MODEL
SB4021M-A1
VIZIO
QUICK
START
GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKAGE CONTENTS
Home Theater Sound Bar
Wireless Subwoofer
Remote Control
with Battery
Power Adapter
for Sound Bar
3.5mm to RCA
Stereo Audio Cable
Wall Mount
Brackets (2)
Wall Mount Template
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1
CONTROLS & CONNECTIONS
Info Display Input
Displays volume, input, Press to change
and other information. input source.
Volume Up/Down
Press to increase
or decrease overall
volume.
Power
Press to turn
on or off.
Power Light
When Sound Bar is
on, this light is on.
Link LED Light
Link Button
Used to re-link the
Subwoofer with the Sound
Bar.
Power Switch
Press to turn on or off.
Power Cord
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Digital Optical In
Digital Coaxial In
Analog 3.5mm In
Wall Mount Posts
USB
1.85
USB
1.85
Power Port
USB Port
Download from Www.Somanuals.com. All Manuals Search And Download.
3
FIRST-TIME SETUP
1
1.85
BETTER
BETTER
GOOD
GOOD
DIGITAL OPTICAL
CABLE*
DIGITAL COAXIAL
CABLE*
3.5MM
CABLE*
3.5MM TO RCA
CABLE
CHOOSE ONE CABLE:
GOOD
BETTER
AND CONNECT IT TO YOUR TV
*Not Included
Download from Www.Somanuals.com. All Manuals Search And Download.
4
USB
Connect the Sound Bar to your TV using
one of the connection types to the left.
Choose the best possible connection
type.
Be sure the TV port is an audio output,
not an audio input.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
1.85
2
3
USB
1.85
4
5
Plug in
Sound Bar
Plug in
Subwoofer
Download from Www.Somanuals.com. All Manuals Search And Download.
6
6
Sound Bar is centered
below the TV, close to ear
level.
Wireless Subwoofer is in the front
corner of the room, up to 60 feet
away from the Sound Bar. Bass is
projected outward.
For the best surround sound experience, position the speakers as shown.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
7
Flip the ON/OFF
Switch to ON.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
8
Power
Turn your TV on, then press the
Power button on the remote to turn
the Sound Bar on.
Press the Input button on the remote
until your connection type is displayed.
Push repeatedly to cycle through
input sources (Analog In, Coaxial In,
Optical In, and USB).
Input
9
Setup is complete.
If there is no sound coming from the Sound Bar or Subwoofer, or if you experience other
issues, turn to page 18 for help and troubleshooting tips.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
USING THE REMOTE
Power
Press to turn on or off.
Play/Pause
Press to play or pause track.
Volume Up
Press to increase overall
system volume.
Rewind/Previous
Press and hold to rewind.
Press to go to last track.
Fast Forward/Next
Press and hold to fast forward.
Press to advance to next track.
Volume Down
Press to decrease overall
system volume.
Mute
Press to turn the sound on or off.
Input
Press to output audio from the
selected device port. Press
repeatedly to cycle through
available inputs.
Menu
Press to display menu options.
SRS TruVolume
SRS TruSurround HD
When on, SRS TruVolume intelligently normalizes volume
fluctuations due to television commercials or channel
changes.
When on, SRS TruSurround HD delivers enveloping,
immersive surround sound, making every seat in the room
the “sweet spot”.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
EXTENDED FUNCTIONS USING BUTTON COMBINATIONS
Mute/Unmute = Volume Up + Volume Down
Press and hold both buttons for 1 second to mute/
unmute your Sound Bar.
+
Factory Reset = Power + Volume Up + Volume Down
Press and hold all 3 buttons for 10 seconds to return
your Sound Bar to its factory default settings.
+
+
THE SOUND BAR INFO DISPLAY
Volume - Increase or decrease volume
SRS TruVolume - Toggle SRS TruVolume on or off
Volume
15
TruVol
ON
Bass Level - Increase or decrease bass level
SRS TruSurround - Toggle SRS TruSurround on or off
Bass
9
TSHD
ON
Treble Level - Increase or decrease treble level
Brightness Level - Increase or decrease brightness level
Treble
9
Bright
10
To conserve energy, after displaying a message for several seconds, the Info Display automatically shuts off.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
WALL MOUNTING THE SOUND BAR
1
Use a phillips-head screwdriver to remove the screws from the Sound Bar stands.
Reinsert the screws for safekeeping. Save the stands for future use.
2
MARK HERE
MARK HERE
Place the included wall mounting template against the wall under your TV.
Mark the locations of the 4 bracket holes using a pencil.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
3
The screws and anchors depicted are not included.
The appropriate screws and anchors will depend on
the material of your wall. Be sure that the screws
and/or anchors you use are securely fastened and
can support the weight of the Sound Bar.
Recommended screw diameter: 4mm
Recommended screw length: 8mm or greater
Attach the brackets to the wall as shown. Gently hang the Sound Bar on the brackets using the
wall mount posts on the back of the Bar.
4
USB
1.85
Use the cable management hooks to route your audio cables to your TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
RE-LINKING THE SUBWOOFER AND SOUND BAR
1
You may need to re-link the Subwoofer to the Sound Bar if there
is no sound coming from the Subwoofer and the orange light on
the rear of the Subwoofer is either blinking or not lit.
2
3
Press and hold the INPUT button on the top of
the Sound Bar for 5 seconds. The Sound Bar
will display Pairing.
Press and hold the LINK button on the back of the
Subwoofer until the Sound Bar displays Paired.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
REPLACING THE REMOTE BATTERY
1
2
Insert a flat-head screwdriver into the slot as
shown. Gently push down on the tab, then press
and pull downward on the battery cover to open.
When replacing an old battery with a new
CR2032, be sure that the + sign on the
battery is facing up. Push the battery cover
until it clicks back into place.
PROGRAMMING YOUR UNIVERSAL REMOTE
Many universal remote controls can be programmed to
control your Sound Bar.
As each universal remote works differently, you should
refer to your remote’s user manual for instructions on
programming.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
ADVANCED SETUP
Connect up to four different devices to the Sound Bar
(devices shown are examples–you can use any device).
To listen to a device, change the input source on the Sound Bar.
USB
1.85
Optical,
Coaxial,
and
3.5mm cables transmit
audio only. If connecting a
video device, you will need a
separate video connection
from the device to your TV.
DIGITAL OPTICAL
DIGITAL COAXIAL
CABLE*
3.5MM
CABLE
USB
THUMB DRIVE™
CABLE*
Game Console
Network Media Player
Tablet/MP3 Player/Laptop
Download from Www.Somanuals.com. All Manuals Search And Download.
16
VIZIO RECOMMENDS
ONE POWERFUL
MOVIE MACHINE
™
3D BLU-RAY PLAYER
WITH WIRELESS INTERNET APPS
The VIZIO 3D Blu-ray™ Player with Wireless Internet Apps delivers breathtaking 3D and 1080p Full HD video performance with up to 7.1
channels of crystal-clear digital surround sound. It’s stylishly slim with an easy slot-load design so there’s no waiting for a tray to eject. Built-
in Wi-Fi delivers easy wireless access to on-demand movies, TV shows, music, and more. It’s all at the push of a button on the enhanced
2-sided remote with full keyboard.*
Download from Www.Somanuals.com. All Manuals Search And Download.
17
TECHNICAL SUPPORT
• Press the POWER button on the remote control or on the top of your Sound Bar.
• Ensure the power cords are securely connected.
There is no power.
• Turn the Subwoofer power switch to ON.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
• To conserve power, the Sound Bar shuts off automatically after 30 minutes if not in use.
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Select a different input source (Analog, Coaxial, or Optical).
• Be sure the audio cable coming from the TV is connected to an audio output, not an audio input.
• If listening to a USB source, be sure the files are in MP3 format.
There is no sound from
the Sound Bar.
• If the lights on the Subwoofer are in a slow blink pattern, you will need to pair the Subwoofer
with the Sound Bar. See Re-Linking the Subwoofer and Sound Bar on page 14.
• Move the Subwoofer closer to the Sound Bar.
• Turn the Subwoofer power switch to ON.
• To conserve power, the Subwoofer will automatically enter a low power state when not in use. It may take up to 10
seconds for the Subwoofer to link after the Sound Bar is turned on.
There is no sound
coming from the
Subwoofer.
• Ensure all cables and wires are securely connected.
I hear buzzing or
humming.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may
be with the original device.
• Connect your device to a different input on the Sound Bar.
• To activate SRS TSHD, press the Menu button on the remote and use the arrow keys to scroll to the TSHD screen to
toggle between on and off.
• To listen to Dolby Digital, your device must be playing content in Dolby Digital format. Dolby Digital is only
available over Digital Coaxial or Digital Optical.
How do I listen to
SRS TruSurround or
Dolby Digital?
I would like to adjust the
sound on the Subwoofer
and Sound Bar.
• Adjust the bass and treble levels using the remote.
• Try enabling/disabling SRS TruSurround.
I want to return my
Sound Bar to factory
settings.
• Press and hold the Power, Volume Up, and Volume Down buttons for 10 seconds to return your Sound Bar to its factory
default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
DO YOU HAVE QUESTIONS?
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
The VIZIO support team is highly trained
and is based in the United States.
We can help with:
•
•
•
•
New Product Setup
Connecting Your Devices
Technical Problems
And More
Phone: (877) 878-4946 (TOLL-FREE)
Email: [email protected]
Hours of operation:
Monday - Friday: 5 AM TO 9 PM (PST)
Saturday - Sunday: 8 AM TO 4 PM (PST)
Download from Www.Somanuals.com. All Manuals Search And Download.
We speak English • Se habla Español • Nous parlons Français
19
ONE-YEAR LIMITED WARRANTY
ON PARTS AND LABOR
Technical Support will provide instructions for packing and shipping the covered
Product to the VIZIO service center.
Limitations and Exclusions
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects
in materials and workmanship for a period of one year of non-commercial usage
and ninety (90) days of commercial use. If a Product covered by this warranty is
determined to be defective within the warranty period, VIZIO will either repair or
replace the Product at its sole option and discretion.
VIZIO’s one-year limited warranty only covers defects in materials and workmanship.
This warranty does not cover, for example: cosmetic damage, normal wear and
tear, improper operation, improper voltage supply or power surges, signal issues,
damages from shipping, acts of God, any type of customer misuse, modifications or
adjustments, as well as installation and set-up issues or any repairs attempted by
anyone other than by a VIZIO authorized service center. Products with unreadable
or removed serial numbers, or requiring routine maintenance are not covered.
This one year limited warranty does not cover Products sold “AS IS”, “FACTORY
RECERTIFIED”, or by a non-authorized reseller.
To obtain warranty service, contact VIZIO Technical Support via email:TechSupport@
VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 6:00AM to 9:00PM
Monday through Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific
SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of purchase in the form
of a purchase receipt or copy thereof is required to show that a Product is within the
warranty period.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED
ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR
ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER
INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS,
WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT
EXCEED THE PURCHASE PRICE OF THE PRODUCT.VIZIO SHALL NOT BE RESPONSIBLE
FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST
REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATIONS OR EXCLUSIONS MAY NOTAPPLYTOYOU.THISWARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS,ANDYOU MAYALSO HAVE OTHER RIGHTS,WHICHVARY
FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement
parts and Products may be new or recertified at VIZIO’s option and sole discretion.
Replacement parts and Products are warranted for the remaining portion of the
original warranty or for ninety (90) days from warranty service or replacement,
whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service.
VIZIO is not responsible for transportation costs to the service center, but VIZIO will
cover return shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE
SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box
and shipping material or packaging that affords an equal degree of protection. VIZIO
SPECIFICATIONS
and
are trademarks of SRS Labs, Inc.
Sound Bar: Two 3” High-Fidelity Drivers
Subwoofer: One 6.5” Long Throw (High Excursion) Driver
Frequency Response
TruSurround HD and TruVolume technologies are incorporated under
license from SRS Labs, Inc.
(Sound Bar): 150 Hz - 18 kHz (+/-5dB)
Frequency Response
(Subwoofer): 40 Hz - 150 Hz (+/-5dB)
Subwoofer Wireless Range: > 60’ with Clear Line of Sight
Sound Pressure Level (SPL): 89 dB 1w-1m
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
Voltage (Sound Bar): 100-240 V, 50-60 Hz
Voltage (Subwoofer): 120V, 60 Hz
This product qualifies for ENERGY STAR in the “factory default”
setting and this is the setting in which power savings will be
achieved. Changing the factory default settings or enabling other
features will increase power consumption that could exceed the
limits necessary to qualify for ENERGY STAR rating.
Dimensions (Sound Bar): 40.1” x 4.1” x 2.1” (with Stand)
40.1” x 3.3” x 2.1” (without Stand)
Dimensions (Subwoofer): 8.5” x 12.8” x 11.0”
Net Weight (Sound Bar): 3.53 lbs (1.6 kg)
Net Weight (Subwoofer): 11.0 lbs (5.0 kg)
Gross Weight: 23.2 lbs (10.5 kg)
Compliances: FCC, NOM, cULus
Download from Www.Somanuals.com. All Manuals Search And Download.
20
LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
unauthorized modification to this equipment. It is the responsibilities of the user to
correct such interference.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This
device is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal Communications Commission of the
U.S. Government. This device complies with FCC radiation exposure limits set forth for
an uncontrolled environment.
IC Statement
Operation is subject to the following two conditions:
1. This device may not cause interference, and
1. Reorient or relocate the receiving antenna.
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Notice:
Disposal and Recycling
1. The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
You must dispose of this product properly, according to local laws and regulations.
Because this product contains electronic components and a battery, it must be
disposed of separately from household waste. Contact local authorities to learn
about disposal and recycling options.
3. The manufacturer is not responsible for any radio or TV interference caused by
INFORMATION ON HEARING DAMAGE
Understanding Noise Induced Hearing Loss
Loud Sounds + Time = Hearing Loss
Exposure to loud sounds can damage your hearing, causing hearing loss and tinnitus
(ringing or buzzing in the ears). While a variety of things can lead to hearing loss,
including aging and side effects of certain medications, the most common cause of
non-age-related hearing damage is loud noise. Extremely loud sounds, such as gun
shots or firecrackers at close range, can cause immediate hearing damage. Hearing
damage can also occur over time due to repeated exposure to loud sounds such as
industrial noise or loud music. With continued exposure to loud noises, ears may
become accustomed to the sound level, which may result in permanent damage to
hearing without any noticeable discomfort.
The more time you spend exposed to loud sounds, the more likely you are to damage
your hearing. All of the loud sounds that you are exposed to during a day add up -
continued exposure to loud sounds can prevent your ears from recovering and also
cause additional damage.
Symptoms of Hearing Loss
While not all noise induced hearing loss is noticeable, symptoms may include
a sensation of pressure or fullness in your ears, ringing in your ears, or muffled
speech. If you experience these symptoms or believe you may have experienced
noise induced hearing loss, you should have your hearing checked by an ear doctor
or audiologist.
Temporary and Permanent Hearing Loss
Noise induced hearing loss and tinnitus may be temporary or permanent. Ears
typically recover from temporary hearing damage in a short time. However, ears may
not recover completely, and some damage may be permanent. Repeated exposure
to loud sound can cause more and more damage, and eventually lead to serious
hearing problems. Scientists generally agree that, over time, exposure to harmful
levels of noise can lead to permanent noise induced hearing loss by damaging and/
or destroying the inner ear’s sensory hair cells.
CARE & MAINTENANCE
Do not use volatile solvents (such as toluene, rosin, or alcohol) to clean this product.
Such chemicals may damage it. Do not spray cleaners directly on the product. To
clean this product, gently wipe it with a clean, dry, soft cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
© 2012 VIZIO INC. ALL RIGHTS RESERVED.
120629OC-NC
Download from Www.Somanuals.com. All Manuals Search And Download.
|