VIZIO
user manual
Model: E320-B0
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank You for Choosing ViZio
iMPorTanT safeTY insTruCTions
And congratulations on your new VIZIO HDTV.
Your TV is designed and manufactured to operate within defined
design limits. Misuse may result in electric shock or fire.To prevent
your TV from being damaged, the following instructions should
be observed for the installation, use, and maintenance of your
TV. Read the following safety instructions before operating your
TV. Keep these instructions in a safe place for future reference.
To get the most out of your new VIZIO product, read these
instructions before using your product and retain them for future
reference. Be sure to inspect the package contents to ensure
there are no missing or damaged parts.
•
To reduce the risk of electric shock or component
damage, switch off the power before connecting other
components to your TV.
ProduCT regisTraTion
To purchase or inquire about accessories and installation services
toll free at (877) 878-4946.
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
We recommend that you either:
•
•
Complete and mail the enclosed registration card
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
extended Warranties
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
For peace of mind, and to protect your investment beyond the
standard warranty,VIZIO offers on-site extended warranty service
plans. These plans provide additional coverage during the
standard warranty period. To purchase an extended warranty
•
•
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
and a third grounding prong.The wide blade or the third
prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
When reading This Manual
When you see this symbol, please read the
accompanying important warning or notice. It is
intended to alert you to the presence of important
operating instructions.
•
•
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
When you see this symbol, please read the
accompanying helpful tip.
Only use attachments/accessories specified by the
manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
•
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer,or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
or local power company.
•
Do not apply pressure or throw objects at your TV.
This may compromise the integrity of the display.The
manufacturer’s warranty does not cover user abuse or
improper installations.
•
•
Unplug this apparatus during lightning storms or when
unused for long periods of time.
•
•
•
The power cord must be replaced when using different
voltage than the voltage specified. For more information,
contact your dealer.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in
any way, such as when the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been
dropped.
When connected to a power outlet, power is always
flowing into your TV.To totally disconnect power, unplug
the power cord.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of un-isolated, dangerous voltage within the
inside of your TV that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
•
•
Unplug the power cord before cleaning your TV.
When moving your TV from an area of low temperature
to an area of high temperature, condensation may form
in the housing. Wait before turning on your TV to avoid
causing fire, electric shock, or component damage.
•
•
•
Do not overload power strips and extension cords.
Overloading can result in fire or electric shock.
The wall socket should be installed near your TV and
easily accessible.
•
•
A distance of at least three feet should be maintained
between your TV and any heat source, such as a radiator,
heater, oven, amplifier etc. Do not install your TV close to
smoke. Operating your TV close to smoke or moisture may
cause fire or electric shock.
Only power of the marked voltage can be used for your
TV. Any other voltage than the specified voltage may
cause fire or electric shock.
•
•
•
Do not touch the power cord during lightning.To avoid
electric shock, avoid handling the power cord during
electrical storms.
Slots and openings in the back and bottom of the
cabinet are provided for ventilation.To ensure reliable
operation of your TV and to protect it from overheating,
be sure these openings are not blocked or covered. Do
not place your TV in a bookcase or cabinet unless proper
ventilation is provided.
Unplug your TV during a lightning storm or when it will not
be used for long period of time.This will protect your TV
from damage due to power surges.
•
•
Never push any object into the slots and openings on
your TV cabinet. Do not place any objects on the top of
your TV. Doing so could short circuit parts causing a fire
or electric shock. Never spill liquids on your TV.
Do not attempt to repair or service your TV yourself.
Opening or removing the back cover may expose you to
high voltages, electric shock, and other hazards. If repair
is required, contact your dealer and refer all servicing to
qualified service personnel.
Your TV should be operated only from the type of power
source indicated on the label. If you are not sure of the
type of power supplied to your home, consult your dealer
•
WARNING: Keep your TV away from moisture. Do not
expose your TV to rain or moisture. If water penetrates into
Download from Www.Somanuals.com. All Manuals Search And Download.
your TV, unplug the power cord and contact your dealer.
Continuous use in this case may result in fire or electric
shock.
•
•
•
This apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
•
•
Do not use your TV if any abnormality occurs. If any
smoke or odor becomes apparent, unplug the power
cord and contact your dealer immediately. Do not try to
repair your TV yourself.
The mains plug or appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
CAUTION - These servicing instructions are for use by
qualified service personnel only.To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating instructions unless you
are qualified to do so.
Avoid using dropped or damaged appliances. If your
TV is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power
cord immediately and contact your dealer for repair.
Continued use of your TV may cause fire or electric
shock.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated DANGEROUS VOLTAGE within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electrical shock to persons.
h
•
•
•
Do not install your TV in an area with heavy dust or high
humidity. Operating your TV in environments with heavy
dust or high humidity may cause fire or electric shock.
Follow instructions for moving your TV. Ensure that the
power cord and any other cables are unplugged before
moving your TV.
When unplugging your TV, hold the AC/DC power
adapter, not the cord. Pulling on the power cord may
damage the wires inside the cord and cause fire or
electric shock. When your TV will not be used for an
extended period of time, unplug the power cord.
•
•
To reduce risk of electric shock, do not touch the
connector with wet hands.
Insert batteries in accordance with instructions. Incorrect
polarities may cause the batteries to leak which can
damage the remote control or injure the operator. Do not
expose batteries to excessive heat such as sunshine, fire
or the like.
•
If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
Download from Www.Somanuals.com. All Manuals Search And Download.
lightning Protection
TeleVision anTenna ConneCTion
For added protection of the TV during a lightning storm or when
it is left unattended or unused for long periods of time, unplug
the TV from the wall outlet and disconnect the antenna or cable
system.
ProTeCTion
If an outside antenna/satellite dish or cable system is to be
connected to the TV,make sure that the antenna or cable system
is electrically grounded to provide some protection against
voltage surges and static charges.
Power lines
Do not locate the antenna near overhead light or power circuits,
or where it could fall into such power lines or circuits. Remember,
the screen of the coaxial cable is intended to be connected to
earth in the building installation.
Article 810 of the National Electrical Code, ANSI/NFPSA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of the grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Ground Clamp
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode
System
Electric Service Equipment
(NEC ART 250, part H)
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Download from Www.Somanuals.1com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the TV
1
InspecTIng The package conTenTs
InsTallIng The TV
Before installing your new TV, take a moment to inspect the
package contents. Use the images below to ensure nothing is
missing or damaged.
After removing the TV from the box and inspecting the package
contents you can begin installing the TV.Your TV can be installed
in two ways:
•
•
On a flat surface, using the included stand
On a wall, using a VESA-standard wall mount (not
included)
Installing the TV stand
Your TV includes a stand designed to support the weight of the
TV and keep it from falling over.However,the TV can still fall over if:
•
•
•
It is placed on an uneven, unstable, or non-level surface
It is pushed, pulled, or otherwise improperly moved
If an earthquake occurs and the TV is not properly
secured
VIZIO LED HDTV with Stand
OK
2
5
8
0
Remote Control
with Batteries
Quick Start Guide
Power Cord
1 x M4 8mm
Phillips Screw
package conTenTs
TV on sTand
Download from Www.Somanuals.com. All Manuals Search And Download.
1
To install the base:
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult
the information below to find the appropriate mount for your TV
model:
Installing a TV on a wall requires lifting.To prevent
injury or damage to the TV, ask someone to help you.
e320-B0
Screw Size:
Screw Pitch:
M4
0.70mm
12mm
Screw Length:
Hole Pattern:
100mm (V) x 100mm (H)
Be sure the mount you choose is capable of supporting the
weight of the TV. After you have determined that you have the
correct mount for your TV, you can begin the installation.
To install your TV on a wall:
1. Place the TV screen-down on a certain, flat surface.To
prevent scratches or damage to the screen, place the TV on
a soft surface, such as a blanket.
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface.
Be sure the surface is clear of debris that can scratch or
damage the TV.
2. Align the base with the neck and tighten the hex screw into
the base with the included hex wrench.
3. Remove the base by loosening and removing the screws.
3. Move the TV with attached stand into an upright position
and place on a flat, level, and stable surface.
4. Attach your TV and wall mount to the wall, carefully following
the instructions that came with your mount.
4. To ensure proper ventilation, leave at least 1” of space
between the back of the TV and any other objects (walls,
etc).
Use only with a UL-listed wall mount bracket rated for the
weight of this TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Connections
2
USB - Connect USB thumb drive to play photos.
HDMI - Connect HDMI device.
Optical Audio Out - Connect optical/SPDIF audio device, such as
home audio receiver.
Stereo Audio Out - Connect RCA audio device, such as sound bar.
Coaxial - Connect coaxial cable from cable, satellite, or antenna.
Component/Composite - Connect component or composite device.
HDMI - Connect HDMI device.
ReAR PAnel
Download from Www.Somanuals.5com. All Manuals Search And Download.
2
FRont Panel
ReMOTe SenSOR & POWeR InDICATOR
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after
several seconds.To keep the power indicator on as long as the TV is on,
FROnT PAnel
Download from Www.Somanuals.7com. All Manuals Search And Download.
2
Remote ContRol
inPut
PoweR
Change the currently-displayed input.
Turn TV on or off.
menu
exit
Display the on-screen menu.
Close the on-screen menu.
aRRow
ok
OK
Navigate the on-screen menu.
Select the highlighted menu option.
Guide
BaCk
Display the info window.
Go to the previous on-screen menu.
V Button
Open the USB photo viewer.
Volume uP/down
Increase or decrease loudness of
the audio.
Channel uP/down
Change the channel.
mute
2
5
8
0
laSt
Turn the audio off or on.
Return to the channel last viewed.
numBeR Pad
Manually enter a channel.
daSh
Use with number pad to manually
enter a digital sub-channel.
(For example, 18-4 or 18-5.)
wide
Switch the display mode.
ReMOTe COnTROl
Download from Www.Somanuals.8com. All Manuals Search And Download.
2
Replacing the Batteries
1. Remove the battery cover.
2. Insert two batteries into the remote control. Make sure that
the (+) and (-) symbols on the batteries match the (+) and
(-) symbols inside the battery compartment.
3. Replace the battery cover.
Download from Www.Somanuals.9com. All Manuals Search And Download.
Connecting Your Devices
3
ConneCting A DeviCe
Your TV can be used to display output from most devices.
1. Verify that your device has a video port that matches an
available port on the TV (HDMI, Component, etc).
Cable/Satellite Box
DVD/Blu-ray Player
2. Turn the TV and your device off.
3. Connect the appropriate cable (not included) to the TV and
the device.
4. Turn the TV and your device on. Set the TV’s input to match
the connection you used (HDMI, Component, etc).
Game Console
HDMI CABLE
• DIGITAL
• HD VIDEO (1080p)*
• HD AUDIO
BEST
COMPONENT CABLE
• ANALOG
• HD VIDEO (1080i)*
• STEREO AUDIO
BETTER
Coaxial CABLE
• ANALOG
• HD VIDEO (1080i)*
• STEREO AUDIO
BETTER
AV CABLE
• ANALOG
• VIDEO (480i)*
• STEREO AUDIO
GOOD
BACK OF TV
* Maximum Resolution
Download from Www.Somanuals.com. All Manuals Search And Download.
10
3
CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES
AV CABLE
COAXIAL CABLE
AV cables (or Composite cables) are the traditional
way of connecting your devices to your TV. Video
signals are sent over the yellow connector while audio
is sent over the red and white connectors.
Coaxial cables are are the traditional way of
connectiong antennas and cable television signals
to your TV. Coaxial cables carry both audio and video
signals through a single connector.
• Video Resolutions up to 480i
• Analog Connection
• HD Video Resolutions up to 1080i
• Analog Connection
• Audio and Video Signals
• Audio and Video Signals
Coaxial
Y
L
R
GOOD
BETTER
Download from Www.Somanuals.com. All Manuals Search And Download.
11
3
COMPONENT CABLE
HDMI CABLE
Component cables are designed to carry high
definition video signals along with additional
audio connections. Colors are delivered with color
information split up three different ways over three
connectors for video (separated into Red, Blue and
Green signals) and the left and right audio connectors
(Red and White).
HDMI is the intelligent, all-digital interface that delivers
bothdazzlingqualityandunmatchedeaseofuse.HDMI
technology transmits crystal-clear digital video along
with multi-channel surround audio. HDMI-connected
devices have the ability to automatically adjust
themselves for optimal viewing.
• HD Video Resolutions up to 1080i
• Analog Connection
• HD Video Resolutions up to 1080p
• HD Audio
• Audio and Video Signals
• Digital Connection
• Audio and Video Signals
R
L
Pr/Cr Pb/Cb
Y
HDMI
BETTER
BEST
Download from Www.Somanuals.com. All Manuals Search And Download.
12
3
ConneCting An AuDio DeviCe
Your TV can output sound to an audio device, such as a receiver
or sound bar.
1. Verify that your device has a video port that matches an
available port on the TV (HDMI, RCA, etc).
Home Audio Receiver
VIZIO Sound Bar
2. Turn the TV and your audio device off.
3. Connect the appropriate cable (not included) to the TV and
the device.
4. Turn the TV and your device on.
HDMI CABLE
• CFC 2-WAY COMMUNICATION
• 2.0-5.1 DIGITAL AUDIO
• PCM,DTS,DOLY DIGITAL
BEST
OPTICAL/SPDIF CABLE
• PCM STREAM
• DOLBY DIGITAL 5.1 CHANNEL
• DTS 5.1 CHANNEL
BETTER
3.5mm CABLE
• ANALOG STEREO CONNECTION
• 2.0 CHANNEL
GOOD
Download from Www.Somanuals.com. All Manuals Search And Download.
13
3
CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES
RCA CABLE
oPtiCAL/SPDiF CABLe
HDMi CABLe
AV cables (or Composite cables) are the
traditional way of connecting your devices to
your audio device. Audio signals are sent over
the red and white connectors.
Optical/SPDIF cables transmit audio signals as
pulses of light through a cable made of plastic
fibers. Audio signals are digitally transmitted
between devices.
HDMI
technology
transmits
crystal-clear
digital multi-channel surround audio through
a single HDMI cable. Audio Return Channel-
enabled (ARC) TVs allow audio to be sent
over an already connected HDMI cable,
eliminating the need for a separate audio cable.
• CFC 2-way Communication
• Quality Stereo Connection
• 2.0 Channel
• PCM Stream (Lossless)
• Dolby Digital 5.1 Channel
• DTS 5.1 Channel
(Auto setup)
• PCM, DTS, Dolby Digital
• Analog Connection
• Audio Signal Only
• 2.0-5.1 Scaleable Lossless
Digital Audio Connection
• Digital Connection
• Audio Signal Only
• Audio and Video Signals
L
R
Optical/SPDIF
HDMI
GOOD
BETTER
BEST
Download from Www.Somanuals.com. All Manuals Search And Download.
14
3
CONNECTING AN AUDIO DEVICE - ARC
Without HDMI ARC
With HDMI ARC
Built-in Tuner
Built-in Tuner
Your TV
Your TV
With an HDMI ARC setup,the
audio connection between
your TV and Home Audio
Receiver can be removed.
The HDMI cable will transmit
audio signal to and from
your TV with an all-digital
audio/video connection.
Without an HDMI ARC setup,
your TV will transmit audio
signal from the built-in tuner
and VIA apps to your home
audio receiver through a
seperate audio connection.
RCA (Audio)
HDMI
HDMI
Your Home Audio Receiver
Your Home Audio Receiver
HDMI
HDMI
Your Blu-Ray Player
Your Blu-Ray Player
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Completing the First-Time Setup
4
The first time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
4. Use the Arrow buttons on the
remote to highlight how your TV
is receiving signal and press OK.
Before you begin the first-time setup:
Follow the on-screen
instructions to complete the
channel scan.
•
Your TV should be installed and the power cord should
be connected to an electrical outlet.
•
Your devices should be connected.
To complete the first-time setup:
5. When you have finished the channel scan, highlight Exit to
Live TV and press OK.
1. Press the Power/Standby
button on the remote.The TV
powers on and the Setup App
starts.
The First-Time Setup is complete.
INPUT
EXIT
MENU
OK
2. Use the Arrow buttons on the
remote to highlight Home Use
and press OK.
3. Use the Arrow buttons on the
remote to highlight your preferred
language and press OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Using the On-Screen Menu
5
Your TV features an easy-to-use on-screen menu.
NavigatiNg the ON-ScreeN MeNu
To open the on-screen menu, press the MENU button on the
remote.You can also open the on-screen menu by pressing the
VIA button and selecting HDTV Settings from the VIA Dock, then
To open the on-screen menu, press
the MENU button on the remote.
pressing OK.
Use the Arrow buttons to highlight
a menu option, and press the OK
button to select that option.
VIZIO
From this menu, you can:
TV SeTTINGS
Picture
•
•
•
•
•
•
•
•
Adjust the Picture settings
Adjust the Audio settings
Activate the Sleep Timer
Adjust the Tuner settings
Set up Closed Captioning
Name the TV Inputs
Audio
Timers
Tuner
CC
Closed Captions
Devices
While navigating the on-screen menu, you can press
the BACK button at any time to return to the previous
menu screen.The EXIT button will close the
on-screen menu.
System
Guided Setup
Adjust TV Settings
Access the Guided Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
17
5
chaNgiNg the iNput SOurce
chaNgiNg the ScreeN aSpect ratiO
external devices such as DVD players, Blu-ray Players, and video
game consoles can be connected to your TV. To use one of
these devices with your TV, you must first change the input
source in the on-screen menu.
TheTV can display images in five different modes:Normal,Stretch,
Panoramic, Wide, and Zoom. each mode displays the picture
differently.
To change the screen aspect ratio:
To change the input device:
1. Press the WIDE button on the
1. Press the INPUT button on
TV
remote.
Normal
Normal
Stretch
the remote.The input menu is
2. Use the Arrow buttons to
highlight the aspect ratio you
wish to view and press OK.
displayed.
Panoramic
COMP
2. Use the Up/Down Arrow
buttons or the INPUT button
Wide
Wide
• Normal preserves the content’s
original aspect ratio. Since the
4:3 aspect ratio is not large
on the remote to highlight the
input you wish to view and
press OK.The selected input is
displayed.
HDMI-1
Zoom
Zoom
Note: Aspect ratio settings may
vary by Input source.
enough to fill the TV’s screen,
black bars are added to the left
and right of the display image.
HDMI-2
Note: Inputs may vary by TV.
• Stretch expands the display image to fill the screen.
Images may appear wider than intended. If you are
watching widescreen (1.85:1 or 2.35:1) content, black
bars will still appear on the top and bottom of the display
image. This option is only available when the TV is
displaying a 720p/1080i source.
• Panoramic expands the display image to fill the screen.
Images may appear wider than intended. If you are
watching widescreen (1.85:1 or 2.35:1) content, black
bars will still appear on the top and bottom of the display
image. This option is only available when the TV is
displaying a 480i/480p source.
• Wide stretches a 4:3 aspect ratio picture to the edges
of the screen. Since the picture is being stretched, the
display image may appear distorted. If the program
is already formatted for widescreen viewing (1.85:1 or
2.35:1), then black bars will appear on the top and
bottom of the display image.
• Zoom expands images with black bars to fit the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
5
adjuStiNg the picture SettiNgS
Your TV display can be adjusted to suit your preferences and
viewing conditions.
4. Auto Brightness Control automatically adjusts the brightness
of the TV screen according to how bright the surrounding is.
To adjust the sensitivity of the light sensor, use the Up/Down
Arrow buttons on the remote to highlight Auto Brightness
Control.Then use the Left/Right Arrow buttons to select Off,
Low, Medium, or Bright.
To adjust the picture settings:
1. Press the MENU button on the
VIZIO
remote.The on-screen menu is
PICTUre
displayed.
5. To manually change each of the picture settings, use the
Up/Down Arrow buttons on the remote to highlight that
picture setting, then use the Left/Right Arrow buttons to
adjust the setting:
Picture Mode
Standard
Medium
Auto Brightness Control
2. Use the Arrow buttons on the
remote to highlight Picture and
press OK.The PICTUre menu is
displayed.
+
+
+
+
+
+
Backlight
50
50
50
50
0
-
Brightness
-
Contrast
-
• Backlight - Adjusts the LeD brightness to affect the overall
brilliance of the picture. Backlight cannot be adjusted
when starting from some picture modes.
Color
-
3. Use the Arrow buttons on the
remote to highlight Picture
Mode, then use the Left/Right
Arrow buttons to change the
picture mode:
Tint
-
Sharpness
0
-
• Brightness - Adjusts the black level of the picture. When
this setting is too low, the picture may be too dark to
distinguish details. When this setting is too high, the
picture may appear faded or washed out.
Advanced Picture
Professional Picture
Select Picture Mode. Standard picture mode
meets eNerGY STAr® requirements. For
the best picture, use Calibrated mode.To
reduce video delay (lag) when gaming, use
Game mode.
• Standard mode sets the
various picture settings to
values that meet
• Contrast - Adjusts the white level of the picture. When
this setting is too low, the picture may appear dark. When
this setting is too high, the picture may appear faded
or washed out. If the setting is too high or too low, detail
may be difficult to distinguish in dark or bright areas of
the picture.
eNerGY STAr® requirements.
• Calibrated mode sets the
picture settings to values
perfect for watching TV in a
brightly-lit room.
• Color - Adjusts the intensity of the picture colors.
• Tint - Adjusts the hue of the picture.This setting is useful
in adjusting the flesh tones in the picture. If flesh appears
too orange, reduce the level of color before adjusting tint.
• Calibrated Dark mode sets the picture settings to values
perfect for watching TV in a dark room.
• Vivid mode sets the picture settings to values that
• Sharpness - Adjusts the edge sharpness of picture
elements. It can be used to sharpen non-HD (high
definition) content; however, it will not produce detail that
does not otherwise exist.
produce a brighter, more vivid picture.
• Game mode reduces throughput delays and optimizes
the picture settings for displaying game console output.
• Computer mode optimizes the picture settings for
6. When you have finished adjusting the picture settings, press
displaying computer output.
the EXIT button on the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
5
Adjusting the Advanced Picture Settings
To adjust the advanced picture settings:
• Picture Position - Adjust the vertical and horizontal
positions of the picture to ensure the image is centered
and completely fills the screen. Use the Left/Right Arrow
buttons to adjust the horizontal position of the displayed
picture. Use the Up/Down Arrow buttons to adjust the
vertical position of the displayed picture. Press the BACK
button when you are finished.
1. From the PICTUre menu, use
VIZIO
the Arrow buttons to highlight
ADVANCeD PICTUre
More, and then press OK.
Color Temperature
Cool
Medium
On
2. Use the Arrow buttons to
highlight Advanced Picture,
and then press OK. The
ADVANCeD PICTUre menu is
displayed.
Black Detail
Backlight Control
reduce Signal Noise
reduce Block Noise
Picture Position
Picture Size
• Picture Size - Increase or decrease the vertical and
horizontal size of the displayed picture. Use the Left/
Right Arrow buttons to adjust the horizontal size of the
displayed picture. Use the Up/Down Arrow buttons to
adjust the vertical size of the displayed picture. Press the
BACK button when you are finished.
Low
Low
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press the Left/
Right Arrow buttons to change
the setting:
Film Mode
Auto
• Film Mode - Optimizes the picture for watching film.
Select Auto or Off.
• Color Temperature -
4. When you have finished adjusting the Advanced Picture
Adjusts the 'warmness' and
'coolness' of the white areas
of the picture. Select Cool,
Settings, press the EXIT button on the remote.
Normal, or Computer.
• Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select Off, Low, Medium, or
High.
• Backlight Control - Dynamically improves the contrast
ratio of the picture by adjusting the backlight.The
adjustment is controlled by the content on the screen.
Select On or Off.
• Reduce Signal Noise - Diminishes artifacts in the image
caused by the digitizing of image motion content. Select
Off, Low, Medium, or High.
• Reduce Block Noise - reduces pixelation and distortion
for mpeg files. Select Off, Low, Medium, or High.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
5
Adjusting the Professional Picture Settings
Adjusting the Color Tuner Settings
You can adjust the professional HSB color and 11 point white
balance. Test your setting using the SMPTe, Flat, and ramp test
patterns.
You can manage custom picture modes and adjust professional
picture settings such as HSB, rGB offset, rGB gain, and 11 Point
white balance.
To adjust the color tuner settings:
To adjust the professional picture settings:
1. From the PrOFeSSIONAL PICTUre menu, use the Arrow
buttons to highlight Color Tuner, and then press OK. The
Color Tuner menu is displayed.
1. From the PICTUre menu, use
VIZIO
the Arrow buttons to highlight
Professional Picture, and then
press OK.The PrOFeSSIONAL
PICTUre menu is displayed.
PrOFeSSIONAL PICTUre
Color Tuner
Color Tuner
rename Picture Mode
Create Picture Mode
Lock Picture Mode
Delete Picture Mode
red
0
Green
Blue
0
Cyan
Magenta
Yellow
Hue
0
5
0
0
0
0
0
0
25
-2
0
-14
0
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press OK to
change the setting:
Saturation
brightness
Offset
-1
-4
-24
0
-22
0
0
Gain
0
0
• Color Tuner - Adjust the
professional HSB color and
11 point white balance.
2. Use the Arrow buttons on the remote to highlight Hue,
Saturation, Brightness, Offset, or Gain of the color you wish
to adjust. Press the OK button and use the Left/Right Arrow
buttons to adjust the value. When you are finished press the
OK button to save the setting.
• Rename Picture Mode -
rename a custom picture
mode.
• Create Picture Mode -
Create a custom picture
mode.
3. Use the Arrow buttons to highlight another setting you wish
to adjust.
4. When you are finished adjusting the color tuner settings,
• Lock Picture Mode - Lock a
custom picture mode with a
unique passcode.
press the EXIT button.
• Delete Picture Mode - Delete a custom picture mode.
Inputs assigned to that custom picture mode will be set
to Calibrated picture mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
5
To adjust the 11 Point White Balance settings:
To enable/disable the SMPTe Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the 11 Point White Balance menu is displayed.
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the SMPTe Test Pattern menu is displayed.
11 Point White Balance
SMPTe Test Pattern
Gain
5%
red
Green
0
Blue
0
0
Off
2. Use the Arrow buttons on the remote to highlight Off. Use
the Left/Right Arrow buttons to highlight On to enable the
SMPTe Test Pattern.
2. Use the Arrow buttons on the remote to highlight the Gain
and Color values you wish to adjust. Press the OK button
and use the Left/Right Arrow buttons to adjust the value
When you are finished press the OK button to save the
setting.
To disable the SMPTe Test Patter, use the Left/Right Arrow
buttons to highlight Off.
3. When you are finished, press the EXIT button.
3. When you are finished, press the EXIT button.
To enable/disable the Flat Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Flat Test Pattern menu is displayed.
Flat Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to highlight On to enable the Flat
Test Pattern.
To disable the Flat Test Pattern, use the Left/Right Arrow
buttons to highlight Off.
3. When you are finished, press the EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
5
To enable/disable the ramp Test Pattern:
Renaming the Custom Picture Mode
You can rename the custom picture mode from the PICTUre
menu.
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the ramp Test Pattern menu is displayed.
To rename the custom picture mode:
ramp Test Pattern
1. From the PrOFeSSIONAL
VIZIO
PICTUre menu, use the Arrow
reNAMe PICTUre MODe
Off
buttons to highlight Rename
Picture Mode, and then press
Custom1_
OK.The reNAMe PICTUre MODe
menu is displayed.
a
j
s
b c d e
f
g h i
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to highlight On to enable the ramp
Test Pattern.
2. Use the Arrow buttons to enter
a custom name using the
on-screen keyboard.
k
t
l
m n o p q r
u v w x
y
7
z
8
0
9
1
2
3
4
5
6
.@#
.com Space
3. Highlight Save and press OK.
To disable the ramp Test Patter, use the Left/Right Arrow
Save
buttons to highlight Off.
4. Press the EXIT button to exit the
menu screens.
3. When you are finished, press the EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
5
Creating a Custom Picture Mode
Locking a Custom Picture Mode
You can create a custom picture mode.
You can lock the custom picture mode with a unique passcode
to prevent any changes.
To create a custom picture mode:
To lock a custom picture mode:
1. From the PrOFeSSIONAL
PICTUre menu, use the Arrow
buttons to highlight Create
Picture Mode, and then press
VIZIO
1. From the PrOFeSSIONAL
VIZIO
CreATe PICTUre MODe
PICTUre menu, use the Arrow
LOCK PICTUre MODe
buttons to highlight Lock
OK.The CreATe PICTUre MODe
_
Picture Mode, and then press
enter the Picture Control PIN to
OK.The LOCK PICTUre MODe
menu is displayed.
prevent changes.
a
b c d e
f
g h i
menu is displayed.
2. Use the Arrow buttons to enter
a name for your custom picture
mode using the on-screen
keyboard.
j
k
t
l
m n o p q r
_
2. Use the Number Pad on your
s
u v w x
y
7
z
8
0
9
remote to enter a unique 4
digit passcode.
1
2
3
4
5
6
.@#
.com Space
Save
3. Highlight Save and press OK.
3. Press the EXIT button to exit the
menu screens.
4. Press the EXIT button to exit the
menu screens.
enter the 4 digit passcode using the number
buttons on the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
5
Deleting a Custom Picture Mode
You can delete a custom picture mode. Inputs assigned to the
deleted custom will be assigned to the Calibrated picture mode.
To lock a custom picture mode:
1. From the PrOFeSSIONAL
PICTUre menu, use the Arrow
To delete the user created [your picture mode] picture mode,
select the Delete button.
buttons to highlight Delete
Picture Mode, and then press
Delete
Cancel
OK.The DeLeTe PICTUre MODe
window is displayed.
2. Use the Left/Right Arrow buttons to highlight Delete and
press OK.
3. Press the EXIT button to exit the menu screens.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
5
adjuStiNg the audiO SettiNgS
To adjust the audio settings:
• Digital Audio Out - Changes the type of processing for
the Optical and HDMI ArC output when connected to a
home theater audio system. Select PCM or Bitstream.
1. Press the MENU button on the
remote.The on-screen menu is
displayed.
• Analog Audio Out - Sets the volume control properties
for the analog rCA (red/white) connectors when
connected to a home theater audio system. Select
Variable to control the external speakers’ volume from
the TV’s volume controls, or select Fixed to control the
external speakers’ volume from your home theater system
controls.
VIZIO
AUDIO
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK.The AUDIO menu is
displayed.
TV Speakers
On
On
Surround Sound
Balance
+
+
0
-
-
Lip Sync
0
Digital Audio Out
Analog Audio Out
equalizer Settings
reset Audio Mode
PCM
Fixed
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
• Equalizer Settings - Adjusts the boost or attenuation
of different frequencies. Change the audio mode by
selecting Flat, Dynamic, Center, Bass Boost, or Bright.
• Reset Audio Mode - restores the audio settings to the
• TV Speakers - Turns the
built-in speakers on or off.
4. When you have finished adjusting the audio settings, press
• Surround Sound -
the EXIT button on the remote.
Surround sound uses DTS
TruSurround™ to deliver
an immersive surround
sound experience from
the TV’s internal speakers.
TruSurround completes the
entertainment experience
by providing deep, rich
bass and by delivering crisp
details and clear, intelligible
dialog. Select On or Off.
• Balance - Adjusts the loudness of the audio output from
the left and right speakers.
• Lip Sync - Adjusts the synchronization between the
display image and the accompanying audio track.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
5
Resetting the Audio Settings
activatiNg the Sleep tiMer
To reset the audio settings to the factory default settings:
When activated, the TV’s sleep timer will turn the TV off after a set
period of time.
1. Press the MENU button on the remote.The on-screen menu is
displayed.
To use the sleep timer:
2. Use the Arrow buttons on the remote to highlight Audio and
1. Press the MENU button on the
press OK.The Audio menu is displayed.
VIZIO
TIMerS
remote.The on-screen menu is
displayed.
3. Use the Arrow buttons to highlight Reset Audio Mode and
press OK.The TV displays,“Select reset to restore factory
default audio settings.”
Sleep Timer
Off
2. Use the Arrow buttons on the
remote to highlight Timers and
press OK.The Timers menu is
displayed.
Auto Power Off
10 min.
4. Highlight Reset and press OK.
5. Press the EXIT button on the remote.
3. Use the Left/Right Arrow
buttons on the remote to
highlight the period of time
after which you want the TV to
go to sleep: 30, 60, 90, 120, or
180 minutes. If you don’t want
the sleep timer to activate,
change the setting to Off.
4. When you have finished setting
the sleep timer, press the EXIT
button on the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
5
Setting the Auto Power Off Feature
SettiNg up the tuNer
To help save energy, your TV is set by default to turn off after 10
minutes if no signal is being displayed on the screen.This feature
can be deactivated.
You can use the TV’s Tuner menu to:
•
•
•
•
•
•
•
Select a Tuner Input
VIZIO
TUNer
Perform an Auto Channel Scan
Perform a Partial Channel Scan
Manually Add Channels
Select channels to skip
Select Analog MTS modes
Select Digital Languages
To set the Auto Power Off feature:
Tuner Mode
Antenna
1. From the SLeeP TIMer menu, use the Up/Down Arrow buttons
Auto Channel Scan
Partial Channel Search
Add Analog Channel
Skip Channel
on the remote to highlight Auto Power Off.
2. Use the Left/Right Arrow buttons on the remote to change
whether the TV will turn off. If you don’t want the TV to turn off
when there is no signal, change the setting to Off. Otherwise,
select 10 min.
Analog Audio
Stereo
Digital Language
english
3. When you have finished setting the auto power off time,
press the EXIT button on the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
5
Selecting a Tuner Input
Adding New Channels
Select the type of tuner input you will be using.You can select either
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
Occasionally, you may need to add a new range of channels or
add a new analog channel.You can do this by using the Partial
Channel Search and Add Analog Channel options.
1. From the Tuner menu, highlight Tuner Mode and press OK.
The Tuner Mode menu displays.
To add a range of new channels:
2. Highlight Antenna or Cable and press OK. Press EXIT.
1. From the Tuner menu, highlight Partial Channel Search, and
press OK.The PArTIAL CHANNeL SeArCH menu is displayed.
Scanning for Channels
2. Highlight Scan Mode and select the type of channel you
Before the TV can detect and display channels and their
associated information, you must scan for channels. A channel
scan may also be necessary when the TV has been moved to an
area where different free-to-air broadcast television channels are
available.
are adding: Analog, Digital, or Analog Digital.
3. Highlight From Channel and enter the channel where
you want to begin the scan. (Use the Left Arrow button to
backspace. Use the Number Pad on the remote to enter the
channel.)
To perform an Auto Channel Scan:
4. Highlight To Channel and enter the channel where you want
to end the scan. (Use the Left Arrow button to backspace.
Use the Number Pad on the remote to enter the channel.)
1. From the Tuner Settings menu,
highlight Auto Channel Scan,
and press OK.The AUTO
CHANNeL SCAN begins.
VIZIO
AUTO CHANNeL SCAN
5. Highlight Start and press OK.The partial channel search
Channels Found
0: Analog
begins.
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
0: Digital
6. Wait until the partial channel search is 100% complete.
Highlight Done and press OK.
13 % Complete
Cancel
3. Press the EXIT button on the
7. Press the EXIT button on the remote.
remote.
If the channel scan is cancelled,the
channels
that
were
already
discovered are retained. A new
channel scan will clear all channels.
Cancel the channel scan.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
5
To add a single new analog channel:
Skipping Channels
After a channel scan is completed, you may find that some
channels are too weak to watch comfortably.There may also be
some channels you do not want to view. You can remove these
channels from the TV’s memory with the Skip Channel feature.
1. From the Tuner menu, highlight
Add Analog Channel and
press OK.The ADD ANALOG
CHANNeL menu is displayed.
VIZIO
ADD ANALOG CHANNeL
enter Channel #
Add Channel
Channels that have been removed with the Skip
Channel feature can still be viewed if the channel
is entered using the Number Pad. If you wish to
completely block a channel from being viewed, use
the parental controls. See Locking and Unlocking
2. Highlight Enter Channel # and
use the Number Pad on the
remote to enter the number of
the channel you are adding.
3. Highlight Add Channel and
press OK.The TV scans for the
channel.
To remove a channel:
4. When the TV is done scanning
for the channel, press the EXIT
button on the remote.
VIZIO
1. From the Tuner menu, highlight
Skip Channel, and press OK.
The SKIP CHANNeL menu is
displayed.
SKIP CHANNeL
Test 0
Test 1
Test 2
Test 3
Test 4
Test 5
1
1
P
P
1-2
2
2. For each channel you wish
to remove, use the Up/Down
Arrow buttons on the remote
to highlight the channel and
press OK. A P appears to the
right of each channel you
select.
2-2
2-3
P
3. When you have selected all
of the channels you wish to
remove, press the EXIT button
on the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
5
Changing the Audio Language
To use the Digital Language feature:
Some digital free-to-air, cable, and satellite channels broadcast
programs in more than one language. The Analog Audio and
Digital Language features allow you to listen to audio from
Secondary Audio Programming (SAP). SAP allows you to listen to
broadcasts in multiple languages.
1. From the Tuner menu, highlight
Digital Language and press
OK. The DIGITAL LANGUAGe
menu is displayed.
VIZIO
DIGITAL LANGUAGe
english
español
Français
•
•
Analog Audio works with analog channels.
Digital Language works with digital channels.
2. Select your preferred language:
English, Español, or Français.
Press OK.
Not all programs are broadcast in multiple languages.
The Analog Audio and Digital Language features
only works when the program being viewed is being
broadcast in the language you select.
3. Press the EXIT button on the
remote.
To use the Analog Audio feature:
1. From the Tuner menu, highlight
Analog Audio and press OK.
The ANALOG AUDIO menu is
displayed.
VIZIO
ANALOG AUDIO
Stereo
SAP
2. Select Stereo, SAP (secondary
audio programming), or Mono.
Press OK.
Mono
3. Press the EXIT button on the
remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
5
Changing the Appearance of Digital Closed Captions
SettiNg up clOSed captiONiNg
Digital closed captions can be displayed according to your
preference.See the diagram on the next page for an explanation
of the parts of the closed caption area.
Your TV can display closed captions for programs that include
them. Closed captions display a transcription of a program’s
dialogue.
To change the appearance of digital closed captions:
If the program you are viewing is not being broadcast
with closed captions, the TV will not display them.
1. From the CLOSeD CAPTION
VIZIO
DIGITAL CC STYLe
menu, use the Arrow buttons to
highlight Digital CC Style and
press OK.
Caption Style
Text Style
Custom
As Broadcast
As Broadcast
As Broadcast
As Broadcast
As Broadcast
As Broadcast
As Broadcast
As Broadcast
The Closed Captioning menu only appears when the input is an
antenna for Over-the-Air signals, cable TV directly from the wall
(no cable box), or a device with a composite video connection.
2. Use the Left/Right Arrow
buttons on the remote to select
Custom.The DIGITAL CC STYLe
menu appears as shown.
Text Size
Text Color
Text Opacity
To activate or deactivate closed captions:
Background Color
Background Opacity
Window Color
Window Opacity
1. Press the MENU button on the
3. Use the Up/Down Arrow
buttons on the remote to
highlight the setting you wish
to change, then use the Left/
Right Arrow buttons to change
the setting:
VIZIO
CLOSeD CAPTION
remote.The on-screen menu is
displayed.
Captions
Off
CC1
CS1
2. Use the Arrow buttons on the
remote to highlight Closed
Captions and press OK. The
CLOSeD CAPTION menu is
displayed.
Analog closed caption
Digital closed caption
Digital Caption Settings
• Caption Style - Choose
As Broadcast to keep
default settings or Custom
to manually change each
setting.
3. Use the Up/Down Arrow buttons to highlight Captions, then
use the Left/Right Arrow buttons to turn Closed Captions On
or Off.
• Text Style - Change the
font used for the closed
captioning text.
4. Use the Arrow buttons on the remote to highlight the type of
closed captions you wish to see:
• Analog CC for analog (NTSC) TV channels.
• Text Size - Make the text larger or smaller.
• Color - Change the color of the text.
• Digital CC for digital (ATSC) TV channels.
5. After highlighting the type of closed captions you wish to
see, use the Left/Right Arrow buttons on the remote to select
the caption channel you wish to display, then press EXIT.
• Opacity - Change the transparency of the text.
• Background Color - Change the color of the
background directly behind the text.
• Background Opacity - Change the transparency of the
background directly behind the text.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
5
• Window Color - Change the color of the closed
Typical choices include:
captioning box.
•
Transparent background, opaque window—The entire
• Window Opacity - Change the opacity of the closed
window remains filled with color, while the text appears in
it.The area covered by the window stays the same until
the signal from the TV or a device moves it out of the way
of a changing picture.
captioning box
4. When you are satisfied with the appearance of the closed
captions, press the EXIT button on the remote.
•
Opaque background, transparent window—Only a strip
of background appears behind the text.There is no
window to block the picture.
In the example below, the closed caption text is green, the
background is black, and the window is red.
Text
Background (BG)
Closed caption text sample
Window
CLOSED CAPTIONS SCREEN LAyOUT
Download from Www.Somanuals.com. All Manuals Search And Download.
33
5
SettiNg up deviceS
4. If you would like to use a preset
input label, highlight the input
and press OK. Highlight the
input label you want to use
and press OK.
VIZIO
To make it easier to recognize the different devices attached to
the inputs on your TV, you can rename the inputs. For example, if
you have a DVD player connected to the Component input, you
can rename that input to display “DVD Player”.
NAMe DeVICe
HDMI-1
Blu-ray_
TV
To change the name of an input:
a
j
s
1
.@#
b c d e
f
g h i
If you would like to name the
input yourself, highlight the
field below Input Labels. enter
your custom label using the
on-screen keyboard and press
OK.
k
t
l
m n o p q r
VIZIO
DeVICeS
1. Press the MENU button on the
remote.The on-screen menu is
displayed.
u v w x
y
7
z
8
0
9
2
3
4
5
6
HDMI-1
Blu-ray
.com Space
HDMI-2
COMP
2. Use the Up/Down Arrow
buttons on the remote to
highlight Devices and press
OK.The DeVICeS menu is
displayed.
OK
5. When you have finished
naming your input, press the
Cancel
EXIT button on the remote.
Select the input you would like to
name.
3. Use the Up/Down Arrow
buttons on the remote to
highlight the Input you wish to
name and press OK.The NAMe
DeVICe menu is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
5
Viewing System Information
chaNgiNg the tv SettiNgS
To display a summary of the TV settings:
Using the settings menu, you can:
1. Press the MENU button on the remote.The on-screen menu is
VIZIO
SYSTeM
•
•
•
View system information
Set up parental controls
displayed.
System Info
2. Use the Arrow buttons on the remote to highlight System
Change the on-screen
menu language
Menu Language
Time & Local Settings
Parental Controls
CeC
english
and press OK.The System menu is displayed.
3. Highlight System Info and press OK.
•
•
•
Set the time
Adjust the CeC settings
4. Use the Up/Down Arrow buttons to scroll through the system
Power Indicator
reset & Admin
Off
information.
Adjust when the power
indicator is illuminated
5. When you are finished reviewing the system information,
•
reset the TV settings & set
up administrative controls
press the EXIT button on the remote.
View status information for the TV,
remote, current input and your
network.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
5
Using the Parental Controls
Enabling or Disabling Program Ratings
The TV’s parental controls allow you to prevent the TV from
displaying certain channels or programs without a password.
To manage program content according to its rating, you must
enable the Program rating feature.
The Parental Controls menu only appears when:
To enable or disable the Program rating feature:
•
You are using an the tuner receive your TV signals, such
as when you are using an antenna for Over-the-Air
signals or when connected to cable TV directly from the
wall (no cable box).
1. From the Parental Controls menu, highlight Rating Enable
and press OK.The rATING eNABLe menu is displayed.
2. Select On or Off and press OK.
•
You have a device connected using a composite video
cable or a coaxial cable, such as a VCr, satellite or
cable box, or DVr.
Locking and Unlocking Channels
When a channel is locked, it will be inaccessible. Locking
a channel is a good way to prevent children from viewing
inappropriate material.
Accessing the Parental Controls Menu
To access the Parental Controls menu:
To lock or unlock a channel:
1. Press the MENU button on the remote.The on-screen menu is
1. From the Parental Controls menu, highlight Channel Locks
displayed.
and press OK.The CHANNeL LOCKS menu is displayed.
2. Use the Arrow buttons on the remote to highlight System
2. Highlight the channel you want to lock or unlock and press
and press OK.The SYSTeM menu is displayed.
OK.
3. Use the Arrow buttons on the remote to highlight Parental
3. When a channel is locked, the Lock icon appears locked.
The channel is not accessible unless the parental passcode
is entered.
Controls and press OK.
4. enter your parental passcode. If you have not set a
passcode, enter the default, 0000.The Parental Controls
menu is displayed.
4. When a channel is unlocked, the Lock icon appears
unlocked.The channel is accessible.
To set a custom parental passcode, see Changing
Download from Www.Somanuals.com. All Manuals Search And Download.
36
5
Blocking and Unblocking Content by Rating
Changing the Parental Control Passcode
A channel may sometimes broadcast programs that are meant
for children, and at other times broadcast programs that are
meant for mature audiences. You may not want to block the
channel completely using a channel lock, but you may wish to
block certain programs from being viewed.
If you use the parental controls,you should change the passcode
to prevent children from accessing inappropriate material.
To change the parental control passcode:
1. From the Parental Controls menu, highlight Change PIN and
When this is the case, you can use the TV’s rating Block feature
to block content based on its rating.
press OK.The CHANGe PIN menu is displayed.
2. In the New PIN field, use the Number Pad on the remote to
enter your new 4-digit parental control passcode.
For a list of content ratings and their definitions, visit
3. In the Confirm PIN field, use the Number Pad on the remote
to re-enter your new 4-digit parental control passcode.
To block or unblock content by its rating:
4. Write down your new parental control passcode and save it
in a secure location.
1. From the Parental Controls menu, highlight the content type
you want to adjust and press OK:
5. Press the EXIT button on the remote.
USA - TV - USA television program broadcasts.
Resetting the Content Locks
USA - Movie - USA movie broadcasts.
CAN - English - Canadian english television program
To reset the content locks to the factory-default settings:
broadcasts.
1. From the PAreNTAL CONTrOLS menu, highlight RESET LOCKS
and press OK.The TV displays,“Are you sure you want to
reSeT ALL LOCKS SeTTINGS to the factory defaults?”
CAN - French - Canadian French television program
broadcasts.
2. For each rating type you want to block or unblock, use the
Up/Down and Left/Right Arrow buttons on the remote to
highlight the rating type and press OK.
2. Highlight yes and press OK.
3. When the rating type is blocked, the Lock icon appears
locked. Content with this rating and all higher ratings
cannot be viewed.
4. When the rating type is unblocked, the Lock icon appears
unlocked. Content with this rating and all lower ratings can
be viewed.
If you want to block all unrated content, highlight Block
Unrated Shows and use the Arrow buttons on the remote to
select On.
5. When you are finished adjusting the rating level blocks, press
the EXIT button on the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
5
Changing the On-Screen Menu Language
Setting the Time Zone
Your TV can display the on-screen menu in different languages.
To ensure the correct time is displayed when you press the INFO
button, set the TV’s time zone:
To change the on-screen menu language:
1. Press the MENU button on the
1. Press the MENU button on the
remote.The on-screen menu is
displayed.
VIZIO
TIMe ZONe
VIZIO
MeNU LANGUAGe
remote.The on-screen menu is
displayed.
Alaska
2. Use the Arrow buttons on the
english
español
Français
Hawaii
remote to highlight System and
2. Use the Arrow buttons on the
remote to highlight System and
press OK.The SYSTeM menu is
displayed.
Pacific
press OK.The SYSTeM menu is
displayed.
Mountain
Central
3. Use the Arrow buttons on the
eastern
remote to highlight Time and
3. Use the Arrow buttons on the
remote to highlight Menu
Language and press OK. The
MeNU LANGUAGe menu is
displayed.
Atlantic
Local Settings and press OK.
Newfoundland
The TIMe & LOCAL SeTTINGS
Indiana
menu is displayed.
Arizona
4. Highlight Time Zone and press
OK.The TIMe ZONe menu is
4. Highlight your preferred
language (English, Español, or
Français) and press OK.
displayed.
5. Highlight your time zone and
press OK.
5. Press the EXIT button on the
6. Highlight Daylight Saving and
press OK.The DAYLIGHT SAVING
menu is displayed. Choose On
if your locale observes daylight
savings time, or Off if it does
not.
remote.
7. Highlight Postal Code. enter your postal (ZIP) code using
the keypad on the remote, then press OK. Postal codes are
often used by V.I.A. Plus Apps to give you the most accurate
location-based information, such as weather or news.
8. Press the EXIT button on the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
5
Adjusting the CEC Settings
Turning the Power Indicator On or Off
The CeC function on your TV enables you to control
HDMI-connected devices with the included remote without any
additional programming.
The Power Indicator on the front of your TV normally does not
glow when the TV is on.You can change this setting if you prefer
the light to be on.
To turn the Power Indicator Light on or off:
Not all HDMI devices support CeC. See your device’s
user manual for details.
1. Press the MENU button on the remote.The on-screen menu is
displayed.
To enable, disable, or adjust CeC settings:
2. Use the Arrow buttons on the remote to highlight System
and press OK.The System menu is displayed.
1. Press the MENU button on the remote.The on-screen menu is
3. Highlight Power Indicator and press OK.
displayed.
4. Use the Up/Down Arrow buttons to select On or Off, then
2. Use the Arrow buttons on the remote to highlight System
press OK.
and press OK.The SYSTeM menu is displayed.
3. Use the Arrow buttons on the remote to highlight CEC and
press OK.The CeC menu is displayed.
4. Use the Arrow and OK buttons to adjust each setting:
• CEC Function - To use CeC, you must select Enable.
• System Audio Control - When system audio control is on,
you can control your device’s audio using the TV’s remote
control.
• Device Discovery - Use this function to determine if your
device is connected and supports CeC.
5. Press the EXIT button on the remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
5
Restoring the TV to Factory Default Settings
uSiNg the reSet & adMiN MeNu
All of the on-screen menu settings can be reset to the factory
defaults.
You can use the TV’s reset & Admin menu to:
•
restore the TV to its factory
default settings
VIZIO
If you restore the TV to the factory default settings, all
changes you have made to the settings will be lost!
reSeT & ADMIN
•
Start the Store Demo
reset TV to Factory Defaults
This includes any V.I.A. Plus Apps that you have added
and any changes you have made to the settings for
those Apps.
Store Demo
To restore the TV to its factory default settings:
1. Press the MENU button on the remote.The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System
and press OK.The System menu is displayed.
3. Highlight Reset & Admin and press OK.The reset & Admin
menu is displayed.
4. Highlight Reset TV to Factory Defaults and press OK.
5. enter your parental control passcode. If you have not yet set
up a parental passcode, enter the default, 0000.
The TV displays,“Select reset to restore all TV settings to
factory defaults and clear all account information.”
6. Highlight Reset and press OK.
7. Wait for the TV to turn off.The TV will turn back on shortly
afterward and the Setup App will begin.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
5
uSiNg the guided Setup MeNu
Using Guided Setup
The TV’s Setup App can be used to easily set up the TV tuner or
to connect the TV with your network.
To use guided setup:
1. Press the MENU button on the
VIZIO
remote.The on-screen menu is
displayed.
GUIDeD SeTUP
Tuner Setup
2. Highlight Guided Setup and
press OK.
3. Highlight the guided setup you
want to use and press OK:
• Tuner Setup - Set up the TV
tuner.
4. Follow the on-screen
instructions. When finished,
press the EXIT button on the
remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
5
uSiNg the iNfO WiNdOW
The Info Window can be displayed by pressing the INFO or GUIDE
button on the remote:
•
•
Press the INFO or GUIDE button one time to display
channel, input, and display information.
Press the INFO or GUIDE button two times to display the
program title, program rating, audio information, and the
start and end times of the program.
Channel/Input Information
28-1
KCeT-HD
1080p
6:15pm
Normal
Dolby Digital+ Stereo
11:00AM - 12:00PM
CC-OFF
TV-PG (V)
Oliver’s Holiday Surprise
Oliver wakes up one morning only to discover that his pals are missing. In this hour-
long holiday special, Oliver goes on a journey in search of his pals. Who knows what
he’ll encounter on the way?
Program Title/CC Information
Program Description
DIGITAL EPISODE GUIDE & INFO WINDOW
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Using the USB Media Player
6
Playing USB Media
USing the USB Media Player
To play USB media, you must first save your images onto a USB
thumb drive.
The USB Media Player allows you to connect a USB thumb drive to
your TV and view photos.
Remember:
•
•
The USB thumb drive must be formatted as FAT32.
Files on the USB thumb drive must end in a supported file
extension (.jpg).
To play your USB media:
1. Connect your USB thumb drive to the USB port on the side of
the TV.
2. Highlight the Media app and press OK.The Media App
launches.
3. Highlight your USB device in the list and press OK.
4. Highlight the type of media you wish to display: Photo.
Press OK.
5. Use the arrow buttons to highlight the file you want to
USB PORT
display. Press OK.The file plays.
Connecting a USB thumb drive to the tV
You can display your photos in fullscreen. Select the
photo, press OK, then highlight Fullscreen and press
OK.
1. Turn the TV off. Connect your USB thumb drive to the USB port
on the back of the TV.
2. Press the Power/Standby button on the remote or touch the
Power control on the side of the TV to turn it on.
Do not remove the USB thumb drive while the TV is on.
Doing so may damage the drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
6
Folder Contents
Back Button
This area displays the
Highlight this button
and press OK if you
would like to return to
the previous screen.
Back Button
contents of the currently
selected folder.You can
browse between files using
the arrow and OK buttons
on the remote.
Highlight and press OK to return to left column.
Connected
Sources
Displays
Current Folder
Displays the folder path.
connected
USB devices.To
change source,
highlight it and
press OK.
VIZIO
Photo
USB1:
VIZIO_2GB\Photo\root
Current Folder
root
A.jpg
D.jpg
B.jpg
E.jpg
C.jpg
F.jpg
Start Fullscreen
Slideshow
Start Slideshow
Sort by name
Sort:
Name A-Z
Thumbnails
Settings
View thumbnails/list
View Folder Settings
View:
File Name: D 1920x1080
Resolution: 1920x1080
Size:
1607270KB
H.jpg
I.jpg
G.jpg
Page 1 of 1
Photo infomation
Page information
Displays name,
resolution, and file
size for currently
selected photo.
If your USB thumb drive has more
files than can be displayed on
a single screen, you can move
between pages by highlighting this
area and pressing left/right arrow.
PhOtO VieWer
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Troubleshooting & Technical Support
A
do you have questions?
Let us heLP!
youR PRoduCt inCLudes FRee LiFetiMe teCh suPPoRt
the viZio support team is highly trained
and is based in the united states.
We can help with:
• new Product setup
• Connecting your devices
• technical Problems
• and More
Phone: (877) 878-4946 (toLL-FRee)
email: techsupport@viZio.com
Web:
hours of operation:
Monday - Friday: 5 aM to 8 PM (Pst)
saturday - sunday: 7 aM to 4 PM (Pst)
We speak English • Se habla Español • Nous parlons Français
Download from Www.Somanuals.com. All Manuals Search And Download.
45
A
The TV displays “No Signal.”
There is no sound.
•
Press the INPUT button on the remote control to select a
•
•
Press Volume Up on the remote control.
different input source.
Press the MUTE button on the remote to ensure mute is
off.
•
if you are using cable tv, satellite, or antenna
connected directly to the tv, scan for channels. see
•
on.
There is no power.
•
•
ensure no headphones are connected to the tv.
•
•
•
ensure the tv is plugged into a working electrical outlet.
Check the audio connections of external devices
(Blu-ray player, game console, cable/satellite box) that
are connected to the tv.
ensure the power cable is securely attached to the tv.
Press the Power/Standby button on the remote or on
the side of the tv to turn the tv on.
•
if you are using an antenna, the signal strength of the
channel may be low. ensure your antenna is connected
securely to the tv and move the antenna around the
room or close to a window for the best signal.
The power is on, but there is no image on the screen.
•
•
ensure all cables are securely attached to the tv.
The colors on the TV don’t look right.
ensure all devices are connected correctly. devices
differ; see your device’s user manual for details.
•
adust the Color and tint settings in the Picture menu.
•
•
•
Check all cables to ensure they are securely attached.
Press the INPUT button on the remote to select a
different input source.
The buttons on the remote aren’t working.
•
•
ensure you are only pressing one button at a time.
Point the remote directly at the tv when pressing a
button.
•
Replace the remote batteries with new ones. see
Download from Www.Somanuals.com. All Manuals Search And Download.
46
A
The image quality is not good.
I see “noise” or static on the screen.
•
For the best image quality, view high-definition
programs using digital sources. Connect your devices
with hdMi cables.
•
When your tv’s digital capabilities exceed a
digital broadcast signal, the signal is up-converted
(improved) to match your tv’s display capabilities.this
up-converting can sometimes cause irregularities in the
image.
•
if you are using an antenna, the signal strength of the
channel may be low. ensure your antenna is connected
securely to the tv and move the antenna around the
room or close to a window for the best signal.
•
if you are using an antenna, the signal strength of the
channel may be low. ensure your antenna is connected
securely to the tv and move the antenna around the
room or close to a window for the best signal.
The picture is distorted.
•
nearby electrical devices may be interfering with the
tv. separate the tv from electrical appliances, cars, or
When I change input source, the volume changes.
fluorescent lights.
•
the tv remembers the volume level on each input
source. if the volume level on the new input source is
higher or lower than the level on the source you switch
from, the difference may be noticeable.
•
ensure all cables are securely attached.
The display image does not cover the entire screen.
•
use the Volume Up/Down buttons on the remote to
adjust the volume.
•
if you are in RGB mode (computer), ensure that h-size
and v-Position in the on-screen menu are set correctly.
•
if you are using tv, av, or Component with 480i input,
press the WIDE button on the remote to change the
screen mode.
When I change input source, the display image changes size.
•
the tv remembers the viewing mode on each input
source. if the viewing mode on the new input source
differs from the one on the input source you switch from,
the difference may be noticeable.
The TV has pixels (dots) that are always dark or always lit.
•
your hdtv is precision-manufactured using an extremely
high level of technology. however, sometimes pixels may
not display correctly.these types of occurrences are
inherent to this type of product and do not constitute a
defective product.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Specifications
B
E320-B0
32” Class
31.50”
Screen Size:
Viewable Area:
Dimensions w/ Stand:
w/o Stand:
28.43” x 18.55” x 6.87”
28.43” x 16.83” x 2.48”
Weight w/ Stand:
w/o Stand:
9.92 lbs
9.26 lbs
TV Type:
Refresh Rate:
DLED
60 Hz
Maximum Resolution:
1366 x 768
Pixel Pitch:
Response Time:
Brightness:
.510 mm x .510 mm
7 ms
300 nits
Viewing Angle:
HDMI Inputs:
176° (H) / 176° (V)
2
Component Video Inputs:
Composite Inputs:
1
1 (Shared with Component)
RF Antenna Input:
USB 2.0 Ports:
1
1
Stereo RCA Output,
Optical Digital
Audio Outputs:
Download from Www.Somanuals.com. All Manuals Search And Download.
48
B
E320-B0
OSD Language:
English, Spanish, French
Ambient Light Sensor:
Remote Control Model:
Yes
XRT020
CSA, CSA-US, FCC Class B,
HDMI, Dolby digital
Certifications:
Compliance:
Energy Star
Voltage Range:
Power Consumption:
Standby Power:
108~132V @ 50/60 Hz
29.8W
<1W
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Limited Warranty
C
ON PARTS AND LABOR
otherthanbyaVIZIOauthorizedservicecenter.Productswithunreadable
or removed serial numbers, or requiring routine maintenance are not
covered. This one year limited warranty does not cover Products sold
“AS IS”,“FACTORY RECERTIFIED”, or by a non-authorized reseller.
Covers units purchased as new in United States and Puerto Rico Only.
VIZIO provides a warranty to the original purchaser of a new Product
against defects in materials and workmanship for a period of one (1)
year of non-commercial usage and ninety (90) days of commercial
use. If a Product covered by this warranty is determined to be defective
within the warranty period,VIZIO will either repair or replace the Product
at its sole option and discretion.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR
DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET
FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND
DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDINGVIZIO’S
NEGLIGENCE,ALLEGED DAMAGE, OR DEFECTIVE GOODS,WHETHER SUCH
DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE PRODUCT.VIZIO SHALL NOT BE RESPONSIBLE FOR
LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST
REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE.THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
To obtain warranty service, contact VIZIO Technical Support via e-mail:
[email protected] or via phone at 877 MY VIZIO (877.698.4946)
from 5:00AM to 9:00PM Monday through Friday and 8:00AM to
PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT
TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase
receipt or copy thereof is required to show that a Product is within the
warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period.
Replacement parts and Products may be new or recertified at VIZIO’s
option and sole discretion. Replacement parts and Products are
warranted for the remaining portion of the original warranty or for ninety
(90) days from warranty service or replacement, whichever is greater.
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
Personal Data
Type of Service
If your VIZIO product is capable of storing personal data and other
information, ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE
COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this
occurs, your product will be restored to you configured as originally
purchased.You will be responsible for restoring all applicable data and
passwords.Recovery and reinstallation of user data is not covered under
this Limited Warranty.In order to protect your personal information,VIZIO
recommends that you always clear all personal information from the
unit before it is serviced, regardless of the servicer.
Defective Products must be sent to a VIZIO service center to obtain
warranty service. VIZIO is not responsible for transportation costs to
the service center, but VIZIO will cover return shipping to the customer.
PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A
VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original
carton box and shipping material or packaging that affords an equal
degree of protection.VIZIOTechnical Support will provide instructions for
packing and shipping the covered Product to the VIZIO service center.
Zero Bright Pixel Defect Guarantee
This policy covers“zero bright pixel”defects for the duration of the limited
“ONE YEAR WARRANTY” on select new product purchases.To determine
if this guarantee applies to your product, refer to the “DETAILS” tab of
“zero bright pixel” guarantee on the box.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and
workmanship. This warranty does not cover, for example: cosmetic
damage, normal wear and tear, improper operation, improper voltage
supply or power surges, signal issues, damages from shipping, acts of
God,any type of customer misuse,modifications or adjustments,as well
as installation and set-up issues or any repairs attempted by anyone
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Legal & Compliance
D
FCC Class B Radio Interference Statement
NOTE:This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Notice
1. The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used
in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modification to this
equipment. It is the responsibilities of the user to correct such
interference.
FCC warning
Changes or modifications not expressly approved by the party responsible
for compliance with the FCC Rules could void the user’s authority to operate
this equipment.
Other
Image(s) used under license from Shutterstock.com
Download from Www.Somanuals.com. All Manuals Search And Download.
51
© 2013 VIZIO INC.All rIghts reserVed.
130912OC-NC
Download from Www.Somanuals.com. All Manuals Search And Download.
|