Vivitar Digital Camera X028 User Manual

ViviCam X028 Digital Camera  
User Manual  
© 2010 Sakar International, Inc. All rights reserved.  
Windows and the Windows logo are registered trademarks of Microsoft Corporation.  
All other trademarks are the property of their respective companies.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Thank you for purchasing this camera. Everything you need to take quality digital photos and  
videos is included with your camera.  
Vivitar makes capturing those special moments as easy as possible.  
Please read this manual carefully first in order to get the most out of your digital camera.  
NOTE: Your camera needs an SD Memory card (up to 32GB) for normal use.  
SD Memory cards are not included and need to be purchased separately.  
What‟s Included  
1. Digital Camera  
2. USB cable  
3. Vivitar Experience Image Manager  
software Installation CD  
4. Wrist Strap  
NOTE: SD Memory Card not included  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Parts of the Camera  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
Power Button  
12. LCD Screen  
13. Lens  
Shutter Button  
LED  
14. Flash  
W / Zoom Out  
T / Zoom In  
15. Microphone  
16. Speaker  
Mode  
17. Macro Switch  
18. USB Slot  
Up / Flash / Slide Show  
Right / Delete  
SET (Menu/OK)  
19. Strap Hole  
20. Tripod Socket  
21. SD Card Slot  
22. Battery Compartment  
10. Down / ViviLink  
11. Left / Scene  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial Camera Setup  
Installing the Batteries  
Installing the Memory Card  
SD Memory card  
(up to 32GB)  
needed for normal  
use  
Turning On the Camera  
Using the Camera  
Selecting  
the modes  
Accessing the menu  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
When powering the camera ON for the first time the camera will take you through the INITIAL  
CAMERA SETUP.  
Powering the Camera ON  
1) Make sure the batteries have been inserted properly into your digital camera.  
Use 2x AA (1.5v) batteries (not included). Alkaline batteries recommended.  
2) Make sure an SD card has been properly inserted into your camera (until a click sound is  
heard).  
NOTE: After the camera is powered on, an SD icon will appear on the LCD display.  
If you do not see the SD icon on the display, please check if the card was inserted properly.  
3) Press the POWER  
button to turn on the camera.  
Setting the Camera Language  
1) You will first be prompted to select a language for the camera. The Language selection  
menu will appear. Select the language of your choice and press the SET button to confirm  
the selection.  
2) After selecting a language, you will be asked if you would like to continue with the initial  
camera setup. A message will appear: “Continue with Camera Setup?” Select “Yes” to  
continue or “No” to exit the setup.  
NOTE: If you select “No” and decide to leave the camera setup, the camera will be set to its  
default settings. These settings can be adjusted at any time manually through the menus in the  
camera.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Date and Time  
The next step in the initial camera setup is to set the date and time on the camera.  
Set the Date and Time as Desired and press the SET button to confirm the selection and move to  
the next part of the camera setup.  
Setting the ViviLink Default Option  
Once the Date and Time have been set, you will be asked to set the default ViviLink destination  
for photos and videos taken with your camera.  
The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos  
to the social networks of your choice with the accompanying software application.  
1) First you will be asked to choose the default ViviLink social network for Photos. Highlight the  
desired default social network and press the SET button to confirm the selection.  
2) Next you will be asked to choose the default ViviLink social network for Videos. Highlight the  
desired default social network and press the SET button to confirm the selection.  
3) After the ViviLink Video option is confirmed the camera is now ready to use.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main Camera Modes  
Your camera has different modes for the various camera functions.  
You can switch modes by pressing the MODE button on your camera after the camera has been  
powered ON.  
Photo Capture Mode  
Use this mode to capture pictures with your camera.  
This is the default mode when the camera is powered ON.  
To take a picture, aim your camera as desired and press the Shutter button.  
The picture will be automatically saved to your camera‟s memory card.  
To access the various menus for the Photo Capture mode, press the SET button while in  
the Photo Capture mode.  
Video Capture Mode  
Use this mode to capture videos with your digital camera.  
After turning on your camera, press the MODE button once to open the Video Capture  
mode. To take a video, aim your camera as desired and press the Shutter button to start  
the record. A red record indicator will appear on the LCD screen while record is in progress.  
To stop the record, press the Shutter button again. The video will be automatically saved to  
your camera‟s memory card.  
To access the various menus for the Video Capture mode, press the SET button while in the  
Video Capture mode.  
Playback Mode (Photos & Videos)  
Use this mode to view and manage the photos and videos on your camera.  
After turning on your camera, press the MODE button twice to open the Playback mode for  
photos and videos. You can scroll through the photos and videos that you‟ve previously  
taken to view, edit or delete them as desired.  
To access the various menus for the Playback mode for photos and videos, press the SET  
button while in the Playback mode.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera Technical Specifications  
Image Sensor  
CMOS Sensor  
(10M) 3648 X 2736 pixels, (8M) 3264 X 2448 pixels,  
(7M HD) 3648X2048 pixels, (5M) 2592x1944 pixels,  
Image Resolution  
(3M) 2048x1536 pixels, (2M HD) 1920x1080 pixels and  
(VGA) 640x480 pixels  
Video Resolution  
File Format  
Internal Memory  
External Memory  
LCD Display  
Lens  
640X480 pixels (30 fps), 320X240 pixels (30 fps)  
JPEG/AVI  
1 Test Photo Use Only  
SD Card (up to 32GB)  
2.4 Inch TFT  
f=7. mm F3.0  
Zoom  
4X Digital Zoom  
Exposure  
-3.0EV ~ +3.0EV  
White Balance  
ISO  
Auto, Daylight, Cloudy, Fluorescent , Incandescent  
Auto / 100 / 200 / 400  
Auto / Scenery / Portrait / Night Scenery / Night Portrait /  
Scene  
High Sensitivity / Sport / Beach / Party  
Flash  
Auto/Force/Red Eye/Off  
Self-Timer  
Anti-Shake  
Print Photos  
Face Detect  
Smile Capture  
Macro  
2, 5 or 10 second delay  
Yes  
Yes  
Yes  
Yes  
Yes, Manual Switch  
English, French, Spanish, Portuguese, German, Dutch,  
Italian, Russian, Turkish  
Languages  
Interface  
USB 2.0  
System Requirements Windows XP and above / Mac OSX 10.5 and above  
Battery  
2 * AA (1.5V) batteries  
Working Temperature  
0~40C  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Computer System Requirements WINDOWS OS  
To be able to download photos and videos to your PC, you will need the following minimum  
configuration:  
Pentium 4 processor or above with Windows XP service pack 2, Windows Vista or Windows 7  
512 MB RAM, with 100MB of free disk space  
1024 x 768 Recommended screen resolution  
16-bit color or higher display adaptor  
CD-ROM Drive  
QuickTime 6 or higher  
Microsoft Internet Explorer 7 or higher  
Windows Media Player 10 or higher  
Internet connection required  
Computer System Requirements MAC OS  
Macintosh with Intel processor running Mac OS X v10.5 or later  
256 MB RAM, 100 MB free disk space  
Display: 1024 x 768 or higher-resolution monitor  
QuickTime 6 or higher  
Internet connection required  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Powering the Camera On/Off  
Make sure the batteries have been inserted properly into your digital camera. If your camera  
comes with a rechargeable lithium battery, make sure it is fully charged before the first use.  
Powering the camera ON  
Press the Power  
button to turn your camera ON. The camera will be in Photo Capture mode  
to start.  
Powering the camera OFF  
While the camera is on, you can press the Power  
button again at any point to turn your  
camera OFF. You will see a “Goodbye” splash screen and then the camera will power off  
completely.  
NOTE: Your digital camera also has an Auto Power Off feature that will automatically turn off your  
camera after a specific period of time that your camera is left idle. The Auto Power Off settings  
can be set from the Auto Power Off settings menu.  
Changing Camera Mode  
Your camera has three main modes:  
1) Photo Capture Mode - Use this mode to capture photos with your camera.  
2) Video Capture Mode - Use this mode to capture videos with your camera.  
3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos  
you have already taken with your camera.  
When the camera is first powered ON, the Photo Capture Mode will be active. The icons that  
appear on the LCD screen are the best default settings so that you can begin to capture and  
enjoy clear quality photos.  
To change the active camera mode, make sure the camera is powered ON and press the MODE  
button on the back of the camera.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display  
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display  
When in Playback Mode, this icon will display on the top-left corner of the LCD display  
Navigating the Menus  
Each camera mode has a set of menus specific to that mode.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll between the various menus for  
the current mode.  
3) Press the UP or DOWN direction control buttons to highlight the desired menu selection.  
4) Press the SET button to select and save the highlighted menu option.  
5) If the selection can be remembered by the camera, a  
selection icon will appear to the  
right of the selected menu option. Changes made to these options will remain as is until you  
decide to change them again at a later time.  
6) Some menu options are single-use functions that are not remembered by the camera and  
do not display this icon when selected.  
7) At any time you can press the MODE button to exit the menus and return to the previous  
screen.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Photo Capture Mode  
The Photo Capture mode allows you to capture pictures with your digital camera.  
Taking a Picture  
1) While in Photo Capture mode, use the LCD display on the back of the camera to direct the  
camera at the scene you would like to capture.  
2)  
3)  
Click the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired.  
NOTE: The actual shape of these buttons may vary per camera model.  
Click the Shutter button to take the picture.  
4) The picture will automatically be saved to the memory or SD card.  
Taking a Self Portrait Picture  
You can also capture your photos using the flip screen which opens to 180 degrees.  
1) Before taking the photo, ensure that the Macro Switch on the side of the camera is up  
and in the ON position  
. The flower icon will appear on the LCD display.  
2) When you would like to quickly include yourself in the photo, simply flip the LCD display out  
and hold the camera steady facing towards you at arm‟s length (30~45cm).  
3) Make sure you can see yourself on the LCD screen.  
4) Look at the camera lens.  
5) Click the Shutter button to take the picture. It‟s as easy as twist and shoot!  
NOTE: Self Portrait photos taken without Macro mode ON  
may not be properly focused.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Photo Capture Mode Quick Function Buttons  
Your digital camera has a four-directional pad that functions as Quick Function buttons:  
Quick Function Button  
Left  
Function  
Scene Selection Opens the Scene menu  
Flash Options Toggles the Flash options appearing on the LCD  
Up  
Delete Allows you to delete the last photo taken  
Right  
Down  
ViviLink Opens the ViviLink for Photos menu  
Other  
Captures the Picture  
Shutter  
Opens the menu options for Photo Capture Mode  
NOTE: To navigate through the Menus, use the Left, Up,  
Right, and Down directions control buttons.  
Saves your selected menu option  
SET  
Toggles between the Video Capture Mode, Photo Capture  
Mode, and Playback Mode  
MODE  
Exits the menu screen  
Zooms In  
T
Zooms Out  
W
Hide/Show the LCD Icons  
The display of the icons on the LCD screen can be hidden or visible as desired.  
1) Hold the MODE button for 2 seconds to hide the display of the icons on the screen.  
2) Press the MODE button again to redisplay the icons on the screen.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Flash Options  
There are several Flash options available on your camera. The options appear on the Photo  
Capture Mode LCD screen in sequence.  
To change the Flash mode, press the UP Quick Function button until you arrive at your desired  
settings.  
NOTE: The Macro mode must be turned OFF when you want to use the Flash.  
Slide the Macro Switch to the mountain icon . The icon will appear on the LCD display.  
Flash Type  
Description  
No flash will appear.  
Use this when you do not want to activate Flash.  
Forced Off (Default)  
When you want the camera to determine if Flash is needed, select  
Auto Flash.  
A
Auto Flash  
The flash will automatically turn on according to the lighting  
conditions.  
NOTE: An initial flash appears to test your lighting conditions. If  
flash is needed, a second flash will appear upon taking the photo.  
The flash is enabled for each photo.  
NOTE: If you use this option in a well lit environment, your photo  
may be appear too bright/light (overexposed).  
Eliminates the red-eye effect in a photo caused by flash.  
Forced On  
Red Eye  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Macro Switch  
/
Your camera contains a Macro Switch that allows you to manually enable or disable the Macro  
mode on your camera. While using the Macro mode, you can capture images at close range (30  
~ 45 cm). To turn the Macro mode ON, slide the Macro Switch up on the side of your camera to  
the flower icon  
. When enabled, the Macro mode will allow your camera to focus on an object  
that is close to the camera. The flower icon  
Macro mode is on.  
will appear on the LCD and indicates that the  
To turn Macro mode OFF, slide the Macro Switch down on the side of the camera to the mountain  
icon. The icon  
will appear on the LCD. When Macro mode is off, images can be captured  
from 1.5m - infinity.  
NOTE:  
Using Flash, Face Detect and Smile Capture:  
The Macro mode must be turned OFF when you want to use the following features of your  
camera: Flash, Face Detect and Smile Capture.  
Slide the Macro Switch to the mountain icon . The icon will appear on the LCD display.  
Using the Self Portrait feature:  
The Macro mode must be turned ON when you would like to take a Self Portrait photo  
using the flip screen LCD display.  
Slide the Macro Switch up to the flower icon  
. The icon will appear on the LCD display.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Photo Capture Mode Menus  
The following are the menus that appear in your camera‟s Photo Capture Mode:  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Scene Menu  
The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to  
your current environment.  
NOTE: When selecting the HIGH SENSITIVITY Option, by default the camera switches off the  
FLASH automatically (if it‟s ON) to optimize the picture quality. If however, you would like to  
override it and manually turn ON the flash you can do so.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Scene menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Image Resolution Menu  
The Image Resolution menu allows you to choose the desired size of the images taken by your  
camera. Keep in mind that images with a higher resolution will also take up more of your  
camera‟s memory.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Image Resolution  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Image Quality Menu  
The Image Quality menu allows you to select the desired quality level of the images taken by your  
camera. Keep in mind that images with a higher image quality level will also take up more  
memory on your camera.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Image Quality  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Self Timer Menu  
The Self Timer menu allows you to set a delay between the time that the camera‟s Shutter button  
is pressed and the actual capture of the picture.  
This is an optimal feature if you don‟t just want to take the picture but would also like to be in the  
picture yourself. Just set the desired Self Timer delay, press the Shutter button on your camera  
and position yourself in front of the camera as desired.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Self Timer menu.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Anti-Shake Menu  
The Anti-Shake feature reduces image distortion that can be caused by movement of the camera  
while capturing the image.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Anti-Shake menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Face Detect Menu  
The Face Detect feature when set to „On‟ allows the camera to use a subject‟s face as the basis  
for balancing the other colors and focus in the cameras display. This feature is meant to ensure  
that the color and focus of your pictures will be consistently sharp and high-quality.  
NOTE: To properly use the Face Detect option, please ensure the following:  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Macro mode off - Face Detect will not work if the camera is in Macro mode. Push the Macro  
Switch on the side of the camera for the mountain icon to appear on the LCD.  
Anti-Shake - Ensure that the Anti-Shake option is set to „On‟. The Anti-Shake option is „On‟ by  
default when you start using your camera and assists you in properly focusing the image.  
Distance from the camera – The subject‟s face must be no further than 8 to 9 feet (3.5  
meters) from the camera and the face must cover at least 20% (1 / 5th) of the picture as „seen‟  
on the LCD screen.  
Facing the camera - The face of the subject(s) you are photographing must be facing the  
camera and must hold the pose for at least 4 to 5 seconds until the green square(s) appears  
around the subject`s face.  
Face Detect will not work with a side shot of the subject`s head.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Face Detect  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Smile Capture Menu  
The Smile Capture feature when set to „On‟ allows the camera to automatically take a picture  
when it detects that a subject in the picture is smiling.  
NOTE: To properly use the Smile Capture feature, please ensure the following:  
Macro mode off Smile Capture will not work if the camera is in Macro mode. Push the  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Macro Switch on the side of the camera for the mountain  
icon to appear on the LCD.  
Anti-Shake - Ensure that the Anti-Shake option is set to „On‟. The Anti-Shake option is „On‟ by  
default when you start using your camera and assists you in properly focusing the image.  
Distance from the camera The subject‟s face must cover a majority of the picture as „seen‟  
on the LCD screen.  
Facing the camera - The face of the subject(s) you are photographing must be facing the  
camera and must hold the pose for at least 4 to 5 seconds until the green square(s) appears  
around the subject`s face.  
Once a smile is detected the camera will automatically take the picture.  
Smile Capture will not work with a side shot of the subject`s head.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Smile Capture  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
White Balance Menu  
The White Balance feature allows your camera to adjust the coloring of the captured images  
depending on the type of light source in the current environment.  
Properly adjusting the White Balance setting to match your current environment will allow the  
camera to properly balance the colors in the images that are taken with your camera.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the White Balance  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Color Effect Menu  
You can choose to add a color effect to the images taken with your camera.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Color Effect  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Multi SnapShots Menu  
When enabled, the Multi SnapShots feature allows you to take five rapid snapshots in a row with  
a single click of the shutter button.  
This feature can be effective when trying to capture a particular moment in a sporting event or  
other scenes with quick movements.  
1) Press the SET button to open the menus for the current mode.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Multi SnapShots  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Image Sharpness Menu  
You can set the level of sharpness in the images taken with your camera. The sharpness level  
dictates if the edges of objects in the image are more or less distinct.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Image Sharpness  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Light Exposure Menu  
The Light Exposure setting helps you control the amount of light that enters your camera‟s lens.  
This setting should be adjusted when the environment is lighter or darker than normal.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When the environment has more light than is needed, reduce the exposure setting (by using the  
negative - count) to reduce the amount of light allowed into the lens by your camera.  
If the environment has less light (darker) than is needed, increase the exposure setting (by using  
the positive + count) to increase the amount of light allowed into the lens by your camera.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Light Exposure  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
ISO Menu  
The ISO menu allows you to set the level of sensitivity that your camera has to light in the  
surrounding environment. When the ISO level is increased, the image sensor in your camera will  
be more sensitive to light and allow you to capture images in lower-light situations. The higher  
sensitivity to light however, may reduce the quality of the images that are taken.  
When the ISO is reduced, the image sensor in your camera will be less sensitive to light and will  
optimize the image quality in environments with bright lighting.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the ISO menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8) An icon reflecting your selection will display on the LCD screen  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Metering Menu  
The Metering setting will affect how your camera focuses when capturing an image. Depending  
on your selection, the camera will be more sensitive to focusing on particular areas in the display  
and adjust the image color and lighting accordingly.  
Center Averages the light metered from the entire frame, but giving greater weight to the  
subject in the center  
Multi Used in standard conditions the camera divides and adjusts the settings of the image into  
several zones for light metering such as complex light conditions, position of subject, brightness,  
background, direct light and scenes  
Spot Meters the area within the spot point frame at the center of the LCD to set the exposure  
on the subject in the center of the monitor.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Metering menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Language Menu  
You can select your camera‟s language setting by selecting the desired language from the  
Language menu.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Language menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Date/Time Menu  
When you capture an image with your camera, the image will include a time stamp with the date  
and time that the image was taken.  
The Date/Time menu allows you to set your camera‟s date and time as desired. You can also  
disable the timestamp for future images that will be taken with your camera.  
On The timestamp will appear on photos taken  
Off The date stamp will not appear on photos taken  
To Enable/Disable the Timestamp:  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Set the Date and Time:  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.  
3) Press the UP or DOWN direction control buttons to highlight the “Date Setup” menu option,  
then press the SET button to select the option.  
4) The Date Setupsubmenu will open.  
5) Scroll through the window with the RIGHT and LEFT navigation buttons.  
6) For each field in the menu, use the UP and DOWN navigation buttons to set the date and  
time.  
7) When you have finished setting the date and time, press the SET button to save your  
settings and return to the previous mode.  
8) Press the MODE button to exit the menu without saving your settings and return to your  
previous screen.  
Silent Mode Menu  
You have the option of activating the camera‟s Silent mode to disable all of the sound effects  
(except for during the Self Timer countdown) that the camera emits when performing camera  
functions.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Silent Mode  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Power Off Menu  
You can use the Auto Power Off feature in order to conserve you camera‟s battery life. The  
designated time represents when your camera will automatically power off.  
When the camera sits idle for the designated period of time, the camera will shut off completely  
and will need to be powered on again with the power button before the next use.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Auto Power Off  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Frequency Menu  
The options in the Frequency menu represent the frequency of the electrical current in  
fluorescent lighting sources in your locale. If your camera is set to a frequency that does not  
match your country‟s electric current, you may see waves on the images taken by your camera.  
50Hz UK, Europe and Australia  
60Hz US, Canada and South America  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Frequency menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item  
6) Press the LEFT or RIGHT button to select the next menu item.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Format Memory Card Menu  
You can use the Format Memory Card menu to delete all of the content that is currently on your  
camera‟s memory card.  
Keep in mind that formatting the memory card will permanently delete all of the content on  
your camera‟s memory card.  
This option will delete all of the content at one time. If you would like to delete individual images,  
use the delete menu in the camera‟s Playback mode.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Format Memory  
Card menu.  
3) Press the UP or DOWN direction control buttons to highlight the menu options.  
4) To exit without formatting the card, select „Cancel‟ and press the SET button.  
5) To proceed with the format, select “Yes” and press the SET button.  
6) You will be asked to confirm the formatting of the memory card.  
Select “No” to exit without formatting.  
Select “Yes” and press the SET button to begin the format.  
The memory card will be completely formatted.  
Firmware (Factory Default Settings) Menu  
Use this menu to view the Firmware version on your camera or to reset your camera settings to  
the Factory Default Settings.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware menu.  
3) The “Default Setting” is selected.  
4) Press the SET button to reset the camera to the factory default settings.  
5) You will be asked to confirm the resetting to the factory default settings.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6) If you would like to proceed with the reset, select „Yes‟ and press the SET button to  
confirm.  
The settings will be reset.  
You will automatically exit the menu and return to the previous mode with the digital camera  
settings set to the Factory Default Settings.  
7) If you would like to exit the format, select „No‟ and press the SET button.  
You will automatically exit the menu and return to the previous mode.  
NOTE: After RESETTING to the default settings, it is recommended to select your system  
Language, Date/Time and ViviLink for Photos and Videos. If you do not, the next time your  
camera is powered on, you will be prompted to define those settings.  
Photo Playback Mode  
When you first turn on the camera, the camera will be in Photo Capture mode by default. Press  
the MODE button twice to open the Playback Mode. The playback mode will allow you to review  
and edit photos and videos that you‟ve already taken with you camera.  
Viewing Photos on Your Camera  
1) Select your Photo:  
Once in Playback mode, press LEFT or RIGHT direction buttons to scroll through the  
images on your digital video recorder‟s memory card until you find the image you would  
like to view.  
Each captured image (videos and photos) will display on the LCD screen.  
Photos will appear with a JPGicon on the top left of the LCD screen.  
2) Zooming In/Out of your selected Photo:  
Press the T / Zoom In button to Zoom In and magnify the selected photo.  
Use the UP / DOWN / LEFT / RIGHT direction buttons to navigate around the photo.  
Press the W/Zoom Out button to Zoom Out of the selected photo.  
Use the UP / DOWN / LEFT / RIGHT direction buttons to navigate around the photo  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Thumbnail View  
Easily navigate and select the image you wish to view by using the Thumbnail View.  
The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction  
buttons to scroll and select images from the thumbnails.  
1) Press the W/Zoom Out button  
2) All the images on your camera will appear in the Thumbnail View.  
3) Use the UP / DOWN / LEFT / RIGHT direction buttons to scroll and select the image you  
wish to view.  
4) Press the SET button to enlarge the image full size.  
Photo Playback Mode Quick Function Buttons  
Your digital camera has a four-directional pad that functions as Quick Function buttons.  
Quick Function Button  
Left  
Function  
Displays the PREVIOUS image  
Views all the Photos as a Slide Show with 3, 5 or 10 second  
intervals  
Up  
(to exit the Slide Show, press any button)  
Displays the NEXT image  
Right  
Down  
ViviLink Opens the ViviLink for Photos menu  
Other  
Opens Thumbnail View  
To Navigate in the Thumbnail View: press the LEFT, UP,  
RIGHT, DOWN direction buttons  
W/Zoom out  
To select a JPG in the Thumbnail View: press the SET button  
Opens the menu options for Photo Capture Mode  
NOTE: To navigate through the Menus, use the LEFT, UP,  
RIGHT, and DOWN directions control buttons.  
Saves your selected menu option  
SET  
Toggles between the Video Capture Mode, Photo Capture  
Mode, and Playback Mode  
MODE  
Exits the menu screen  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Photo Playback Mode Menus  
The following are the menus that appear in your camera‟s Photo Playback Mode:  
Delete Menu  
While in the Playback Mode, you can delete pictures from your camera through the Delete menu.  
1) View the photo you would like to delete.  
2) Press the SET button to open the menus for the current mode.  
3) Press the LEFT or RIGHT direction control buttons to scroll and select the Delete menu.  
4) Press the UP or DOWN direction control buttons to scroll through the menu options.  
5) To delete the selected photo, select “Delete This Photo?and press SET button.  
You will be asked to confirm the deletion of the photo.  
If you would like to proceed with deleting the current image: select „Yes‟ and press the  
SET button to confirm. The photo will be deleted and you will exit the menu and return to  
the Playback mode.  
If you do not want to delete the current image, select „No‟ and press the SET button. The  
photo will not be deleted and you will exit the menu and return to the Playback mode.  
6) To delete all the images (videos and photos) you have saved on your SD Memory card,  
select „Delete All Images‟ and press the SET button.  
If you would like to proceed with deleting all the videos and photos, select „Yes‟ and press  
the SET button to confirm.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
All of your images will be permanently deleted.  
A blank „No Files Exist‟ screen will appear.  
Press the MODE button to exit the „No Files Exist‟ screen and return to Photo Capture  
mode.  
Remember: All images will be deleted except images that are Protected/Locked. To  
delete a locked image, first unlock the image, then select delete.  
If you do not want to delete all of your videos and photos, select „No‟ and press the SET  
button. All images will remain on your SD card and you will exit the menu and return to  
the Playback mode.  
ViviLink Menu  
The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos  
to the social networks of your choice with the accompanying Vivitar Experience Image Manager  
application.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the ViviLink menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) An icon will appear on the image with the selected ViviLink destination site when you return  
to the Playback display.  
7) Remember that the ViviLink feature is deactivated by default. A ViviLink destination will only  
be assigned to a photo or video if you manually set it from this menu or from the ViviLink  
menu in Capture mode (accessible with the ViviLink Quick-Function button in Capture  
mode).  
8) Changing the ViviLink destination site will also make the selected site the new default  
ViviLink option. A new default can be selected at any time through this menu.  
9) Press the LEFT or RIGHT button to select the next menu item.  
10) Press the MODE button to exit the menu and return to your previous mode.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rotate Menu  
Use this menu to rotate the pictures that you‟ve taken with your camera.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Rotate menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5) The selected picture will now appear rotated in the Playback mode.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
Crop Image Menu  
You can crop any picture on your camera with the Crop feature.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.  
3) Press the UP or DOWN to highlight the Crop option.  
4) Press the SET button to open the Crop option.  
5) The Crop window will open on the selected picture.  
6) Use the directional buttons to move the Crop box to define the desired crop area.  
7) Use the W/T Zoom buttons on the camera to enlarge or shrink the Crop box.  
8) When you are ready to crop, press the Shutter button.  
9) When you see the cropped picture appear, press the Shutter button again to save or press  
the SET button to cancel and return to the previous menu.  
10) If you selected to save, the cropped picture will now be saved as a new picture to your  
memory card.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Protect/Lock Menu  
Pictures and Videos taken with your camera can be protected or “locked” to prevent any deletion  
or alteration being made to the files.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5) Press the LEFT or RIGHT button to select the next menu item.  
6) Press the MODE button to exit the menu and return to your previous mode.  
7) Any image that is locked will display a lock symbol on the LCD screen when viewing that  
image in the playback mode. Photos that are not locked will not display the lock symbol.  
8) Remember that you cannot delete or edit photos while they are locked.  
Print This Photo Menu  
You can use the Print Photos menu to print the photos that are on your camera directly to a  
Pictbridge compatible printer.  
1) Scroll through your pictures and find the one you would like to print.  
2) Press the SET button to open the menus for the current mode.  
3) Press the LEFT or RIGHT direction control buttons to scroll and select the Print This Photo  
menu.  
4) Press the UP or DOWN direction control buttons to scroll through the menu options.  
5) Press the SET button when highlighting the “Print This Photo” option to print the selected  
photo.  
6) You will be asked to connect the camera to the Pictbridge printer.  
7) Connect the USB cable provided in the package from the camera to the Pictbridge port of  
the printer.  
8) Once connected, follow the instructions on the printer to proceed with the printing process.  
9) Select the “Cancel” option to exit the menu and return to the previous mode.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Slide Show Menu  
You can view a slide show of all the pictures taken with your camera by pressing the UP Quick  
Function button while in Playback mode.  
The Slide Show menu allows you to set the interval length of time that each picture will display  
during the slideshow.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Slide Show  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) While in Playback mode, press the UP Quick Function button to initiate the Slide Show.  
Press any button to exit the Slide Show and return to the previous mode.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Capture Mode  
The Video Capture Mode allows you to capture videos with your digital camera. When the  
camera is first powered ON, the camera will be in Photo Capture Mode. Press the MODE button  
once to access the Video Capture Mode.  
Taking a Video  
1) While in Video Capture Mode use the LCD display on the back of the camera to direct the  
camera at the scene you would like to capture.  
2)  
Click the T/Zoom In and W/Zoom Out buttons to better set the camera display if  
desired.  
NOTE: The actual shape of these buttons may vary per camera model.  
3)  
Press the Shutter button on the top of the camera to START the video capture.  
4) You will see a red icon at the top of the LCD indicating that the record is in progress.  
5) To STOP the video record, press the Shutter button again.  
6) The video will automatically be saved to the camera‟s memory or SD card.  
7) You can also capture your videos using the Flip Screen.  
When you would like to quickly and easily include yourself in the video, simply flip the LCD  
display out and hold the camera facing towards you. Make sure you can see yourself within  
the scene on the LCD screen, look at the lens, then click the Shutter button to begin  
recording.  
It‟s as easy as twist and shoot!  
NOTE: Before taking the video, ensure that the Macro Switch on the side of the camera is  
up and in the ON position  
. The flower icon will appear on the LCD display.  
may not be properly focused.  
Videos using the Flip screen without Macro mode ON  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Video Capture Mode Quick Function Buttons  
Your digital camera has a four-directional pad that functions as Quick Function buttons.  
Quick Function Button  
Left  
Function  
Scene Selection Opens the Scene menu  
Light Exposure - Opens the Light Exposure menu  
Up  
Delete Allows you to delete the last video taken  
Right  
Down  
ViviLink Opens the ViviLink for Videos menu  
Other  
STARTS/STOPS the video capture  
Shutter  
Opens the menu options for Photo Capture Mode  
NOTE: To navigate through the Menus, use the Left, Up,  
Right, and Down directions control buttons.  
Saves your selected menu option  
SET  
Toggles between the Video Capture Mode, Photo Capture  
Mode, and Playback Mode  
MODE  
Exits the menu screen  
Zooms In  
T
Zooms Out  
W
Hide/Show the LCD Icons  
The display of the icons on the LCD screen can be hidden or visible as desired.  
1) Hold the MODE button for 2 seconds to hide the display of the icons on the screen.  
2) Press the MODE button again to redisplay the icons on the screen.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Capture Mode Menus  
The following are the menus that appear in your camera‟s Video Capture Mode:  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Scene Menu  
The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to  
your current environment.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Scene menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Image Size Menu  
The Image Size menu allows you to choose the desired size of the images taken by your camera.  
Keep in mind that images with a larger size will also take up more of your camera‟s memory.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Image Size  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Image Quality Menu  
The Image Quality menu allows you to select the desired quality level of the images taken by your  
camera. Keep in mind that images with a higher image quality level will also take up more  
memory on your camera.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Image Quality  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
White Balance Menu  
The White Balance feature allows your camera to adjust the coloring of the captured images  
depending on the type of light source in the current environment.  
Properly adjusting the White Balance setting to match your current environment will allow the  
camera to properly balance the colors in the images that are taken with your camera.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the White Balance  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Color Effect Menu  
You can choose to add a color effect to the images taken with your camera.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Color Effect  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Image Sharpness Menu  
You can set the level of sharpness in the images taken with your camera. The sharpness level  
dictates if the edges of objects in the image are more or less distinct.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Image Sharpness  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Light Exposure Menu  
The Light Exposure setting helps you control the amount of light that enters your camera‟s lens.  
This setting should be adjusted when the environment is lighter or darker than normal.  
When the environment has more light than is needed, reduce the exposure setting (by using the  
negative - count) to reduce the amount of light allowed into the lens by your camera.  
If the environment has less light (darker) than is needed, increase the exposure setting (by using  
the positive + count) to increase the amount of light allowed into the lens by your camera.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Light Exposure  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
ISO Menu  
The ISO menu allows you to set the level of sensitivity that your camera has to light in the  
surrounding environment. When the ISO level is increased, the image sensor in your camera will  
be more sensitive to light and allow you to capture images in lower-light situations. The higher  
sensitivity to light however, may reduce the quality of the images that are taken.  
When the ISO is reduced, the image sensor in your camera will be less sensitive to light and will  
optimize the image quality in environments with bright lighting.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select the desired option.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Metering Menu  
The Metering setting will affect how your camera focuses when capturing an image. Depending  
on your selection, the camera will be more sensitive to focusing on particular areas in the display  
and adjust the image color and lighting accordingly.  
Center Averages the light metered from the entire frame, but giving greater weight to the  
subject in the center  
Multi Used in standard conditions the camera divides and adjusts the settings of the image into  
several zones for light metering such as complex light conditions, position of subject, brightness,  
background, direct light and scenes  
Spot Meters the area within the spot point frame at the center of the LCD to set the exposure  
on the subject in the center of the monitor.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Metering menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) An icon reflecting your selection will display on the LCD screen.  
9) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Menu  
You can select your camera‟s language setting by selecting the desired language from the  
Language menu.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Language menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Date/Time Menu  
When you capture an image with your camera, the image will include a time stamp with the date  
and time that the image was taken.  
The Date/Time menu allows you to set your camera‟s date and time as desired. You can also  
disable the timestamp for future images that will be taken with your camera.  
On The timestamp will appear on photos taken.  
Off The date stamp will not appear on photos taken.  
To Enable/Disable the Timestamp:  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) Remember that this setting will be saved by your camera until you manually change the  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
setting or restore the camera‟s default factory settings.  
To Set the Date and Time:  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.  
3) Press the UP or DOWN direction control buttons to highlight the “Date Setup” menu option  
then press the SET button to select the option.  
4) The “Date Setup” submenu will open.  
5) Scroll through the window with the RIGHT and LEFT navigation buttons.  
6) For each field in the menu, use the UP and DOWN navigation buttons to set the date and time.  
7) When you have finished setting the date and time, press the SET button to save your  
settings and return to the previous mode.  
8) Press the MODE button to exit the menu without saving your settings and return to your  
previous screen.  
Auto Power Off Menu  
You can use the Auto Power Off feature in order to conserve you camera‟s battery life. The  
designated time represents when your camera will automatically power off.  
When the camera sits idle for the designated period of time, the camera will shut off completely  
and will need to be turned on again with the power button before the next use.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Auto Power Off  
menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequency Menu  
The options in the Frequency menu represent the frequency of the electrical current in  
fluorescent lighting sources in your locale. If your camera is set to a frequency that does not  
match your country‟s electric current, you may see flickering or waves on the images taken by  
your camera.  
50Hz UK, Europe and Australia  
60Hz US, Canada and South America  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Frequency menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select and save the desired option.  
5)  
A
selected option icon will appear on the selected item.  
6) Press the LEFT or RIGHT button to select the next menu item.  
7) Press the MODE button to exit the menu and return to your previous mode.  
8) Remember that this setting will be saved by your camera until you manually change the  
setting or restore the camera‟s default factory settings.  
Format Memory Card Menu  
You can use the Format Memory Card menu to delete all of the content that is currently on your  
camera‟s memory card.  
Keep in mind that formatting the memory card will permanently delete all of the content on  
your camera‟s memory card.  
This option can only delete all of the content at one time. If you would like to delete individual  
images, use the delete menu in the camera‟s Playback mode.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Format Memory  
Card menu.  
3) Press the UP or DOWN direction control buttons to highlight the menu options.  
4) To exit without formatting the card, select „Cancel‟ and press the SET button.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5) To proceed with the format, select “Yes” and press the SET button.  
You will be asked to confirm the formatting of the memory card.  
Select “No” to exit without formatting.  
Select “Yes” and press the SET button to begin.  
The memory card will be completely formatted.  
Firmware (Factory Default Settings) Menu  
Use this menu to view the Firmware version on your camera or to reset your camera settings to  
the Factory Default Settings.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware menu.  
3) The “Default Setting” is selected.  
4) Press the SET button to reset the camera to the factory default settings.  
5) You will be asked to confirm the resetting to the factory default settings.  
6) If you would like to proceed with the reset, select „Yes‟ and press the SET button to  
confirm.  
The settings will be reset.  
You will automatically exit the menu and return to the previous mode with the digital camera  
settings set to the Factory Default Settings.  
7) If you would like to exit the format, select „No‟ and press the SET button.  
You will automatically exit the menu and return to the previous mode.  
Note: After RESETTING to the default settings, it is recommended to select your system  
Language, Date/Time and ViviLink for Photos and Videos. If you do not, the next time your  
camera is powered on, you will be prompted to define those settings.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Playback Mode  
When you first turn on the camera, the camera will be in Photo Capture mode by default. Press  
the MODE button twice to open the Playback Mode. The Playback Mode will allow you to review  
and edit photos and videos that you‟ve already taken with you camera.  
Playing Videos on Your Camera  
1) Select your Video:  
Once in Playback mode, press LEFT or RIGHT direction buttons to scroll through the  
images on your digital video recorder‟s memory card until you find the video you would  
like to view.  
Each captured image (videos and photos) will display on the LCD screen.  
Videos will appear with an „AVIicon on the top left of the LCD screen.  
2) Play your selected video:  
Press the Shutter button to START playing the video.  
Press the Shutter button again to PAUSE the video and to continue playing and pausing  
as needed.  
While the Video is playing all the icons on the top section of the LCD disappear.  
To fully STOP the video and restore the icons to the LCD, press the UP button.  
Thumbnail View  
Use the W/Zoom Out button to display the images on your camera in Thumbnail View. The  
images on your camera will be displayed in a 3 X 3 matrix where you can scroll and select images  
from the thumbnails.  
1) Press the W/Zoom Out button  
All the images on your camera will appear in the Thumbnail View.  
2) Use the UP / DOWN / LEFT / RIGHT direction buttons to scroll and select the image you  
wish to view.  
3) Press the SET button to enlarge the image full size.  
4) Once the selected video is full size you can play and view the video.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Video Playback Mode Quick Function Buttons  
Your digital camera has a four-directional pad that functions as Quick Function buttons.  
Quick Function Button  
Left  
Function  
Displays the PREVIOUS image  
STOPS a playing video  
Up  
Displays the NEXT image  
Right  
Down  
ViviLink Opens the ViviLink for Videos menu  
Other  
PLAYS and PAUSES a playing video  
Shutter  
Opens Thumbnail View  
To Navigate in the Thumbnail View: press the LEFT, UP,  
RIGHT, DOWN direction buttons  
W/Zoom out  
To select a JPG in the Thumbnail View: press the SET button  
Opens the menu options for Photo Capture Mode  
NOTE: To navigate through the Menus, use the LEFT, UP,  
RIGHT, and DOWN directions control buttons.  
Saves your selected menu option  
SET  
Toggles between the Video Capture Mode, Photo Capture  
Mode, and Playback Mode  
MODE  
Exits the menu screen  
Video Playback Mode Menus  
The following are the menus that appear in your camera‟s Video Playback Mode:  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Delete Menu  
While in the Playback mode, you can delete videos from your camera using the delete menu.  
1) View the image you would like to delete.  
2) Press the SET button to open the menus for the current mode.  
3) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.  
4) Press the UP or DOWN direction control buttons to scroll through the menu options.  
5) To delete this one video, select “Delete This Video”.  
6) To delete all the images (including all unlocked photos and videos) on your camera‟s  
memory card, select “Delete All Images”.  
7) Press the SET button to select the desired option.  
8) You will be asked to confirm your selection.  
9) The videos will be deleted as desired.  
ViviLink Menu  
The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos  
to the social networks of your choice with the accompanying Vivitar Experience Image Manager  
application.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select the desired option.  
5)  
A
selected option icon will appear on the selected item  
6) Press the MODE button to exit the menu and return to your previous mode.  
7) An icon will appear on the image with the selected ViviLink destination site.  
8) Remember that the ViviLink feature is deactivated by default. A ViviLink destination will only  
be assigned to a photo or video if you manually set it from this menu or from the ViviLink  
menu in Capture mode (accessible with the ViviLink Quick-Function button in Capture  
mode).  
9) Changing the ViviLink destination site will also make the selected site the new default  
ViviLink option. A new default can be selected at any time through this menu.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Protect/Lock Menu  
Pictures and Videos taken with your camera can be protected or “locked” to prevent any deletion  
or alteration being made to the files.  
1) Press the SET button to open the menus for the current mode.  
2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.  
3) Press the UP or DOWN direction control buttons to scroll through the menu options.  
4) Press the SET button to select the desired option.  
5) Press the MODE button to exit the menu and return to your previous mode.  
6) Any image that is locked will display a lock symbol on the LCD screen when viewing that  
image in the playback mode. Videos that are not locked will not display the lock symbol.  
7) Remember that you cannot delete locked videos.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Software  
You must be connected to the internet to install and run the Vivitar Experience Image  
Manager software.  
1) Insert the installation CD into your CD-ROM drive. The installation screen should  
automatically open.  
2) On PC: The Vivitar Experience Image Manager Installer window appears. If the window  
does not appear, open the application‟s CD/DVD drive and click on “Setup.exe” to launch  
the installer.  
3) On Macintosh: Click the icon that appears on the desktop to install the Vivitar Experience  
Image Manager.  
4) If you do not have internet access at the time of inserting the CD-ROM, connect to the  
internet and then click the “Install Vivitar Experience Image Manager” button to begin the  
installation.  
NOTE: If you do not have internet access, you can still download media from the camera. Click  
the “How to transfer photos and videos from my camera to my computer” button for instructions.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5) If you have internet access, the “Choose your language” window opens, choose your  
language and click “Next” to open the next window.  
6) Select your camera model from the list and click “Next” to open the next window.  
7) Click “Next” to confirm your camera model selection and to install the application.  
8) Please wait while the application is being installed on your computer.  
9) Please review the license terms.  
On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click  
“Next” to continue.  
10) On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where  
the program will be installed, and then click “Install”.  
11) Please wait while the application continues the installation process on your computer.  
12) On PC: Click the “Close” button when the installation is complete.  
Click the “Launch Vivitar Experience Image Manager” to open the application.  
13) On Macintosh: Click the “Quit” button when the installation is complete.  
Click the “Launch Vivitar Experience Image Manager” to open the application.  
14) If you close the application you can run the Vivitar Experience Image Manager from the  
Programs (PC) or Applications (Mac) menu on your computer.  
Connecting the Camera to the Computer  
1) Use the USB cable that came with your camera to connect your camera to your computer.  
2) Power the camera ON.  
3) The first time you connect the device to the computer you will have to wait a few seconds  
until the computer recognizes the device.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Photos and Videos from your Camera to Your Computer  
An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will  
cancel the transfer of any files on their way to your computer.  
1) Select the “Get Images” button from the Main menu.  
2) The “Get Images from device” window opens.  
3) You can select to download photos, videos or both.  
4) Select your camera (removable disk) from the device window. If your camera is the only  
USB device connected then it will be selected automatically.  
5) Select a location on the computer where to place the new photo and video files.  
6) Add the new photo and video files to albums if desired.  
7) Select to remove the media files from the selected device (removable disk) after the import.  
8) Click the “Get Images” button to transfer the photos and videos from your camera to your computer.  
9) A media download progress bar appears on the bottom left showing the number of media  
files downloading to your computer. A message appears when the download is complete.  
10) The photo and video files that you selected are now downloaded to your computer to the  
selected folder and albums ready for your use.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Get started!  
Using the Vivitar Experience Image Manager, you can:  
Upload and manage photos and videos to and from the most popular photo sharing and social  
networking sites - Facebook, Flickr, Picasa, MySpace, Photobucket, Twitpic, Twitgoo and  
YouTube  
Seamlessly transfer photos and videos from one social network to another  
Organize your images by creating offline and online albums  
Edit images using automatic and manual tools  
Use automatic “Geotagging” with built in Google Maps  
For more details on how to use the Vivitar Experience Image Manager open the Help file or  
click the “Take the Tour” button on the application`s Home page.  
Transfer media from my camera to my computer manually (Using Windows)  
1) Use the USB cable that came with your camera to connect your camera to your computer.  
2) MSDC appears on the LCD.  
3) A window appears with a list of options, select Open folder to view filesand click OK.  
4) Open the DCIM folder and the folder inside to view the media files.  
5) Select the media and copy the files from this folder into your computer. Optionally, select the  
files and choose Copy from the Edit menu. Then select a folder and choose Paste from the  
Edit menu.  
6) We recommend that you copy the images into the Pictures/My Pictures folder and the  
videos into the Videos/My Videos folder.  
7) Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on  
their way to your computer.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Transfer media from my camera to my computer manually (Using Macintosh)  
1) Use the USB cable that came with your camera to connect your camera to your computer.  
2) MSDC appears on the LCD.  
3) The camera‟s device icon appears on the desktop.  
4) Click on the device icon and open the DCIM folder and the folder inside to view the media  
files.  
5) Select the files and drag them into your computer. Optionally, select the files and choose  
Copy from the Finder‟s Edit menu. Then select a folder and choose Paste from the Edit  
menu.  
6) We recommend that you copy the images into the Pictures folder and the videos into the  
Movies folder.  
7) Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on  
their way to your computer.  
Camera Maintenance  
The digital camera is a delicate device. Please handle your camera with care to avoid damaging it.  
Do not expose your camera to heat sources.  
Do not use you camera in wet or moist conditions.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sakar Warranty Card  
This warranty covers for the original consumer purchaser only and is not transferable. Products  
that fail to function properly UNDER NORMAL USAGE, due to defects in material or  
workmanship will be repaired at no charge for parts or labor for a period of one year from the time  
of purchase.  
What Is Not Covered By Warranty:  
Damages or malfunctions not resulting from defects in material or workmanship and damages or  
malfunctions from other than normal use, including but limited to, repair by unauthorized parties,  
tampering, modification or accident.  
What To Do When Service Is Required:  
When returning your defective product (postage pre-paid) for service, your package should  
include:  
1) Copy of original bill of sale  
2) A detailed written description of the problem.  
3) Your return address and telephone number (Daytime)  
MAIL TO ADDRESS BELOW:  
Sakar US  
Sakar UK/Europe  
Sakar Australia  
Sakar International  
Attention: Service Department  
195 Carter Drive  
Edison, NJ  
Attention: Service Department  
2D, Siskin Parkway East  
4020 Middlemarch Business Park  
Coventry, CV3 4PE  
Return faulty camera  
to the Refund  
Counter at the store  
where purchased  
08817  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Technical Support  
For technical support issues please visit our website at www.vivitar.com. You can find manuals,  
software and FAQ‟s at the website. Can‟t find what you are looking for? E-mail us at  
[email protected] and one of our technical support team members will answer your  
questions. For phone support in the US please call 1-800-592-9541, in the UK call 0800 917 4831,  
in Australia call 1800-006-614. If you would like to call from anywhere else, please visit  
www.vivitar.com for your local toll free number.  
Troubleshooting  
Q: I have taken photos and selected the “Get Images” button. I get a message that the  
images were successfully transferred but the photos do not appear on my computer.  
What do I do?  
First ensure that you have in fact taken photos. Press the Shutter button to take some sample  
photos and then try downloading them again.  
With test photos if the camera powers off before you upload them to the computer the photos are  
not stored in the camera`s memory. These photos should be uploaded quickly before the camera  
powers off. If the photos are saved to the SD memory card then all the photos should appear.  
Q: How do I make sure I don't lose important pictures?  
This camera requires an SD card for normal use. If the camera powers off nothing will happen to  
the images stored on the SD memory card. We recommend always downloading your photos to  
your computer as soon as possible to prevent unintentional data loss.  
Q: I deleted images using the Vivitar Experience Image Manager. The images were also  
deleted from my computer. How do I recover images that I accidently deleted?  
All images deleted using the Vivitar Experience Image Manager are sent to your computer`s  
Recycle or Trash Bin and can be retrieved from there.  
VX028EN-19810-TA FW_1500FUGNMH41F26 FW_1500FUGNMH41F26SA1  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   

Tascam Recording Equipment DP 008ex User Manual
Technics DVD Player DVD A10 User Manual
Techno Source Handheld Game System 31060 User Manual
Toshiba Home Security System IKS D207 User Manual
Toshiba Rice Cooker RC 10NMF User Manual
Triarch Indoor Furnishings 31086 32 User Manual
Ultra Products Network Card FlyDrive User Manual
Viking Gas Grill F21032 User Manual
VIPowER CD Player VPM 6228H User Manual
VTech Telephone 921 ADL User Manual