MODEL
VSB202
VIZIO
QUICK
START
GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKAGE CONTENTS
Remote Control
with Battery
High Definition Sound Bar
Stereo RCA to 3.5mm
Audio Cable
Power Adapter w/Cable
This Quick Start Guide
Digital Optical Audio Cable
Cables may vary slightly from those shown.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS & CONNECTIONS
Input
Volume + / -
Press to increase/
decrease system
volume.
Mute
TVOL
Press to change
input source
(Input 1, Input 2).
Press to turn sound
off. Press again to
turn sound on.
Press to turn SRS
TruVolume on or
off.
Power
Press to turn
Sound Bar
on or off.
TSHD
Press to turn SRS
TruSurround or
SRS WOW HD on
or off.
Mute
TVOL
TSHD
Input
Vol -
Vol +
Input
2
Optical
Input
1
24V
Input 2
Optical
Input 1
24V
SPDIF (Digital Optical)
Input 2
(Stereo 3.5mm)
Power Port
Input 1
(Stereo RCA)
Download from Www.Somanuals.com. All Manuals Search And Download.
FIRST-TIME SETUP
1
Input 2
Optical
Input 1
24V
BACK OF SOUND BAR
BETTER - Digital
GOOD - Analog
CHOOSE ONE
Connect the included Optical Cable or
the included Stereo RCA Cable to ONE
TV audio output as shown.
The included 3.5mm to RCA
cable is reversible. You can
connect to either a 3.5mm port
or an RCA port on your TV.
BACK OF YOUR TV*
Download from Www.Somanuals.com. All Manuals Search And Download.
*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
2
24V
Input
2
Optical
Input
1
24V
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Sound Bar is
centered below the
TV.
For the best surround sound experience, position the Sound Bar as shown.*
The Sound Bar should be close to ear level.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Power
Input
Turn your TV on, then press the Power button on
the remote to turn the Sound Bar on.
Press the Input button to switch between audio
sources. For example, if you connected your TV to
Input 1, set the Sound Bar to Input 1.
Setup is complete.
READING THE INDICATOR LIGHTS
Volume (White)
As volume increases,
more lights are displayed.
SRS TruSurround HD (Blue)
When TruSurround HD
is on, light is solid.
Dolby Digital (Blue)
When Dolby Digital
is detected, light is solid.
SRS TruVolume (Blue)
When TruVolume is on, light is solid.
Lights are located here.
SRS WOW HD (Orange)
When WOW HD is on, light is solid.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE
Power
Volume Up
Press to turn on or off.
Press to increase volume.
Input
Volume Down
Press to change input source.
Press to decrease volume.
Mute
Press to mute/unmute.
TSHD
TVOL
Press to activate SRS TruSurround HD
or SRS WOW HD.
Press to activate SRS TruVolume.
Tip: For best results, point the remote
at the right side of the Sound Bar. The
sensor is located there.
If your remote stops responding, you may need
to replace the battery.
To replace the battery, open the battery
compartment as shown, then replace the old
+
battery with a new CR2025. Be sure that the
sign on the battery is facing up.
Download from Www.Somanuals.com. All Manuals Search And Download.
WALL MOUNTING THE SOUND BAR
1
Remove the screw from the Sound
Bar stands and rotate as shown.
26 3/4”
(67.95 cm)
Be sure your screws are attached
to wood studs or drywall anchors
(for drywall) or concrete anchors
(for brick/concrete walls). Wall
mounting hardware is not included.
2
If you are unfamiliar with power tools or the layout of electrical wiring in
the walls of your home, consult a professional installer.
Reattach stands using the
included screw.
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting hardware not included.
HELP & TROUBLESHOOTING
All VIZIO products include FREE lifetime technical support.
The VIZIO support team is highly trained and is based in the United States.
We can help with:
• Product Setup
• Technical Problems
• Warranty Questions
• And More
Hours of operation:
Monday - Friday: 5 AM TO 9 PM (PST)
Saturday - Sunday: 8 AM TO 4 PM (PST)
Phone: (877) 698-4946 (TOLL-FREE)
Email: [email protected]
Web:
• Press the POWER button on the remote control or on the top of your Sound Bar.
• Ensure the power cord is securely connected.
There is no power.
• Ensure the light on the power adapter is glowing green.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
There is no sound.
• Press INPUT on the remote or on the top of your Sound Bar to select a different input source.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or
STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.
• Ensure all cables and wires are securely connected.
I hear buzzing or
humming.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not,
the problem may be with the original device.
• Connect your device to a different input on the Sound Bar.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO RECOMMENDS
ULTIMATE ENTERTAINMENT
Complete your home theater experience! The VIZIO 3D Blu-ray Player with Wireless Internet Apps delivers full
HD video, 7.1 surround sound and has built-in wireless for easy access to online movies, TV, music and more.
• Exceptional Full HD 1080p performance
• Streams movies, music, and more with VIZIO Wireless Internet Apps
• Watch 3D movies or HD
Download from Www.Somanuals.com. All Manuals Search And Download.
AVAILABLE ON VIZIO.COM
THE SIMPLE SOLUTION
Replace up to three remotes with the VIZIO 3 Device Universal
Remote Control. It uses a clever code search mode to find your
device without any manual setup. It’s also fully backlit to help you
find the right buttons in the dark.
• Compatible with 500 Brands
• Compatible with 2500 Devices
• Controls up to 3 devices at once
Download from Www.Somanuals.com. All Manuals Search And Download.
ONE-YEAR LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of
commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: [email protected] or via phone at 877 MY VIZIO (877.698.4946) from 6:00AM to 9:00PM Monday through Friday and
purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts and Products
are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the
customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support will provide
instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper
voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs
attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one year limited
warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL
LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE
DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR
DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
SPECIFICATIONS
Sound Bar: Four 3” High-Efficiency Full-Range
Transducers
Frequency Response (Sound Bar): 80 Hz - 20 KHz
Voltage: 100-240 VAC, 50-60 Hz
Inputs: 1 x SPDIF Audio
1 x RCA Stereo Audio
Dimensions (Sound Bar): 39.75” W x 4.82” H x 4.33” D
Net Weight (Sound Bar): 11.68 lbs
1 x 3.5mm Stereo Audio
Compliances: UL, FCC
Sound Pressure Level: 100 dB
Download from Www.Somanuals.com. All Manuals Search And Download.
LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such
interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
IC Statement
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations.
Because this product contains electronic components and a battery, it must be disposed
of separately from household waste. Contact local authorities to learn about disposal and
recycling options.
SRS TruSurround HD, SRS TruVolume, and SRS WOW HD are
trademarks of SRS Labs, Inc. TruSurround HD, TruVolume, and WOW
HD technologies are incorporated under license from SRS Labs, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2012 VIZIO INC. ALL RIGHTS RESERVED.
120110ST-A
Download from Www.Somanuals.com. All Manuals Search And Download.
|