See Advanced Setup if you would like to
connect HDMI devices (such as Blu-ray™
players, cable boxes, and game consoles) to
your Sound Bar.
BEST
HDMI CABLE†
HDMI cables send Video (Out)
and receive Audio from the TV. See
Connecting with HDMI on page
10 for more information.
Connect the Sound Bar to your TV* using one
of the connection types to the left. Choose
the best possible connection type.Be sure the
TV port is an audio output,not an audio input.
†
*
Not all TVs have the audio outputs shown above.To connect the Sound Bar directly to your other devices
(Blu-ray player, game system, etc) see your device’s user manual.
When using the Digital Inputs, if there is no audio: (A) try setting the TV output to PCM or (B) Connect directly to
your Blu-ray/other source, some TVs do not pass through digital audio.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
CONNECTING WITH HDMI
What is HDMI Audio Return Channel (ARC)?
To connect using HDMI*:
Using HDMI ARC, your TV can send audio to the sound
bar using an HDMI cable.
1. Connect one end of the HDMI cable to the HDMI 1
(ARC) port on the back of your TV.
You will need to connect your sound bar to yourTV’s HDMI
ARC port using an HDMI cable that is ARC compatible.
2. Connect the other end to the HDMI OUT (ARC) port
on your VIZIO sound bar.
3. From the AUDIO menu on your TV, change the
Digital Audio Setting to Dolby Digital or Bitstream.
4. From the AUDIO menu, disable the TV’s internal
speakers.
5. From the SYSTEM menu, enable CEC† Function.
6. From the CEC menu, select Device Discovery to
register the sound bar with the TV.
If you want to use the volume buttons on
the TV remote control to control the sound
bar, enable System Audio Control from the
CEC menu.
* The following steps are for use with a VIZIO TV, steps may differ by TV manufacturer. See your TV’s user manual for more information.
† CEC Function naming may differ by TV manufacturer. See your TV’s user manual for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Back of TV*
Connect to HDMI (ARC) port on your TV
Back of Sound Bar
* HDMI ARC port location may differ by TV manufacturer. SeDe oyowunr TloVa’sdusferor mmaWnuwalwfo.Sr momoreaninufoarmlsa.ctioomn.. All Manuals Search And Download.
11
2
Connect the Power Cable to
the back of the Sound Bar.
3
Plug the Power Cable into
a power outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
BACK OF SUBWOOFER
4
5
6
Connect a Power Cable
to the Subwoofer.
Plug the Power Cable into
a power outlet.
Flip the Power Switch into
the On position.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Connect the Satellite Speakers to the Subwoofer
using the included Satellite Speaker Audio Cables.
7
Match the color coded speaker
cable to the matching speaker
port color.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
8
Sound Bar is centered
below the TV.
For the best surround sound experience, position the Sound Bar as shown.
The Sound Bar should be close to ear level.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Locate the arrow on the battery cover and
gently slide it away from the remote with your
thumb. Insert the included AAA batteries,
matching the + and - symbols.
10 Turn your TV on, then press the Power button
on the remote to turn the Sound Bar on.
9
Turn off the TV Speakers through the Settings
Menu on your TV. See your TV’s user manual
for more information.
Gently slide the battery cover back in place.
Press the INPUT button to switch between
audio sources. For example, if you connected
your TV to Input 1,set the Sound Bar to Input 1.
Hardware Setup is complete.
VIZIO
INPUT
MENU
Input
Power
Download from Www.Somanuals.com. All Manuals Search And Download.
16
USING THE REMOTE
Display
Menu
Displays Sound Bar settings
Press to access the menu settings.
VIZIO
Input
Power
Press to turn on or off.
Press to change input source.
INPUT
MENU
Up/Down
Press to cycle through settings
and options.
Enter/Play/Pause
Press to select an option.
Press to Play or Pause.
Previous
Press to return to previous track.
Next
(Changes audio settings in Menu)
Press to skip to the next track.
(Changes audio settings in Menu)
Volume -
Press to decrease volume.
Volume +
Press to increase volume.
Mute
Press to mute/unmute.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
SETTINGS AND LED BEHAVIOR
LED Indicators are located here
Press the MENU button and use the Up/Down Arrow buttons on the remote to access the different functions and acoustic settings of
the Sound Bar. Each function and setting will be displayed on the remote control’s LCD display.The LED Indicators will behave differently
with each function.
Function
Bluetooth Pairing
BT Pair
LED Behavior
(When searching for device)
Flash from Left to Right
and back continuously.
Description
Press the Play button on the remote.The Sound Bar will be discoverable for 15 minutes. You
can now search for the Sound Bar (VIZIO S5451w) using your Bluetooth Device.The sound bar
will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
Bass Levels
Two center LEDs indicate
Bass level 0.
Press the Next/Previous button to increase/decrease the bass level. The LED indicators will
move to the right with increasing levels and to the left with decreasing levels.
Bass
Treble Levels
Two center LEDs indicate
Treble level 0.
Press the Next/Previous button to increase/decrease the treble level.The LED indicators will
move to the right with increasing levels and to the left with decreasing levels.
Treble
Center Levels
Press the Next/Previous button to increase/decrease the presence of dialog in the center
channel.The LED indicators will move to the right when the center level is increased and to
the left when the center level is decreased.
Two center LEDs indicate
dialog is centered.
Center
Surround Levels
Two center LEDs indicate
surround levels are centered.
Press the Next/Previous button to increase/decrease the surround sound level. The LED
indicators will move to the right with increasing levels and to the left with decreasing levels.
Surround
Two center LEDs indicate
surround balance
is centered.
Surround Balance
Press the Next/Previous button to increase/decrease the surround balance level on each
side.The LED indicators will move to the right/left with balance levels for each side.
Surr Bal
Subwoofer Levels
Two center LEDs indicate
Subwoofer level 0.
Press the Next/Previous button to increase/decrease the level of the subwoofer. The LED
indicators will move to the right with increasing levels and to the left with decreasing levels.
Subwoofer
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Function
LED Behavior
Description
Surround On:
Surround
On/Off
Press the Next/Previous button to enable/disable Surround. When enabled (On), the current
input will produce surround sound through all 5.1 channels. When disabled (Off), the current
source will playback on 3.1 channels (Left,Center,Right,and Sub).
Surround Off:
Surnd
TruVolume On:
TruVolume Off:
DTS TruVolume
On/Off
Press the Next/Previous button to enable/disableTruVolume.When enabled (On),TruVolume
provides a consistent and comfortable volume level for a more enjoyable listening experience.
TruVol
Night Mode On:
Night Mode Off:
Night Mode On/Off
Press the Next/Previous button to enable/disable Night Mode. When enabled (On), the
Sound Bar will lower bass frequency levels to provide a more quiet environment (ideal for
apartment living and homes with sleeping children).
Night
Two LEDs on
the left indicate
no delay.
AV Delay
Press the Next/Previous button to increase/decrease the amount of audio delay. The LED
indicators will move to the right with increasing audio delay levels.
AV Delay
Noise
The Sound Bar, Satellite Speakers, and Subwoofer will emit pink noise to ensure that the
system is connected properly.The pink noise will emit in the following sequence: left channel,
center channel, right channel, right satellite speaker, left satellite speaker, and subwoofer.
---
Noise
TV Remote On:
TV Remote Off:
TV Remote
Press the Next/Previous button to enable/disable VIZIO TV Remotes.When enabled (On), you
can use a VIZIO TV remote control to turn on the Sound Bar (using the TV Volume Up button)
and control volume.
VZtvRmt
On
Eco Power On:
Eco Power Off:
Press the Next/Previous button to enable/disable Eco Power Mode.When enabled (On),the
Sound Bar will go into standby after a period of inactivity.The sound bar will automatically turn
off when no audio signal is detected. Off disables this feature.
Eco Power On/Off
EcoPwr
On
Note: Enable this function if using a TV remote to control the sound bar.
Program Remote
Press the Next/Previous and Play buttons to toggle and select and program your TV remote
to control the Volume Down, Volume Up, and Mute functions on your Sound Bar. See
Programming the Sound Bar on page 20.
---
---
Prg Remote
Reset
Press the Next/Previous and Play buttons to select and reset your remote and Sound Bar to
the factory default settings.All paired Bluetooth devices will be unpaired.All programmed IR
remotes will also be removed. See Resetting to Factory Default Settings on page 21.
Reset
No
Dolby Digital Logo
DTS Logo
When a Dolby
Dolby Digital and DTS are only available on either the HDMI, Digital Coaxial Audio In, or Digital
Optical Audio In inputs.When a Dolby Digital or DTS signal is detected,the Dolby Digital or DTS
logo will light up for 5 seconds before fading away.
Digital or DTS signal
is detected
Download from Www.Somanuals.com. All Manuals Search And Download.
19
PROGRAMMING THE SOUND BAR
You can program your Sound Bar to accept TV remote IR commands. Press the MENU button on the remote, then use the Up/Down
buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn Vol +, and Learn Mute.
Function
LED Behavior
Description
Press the Play button to put the Sound Bar into learning mode.
While the Sound Bar is in learning mode, press the Volume
Down button on the TV remote control.All of the LED Indicators
on the Sound Bar will flash two times indicating that it has
successfully recognized the TV remote.
Learn Volume
Down
(Waiting to learn)
Flash from
Learn
Vol -
Left to Right
and back
continuously.
Press the Play button to put the Sound Bar into learning mode.
While the Sound Bar is in learning mode, press the Volume Up
button on the TV remote control.All of the LED Indicators on the
Sound Bar will flash two times indicating that it has successfully
recognized the TV remote.
Learn Volume
Up
Learn
Vol +
All of the LEDs
will blink twice to
confirm.
Press the Play button to put the Sound Bar into learning mode.
While the Sound Bar is in learning mode, press the Mute button
on the TV remote control.All of the LED Indicators on the Sound
Bar will flash two times indicating that it has successfully
recognized the TV remote.
Learn Mute
Learn Mute
Ensure that both the Sound
Bar and TV remotes are
pointed at the front of the
Sound Bar.
When programming your
Sound Bar, turn off your TV
speakers.
VIZIO
INPUT
MENU
TV Remote
Download from Www.Somanuals.com. All Manuals Search And Download.
20
RESETTING TO FACTORY DEFAULT SETTINGS
You can reset your Sound Bar to factory default settings.
Note: All of your settings will be lost. Paired Bluetooth devices will need to be re-paired.
Function
Reset
LED Behavior
Description
To reset the Sound Bar to factory default settings:
1. Press the MENU button on the remote control.
Reset No
All Indicator LEDs
will flash three
times confirming
factory reset.
2. Use the Up/Down buttons to navigate to Reset No.
Reset Yes
ConfirmYes
Confirmed
3. Press the Next button to navigate to Reset Yes and press the
Play button.
4. ConfirmYes is displayed. Press the Play button to continue.
5. Confirmed is displayed.All of the Indicator LEDs on the
sound bar will flash three times confirming the reset.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
BLUETOOTH PAIRING
To pair the Sound Bar with a Bluetooth device:
1. Press and hold the Bluetooth button
on the Sound
2. You can now search for the Sound Bar (VIZIO S5451w)
using your Bluetooth device. For more information, see
the documentation that came with your device.
Bar for five (5) seconds or select the BT Pair option on
the remote.When the Sound Bar is in Bluetooth Pairing
Mode, the LED Indicators on the Display Panel on the
front of the Sound Bar will light sequentially from left to
right and back again.
3. Play audio from your Bluetooth device.Volume can be
controlled on your source device and
the Sound Bar.
Once the device is paired, the LED Indicators will stop
flashing.
Back of Sound Bar
Download from Www.Somanuals.com. All Manuals Search And Download.
22
USING BLUETOOTH MODE
Your Sound Bar supports music streaming from
smartphones, tablets, and computers with Bluetooth
capability. Device compatibility will vary, see your
device’s documentation for more information.
Maximizing Signal
A Bluetooth signal has a range of up to 30 feet. Keep
in mind that Bluetooth is a compressed audio format,
so streamed music may lose some integrity when
compared to a wired connection.
Once you have paired your source device to the Sound
Bar, as long as you stay within range of the Sound Bar,
your device should remain paired, even if you change
the input on the Sound Bar.
Try the following if your sound quality is less than
optimal:
•
•
•
If you hear any break-up or disconnect while
streaming music from your device, move the
source device closer to the Sound Bar.
Note: YourSoundBarisnotequippedwithamicrophone,
and therefore cannot operate as a hands-free device
for a smartphone.
Be sure that there are no solid obstructions in
the line-of-sight between the Sound Bar and the
source device.
Did you know?
Your Sound Bar has aptX® built-in,
allowing it to deliver the same audio
quality as a wired connection,wirelessly
over Bluetooth®.*
Other wireless devices can affect Bluetooth
range, including wireless security cameras,
wireless video baby monitors, cordless phones,
and microwave ovens. Turning off or moving
these devices may improve Bluetooth range.
*
Source Bluetooth playback device must be enabled with aptX® technology. Products without aptX® technology will still playback over standard Bluetooth®.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
ADVANCED SETUP
Connect up to five different devices to the Sound Bar (devices shown are examples--you can use any device).
Back of Sound Bar
DIGITAL
OPTICAL
CABLE*
DIGITAL
COAXIAL
CABLE*
3.5MM TO RCA
CABLE*
3.5MM TO
RCA CABLE*
Optical, Coaxial, and
3.5mm cables transmit
audio only.If connecting
a video device, you will
need a separate video
connection from the
device to your TV.
OR
OR
Game Console
Network Media Player
Tablet/MP3 Player/Laptop
Download from Www.Somanuals.com. All Manuals Search And Download.
*Cables appearance may differ from the ones supplied.
24
Connect HDMI (ARC) to your TV
HDMI cables transmit both audio and video. To view video from
these devices, turn the Sound Bar on, then set the Sound Bar input
to HDMI-ARC 6. Set your TV input to the HDMI port to which the
Sound Bar is connected.
HDMI
CABLE*
OR
Blu-ray Player
Cable/Satellite Box
*Cables appearance may differ from the ones supplied.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
WALL MOUNTING THE SOUND BAR
1
Wall-Mount
Screw Holes
InsertandtightentwoWall-MountScrewswithaPhillips-head
screwdriver into the Wall-Mount Screw Holes.
2
Place the included wall mounting template against the wall
under your TV. Mark the four bracket holes using a pencil.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Be sure your screws are attached
to wood studs or drywall anchors
(for drywall) or concrete anchors
(for brick/concrete walls). Wall
mounting hardware is not included.
3
38.6 in
(980 mm)
Wall Mount Screw
Screw Size: M4 x 10
If you are unfamiliar with power tools or the layout of
electrical wiring in the walls of your home, consult a
professional installer.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
RE-LINKING THE SUBWOOFER WITH THE SOUND BAR
Your Subwoofer has already been paired with your
Sound Bar by VIZIO. However, you may need to re-link
the Subwoofer to the Sound Bar if there is no sound
coming from the Subwoofer.
What does pairing mean?
Pairing means to wirelessly connect.
1
2
Back of Sound Bar
Back of Subwoofer
First confirm that the power switch is in the ON position.
Press and hold the Power button on the back of the
Sound Bar for 5 Seconds.The LED indicators on the front
will flash 3 times.The Subwoofer is now linked with the Sound Bar.
Press and hold the Pairing button on the back of the
Subwoofer for 5 seconds.The LED on the back of the
Subwoofer will begin to blink.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
WALL MOUNTING THE SATELLITE SPEAKERS
1. Attach the Wall Mount Screw to the
back of the Satellite Speaker.
2. Attach the wall mount bracket to the wall.
3. Plug the speaker cable into the back
of the Satellite Speaker.
Wall Mount Screw
(Size: M4 x 8)
4. Align and mount the Satellite Speaker
with the Wall Mount Bracket.
Be sure your screws are attached to wood
studs or drywall anchors (for drywall) or
concrete anchors (for brick/concrete walls).
Wall mounting hardware is not included.
If you are unfamiliar with power tools or the layout of
electrical wiring in the walls of your home, consult a
professional installer.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Do You Have Questions? Find Answers At
SUPPORT.VIZIO.COM
Find help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• Product Updates
• And More
Live Chat
Support Available
You can also contact our
award-winning support team at:
Phone: (877) 878-4946 (TOLL-FREE)
techsupport@VIZIO.com
Email:
Hours Of Operation:
Monday - Friday: 5 am TO 8 pm (pST)
Saturday - Sunday: 7 am TO 4 pm (pST)
Download from Www.Somanuals.com. All Manuals Search And Download.
HELP & TROUBLESHOOTING
• Press the POWER button on the remote control or on the side of your Sound Bar.
• Ensure the power cord is securely connected.
There is no power.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
• Increase the volume.Press Volume Up on the remote control or on the side of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Press INPUT on the remote or on the side of your Sound Bar to select a different input source.
• When using either of the Digital Inputs,if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to
your Blu-ray/other source,some TVs do not pass through digital audio.
There is no sound.
• On digital inputs,the input LEDs will flash rapidly if an unsupported format is present.Set the source to output PCM.
•Your TV may be set to variable audio output.Confirm that the audio output setting is set to FIXED or STANDARD,not
VARIABLE.Consult your TV’s user manual for more detailed information.
• If using Bluetooth,ensure that the volume on your source device is turned up and that the device is not muted.
• Ensure all cables and wires are securely connected.
I hear buzzing or
humming.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may
be with the original device.
• Connect your device to a different input on the Sound Bar.
• Replace the remote batteries with new ones.
The remote
• Point the remote directly at the center of the Sound Bar when pressing a button.
isn’t working.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming
application. (e.g., Pandora doesn’t support the Back button.)
Download from Www.Somanuals.com. All Manuals Search And Download.
31
ONE-YEAR LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90)
days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period,VIZIO will either repair or replace the Product at its sole option
and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: [email protected] or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 8:00PM Monday through
CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period.Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion.Replacement parts
and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return
shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns toVIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection.VIZIOTechnical Support
will provide instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper
operation,improper voltage supply or power surges,signal issues,damages from shipping,acts of God,any type of customer misuse,modifications or adjustments,as well as installation
and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine
maintenance are not covered.This one year limited warranty does not cover Products sold“AS IS”,“FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABIL-
ITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND
DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE
OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL
LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
SPECIFICATIONS
Sound Bar: Two 3”High-Efficiency Full-Range Transducers (Left and Right)
One 3”High-Efficiency Full-Range Transducer (Center)
Two 3”x 6”Bass Radiators
Sound Pressure Level (System): 104 dB
Frequency Response (System): 45 Hz - 20 KHz
Voltage: 120 VAC, 60 Hz
Satellite: One 3”High-Efficiency Full-Range Transducer (Each Satellite)
Inputs: One 3.5mm Stereo Audio
One RCA Stereo Audio
Compliances: UL, C-UL, FCC
One Optical (Toslink)
One Digital Coaxial Audio
One HDMI (ARC on output HDMI)
One USB (Supports .WAV format only)
Bluetooth (Wireless)
Download from Www.Somanuals.com. All Manuals Search And Download.
32
LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference,and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct
such interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves.This device is designed
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set
by the Federal Communications Commission of the U.S.Government.This device complies with FCC
radiation exposure limits set forth for an uncontrolled environment.
license from DTS Licensing Limited. DTS, the Symbol, & DTS and
the Symbol together are registered trademarks, and DTS Digital
Surround is a trademark of DTS, Inc. © DTS, Inc.All Rights Reserved.
IC Statement
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
license from DTS Licensing Limited. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks, and DTS TruVolume is a
trademark of DTS, Inc. © DTS, Inc.All Rights Reserved.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
© 2014 CSR plc and its group companies.
The aptX® mark and the aptX logo are trade marks of CSR plc
between the radiator & your body.
or one of its group companies and may be registered in one or
more jurisdictions.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations. Because this
product contains electronic components and a battery, it must be disposed of separately from
household waste. Contact local authorities to learn about disposal and recycling options.
This product qualifies for ENERGY STAR in the “factory default”
setting and this is the setting in which power savings will be
achieved. Changing the factory default settings or enabling
other features will increase power consumption that could
exceed the limits necessary to qualify for ENERGY STAR rating.
Other:
Image(s) used under license from Shutterstock.com
We want to help you save energy.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
© 2014 VIZIO INC.ALL RIGHTS RESERVED.
140211OC-NC
Download from Www.Somanuals.com. All Manuals Search And Download.
|