OPERATION INSTRUCTIONS
10.4 PORTABLE TV with built-in multimedia Card Player
Download from Www.Somanuals.com. All Manuals Search And Download.
Check List
When you openthe box, makesure the followingcomponents are notmissing.
1）Portable TV (1)
2）TVStand (1)
3）Remote Control (1)
4) AV Cable (1)
5) CATV Cable (1)
6）Headphone (1)
7）Power Supply (1)
8) Warranty Card (1)
9) User Manual(1)
If you haveany questions, pleasecontact the retailer.
Introduction
10.4 Portable TVsupports:
JPEG picture file.
WMA, MP3 soundfiles.
MPEG1, MPEG2 videofiles.
Background sound playing
13 different pictureplaying Modes.
CF, SM, MS, MSPRO, SD, MMC, IBM MICRODRIVE seventypes of memorycards.
AV Input/Output
TV
Remote control support.
Safety Precautions
Please be awareof the followingprecautions.
1.Handle itcarefully. Placemachine on asoft cloth orsurface before installationin order to
prevent for scratches.
2.Spray a littleof cleaner onsoft cloth andwipe the panel.
3.Do not blockthe vent toprevent overheating.
4.Never disassemble orperform self-maintenance andrepair, since opening or removing
cover plate maycause high-voltage electricshock or otherdangers. Have aqualified
technician perform allproduct maintenance.
Installation Instructions
3.1 SINGLE FRAME
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Front View（Fig. 1）：
Remote Sensor
Fig. 1
2. Top View（Fig. 2）：
Fig. 2
Two slotsfor CF, SM, MS, MS PRO, SD, MMC, IBM MICRODRIVE:7 types ofmemory
cards supports.
3. Back View（Fig. 3）：
Wall Hanging: can installonto the surfaceof a wall. Table Stand: use thestand to support
the Portable TVfor weight support.
Hanging Hole
Stand
Fig. 3
Input/output Introduction（Fig. 4）：
DC 12V
Signal Switch
AVConnector
TV
Fig. 4
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
lTV cable :Connect CATV cable orTV Antenna Cable toTV terminal.
: Headphone Input(Sound export),can connect toheadphone.
l
lAV input: Connectswith AV cable andmatch the cablewith the correctcolor input.
lSignal switch: switchAUDIO andVIDEO signal input/output.
lDC12V: Powerinput，install the powercord into theDC12V input.
4. Button Instructions（Right-hand side）（Fig. 5）：
Power
MODE
Add and Subtract
MENU
Fig. 5
Instruction：
lPower: on/off switch.
lMODE: Mode change, can switch TV、MEDIA PLAYER、AV.
lAdd、Subtract: Multifunction support
1.Before selectingany option, press Add andSubtrac buttons forvolume control
2.Under TV, the buttonsare for TVchannel switch.
3.Under OSD menu, the buttonsare for selectingmenu options andadjustments.
lMENU: Highlight OSD menu.
3.2 DOUBLE FRAME
1. Front View（Fig. 6）：
Frame
LCD
Remote Control Sensor
Fig. 6
2. Side View（Fig.7）：
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU
Add/Subract
MODE
Power
Fig. 7
Two slotsfor CF, SM, MS, MS PRO, SD, MMC, IBM MICRODRIVE:7 types ofmemory
cards supports.
Buttons instruction pleasego back toSingle FrameAlbum instruction.
3.DigitalAlbum display setup: (Review Single FrameAlbum forinstallation
instruction)
lWall setup：（hang horizontally）Able to hang on the wall
lTable setup：same as the Single FrameAlbum.
4. Back View（Fig.8）：
Hanging Hole
DC 12V
Signal Switch
AVConnector
TV
Fig. 8
:Headphone Input (Sound export), can connect to headphone.
lAV input: Connectswith AV cable andmatch the cable with the correct color input.
lSignal Switch: switch AUDIO andVIDEO signal input/output.
lDC12V: Powerinput，install the power cord into the DC12V input.
lTV cable: ConnectCATVcable or TVAntenna Cableto TV terminal.
Remote Control Guide
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
4
5
6
7
8
9
POWER
MUSIC
PHOTO
MOVIE
SETUP
MENU
ZOOM
ROTATE
PLAY
10 UP
11 STOP
12 MODE
13 LEFT
14 ENTER
15 RIGHT
16 MUTE
17 0
18 DOWN
19 VOLUME
20 VOLUME
21 NUMBER KEY
22 REPEAT
23 DISPLAY
24 GOTO
1 POWER
2 MUSIC
Pressit to turnthe machine onor off
Inselection menu, pressthe“MUSIC”key will selectthe music
files. If donot select anyfiles, then systemwill automatically play
the first musicfile. (Media PlayerMode)
3 PHOTO
4 MOVIE
5 SETUP
Inselection menu，press the“PHOTO”key will selectthe
picture files. Ifdo not selectany files, thenthe system will
automatically play thefirst picture file. (Media Player Mode)
Inselection menu, pressthe“MOVIE”key will selectthe movie
files. If donot select anyfiles, then thesystem will automatically
play the firstmovie file. (MediaPlayer Mode)
Pressfor setup menu. Press setup againto exit thesetup menu.
(Media Player Mode)
Pressit to setupthe System.
Underthe play selection, if the picturesize does notmatch with the
frame, then usethe “ZOOM”button to enlargethe picture. Press
once for double the size, twicefor triple thesize, three timesfor
four times the size, and fourtimes for theoriginal size. After
6 MENU
7 ZOOM
enlarging the picture,use the“
”for surface adjustments.
8 ROTATE
9 PLAY
Under the play selection, use the“ROTATE”key for picture
rotation. Rotate keyonly works underPHOTO menu.
1.Play and pause function. (MediaPlayer Mode)
2.When playinga picture anda music atthe same time. Press once
to stop playingthe picture, presstwice to stopboth picture and
music playing, andpress three timesto restore playing.
Under play mode, press on the“STOP”button to stopplaying.
(Media Player Mode)
11 STOP
12 MODE
10/18 UP/DOWN
SwitchPicture display modes. There are 13different display modes.
In OSD menu, up anddown switch.(
)
13/15 LEFT/RIGHT InOSD menu, leftand right switch. (
increase and decreaseadjustment.
), In setting, press for
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
14 ENTER
16 MUTE
Selectan option froma menu.
Mute(Sound off).
19/20 VOLUME
17/21 NUMBER
Volume control.
Numbers:from 0 to9.
Under media playselection, can pressthe number toselect
files, such asMP3, JPEG, WMA,MPEG files.
Under TV mode, use thenumbers for channelselection.
Press Enter forinstant channel change. (Or wait 2seconds
for auto channelchange)
22REPEAT
Under mediaplay selection, pressREPEATto have MP3,
MPEG or picturefiles repeat itsplay function.
Under mediaplay selection, usethe DISPLAY key to have
picture and musicto play atthe same time(Background
music).
23DISPLAY
24GOTO
InPhoto, music, video, or file, usercan switch betweenthese
4 modes. As shown under the picture below.
Fig. 9
Setup Menu
5
Playing multimedia Files
1.Go back toproduct description forinstruction on howto insert memorycard onto the
slots.
Reminder：Support CF, SM, MS, MS PRO, SD, MMC, IBM MICRODRIVE: 7 different
types of memorycards.
/2
SM
CF
SD、MMC、MS
IBM MICRODRIVE
MS PRO
2.display photo：press PHOTO key，and enter thephoto menu. Usenumber keys (1-9)
for photo selectionand press ENTER to select thephoto.
3.display music：press MUSIC key, andenter music menu. Controlling instruction isthe
same as above.
4.display movie：press MOVIE key，and enter moviemenu. Controlling instructionis
the same asabove.
5.When playing theabove media, press PLAY to pause andpress again tocontinue. Press
STOP to stop playing.
6.Background music（Can play musicand photo atthe same time):
1)Under PHOTOmenu display mode, press DISPLAY can play photoand music atthe
same time. Thefirst music andthe first picturewill be playedat the sametime.
2)Under MUSIC menu display mode, press DISPLAY and same instructionas above.
3)When musicand photo isplaying at thesame time. Press PLAY once to stopplaying
photo, twice forboth music andphoto, and threeto continue playingboth.
7.For other userinstruction please goto Remote Controlinstruction.
5.1 SETUP MENU-MAIN PAGE
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU-MAIN PAGE
PHOTO SETUP(Change Photo settings）
MUSIC SETUP (Change Music settings）
SLIDESHOW SETUP(Change Slideshow
settings）
MOVIE SETUP (Change Movie settings）
PREFERENCES (Change Menusettings）
EXIT SETUP(Exit MAIN PAGE)
GENERAL SETUP
Press SETUP key on remotecontrol to open
SETUP MENU.
MAIN PAGE
5.2 SETUP MENU-PHOTO
PHOTO Thumbnail Digest Function Setup
ON: Turn the function on OFF: Turn this function off
THUMBNAIL DIGEST
TRANSITION MODE
ORIENTATION
1.Enter MAIN PAGE.
2.Press ENTER key to enter submenu PHOTO
3.Press (
,
) to highlight item to change, press
MAIN PAGE
to highlight your choice, press ENTER to save.
4.Press ( ) to go back to upper menu. then
highlight MAIN PAGE to go back to previous menu.
SETUP MENU--PHOTO
PHOTO-THUMBNAIL DIGEST
PHOTO transition modefunction setup
FAST
1.Enter PHOTOSETUP menu.
NORMAL
SLOW
THUMBNAIL DIGEST
FAST
TRANSITION MODE
ORIENTATION
2.Press ( 、) to highlightORIENTATION，press
（ ）to show submenuon the right. Press（ 、）to
select desired item. Press （ENTER）to save.
3.Press（ ）to return to previous menu. Select
MAIN PAGE then press（ENTER）to return to
previous menu.
NORMAL
SLOW
MAIN PAGE
TRANSITION MODE
PHOTO-TRANSITION MODE
PHOTO Orientation FunctionSetup
DEFAULTS
IGNORE
THUMBNAIL DIGEST
TRANSITION MODE
1. Enter PHOTOSETUP menu.
2. Press（ 、）to highlight ORIENTATION，press
（ ）to show submenuon the right. Press（ 、 ）
to select desireditem. Press （ENTER）to save.
3. Press（ ）to return to previous menu. Select
MAIN PAGE then press（ENTER）to return to
previous menu.
DEFAULTS
IGNORE
ORIENTATION
MAIN PAGE
ORIENTATION
PHOTO-ORIENTATION
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 SETUP MENU-MUSIC
SETUP MENU--MUSIC
MUSIC Repeat FunctionSetup
ONE: Repeat one music file.（MP3）
ALL: Repeat all music files.
REPEAT MODE
MAIN PAGE
ONE
ALL
OFF
SETUP MENU--MUSIC
OFF: TurnRepeat function off.
Instruction same as above
MUSIC-REPEATMODE
5.4 SETUP MENU-SLIDE SHOW
SETUP MENU--SLIDE SHOW
SLIDE SHOW PlayingFunction Setup
MANUAL: Slide show plays manually.
SLIDESHOW MODE
FOLDER REPEAT
INTERVAL TIME
TRANSITION
MANUAL
AUTO
AUTO START
AUTO: Slide showplays automatically.
Instruction same as above
MAIN PAGE
SLIDESHOW MODE
SLIDE SHOW-SLIDESHOW MODE
SETUP MENU--SLIDE SHOW
SLIDESHOW MODE
SLIDE SHOW FolderRepeat Function Setup
ON: TurnFolder Repeat functionon.
OFF: TurnFolder Repeat functionoff.
ON
FOLDER REPEAT
INTERVAL TIME
TRANSITION
OFF
AUTO START
MAIN PAGE
FOLDER REPEAT
SLIDE SHOW-FOLDERREPEAT
SETUP MENU--SLIDE SHOW
SLIDE SHOW IntervalTime Setup
ONE SECOND
SLIDESHOW MODE
FOLDER REPEAT
ONE SECOND
INTERVAL TIME
TRANSITION
AUTO START
THREE SECONDS
FIVE SECONDS
TEN SECONDS
THREE SECONDS
FIVE SECONDS
MAIN PAGE
INTERVAL TIME
TEN SECONDS
SLIDE SHOW-INTERVAL TIME
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU--SLIDE SHOW
SLIDE SHOW Transition function Setup
FULL SCREEN
SLIDESHOW MODE
FOLDER REPEAT
INTERVAL TIME
TRANSITION
FULL SCREEN
TOP->BOTTOM
BOTTOM->TOP
T/B->CENTER
CENTER->T/B
BLIND: T/B
TOP->BOTTOM From top tobottom
BOTTOM->TOP From bottom totop
T/B->CENTER From top/bottom tocenter
CENTER->T/B From Center toTop/bottom.
AUTO START
LEFT->RIGHT
RIGHT->LERT
L/R->CENTER
MAIN PAGE
BLIND:T/B
Blinder
TRANSITION
LEFT->RIGHT From left toright
RIGHT->LEFT From right toleft
L/R->CENTER From left/right tocenter
SLIDE SHOW-TRANSITION
SETUP MENU--SLIDE SHOW
SLIDE SHOWAuto Start FunctionSetup
ON: TurnAUTO START on.
SLIDESHOW MODE
FOLDER REPEAT
INTERVAL TIME
TRANSITION
ON
AUTO START
OFF
MAIN PAGE
OFF: TurnAUTO START off.
AUTO START
SLIDE SHOW-AUTO START
5.5 SETUP MENU-MOVIE
SETUP MENU--MOVIE
MOVIE INTERVAL Time Function Setup
INTERVAL TIME
REPEAT MODE
FAST
NORMAL
FAST
MAIN PAGE
INTERVAL TIME
NORMAL
MOVIE-INTERVAL TIME
SETUP MENU--MOVIE
INTERVAL TIME
MOVIE Repeat ModeSetup
OFF: TurnRepeat function off.
ONE: Repeat onemovie file.
ALL: Repeat allmovie file.
REPEAT MODE
OFF
ONE
ALL
MAIN PAGE
REPEAT MODE
MOVIE-REPEATMODE
5.6 SETUP MENU-PREFERENCES PAGE
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PREFERENCES PAGE
PREFERENCES PAGETV Type function
Setup
TV TYPE
VIDEO OUTPUT
OSD LANG
MULTI SYSTEM
NTSC
PAL
MULTI.SYSTEM: Change TV system
(Media Player) automatically.
OSD MESSAGE
DEFAULTS
NTSC: For U.S., Japan and Korea
MAIN PAGE
SET TV TYPE
PAL: For countries adopting PALsystem.
PREFERENCES PAGE-TV TYPE
PREFERENCES PAGE
TV TYPE
PREFERENCES PAGE VIDEO OUTPUT
Setup
S-VIDEO
YPBPR
RGB
VIDEO OUTPUT
OSD LANG
S-VIDEO:S-Video signaloutput.
OSD MESSAGE
DEFAULTS
YPBPR: YPBPR signal output.
MAIN PAGE
SET VIDEO OUTPUT
RGB: RGB signaloutput.
Attention: Don tchange this item.
PREFERENCES PAGE-VIDEO OUTPUT
PREFERENCES PAGE
PREFERENCES PAGE OSD Language Setup
ENGLISH: OSD in English.
TV TYPE
VIDEO OUTPUT
ENGLISH
CHINESE
OSD LANG
OSD MESSAGE
DEFAULTS
MAIN PAGE
SET OSD LANGUAGE
CHINESE: OSD in Chinese.
PREFERENCES PAGE-OSD LANG
PREFERENCES PAGE
PREFERENCES PAGE OSD MESSAGE
Setup
TV TYPE
VIDEO OUTPUT
OSD LANG
ON
OSD MESSAGE
DEFAULTS
ON: Turn OSD MESSAGE on.
OFF: Turn OSD MESSAGE off.
OFF
MAIN PAGE
OSD MESSAGE
PREFERENCES PAGE-OSD MESSAGE
PREFERENCES PAGE
TV TYPE
VIDEO OUTPUT
OSD LANG
PREFERENCES PAGE DEFAULTS Setup
OSD MESSAGE
RESET
DEFAULTS
RESET: Restoremanufacturer's defaults
settings.
MAIN PAGE
OSD DEFAULTS
PREFERENCES PAGE-DEFAULTS
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
PREFERENCES PAGE DEFAULTS is active only in initial status by press SETUP key.
If not, please press GOTO keyto return to initial status.
5.7 SETUP MENU-EXIT SETUP
MAIN PAGE EXIT SETUP
Press（ 、 ）to highlight EXITSETUP
Press ENTER to exit OSDmenu.
GENERAL SETUP
MAIN PAGE
6
OSD Setup Guide
6.1 AV Mode
Remote Control Operation
Press MENU to highlight theOSD setting, press
select aimed variable, then press toadjust numerical variable;If the variableis not
numerical ( suchas TV , VIDEO ), press to selectaimed variable, thenpress
,to select submenu, press
,to
ENTER to confirm. PressRETURN button at thesubmenu to returntill exit OSD, or you
can wait forOSD exit automatically (please reference thedetail OSD menuclosing time
setting).
Tips: Youcan also press ENTER、MENU buttons on remotecontrol or OSD on the
machine to returntill exit theOSD setting.
VIDEO and MEDIA PLAYER Mode
The Specific Menus:
The specific ofMenus are differentfor each modeof VIDEO、TV、MEDIA PLAYER,
However, the same for VIDEOand MEDIA PLAYER Menus.
Select Menu:
VIDEO ADJUST
OSD ADJUST
INPUT SELECT
AUDIO
LANGUAGE SELECT
EXIT
6.1.1 VIDEO ADJUST
COLOUR TEMPERATURE
RESET
RETURN
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation under highlighting the variable
HUE
reduce/increase the variable
BRIGHTNESS reduce/increase the variable
CONTRAST reduce/increase the variable
COLOR
TEMPERATURERreduce/increase the variable
RESET
defaults recall
return to Menu
SHARPNESS reduce/increase the variable
SATURATION reduce/increase the variable
RETURN
Note: To ease theoperation, the secondfunction of multifunctionbuttons will beused
(up, down, left, right at menusetting)，representing by ： 、 、 、
6.1.2 OSD ADJUST
TIMER SET
RETURN
H-POSITION
V-POSITION
TIMER SET
Move horizontally OSD-OFF TIME
OSD auto off time setup
OSD-TRANSPARENT OSD Transparency
RETURN Return to Menu
Move vertically
Timer function
TIMER SET isto set upthe clock's On/Offtime. It appearsin the upperright corner ofthe
screen. Timeris in functiononly "Timer On" is selected. Press or toturn TIMER on
or off. Press or to switchbetween ON, OFF, TIME, TIMER ON and TIMEROFF.
When timer ison, three selectionswill be displayedon the screen, including ON (On
Time) 、OFF (Off Time) and TIME(Current Time).Press numbered keysto adjust tothe
correct time. Ifthe current timeis 13:15:41, press1, 3, 1, 5, 4, 1as the arrowflashes.
Confirm it aftertime adjust.
ON: System isoff, internal clockstill runs, whenit's time tostart, system willbe
automatically turned on
Off: System ison, when it's time toshut down, systemwill be automaticallyturned off.
TIME: Current time
When Timeris set to NO , auto-timeris off.
1.Press ENTER /MENU to entersubmenu, then pressENTER / MENUto enter OSD
ADJUST (orpress
2.Press 、 to highlight your choice.
)
3.Then press ENTER to highlight, press 、 to change settings. Or Press ENTER for
options
6.1.3 INPUT SELECT
VIDEO
TV
MEDIA PLAYER
RETURN
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
For VIDEO input signal
For TV signal
For Media Player
Return to menu
VIDEO
TV
MEDIA PLAYER
RETURN
1. Press MENU to enter submenu, then press ENTER to enter INPUT SELECT .
2. Highlight your selection, press ENTER to confirm.
6.1.4 AUDIO (AUDIO SETTING)
RETURN
VOLUME
BASS
1.Press MENU to enter submenu, then press ENTER to open AUDIO menu .
TREBLE
BALANCE
(Or press
2.Press
3.Press ENTER to open andpress 、 to change thesettings. Or pressENTER for
)
、
to highlight yourchoice.
options
6.1.5 LANGUAGE SELECT (LANGUAGE SETTING)
ENGLISH
CHINESE
RETURN
ENGLISH
CHINESE
1.Press MENU to enter submenu, then press ENTER to open LANGUAGE SELECT
menu
2.Select a language, then press ENTER to confirm.
6.1.6 EXIT
press ENTER/MENU to quit OSDadjust.
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 TV MODE SETTINGS
Menu:
VIDEO ADJUST
OSD ADJUST
INPUT SELECT
TV FUNCTION
TV MODE
AUDIO
LANGUAGE SELECT
EXIT
The Operation forVIDEO ADJUST、OSD ADJUST、INPUT SELECT、AUDIO、
LANGUAGE SELECT、EXIT are thesame for VIDEO、MEDIA PLAYER mode are
same, here arethe details ofTV function and TV mode setting.
6.2.1 TV FUNCTION
AUTO SCAN
MANU SCAN
FINE TUNE
PRESET PROGRAMS
SKIP PROGRAMS
SELECT PROGRAMS
TV Function Menu
Auto search channels
AUTO SCAN
MANU SCAN
Manual search channels
Covering manually fullchannel width, tothe highest levelof
performance.
FINE TUNE
Able to changechannels' sequence.
PRESET PROGRAMS
This function forskip a channel,
a skip channel.
on remote controlto select
SKIP PROGRAMS
This function forselect channel onthe machine buttons,
machine to selectchannels.
on
SELECT PROGRAMS
1.Press remotecontrol direction keyto select, andpress ENTER / MENU to confirm
2.Select PRESET PROGRAMS setup selection, press to adjust theaimed channel
in the mid-bottomof OSD menu, press ENTER /MENU to realize presetfunction
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.2 TV MODE
TV MODE
NTSC
PAL B/G
PAL I
PAL D/K
RETURN
TV MODE
NTSC
US, Japan, South Korea
Germany, Italy, Spain, Saudi Arabia and
other countries adopting PALB/G
PALB/G
PAL I
Hong Kong, UK.
China
PALD/K
1. Select ENTER / MENU to enter submenu，press
2.Then press ENTER / MENU to confirm.
button on remote control.
7
TV Mode Control Menu
7.1 AUTO CHANNEL SEARCH
First time useor TV moved to newarea, needs toprocess auto channelsearch.
1.In TV Playing mode, pressMENU to entersubmenu.(Please compare systemsetting
part in thefront page.)
2.Press
3.Press
on theremote control toTV Menu, then press ENTER to enter setting.
on theremote control toAuto ChannelScan, press ENTER to enter Auto
Channel Scan . After autoscan finished, therewill be autoplay first channel, and
channels can bewatch normally.
4.To stopAuto Scan, press ENTER Key to quit.
7.2 CHANNEL SELECTION
To selectchannels, press or enter number of a channel on the remote control, then
press ENTER to confirm. Also Channel Selection can be found in the submenu for select
channels.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 DISPLAY CHANNEL
While TV is in playingmode，press DISPLAYto shown channelnumber on thetop right
corner screen.
7.4 CHANNEL RECALL
While TV is in playingmode, press ENTER to go backprevious channel.
8
AV Input/Output User Instruction
This product hasAV Connection. AV Device candirectly connect with DVD, VCD player
(PS. AV M statusneeds to change to, whichAV input turnson)
User Instruction below：
AV Input &Output can be control by the switch.
AV Input: VIDEO Input (Connect DVD/VCD AV Output),AUDIO Input (Connect DVD
/VCD AudioOutput) , needs to switch status to IN, then digital frame playing mode switch
to Video mode, then AV signal canbe play.
Instruction：
First ThingAV Signal Cableconnected follow by color:
1.TakeDVD, VCD's VIDEO（Yellow）Connect to AlbumTV's VIDEOAV.
2.TakeDVD, VCD'sAUDIO（Red、White）Connect to Album TV's AUDIOAV.
Then switch Digital frame's mode to VIDEO:
1. Press MENU into OSD system menu.
2. Press switch to INPUT SELECT screen.
3. Select VIDEO input mode, ENTER to confirm VIDEOinput mode.
Finished Instruction above will be able to watching DVD,VCD.
AV Output StatusDescription: SystemAV Signal canbe output, need to connectAV input,
then can play media fromAlbum TV. Let Video Input/output switch to Out, also digital
frame playing mode change to MEDIAPLAYER, then it will be able to play.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Specifications
Panel: 10.4 TFT LCD
Active Area: 211.2 mm(H)*158.4(V)mm
Resolution: 640(W)*480(H)
Horizontal frequency (H):30－80KHZ
Vetical frequency (V): 60/75HZ
Lamp Lifetime: 50,000Hours
Brightness: 330cd/m2
Contract Ratio: 250 : 1
View Angle: Vertical110 / Horizontal 140
Input Power: DC 12V, 1.5A
Power Consumption: 25W
Supported Multimedia File: MPEG 1, MPEG 2
MP3, WMA
JPEG
Supported Memory card: CF, SM, SD, MMC, MS, MS PRO, IBM MICRODRIVE
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Shanghai VisartTechnologiesCo., Ltd.
Room 906 HongcaoBuilding, 421 Hongcao Road
Shanghai, China, P. R.
200233
Tel: 86-21-64955920
Fax: 86-21-64955921
VISART USACorporation
1211 JohnReed Court,
City of Industry, CA91745
Tel: 1-626-855-3486
Fax:1-626-855-1145
Toll free: 1-866-4-VISART
Download from Www.Somanuals.com. All Manuals Search And Download.
|