Viper Automobile Alarm 135HF User Manual

MODEL  
135 HF  
OWNER'S GUIDE  
03/00 and up  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUD-  
ED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COM-  
MERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO THE EXCLU-  
SION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WAR-  
RANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF  
NON-INFRINGEMENT OF PATENTS, IN THE UNITED STATES OF AMERICA AND/OR  
ABROAD. NEITHER THE MANUFACTURER OR ANY ENTITIES CONNECTED THEREWITH  
SHALL BE RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT  
NOT LIMITED TO ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, TOWING,  
REPAIR, REPLACEMENT, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL  
LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE  
ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR  
THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on  
how long an implied warranty will last or the exclusion or limitation of incidental or  
consequential damages. This warranty gives you specific legal rights, and you may  
also have other rights which vary from state to state.  
IMPORTANT NOTE:  
This product warranty is automatically void if its date code or serial number is  
defaced, missing, or altered. This warranty will not be valid unless you have com-  
pleted the warranty card and mailed it to Directed Electronics, Inc. within 10 days  
after purchase to the address listed on the warranty registration card.  
Make sure you have all of the following information from your dealer:  
A clear copy of the sales receipt, showing the following:  
I Date of purchase  
I Your full name and address  
I Authorized dealer's company name and address  
I Type of system installed  
I Year, make, model and color of the automobile  
I Automobile license number  
I Vehicle identification number  
I All security options installed on automobile  
I Installation receipts  
ii  
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Limited Lifetime Consumer Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i  
What Is Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Important Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Your Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
FCC/ID Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Transmitter Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Standard Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Using Your System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Warning! Safety First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Unlocking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Ignition Controlled Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Remote Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Timer Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Valet® Take-Over. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Using Remote Start with Factory Remote Systems . . . . . . . . . . . . . . . . . . . . . . 12  
Programming Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Quick Reference Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
1
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
Standard Configuration  
2
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
What is Included  
I The control module  
I A two-button transmitter  
I A push-button programming switch  
I Your warranty card  
I A shut-down toggle switch  
Important Information  
Congratulations on the purchase of your remote start keyless entry  
system. This system has been designed to provide years of trouble-  
free operation. By carefully reading this owner's guide prior to  
using your system, you will maximize the use of this system and  
its features. Additional or replacement copies of this guide can be  
System Maintenance  
The system requires no specific maintenance. Your remote is pow-  
ered by a miniature 12V battery, type GP23A, that lasts approxi-  
mately one year under normal use. When the battery weakens, the  
LED on the remote will dim and operating range will be reduced.  
3
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your Warranty  
Your warranty card must be completely filled out and returned  
within 10 days of purchase. Your product warranty will not be hon-  
ored if your warranty card is not returned. Make sure that you  
receive the warranty card from your dealer.  
FCC/ID Notice  
This device complies with Part 15 of FCC rules. Operation is subject  
to the following two conditions: (1) This device may not cause  
harmful interference, and (2) This device must accept any interfer-  
ence received, including interference that may cause undesired  
operation.  
Changes or modifications not expressly approved by the party  
responsible for compliance could void the user's authority to oper-  
ate this device.  
Caution  
This product is designed for fuel injected, automatic transmission  
vehicles only. Use of this product in a standard transmission vehi-  
cle is dangerous and contrary the product's intended use.  
4
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
Transmitter Functions  
The receiver uses a computer-based learn routine to learn the  
transmitter buttons. This makes it possible to assign any specific  
transmitter button, or combination of buttons, to any receiver  
function. The transmitter initially comes programmed with the  
Standard Configuration, but may also be customized by an autho-  
rized dealer. Unless otherwise specified, the buttons used in all of  
the instructions in this manual correspond to a Standard  
Configuration transmitter.  
Standard Configuration  
Button I  
The door locking and unlocking functions are controlled by press-  
ing  
.
Button II  
Timer Mode is controlled by  
.
Button I and II  
The remote start function of your system is controlled by pressing  
and simultaneously.  
5
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your System  
Warning! Safety First  
The following safety warnings must be observed at all times:  
I Due to the complexity of this system, installation of this  
product must only be performed by an authorized DEI dealer.  
I When properly installed, this system can start the vehicle via  
a command signal from the remote control transmitter.  
Therefore, never operate the system in an enclosed area or  
partially enclosed area without ventilation (such as a garage).  
When parking in an enclosed or partially enclosed area or  
when having the vehicle serviced, the remote start system  
must be disabled using the installed toggle switch. It is the  
user's sole responsibility to properly handle and keep out of  
reach from children all remote control transmitters to assure  
that the system does not unintentionally remote start the  
vehicle. THE USER MUST INSTALL A CARBON MONOXIDE  
DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE  
VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING  
AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE  
STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED. These  
precautions are the sole responsibility of the user.  
I Use of this product in a manner contrary to its intended mode  
of operation may result in property damage, personal injury,  
6
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
or death. (1) Never remotely start the vehicle with the vehi-  
cle in gear, and (2) Never remotely start the vehicle with the  
keys in the ignition. The user must also have the neutral safe-  
ty feature of the vehicle periodically checked, wherein the  
vehicle must not remotely start while the car is in gear. This  
testing should be performed by an authorized DEI dealer in  
accordance with the Safety Check outlined in the product  
installation guide. If the vehicle starts in gear, cease remote  
start operation immediately and consult with the authorized  
DEI dealer to fix the problem.  
I After the remote start module has been installed, contact your  
authorized dealer to have him or her test the remote start  
module by performing the Safety Check outlined in the prod-  
uct installation guide. If the vehicle starts when performing  
the Neutral Safety Shutdown Circuit test, the remote start unit  
has not been properly installed. The remote start module must  
be removed or the installer must properly reinstall the remote  
start system so that the vehicle does not start in gear. All  
installations must be performed by an authorized DEI dealer.  
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE  
STARTS IN GEAR IS CONTRARY TO ITS INTENDED MODE OF  
OPERATION. OPERATING THE REMOTE START SYSTEM UNDER  
THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR  
PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE  
OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED  
DEI DEALER TO REPAIR OR DISCONNECT THE INSTALLED  
REMOTE START MODULE. DEI WILL NOT BE HELD RESPONSI-  
BLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.  
7
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locking  
Pressing  
for one second will lock the doors. The parking lights  
will flash once to confirm that the doors are locked.  
NOTE: Power door lock control is an optional feature. Extra parts and  
labor may be necessary for your system to interface with your vehicle’s  
power door locks.  
Unlocking  
To unlock the doors press  
for one second. The parking lights  
will flash twice to confirm that the doors are unlocked.  
Ignition Controlled Door Locks  
If power door locks have been  
connected to your system,  
the vehicle's door will lock  
three seconds after the  
ignition has been turned on  
and unlock when the ignition  
is turned off.  
NOTE: If the ignition is turned on while the vehicle is remote started the  
doors will not lock until the remote start shuts off. To avoid being locked  
out of the vehicle, do not turn the ignition on until you are ready to drive  
the vehicle.  
8
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Start  
This feature allows you to remotely start and run your vehicle for  
a programmable period of time. This makes it possible to warm up  
the engine, as well as adjust the interior temperature of the vehi-  
cle with the climate control system. If interior heating or cooling  
is desired, the climate controls must be preset, and the fan blower  
must be set to the desired level prior to remote starting the  
vehicle.  
IMPORTANT! (1) Never remotely start the vehicle with the vehicle in gear,  
and (2) Never remotely start the vehicle with the key in the ignition.  
To remote start the vehicle:  
1. Simultaneously press  
second.  
and  
on the transmitter for one  
2. The parking lights will flash to confirm remote start operation.  
3. Once the vehicle has started, it will run for the pre-program-  
med period of time (12, 24, or 60 minutes) or until a shut-  
down input is triggered.  
When you are ready to drive the vehicle:  
1. Insert the ignition key and turn it to the ON  
(not the START) position.  
2. Press the brake pedal.  
NOTE: If the brake pedal is pressed before the key is  
in the ON position, the engine will shut down.  
9
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
While the vehicle is running during remote start operation, the  
system will monitor the vehicle and will automatically shut down  
the engine if the system receives any of the following shut-down  
inputs:  
I The brake pedal is pressed.  
I The hood is opened.  
I The shutdown toggle switch is put into the ON position.  
I The pre-programmed run time has elapsed.  
I Buttons  
and  
are pressed again.  
To shut down the remote start and turn off the engine:  
I Step on the brake pedal, or  
I Press  
and  
for one second.  
Timer Mode  
Timer Mode automatically starts the engine and runs it for a pre-  
programmed time period, every three hours for a total of six oper-  
ation cycles. This feature helps to ensure that your engine will  
start in the morning after a night of extremely cold temperatures.  
IMPORTANT! This feature must only be used in open areas, never in an  
enclosed area such as a garage.  
To enter Timer Mode:  
1. Start the vehicle by pressing and releasing  
2. Press and release  
and  
.
.
3. Within two seconds press and release  
and  
again.  
10  
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
The engine will shut down and the parking lights will flash four  
times. The engine will then restart to confirm that Timer Mode has  
been entered.  
The engine may be allowed to run for its preset time or can be  
shut down by pressing Buttons  
and  
again. Either way, it  
will restart every three hours for a total of six cycles. If the unit  
receives a shutdown input while operating in the timer mode the  
engine will stop, but will restart, on schedule, again in three hours!  
To exit Timer Mode:  
Timer Mode can be exited by turning the ignition on with the key  
any time the engine is not running. You can also exit Timer Mode  
manually from the transmitter by following these steps:  
1. Start the engine by pressing  
2. Press and release  
3. Within two seconds press and release  
and  
.
.
and  
again.  
4. The engine will shut down and the parking lights will flash  
four times to confirm that Timer Mode has been exited. If the  
car has already been remote started, skip Step One.  
®
Valet Take-Over  
The Valet® Take-Over feature allows the vehicle to remain running  
after the key has been removed from the ignition. This feature is  
useful for occasions when you wish to exit and lock the vehicle for  
short periods of time, but would like to leave the motor running  
and the climate controls on.  
11  
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
To perform Valet Take-Over:  
1. Before turning off the engine, press and release  
and  
on the transmitter (or press and release the optional Momen-  
tary switch).  
2. Turn the ignition key to the OFF position.  
(The engine will stay running.)  
3. The engine will run until the pre-programmed time elapses or  
a shut-down input is received. (See the previous Remote Start  
section for a complete list of shut-down inputs.)  
NOTE: This feature will not work if the brake pedal is being pressed.  
Using Remote Start with Factory Remote Systems  
This remote start system is also designed to interface with most  
original equipment from manufacturer (OEM) factory remote sys-  
tems. The Remote Start/Valet Take-Over sequence can be pro-  
grammed to initiate with one to three (1-3) presses of one of the  
OEM transmitter buttons. Consult with your dealer to determine  
the transmitter button and the number of presses (1-3) that have  
been programmed for this sequence. Spaces are provided below for  
writing in the button and number of button presses.  
OEM transmitter button used for Remote Start/Valet Take-Over  
sequence____________________________________________  
Number of presses required to initiate Remote Start/Valet  
Take-Over sequence___________________________________  
12  
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Options  
Programming options control your system's normal, operational  
set-up. Most options do not require additional parts, but some may  
require installation labor.  
The following is a list of the programmable options, with the fac-  
tory settings in Bold.  
I 12, 24, or 60 minute run time. Your system can be pro-  
grammed to allow the vehicle to run for 12, 24, or 60 min-  
utes when remote started.  
I Parking lights flashing or constant. Your system can be pro-  
grammed to turn on the parking lights for the entire remote  
start operation.  
Glossary of Terms  
Control Unit: The “brain” of your system. Usually hidden under-  
neath the dash area of the vehicle. It houses the microprocessor  
which monitors your vehicle and controls all the system functions.  
Transmitter: A hand-held, remote control which operates the var-  
ious functions of your system.  
13  
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK REFERENCE GUIDE:  
To lock the doors using your remote  
I Pressing  
for one second will lock the doors. The parking lights will  
flash once to confirm the doors are locked. NOTE: Control of power door  
locks is optional. Extra parts and labor may be necessary to interface  
with power door locks.  
To unlock the doors using your remote  
I To unlock the doors, press  
for one second. The parking lights will  
flash twice to confirm the doors are unlocked.  
To remote start the vehicle  
I Press  
and  
on the transmitter for one second. The parking lights  
will flash to confirm remote start operation. Once the remote start has  
been activated, the vehicle will run for the preprogrammed period or  
until a shutdown input is triggered.  
Using Remote Start with Factory Remote Systems  
I If this remote start system has been interfaced with an original equip-  
ment from manufacturer (OEM) factory remote system, the Remote  
Start/Valet Take-Over sequence can be programmed to initiate with one  
to three (1-3) presses of one of the OEM transmitter buttons.  
OEM transmitter button used for Remote Start/Valet Take-Over  
sequence______________________________________________  
Number of OEM transmitter button presses required to initiate  
Remote Start/Valet Take-Over sequence____________________  
14  
1999 Directed Electronics, Inc.  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
The company behind this system is Directed Electronics, Inc.  
Since its inception, DEI® has had one purpose, to provide consumers with the finest  
vehicle security and car stereo products and accessories available. The recipient of  
more than 20 patents in the field of advanced electronic technology, DEI is ISO 9001  
registered.  
Quality Directed Electronics products are sold and serviced throughout North America  
and around the world.  
Call (800) 274-0200 for more information about our products and services.  
DEI is committed to delivering on time, the best products we know how to provide,  
and to constantly work with our customers and vendors to improve our products, qual-  
ity, delivery and customer friendly features.  
®
Directed Electronics, Inc.  
Vista, CA 92083  
© 1999 Directed Electronics, Inc. - All rights reserved  
G551R 6/00  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Taylor Refrigerator model 430 torque shake slush freezer User Manual
Telex Car Speaker 1135 2907 User Manual
Tiffen Camera Accessories 80010 User Manual
TOA Electronics Film Camera C CC714 NT User Manual
Toshiba Laptop 1110 User Manual
TP Link Network Router 411 1910011002 User Manual
Tricity Bendix Microwave Oven TRIC750E User Manual
Uniden Portable Radio uh049sx 2 User Manual
Victor Enterprise Stereo Amplifier KS AR8002D User Manual
Walker Indoor Furnishings WQ44CMPTB User Manual