Vivitek Home Theater System H118x User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright  
This publication, including all photographs, illustrations and software, is protected under international  
copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may  
be reproduced without written consent of the author.  
© Copyright 2013  
Disclaimer  
The information in this document is subject to change without notice. The manufacturer makes no  
representations or warranties with respect to the contents hereof and specifically disclaims any implied  
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to  
revise this publication and to make changes from time to time in the content hereof without obligation of  
the manufacturer to notify any person of such revision or changes.  
Trademark Recognition  
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations  
and pending applications in other countries throughout the world.  
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC in the United States and other countries.  
is a trademark of SRS Labs, Inc. WOW technology is incorporated under license from  
SRS Labs, Inc.  
WOW® significantly improves the playback quality of audio, delivering a dynamic 3D  
entertainment experience with deep rich bass.  
All other product names used in this manual are the properties of their respective owners and are  
acknowledged.  
i —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
Important Safety Information  
Important:  
It is strongly recommended that you read this section carefully before using the projector. These  
safety and usage instructions will ensure that you enjoy many years of safe use of the projector.  
Keep this manual for future reference.  
Symbols Used  
Warning symbols are used on the unit and in this manual to alert you of hazardous situations.  
The following styles are used in this manual to alert you to important information.  
Note:  
Provides additional information on the topic at hand.  
Important:  
Provides additional information that should not be overlooked.  
Caution:  
Alerts you to situations that may damage the unit.  
Warning:  
Alerts you to situations that may damage the unit, create a hazardous environment, or cause  
personal injury.  
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this  
example:  
“Push the Menu button on the remote control to open the Main menu.”  
General Safety Information  
¾
Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in  
the unit. For servicing, contact qualified service personnel.  
¾
¾
Follow all warnings and cautions in this manual and on the unit case.  
The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the  
lens when the lamp is on.  
¾
¾
¾
Do not place the unit on an unstable surface, cart, or stand.  
Avoid using the system near water, in direct sunlight, or near a heating device.  
Do not place heavy objects such as books or bags on the unit.  
ii —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
Projector Installation Notice  
¾ Place the projector in a horizontal position  
The tilt angle of the projector should not exceed 15 degrees, nor should the projector be  
installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease  
dramatically, and may lead to other unpredictable damages.  
¾
Allow at least 50 cm clearance around the exhaust vent.  
¾
¾
Ensure that the intake vents do not recycle hot air from the exhaust vent.  
When operating the projector in an enclosed space, ensure that the surrounding air temperature  
within the enclosure does not exceed operation temperature while the projector is running, and the  
air intake and exhaust vents are unobstructed.  
¾
All enclosures should pass a certified thermal evaluation to ensure that the projector does not  
recycle exhaust air, as this may cause the device to shutdown even if the enclosure temperature is  
with the acceptable operation temperature range.  
iii –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
Verify Installation Location  
¾
To supply power, the 3-blade (with earthing lead) socket should be used to ensure proper  
grounding and equalized ground potential for all of the equipment in the Projector System.  
¾
The power code provided with the Projector should be used. In case of any missing item, other  
qualified 3-blade (with earthing lead) power cord can be used as substitution; however, do not use  
2-blade power cord.  
¾
¾
Verify if the voltage is stable, grounded properly and there is no electricity leakage.  
Measure total power consumption which should not higher the safety capacity and avoid safety  
issue and short circuit.  
¾
¾
¾
¾
¾
¾
Turn on Altitude Mode when located in high altitude areas  
The projector can only be installed upright or inverted.  
When installation the bracket, make sure the weight limit is not exceed and firmly secured.  
Avoid installing near air conditioner duct or subwoofer.  
Avoid installing at high temperature, insufficient cooling and heavy dust locations.  
Keep your product away from fluorescent lamps to avoid malfunction  
caused by IR interference  
¾
¾
The VGA IN connector should be connected to the VGA IN port. Note that it should be inserted  
tightly, with the screws on both sides securely fastened to ensure proper connection of the signal  
wire for achieving optimal display effect.  
The AUDIO IN connector should be connected to the AUDIO IN port and CANNOT be connected  
to AUDIO OUT or other ports like BNC, RCA; otherwise, it will lead to mute output and even  
DAMAGE the port.  
¾
¾
Install the projector above 200cm to avoid damage.  
The power cord and signal cable should be connected before power on the projector. During the  
projector starting and operating process, DO NOT insert or remove the signal cable or the power  
cord to avoid damaging the projector.  
Cooling notes  
Air outlet  
¾
¾
¾
Make sure the air outlet is 50cm clear of any obstruction to ensure proper cooling.  
Air outlet location should not be in front of the lens of other projector to avoid causing illusions.  
Keep the outlet at least 100cm away from the inlets of other projectors  
¾
The projector generates a massive amount of heat during use. The internal fan dissipates the heat  
of the projector when shutting down, and such process may continue for a certain period. After the  
project enters STANDBY MODE status, press the AC power button to turn off the projector and  
remove the power cord. DO NOT remove the power cord during the shutdown process, as it may  
cause damage to the projector. In the meantime, the delayed heat radiating will also affect the  
service life of the projector. The shutdown process may vary depending on the model used.  
Whatever the case may be, be sure to disconnect the power cord till after the projector enters the  
STANDBY status.  
Air inlet  
¾
¾
¾
Make sure there is no object blocking air input within 30 cm.  
Keep the inlet away from other heat sources  
Avoided heavy dust area  
iv —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
Power Safety  
¾
¾
Only use the supplied power cord.  
Do not place anything on the power cord. Place the power cord where it will not be in the way of  
foot traffic.  
¾
Remove the batteries from the remote control when storing or not in use for a prolonged period.  
Replacing the Lamp  
Replacing the lamp can be hazardous if done incorrectly. See Replacing the Projection Lamp on page 35  
for clear and safe instructions for this procedure. Before replacing the lamp:  
¾
¾
Unplug the power cord.  
Allow the lamp to cool for about one hour.  
Caution:  
In rare cases the lamp bulb may burn out during normal operation and cause glass dust or shards  
to be discharged outward from the rear exhaust vent.  
Do not inhale or do not touch glass dust or shards. Doing so could result in injury.  
Always keep your face away from the exhaust vent so that you do not suffer from the gas and  
broken shards of the lamp.  
Cleaning the Projector  
¾
¾
Unplug the power cord before cleaning. See Cleaning the Projector page 38.  
Allow the lamp to cool for about one hour.  
Regulatory Warnings  
Before installing and using the projector, read the regulatory notices in the Regulatory Compliance on  
page 50.  
Important Recycle Instructions:  
Hg  
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that  
can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal  
Laws. For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp  
specific disposal information check WWW.LAMPRECYCLE.ORG.  
Symbol Explanations  
DISPOSAL: Do not use household or municipal waste collection services for  
disposal of electrical and electronic equipment. EU countries require the use  
of separate recycling collection services.  
v –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
Main Features  
Lightweight unit, easy to pack away and transport.  
Compatible with all major video standards including NTSC, PAL, and SECAM.  
A high brightness rating allows for presentations in daylight or in lit rooms.  
Supports resolutions up to UXGA at 16.7 million colors to deliver crisp, clear images.  
Flexible setup allows for front, rear projections.  
Line-of-vision projections remain square, with advanced keystone correction for angled projections.  
Input source automatically detected.  
About this Manual  
This manual is intended for end users and describes how to install and operate the DLP projector.  
Wherever possible, relevant information—such as an illustration and its description—has been kept on  
one page. This printer-friendly format is both for your convenience and to help save paper, thereby  
protecting the environment. It is suggested that you only print sections that are relevant to your needs.  
vi —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
Table of Contents  
vii –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
viii —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
GETTING STARTED  
Packing Checklist  
Carefully unpack the projector and check that the following items are included:  
DLP PROJECTOR WITH LENS CAP  
REMOTE CONTROL  
RGB CABLE  
POWER CORD  
(WITH TWO AA BATTERIES)  
CARRYING CASE  
CD-ROM  
QUICK START GUIDE  
WARRANTY CARD  
(OPTIONAL)  
(THIS USERS MANUAL)  
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It  
is recommend that you keep the original packing material should you ever need to return the equipment  
for warranty service.  
Caution:  
Avoid using the projector in dusty environments.  
1 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Views of Projector Parts  
Front-right View  
ITEM  
1.  
LABEL  
IR receiver  
DESCRIPTION  
Receive IR signal from remote control  
Projection Lens  
SEE PAGE  
Lens  
2.  
Focus ring  
Zoom ring  
Focuses the projected image  
Enlarges the projected image  
3.  
4.  
See Top view—On-screen Display (OSD) buttons  
and LEDs.  
Function keys  
5.  
Important:  
Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp  
cool. Do not obstruct any of the ventilation openings.  
2 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Top view—On-screen Display (OSD) buttons and LEDs  
1
2
6
3
7
8
4
5
9
12  
10  
11  
ITEM  
LABEL  
DESCRIPTION  
Opens and exits OSD menus  
SEE PAGE  
MENU  
1.  
Navigates in the OSD  
Quick Menu – For Keystone  
2.  
SOURCE  
AUTO  
Enter the Source menu  
3.  
4.  
5.  
6.  
Navigates and changes settings in the OSD  
Enter or confirm highlighted OSD menu item  
Optimizes image size, position, and resolution  
Navigates and changes settings in the OSD  
7.  
8.  
9.  
Navigates in the OSD  
Quick Menu – For Keystone  
Turns the projector On or Off  
Red  
Lamp Fail  
Error code  
LAMP LED  
10.  
Flashing  
Ready to power on (Standby)  
Lamp Lit , System stable  
Over Temperature  
Green  
POWER LED  
TEMP LED  
11.  
12.  
Flashing  
Red  
Error code  
Over Temperature  
3 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Rear view  
3
10  
1
2
4 5 6 7 8  
9
16 15 13 11  
14 12  
ITEM  
LABEL  
DESCRIPTION  
SEE PAGE  
AC IN  
Connect the POWER cable  
1.  
Connect the 3D IR glasses transmitter  
3D SYNC  
2.  
(Note: For Vivitek brand 3D IR glasses only)  
Connect the HDMI cable from a HDMI device  
Connect the HDMI cable from a HDMI device  
Connect the USB cable from a computer  
Connect the RGB cable from a computer  
Connect RS-232 serial port cable for remote control  
Connect the Component cable from a component device  
For USB charge support DC 5V  
HDMI 1  
HDMI 2  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
(USB)  
VGA IN  
RS-232C  
COMPONENT  
USB POWER  
Secure to permanent object with a Kensington® Lock  
system  
Kensington Lock  
10.  
VIDEO IN  
Connect the COMPOSITE cable from a video device  
Connect the AUDIO cable from a audio device  
Connect the S-VIDEO cable from a video device  
Connect an AUDIO cable from the audio device  
Connect an AUDIO cable to audio amplifier  
11.  
12.  
13.  
14.  
15.  
AUDIO IN (L and R)  
S-VIDEO  
AUDIO IN  
AUDIO OUT  
When connected to the screen through a commercially available cable,  
the screen deploys automatically on start up of the projector. The screen  
retracts when the projector is powered off (see notes below).  
DC 12V TRIGGER  
16.  
Note:  
y To use this feature, you must plug in the connector before turn on/off the projector.  
y Screen controllers are supplied and supported by screen manufacturers.  
y Do not use this jack for anything other than intended use.  
4 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Note:  
If your video equipment has both S-VIDEO and RCA jacks (composite video) connect to the  
S-VIDEO connector. S-VIDEO provides a better quality signal.  
Warning:  
As a safety precaution, disconnect all power to the projector and connecting devices before making  
connections.  
5 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
Bottom view  
ITEM  
1.  
LABEL  
Ceiling support holes  
Tilt adjustor  
DESCRIPTION  
SEE PAGE  
Contact your dealer for information on mounting the projector on a  
ceiling  
Rotate adjuster lever to adjust angle position.  
2.  
Note:  
When installing, ensure that you use only UL Listed ceiling mounts.  
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw  
depth of 12 mm (0.47 inch).  
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount  
load capacity must exceed the weight of the installed equipment, and as an additional precaution  
be capable of withstanding three times the weight of the equipment (not less than 5.15 kg) over a  
period of 60 seconds.  
6 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Remote Control Parts  
30  
29  
1
2
3
28  
27  
4
5
6
7
26  
25  
8
9
10  
11  
12  
13  
14  
15  
24  
23  
22  
21  
20  
16  
17  
18  
19  
Important:  
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency  
fluorescent lights can disrupt remote control operation.  
2. Be sure nothing obstructs the path between the remote control and the projector. If the path  
between the remote control and the projector is obstructed, you can bounce the signal off certain  
reflective surfaces such as projector screens.  
3. The buttons and keys on the projector have the same functions as the corresponding buttons on  
the remote control. This user’s manual describes the functions based on the remote control.  
7 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
ITEM  
1.  
LABEL  
Power OFF  
HDMI 2  
DESCRIPTION  
Turns the projector off  
SEE PAGE  
Displays the HDMI 2 source selection  
Displays the PC source selection  
Displays the VIDEO source selection  
2.  
PC  
3.  
VIDEO  
4.  
Up cursor /  
Keystone+  
Navigates and changes settings in the OSD  
Quick Menu – For Keystone  
5.  
ENTER  
Enters and confirms settings in the OSD  
Navigates and changes settings in the OSD  
6.  
7.  
Right cursor  
Downp cursor /  
Keystone-  
Navigates and changes settings in the OSD  
Quick Menu – For Keystone  
8.  
ASPECT RATIO  
SOURCE  
Displays the ASPECT RATIO selections  
Detects the input device  
9.  
10.  
11.  
2D f 3D  
Toggle 3D function  
BRIGHT  
SHARP  
COLOR  
TINT  
Displays the brightness setting bar  
Displays the sharpness setting bar  
Displays the color setting bar  
Displays the tint setting bar  
12.  
13.  
14.  
15.  
16.  
BLANK  
Makes the screen blank  
FREEZE  
AUTO  
Freezes/unfreezes the on-screen picture  
17.  
18.  
Auto adjustment for frequency, phase, and position  
Turns on or off the remote control backlight for about 10 seconds.  
Pressing any other key while the backlight is on keeps the backlight on  
for a further 10 seconds.  
LIGHT  
19.  
VOL -  
20.  
21.  
22.  
23.  
24.  
25.  
26.  
27.  
28.  
29.  
30.  
Adjusts volume  
VOL +  
MUTE  
Mutes the built-in speaker  
CONTRAST  
PICTURE MODE  
MENU/ EXIT  
Left cursor  
COMP  
Displays the contrast settings bar  
Changes the Display Mode setting  
Opens and exits the OSD  
Navigates and changes settings in the OSD  
Displays the Component source selection  
Displays the HDMI 1 source selection  
Turns the projector on  
HDMI 1  
Power ON  
IR transmitter  
Transmits signals to projector  
8 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
Remote Control Operating Range  
The remote control uses infrared transmission to control the projector. It is not necessary to point the  
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or  
the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and  
15 degrees above or below the projector level. If the projector does not respond to the remote control,  
move a little closer.  
Projector and Remote Control Buttons  
The projector can be operated using the remote control or the buttons on the top of the projector. All  
operations can be carried out with the remote control; however, the buttons on the projector are  
limited in use.  
9 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Inserting the Remote Control Batteries  
Remove the battery compartment  
cover by sliding the cover in the  
direction of the arrow.  
1.  
Insert the battery with the positive  
side facing up.  
2.  
Replace the cover.  
3.  
Caution:  
1. Only use AA batteries (Alkaline batteries are recommended).  
2. Dispose of used batteries according to local ordinance regulations.  
3. Remove the batteries when not using the projector for prolonged periods.  
10 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
SETUP AND OPERATION  
Starting and Shutting down the Projector  
Connect the power cord to the  
projector. Connect the other end to  
a wall outlet.  
1.  
The  
POWER LED on the  
projector light.  
Turn on the connected devices.  
Ensure the POWER LED not a  
2.  
3.  
flashing. Then press the  
POWER  
button to turn on the projector.  
The projector splash screen displays  
and connected devices are  
detected.  
(Security Lock) on page 13 if  
security lock is enabled.  
If more than one input device is  
connected, press the SOURCE  
button and use ▲▼ to scroll among  
devices.  
4.  
(Component is supported through  
the RGB to COMPONENT  
ADAPTER.)  
VGA: Analog RGB  
Component Video: Traditional component video  
Composite Video: Traditional composite video  
S-Video: Super video (Y/C separated)  
HDMI 1 / HDMI 2: High-Definition Multimedia  
Interface  
11 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
When the “Power Off? /Press  
5.  
Power again” message appears,  
press the POWER button. The  
projector turns off.  
Caution:  
1. Be sure to remove the lens cap before starting projector.  
2. Do not unplug the power cord until the POWER LED stops flashing–indicating the projector has  
cooled down.  
12 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
Setting an Access Password (Security Lock)  
You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector.  
When enabled, the password must be entered after you power on the projector. (See Navigating the  
OSD on page 17 and Setting the OSD Language on page 18 for help on using OSD menus.)  
Important:  
Keep the password in a safe place. Without the password, you will not be able to use the projector.  
If you lose the password, contact your reseller for information on clearing the password.  
Press the MENU button to open the  
OSD menu.  
1.  
Press the cursor ◄► button to move  
to the Settings 1 menu, press the  
2.  
cursor ▲▼ button to select Advanced  
1.  
Press  
(Enter) / to enter the  
3.  
4.  
Advanced 1 sub menu. Press the  
cursor ▲▼ button to select Security  
Lock.  
Press the cursor ◄► button to enter  
and enable or disable security lock  
function.  
A password dialog box automatically  
appears.  
13 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
You can use the cursor buttons  
▲▼◄►  
5.  
either on keypad or IR remote control  
for password entry. You can use any  
combination including the same arrow  
five times, but not less than five.  
Press the cursor buttons in any order  
to set the password. Push the MENU  
button to exit the dialog box.  
The password confirm menu appears  
6.  
when user presses the power-on key  
in case the Security Lock is enabled.  
Enter the password in the order you  
set it at step 5. In case you forget the  
password, please contact the service  
center.  
The service center will validate the  
owner and help reset the password.  
14 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
Adjusting the Projector Level  
Take note of the following when setting up the projector:  
The projector table or stand should be level and sturdy.  
Position the projector so that it is perpendicular to the screen.  
Ensure the cables are in a safe location. You could trip over them.  
To adjust the angle of the picture, turn the tilt-adjuster right or left until the desired  
angle has been achieved.  
15 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Adjusting the Zoom, Focus and Keystone  
Use the Image-zoom  
control (on the projector  
only) to resize the  
1.  
projected image and  
screen size  
.
Use the Image-focus  
control (on the projector  
only) to sharpen the  
2.  
3.  
projected image  
.
Use the KEYSTONE  
buttons (on the  
projector or the remote  
control) to correct  
image-trapezoid (wider  
top or bottom) effect.  
The keystone control  
appears on the display.  
4.  
Adjusting the Volume  
Press the Volume +/-  
buttons on the remote  
control.  
1.  
The volume control  
appears on the display.  
Press the MUTE button  
to turn off the volume.  
(This feature is available  
only on the remote).  
2.  
16 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
ON-SCREEN DISPLAY (OSD) MENU SETTINGS  
OSD Menu Controls  
The projector has an OSD that lets you make image adjustments and change various settings.  
Navigating the OSD  
You can use the remote control cursor buttons to navigate and make changes to the OSD.  
1
2
1
2
3
4
1
3
5
4
1
5
1. To enter the OSD, press the  
MENU button.  
2. There are three menus.  
Press the cursor ◄► button  
to move through the menus.  
3. Press the cursor ▲▼ button  
to move up and down in a  
menu.  
4. Press ◄► to change values  
for settings.  
5. Press MENU to close the  
OSD or leave a submenu.  
Note:  
Depending on the video source, not all items in the OSD are available. For example, the  
Horizontal/Vertical Position items in the Computer menu can only be modified when connected  
to a PC. Items that are not available cannot be accessed and are grayed out.  
17 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Setting the OSD Language  
Set the OSD language to your preference before continuing.  
1. Press the MENU button. Press the cursor ◄► button to navigate to Settings 1. Press the  
cursor ▲▼ button to move to the Advanced 1 menu.  
2. Press  
(Enter) / to enter the Advanced 1 sub menu. Press the cursor ▲▼ button  
until Language is highlighted.  
3. Press the cursor button until the language you want is highlighted.  
4. Press the MENU button four times to close the OSD.  
18 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
OSD Menu Overview  
Use the following illustration to quickly find a setting or determine the range for a setting.  
Display Mode  
Presentation, Bright, Game, Movie, TV, sRGB, Blackboard, User  
Image  
Brightness  
Contrast  
Computer  
Horizontal Position  
Vertical Position  
Frequency  
Tracking  
Auto Image  
Advanced  
1.8, 2.0, 2.2, 2.4, B&W, Linear  
Color Manager  
Green  
Blue  
Hue  
Saturation  
Gain  
Hue  
Saturation  
Gain  
Hue  
Saturation  
Gain  
Cyan  
Hue  
Saturation  
Gain  
Magenta  
Yellow  
Hue  
Saturation  
Gain  
Hue  
Saturation  
Gain  
White  
Red  
Green  
Blue  
Source  
Projection  
Aspect Ratio  
Keystone  
Source  
Reference Input Source Select (IR/Keypad)  
Settings 1  
Normal, Real, Ceiling, Real+Ceiling  
Fill, 4:3, 16:9, Letter Box, Native, 2.35:1  
Digital Zoom  
Audio  
Volume  
Mute  
SRS  
Advanced 1  
Language  
English, Frans, Deutsch, Español, Português, 簡体中文, 繁體中文, Italiano, Norsk,  
Svenska, Nedlads, Русский, Polski, Suomi, Ελληνικά, 한국어, Magyar, Čeština, 
اﻟﻌﺮﺑﻴﺔ
,  
Türkçe, Vit, 日本語, ไทย, 
ﻓﺎرﺳﯽ
, 
תירבע
 
Security Lock  
Blank Screen  
Off, On  
Blank, Red, Green, Blue, White  
Splash Logo  
Closed Captioning  
Keypad Lock  
Std., Off, User  
Off, On  
Off, On  
Off, DLP-Link, IR  
Off, On  
3D Setting  
3D  
3D Sync Invert  
3D Format  
Frame Sequential, Top/Bottom, Side-By-Side, Frame Packing  
(3D FramePacking HDMI source only)  
Advanced 2  
Test Pattern  
H Image Shift  
V Image Shift  
None, Grid, White, Red, Green, Blue, Black  
Auto Source  
No Signal Power Off  
Auto Power On  
Off, On  
Settings 2  
Off, On  
Std. , Boost  
Lamp Mode  
Reset All  
Status  
Advanced 1  
Menu Position  
Center, Down, Up, Left, Right  
0%, 25%, 50%, 75%, 100%  
Translucent Menu  
Low Power Mode  
Fan Speed  
Off, On  
Normal, High  
Lamp Hour Reset  
Projector ID  
00-98  
Advanced 2  
Sleep Timer  
Disable, Enable  
Disable, Enable  
Disable, Enable  
Source Filter  
VGA1  
Component Video  
Composite Video  
S-Video  
Disable, Enable  
Disable, Enable  
Disable, Enable  
HDMI 1  
HDMI 2  
19 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Image Menu  
Attention !  
All of display mode parameters when changed will be saved to user mode.  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image  
Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to enter  
and change values for settings.  
ITEM  
DESCRIPTION  
Display Mode  
Brightness  
Contrast  
Press the cursor ◄► button to enter and set the Display Mode.  
Press the cursor ◄► button to enter and adjust the display brightness.  
Press the cursor ◄► button to enter and adjust the display contrast.  
Computer  
Press  
(Enter) / to enter the Computer menu. See Computer Menu on page 21.  
Press  
position.  
(Enter) / to automatically adjustment for phase, tracking, size and  
Auto Image  
Advanced  
Press  
22.  
(Enter) / to enter the Advanced menu. See Advanced Feature on page  
Press  
(Enter) / to enter the color manager menu. See page 23 for more  
Color Manager  
information on Color Manager.  
20 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Computer Menu  
Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press ▲▼  
to move to the Computer menu and then press Enter or . Press ▲▼ to move up and down in the  
Computer menu.  
ITEM  
DESCRIPTION  
Horizontal Position  
Vertical Position  
Frequency  
Press the cursor ◄► button to enter and adjust the display position to left or right.  
Press the cursor ◄► button to enter and adjust the display position to up or down.  
Press the cursor ◄► button to enter and adjust the A/D sampling clock.  
Press the cursor ◄► button to enter and adjust the A/D sampling dot.  
Tracking  
21 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Advanced Feature  
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲  
to move to the Advanced menu and then press Enter or . Press ▼▲ to move up and down in the  
Advanced menu.  
ITEM  
DESCRIPTION  
Brilliant Color  
Sharpness  
Gamma  
Press the cursor ◄► button to enter and adjust the Brilliant Color value.  
Press the cursor ◄► button to enter and adjust the display sharpness.  
Press the cursor ◄► button to enter and adjust the gamma correction of the display.  
Color Temperature Press the cursor ◄► button to enter and adjust the color temperature.  
Press the cursor ◄► button to enter and enable or disable the Automatic Gain Control  
for video source.  
Video AGC  
Video Saturation  
Video Tint  
Press the cursor ◄► button to enter and adjust the video saturation.  
Press the cursor ◄► button to enter and adjust the video tint/hue.  
22 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Color Manager  
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲  
to move to the Color Manager menu and then press Enter or . Press ▼▲ to move up and down in  
the Color Manager menu.  
ITEM  
DESCRIPTION  
Select to enter the Red Color Manager.  
Red  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.  
Select to enter the Green Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.  
Green  
Blue  
Select to enter the Blue Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.  
Select to enter the Cyan Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.  
Cyan  
Select to enter the Magenta Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.  
Magenta  
Yellow  
White  
Select to enter the Yellow Color Manager.  
Press the◄► buttons to adjust the Hue, Saturation, and Gain.  
Select to enter the White Color Manager.  
Press the ◄► buttons to adjust the Red, Green, and Blue.  
23 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Settings 1 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the  
Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. Press  
◄► to enter and change values for settings.  
ITEM  
Source  
DESCRIPTION  
Press the cursor ◄► button to enter the Source menu. Reference input Source select  
(IR / Keypad).  
Projection  
Aspect Ratio  
Keystone  
Digital Zoom  
Audio  
Press the cursor ◄► button to enter and choose from four projection methods:  
Press the cursor ◄► button to enter and adjust the video aspect ratio.  
Press the cursor ◄► button to enter and adjust the display keystone.  
Press the cursor ◄► button to enter and adjust the Digital Zoom menu.  
Press  
(Enter) / to enter the Audio menu. See Audio on page 25.  
Press  
page 26.  
(Enter) / to enter the Advanced 1 menu. See Advanced 1 Feature on  
Advanced 1  
Advanced 2  
Press  
page 28.  
(Enter) / to enter the Advanced 2 menu. See Advanced 2 Feature on  
24 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Audio  
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press  
▼▲ to move to the Audio menu and then press Enter or . Press ▼▲ to move up and down in the  
Audio menu.  
ITEM  
Volume  
DESCRIPTION  
Press the cursor ◄► button to enter and adjust the audio volume.  
Press the cursor ◄► button to enter and turn on or off the speaker.  
Press the cursor ◄► button to enter and turn on or off the audio surround.  
Mute  
SRS  
25 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Advanced 1 Feature  
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press  
▲▼ to move to the Advanced 1 menu and then press Enter or . Press ▲▼ to move up and down  
in the Advanced 1 menu. Press ◄► to enter and change values for setting.  
ITEM  
Language  
DESCRIPTION  
Press the cursor ◄► button to enter and select a different localization Menu.  
Press the cursor ◄► button to enter and enable or disable security lock function.  
Press the cursor ◄► button to enter and select different color to blank the screen.  
Press the cursor ◄► button t enter and o select splash logo on or off.  
Security Lock  
Blank Screen  
Splash Logo  
Closed Captioning  
Press the cursor ◄► button to enter and enable or disable Closed Captioning  
Press the cursor ◄► button to enter and enable or disable keys can be work on  
keypad.  
Keypad Lock  
3D Setting  
Note:  
Press  
(Enter) / to enter the 3D menu. See page 27 for more information on 3D  
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD device under the  
3D Disc Menu.  
26 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
3D Setting  
ITEM  
DESCRIPTION  
3D  
Press the cursor ◄► button to enter and select different 3D mode.  
3D Sync Invert  
3D Format  
Press the cursor ◄► button to enter and enable or disable 3D Sync Invert.  
Press the cursor ◄► button to enter and enable or disable different 3D Format.  
Note:  
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting.  
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled for  
selection.  
3. Use 3D glasses to view a 3D image.  
4. You need 3D content from a 3D DVD or 3D media file.  
5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection feature).  
6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a  
driver on your PC and connect a USB emitter.  
7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D).  
8. Power on the glasses. Glasses normally have a power on -off switch.  
Each type of glasses has their own configuration instructions. Please follow the configuration  
instructions that come with your glasses to finish the setup process.  
Note:  
Since different types of glass (DLP link or IR shutter glass) have their own setting instructions,  
Please follow the guide to finish the setup process.  
27 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Advanced 2 Feature  
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press  
▲▼ to move to the Advanced 2 menu and then press Enter or . Press ▲▼ to move up and down  
in the Advanced 2 menu. Press ◄► to enter and change values for setting.  
ITEM  
DESCRIPTION  
Test Pattern  
H Image Shift  
V Image Shift  
Press the cursor ◄► button to enter and select internal test pattern.  
Press the cursor ◄► button to enter and select H Image Shift.  
Press the cursor ◄► button to enter and select V Image Shift.  
28 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Settings 2 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the  
Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu.  
ITEM  
DESCRIPTION  
Press the cursor ◄► button to enter and enable or disable automatic source  
detection.  
Auto Source  
No Signal Power  
Off (min.)  
Press the cursor ◄► button to enter and enable or disable automatic shutdown of  
lamp when no signal.  
Press the cursor ◄► button to enter and enable or disable automatic power On when  
AC power is supplied.  
Auto Power On  
Lamp Mode  
Press the cursor ◄► button to enter and select the lamp mode for higher brightness  
or lower brightness to save lamp life.  
Reset All  
Status  
Press  
(Enter) / to reset all settings to default values.  
Press  
Status.  
(Enter) / to enter the Status menu. See page 30 for more information on  
Press  
page 31.  
(Enter) / to enter the Advanced 1 menu. See Advanced 1 Feature on  
Advanced 1  
Advanced 2  
Press  
page 33.  
(Enter) / to enter the Advanced 2 menu. See Advanced 2 Feature on  
29 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Status  
Press the cursor ▲▼ button to move up and down in the Settings 2 menu. Select the Status menu  
and press Enter or to enter.  
ITEM  
DESCRIPTION  
Active Source  
Display the activated source.  
Displays resolution/video information for RGB source and color standard for Video  
source.  
Video Information  
Lamp Hours  
Lamp hour used information is displayed. ( ECO. and Normal)  
30 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Advanced 1 Feature  
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press  
▲▼ to move to the Advanced 1 menu and then press Enter or . Press ▲▼ to move up and down  
in the Advanced 1 menu. Press ◄► to enter and change values for setting.  
ITEM  
DESCRIPTION  
Menu Position  
Press the cursor ◄► button to enter and select different OSD location.  
Press the cursor ◄► button to enter and select OSD background translucent level.  
Press the cursor ◄► button to enter and turn Low Power Mode on or off.  
Translucent Menu  
Low Power Mode  
Press the cursor ◄► button to enter and toggle between Normal and High fan  
speeds.  
Note: We recommend selecting high speed in high temperatures, high humidity, or  
high altitude (higher than 1500m/4921ft) areas.  
Fan Speed  
After replacing the lamp, this item should be reset. See page 32 for more information  
Lamp Hour Reset  
Projector ID  
Press the cursor ◄► button to enter and adjust a two digit projector ID from 00  
through 98.  
31 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Lamp Hour Reset  
Please refer to Resetting the Lamp on page 37 to reset the lamp hour counter.  
32 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Advanced 2 Feature  
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press  
▲▼ to move to the Advanced 2 menu and then press Enter or . Press ▲▼ to move up and down  
in the Advanced 2 menu. Press ◄► to enter and change values for setting.  
ITEM  
DESCRIPTION  
Press the cursor ◄► button to enter and set Sleep timer. The projector automatically  
turns off after the preset period of time.  
Sleep Timer  
Press  
(Enter) / to enter the Source Filter menu. See page 34 for more  
Source Filter  
information on Source Filter.  
33 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Source Filter  
Press the ENTER button to enter the Source Filter sub menu.  
ITEM  
DESCRIPTION  
VGA  
Press the cursor ◄► button to enter and enable or disable the VGA1 source.  
Press the cursor ◄► button to enter and enable or disable the Component Video  
source.  
Component Video  
Composite Video  
Press the cursor ◄► button to enter and enable or disable the Composite Video  
source.  
S-Video  
HDMI 1  
HDMI 2  
Press the cursor ◄► button to enter and enable or disable the S-Video source.  
Press the cursor ◄► button to enter and enable or disable the HDMI 1 source.  
Press the cursor ◄► button to enter and enable or disable the HDMI 2 source.  
34 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
MAINTENANCE AND SECURITY  
Replacing the Projection Lamp  
The projection lamp should be replaced when it burns out. It should only be replaced with a certified  
replacement part, which you can order from your local dealer.  
Important:  
a. The projection lamp used in this product contains a small amount of mercury.  
b. Do not dispose this product with general household waste.  
c. Disposal of this product must be carried out in accordance with the regulations of your local  
authority.  
Warning:  
Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to  
do so could result in a severe burn.  
Caution:  
In rare cases the lamp bulb may burn out during normal operation and cause glass dust or shards  
to be discharged outward from the rear exhaust vent.  
Do not inhale or do not touch glass dust or shards. Doing so could result in injury.  
Always keep your face away from the exhaust vent so that you do not suffer from the gas and  
broken shards of the lamp.  
When removing the lamp from a ceiling-mounted projector, make sure that no one is under the  
projector. Glass fragments could fall if the lamp has been burned out.  
IF A LAMP EXPLODES  
If a lamp explodes, the gas and broken shards may scatter inside the projector and they may come  
out of the exhaust vent. The gas contains toxic mercury.  
Open windows and doors for ventilation.  
If you inhale the gas or the shards of the broken lamp enter your eyes or mouth, consult the doctor  
immediately.  
Loosen the single screw  
on the lamp compartment  
cover.  
1.  
35 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Remove the lamp  
compartment cover.  
2.  
Remove the three screws  
from the lamp module.  
3.  
Lift the module handle up.  
4.  
Pull firmly on the module  
handle to remove the lamp  
module.  
5.  
Reverse steps 1 to 5 to  
install the new lamp  
module.  
6.  
While installing, align the  
lamp module with the  
connector and ensure it is  
level to avoid damage.  
Note:  
The lamp module must sit  
securely in place and the  
lamp connector must be  
connected properly before  
tightening the screws.  
36 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
Resetting the Lamp  
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:  
Press the MENU button to open  
the OSD menu.  
1.  
Press the cursor ◄► button to  
2.  
move to the Settings 2 menu.  
Press the cursor button to move  
down to Advanced 1 and press  
enter.  
Press the cursor ▼▲ button to  
move down to Lamp Hour Reset.  
3.  
Press the cursor or Enter  
button.  
4.  
A message screen appears.  
Press ▼▲◄► buttons to reset  
the lamp hour.  
5.  
Press the MENU button to get  
back to Settings 2.  
6.  
37 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Cleaning the Projector  
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.  
Warning:  
1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so  
could result in a severe burn.  
2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings  
on the projector.  
3. If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated  
room for several hours before using.  
4. If a lot of water gets into the projector interior when cleaning, have the projector serviced.  
Cleaning the Lens  
You can purchase optic lens cleaner from most camera stores. Refer to the following to clean the  
projector lens.  
1. Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to  
the lens.)  
2. Lightly wipe the lens in a circular motion.  
Caution:  
1. Do not use abrasive cleaners or solvents.  
2. To prevent discoloration or fading, avoid getting cleaner on the projector case.  
Cleaning the Case  
Refer to the following to clean the projector case.  
1. Wipe off dust with a clean dampened cloth.  
2. Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and  
then wipe the case.  
3. Rinse all detergent from the cloth and wipe the projector again.  
Caution:  
To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners.  
38 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
Using the Kensington® Lock & Using the Security Bar  
Using the Kensington® Lock  
If you are concerned about security, attach the projector to a permanent object with the Kensington  
slot and a security cable.  
Note:  
Contact your vendor for details on purchasing a suitable Kensington security cable.  
The security lock corresponds to Kensington’s MicroSaver Security System. If you have any  
comment, contact: Kensington, 2853 Campus Drive, San Mateo, CA 94403, U.S.A. Tel: 800-535-  
Using the Security Bar  
In addition to the password protection function and the Kensington lock, the Security Bar helps  
protect the projector from unauthorized removal. See the following picture.  
39 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
TROUBLESHOOTING  
Common problems and solutions  
These guidelines provide tips to deal with problems you may encounter while using the projector. If  
the problem remains unsolved, contact your dealer for assistance.  
Often after time spent troubleshooting, the problem is traced to something as simple as a loose  
connection. Check the following before proceeding to the problem-specific solutions.  
Use some other electrical device to confirm that the electrical outlet is working.  
Ensure the projector is turned on.  
Ensure all connections are securely attached.  
Ensure the attached device is turned on.  
Ensure a connected PC is not in suspending mode.  
Ensure a connected notebook computer is configured for an external display.  
(This is usually done by pressing an Fn-key combination on the notebook.)  
Tips for Troubleshooting  
In each problem-specific section, try the steps in the order suggested. This may help you to solve the  
problem more quickly.  
Try to pin point the problem and thus avoid replacing non-defective parts.  
For example, if you replace batteries and the problem remains, put the original batteries back and go  
to the next step.  
Keep a record of the steps you take when troubleshooting: The information may be useful when  
calling for technical support or for passing on to service personnel.  
40 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
LED Error Messages  
POWER LED  
GREEN  
LAMP LED  
RED  
TEMP LED  
RED  
ERROR CODE MESSAGES  
Flashing  
OFF  
System Initial  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
OFF  
Ready to Power on (Standby)  
System Power on  
Flashing  
ON  
OFF  
OFF  
Lamp Lit , System stable  
Cooling  
Flashing  
ON  
OFF  
OFF  
Over Temperature  
4 blinks  
5 blinks  
5 blinks  
5 blinks  
5 blinks  
5 blinks  
5 blinks  
5 blinks  
5 blinks  
5 blinks  
OFF  
Thermal Break Sensor error  
Lamp Fail  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
1 blinks  
2 blinks  
3 blinks  
4 blinks  
5 blinks  
6 blinks  
7 blinks  
8 blinks  
Lamp Temperature shut down  
Lamp Short circuit in output detected  
Lamp End of lamp life detected  
Lamp did not ignite  
Lamp extinguished during normal operation  
Lamp extinguished during run-up phase  
Lamp voltage got error  
Lamp ballast got error  
Ballast watt value is out of range  
(Lamp Normal & Eco mode)  
5 blinks  
9 blinks  
OFF  
5 blinks  
6 blinks  
6 blinks  
6 blinks  
7 blinks  
8 blinks  
9 blinks  
10 blinks  
1 blinks  
2 blinks  
3 blinks  
OFF  
Lamp ballast Communication error  
Fan-1 error  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
Fan-2 error  
Fan-3 error  
Case Open  
OFF  
DAD1000 error  
Color wheel error  
OFF  
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before restarting  
the projector. If the Power or Lamp LEDs are still blinking or any other situation that isn't listed in the chart  
above, please contact your service center.  
Image Problems  
Problem: No image appears on the screen  
1. Verify the settings on your notebook or desktop PC.  
2. Turn off all equipment and power up again in the correct order.  
Problem: The image is blurred  
1. Adjust the Focus on the projector.  
2. Press the Auto button on the remote control.  
3. Ensure the projector-to-screen distance is within the specified range.  
4. Check that the projector lens is clean.  
Problem: The image is wider at the top or bottom (trapezoid effect)  
41 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
1. Position the projector so it is as perpendicular to the screen as possible.  
2. Use the Keystone button on the remote control to correct the problem.  
Problem: The image is reversed  
Check the Projection setting on the Settings 1 menu of the OSD.  
Problem: The image is streaked  
1. Set the Frequency and Tracking settings on the Image->Computer menu of the OSD to  
the default settings.  
2. To ensure the problem is not caused by a connected PC’s video card, connect to another  
computer.  
Problem: The image is flat with no contrast  
Adjust the Contrast setting on the Image menu of the OSD.  
Problem: The color of the projected image does not match the source image.  
Adjust the Color Temperature and Gamma settings on the Image->Advanced menu of the  
OSD.  
Lamp Problems  
Problem: There is no light from the projector  
1. Check that the power cable is securely connected.  
2. Ensure the power source is good by testing with another electrical device.  
3. Restart the projector in the correct order and check that the Power LED is on.  
4. If you have replaced the lamp recently, try resetting the lamp connections.  
5. Replace the lamp module.  
6. Put the old lamp back in the projector and have the projector serviced.  
Problem: The lamp goes off  
1. Power surges can cause the lamp to turn off. Re-plug power cord. When the Power LED  
is on, press the power button.  
2. Replace the lamp module.  
3. Put the old lamp back in the projector and have the projector serviced.  
Remote Control Problems  
Problem: The projector does not respond to the remote control  
1. Direct the remote control towards remote sensor on the projector.  
2. Ensure the path between remote and sensor is not obstructed.  
3. Turn off any fluorescent lights in the room.  
4. Check the battery polarity.  
5. Replace the battery.  
6. Turn off other Infrared-enabled devices in the vicinity.  
7. Have the remote control serviced.  
Audio Problems  
Problem: There is no sound  
1. Adjust the volume on the remote control.  
2. Adjust the volume of the audio source.  
42 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
3. Check the audio cable connection.  
4. Test the source audio output with other speakers.  
5. Have the projector serviced.  
Problem: The sound is distorted  
1. Check the audio cable connection.  
2. Test the source audio output with other speakers.  
3. Have the projector serviced.  
Having the Projector Serviced  
If you are unable to solve the problem, you should have the projector serviced. Pack the projector in  
the original carton. Include a description of the problem and a checklist of the steps you took when  
trying to fix the problem: The information may be useful to service personnel. For servicing, return the  
projector to the place you purchased it.  
43 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
HDMI Q & A  
Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI  
cable?  
Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High-  
Speed cables.  
˙Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or  
up to 2.25Gbps, which is the equivalent of a 720p/1080i signal.  
˙High Speed (or “category 2”) HDMI cables have been tested to perform at speeds of 340Mhz  
or up to 10.2Gbps, which is the highest bandwidth currently available over an HDMI cable  
and can successfully handle 1080p signals including those at increased color depths and/or  
increased refresh rates from the Source. High-Speed cables are also able to accommodate  
higher resolution displays, such as WQXGA cinema monitors (resolution of 2560 x 1600).  
Q. How do I run HDMI cables longer than 10 meters?  
There are many HDMI Adopters working on HDMI solutions that extend a cable’s effective  
distance from the typical 10 meter range to much longer lengths. These companies  
manufacture a variety of solutions that include active cables (active electronics built into  
cables that boost and extend the cable’s signal), repeaters, amplifiers as well as CAT5/6 and  
fiber solutions.  
Q. How can I tell if a cable is an HDMI certified cable?  
All HDMI products are required to be certified by the manufacturer as part of the HDMI  
Compliance Test Specification. However, there may be instances where cables bearing the  
HDMI logo are available but have not been properly tested. HDMI Licensing, LLC actively  
investigates these instances to ensure that the HDMI trademark is properly used in the  
market. We recommend that consumers buy their cables from a reputable source and a  
company that is trusted.  
For more detail information check http://www.hdmi.org/learningcenter/faq.aspx#49  
44 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
SPECIFICATIONS  
Specifications  
Model  
H1180HD  
H1185HD  
Display type  
TI DMD 0.65" 1080p  
Resolution  
1080p 1920x1080  
1.2 ~ 10 m  
Projection distance  
Projection screen size  
Projection lens  
Zoom ratio  
25.9" ~ 324.97"  
Manual Focus/Manual Zoom  
1.5x  
Vertical keystone  
+/- 40 Degree  
ti  
Projection methods  
Front, Rear, Desktop/Ceiling (Rear, Front)  
VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA, WUXGA, Mac  
480i, 480p, 576i, 576p, 720p, 1080i, 1080p  
NTSC, PAL, SECAM  
Data compatibility  
SDTV/EDTV/ HDTV  
Video compatibility  
H-Sync  
2D: 15, 30~91.4KHz / 3D: 101.6KHz  
24~30Hz, 47~120Hz  
V-Sync  
Safety certification  
Operation temperature  
Dimensions  
FCC-B, cUL, UL, CE, C-tick, CCC, KC, PSE, PCT, CS, NOM  
5° ~ 35°C  
285 mm (W) x 261 mm (D) x 130 mm (H)  
AC Universal 100-240V  
AC Input  
Power consumption  
Lamp  
240W, <0.5W(Stand By)  
290W, <0.5W(Stand By)  
190W (Boost) / 160W (Std)  
240W (Boost) / 190W (Std)  
Audio speaker  
10W mono speaker  
VGA x 1  
Component (YPbPr RCAx3) x 1  
Composite x 1  
Input Terminals  
S-Video x 1  
HDMI x 2  
PC Audio jack(3.5mm) x 1  
RCA Stereo Audio LR x 1  
PC Audio jack(3.5mm) x 1  
RS-232C  
Output Terminals  
Control Terminals  
Security  
3D sync  
Screen trigger: DC Jack x 1 (DC12V 200mA output function)  
USB (Type mini B) - service only  
USB (type A) support DC 5V  
Kensington lock / Security Bar  
Note: For questions regarding product specifications, please contact your local distributor.  
45 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Projection Distance vs. Projection Size  
Projection Distance and Size Table  
H1180HD / H1185HD  
PROJECTION  
DISTANCE  
MM)  
PROJECTION  
DISTANCE  
MM)  
IMAGE DIAGONAL  
IMAGE WIDTH  
(INCH)  
IMAGE HIGHT  
(INCH)  
OFFSET-A  
( MM )  
INCH)  
FROM  
TO  
60  
70  
52.29  
61.01  
62.75  
69.73  
73.21  
78.44  
83.67  
87.16  
104.59  
117.66  
130.74  
174.32  
29.42  
34.32  
35.30  
39.22  
41.18  
44.12  
47.07  
49.03  
58.83  
66.19  
73.54  
98.05  
1846.3  
2154.0  
2215.6  
2461.7  
2584.8  
2769.5  
2954.1  
3077.2  
3692.6  
4154.2  
4615.8  
6154.4  
2776.1  
3238.8  
3331.3  
3701.5  
3886.6  
4164.2  
4441.8  
4626.8  
5552.2  
6246.2  
6940.3  
9253.7  
112.1  
130.8  
134.5  
149.4  
156.9  
168.1  
179.3  
186.8  
224.1  
252.2  
280.2  
373.6  
72  
80  
84  
90  
96  
100  
120  
135  
150  
200  
46 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Timing Mode Table  
H-SYNC V-SYNC COMPOSITE  
RGB  
HDMI  
SIGNAL RESOLUTION  
COMPONENT  
( KHZ )  
( HZ )  
S_VIDEO  
(ANALOG) (DIGITAL)  
NTSC  
15.734  
15.625  
37.9  
31.5  
37.9  
31.5  
37.9  
37.5  
43.3  
35.2  
37.9  
46.9  
48.1  
53.7  
76.3  
35.8  
37.3  
41.5  
48.4  
56.5  
60  
60  
50  
PAL/SECAM  
VESA  
640 x 400  
720 x 400  
720 x 400  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
1024 x 576  
1024 x 600  
1024 x 600  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 720  
1280 x 720  
1280 x 768  
1280 x 768  
1280 x 800  
1280 x 800  
1280 x 800  
1280 x 800  
1280 x 1024  
1280 x 1024  
85.08  
70.1  
85.04  
60  
72.8  
75  
85  
56.3  
60.3  
75  
72.2  
85.1  
120  
60  
60  
65  
60  
70.1  
75  
68.7  
97.6  
99  
85  
120  
120  
75  
67.5  
45  
60  
90  
120  
60  
47.4  
47.8  
49.7  
62.8  
71.6  
101.6  
64  
59.9  
59.8  
74.9  
84.9  
119.9  
60  
80  
75  
47 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
H-SYNC V-SYNC COMPOSITE  
RGB  
HDMI  
SIGNAL RESOLUTION  
COMPONENT  
( KHZ )  
( HZ )  
S_VIDEO  
(ANALOG) (DIGITAL)  
1280 x 1024  
1280 x 960  
1280 x 960  
1360 x 768  
1400 x 1050  
1440 x 900  
1440 x 900  
1440 x 900  
1600 x1200  
1680 x 1050  
1680 x 1050  
1920 x 1200  
1920 x 1080  
640 x 480  
91.1  
60  
85  
60  
85.9  
47.7  
65.3  
55.5  
55.9  
70.6  
75  
85  
60  
60  
59.9  
59.9  
75  
60  
64.7  
65.3  
74  
59.9  
60  
60  
67.5  
35  
60  
66.7  
74.5  
74.9  
75.1  
60  
832 x 624  
1024 x 768  
1152 x 870  
480i  
49.7  
60.2  
68.7  
15.734  
15.625  
31.3  
31.5  
37.5  
45  
Apple  
Macintosh  
SDTV  
EDTV  
576i  
50  
576p  
50  
480p  
60  
720p  
50  
720p  
60  
1080i  
33.8  
28.1  
27  
60  
1080i  
50  
HDTV  
1080p  
1080p  
1080p  
1080p  
1080p  
24  
28  
25  
33.7  
56.3  
67.5  
30  
50  
60  
OFrequency supported  
Frequency not supported  
The native resolution of the panel is 1920x1080  
Resolution others than native resolution may be display with uneven size of text or line  
The color of mean Displayable only. (4:3 only)  
The color of mean may have a little noise is acceptable  
HDTV timing main check tool is DVD player, VG828 is secondary  
48 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
Projector Dimensions  
P
A L M  
R
W E P O  
P
T E M  
49 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
REGULATORY COMPLIANCE  
FCC Warning  
This equipment has been tested and found to comply with the limits for a Class B digital device  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference when the equipment is operated in a commercial environment.  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instruction manual, may cause harmful interference to radio  
communications. Operation of this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct the interference at his/her own expense.  
Changes or modifications not expressly approved by the parties responsible for compliance could  
void the user’s authority to operate the equipment.  
Canada  
This class B digital apparatus complies with Canadian ICES-003.  
Safety Certifications  
FCC-B, cUL, UL, CE, C-tick, CCC, KC, PSE, PCT, CS, NOM.  
50 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DLP Projector—User’s Manual  
APPENDIX I  
RS-232C Protocol  
RS232 Setting  
Baud rate:  
9600  
Parity  
check:  
None  
Data bit:  
Stop bit:  
8
1
Flow  
Control  
None  
Minimum delay for next command: 1ms  
Control Command Structure  
Header code  
Command code Data code End code  
HEX  
ASCII  
Command  
Command  
Data  
Data  
0Dh  
CR  
‘V’  
Operation Command  
Note:  
XX=00-98, projector's ID, XX=99 is for all projectors  
Return Result P=Pass / F=Fail  
n: 0:Disable/1: Enable/Value(0~9999)  
Command Group 00  
ASCII  
VXXS0001  
VXXS0002  
VXXS0003  
HEX  
Function  
Description  
Return Result  
56h Xh Xh 53h 30h 30h 30h 31h 0Dh  
56h Xh Xh 53h 30h 30h 30h 32h 0Dh  
56h Xh Xh 53h 30h 30h 30h 33h 0Dh  
Power On  
P/F  
Power Off  
Resync  
P/F  
P/F  
VXXG0004  
VXXS0005n  
56h Xh Xh 47h 30h 30h 30h 34h 0Dh  
Get Lamp Hours  
Pn/F  
P/F  
56h Xh Xh 53h 30h 30h 30h 35h nh 0Dh Set Air filter timer  
n=0~999999  
n=0~999999  
VXXG0005  
VXXS0006  
56h Xh Xh 47h 30h 30h 30h 35h 0Dh  
56h Xh Xh 53h 30h 30h 30h 36h 0Dh  
Get Air filter timer  
System Reset  
Pn/F  
P/F  
0: Reset  
1:Standby  
2:Operation  
3:Cooling  
VXXG0007  
56h Xh Xh 47h 30h 30h 30h 37h 0Dh  
Get System Status  
Pn/F  
VXXG0008  
VXXG0009  
56h Xh Xh 47h 30h 30h 30h 38h 0Dh  
56h Xh Xh 47h 30h 30h 30h 39h 0Dh  
Get F/W Version  
Get Alter EMail  
Pn/F  
Pn/F  
VXXS0009n  
56h Xh Xh 53h 30h 30h 30h 39h nh 0Dh Set Alter Email  
P/F  
51 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DLP Projector—User’s Manual  
Command Group 01  
Function  
ASCII  
VXXG0101  
VXXS0101n  
VXXG0102  
VXXS0102n  
VXXG0103  
VXXS0103n  
VXXG0104  
VXXS0104n  
VXXG0105  
VXXS0105n  
HEX  
Description  
Return Value  
56h Xh Xh 47h 30h 31h 30h 31h 0Dh  
56h Xh Xh 53h 30h 31h 30h 31h nh 0Dh Set Brightness  
56h Xh Xh 47h 30h 31h 30h 32h 0Dh Get Contrast  
56h Xh Xh 53h 30h 31h 30h 32h nh 0Dh Set Contrast  
56h Xh Xh 47h 30h 31h 30h 33h 0Dh Get Color  
56h Xh Xh 53h 30h 31h 30h 33h nh 0Dh Set Color  
56h Xh Xh 47h 30h 31h 30h 34h 0Dh Get Tint  
56h Xh Xh 53h 30h 31h 30h 34h nh 0Dh Set Tint  
Get Brightness  
n=0~100  
Pn/F  
n=0~100  
n=0~100  
n=0~100  
n=0~100  
n=0~100  
n=0~100  
n=0~100  
0~31  
P/F  
Pn/F  
P/F  
Pn/F  
P/F  
Pn/F  
P/F  
56h Xh Xh 47h 30h 31h 30h 35h 0Dh  
Get Sharpness  
Pn/F  
P/F  
56h Xh Xh 53h 30h 31h 30h 35h nh 0Dh Set Sharpness  
0~31  
0:Warm  
VXXG0106  
VXXS0106n  
56h Xh Xh 47h 30h 31h 30h 36h 0Dh  
Get Color Temperature 1:Normal  
2:Cold  
Pn/F  
P/F  
0:Warm  
56h Xh Xh 53h 30h 31h 30h 36h nh 0Dh Set Color Temperature 1:Normal  
2:Cold  
0:1.8  
1:2.0C  
2:2.2  
3:2.4  
4:B&W  
5:Linear  
0:1.8  
1:2.0C  
2:2.2  
VXXG0107  
VXXS0107n  
56h Xh Xh 47h 30h 31h 30h 37h 0Dh  
Get Gamma  
Pn/F  
P/F  
56h Xh Xh 53h 30h 31h 30h 37h nh 0Dh Set Gamma  
3:2.4  
4:B&W  
5:Linear  
Command Group 02  
ASCII  
VXXS0201  
VXXS0202  
VXXS0203  
VXXS0204  
VXXS0205  
VXXS0206  
VXXS0207  
HEX  
Function  
Description  
Return Value  
56h Xh Xh 53h 30h 32h 30h 31h 0Dh  
56h Xh Xh 53h 30h 32h 30h 32h 0Dh  
56h Xh Xh 53h 30h 32h 30h 33h 0Dh  
56h Xh Xh 53h 30h 32h 30h 34h 0Dh  
56h Xh Xh 53h 30h 32h 30h 35h 0Dh  
56h Xh Xh 53h 30h 32h 30h 36h 0Dh  
56h Xh Xh 53h 30h 32h 30h 37h 0Dh  
Select RGB  
P/F  
P/F  
P/F  
P/F  
P/F  
P/F  
P/F  
Select RGB2  
Select DVI  
Select Video  
Select S-Video  
Select HDMI  
Select BNC  
Select  
Component  
VXXS0208  
VXXS0209  
56h Xh Xh 53h 30h 32h 30h 38h 0Dh  
56h Xh Xh 53h 30h 32h 30h 39h 0Dh  
P/F  
P/F  
Select HDMI 2(MEDIA)  
Return  
1:RGB  
2:RGB2  
3:DVI  
4:Video  
5:S-Video  
6:HDMI  
VXXG0220  
56h Xh Xh 47h 30h 32h 32h 30h 0Dh  
Get Current Source  
Pn/F  
7:BNC  
8:Component  
9:HDMI 2(MEDIA)  
52 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DLP Projector—User’s Manual  
Command Group 03  
Function  
ASCII  
HEX  
Description  
Return Value  
0: Fill  
1: 4:3  
2: 16:9  
VXXG0301  
56h Xh Xh 47h 30h 33h 30h 31h 0Dh  
Get Scaling  
Pn/F  
3: Letter Box  
4: Native  
5: 2.35:1  
0: Fill  
1: 4:3  
2: 16:9  
VXXS0301n  
56h Xh Xh 53h 30h 33h 30h 31h nh 0Dh Set Scaling  
P/F  
3: Letter Box  
4: Native  
5: 2.35:1  
VXXG0302  
VXXS0302n  
VXXG0303  
VXXS0303n  
VXXG0304  
VXXS0304n  
VXXG0305  
VXXS0305n  
VXXG0306  
VXXS0306n  
VXXG0307  
VXXS0307n  
56h Xh Xh 47h 30h 33h 30h 32h 0Dh  
Blank  
Pn/F  
P/F  
56h Xh Xh 53h 30h 33h 30h 32h nh 0Dh Blank  
56h Xh Xh 47h 30h 33h 30h 33h 0Dh  
Auto Keystone On  
Pn/F  
P/F  
56h Xh Xh 53h 30h 33h 30h 33h nh 0Dh Auto Keystone On  
56h Xh Xh 47h 30h 33h 30h 34h 0Dh  
56h Xh Xh 53h 30h 33h 30h 34h nh 0Dh Freeze On  
56h Xh Xh 47h 30h 33h 30h 35h 0Dh Volume  
56h Xh Xh 53h 30h 33h 30h 35h nh 0Dh Volume  
56h Xh Xh 47h 30h 33h 30h 36h 0Dh Treble  
56h Xh Xh 53h 30h 33h 30h 36h nh 0Dh Treble  
56h Xh Xh 47h 30h 33h 30h 37h 0Dh Bass  
56h Xh Xh 53h 30h 33h 30h 37h nh 0Dh Bass  
Freeze On  
Pn/F  
P/F  
n=0~30  
n=0~30  
n=0~16  
n=0~16  
n=0~16  
n=0~16  
Pn/F  
P/F  
Pn/F  
P/F  
Pn/F  
P/F  
0:Front  
1:Rear  
VXXG0308  
VXXS0308n  
56h Xh Xh 47h 30h 33h 30h 38h 0Dh  
Projection Mode  
Pn/F  
P/F  
2: Ceiling  
3: Rear+Ceiling  
0:Front  
1:Rear  
2: Ceiling  
3: Rear+Ceiling  
56h Xh Xh 53h 30h 33h 30h 38h nh 0Dh Projection Mode  
Set vertical keystone  
VXXG0309  
VXXS0309n  
VXXG0310  
VXXS0310n  
56h Xh Xh 47h 30h 33h 30h 39h 0Dh  
value  
n=-40~+40  
n=-40~+40  
n=-20~+20  
n=-20~+20  
Pn/F  
P/F  
Set vertical keystone  
56h Xh Xh 53h 30h 33h 30h 39h nh 0Dh  
value  
Set horizontal keystone  
56h Xh Xh 47h 30h 33h 31h 30h 0Dh  
value  
Pn/F  
P/F  
Set horizontal keystone  
56h Xh Xh 53h 30h 33h 31h 30h nh 0Dh  
value  
VXXG0311  
VXXS0311n  
VXXG0312  
VXXS0312n  
56h Xh Xh 47h 30h 33h 31h 31h 0Dh  
56h Xh Xh 53h 30h 33h 31h 31h nh 0Dh Adjust the zoom  
56h Xh Xh 47h 30h 33h 31h 32h 0Dh Adjust the focus  
56h Xh Xh 53h 30h 33h 31h 32h nh 0Dh Adjust the focus  
Adjust the zoom  
n=-10~+10  
n=-10~+10  
n=-20~+20  
n=-20~+20  
Pn/F  
P/F  
Pn/F  
P/F  
Adjust the vertical lens  
shift  
Adjust the vertical lens  
shift  
Adjust the horizontal  
lens shift  
VXXG0313  
VXXS0313n  
VXXG0314  
VXXS0314n  
56h Xh Xh 47h 30h 33h 31h 33h 0Dh  
56h Xh Xh 53h 30h 33h 31h 33h nh 0Dh  
56h Xh Xh 47h 30h 33h 31h 34h 0Dh  
56h Xh Xh 53h 30h 33h 31h 34h nh 0Dh  
n=-20~+20  
n=-20~+20  
n=-20~+20  
n=-20~+20  
Pn/F  
P/F  
Pn/F  
P/F  
Adjust the horizontal  
lens shift  
53 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Targus Network Card APA10US User Manual
Tascam Music Mixer 2488MKII User Manual
Teac Fryer SM50G Super User Manual
Toshiba Laptop toshiba computer User Manual
Trion Air Cleaner HE Plus 1400 User Manual
Tripp Lite Network Cables N002 005 YW User Manual
U Line Refrigerator CO1175 User Manual
Vialta Digital Photo Frame VF 100 User Manual
Vivotek Network Router ND4801 User Manual
Vulcan Hart Fryer TK65 User Manual