User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Page
System Requirements
1.
2. Package Contents ----------------------------------------------------------------
Quick Start
-----------------------------------------------------------
1
1
2
4
6
7
7
7
8
8
9
3.
4. Name of Parts ----------------------------------------------------------------------
Display Information
--------------------------------------------------------------------------
5.
--------------------------------------------------------------
6. Getting Started ---------------------------------------------------------------------
• Installing Camera Batteries ----------------------------------------------------
• Inserting SD Card (Optional) --------------------------------------------------
• Turning On the Camera ---------------------------------------------------------
• Setting the Date, Time and Date Stamp ------------------------------------
• Power Saving ----------------------------------------------------------------------
7. Taking Pictures --------------------------------------------------------------------- 10
• Taking a Picture ------------------------------------------------------------------- 10
• Taking Continuous Pictures ---------------------------------------------------- 10
• Using Digital Zoom --------------------------------------------------------------- 11
• Using Flash Light ----------------------------------------------------------------- 11
• Setting Picture Quality ----------------------------------------------------------- 12
• Adjusting the Exposure ----------------------------------------------------------- 13
• Taking the Picture in Self-timer Mode ----------------------------------------- 13
8. Taking Videos ----------------------------------------------------------------------- 14
• Taking a Video --------------------------------------------------------------------- 14
9. Reviewing Pictures and Videos ----------------------------------------------- 15
• Reviewing Pictures and Videos ----------------------------------------------- 15
• Viewing Six Pictures ------------------------------------------------------------- 15
• Using Slide Show ----------------------------------------------------------------- 16
• Magnifying Pictures -------------------------------------------------------------- 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Page
• Selecting Pictures for Printing (DPOF Print Settings) ------------------- 17
Deleting Pictures and Videos
10.
------------------------------------------------ 18
• Deleting Single Picture or Video ---------------------------------------------- 18
• Deleting All Pictures and Videos ---------------------------------------------- 18
• Formatting Internal Memory or SD Card ------------------------------------ 19
11. Customizing Your Camera Settings ---------------------------------------- 20
• Capture Function Menu ------------------------------------------------------- 20
• Playback Function Menu ------------------------------------------------------ 25
12. Installing Your Camera Driver and Software -------------------------------- 27
13. Uninstalling Software ------------------------------------------------------------ 28
• Uninstalling Software ------------------------------------------------------------ 28
• Uninstall Camera's Driver
------------------------------------------------------- 28
14. Mass Storage & Direct Print ---------------------------------------------------- 29
15. Downing Images to Your Computer -------------------------------------------- 30
16. ArcSoft PhotoImpression 5 --------------------------------------------------- 31
17.ArcSoft VideoImpression 2 -------------------------------------------------------- 32
18. Using the Camera in PC Cam Mode -------------------------------------------- 35
Checking the Connection of Your Camera
19.
20. Internet Video Conference ------------------------------------------------------ 37
Appendix
---------------------------------- 36
--------------------------------------------------------------------------------- 38
Specifications ------------------------------------------------------------------------ 38
FAQ ------------------------------------------------------------------------------------ 39
Troubleshooting --------------------------------------------------------------------- 41
Download from Www.Somanuals.com. All Manuals Search And Download.
1. System Requirements
• Personal computer, laptop, desktop, or IBM compatible with Pentium 166
MHz minimum, and with an active USB (Universal Serial Bus) port.
• Windows 98 SE / ME / 2000 / XP, CD ROM drive, color monitor, mouse and
keyboard.
• Color printer for printing color pictures.
• For transferring still images via the Internet, or for video conferencing, your
computer must have modem and communication software for Internet
connection.
2. Package Contents
Make sure that all of the items shown below are included with your VQ5020.
•
USB cable
• Pouch
•
Video cable
• Wrist strap
•
VQ5020 digital camera
•
Installation CD
•
User’s guide
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Quick Start
CAUTION
Please install the camera driver before using your camera with a PC.
Best way to transfer picture to PC is using the PC-DISK (Mass Storage)
mode to copy all your pictures.
• Getting Ready
1. Slide open the battery compartment cover.
2. Load the batteries into the camera.
3. Slide close the battery compartment cover.
4. Load the SD card (Optional) into the camera.
• Taking a Picture
1. Turn on the camera.
2. Slide the Function switch to
. (Capture Status)
3. Point the camera at the subject, use the TFT to
compose the picture.
4. Hold the camera still, gently press the shutter
button to take a picture.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
• Reviewing a Picture
1.Turn on the camera.
2.Slide the Function switch to ꢀ
(Playback status).
3.Push the joystick up or down to scroll through
the pictures or videos on the TFT.
• Deleting a Picture
1. Turn on the camera.
2. Slide the Function switch to ꢀ (Playback Status).
3. Push the joystick up or down to display the picture you want to delete.
4. Press the DELETE button to turn on the menu, and then push the joystick
up or down to select [DeleteOne] on the screen. Press the joystick button
to confirm.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Name of Parts
The following illustrations show the names of each component, button, and
switch on the camera.
1. Shutter Button
2. Power (ON/OFF) Button
3. Flash
4. Indicator Lamp
5. Lens
6. Microphone
7. Focus Switch
8. USB Port Terminal & TV Out Terminal
9. Function Switch
10. Power Lamp
11. Strap Eyelet
12. Buzzer
13. MENU Button
/MODE:Down/Mode
/ : Up/Flash
/
/
: Left/Zoom Out
: Right/Zoom In
14. DELETE Button
15. Joystick
16. TFT (panel)
17. Tripod Socket
18. SD Card Socket
19. Battery Compartment Cover
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicators
1. Indicator Lamp
2. Self-Timer Lamp
3. Power Lamp
4. Flash
Digital Interface:
USB 1.1
Video Output:
TV out in NTSC / PAL
DIGITAL ZOOM
During shooting, user can push the joystick left or right to zoom in and zoom
out.
Display Button
When in capture and video status, press the joystick and the information on
the TFT will be switched off. Press the joystick again the TFT will be turned off.
Press the joystick the third time, the TFT and the information will on at the
same time.
Menu Button
You can turn the menu ON or OFF by pressing the Menu button. As menu turn
on, the items appear, Push the joystick up or down to select the item, and then
press the joystick to enter the submenu. Push the joystick up or down to select
the item and press the joystick to confirm.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Display Information
Note: If the
icon appears on the LCD when you take pictures in dark conditions. Please
keep your hands steady, otherwise you may capture a blur picture.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Getting Started
• Installing Camera Batteries:
1. Slide open the battery compartment cover.
2. Insert batteries. Be sure to load batteries with +
and – terminals as shown on the camera.
3. Slide close the battery compartment cover.
• Inserting SD Card (Optional):
The VQ5020 offers two options for storing pictures and videos:
Internal Memory - Store pictures and videos in the 16 MB internal memory.
SD Card - Optional SD cards provide removable, reusable storage for pictures
and videos. Store as many pictures as you like, depending on the
size of the card.
CAUTION:
• The card can only be inserted one way; forcing it may damage the
camera or card. Do not insert or remove a card when power is on.
To insert an SD card:
1. Turn the camera off.
2. Position the card as shown. Push the card into the slot
until it hooks up.
3. To remove the card gently push the card until it get
released from the hooking mechanism. After it has
pooped out pull it out completely.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: 1. If the SD card is present in the camera, and then the picture/
video will save in the SD card. If no card is installed, the camera uses
internal memory.
2. If the “MEMORY FULL” warning message appears on the TFT, it
means the SD card or internal memory is full. Please remove the
memory and insert a new one or move/store all the pictures/videos in
memory to your computer.
• Turning On the Camera:
1. Press the Power button on as shown in
the illustration.
2. Buzzer will beep and indicator lamp will
light. The TFT will be turned on.
3. Press the Power button again to shut
down the camera.
• Setting the Date, Time and Date Stamp:
You should set the Date and Time when you first use your VQ5020 or the
battery is removed for an extended time (approximately 120 Seconds).
Use the following procedure to change the date and time setting.
1. Slide the Function switch to
(Capture Status).
2. Press the MENU button to turn on function menu. Push the joystick up
or down to select [Advance] item, and then press the joystick to enter
the advanced menu.
3. Press the joystick up or down to select [Date Time], and then press the
joystick to enter the submenu.
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the joystick up or down to adjust the date and time. Press the
joystick left or right to adjust to the next setting.
5. When finished, press the MENU button to exit the menu.
Use the Date Stamp setting to imprint the date on your pictures.
1. In the Date Time Setting menu. Make sure
the camera clock is set to the correct date.
2. Push the joystick left or right to select [Date
stamp] option.
3. Press the joystick to switch the Date stamp
function to on (tick on) or off (tick off).
4. Press the MENU button to exit the menu.
• Power Saving:
The camera will automatically power off approximately 3 minutes after you
do not perform any operation.
When this function is disabled, the power is not turned off automatically.
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Taking Pictures
• Taking a Picture
1. Turn on the camera.
2. The TFT will display image and symbols.
3. Slide the Function switch to
(Capture Status).
4. The TFT will display
(Snapshot Mode). If icon is
different, Press the joystick down until the icon appears on the TFT.
5. Point the camera at the subject, use the TFT to compose the image. (If turn
the switch to Macro
the switch to Portrait
, you can take picture as close as 19.5cm; If turn
, you can take picture as close as 0.95m to 1.95m.)
6. Holding the camera still, gently press the Shutter button to take the picture.
Note: How to take a good shot? After pressing down shutter button, keep your
hand steady for 2 seconds to get best result.
• Taking Continuous Pictures
1. Make sure the Function switch is set to
(Capture Status)
2. Press the joystick down until appears on the TFT. (Continuous Mode)
3. Point the camera at the subject, use the TFT to compose the image.
4. Holding the camera still, gently press the shutter button to take the pictures
Note: Flash is deactivated at this mode. You will see the icon
on the TFT.
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
• Using Digital Zoom
The Digital Zoom provides up to 4X magnification of your pictures. You may
notice a decrease in printed image quality when using Digital Zoom.
1. Make sure the Function switch is set to
Use the TFT to frame your
subject.
2.
(ꢀ) Button: The subject will be enlarged.
(ꢁ) Button: The subject will be reduced.
Push the joystick Right to zoom in. Keep the button pressed
for continuous magnification. The TFT displays the zoomed
image and the magnification level.
3. Push the joystick left to zoom out.
4. Press the Shutter button to take the picture.
Note: 1
.
The image will appear grainier as the image is digitally zoomed.
Digital Zoom is automatically turned off when the camera is turned
off.
2
.
• Using Flash Light
When you take pictures at night, indoors, or outdoors in heavy shadows, you
can use the flash. Press the joystick up repeatedly to scroll through the flash
options. The flash icon that is displayed on the TFT is the active option.
Off—flash never fires. (Default)
Auto Flash—flash fires when the lighting conditions require it.
Force Flash—flash fires every time when you take pictures,
regardless of the lighting conditions.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Red-eye—flash fires once so the subject’s eyes become
accustomed to the flash, then fires again when the picture is taken.
The Red-eye option remains in effect until you change it.
Note: 1. All flash options revert to Off when the camera is turned off.
2. Flash is off during continuous mode and video mode.
3. This setting remains until you change it.
• Setting Picture Quality
Use the Quality setting to select a picture resolution:
1. Make sure the Function switch is set to
, and then press the MENU
button.
2. Push the joystick up or down to select [Size] and then press the joystick.
3. Select an option with ꢂ or ꢃ:
L 12Mpix — for enlarged picture size; produces higher picture resolution
and larger file size.
M 5Mpix — for standard picture size; produces normal picture resolution
and middle file size.
S 3Mpix — for small picture size; pictures are of lower resolution and file
size is smaller.
4. Press the joystick to confirm.
Note: 1. This setting remains until you change it.
2. Movies can be shot with the QVGA (320 x 240) or VGA (640 x 480)
resolution.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
• Adjusting the Exposure
Set the exposure value (EV value) manually to compensate for certain lighting
conditions including: backlighting, indirect lighting, and dark backgrounds.
1. Make sure the Function switch is set to
, then press the MENU button.
2. Push the joystick up or down to select [EV] and press the joystick button.
3. Push the joystick up or down to change the exposure value:-2.0 EV ~+2.0
EV.
4. Press the joystick button to confirm.
• Taking the picture in Self-timer mode
The Self Timer creates a default delay between the time you press the Shutter
button and the time the picture is taken. This setting is ideal when you want to
include yourself in the picture.
1. Make sure the Function switch is set to
.
2. Push the joystick down until appears on the TFT. (Self-Timer Mode)
3. Place the camera on a flat surface or use a tripod.
4. Compose the picture, then press the Shutter button all the way down.
5. The red Self Timer light, located on the front of the camera, blinks for 10
seconds before the picture is taken.
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Taking Videos
• Taking a Video
1. Turn on the camera.
2. The TFT will display image and symbols.
3. Slide the Function switch to
(Video Status). And you will see the icon
appears on the TFT.
5. Frame your subject on the TFT, and then
press the Shutter button to take the video.
6. Press the Shutter button again to stop recording.
Note: 1.During recording, user can press the ꢁ / ꢀ button to zoom in/out.
2.The video resolution is QVGA (320 x240) and VGA (640 X 480).
3.You can select video resolution use the [Size].
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Reviewing Pictures and Videos
• Reviewing Pictures and Videos
1. Turn on the camera.
2. Slide the Function switch to ꢀ (Playback status).
The last picture or video is displayed.
3. Push the joystick up or down to select the picture
or video (If
appears on the TFT panel) you
want to review.
4. Press the joystick to start to playback the video.
5. During the playback, press the joystick pause/resume the video playing.
Note: You can push the joystick left or right to enlarge or reduce picture.
(Videos cannot be enlarged)
• Viewing Thumbnail
View thumbnail at once on the TFT (Index View) so that you can search the
picture quickly.
1. Make sure the Function switch is setting to ꢀ, and then press the MENU
button.
2. Push the joystick up or down to select View on the screen and press the
joystick button.
3. Push the joystick up or down to select
joystick button.
([Thumbnail]) and press the
4. Six picture thumbnails appear on the TFT.
5. Push the joystick left or right to select the previous or the next picture,
push the joystick up or down to enter the next page. Press the joystick on the
picture you want to see in the whole screen.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
• Using Slide Show
Use the Slide Show feature to sequentially display your pictures and videos on
the camera TFT, on a television screen, or on any external display device
equipped with a video input.
1. Make sure the Function switch is set to ꢀ, and then press the MENU
button.
2. Push the joystick up or down to select [View] on the screen and press the
joystick.
3. Push the joystick up or down to select
joystick.
[Slide Show] and then press the
4. Each picture and video thumbnail is displayed once, in the order in which
you took them.
5. After slide show finished, It’s auto out of Slide Show function and then show
last picture in playback mode.
Note: If you want to run the slide show on a television, connect the video cable
to the video-out port on the camera and the video-in port on the
television. Ensure that the Video Out setting is correctly set to NTSC or
PAL.
• Magnifying Pictures
Use the Magnify feature to zoom in to different areas of the picture.
1. Make sure the Function switch is set to ꢀ.
2. Push the joystick up or down to select the picture you want to enlarge, and
then press the MENU button.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Push the joystick up or down to select
the joystick.
[Zoom] on the screen and press
4. The frame (approximate location of the magnified area) appears on the
TFT. Push the joystick to select location of the magnified area and press the
joystick.
5. The picture is displayed at 2X magnification. Push the joystick to navigate to
different parts of the picture.
6. Press the joystick button to redisplay the picture at the original size.
Note: Videos cannot be enlarged.
• Selecting Pictures for Printing (DPOF Print Settings)
1. Make sure the Function switch is set to ꢀ.
2. Push the joystick up or down to select the picture you want to print, then
press the MENU button.
3. Push the joystick up or down to select
the joystick.
[Print] on the screen and press
4. For setting images one by one:
Push the joystick up or down to select
([Print One]), and then press the
joystick to set current picture for printing with DPOF.
•
For setting all images on the SD card:
Select ([Print All]) to set all pictures for printing with DPOF.
5. The checkmark appears on the TFT.
6. You can use the DPOF print settings to print with an optional direct print
function compliant printer. (Refer to your printer User’s Guide for details.)
Note: The DPOF printing feature support SD card only.
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Deleting Pictures and Videos
Delete item allow user to delete current or all the stored images from the
internal memory or SD card
.
• Deleting Single Picture or Video
1. Turn on the camera.
2. The TFT will display image and symbols.
3. Slide the Function switch to ꢀ (Playback Status).
4. Push the joystick up or down to select the picture or video you want to
delete, and then press the DELETE button to turn the menu on.
5. Push the joystick up or down to select
the joystick to delete the picture or video.
([DeleteOne]), and then press
• Deleting All Pictures and Videos
1. Make sure the Function switch is set to ꢀ, and then press the DELETE
button.
2. Push the joystick up or down to select
([DeleteAll]), and then press the
joystick button to delete all pictures or videos.
3.Then the “NO PICTURE” warning message appears on the TFT.
Note: 1. If all files (Photos and videos) are erased, the message “No Picture”
appears on the TFT.
2. Files that are erased cannot be recovered. Make sure you have
selected the images you want to erase.
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
• Formatting Internal Memory or SD Card
1. Make sure the Function switch is set to ꢀ, then press the DELETE button.
2. Push the joystick up or down to select
([Format]), and then press the
joystick to format Internal Memory or SD card.
3. Then the “NO PICTURE” warning message appears on the TFT.
Note: Formatting memory permanently erases the contents of memory.
Photos and video cannot be recovered from memory after formatting.
Transfer any files that you want to keep to a computer before
formatting memory.
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Customizing Your VQ5020 Settings
Capture Function Menu
When user slide the Function switch to
(Capture Status). Press the
MENU button can turn ON/OFF function menu. Push the joystick up or down
to select items, press the joystick to enter the submenu, and then push the
joystick up or down to change the current selected setting. Press the joystick
to confirm. Push the joystick left to return to main menu, press the Menu
button to cancel the setting and return to capture status.
[White Bal]: (White Balance)
When the white balance is set to match the light source, the VQ5020 can take
picture more accurately.
The camera sets the white balance automatically according to
shooting conditions.
Auto (*)
Daylight
Cloudy
Using when shooting at outdoors in sunlight on a clear day.
Using when shooting at outdoors and the sunlight is not
enough such as under cloudy sky, shade or dusk.
Tungsten
For recording under tungsten lighting.
Fluorescent For recording under fluorescent lighting.
(*): Default
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
[Exp Val]: (Exposure Value)
Exposure compensation lets you change the exposure setting (EV
value) manually to adjust the lighting of your subject. This feature helps
to achieve better results when recording a backlight subject, a strongly
light subject indoors, or a subject that is against a dark background.
1. Push the joystick up or down to adjust the compensation.
2. Press the joystick to confirm.
•
•
The settings can be adjusted in 1/2 steps within the range -2 and +2.
You can check the result of the compensation by viewing the image
on the TFT.
[Size]: (Picture Size)
You can change the picture size settings to suit your purpose.
for enlarged picture size; produces higher picture
resolution and larger file size.
L (Large)
M (Medium)(*)
S (Small)
VGA
12Mpix
5Mpix
for standard picture size; produces normal picture
resolution and middle file size.
for small picture size; produces lower picture
resolution and smaller file size.
3Mpix
for large video size; produces high picture resolution
and large file size.
640x480
320x240
for small video size; produces low picture resolution
and small file size.
QVGA
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
[Advance]:
Select Advance Option to bring up the following advanced menu.
Push the joystick up or down to select
[Advance] menu. Press the joystick to enter
the submenu, push the joystick up or down to
select the function you want to set, Press the
joystick to confirm, and then push the joystick
up or down change the currently selected
setting. Press the joystick to confirm the
setting. Push the joystick left to return to main menu. Press the Menu button to
cancel the advance menu and return to capture status. (*): Default
Beeper:
ON
Setting the beep sound to on. (*)
OFF Setting the beep sound to off.
Auto Power Off:
ON
Setting the camera automatically powers off approximately 3
minutes after the last function is accessed.
OFF Stopping the camera automatically powers off function.
Quick Review:
ON
Setting the quick review feature to on.
OFF Setting the quick review feature to off. (*)
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer:
10 Sec
15 Sec
20 Sec
Setting the timer in self-timer mode to 10 second. (*)
Setting the timer in self-timer mode to 15 second.
Setting the timer in self-timer mode to 20 second.
Quality:
Normal
Fine
Setting the picture quality to normal. (Small file size)
Setting the picture quality to standard. (*)
Best
Setting the picture quality to fine. (Bigger file size)
TV:
PAL
Setting the TV mode to PAL. (*)
Setting the TV mode to NTSC.
NTSC
Language:
English
Italiano
Polski
Setting the language to English. (*)
Setting the language to Italian.
Setting the language to Polski.
Setting the language to German.
Setting the language to French.
Setting the language to Spanish.
Setting the language to Dutch.
Setting the language to Japanese.
Setting the language to Chinese.
Setting the language to Portuguese.
Deutsch
Français
Español
Nederlands
NJϟ
ƅdž
Português
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Flicker:
50Hz
Setting the flicker frequency to 50 Hz. (*)
Setting the flicker frequency to 60 Hz.
60Hz
Date Time:
YES
Setting the Date / Time.
Reset:
YES
Setting all the functions to default.
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Function Menu
When you slide the Function switch to ꢀ (Playback Status). (*): Default
[Delete]:
Delete item allow user to delete current or all the stored images from the
Memory.
Press the Delete/Shutter Button can turn ON/OFF the Delete menu. Push the
joystick up or down to select items and then press the joystick to confirm.
Press the menu to return to playback status.
Select “Delete One” to delete (erase) current picture or
video.
Delete One
Delete All
Format
Select “Delete All” to delete (erase) all pictures or videos.
Select “Format” to format the flash memory or SD card.
[View]:
Default setting of the playback mode displays one picture in the TFT screen.
Pressing Menu button can turn ON/OFF the Edit menu. Push the joystick up or
down to select items and then press the joystick to enter the submenu, and
then push the joystick up or down to select the item and then press the joystick
to confirm. Push the joystick left to return to the main menu. Press the Menu
button to cancel the advance menu and return to playback status.
Single
Select “Single” to Display one picture.
Thumbnail
Select “Thumbnails” to display six pictures.
Slide Show Select “Slide Show” to slide show.
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User can select to show the thumbnail, and a blue-frame indicates the current
picture that is selected, just press the joystick to fill (enlarge) the picture in
screen. Push the joystick left or right to jump previous/next picture, push the
joystick up or down to switch the page.
Once the user selects the Slide Show Mode, camera will automatically play all
the pictures.
[Print] (DPOF):
Select this item to bring up the printing option.
Print One Select “Print One” to print current picture.
Print All
Select “Print All” to print all pictures.
Cancel
One
Select “Cancel One” to cancel print setting of current
picture.
Cancel All Select “Cancel All” to cancel print setting of all pictures.
[Zoom]:
In Zoom item, push the joystick up, down, left or right to select the area of
interest, and then press the joystick to enlarge zoom area to whole screen.
Press the joystick to cancel the Zoom.
Zoom
Select “Zoom” to magnify different parts of the pictures.
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Installing Your Camera Driver and Software
• Installing Driver
1. Turn on the computer.
2. Insert installation CD into the CD-ROM drive and
the installation CD menu will appear.
3. When you see the following screen, choose
“Camera Driver”.
4. Follow the on-screen instructions.
5. Restart the computer.
For Windows 2000/XP only:
During installation of the driver or software, computer may display the
message: “The software you are going to install doesn’t contain the
Microsoft signature, and may not work correctly.
Do you want to continue? Y / N”
Please select Y to continue the installation.
• Installing Software
1. Insert installation CD into the CD-ROM drive
and the installation CD menu should appear.
2. When you see the following screen, choose
“Arcsoft Software” to install the software.
3. Follow the instructions on screen.
4. Installed software will automatically create
“VideoImpression 2” or “PhotoImpression 5” logo on your desktop.
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Uninstalling Software
Following instruction will guide you to uninstall (remove) software from
computer.
• Uninstalling Software
1. Click "Start" from the task bar and choose "Settings" -> "Control Panel". (For
Windows XP: "Start" -> "Control Panels")
2. Double click "Add/Remove Programs".
3. Select the program to be uninstalled: "ArcSoft Software Suite".
4. Click on "Remove Program" (For Windows 2000/XP: Change /Remove")
and then "OK".
• Uninstall Camera's Driver
1. Click "Start" from the task bar and choose "Settings" -> "Control Panel". (For
Windows XP: "Start" -> "Control Panels").
2. Double click "Add/Remove Programs".
3. Select the program to be uninstalled "Digital MultiCam II Digital Camera”
and “Digital MultiCam II Video Camera".
4. Click on "Remove Program" (For Windows 2000/XP: "Change /Remove")
and then "OK".
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Mass storage & Direct Print
1.Mass storage: You can download the pictures in the camera to your
computer.
2.Direcr Print: You can print directly to USB port printer.
You need:
%
Camera with batteries
USB port printer
USB cable included with your camera
%
%
• Slide the Function switch to ꢀ (Playback Status).
• Connect USB Cable with printer and digital camera. Turn on your camera.
• The pop up menu will appears and allowing selection of Mass Storage or
Direct Print function. Push the joystick to select the function you want to set:
Press the joystick to enter Mass storage mode. The “Mass
Storage” message appears on the LCD monitor. (see next page)
Press the joystick to enter Direct Print menu. The last picture is
displayed on the LCD monitor.
• Push the joystick up or down to select the picture you want to print, then push
the joystick left or right to choose a printing option.
%
Fixed : "4 x 6" or "5 x 7".
Print : Printing picture
Press the joystick to switch or confirm the item.
• Turn off the camera and printer.
%
• Disconnect the USB cable from the camera and the printer.
Note: You must install your camera driver.
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Downloading Images to Your Computer
For Windows 98/me customers:
Please install camera drive before connecting.
1. Turn the camera and computer on, then connect the camera to the computer
with the included USB cable, and then slide the Function switch to ꢀ
(Playback Status)
2. “USB Mass Storage drive” appears on the computer screen.
For Windows XP:
A dialogue box with options appears as
shown on the Right side.
The options are Play, Find/Fix/Share Images.
Open folders to view files, take no action,
Copy images to a folder on my computer,
View a slide show of images, and etc.
Please select one of them and click on “OK”.
For Windows 2000/me/98:
Double click on “My computer”, and then double click on Removable Disk (i:) in
the DCIM files. (All the photos and videos are stored here).
3. Press “Ctrl+A” on the keyboard to choose all the photos/videos, then press
“Ctrl+C” to copy photos, and then open a file in the computer, press “Ctrl+V”
to paste the photos.
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
16. ArcSoft PhotoImpression 5
ArcSoft PhotoImpression 5 is a complete
digital image editing application designed with
real people in mind. Easy-to-use “Getting
Start” guides, user-friendly UI, complete image
editing functionality, give users wonderful
experience to organizing, viewing, enhancing,
editing, printing and sharing photos.
Click “Start”‰ “Program”‰ “ArcSoft Software Suite“‰ “PhotoImpression 5” to
launch PhotoImpression 5 or double click PhotoImpression 5 icon on the
desktop and you will see a window as the screenshot above.
Select the picture source. For example: Click “Folder”
for acquiring
photos from your computer. Select the file path. You can start editing them.
- 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Get Photo – Choose how to view or acquire photos.
2. Enhance – Crop, brighten, rotate, resize and modify photos.
3. Create – Add clip art, special effects, frames and more.
4. Project – Make calendars, photo books and greeting cards.
5. Print – Print multiple images per page and multiple pages at one time.
6. Send – Email photos or upload them to online photo sharing accounts.
Note: For more detailed information, please refer to the Help of the program.
17. ArcSoft Video Impression 2
ArcSoft VideoImpression 2 creates home
movies and slide shows by combining
existing videos, still images, exciting scene
transitions, and multiple audio tracks.
Though simple to use, the program
provides intense and broad video editing
and export options perfect for owners of
digital still cameras, desktop and digital
video cameras, and camcorders.
Click “Start”‰ “Program”‰ “ArcSoft Software Suite“‰ “VideoImpression 2”
to launch VideoImpression 2 or double click VideoImpression 2 icon on the
desktop and you will see a window as the screenshot above.
Open a Project – Let you browse the project files in the VideoImpression
system folder. By “project,” we mean to say a file that contains all of the
settings and each individual component on the Storyboard. When you
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
save your work as a project, you can go back and swap components, add
and remove them, alter audio, etc.
Create a Video – Create a new video project. You can retrieve media
materials from the device connected or choose media files from system
folder. You can choose video materials from your photo album as well.
Create a Slide Show – Create a slide show project. You can retrieve media
materials from the device connected or choose media files from system
folder. You can choose slide show materials from your photo album as well.
If the box “Always show this wizard when VideoImpression starts.” at the
bottom of the wizard is checked, the wizard will appear each time you run
the program. If you'd like to skip the wizard the next time, uncheck the box.
Select the item you desire and the picture and videos you need then you will
enter the editing interface as below.
You can use the six steps in the Function Menu to create video clips and
slide shows.
- 33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Media - Select the videos and images that will comprise your final movie or
slide show.
2. Edit - Modify video and image color and adjust the duration of each movie
component. Only available for video projects.
3. Effects - Add neat special effect transitions between each component, or
apply a pre-made theme.
4. Text - Place animated text on any movie component. Only available for
video projects.
5. Narrate - Record audio directly from the program and add it to your movie.
6. Produce - Combine all components to create your final video; save it in a
variety of ways or email it to friends.
The Storyboard - The backbone of the creation process, it's where you
assemble your movie.
The Player - Preview and modify your movies in this area.
Working with Albums - Albums let you organize your media for easy access.
Note: For more detailed information, please refer to the Help of the program.
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
18.Using the Camera in PC-Cam mode
The VQ5020 offers two USB modes: Removable Disk and PC Camera.
Note: Please install camera drive before you can use the camera in PC-Cam
mode.
Setting Up PC-Cam
1. Turn the camera power on and slide the Function switch to
(Capture
status).
2. Connect the camera and the computer use the USB cable.
3. There are many methods to view your image in PC-Cam mode if you have
Video software. For example:
A. Click NetMeeting‰Start Video.
B. About Arcsoft software:
a. PhotoImpression 5: Click “file” on the
function menu‰ Click “Get photo” ‰
an icon
on the browse pane
as shown on the right ‰“Live”.
b. VideoImpression 2: Click Create a new video‰Get from
Album‰Capture Video.
- 35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
19.Checking the Connection of Your Camera
For Windows 98/Me only
Double click “My Computer” icon ->
Control Panel -> System -> Device ->
Manager -> Imaging Device; when you
See “Digital MultiCam II Digital Camera” and
“Digital MultiCam II Video Camera” that means
now the camera is installed.
For Windows 2000/Xp only
Double click “My Computer” icon
(Windows 2000) or go to Start button
and select “My Computer” (Windows
XP) -> Control Panel -> System ->
Hardware -> Device Manager ->
Imaging Device; when you see
“Digital MultiCam II Digital Camera” and
“Digital MultiCam II Video Camera” that means
now the camera is installed.
- 36 -
Download from Www.Somanuals.com. All Manuals Search And Download.
20. Internet Video Conferencing
To run a video conference with another person, you and the other person
must have the computer station configured with web camera, microphone,
speakers, modem and have access to the Internet.
You have to download video conference software, purchased or free, such
as basic software like I-phone, Microsoft NetMeeting, or Yahoo Messenger.
search for NetMeeting and follow the download procedure.
Starting NetMeeting, you have to follow the simple set up procedure on the
computer screen, enter your personal information and adjust the microphone
volume. Here's how video conferencing works:
To receive video:
1.Call someone you want to see/hear.
2.On the Tools menu, point to Video, and then click Receive.
If you have a video camera, you can send video to the person you are
calling.
To send video
1.Call someone you want to see/hear.
2.Click the Start Video button.
Note:
1. You can also send video by clicking the Tools menu, pointing to Video,
and then clicking Send. After starting the video, the button changes to
Stop Video. To stop the video, click the Stop Video button again.
2. For software support, or detailed information how to work with
- 37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix:
Specifications
Image Sensor Output
Lens Specification
Focus Range
CMOS 2592 x 1944 Pixels (5.0M Pixels)
Fixed focus lens, F 3.0, Focal length = 8.6 mm
Macro
: 20 cm, Portrait
: 1m ~ 2m, Landscape
: 2m ~ Infinity
Lens composition
Optical Zoom
Preview digital zoom
Playback digital zoom
Viewfinder
5G(Include IR)(TBD)
None
4X
4X
None
Flash Strobe
Flash light distance
White Balance
Exposure metering
Exposure compensation
Image Play
IGBT (Force On, Force Off, Red Eye Reduction and Auto)
0.5 ~ 1.5m
Automatic / Daylight / Cloudy / Fluorescent Lamp / Tungsten Lamp
Center weighted
Automatic / Manual (-2EV to +2EV in 1/2 EV steps)
Single Image, Thumbnails, Slide Show, Movie Clip
1/2 ~ 1/1500 Sec
Shutter Speed
ISO Speed
ISO Auto
Still image format
Still image size
Movie Format
JPEG (DCF, Exif2.1)
12M --- 4000 x 3000 Pixel; 5M --- 2592 x 1944 Pixel; 3M --- 2048 x 1536 Pixel
AVI(Motion JPEG) with digital zoom recording
QVGA 320 x 240 Pixels Up to 50 sec (30 fps);
VGA 640 x 480 Pixels Up to 20sec (20 fps)
Movie Size(with Audio)
Audio
Microphone
Yes (Buzzer)
Yes
RTC (Real-Time Clock)
Display
Yes
2.5” LTPS LCD
RTC (Real-Time Clock)
PC Interface
TV interface
Yes
USB 1.1
NTSC/PAL
Storage
Built-in 16MB Flash Memory + SD Card Slot (Card Not Included)
AAA 1.5V Alkaline/Re-chargeable Batteries x 2 (not included)
Microsoft Windows 98 SE / 2000 / ME / XP
89mmx56mmx24.5mm
Battery
O / S
Dimension (WxHxD)
Bundled Software
ArcSoft PhotoImpression 5 and ArcSoft VideoImpression 2
- 38 -
Download from Www.Somanuals.com. All Manuals Search And Download.
FAQ
Q1: If I do not use batteries, can I use an USB cord and Adaptor and still
take pictures with my VQ5020?
A1: No, when taking pictures, it is important that you use batteries. Also, you
have to remember to charge the batteries before operating your camera.
Q2: I am not very familiar with VQ5020 and usually my pictures
turn out blurred. Is there any way I can better focus my camera?
A2: Yes, please locate the Macro Switch on the camera lens. Switch it to the
Landscape (
switch to the Macro (
setting unless taking close-up pictures in which case, you must
)
setting.
)
Note: If the pointer is found anywhere in between these two symbols, it will
adversely affect the focus. Also, ensuring there is enough lighting and that
your hands are steady for one second after you press the Shutter Button will
help with the focus.
Q3: I have noticed that the pictures I have taken are all very dark. How can I
make these pictures lighter? Should I use the flash often?
A3: Avoid taking pictures in places with little lighting. When it is cloudy, please use
other means to create more light before taking pictures. We recommend using
the flash function during nighttime. During the day, the flash may be too strong
and the picture may come out too bright, thus use it only during the night.
- 39 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Q4: After I am done taking a picture, it takes a while for the picture to come up
on the TFT . Is there something wrong with my camera?
A4: No, with the camera, if you select a larger picture size, it will take longer for it to
come up on the TFT. So if you want to speed things up, please select a smaller
picture size. (M picture size is recommend)
- 40 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Source
Solution
The camera is not The power is not on
running
• Press the Power button to turn the
camera on.
The batteries were not
inserted properly
• The correct direction to insert the
AAA batteries is indicated on the
camera.
Batteries are depleted
• Replace with unused alkaline or fully
recharged batteries (two AAA-size
batteries).
The battery cover is not • Close the cover correctly and
closed properly
securely.
The camera is not The camera is in the
• Slide the function switch to Capture
taking pictures.
Playback Function mode Function mode.
The flash is charging
• Wait until the flash charges. You can
press the shutter button when the
indicator glows a steady orange.
The SD card or internal • Obtain a new SD card and insert it.
memory is already full
• Download images to your computer,
and then erase them from the card
or format to free up more space.
The SD card is not
formatted correctly
• Ask SD card manufacturer for
assistance.
- 41 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Source
Solution
Picture is not
clear
The lens is dirty
• Clean the lens.
The pictures are
blurred
Hands were not steady • Ensure hands are steady when
when taking the picture
taking picture and remain steady
one second after clicking the Shutter
button.
The picture subject was • Keep a minimum distance of 1.2
not in the focus range of
the camera
meter between the picture subject
and the camera lens to stay in the
focus range of the camera.
The flash doesn't The flash mode is set to • Set the flash to any other mode
fire
Off
except Off.
The computer
cannot
communicate with
the camera
Camera power is off
• Turn on the camera.
USB cable is not
securely connected
• Connect cable to camera and
computer port.
Driver is not installed (for • Install the camera driver.
Windows 98 user)
The PC Camera
doesn't work
Camera power is off
• Turn on the camera.
USB cable is not
securely connected
• Connect cable to camera and
computer port.
Driver is not installed
• Install the camera driver.
C
- 42 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|